Farm-Scale Cost of Producing Perennial Energy Cane as a Biofuel Feedstock

Energy cane varieties are high-fiber sugarcane clones which represent a promising feedstock in the production of alternative biofuels and biobased products. This study explored the crop establishment and whole farm production costs of growing energy cane as a biofuel feedstock in the southeastern USA. More specifically, total production costs on a feedstock dry matter biomass basis were estimated for five perennial energy cane varieties over alternative crop cycle lengths. Variable production costs for energy cane production were estimated to be in the $63 to $76 Mg^?1 range of biomass dry matter for crop cycles through harvest of fourth through sixth stubble crops. Total production costs, including charges for fixed equipment costs, general farm overhead, and land rent, were estimated to range between $105 and $127 Mg^?1 of feedstock biomass dry matter material.     

Impacts of management practices on bioenergy feedstock yield and economic feasibility on Conservation Reserve Program grasslands

Perennial grass mixtures planted on Conservation Reserve Program (CRP) land are a potential source of dedicated bioenergy feedstock. Long‐term nitrogen (N) and harvest management are critical factors for maximizing biomass yield while maintaining the longevity of grass stands. A six‐year farm‐scale study was conducted to understand the impact of weather variability on biomass yield, determine optimal N fertilization and harvest timing management practices for sustainable biomass production, and estimate economic viability at six CRP sites in the United States. Precipitation during the growing season was a critical factor for annual biomass production across all regions, and annual biomass production was severely reduced when growing season precipitation was below 50% of average. The N rate of 112 kg ha^?1 produced the highest biomass yield at each location. Harvest timing resulting in the highest biomass yield was site‐specific and was a factor of predominant grass type, seasonal precipitation, and the number of harvests taken per year. The use of N fertilizer for yield enhancement unambiguously increased the cost of biomass regardless of the harvest timing for all six sites. The breakeven price of biomass at the farmgate ranged from $37 to $311 Mg^?1 depending on the rate of N application, timing of harvesting, and location when foregone opportunity costs were not considered. Breakeven prices ranged from $69 to $526 Mg^?1 when the loss of CRP land rental payments was included as an opportunity cost. Annual cost of the CRP to the federal government could be reduced by over 8% in the states included in this study; however, this would require the biomass price to be much higher than in the case where the landowner receives the CRP land rent. This field research demonstrated the importance of long‐term, farm‐scale research for accurate estimation of biomass feedstock production and economic viability from perennial grasslands.     

Profitability of Willow Biomass Crops Affected by Incentive Programs

The economics of willow biomass crops are strongly influenced by yield, production, and harvesting costs and the delivered price for biomass. Under current management practices, willow biomass crops with yields of 12 oven-dried metric tons (odt)?ha^?1 year^?1 and a delivered price of $60 odt^?1 have an internal rate of return (IRR) of about 5.5 %. Yields below 9 odt ha^?1 year^?1 have an IRR <0 %. We examined the impact of different incentive programs on the returns from willow biomass crops and the hectares or tons of willow biomass supported across a range of yields. Incentive programs examined included establishment grants (EG), annual payments (AIP), low cost startup loans, and matching payments offered by two existing programs, the Conservation Resource Program (CRP) and more recently the Biomass Crop Assistance Program (BCAP). EGs covering 75 % of the establishment costs provide high returns for growers on medium to high-productivity sites. Stand-alone AIPs with payments of $124 ha^?1 year^?1 paid over 5–15 years had little impact on profitability for growers but were costly for a funding agency. Low-cost loans with an interest rate of 2–4 % are one of the least expensive approaches ($1.3–6.6 odt^?1) and improve profitability for medium- and high-yielding (8–16 odt ha^?1 year^?1) sites. A matching payment incentive providing $50 per odt delivered was the only individual incentive approach that made low-yielding sites (6 odt ha^?1 year^?1) profitable but was costly per odt compared to other incentives. Current CRP incentives made willow profitable across all productivity scenarios. The BCAP program generates higher profits for all productivity scenarios but comes at a higher cost. Effective financial incentives need to be well designed and monitored so that the target audience is reached and the intended policy goals are attained.     

Site-Specific Trade-offs of Harvesting Cereal Residues as Biofuel Feedstocks in Dryland Annual Cropping Systems of the Pacific Northwest,USA

Cereal residues are considered an important feedstock for future biofuel production. Harvesting residues, however, could lead to serious soil degradation and impaired agroecosystem services. Our objective was to evaluate trade-offs of harvesting wheat and barley residues including impacts on soil erosion and quality, soil organic C (SOC), and nutrient removal. We used agricultural data from 369 geo-referenced points on the 37-ha Washington State University Cook Agronomy Farm combined with model simulations to develop straw harvest scenarios for conventional tillage (CT) and no-tillage (NT) and both 2- and 3-year crop rotations with sequences of wheat, barley, and peas. Site-specific estimates of ethanol production from 2- and 3-year rotation scenarios ranged from 681 to 1,541 L ha^?1 yr^?1, indicating that both crop rotation and site-specific targeting of residue harvest are important factors. Harvesting straw reduced residue C inputs by 46 % and resulted in levels below that required to maintain SOC under CT. This occurred as a function of both straw harvest and low residue producing crops in rotation. Harvesting straw under CT was predicted to reduce soil quality as Soil Conditioning Indices (SCIs) were negative throughout the field. In contrast, SCIs under NT were positive despite straw harvest. Replacement value of nutrients (N, P, K, S) removed in harvested straw averaged $14.54 Mg^?1 dry straw and ranged from $36.04 to $80.30 ha^?1, while straw harvesting costs averaged $34.25 Mg^?1, and the current (2014) market value of straw is $65 Mg^?1. We concluded that substantial trade-offs exist in harvesting straw for biofuel, that trade-offs should be evaluated on a site-specific basis, and that support practices such as crop rotation, reduced tillage, and site-specific nutrient management need to be considered if residue harvest is to be sustainable.     

Economic Feasibility of Using Switchgrass Pasture to Produce Beef Cattle Gain and Bioenergy Feedstock

Integration of switchgrass (Panicum virgatum L.) into livestock production systems has potential to improve farm economics and encourage development of a biofuel industry in the Southern Great Plains. The objectives of this study were to determine the economics of seven alternative switchgrass grazing and bioenergy feedstock systems and to determine how sensitive the results are among the systems for a range of cattle and feedstock prices. Data were collected from a completely randomized designed grazing study in south-central Oklahoma in 2008, 2009, and 2010. Stocking density treatments [0, 2.5, 4.9 and 7.4 hd ha^?1] were randomly assigned to 12 0.81-ha switchgrass pastures. Using biological data from the field trial, economic data collected from the marketplace and assumptions about prices of bioenergy feedstock, seven production systems were simulated. The systems included no-graze feedstock only (NG/FS); graze lightly no feedstock (GL/NF); graze moderately no feedstock (GM/NF); graze heavily no feedstock H/NF)]; lightly grazed plus feedstock (GL/F); moderately grazed plus feedstock (GM/F); and heavily grazed plus feedstock (GH/F). Enterprise budgeting was used to compute expected net returns for the seven systems. Random-effects mixed ANOVA models were used to determine the effects of production system on yield, gain, and net return. At a feedstock price $0 Mg^?1, the GM/NF was the most profitable ($45 ha^?1) system. At feedstock prices of $55 and $83 Mg^?1, the GL/F system realized net returns of $232 and $523 ha^?1, respectively, and for feedstock prices >$83 Mg^?1, the NG/FS system was determined to be most economical.     

Quantifying Actual and Theoretical Ethanol Yields for Switchgrass Strains Using NIRS Analyses

Quantifying actual and theoretical ethanol yields from biomass conversion processes such as simultanteous saccharification and fermentation (SSF) requires expensive, complex fermentation assays, and extensive compositional analyses of the biomass sample. Near-infrared reflectance spectroscopy (NIRS) is a non-destructive technology that can be used to obtain rapid, low-cost, high-throughput, and accurate estimates of agricultural product composition. In this study, broad-based NIRS calibrations were developed for switchgrass biomass that can be used to estimate over 20 components including cell wall and soluble sugars and also ethanol production and pentose sugars released as measured using a laboratory SSF procedure. With this information, an additional 13 complex feedstock traits can be determined including theoretical and actual ethanol yields from hexose fermentation. The NIRS calibrations were used to estimate feedstock composition and conversion information for biomass samples from a multi-year switchgrass (Panicum virgatum L.) biomass cultivar evaluation trial. There were significant differences among switchgrass strains for all biomass conversion and composition traits including actual ethanol yields, ETOHL (L Mg^?1) and theoretical ethanol yields, ETOHTL (L Mg^?1), based on cell wall and non-cell wall composition NIRS analyses. ETOHL means ranged from 98 to 115 L Mg^?1 while ETOHTL means ranged from 203 to 222 L Mg^?1. Because of differences in both biomass yields and conversion efficiency, there were significant differences among strains for both actual (2,534?C3,720 L ha^?1) and theoretical (4,878?C7,888 L ha^?1) ethanol production per hectare. It should be feasible to improve ethanol yields per hectare by improving both biomass yield and conversion efficiency by using NIRS analyses to quantify differences among cultivars and management practices.     

Evaluating Local Crop Residue Biomass Supply: Economic and Environmental Impacts

The increasing interest in energy production from biomass requires a better understanding of potential local production and environmental impacts. This information is needed by local producers, biomass industry, and other stakeholders, and for larger scale analyses. This study models biomass production decisions at the field level using a case example of a biomass gasification facility constructed at the University of Minnesota??Morris (UMM). This institutional-scale application has an anticipated feedstock demand of about 8,000?Mg?year^?1. The model includes spatial impacts due to sub-field variation in soil characteristics and transportation costs. Results show that the amount of biomass producers could profitably supply within a 32.2-km radius of UMM increases as plant-gate biomass price increases from $59 to $84?Mg^?1, with 588,000?Mg annual biomass supply at $84?Mg^?1. Results also show that the most profitable tillage and crop rotation practices shift in response to increasing biomass price with producers shifting from a corn-soybean rotation toward continuous corn. While biomass harvest is conducive to increased soil erosion rates and reduced soil organic carbon levels, changes in crop production practices are shown to at least partially offset these impacts. Transportation costs tend to concentrate and intensify biomass production near the biomass facility, which also tends to concentrate environmental impacts near the facility.     

Economics of Alternative Fertilizer Supply Systems for Switchgrass Produced in Phosphorus-Deficient Soils for Bioenergy Feedstock

Limited information is available explaining the economics of supplying N and P fertilizers on established stands of switchgrass growing in phosphorus-deficient soils. The objective of this study was to determine the most economical fertilizer supply system for producing feedstock in phosphorus-deficient soil in the southern Great Plains. Data collected from field trials conducted at two locations in south-central Oklahoma along with prices quoted by local input suppliers and custom service providers and assumptions about the farm-gate price of feedstock were used to estimate expected values for production costs, gross revenue and net return to owner's labor, management, and overhead for eight fertilizer supply systems. The systems included a zero fertilizer check system (0/0), three P systems (0/34, 0/67, and 0/101), one N system (135/0), and three N and P systems (135/34, 135/67, and 135/101). Random-effects mixed ANOVA models were used to determine the effects of fertilizer system on the values of total cost and net return. For the base-case price scenario (feedstock, N and P prices of $110 Mg^?1 and $1.28 and 1.17 kg^?1, respectively), the 135/0 system was the most profitable system, producing 10.2 Mg of feedstock and $263 of net return per hectare. Economic results were most sensitive to the prices of feedstock, N and P. Net return was negative for all eight systems for the scenario where the farm-gate price of feedstock was relatively low ($55 Mg^?1) and prices for N and P were relatively high ($2.20 kg^?1).     

Nutrient Removal as a Function of Corn Stover Cutting Height and Cob Harvest

One-pass harvest equipment has been developed to collect corn (Zea mays L.) grain, stover, and cobs that can be used as bioenergy feedstock. Nutrients removed in these feedstocks have soil fertility implication and affect feedstock quality. The study objectives were to quantify nutrient concentrations and potential removal as a function of cutting height, plant organ, and physiological stage. Plant samples were collected in 10-cm increments at seven diverse geographic locations at two maturities and analyzed for multiple elements. At grain harvest, nutrient concentration averaged 5.5 g?N kg^?1, 0.5 g?P kg^?1, and 6.2 g?K kg^?1 in cobs, 7.5 g?N kg^?1, 1.2 g?P kg^?1, and 8.7 g?K kg^?1 in the above-ear stover fraction, and 6.4 g?N kg^?1, 1.0 g?P kg^?1, and 10.7 g?K kg^?1 in the below-ear stover fraction (stover fractions exclude cobs). The average collective cost to replace N, P, and K was $11.66 Mg^?1 for cobs, $17.59 Mg^?1 for above-ear stover, and $18.11 Mg^?1 for below-ear stover. If 3 Mg ha^?1 of above-ear stover fraction plus 1 Mg of cobs are harvested, an average N, P, and K replacement cost was estimated at $64 ha^?1. Collecting cobs or above-ear stover fraction may provide a higher quality feedstock while removing fewer nutrients compared to whole stover removal. This information will enable producers to balance soil fertility by adjusting fertilizer rates and to sustain soil quality by predicting C removal for different harvest scenarios. It also provides elemental information to the bioenergy industry.     

Cost-effective IMTA: a comparison of the production efficiencies of mussels and seaweed

This paper compares the biofilter capacity and cost-effectiveness of blue mussels (Mytilus edulis) and seaweed for use in integrated multi-trophic aquaculture (IMTA) based on experiences in Ireland and Denmark. This comparison shows that weight for weight, mussels are a better biofilter than seaweed with regard to the amount of nitrogen assimilated. Furthermore, in optimized systems, areal requirement for mussels is similar to the cultivation of the same tonnage (1,000 t) of seaweed (approximately 8 ha). The cost-effectiveness of a mussel biofilter is €11–30 kg^?1 nitrogen (N) removed based on various examples compared to production costs of €209–672 removed and €1,013 kg^?1 N removed, respectively, for Laminaria digitata and Alaria esculenta from extrapolated laboratory and field trials. However, commercial seaweed (Saccharina latissima) producers claim that production costs are less than €10–38 kg^?1 N removed. These up-scaled and commercial figures make the seaweed cost competitive to mussels for removal of nitrogen. Disadvantages such as predators (e.g. eider ducks) and biofouling should also be taken into account before choice of biofilter is made. These drawbacks can reduce overall biofilter capacity and biomass value as a consequence of biomass spoilage or loss. However, disadvantages may be mitigated by seasonal choice of cultivation and harvest times. Cultivation technologies and harvesting methods may be improved together with breeding to improve the cost-efficiency of the biofilter, especially in the newer European seaweed cultivation. Furthermore, upscaling of IMTA to commercial proportions, other than the Danish example, would allow more real data on production costs and revenues.     

Switchgrass Biofuel Production on Reclaimed Surface Mines: II. Feedstock Quality and Theoretical Ethanol Production

Switchgrass (Panicum virgatum L.), a warm-season perennial grass, is an important bioenergy crop candidate because it produces high biomass yields on marginal lands and on reclaimed surface mined sites. In companion studies, dry matter (DM) yields for Cave-in-Rock, Shawnee, and Carthage cultivars varied from 4.2 to 13.0 Mg ha^?1averaged over 6 years at the reclaimed Hampshire site, and fertilization increased yields of Cave-in-Rock at Black Castle and Coal Mac sites from 0.3 to 2 Mg ha^?1 during the first 3 years. The objective of these experiments was to compare the impacts of cultivar and soil amendments on biomass quality and theoretical ethanol production of switchgrass grown on surface mines with differing soil characteristics. Biomass quality was determined for fiber, ash, lignin, digestibility, and carbohydrate contents via near-infrared reflectance spectroscopy, and carbohydrates were used to calculate theoretical ethanol yield (TEY; L Mg^?1) and multiplied by biomass yield to calculate theoretical ethanol production (TEP; L ha^?1). Cultivars at the Hampshire site did not differ in TEY and ranged from 426 to 457 L Mg^?1. Theoretical ethanol production from Cave-in-Rock at Hampshire was 7350 L ha^?1, which was higher than other cultivars because of its greater biomass production. This TEP was higher than in other studies which predicted 4000 to 5000 L ha^?1. At the Black Castle and Coal Mac sites, fertilizer applications slightly affected biomass quality of switchgrass and TEY, but provided greater TEP as a function of increased yield. Similar to other findings, total switchgrass biomass production has more impact than compositional differences on TEP, so maximizing biomass production is critical for maximizing potential biofuel production. With appropriate soil substrates, fertilization, planning, and management, large areas of reclaimed surface mines can be converted to switchgrass stands to produce high biomass quality and yields to support a bioethanol industry.     

Economic Evaluation of Switchgrass Feedstock Production Systems Tested in Potassium-Deficient Soils

Limited information is available about the economic benefits and costs associated with managing switchgrass (Panicum virgatum L.) produced for bioenergy feedstock in the K-deficient soils common in the southern Great Plains. The objectives of this study were to determine the most economical production system for harvesting and managing N and K fertilizations on switchgrass stands and to determine how sensitive the results are to various feedstock and fertilizer market price scenarios. A 4-year agronomic field experiment was conducted on a K-deficient site in South Central Oklahoma; the treatments included two harvest systems (summer and winter (SW) and winter only (W)), two N rates (0 and 135 kg ha^?1), and two K rates (0 and 67 kg ha^?1). Enterprise budgeting techniques and mixed ANOVA models were used to determine and compare the effects of eight harvest/N/K systems on yield, total cost, revenue, and net return. The harvest/N/K systems evaluated included SW/0/0, SW/0/67, SW/135/0, SW/135/67, W/0/0, W/0/67, W/135/0, and W/135/67. Results revealed the SW/135/67 system produced significantly (P?>?0.0001) greater average yield compared to the other systems; however, the SW/0/0 system was the most (P?>?0.0001) economical, realizing an average net return of $415 ha^?1. Compared to the base–case net return of the SW/0/0 system, the value of the additional yield generated with the SW/135/67 system was less than the costs associated with the extra nutrients and additional harvest activity. For feedstock prices greater than $110 Mg^?1, the most economical system shifted from the SW/0/0 to favor the SW/135/67 system.     

Financial Analysis of the Cultivation of Short Rotation Woody Crops for Bioenergy in Belgium: Barriers and Opportunities

This paper analyses the financial performance of a poplar short rotation woody crop (SRWC) plantation in Belgium, from a farmer’s and an investor’s viewpoint, based on simulations from the newly developed model POPFINUA. The establishment, production and harvest costs were investigated to calculate the net present value (NPV) and the equivalent annual value (EAV) of the SRWC cultivation when the biomass chips were sold at a price of 40 € Mg^?1 with a moisture content (m.c.) of 50 %. The calculated NPVs were 229 and ?485 € ha^?1, and the EAVs equalled 16.3 and ?34.6 € ha^?1 year^?1 for the farmer’s and investor’s scenario, respectively. The break-even price at which the produced biomass could be sold at the farm gate excluding transport, handling, storage and profit margins of the involved companies was calculated using the levellised costs (LC) method and equalled 78.4 and 83.5 € oven-dried ton (odt)^?1 for the farmer’s and investor’s viewpoint, respectively. Three harvesting strategies, applied on a SRWC plantation of 18.1 ha in Flanders (Belgium), were studied and compared. It became clear that preference should be given to more economic, small-scale harvesters instead of large-scale self-propelled harvesters, given the relatively limited surface available for SRWCs in Belgium. Furthermore, the inclusion of transportation over a distance of 50 km by truck increased the LC by 15.1 € odt^?1. Moreover, subsidies such as establishment grants and/or yearly incentives proved indispensable to make this long-term investment profitable. This is particularly true for the scenario where an investor decides to cultivate SRWCs for energy purposes.     

The Economics of Biomass Collection and Transportation and Its Supply to Indiana Cellulosic and Electric Utility Facilities

With cellulosic energy production from biomass becoming popular in renewable energy research, agricultural producers may be called upon to plant and collect corn stover or harvest switchgrass to supply feedstocks to nearby facilities. Determining the production and transportation cost to the producer of corn stover or switchgrass and the amount available within a given distance from the plant will result in a per metric ton cost the plant will need to pay producers in order to receive sufficient quantities of biomass. This research computes up-to-date biomass production costs using recent prices for all important cost components including seed, fertilizer, herbicide, mowing/shredding, raking, baling, storage, handling, and transportation. The cost estimates also include nutrient replacement for corn stover. The total per metric ton cost is a combination of these cost components depending on whether equipment is owned or custom hired, what baling options are used, the size of the farm, and the transport distance. Total costs per dry metric ton for biomass with a transportation distance of 60 km ranges between $63 and $75 for corn stover and $80 and $96 for switchgrass. Using the county quantity data and this cost information, we then estimate biomass supply curves for three Indiana coal-fired electric utilities. This supply framework can be applied to plants of any size, location, and type, such as future cellulosic ethanol plants. Finally, greenhouse gas emissions reductions are estimated from using biomass instead of coal for part of the utility energy and also the carbon tax required to make the biomass and coal costs equivalent. Depending on the assumed CO₂ price, the use of biomass instead of coal is found to decrease overall costs in most cases.     

Growth of microalgae Botryococcus sp. in domestic wastewater and application of statistical analysis for the optimization of flocculation using alum and chitosan

Microalga biomass has been recognized as a sustainable bio-product to replace terrestrial biomass in biofuel production. The microalga industry has high operating costs, specifically on harvesting and biomass recovery. Therefore, the development of an efficient harvesting method is crucial to the minimization of production cost. A statistical analysis through response surface methodology was used to investigate the optimization of harvesting efficiency using alum and chitosan as a coagulant. Growth rate and biomass productivity were also determined. This research revealed that the harvesting efficiency using alum was 99.3%, with optimum dosage and pH of 177.74 mg L^?1 and 8.24, respectively. Chitosan achieved 94.2% biomass recovery at an optimal dosage of 169.95 mg L^?1 at pH of 12. Moreover, Botryococcus sp. achieved the maximum growth of 0.7551 µ_max d^?1, with an average total biomass productivity of 9.81 mg L^?1?d^?1 in domestic wastewater. Overall, this study shows that both alum and chitosan coagulants have great potential for efficient microalgal biomass recovery. It suggests that domestic wastewater as a potential growth medium for the large-scale production of microalga biomass.     

Yield and Nitrogen Removal of Bioenergy Grasses as Influenced by Nitrogen Rate and Harvest Management in the Coastal Plain Region of North Carolina

The agronomic performances of giant miscanthus (Miscanthus x giganteus) and switchgrass (Panicum virgatum L.) grown as bioenergy grasses are still unclear in North Carolina, due to a relatively short period of introduction. The objectives of the study were to compare the biomass yield and annual N removal of perennial bioenergy grasses and the commonly grown coastal bermudagrass [Cynodon dactylon (L.) Pers.], and to determine the optimum N rates and harvest practices for switchgrass and miscanthus. A 4-year field trial of the grasses under five annual harvest frequencies (May/Oct, June/Oct, July/Oct, Aug/Oct, and October only) and five annual N rates (0, 67,134, 202, and 268 kg N ha^?1) was established at a research farm in Eastern North Carolina in 2011. Across harvest treatments and N rates, greatest biomass was achieved in the second growth year for both miscanthus (19.0 Mg ha^?1) and switchgrass (15.9 Mg ha^?1). Grasses demonstrated no N response until the second or the third year after crop establishment. Miscanthus reached a yield plateau with a N rate of 134 kg ha^?1 since achieving plant maturity in 2013, whereas switchgrass demonstrated an increasing fertilizer N response from 134 kg N ha^?1 in the third growth year (2014) to 268 kg N ha^?1 in the fourth growth year (2015). The two-cut harvest system is not recommended for bioenergy biomass production in this region because it does not improve biomass yield and increased N removal leads to additional costs.     

Improving the Profitability of Willow Crops��Identifying Opportunities with a Crop Budget Model

Short-rotation woody crops like shrub willow are a potential source of biomass for energy generation and bioproducts. However, since willow crops are not widely grown in North America, the economics of this crop and the impacts of key crop production and management components are not well understood. We developed a budget model, EcoWillow v1.4 (Beta), that allows users to analyze the entire production-chain for willow systems from the establishment to the delivery of wood chips to the end-user. EcoWillow was used to analyze how yield, crop management options, land rent, fuel, labor, and other costs influence the Internal Rate of Return (IRR) of willow crop systems in upstate New York. We further identified cost variables with the greatest potential for reducing production and transport costs of willow biomass. Productivity of 12 oven-dried tons (odt) ha^?1 year^?1 and a biomass price of $ (US dollars) 60 odt^?1 results in an IRR of 5.5%. Establishment, harvesting, and transportation operations account for 71% of total costs. Increases in willow yield, rotation length, and truck capacity as well as a reduction in harvester down time, land costs, planting material costs, and planting densities can improve the profitability of the system. Results indicate that planting speed and fuel and labor costs have a minimal effect on the profitability of willow biomass crops. To improve profitability, efforts should concentrate on (1) reducing planting stock costs, (2) increasing yields, (3) optimizing harvesting operations, and (4) co-development of plantation designs with new high-yielding clones to reduce planting density.     

Crop Residue Harvest Economics: An Iowa and North Dakota Case Study

Rigorous economic analyses are crucial for the successful launch of lignocellulosic bioenergy facilities in 2014 and beyond. Our objectives are to (1) introduce readers to a query tool developed to use data downloaded from the Agricultural Research Service (ARS) REAPnet for constructing enterprise budgets and (2) demonstrate the use of the query tool with REAPnet data from two field research sites (Ames, IA, and Mandan, ND) for evaluating short-term economic performance of various biofuel feedstock production strategies. Our results for both sites showed that short-term (<3 years) impacts on grain profitability were lower at lower average annual crop residue removal rates. However, it will be important to monitor longer term changes to see if grain profitability declines over time and if biomass harvest degrades soil resources. Analyses for Iowa showed short-term breakeven field-edge biomass prices of $26–$42 Mg^?1 among the most efficient strategies, while results for North Dakota showed breakeven prices of $54–$73 Mg^?1. We suggest that development of the data query tool is important because it helps illustrate several different soil and crop management strategies that could be used to provide sustainable feedstock supplies.     

Carbon cycling and net ecosystem production at an early stage of secondary succession in an abandoned coppice forest

Secondary mixed forests are one of the dominant forest cover types in human-dominated temperate regions. However, our understanding of how secondary succession affects carbon cycling and carbon sequestration in these ecosystems is limited. We studied carbon cycling and net ecosystem production (NEP) over 4 years (2004–2008) in a cool-temperate deciduous forest at an early stage of secondary succession (18 years after clear-cutting). Net primary production of the 18-year-old forest in this study was 5.2 tC ha^?1 year^?1, including below-ground coarse roots; this was partitioned into 2.5 tC ha^?1 year^?1 biomass increment, 1.6 tC ha^?1 year^?1 foliage litter, and 1.0 tC ha^?1 year^?1 other woody detritus. The total amount of annual soil surface CO₂ efflux was 6.8 tC ha^?1 year^?1, which included root respiration (1.9 tC ha^?1 year^?1) and heterotrophic respiration (RH) from soils (4.9 tC ha^?1 year^?1). The 18-year forest at this study site exhibited a great increase in biomass pool as a result of considerable total tree growth and low mortality of tree stems. In contrast, the soil organic matter (SOM) pool decreased markedly (?1.6 tC ha^?1 year^?1), although further study of below-ground detritus production and RH of SOM decomposition is needed. This young 18-year forest was a weak carbon sink (0.9 tC ha^?1 year^?1) at this stage of secondary succession. The NEP of this 18-year forest is likely to increase gradually because biomass increases with tree growth and with the improvement of the SOM pool through increasing litter and dead wood production with stand development.     

Determinants of the economic viability of mallee eucalypts as a short rotation coppice crop integrated into farming systems of Western Australia

Mallee eucalypts are being developed as a short rotation coppice crop for integration into agricultural systems in the south‐west of Western Australia. These have potential for biomass production for bioenergy, eucalyptus oil and generating carbon credits and to help control the extensive occurrence of dryland salinity. Some 12,000 ha of mallee planting has been undertaken since 1994, mostly in the form of wide‐spaced, narrow belts within the annual agricultural system. Production and market data were used to estimate levelized costs (LC) of mallee biomass production under different harvest regimes across 11 sites from 2006 to 2012. We found LC ranged from AUD40 to AUD257 fresh Mg^?1. LC was most strongly determined by mallee production, followed by the crop/pasture rotation decisions of the landholder. Mallee harvest regime had minor impact on LC. Crop and pasture yield loss due to competition from the mallee belts accounted for 38% of costs, harvesting biomass was 32%, opportunity cost of the land occupied by the mallee belts was 16% while establishment and maintenance costs accounted for 14% of the costs. When income from carbon sequestered in mallee root biomass was included, the LC dropped by an average of 11% at the current Australian price of AUD15 Mg^?1 CO₂ equivalent (CO₂e). The income from carbon sequestered in root biomass alone is unlikely to make mallee agroforestry economically viable. Hence, income from harvested biomass in the form of feedstocks for industry or carbon credits is necessary to make mallee agroforestry commercially attractive. LC for unharvested mallee belts ranged from AUD33 to AUD237 Mg^?1. Where above‐ and below‐ground biomass is converted to CO₂e at AUD15 Mg^?1, the LC drops to AUD11–AUD64, with three of 11 sites likely to be profitable. These three sites were characterized by high biomass production with low agricultural gross margins.