Electrophoretic analysis of the multiple forms of dextransucrase from Leuconostoc mesenteroides

Multiple forms of the extracellular dextransucrase [EC 2.4.1.5] from Leuconostoc mesenteroides NRRL B-512F strain were characterized by polyacrylamide gel electrophoresis. Based on the Rm (Relative mobility) values, a newly devised simple plot of log (Rm X 10/(1-Rm)) vs. degree of association of the enzyme showed a good correlation with the results obtained by the Hedrick-Smith method. Both results indicated that the B-512F dextransucrase aggregates were a mixture of two types of forms, i.e., oligomers of a 65 kDa protomer and their charge isomers. Boiling and treatment of the enzyme at pH 10.5 suggested that enzyme aggregates contained dextran or its fragments bound to the enzyme and the enzyme-dextran complex showed the charge isomerism. Since the highly aggregated forms showed higher activity for dextran synthesis than the dissociated forms, the endogenous dextran may serve as a source of primer and may stabilize the enzyme molecule. Besides allosteric regulation of the activity, the occurrence of oligomeric forms of the enzyme may play an important role in the control of dextran synthesis in vivo.     

A facile purification of Leuconostoc mesenteroides B-512FM dextransucrase

Leuconostoc mesenteroides NRRL B-512F has been mutated by treatment with N-nitrosoguanidine. The resulting mutant (designated as B-512FM) produces 300 times as much enzyme as the parent strain. B-512FM dextransucrase was treated extensively with Sigma crude dextranase, followed by column chromatography on Bio-Gel A-5m. The purified dextransucrase had a specific activity of 84 IU/mg, a 100-fold purification with 42% yield, and was shown by SDS-PAGE to have a single protein of molecular weight of 158,000 with dextransucrase activity. The procedure has been used to produce purified enzyme for sequencing. The molecular weight of 158,000 agrees with that calculated from its amino acid sequence.     

Gene encoding a dextransucrase-like protein in Leuconostoc mesenteroides NRRL B-512F

A gene, dsrT, encoding a dextransucrase-like protein was isolated from the genomic DNA libraries of Leuconostoc mesenteroides NRRL B-512F dextransucrase-like gene. The gene was similar to the intact open reading frames of the dextransucrase gene dsrS of L. mesenteroides NRRL B-512F, dextransucrase genes of strain NRRL B-1299 and streptococcal glucosyltransferase genes, but was truncated after the catalytic domain, apparently by the deletion of five nucleotides. dsrT mRNA was produced in this strain L. mesenteroides when cells were grown in a sucrose medum, but at a level of 20% of that of dsrS mRNA. The molecular weight of the dsrT gene product was 150,000 by SDS-PAGE. The product did not synthesize dextran, but had weak sucrose cleaving activity. The insertion of five nucleotides at the putative deletion point in dsrT resulted in an enzyme with a molecular weight of 210,000 and with dextransucrase activity.     

Kinetic modeling of oligosaccharide synthesis catalyzed by leuconostoc mesenteroides NRRL B-1299 dextransucrase

The kinetic behavior of soluble and insoluble forms of dextransucrase from Leuconostoc mesenteroides NRRL B-1299 was investigated with sucrose as substrate and maltose as acceptor. To study the parameters involved, a kinetic model was applied that was previously developed for L. mesenteroides NRRL B-512F dextransucrase. There are significant correlations between the parameters of the soluble form of B-1299 dextransucrase and those calculated for the B-512F enzyme; that is, their properties are comparable and differ from those of the insoluble form of B-1299 dextransucrase. Whereas the calculated parameters for high maltose concentrations describe the kinetic behavior very well, the time curves for low maltose concentrations were not described correctly. Therefore, the parameters were calculated separately for the two ranges. Copyright 1999 John Wiley & Sons, Inc.     

Cloning and expression of levansucrase from Leuconostoc mesenteroides B-512 FMC in Escherichia coli

Leuconostoc mesenteroides B-512 FMC produces dextran and levan using sucrose. Because of the industrial importance of dextrans and oligosaccharides synthesized by dextransucrase (one of glycansucrases from L. mesenteroides), much is known about the dextransucrase, including expression and regulation of gene. However, no detailed report about levansucrase, another industrially important glycansucrase from L. mesenteroides, and its gene was available. In this paper, we report the first-time isolation and molecular characterization of a L. mesenteroides levansucrase gene (m1ft). The gene m1ft is composed of 1272-bp nucleotides and codes for a protein of 424 amino acid residues with calculated molecular mass of 47.1 kDa. The purified protein was estimated to be about 51.7 kDa including a His-tag based on SDS-PAGE. It showed an activity band at 103 kDa on a non-denaturing SDS-PAGE, indicating a dimeric form of the active M1FT. M1FT levan structure was confirmed by NMR and dot blot analysis with an anti-levan-antibody. M1FT converted 150 mM sucrose to levan (18%), 1-kestose (17%), nystose (11%) and 1,1,1-kestopentaose (7%) with the liberation of glucose. The M1FT enzyme produced erlose [O-alpha-D-glucopyranosyl-(1-->4)-O-alpha-D-glucopyranosyl-(1-->2)-beta-D-fructofuranoside] as an acceptor product with maltose. The optimum temperature and pH of this enzyme for levan formation were 30 degrees C and pH 6.2, respectively. M1FT levansucrase activity was completely abolished by 1 mM Hg2+ or Ag2+. The Km and Vmax values for levansucrase were calculated to be 26.6 mM and 126.6 micromol min-1 mg-1.     

Development of constitutive dextransucrase hyper-producing mutants of Leuconostoc mesenteroides using the synchrotron radiation in the 70-1000 eV region

After irradiation with photons in the energy range of 70-1000 eV using the synchrotron radiation facility at Pohang, Korea, dextransucrase constitutive and hyper-producing mutants from Leuconostoc mesenteroides were isolated. The mutant (B-512FMCM) produced 13 times higher activity and showed complete constitutivity for dextransucrase production. It synthesized the same dextran as B-512FMC. The dextransucrase of the mutant transferred glucose from dextran to maltose. This novel method is a new technique for the development of industrial microorganisms.     

Cloning of a dextransucrase gene (fmcmds) from a constitutive dextransucrase hyper-producing Leuconostoc mesenteroides B-512FMCM developed using VUV

Dextransucrase (FMCMDS) from Leuconostoc mesenteroides B-512FMCM, a dextransucrase constitutive and hyper-producing strain, catalyzes the synthesis of dextran from sucrose. The coding region for fmcmds was isolated and sequenced. It consisted of an open reading frame (ORF) of 4699 bp, coding for a 1527 amino acid protein with a molecular mass of 170 kDa. However, it showed a dextransucrase activity band at 180 kDa in SDS-PAGE. Only one nucleotide changed in the promoter site and two amino acid residues were changed in the structural gene from that of the parent L. mesenteroides NRRL B-512F dsrS; an inducible dextransucrase gene of low productivity.     

Leuconostoc mesenteroides glucansucrase synthesis of flavonoid glucosides by acceptor reactions in aqueous-organic solvents

The enzymatic glucosylation of luteolin was attempted using two glucansucrases: the dextransucrase from Leuconostoc mesenteroides NRRL B-512F and the alternansucrase from L. mesenteroides NRRL B-23192. Reactions were carried out in aqueous-organic solvents to improve luteolin solubility. A molar conversion of 44% was achieved after 24h of reaction catalysed by dextransucrase from L. mesenteroides NRRL B-512F in a mixture of acetate buffer (70%)/bis(2-methoxyethyl) ether (30%). Two products were characterised by nuclear magnetic resonance (NMR) spectroscopy: luteolin-3'-O-alpha-d-glucopyranoside and luteolin-4'-O-alpha-d-glucopyranoside. In the presence of alternansucrase from L. mesenteroides NRRL B-23192, three additional products were obtained with a luteolin conversion of 8%. Both enzymes were also able to glucosylate quercetin and myricetin with conversion of 4% and 49%, respectively.     

Identification, effective purification and functional characterization of dextransucrase from Leuconostoc mesenteroides NRRL B-640

The extracellular dextransucrase from Leuconostoc mesenteroides NRRL B-640 was purified using polyethylene glycol fractionation (PEG) and gel-filtration. The cell free extract was subjected to fractionation by PEG-200, 400 and 1500. The 10% (w/v) PEG-1500 gave dextransucrase with maximum specific activity of 23 with 40 fold purification in a single step. The purified enzyme showed multiple molecular forms on SDS-PAGE, however the same sample showed a single band on non-denaturing native-PAGE. The purified dextransucrase fractions obtained from PEG-1500, confirmed the presence of dextran, when run on SDS-PAGE under non-denaturing gels for in situ activity detection by Periodic Acid Schiff's staining. The activity bands corresponded to the native and active form of the purified dextransucrase of approximately, 180kDa molecular size, that appeared on the denaturing gels stained with Coomassie Brilliant Blue. No bands appeared after staining the activity of dextransucrase on non denaturing SDS-PAGE gels with raffinose, which excluded the presence of fructosyltransferases. Further purification of 10% PEG-1500 purified dextransucrase by gel-filtration gave dextransucrase with specific activity of 35 with 61 fold purification.     

Proteolytic modification of <Emphasis Type="Italic">Leuconostoc mesenteroides</Emphasis> B-512F dextransucrase

Multiple active lower molecular weight forms from Leuconostoc mesenteroides B512F dextransucrase have been reported. It has been suggested that they arise from proteolytic processing of a 170 kDa precursor. In this work, the simultaneous production of proteases and dextransucrase was studied in order to elucidate the dextransucrase proteolytic processing. The effect of the nitrogen source on protease and dextransucrase production was studied. Protease activity reaches a maximum early in the logarithmic phase of dextransucrase synthesis using the basal culture medium but the nitrogen source plays an important effect on growth: the highest protease concentration was obtained when ammonium sulfate, casaminoacids or tryptone were used. Two active forms of 155 and 129 kDa were systematically obtained from dextransucrase precursor by proteolysis. The amino termini of these forms were sequenced and the cleavage site deduced. Both forms of the enzyme obtained had the same cleavage site in the amino terminal region (F209–Y210). From dextransucrase analysis, various putative cleavage sites with the same sequence were found in the variable region and in the glucan binding domain. Although no structural differences were found in dextrans synthesized with both the precursor and the proteolyzed 155 kDa form under the same reaction conditions, their rheological behaviour was modified, with dextran of a lower viscosity yielded by the smaller form.Martha Argüello-Morales and Mónica Sánchez-González equally contributed to this work.     

Identification of a single and non-essential cysteine residue in dextransucrase of Leuconostoc mesenteroides NRRL B-512F

Amino acid analysis of purified dextransucrase (sucrose: 1,6-alpha-D-glucan 6-alpha-D-glucosyltransferase EC 2.4.1.5) from Leuconostoc mesenteroides NRRL B-512F was carried out. The enzyme is virtually devoid of cysteine residue there being only one cysteine residue in the whole enzyme molecule comprising over 1500 amino acid residues. The enzyme is rich in acidic amino acid residues. The number of amino acid residues was calculated based on the molecular weight of 188,000 (Goyal and Katiyar 1994). Amino sugars were not found, implying that the enzyme is not a glycoprotein. It has been shown earlier that the cysteine residue in dextransucrase is not essential for enzyme activity (Goyal and Katiyar 1998). The presence of only one cysteine residue per enzyme molecule illustrates that its tertiary structure is solely dependent on other types of non-covalent interactions such as hydrogen bonding, ionic and nonpolar hydrophobic interactions.     

Understanding the polymerization mechanism of glycoside-hydrolase family 70 glucansucrases

Glucan formation catalyzed by two GH-family 70 enzymes, Leuconostoc mesenteroides NRRL B-512F dextransucrase and L. mesenteroides NRRL B-1355 alternansucrase, was investigated by combining biochemical and kinetic characterization of the recombinant enzymes and their respective products. Using HPAEC analysis, we showed that two molecules act as initiator of polymerization: sucrose itself and glucose produced by hydrolysis, the latter being preferred when produced in sufficient amounts. Then, elongation occurs by transfer of the glucosyl residue coming from sucrose to the non-reducing end of initially formed products. Dextransucrase preferentially produces an isomaltooligosaccharide series, whose concentration is always low because of the high ability of these products to be elongated and form high molecular weight dextran. Compared with dextransucrase, alternansucrase has a broader specificity. It produces a myriad of oligosaccharides with various alpha-1,3 and/or alpha-1,6 links in early reaction stages. Only some of them are further elongated. Overall alternan polymer is smaller in size than dextran. In dextransucrase, the A repeats often found in C-terminal domain of GH family 70 were found to play a major role in efficient dextran elongation. Their truncation result in an enzyme much less efficient to catalyze high molecular weight polymer formation. It is thus proposed that, in dextransucrase, the A repeats define anchoring zones for the growing chains, favoring their elongation. Based on these results, a semi-processive mechanism involving only one active site and an elongation by the non-reducing end is proposed for the GH-family 70 glucansucrases.     

Cloning, expression and characterization of an extracellular enolase from Leuconostoc mesenteroides

Enolase on the surface of streptococci putatively facilitates pathogenic invasion of the host organisms. The related Leuconostoc mesenteroides 512FMCM is nonpathogenic, but it too has an extracellular enolase. Purified isolates of extracellular dextransucrase from cultures of L. mesenteroides contain minute amounts of enolase, which separate as small crystals. Expression of L. mesenteroides enolase in Escherichia coli provides a protein (calculated subunit mass of 47 546 Da) catalyzing the conversion of 2-phsopho-D-glycerate to phosphoenolpyruvate. The pH optimum is 6.8, with Km and kcat values of 2.61 mM and 27.5 s(-1), respectively. At phosphate concentrations of 1 mM and below, fluoride is a noncompetitive inhibitor with respect to 2-phospho-D-glycerate, but in the presence of 20 mM phosphate, fluoride becomes a competitive inhibitor. Recombinant enolase significantly inhibits the activity of purified dextransucrase, and does not bind human plasminogen. Results here suggest that in some organisms enolase may participate in protein interactions that have no direct relevance to pathogenic invasion.     

Characterization of the multiple forms and main component of dextransucrase from Leuconostoc mesenteroides NRRL B-512F

Multiple forms of dextransucrase (sucrose:1.6-alpha-D-glucan 6-alpha-D-glucosyltransferae EC 2.4.1.5) from Leuconostoc mesenteroides NRRL B-512F strain were shown by gel filtraton and electrophoretic analyses. Two components of enzyme, having different affinities for dextran gel, were separated by a column of Sephadex G-100. The major component voided from the Sephadex column was treated with dextranase and purified to an electrophoretically homogeneous state. The ]urified enzyme had a molecular weight of 64 000-65 000, pI value of 4.1, and 17% of carbohydrate in a molecule. EDTA showed a characteristic inhibition on the enzyme while stimulative effects were observed by the addition of exogenous dextran to the incubation mixture. The enzyme activity was stimulated by various dextrans and its Km value was decreased with increasing concentration of dextran. The purified enzyme showed no affinity for a Sephadex G-100 gel, and readily aggregated after the preservation at 4 degrees C in a concentrated solution.     

Novel oligosaccharides synthesized from sucrose donor and cellobiose acceptor by alternansucrase

Cellobiose was tested as acceptor in the reaction catalyzed by alternansucrase (EC 2.4.1.140) from Leuconostoc mesenteroides NRRL B-23192. The oligosaccharides synthesized were compared to those obtained with dextransucrase from L. mesenteroides NRRL B-512F. With alternansucrase and dextransucrase, overall oligosaccharide synthesis yield reached 30 and 14%, respectively, showing that alternansucrase is more efficient than dextransucrase for cellobiose glucosylation. Interestingly, alternansucrase produced a series of oligosaccharides from cellobiose. Their structure was determined by mass spectrometry and [13C-1H] NMR spectroscopy. Two trisaccharides are first produced: alpha-D-glucopyranosyl-(1-->2)-[beta-D-glucopyranosyl-(1-->4)]-D-glucopyranose (compound A) and alpha-D-glucopyranosyl-(1-->6)-beta-D-glucopyranosyl-(1-->4)-D-glucopyranose (compound B). Then, compound B can in turn be glucosylated leading to the synthesis of a tetrasaccharide with an additional alpha-(1-->6) linkage at the non-reducing end (compound D). The presence of the alpha-(1-->3) linkage occurred only in the pentasaccharides (compounds C1 and C2) formed from tetrasaccharide D. Compounds B, C1, C2 and D were never described before. They were produced efficiently only by alternansucrase. Their presence emphasizes the difference existing in the acceptor reaction selectivity of the various glucansucrases.     

Stability Study of Crude Dextransucrase from <Emphasis Type="Italic">Leuconostoc citreum</Emphasis> NRRL B-742

In the present work, the stability of crude dextransucrase from Leuconostoc citreum B-742 was evaluated in synthetic and in cashew apple juice culture broth. Optimum stability conditions for dextransucrase from L. citreum B-742 were different from the reported for its parental industrial strain enzyme (L. mesenteroides B-512F). Crude dextransucrase, from L. citreum B-742, produced using cashew apple juice as substrate, presented higher stability than the crude enzyme produced using synthetic culture medium, showing the same behavior previously reported for dextransucrase from L. mesenteroides B-512F. The crude enzyme presented good stability in cashew apple juice for 48 h at 25°C and pH 6.5.     

Search for a dextransucrase minimal motif involved in dextran binding

Fourteen truncated forms of Leuconostoc mesenteroides NRRL B512-F dextransucrase, involving N-, C- or N- plus C-terminal domain truncations were tested for their ability to bind dextrans. The shortest fragment (14kDa molecular weight) that still exhibited a strong interaction with dextran was localized between amino acids N1397 and A1527 of the C-terminal domain (GBD-7) and consists of six YG repeats. With a dissociation constant K(d) of 2.8x10(-9)M, this motif shows a very high affinity for isomaltohexaose and longer dextrans, supporting the proposed role of GBD in polymer formation. The potential application of GBD-7 as an affinity tag onto cheap resins like Sephacryl S300HR for rapid purification was evaluated and is discussed.     

Immobilization of dextransucrase from Leuconostoc mesenteroides NRRL B-512F on Eupergit C supports

Dextransucrase from Leuconostoc mesenteroides B-512F was immobilized on epoxy-activated acrylic polymers with different textural properties (Eupergit C and Eupergit C 250L). Prior to immobilization, dextransucrase was treated with dextranase to remove the dextran layer covering the enzyme surface, thus increasing the accessibility of its reactive groups to the epoxide centers of the support. Elimination of 99% of the initial carbohydrate content was determined by the anthrone method. To prevent enzyme inactivation, the immobilization was carried out at pH 5.4, at which the coupling to the support took place through the carboxylic groups of the enzyme. The effects of the amount (mg) of dextransucrase added per gram of support (from 0.2:1 to 30:1), temperature and contact time were studied. Maximum activity recovery of 22% was achieved using Eupergit C 250L. Using this macroporous support, the maximum specific activity (710 U/g biocatalyst) was significantly higher than that obtained with the less porous Eupergit C (226 U/g biocatalyst). The dextransucrase immobilized on Eupergit C 250L showed similar optimal temperature (30 degrees C) and pH (5-6) compared with the native enzyme. In contrast, a notable stabilization effect at 30 degrees C was observed as a consequence of immobilization. After a fast partial inactivation, the dextransucrase immobilized on Eupergit C 250L maintained more than 40% of the initial activity over the following 2 days. The features of this immobilized system are very attractive for its application in batch and fixed-bed bioreactors.     

Monitoring of Leuconostoc population during sauerkraut fermentation by quantitative real-time polymerase chain reaction

A real-time PCR assay method was established to monitor Leuconostoc spp. populations via specific amplification of the dextransucrase gene. Quantification of L. mesenteroides B-512F using both genomic DNA and cell suspensions yielded a log-linear correlation spanning approximately 5 log units. By using this method, monitoring changes of Leuconostoc spp. during sauerkraut fermentation was successfully accomplished with accuracy after inoculation of starter and sugars (sucrose and maltose).