Trans-activation of an artificial dTam3 transposable element in transgenic tobacco plants

In Antirrhinum majus only autonomous Tam3 transposons have been characterized. We investigated whether an artificial dTam3 element, with a deletion in the presumptive transposase coding region, can be trans-activated in tobacco by an activator Tam3 element, which was immobilized by the deletion of one inverted repeat. A phenotypic assay based on restored hygromycin resistance demonstrates that a dTam3 element harbouring a bacterial plasmid can be trans-activated with a low frequency. Molecular analysis confirms that the dTam3 element has been excised from the HPTII marker gene. Reintegration of the dTam3 element into the tobacco genome is detected only in one out of six hygromycin-resistant plants analysed. PCR analysis of empty donor sites shows that excision of the dTam3 element in tobacco results in rearrangements (deletions and additions), that have been shown to be characteristic of Tam3 excision in the original host Antirrhinum majus. This trans-activation assay allowed us to establish that, in contrast to what has been detected in Antirrhinum majus, a periodical temperature shift down to 15°C does not enhance dTam3 transposition in regenerating tobacco calli.     

A comparative study of Tam3 and Ac transposition in transgenic tobacco and petunia plants

Transposition of the Anthirrinum majus Tam3 element and the Zea mays Ac element has been monitored in petunia and tobacco plants. Plant vectors were constructed with the transposable elements cloned into the leader sequence of a marker gene. Agrobacterium tumefaciens-mediated leaf disc transformation was used to introduce the transposable element constructs into plant cells. In transgenic plants, excision of the transposable element restores gene expression and results in a clearly distinguishable phenotype. Based on restored expression of the hygromycin phosphotransferase II (HPTII) gene, we established that Tam3 excises in 30% of the transformed petunia plants and in 60% of the transformed tobacco plants. Ac excises from the HPTII gene with comparable frequencies (30%) in both plant species. When the -glucuronidase (GUS) gene was used to detect transposition of Tam3, a significantly lower excision frequency (13%) was found in both plant species. It could be shown that deletion of parts of the transposable elements Tam3 and Ac, removing either one of the terminal inverted repeats (TIR) or part of the presumptive transposase coding region, abolished the excision from the marker genes. This demonstrates that excision of the transposable element Tam3 in heterologous plant species, as documented for the autonomous element Ac, also depends on both properties. Southern blot hybridization shows the expected excision pattern and the reintegration of Tam3 and Ac elements into the genome of tobacco plants.     

Evidence forTAM3 activity in transgenicArabidopsis thaliana

Summary TheAntirrhinum majus Tam3 element was introduced intoArabidopsis thaliana protoplasts and plants in order to assess the influence of anin vitro culture phase such as protoplasts and callus culture on the mobility of this transposable element in this plant species. The constructs used contained theTam3 element inserted in between the CaMV 35S promoter and thegus- orhpt-coding region, allowing a direct selection of excision candidates. From the different approaches used, only a long-term callus culture allowed us to detectTam3 activity. NoTam3 activity could be detected in protoplasts or protoplast-derived microcolonies. Our data are compared with those previously reported forTam3 in tobacco and petunia.     

Phenotypic effects of short-range and aberrant transposition in Antirrhinum majus

We describe two novel ways in which changes in gene expression in Antirrhinum majus may arise as a consequence of the Tam3 transposition mechanism. One involves excision of Tam3 from the nivea gene promoter and insertion of two new Tam3 copies 3.4 kb and 2.1 kb away, on either side of the excision site. One of the new insertions is in the nivea coding region and completely blocks production of an active gene product. This allele probably arose by a symmetrical double transposition, following chromosome replication. The second case involves a small deletion at one end of Tam3 in the pallida gene, flanked by a sequence typical of a Tam3 excision footprint. This suggests that the end of Tam3 was cleaved at an early step in an attempted transposition and re-ligated back to its original flanking sequence. The alteration restores some expression to the pallida gene, suggesting that the ends of the intact Tam3 element contain components which can actively inhibit gene expression. The implications of these findings for the mechanism of Tam3 transposition and for the effects of Tam3 on host gene expression are discussed.     

Differential repair of excision gaps generated by transposable elements of the ‘Ac family’

Studies on transposable elements of the Ac family have led to different models for excision gap repair in either plants or Drosophila. Excision products generated by the plant transposable elements Ac and Tam3 imply a more or less straightforward ligation of broken ends; excision products of the Drosophila P element indicate the involvement of ‘double-strand break’ (DSB) repair. Recent findings that excision products of Ac and Tam3 can also contain traces of the element ends indicate, however, that DSB repair might be an alternative repair mechanism in plants. A functional DSB repair mechanism in plants can also be deduced from the observed rapid increases of Ac copy number during plant development and from the involvement of Ac in the generation of internal Ac deletions. On the other hand, alternative repair mechanisms may also be functional in Drosophila, because some of the ‘footprints’ generated upon P excision can be explained by a mechanism that has been postulated for excision gap repair in plants. It is concluded that plants and Drosophila can use similar repair mechanisms, but that the predominance of a certain repair mechanism is determined by the host.     

Comparison of genetic behaviour of the transposable element Tam3 at two unlinked pigment loci in Antirrhinum majus

Summary In Antirrhinum majus the transposable element Tam3 has been described at two unlinked loci pallida and nivea, both of which are required for the production of anthocyanin pigment in flowers. In each case the element is inserted in the promoter region and gives a variegated phenotype. We show that the rate of Tam3 excision at both loci is greatly affected by temperature, being approximately 1000-fold higher at 15°C compared with 25°C. Tam3 is also controlled by an unlinked gene Stabiliser, which considerably reduces excision rate. We show that the high degree of sensitivity to temperature and Stabiliser is an intrinsic property of Tam3 which is not shared by an unrelated element, Tam1. The Tam3 insertion at nivea gives rise to a series of alleles which confer reduced pigmentation, novel spatial patterns and changed instability. These are probably a result of imprecise excision and rearrangements of the Tam3 element.     

De novo activation of the transposable element Tam2 of Antirrhinum majus

Summary The nivea locus of Antirrhinum majus encodes the enzyme chalcone synthase required for the synthesis of red anthocyanin pigment. The stable allele niv-44 contains an insertion in the nivea gene (Tam2) which has all the structural features of a transposable element. We have shown that this insertion can excise from the nivea locus when niv-44 is combined with another allele (niv-99) in a heterozygote. Activation of Tam2 excision is caused by a factor tightly linked to the niv-99 allele and may be due to complementation between Tam2 and a related element, Tam1. Factors which repress the excision of Tam2 and Tam1 are also described. Repression is not inherited in a simple mendelian way. Many stable mutations may be due to the insertion of transposable elements. Our data suggest that their stability may be due to the absence in the genome of activating factors and to the presence of repressors.     

Position effect of the excision frequency of the Antirrhinum transposon Tam3: implications for the degree of position-dependent methylation in the ends of the element

We identified eight independent Tam3 copies residing in the same Antirrhinum majus genome. All the copies showed excision at 15 °C, but not at 25 °C. Under conditions promoting excision, each copy appeared to transpose in the leaves and flower lobes with a nearly constant frequency, whereas individual transposition abilities varied widely: the most active copy had an excision frequency more than 100-fold greater than that of the least active one. Despite the different transposition abilities, the structures of the eight Tam3 copies were almost identical. These results made it clear that the transpositional ability of Tam3 is regulated by chromosomal position, but they do not imply position-dependent transposase activity. The position effect of the Tam3 transposition was found to be correlated to the methylation state of the copy's end regions: DNA methylation in the Tam3 end regions tended to suppress the excision activity, and the degree of methylation was dependent on the chromosomal position. Our results also provide evidence of de novo methylation provoked by transposition of the endogenous element. We propose a mechanism of transpositional regulation of plant transposons that responds to the degree of methylation as determined by chromosomal position.     

Trans-activation and stable integration of the maize transposable element Ds cotransfected with the Ac transposase gene in transgenic rice plants

To develop an efficient gene tagging system in rice, a plasmid was constructed carrying a non-autonomous maize Ds element in the untranslated leader sequence of a hygromycin B resistance gene fused with the 35S promoter of cauliflower mosaic virus. This plasmid was cotransfected by electroporation into rice protoplasts together with a plasmid containing the maize Ac transposase gene transcribed from the 35S promoter. Five lines of evidence obtained from the analyses of hygromycin B-resistant calli, regenerated plants and their progeny showed that the introduced Ds was trans-activated by the Ac transposase gene in rice. (1) Cotransfection of the two plasmids is necessary for generation of hygromycin B resistant transformants. (2) Ds excision sites are detected by Southern blot hybridization. (3) Characteristic sequence alterations are found at Ds excision sites. (4) Newly integrated Ds is detected in the rice genome. (5) Generation of 8 by target duplications is observed at the Ds integration sites on the rice chromosomes. Our results also show that Ds can be trans-activated by the transiently expressed Ac transposase at early stages of protoplast culture and integrated stably into the rice genome, while the cotransfected Ac transposase gene is not integrated. Segregation data from such a transgenic rice plant carrying no Ac transposase gene showed that four Ds copies were stably integrated into three different chromosomes, one of which also contained the functional hph gene restored by Ds excision. The results indicate that a dispersed distribution of Ds throughout genomes not bearing the active Ac transposase gene can be achieved by simultaneous transfection with Ds and the Ac transposase gene.     

Resistance to gap repair of the transposon Tam3 in Antirrhinum majus: a role of the end regions

The extremely homogeneous organization of the transposon family Tam3 in Antirrhinum majus is in sharp contrast to the heterogeneity of the copies constituting many other transposon families. To address the issue of the Tam3 structural uniformity, we examined two possibilities: (1) recent invasion of Tam3 and (2) failure of gap repair, which is involved in conversion from autonomous forms to defective forms. The phylogenetic analysis of 17 Tam3 copies suggested that the invasion of Tam3 into the Antirrhinum genome occurred at least 5 mya, which is sufficiently long ago to have produced many aberrant copies by gap repair. Thus, we investigated gap repair events at the nivea(recurrens:Tam3) (niv(rec)::Tam3) allele, where Tam3 is actively excised. We show here that the gap repair of de novo somatic Tam3 excision was arrested immediately after initiation of the process. All of the identified gap repair products were short stretches, no longer than 150 bp from the ends. The Tam3 ends have hairpin structures with low free energies. We observed that the gap repair halted within the hairpin structure regions. Such small gap repair products appear to be distributed in the Antirrhinum genome, but are unlikely to be active. Our data strongly suggest that the structural homogeneity of Tam3 was caused by immunity to gap repair at the hairpins in both of the end regions. The frequency of extensive gap repair of de novo excision products in eukaryotic transposons was found to be correlated with the free energies of the secondary structures in the end regions. This fact suggests that the fates of transposon families might depend on the structures of their ends.     

Immobilized copies with a nearly intact structure of the transposon Tam3 in Antirrhinum majus: implications for the cis-element related to the transposition

 In this study we have focused on two copies of the transposon Tam3 isolated from an Antirrhinum majus plant which has flower variegation due to the excision of Tam3 from the nivea locus. These two copies possess a high homology, over 95%, to an active Tam3 element found in the nivea ^{recurrence:Tam3} allele. Although somatic excision of the Tam3 copy from the nivea locus can be detected at 15°C by Southern blotting, neither of the two copies showed any sign of the excision. Both of the immobilized copies were also found in five varieties from different A. majus sources, all of which contain common fragments. The results suggest that the two copies have been fixed in the genomes of many A. majus varieties. Structural differences between these immobilized copies and the known active copy were mainly observed in the subterminal regions, including the terminal inverted repeats. The immobility of the two Tam3 copies might be due to mutations within the end regions of essential cis-elements in Tam3 transposition, as reported for Ac and En/Spm. Received: 30 June 1997 / Accepted: 5 August 1997     

Molecular and functional characterization of Slide, anAc-like autonomous transposable element from tobacco

A new transposable element of tobacco, Slide, was isolated from thetl mutant line, which shows somatic instability, after its transposition into a locus encoding nitrate reductase (NR). The Slide-124 element is 3733 bp long and its coding sequences show similarities with conserved domains of the transposases ofAc, Tam3 andhobo. Excision from the NR locus is detectable in somatic leaf tissues and Slide mobility is triggered by in vitro tissue culture. Slide excision events create footprints similar to those left byAc and Tam3. Tobacco lines derived from thetl mutant line seem characterized by unmethylated copies of a few members of the highly repetitive Slide family. Slide mobility was monitored in transient expression assays. In wild-type tobacco protoplasts, the complete Slide element, as well as a defective copy, is able to excise. The complete Slide element, but not the defective version, is able to excise in protoplasts of the heterologous species lettuce (Lactuca sativa). These results show that Slide carries the functions required for its own mobility, and represents the first autonomousAc-like element characterized inSolanaceae species.     

Use of the transposable element Ac/Ds in conjunction with Spm/dSpm for gene tagging allows extensive genome coverage with a limited number of starter lines: functional analysis of a four-element system in Arabidopsis thaliana

We have developed a novel four-element based gene tagging system in Arabidopsis to minimize the number of starter lines required to generate genome-wide insertions for saturation mutagenesis. In this system, the non-autonomous cassette, Ds(dSpm), comprises of both Ds and dSpm elements cloned one within the other along with appropriate selection markers to allow efficient monitoring of excision and re-integration of the transposons. Trans-activation of the outer borders (Ds) and selection against the negative selection marker (iaaH) linked to the cassette ensures unlinked spread of the Ds(dSpm) cassette from the initial site of integration of the T-DNA. This creates several launch pads within the genome from where the internal element (dSpm) can be subsequently mobilized to generate secondary insertions. In this study, starting from a single T-DNA integration we could spread the Ds(dSpm) cassette to 11 different locations over all the five chromosomes of Arabidopsis. The frequency of unlinked Ds transpositions in the F2 generation varied between 0.05 and 3.35%. Three of these lines were then deployed to trans-activate the internal dSpm element which led to the selection of 29 dSpm insertions. The study conclusively shows the feasibility of deploying Ds and the dSpm elements in a single construct for insertional mutagenesis.     

Interaction between the Tam1 and Tam2 transposable elements of Antirrhinum majus

Summary Two stable derivatives of the highly unstable niv-53::Tam1 allele of Antirrhinum majus were analysed. In both derivatives the Tam1 element is integrated at the same site and in the same orientation as in the parental niv-53::Tam1 allele. In both cases the Tam1 element was found to carry a 5 bp deletion (CACTA) in one of its termini. This explains the excision deficiency of these two alleles of Tam1, niv-53::Tam1-46 and niv-53::Tam1-49. Niv-44::Tam2, another stable nivea mutation, carries the 5 kb element Tam2, which is not a derivative of Tam1 but possesses identical terminal inverted repeats. When the stable lines 46 and 49 were corssed with line 44, suprisingly, a high number of the flowers in the F₁ displayed a variegated phenotype. Sequence analysis of two germinal revertants isolated from the heterozygote niv-53::Tam1-46/niv-44::Tam2 shows excision of the Tam2 element. This indicates that Tam2 is a defective element, which can be complemented by an active Tam1 element. However, the variegated F₁ phenotype observed is not inherited monofactorially. Variegation is seen only at particular times of development of the F₁ plants. These phenomena seem to involve both the Tam1 and Tam2 transposable elements.     

Activity of the transposon Tam3 in Antirrhinum and tobacco: possible role of DNA methylation.

The transposon Tam3 from Antirrhinum majus can transpose in a heterologous host (Nicotiana tabacum); thus the element is autonomous, probably encoding the specific information required for its own transposition. In transgenic tobacco Tam3 rapidly becomes methylated at its ends whilst adjacent flanking sequences remain hypomethylated. This methylation may account for our failure to detect Tam3 transposition in the progeny of transgenic tobacco. Treatment with the inhibitor of cytosine methylation, 5 aza-cytosine appeared to induce transposon related activity at a low level. In Antirrhinum methylation also appears to be associated with inactivation of Tam3 copies.     

The transposable element Tam3 of Antirrhinum majus generates a novel type of sequence alterations upon excision

Summary The 3.5 kb transposable element, Tam3, has been shown to cause somatic and germinal instability at the nivea locus, which encodes chalcone synthase, of Antirrhinum majus. Molecular cloning and sequence analysis of the niv-98::Tam3 allele revealed that the termini of Tam3 consist of 12 bp perfect inverted repeats. Tam3 is integrated in the promoter region of the chalcone synthase gene and generates an 8 bp duplication of target sequences upon integration. DNA sequencing of a niv ⁺x revertant, niv-164, revealed a new type of sequence alteration upon excision: the duplications are displaced by ten nucleotides generated from adjacent sequences. Structural similarities of Tam3 and the maize elements Ac/Ds suggest that these elements belong to a common family.Dedicated to Professor Georg Melchers to celebrate his 50-year association with the journal     

Frequency and distance of transposition of a modifiedDissociation element in transgenic tobacco

Effective transposon tagging with theAc/Ds system in heterologous plant species relies on the accomplishment of a potentially high transposon-induced mutation frequency. The primary parameters that determine the mutation frequency include the transposition frequency and the transposition distance. In addition, the development of a generally applicable transposon tagging strategy requires predictable transposition behaviour. We systematically analysedDs transposition frequencies andDs transposition distances in tobacco. An artificialDs element was engineered with reporter genes that allowed transposon excision and integration to be monitored visually. To analyse the variability ofDs transposition between different tobacco lines, eight single copy T-DNA transformants were selected. Fortrans-activation of theDs elements, differentAc lines were used carrying an unmodifiedAc ⁺ element, an immobilizedsAc element and a stableAc element under the control of a heterologous chalcone synthas (chsA) promoter. With allAc elements, eachDs line showed characteristic and heritable variegation patterns at the seedling level. SimilarDs line-specificity was observed for the frequency by whichDs transpositions were germinally transmitted, as well as for the distances of theDs transpositions. ThesAc element induced transposition ofDs late in plant development, resulting in low germinal transposition frequencies (0.37%) and high incidences of independent transposition (83%). The majority of theseDs elements (58%) transposed to genetically closed linked sites (10 cM).     

Genome juggling by transposons: Tam3-induced rearrangements in Antirrhinum majus

Transposable elements are well known for their ability to generate large- and small-scale rearrangements of the sequences flanking their insertion sites. These include deletions, inversions, and duplications. Tam3, a transposon from the Snapdragon (Antirrhinum majus), is highly active in the generation of such rearrangements. We have analysed a number of Tam3-induced rearrangements at the nivea (niv) locus by Southern blotting, cloning, and sequence determination. The data obtained from these analyses have led to an understanding of the mechanisms by which these complex alleles were formed. We have shown that the primary rearrangements usually occur without excision of the element and therefore result from aberrant transposition attempts. Subsequent rearrangements may occur on excision of the element. Finally, we suggest how the analysis of such rearrangements may not only provide information about Tam3 transposition but also show how transposon-induced rearrangements may influence the structure and function of the genome as a whole.     

Identification of a defective transposable element in tobacco

A putative defective transposable element has been identified in tobacco. This element has been found and characterised in two separate parts of the tobacco genome, specifically within the 3rd intron of the pollen-specific polygalacturonase gene (Npg1) and upstream of the endochitinase gene (Chn50). The element is ca. 0.4 kb in length and is bounded by conserved inverted repeats and putative target site duplications. It appears to fall into the category of non-autonomous transposable elements.