Purification and characterization of <Emphasis Type="SmallCaps">l</Emphasis>-arabinose isomerase from <Emphasis Type="Italic">Lactobacillus plantarum</Emphasis> producing <Emphasis Type="SmallCaps">d</Emphasis>-tagatose

l-arabinose isomerase (EC5.3.1.4. AI) mediates the isomerization of d-galactose into d-tagatose as well as the conversion of l-arabinose into l-ribulose. The AI from Lactobacillus plantarum SK-2 was purified to an apparent homogeneity giving a single band on SDS–PAGE with a molecular mass of 59.6 kDa. Optimum activity was observed at 50°C and pH 7.0. The enzyme was stable at 50°C for 2 h and held between pH 4.5 and 8.5 for 1 h. AI activity was stimulated by Mn²⁺, Fe³⁺, Fe²⁺, Ca²⁺ and inhibited by Cu²⁺, Ag⁺, Hg²⁺, Pb²⁺. d-galactose and l-arabinose as substrates were isomerized with high activity. l-arabitol was the strongest competitive inhibitor of AI. The apparent Michaelis–Menten constant (K _m), for galactose, was 119 mM. The first ten N-terminal amino acids of the enzyme were determined as MLSVPDYEFW, which is identical to L. plantarum (Q88S84). Using the purified AI, 390 mg tagatose could be converted from 1,000 mg galactose in 96 h, and this production corresponds to a 39% equilibrium.     

Expression and identification of a thermostable malate dehydrogenase from multicellular prokaryote <Emphasis Type="Italic">Streptomyces avermitilis</Emphasis> MA-4680

A malate dehydrogenase (MDH) from Streptomyces avermitilis MA-4680 (SaMDH) has been expressed and purified as a fusion protein. The molecular mass of SaMDH is about 35 kDa determined by SDS-PAGE. The recombinant SaMDH has a maximum activity at pH 8.0. The enzyme shows the optimal temperature around 42°C and displays a half-life (t _1/2) of 160 min at 50°C which is more thermostable than reported MDHs from most bacteria and fungi. The k _cat value of SaMDH is about 240-fold of that for malate oxidation. In addition, the k _cat/K _m ratio shows that SaMDH has about 1,246-fold preference for oxaloacetate (OAA) reduction over l-malate oxidation. The recombinant SaMDH may also use NADPH as a cofactor although it is a highly NAD(H)-specific enzyme. There was no activity detected when malate and NADP⁺ were used as substrates. Substrate inhibition studies show that SaMDH activity is strongly inhibited by excess OAA with NADH, but is not sensitive to excess l-malate. Enzymatic activity is enhanced by the addition of Na⁺, NH₄ ⁺, Ca²⁺, Cu²⁺ and Mg²⁺ and inhibited by addition of Hg²⁺ and Zn²⁺. MDH is widely used in coenzyme regeneration, antigen immunoassays and bioreactors. The enzymatic analysis could provide the important basic knowledge for its utilizations.     

Cloning, purification, and characterization of a thermostable alpha-L-arabinofuranosidase from Anoxybacillus kestanbolensis AC26Sari

The gene, AbfAC26Sari, encoding an α-l-arabinofuranosidase from Anoxybacillus kestanbolensis AC26Sari, was isolated, cloned, sequenced, and characterizated. On the basis of amino acid sequence similarities, this 57-kDa enzyme could be assigned to family 51 of the glycosyl hydrolase classification system. Characterization of the purified recombinant α-l-arabinofuranosidase produced in Escherichia coli BL21 revealed that it is active at a broad pH range (pH 4.5 to 9.0) and at a broad temperature range (45–85°C) and it has an optimum pH of 5.5 and an optimum temperature of 65°C. Kinetic experiment at 65°C with p-nitrophenyl α-l-arabinofuranoside as a substrate gave a V _max and K _m values of 1,019 U/mg and 0.139 mM, respectively. The enzyme had no apparent requirement of metal ions for activity, and its activity was strongly inhibited by 1 mM Cu²⁺ and Hg²⁺. The recombinant arabinofuranosidase released l-arabinose from arabinan, arabinoxylan, oat spelt xylan, arabinobiose, arabinotriose, arabinotetraose, and arabinopentaose. Endoarabinanase activity was not detected. These findings suggest that AbfAC26Sari is an exo-acting enzyme.     

A thermoalkaliphilic lipase of <Emphasis Type="Italic">Geobacillus</Emphasis> sp. T1

A thermoalkaliphilic T1 lipase gene of Geobacillus sp. strain T1 was overexpressed in pGEX vector in the prokaryotic system. Removal of the signal peptide improved protein solubility and promoted the binding of GST moiety to the glutathione-Sepharose column. High-yield purification of T1 lipase was achieved through two-step affinity chromatography with a final specific activity and yield of 958.2 U/mg and 51.5%, respectively. The molecular mass of T1 lipase was determined to be approximately 43 kDa by gel filtration chromatography. T1 lipase had an optimum temperature and pH of 70°C and pH 9, respectively. It was stable up to 65°C with a half-life of 5 h 15 min at pH 9. It was stable in the presence of 1 mM metal ions Na⁺, Ca²⁺, Mn²⁺, K⁺ and Mg²⁺ , but inhibited by Cu²⁺, Fe³⁺ and Zn²⁺. Tween 80 significantly enhanced T1 lipase activity. T1 lipase was active towards medium to long chain triacylglycerols (C10–C14) and various natural oils with a marked preference for trilaurin (C12) (triacylglycerol) and sunflower oil (natural oil). Serine and aspartate residues were involved in catalysis, as its activity was strongly inhibited by 5 mM PMSF and 1 mM Pepstatin. The T _m for T1 lipase was around 72.2°C, as revealed by denatured protein analysis of CD spectra.     

De novo synthesis,constitutive expression of <Emphasis Type="Italic">Aspergillus sulphureus</Emphasis> β-xylanase gene in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and partial enzymic characterization

The endo-β-1, 4-xylanase gene xynA from Aspergillus sulphureus, encoded a lack-of-signal peptide protein of 184 amino acids, was de novo synthesized by splicing overlap extension polymerase chain reaction according to Pichia pastoris protein’s codon bias. The synthetic DNA, composed of 572 nucleotides, was ligated into the downstream sequence of an α-mating factor in a constitutive expression vector pGAPzαA and electrotransformed into the P. pastoris X-33 strain. The transformed yeast screened by Zeocin was able to constitutively secrete the xylanase in yeast–peptone–dextrose liquid medium. The heterogenous DNA was stabilized in the strain by 20-times passage culture. The recombinant enzyme was expressed with a yield of 120 units/mL under the flask culture at 28°C for 3 days. The enzyme showed optimal activity at 50°C and pH 2.4–3.4. Residual activity of the raw recombinant xylanase was not less than 70% when fermentation broth was directly heated at 80°C for 30 min. However, the dialyzed xylanase supernatant completely lost the catalytic activity after being heated at 60°C for 30 min. The recombinant xylanase showed no obvious activity alteration by being pretreated with Na₂HPO₄-citric acid buffer of pH 2.4 for 2 h. The xylanase also showed resistance to certain metal ions (Na⁺, Mg²⁺, Ca²⁺, K⁺, Ba²⁺, Zn²⁺, Fe²⁺, and Mn²⁺) and EDTA. These biochemical characteristics suggest that the recombinant xylanase has a prospective application in feed industry as an additive.     

Cloning, expression and characterization of a thermostable exo-β-D-glucosaminidase from the hyperthermophilic archaeon Pyrococcus horikoshii

An exo-β-d-glucosaminidase gene (PH0511) was cloned from the hyperthermophilic archaeon, Pyrococcus horikoshii, and expressed in Escherichia coli. The purified protein showed a strong exo-β-d-glucosaminidase activity by TLC analysis. DTT (50 mM) had little effect on its homodimeric structure during SDS-PAGE. The enzyme was optimally active at 90°C (over 20 min) and pH 6. It had a half-life of 9 h at 90°C and is the most thermostable glucosaminidase described up to now. The activity was not inhibited by ethanol, 2-propanol, DMSO, PEG-400, denaturing agents SDS (5%, w/v), urea, guanidine hydrochloride (5 M) and Mg²⁺, Mn²⁺, Co²⁺, Ca²⁺, Sr²⁺, Ni²⁺ (at up to 10 mM).     

A cyanophycin synthetase from <Emphasis Type="Italic">Thermosynechococcus elongatus</Emphasis> BP-1 catalyzes primer-independent cyanophycin synthesis

Cyanophycin synthesis is catalyzed by cyanophycin synthetase (CphA). It was believed that CphA requires l-aspartic acid (Asp), l-arginine (Arg), ATP, Mg²⁺, and a primer (low-molecular mass cyanophycin) for cyanophycin synthesis and catalyzes the elongation of a low-molecular mass cyanophycin. Despite extensive studies of cyanophycin, the mechanism of primer supply is still unclear, and already-known CphAs were primer-dependent enzymes. In the present study, we found that recombinant CphA from Thermosynechococcus elongatus BP-1 (Tlr2170 protein) catalyzed in vitro cyanophycin synthesis in the absence of a primer. The Tlr2170 protein showed strict substrate specificity toward Asp and Arg. The optimum pH was 9.0, and Mg²⁺ or Mn²⁺ was essential for cyanophycin synthesis. KCl enhanced the cyanophycin synthesis activity of the Tlr2170 protein; in contrast, dithiothreitol did not. The Tlr2170 protein appeared to be a 400 ± 9 kDa homo-tetramer. The Tlr2170 protein showed thermal stability and retained its 80% activity after a 60-min incubation at 50°C. In addition, we examined cyanophycin synthesis at 30°C, 40°C, 50°C, and 60°C. SDS-PAGE analysis showed that the molecular mass of cyanophycin increased with increased reaction temperature.     

Expression in <Emphasis Type="Italic">Escherichia coli</Emphasis> of the recombinant <Emphasis Type="Italic">Vibrio anguillarum</Emphasis> metalloprotease and its purification and characterization

The full length empA gene encoding Vibrio anguillarum metalloprotease was amplified by PCR and fused to the expression vector pBAD24. The carboxy-terminal 6xHis-tagged recombinant metalloprotein (rEmpA) was expressed from plasmid pBAD-VAP6his in E. coli TOP10 and purified with affinity chromatography using a Ni-NTA column. SDS-PAGE analysis and Western blotting revealed a molecular mass of the mature rEmpA predicted to be 36 kDa. The optimal temperature and pH for the purified rEmpA were 37°C and 8.0, respectively. The enzyme was stable below 30°C and between pH 5.0 and 8.0, respectively. The results show that Ca²⁺, Na⁺ and Mg²⁺ had an activating effect on the enzyme while Zn²⁺ and Cu²⁺ acted as inhibitors of the enzyme. The purified rEmpA was characterized as a zinc metalloprotease as it was inhibited by zinc- and metal-specific inhibitors, such as 1,10-phenanthroline, EDTA and EGTA. The results indicate that some characteristics of EmpA from marine V. anguillarum had been modified after expression and processing in the engineered E. coli. The purified rEmpA showed degradation activity towards various kinds of proteins, indicating its potential role in pathogenesis.     

Production and properties of asparaginase from a new Erwinia sp

Asparaginase production by a mesophilic strain ofErwinia sp. was examined; the maximum of activity was found at 40°C and pH 8.5. Among the various carbon sources, mannitol was shown to be the best for production of activity. Inorganic nitrogen sources were better than the organic ones. The enzyme activity was not inhibited by 10 mmol/L metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Co²⁺, Ni²⁺, Zn²⁺); the activity was strongly inhibited by addition of EDTA.l-Arginine,dl-alanine,l-asparagine andl-glutamine stimulated thel-asparaginase production by 3.9, 1.7, 4.3 and 4.0 fold, respectively. The combination ofl-arginine,l-asparagine andl-glutamine synergistically stimulated the asparaginase up to 5.8 fold.     

A novel highly acidic β-mannanase from the acidophilic fungus Bispora sp. MEY-1: gene cloning and overexpression in Pichia pastoris

Using degenerate polymerase chain reaction (PCR) and thermal asymmetric interlaced PCR, a 1,347-bp full-length complementary DNA fragment encompassing the gene man5A, which encodes a 429-amino acid β-mannanase with a calculated mass of 46.8 kDa, was cloned from acidophilic Bispora sp. MEY-1. The deduced amino acid sequence (catalytic domain) displayed highest identity (54.1%) with the Emericella nidulans endo-β-1,4-d-mannanase, a member of the glycoside hydrolase family 5. Recombinant MAN5A was overexpressed in Pichia pastoris, and its activity in the culture medium reached 500 U ml⁻¹. The enzyme was acidophilic, with highest activity at pH 1.0–1.5, lower than any known mannanases, and optimal temperature for activity was 65°C. MAN5A had good pH adaptability, excellent thermal and pH stability, and high resistance to both pepsin and trypsin. The specific activity, K _m, and V _max for locust bean gum substrate was 3,373 U mg⁻¹, 1.56 mg ml⁻¹, and 6,587.6 μmol min⁻¹ mg⁻¹, respectively. The enzymatic activity was not significantly affected by ions such as Ca²⁺, Cr³⁺, Co²⁺, Zn²⁺, Na⁺, K⁺, and Mg²⁺ and enhanced by Ni²⁺, Fe³⁺, Mn²⁺ and Ag⁺. These favorable properties make MAN5A a potential candidate for use in various industrial applications.     

Molecular cloning and characterization of the novel acidic xylanase XYLD from Bispora sp. MEY-1 that is homologous to family 30 glycosyl hydrolases

We cloned and sequenced a xylanase gene named xylD from the acidophilic fungus Bispora sp. MEY-1 and expressed the gene in Pichia pastoris. The 1,422-bp full-length complementary DNA fragment encoded a 457-amino acid xylanase with a calculated molecular mass of 49.8 kDa. The mature protein of XYLD showed high sequence similarity to both glycosyl hydrolase (GH) families 5 and 30 but was more homologous to members of GH 30 based on phylogenetic analysis. XYLD shared the highest identity (49.9%) with a putative endo-1,6-β-d-glucanase from Talaromyces stipitatus and exhibited 21.1% identity and 34.3% similarity to the well-characterized GH family 5 xylanase from Erwinia chrysanthemi. Purified recombinant XYLD showed maximal activity at pH 3.0 and 60 °C, maintained more than 60% of maximal activity when assayed at pH 1.5–4.0, and had good thermal stability at 60 °C and remained stable at pH 1.0–6.0. The enzyme activity was enhanced in the presence of Ni²⁺ and β-mercaptoethanol and inhibited by some metal irons (Hg²⁺, Cu²⁺, Pb²⁺, Mn²⁺, Li⁺, and Fe³⁺) and sodium dodecyl sulfate. The specific activity of XYLD for beechwood xylan, birchwood xylan, 4-O-methyl-d-glucuronoxylan, and oat spelt xylan was 2,463, 2,144, 2,020, and 1,429 U mg⁻¹, respectively. The apparent K _m and V _max values for beechwood xylan were 5.6 mg ml⁻¹ and 3,622 μmol min⁻¹ mg⁻¹, respectively. The hydrolysis products of different xylans were mainly xylose and xylobiose.     

Genetic variation of an acid phosphatase (Acp-2) in the laboratory rat: Possible homology with mouse AP-1 and human ACP2

A genetic locus controlling the electrophoretic mobility of an acid phosphatase in the rat (Rattus norvegicus) is described. The locus, designed Acp-2, is not expressed in erythrocytes but is expressed in all other tissues studied. The product of Acp-2 hydrolyzes a wide variety of phosphate monoesters and is inhibited by l(+)-tartaric acid. Inbred rat strains have fixed either allele Acp-2^a or allele Acp-2^b. Codominant expression is observed in the respective F₁ hybrids. Backcross progenies revealed the expected 1:1 segregation ratio. Possible loose linkage was found between the Acp-2 and the Pep-3 gene loci at a recombination frequency of 0.36±0.06.Supported by the Deutsche Forschungsgemeinschaft (Grant Be 352/15) and by a grant from the Alexander-von-Humboldt-Stiftung (VB2-FLF).     

Purification and characterization of a novel l-2-amino-Δ2-thiazoline-4-carboxylic acid hydrolase from Pseudomonas sp. strain ON-4a expressed in E. coli

l-2-Amino-Δ²-thiazoline-4-carboxylic acid hydrolase (ATC hydrolase) was purified and characterized from the crude extract of Escherichia coli, in which the gene for ATC hydrolase of Pseudomonas sp. strain ON-4a was expressed. The results of SDS–polyacrylamide gel electrophoresis and gel filtration on Sephacryl S-200 suggested that the ATC hydrolase was a tetrameric enzyme consisted of identical 25-kDa subunits. The optimum pH and temperature of the enzyme activity were pH 7.0 and 30–35°C, respectively. The enzyme did not require divalent cations for the expression of the activity, and Cu²⁺ and Mn²⁺ ions strongly inhibited the enzyme activity. An inhibition experiment by diethylpyrocarbonic acid, 2-hydroxy-5-nitrobenzyl bromide, and N-bromosuccinimide suggested that tryptophan, cysteine, or/and histidine residues may be involved in the catalytic site of this enzyme. The enzyme was strictly specific for the l-form of d,l-ATC and exhibited high activity for the hydrolysis of l-ATC with the values of K _m (0.35 mM) and V _max (69.0 U/mg protein). This enzyme could not cleave the ring structure of derivatives of thiazole, thiazoline, and thiazolidine tested, except for d,l- and l-ATC. These results show that the ATC hydrolase is a novel enzyme cleaving the carbon–sulfur bond in a ring structure of l-ATC to produce N-carbamoyl-l-cysteine.     

A lectin with antifungal and mitogenic activities from red cluster pepper (<Emphasis Type="Italic">Capsicum frutescens</Emphasis>) seeds

A monomeric mannose/glucose-binding lectin, with a molecular mass of 29.5 kDa and an N-terminal sequence GQRELKL showing resemblance to that of the lectin-like oxidized low-density lipoprotein receptor from the rabbit, has been isolated from the seeds of red cluster pepper Capsium frutescens L. var. fasciculatum. The protocol involved anion exchange chromatography on diethylamino ethanol-cellulose and Q-Sepharose and fast protein liquid chromatography on Mono Q. Its hemagglutinating activity toward rabbit erythrocytes was inhibited by d-mannose and glucose, specifically. The activity was stable from 0 to 40°C, reached a maximum at pH 7 and 8, and was potentiated by Ca²⁺ and Mn²⁺ ions. The lectin showed strong mitogenic activity toward spleen cells isolated from BALB/c mice. The mitogenic activity, which reached a peak at a lectin concentration of 0.27 μM, was inhibited specifically by d(+)-mannose. The lectin was capable of inhibiting the germination of Aspergillus flavus and Fusarium moniliforme spores and hyphal growth in the two fungi.     

Cloning,purification, and characterization of β-galactosidase from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> DSM 13

The gene encoding homodimeric β-galactosidase (lacA) from Bacillus licheniformis DSM 13 was cloned and overexpressed in Escherichia coli, and the resulting recombinant enzyme was characterized in detail. The optimum temperature and pH of the enzyme, for both o-nitrophenyl-β-d-galactoside (oNPG) and lactose hydrolysis, were 50°C and 6.5, respectively. The recombinant enzyme is stable in the range of pH 5 to 9 at 37°C and over a wide range of temperatures (4–42°C) at pH 6.5 for up to 1 month. The K _m values of LacA for lactose and oNPG are 169 and 13.7 mM, respectively, and it is strongly inhibited by the hydrolysis products, i.e., glucose and galactose. The monovalent ions Na⁺ and K⁺ in the concentration range of 1–100 mM as well as the divalent metal cations Mg²⁺, Mn²⁺, and Ca²⁺ at a concentration of 1 mM slightly activate enzyme activity. This enzyme can be beneficial for application in lactose hydrolysis especially at elevated temperatures due to its pronounced temperature stability; however, the transgalactosylation potential of this enzyme for the production of galacto-oligosaccharides (GOS) from lactose was low, with only 12% GOS (w/w) of total sugars obtained when the initial lactose concentration was 200 g/L.     

Cloning,expression, and characterization of Aureobasidium melanogenum lipase in Pichia pastoris

cDNA of Aureobasidium melanogenum lipase comprises 1254 bp encoding 417 amino acids, whereas genomic DNA of lipase comprises 1311 bp with one intron (57 bp). The lipase gene contains a putative signal peptide encoding 26 amino acids. The A. melanogenum lipase gene was successfully expressed in Pichia pastoris. Recombinant lipase in an inducible expression system showed the highest lipase activity of 3.8 U/mL after six days of 2% v/v methanol induction. The molecular mass of purified recombinant lipase was estimated as 39 kDa using SDS-PAGE. Optimal lipase activity was observed at 35–37 °C and pH 7.0 using p-nitrophenyl laurate as the substrate. Lipase activity was enhanced by Mg²⁺, Mn²⁺, Li⁺, Ca²⁺, Ni²⁺, CHAPS, DTT, and EDTA and inhibited by Hg²⁺, Ag⁺, SDS, Tween 20, and Triton X-100. The addition of 10% v/v acetone, DMSO, p-xylene, and octanol increased lipase activity, whereas that of propanol and butanol strongly inhibited it.     

Purification and Characterization of an Esterase from <Emphasis Type="Italic">Acinetobacter lwoffii</Emphasis> I6C-1

EstA was purified from the supernatant by A. lwoffii 16C-1. Its molecular mass was determined to be 45 kDa, and the optimal activity occurred when the pH level was 8.0 at a temperature of 37°C. The activation energies for the hydrolysis of p-nitrophenyl butyrate was determined to be 11.25 kcal/mol in the temperature range of 10–37°C. The enzyme was unstable at temperatures higher than 50°C. The Michaelis constant (K _m ) and V _max for p-nitrophenyl butyrate were 11 μM and 131.6 μM min⁻¹ mg of protein-1, respectively. The enzyme was strongly inhibited by Hg²⁻, Ca²⁺, Mg²⁺, Fe²⁺, Cu²⁺, Zn²⁺, Mn²⁺, Co²⁺, ethylemediaminetetraacetic acid (EDTA), phenylmethylsulfonyl fluoride (PMSF), and diisopropyl fluorophosphate (DFP). Received: 20 August 2001 / Accepted: 20 September 2001     

Thermotoga maritima AglA, an extremely thermostable NAD+-, Mn2+-, and thiol-dependent α-glucosidase

The gene for the α-glucosidase AglA of the hyperthermophilic bacterium Thermotoga maritima MSB8, which was identified by phenotypic screening of a T. maritima gene library, is located within a cluster of genes involved in the hydrolysis of starch and maltodextrins and the uptake of maltooligosaccharides. According to its primary structure as deduced from the nucleotide sequence of the gene, AglA belongs to family 4 of glycosyl hy-drolases. The enzyme was recombinantly expressed in Escherichia coli, purified, and characterized. The T. maritimaα-glucosidase has the unusual property of requiring NAD⁺ and Mn²⁺ for activity. Co²⁺ and Ni²⁺ also activated AglA, albeit less efficiently than Mn²⁺. T. maritima AglA represents the first example of a maltodextrin-degrading α-glucosidase with NAD⁺ and Mn²⁺ requirement. In addition, AglA activity depended on reducing conditions. This third requirement was met by the addition of dithiothreitol (DTT) or β-mercaptoethanol to the assay. Using gel permeation chromatography, T. maritima AglA behaved as a dimer (two identical 55-kDa subunits), irrespective of metal depletion or metal addition, and irrespective of the presence or absence of NAD⁺ or DTT. The enzyme hydrolyzes maltose and other small maltooligosaccharides but is inactive against the polymeric substrate starch. AglA is not specific with respect to the configuration at the C-4 position of its substrates because glycosidic derivatives of d-galactose are also hydrolyzed. In the presence of all cofactors, maximum activity was recorded at pH 7.5 and 90°C (4-min assay). AglA is the most thermoactive and the most thermostable member of glycosyl hydrolase family 4. When incubated at 50°C and 70°C, the recombinant enzyme suffered partial inactivation during the first hours of incubation, but thereafter the residual activity did not drop below about 50% and 20% of the initial value, respectively, within a period of 48 h. Received: October 6, 1999 / Accepted: February 9, 2000     

Characterization of a recombinant thermostable xylanase from deep-sea thermophilic Geobacillus sp. MT-1 in East Pacific

A novel xylanase-producing thermophilic strain MT-1 was isolated from a deep-sea hydrothermal field in east Pacific. A xylanase gene encoding 331 amino-acid peptide from this isolate was cloned and expressed in Escherichia coli. The recombinant xylanase exhibited maximum activity at 70°C and had an optimum pH of 7.0. It was active up to 90°C and showed activity over a wide pH ranging from 5.5 to 10.0. The crude xylanase presented similar properties in temperature and pH to those of the recombinant xylanase. The recombinant xylanase was stable in 1 mM of enzyme inhibitors (PMSF, EDTA, 2-ME or DTT) and in 0.1% detergents (Tween 20, Chaps or Triton X-100), whereas, it was strongly inhibited by sodium dodecyl sulfate (SDS) (1 mM). In addition, its catalytic function was stable in the presence of Li⁺, Na⁺ or K⁺. However, it was strongly inhibited by Ni²⁺, Mn²⁺, Co²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Al³⁺ (1 or 0.1 mM). The K _m and V _max of the recombinant xylanase for oat spelt xylan were calculated to be 1.579 mg/ml and 289 μmol/(min • mg), respectively. Our study, therefore, presented a rapid overexpression and purification of xylanase from deep-sea thermophile aimed at improving the enzyme yield for industrial applications and scientific research.     

Active site analysis of <Emphasis Type="Italic">cis</Emphasis>-epoxysuccinate hydrolase from <Emphasis Type="Italic">Nocardia tartaricans</Emphasis> using homology modeling and site-directed mutagenesis

Cis-epoxysuccinate hydrolase (CESH, EC 3.3.2.3) from Nocardia tartaricans is known to catalyze the opening of an epoxide ring of cis-epoxysuccinate (CES), thereby converting it to corresponding vicinal diol, l(+)-tartaric acid. An attempt has been made to build a 3D homology model of CESH to investigate the structure–function relationship, and also to understand the mechanism of the enzymatic reaction. Using a combination of molecular-docking simulation and multiple sequence alignment, a set of putative residues that are involved in the CESH catalysis has been identified. Functional roles of these putative active-site residues were further evaluated by site-directed mutagenesis. Interestingly, the mutants D18A, D18E, Q20E, T22A, R55E, N134D, K164A, H190A, H190N, H190Q, D193A, and D193E resulted in complete loss of activity, whereas the mutants Y58F, T133A, S189A, and Y192D retained partial enzyme activity. Furthermore, the active-site residues responsible for the opening of CES were analyzed, and the mechanism underlying the catalytic triad involved in l(+)-tartaric acid biosynthesis was proposed.