Sequencing historical specimens: successful preparation of small specimens with low amounts of degraded DNA

Despite advances that allow DNA sequencing of old museum specimens, sequencing small‐bodied, historical specimens can be challenging and unreliable as many contain only small amounts of fragmented DNA. Dependable methods to sequence such specimens are especially critical if the specimens are unique. We attempt to sequence small‐bodied (3–6 mm) historical specimens (including nomenclatural types) of beetles that have been housed, dried, in museums for 58–159 years, and for which few or no suitable replacement specimens exist. To better understand ideal approaches of sample preparation and produce preparation guidelines, we compared different library preparation protocols using low amounts of input DNA (1–10 ng). We also explored low‐cost optimizations designed to improve library preparation efficiency and sequencing success of historical specimens with minimal DNA, such as enzymatic repair of DNA. We report successful sample preparation and sequencing for all historical specimens despite our low‐input DNA approach. We provide a list of guidelines related to DNA repair, bead handling, reducing adapter dimers and library amplification. We present these guidelines to facilitate more economical use of valuable DNA and enable more consistent results in projects that aim to sequence challenging, irreplaceable historical specimens.     

Exome Sequencing from Nanogram Amounts of Starting DNA: Comparing Three Approaches

Hybridization-based target enrichment protocols require relatively large starting amounts of genomic DNA, which is not always available. Here, we tested three approaches to pre-capture library preparation starting from 10 ng of genomic DNA: (i and ii) whole-genome amplification of DNA samples with REPLI-g (Qiagen) and GenomePlex (Sigma) kits followed by standard library preparation, and (iii) library construction with a low input oriented ThruPLEX kit (Rubicon Genomics). Exome capture with Agilent SureSelect^XT2 Human AllExon v4+UTRs capture probes, and HiSeq2000 sequencing were performed for test libraries along with the control library prepared from 1 µg of starting DNA. Tested protocols were characterized in terms of mapping efficiency, enrichment ratio, coverage of the target region, and reliability of SNP genotyping. REPLI-g- and ThruPLEX-FD-based protocols seem to be adequate solutions for exome sequencing of low input samples.     

Ultraconserved elements anchor thousands of genetic markers spanning multiple evolutionary timescales

Although massively parallel sequencing has facilitated large-scale DNA sequencing, comparisons among distantly related species rely upon small portions of the genome that are easily aligned. Methods are needed to efficiently obtain comparable DNA fragments prior to massively parallel sequencing, particularly for biologists working with non-model organisms. We introduce a new class of molecular marker, anchored by ultraconserved genomic elements (UCEs), that universally enable target enrichment and sequencing of thousands of orthologous loci across species separated by hundreds of millions of years of evolution. Our analyses here focus on use of UCE markers in Amniota because UCEs and phylogenetic relationships are well-known in some amniotes. We perform an in silico experiment to demonstrate that sequence flanking 2030 UCEs contains information sufficient to enable unambiguous recovery of the established primate phylogeny. We extend this experiment by performing an in vitro enrichment of 2386 UCE-anchored loci from nine, non-model avian species. We then use alignments of 854 of these loci to unambiguously recover the established evolutionary relationships within and among three ancient bird lineages. Because many organismal lineages have UCEs, this type of genetic marker and the analytical framework we outline can be applied across the tree of life, potentially reshaping our understanding of phylogeny at many taxonomic levels.     

New approaches to species delimitation and population structure of anthozoans: Two case studies of octocorals using ultraconserved elements and exons

As coral populations decline worldwide in the face of ongoing environmental change, documenting their distribution, diversity and conservation status is now more imperative than ever. Accurate delimitation and identification of species is a critical first step. This task, however, is not trivial as morphological variation and slowly evolving molecular markers confound species identification. New approaches to species delimitation in corals are needed to overcome these challenges. Here, we test whether target enrichment of ultraconserved elements (UCEs) and exons can be used for delimiting species boundaries and population structure within species of corals by focusing on two octocoral genera, Alcyonium and Sinularia, as exemplary case studies. We designed an updated bait set (29,181 baits) to target‐capture 3,023 UCE and exon loci, recovering a mean of 1,910 ± 168 SD per sample with a mean length of 1,055 ± 208 bp. Similar numbers of loci were recovered from Sinularia (1,946 ± 227 SD) and Alcyonium (1,863 ± 177 SD). Species‐level phylogenies were highly supported for both genera. Clustering methods based on filtered single nucleotide polymorphisms delimited species and populations that are congruent with previous allozyme, DNA barcoding, reproductive and ecological data for Alcyonium, and offered further evidence of hybridization among species. For Sinularia, results were congruent with those obtained from a previous study using restriction site associated DNA sequencing. Both case studies demonstrate the utility of target‐enrichment of UCEs and exons to address a wide range of evolutionary and taxonomic questions across deep to shallow timescales in corals.     

Sequence capture phylogenomics of historical ethanol‐preserved museum specimens: Unlocking the rest of the vault

Natural history collections play a crucial role in biodiversity research, and museum specimens are increasingly being incorporated into modern genetics‐based studies. Sequence capture methods have proven incredibly useful for phylogenomics, providing the additional ability to sequence historical museum specimens with highly degraded DNA, which until recently have been deemed less valuable for genetic work. The successful sequencing of ultraconserved elements (UCEs) from historical museum specimens has been demonstrated on multiple tissue types including dried bird skins, formalin‐fixed squamates and pinned insects. However, no study has thoroughly demonstrated this approach for historical ethanol‐preserved museum specimens. Alongside sequencing of “fresh” specimens preserved in >95% ethanol and stored at ?80°C, we used extraction techniques specifically designed for degraded DNA coupled with sequence capture protocols to sequence UCEs from historical museum specimens preserved in 70%–80% ethanol and stored at room temperature, the standard for such ethanol‐preserved museum collections. Across 35 fresh and 15 historical museum samples of the arachnid order Opiliones, an average of 345 UCE loci were included in phylogenomic matrices, with museum samples ranging from six to 495 loci. We successfully demonstrate the inclusion of historical ethanol‐preserved museum specimens in modern sequence capture phylogenomic studies, show a high frequency of variant bases at the species and population levels, and from off‐target reads successfully recover multiple loci traditionally sequenced in multilocus studies including mitochondrial loci and nuclear rRNA loci. The methods detailed in this study will allow researchers to potentially acquire genetic data from millions of ethanol‐preserved museum specimens held in collections worldwide.     

Partition Enrichment of Nucleotide Sequences (PINS) - A Generally Applicable,Sequence Based Method for Enrichment of Complex DNA Samples

The dwindling cost of DNA sequencing is driving transformative changes in various biological disciplines including medicine, thus resulting in an increased need for routine sequencing. Preparation of samples suitable for sequencing is the starting point of any practical application, but enrichment of the target sequence over background DNA is often laborious and of limited sensitivity thereby limiting the usefulness of sequencing. The present paper describes a new method, Probability directed Isolation of Nucleic acid Sequences (PINS), for enrichment of DNA, enabling the sequencing of a large DNA region surrounding a small known sequence. A 275,000 fold enrichment of a target DNA sample containing integrated human papilloma virus is demonstrated. Specifically, a sample containing 0.0028 copies of target sequence per ng of total DNA was enriched to 786 copies per ng. The starting concentration of 0.0028 target copies per ng corresponds to one copy of target in a background of 100,000 complete human genomes. The enriched sample was subsequently amplified using rapid genome walking and the resulting DNA sequence revealed not only the sequence of a the truncated virus, but also 1026 base pairs 5′ and 50 base pairs 3′ to the integration site in chromosome 8. The demonstrated enrichment method is extremely sensitive and selective and requires only minimal knowledge of the sequence to be enriched and will therefore enable sequencing where the target concentration relative to background is too low to allow the use of other sample preparation methods or where significant parts of the target sequence is unknown.     

Discovery of rare mutations in extensively pooled DNA samples using multiple target enrichment

Chemical mutagenesis is routinely used to create large numbers of rare mutations in plant and animal populations, which can be subsequently subjected to selection for beneficial traits and phenotypes that enable the characterization of gene functions. Several next‐generation sequencing (NGS)‐based target enrichment methods have been developed for the detection of mutations in target DNA regions. However, most of these methods aim to sequence a large number of target regions from a small number of individuals. Here, we demonstrate an effective and affordable strategy for the discovery of rare mutations in a large sodium azide‐induced mutant rice population (F₂). The integration of multiplex, semi‐nested PCR combined with NGS library construction allowed for the amplification of multiple target DNA fragments for sequencing. The 8 × 8 × 8 tridimensional DNA sample pooling strategy enabled us to obtain DNA sequences of 512 individuals while only sequencing 24 samples. A stepwise filtering procedure was then elaborated to eliminate most of the false positives expected to arise through sequencing error, and the application of a simple Student's t‐test against position‐prone error allowed for the discovery of 16 mutations from 36 enriched targeted DNA fragments of 1024 mutagenized rice plants, all without any false calls.     

Characterizing restriction enzyme‐associated loci in historic ragweed (Ambrosia artemisiifolia) voucher specimens using custom‐designed RNA probes

Population genetic studies of nonmodel organisms frequently employ reduced representation library (RRL) methodologies, many of which rely on protocols in which genomic DNA is digested by one or more restriction enzymes. However, because high molecular weight DNA is recommended for these protocols, samples with degraded DNA are generally unsuitable for RRL methods. Given that ancient and historic specimens can provide key temporal perspectives to evolutionary questions, we explored how custom‐designed RNA probes could enrich for RRL loci (Restriction Enzyme‐Associated Loci baits, or REALbaits). Starting with genotyping‐by‐sequencing (GBS) data generated on modern common ragweed (Ambrosia artemisiifolia L.) specimens, we designed 20 000 RNA probes to target well‐characterized genomic loci in herbarium voucher specimens dating from 1835 to 1913. Compared to shotgun sequencing, we observed enrichment of the targeted loci at 19‐ to 151‐fold. Using our GBS capture pipeline on a data set of 38 herbarium samples, we discovered 22 813 SNPs, providing sufficient genomic resolution to distinguish geographic populations. For these samples, we found that dilution of REALbaits to 10% of their original concentration still yielded sufficient data for downstream analyses and that a sequencing depth of ~7m reads was sufficient to characterize most loci without wasting sequencing capacity. In addition, we observed that targeted loci had highly variable rates of success, which we primarily attribute to similarity between loci, a trait that ultimately interferes with unambiguous read mapping. Our findings can help researchers design capture experiments for RRL loci, thereby providing an efficient means to integrate samples with degraded DNA into existing RRL data sets.     

Methylome analysis using MeDIP-seq with low DNA concentrations

DNA methylation is an epigenetic mark that has a crucial role in many biological processes. To understand the functional consequences of DNA methylation on phenotypic plasticity, a genome-wide analysis should be embraced. This in turn requires a technique that balances accuracy, genome coverage, resolution and cost, yet is low in DNA input in order to minimize the drain on precious samples. Methylated DNA immunoprecipitation-sequencing (MeDIP-seq) fulfils these criteria, combining MeDIP with massively parallel DNA sequencing. Here we report an improved protocol using 100-fold less genomic DNA than that commonly used. We show comparable results for specificity (>97%) and enrichment (>100-fold) over a wide range of DNA concentrations (5,000-50 ng) and demonstrate the utility of the protocol for the generation of methylomes from rare bone marrow cells using 160-300 ng of starting DNA. The protocol described here, i.e., DNA extraction to generation of MeDIP-seq library, can be completed within 3-5 d.     

Comparative analysis of three methods from dried blood spots for expeditious DNA extraction from mosquitoes; suitable for PCR based techniques

The objective of this work was to compare the quality, purity and quantity of DNA isolated from dried blood spots (DBS) by three methods (Chelex-100, QIAamp DNA mini kit, and TE (Tris EDTA)-Buffer). Sample collection was performed in six districts in Odisha, India and screened for cases of clinical malaria and dengue and vector density. Mosquito abdomens were spotted on Whatman 3MM (MERCK) Filter paper and dried for 10 min at room temperature. DNA was isolated from DBS using three methods (Chelex-100, QIAamp DNA mini kit, and TE-Buffer), and PCR was used to determine the feeding behaviours of vector mosquitoes. DNA was quantified using a UV-spectrophotometer, and q-PCR was used to determine the target gene copy number to compare the methods. The QIAamp DNA mini kit method was used as the reference method. The yield and purity of DNA extracted with Chelex-100 and TE were 14–72 ng/µl and 1.51–1.85 and 9–50 ng/µl and 1.68–2.1, respectively. DNA extracted using the Chelex-100 method was stored for over 1 month at ? 20 °C and was suitable for later use. The Chelex-100 method had a sensitivity of 99.5% and specificity of 78%. A Bland–Altman plot suggested that the Chelex-100 method was similar to the QIAamp DNA mini kit method for determining the feeding behaviours of vector mosquitoes. The Chelex-100 method is simple, cost-effective, and safe and requires minimal time for DNA extraction from dried blood spots. In malaria and dengue research, detecting the feeding behaviours from mosquito DNA from dried blood spots on filter paper by PCR is an easy, minimally invasive and inexpensive molecular technique that can be performed in remote areas.

     

Accelerating plant DNA barcode reference library construction using herbarium specimens: improved experimental techniques

A well‐covered reference library is crucial for successful identification of species by DNA barcoding. The biggest difficulty in building such a reference library is the lack of materials of organisms. Herbarium collections are potentially an enormous resource of materials. In this study, we demonstrate that it is likely to build such reference libraries using the reconstructed (self‐primed PCR amplified) DNA from the herbarium specimens. We used 179 rosaceous specimens to test the effects of DNA reconstruction, 420 randomly sampled specimens to estimate the usable percentage and another 223 specimens of true cherries (Cerasus, Rosaceae) to test the coverage of usable specimens to the species. The barcode rbcLb (the central four‐sevenths of rbcL gene) and matK was each amplified in two halves and sequenced on Roche GS 454 FLX+. DNA from the herbarium specimens was typically shorter than 300 bp. DNA reconstruction enabled amplification fragments of 400–500 bp without bringing or inducing any sequence errors. About one‐third of specimens in the national herbarium of China (PE) were proven usable after DNA reconstruction. The specimens in PE cover all Chinese true cherry species and 91.5% of vascular species listed in Flora of China. It is very possible to build well‐covered reference libraries for DNA barcoding of vascular species in China. As exemplified in this study, DNA reconstruction and DNA‐labelled next‐generation sequencing can accelerate the construction of local reference libraries. By putting the local reference libraries together, a global library for DNA barcoding becomes closer to reality.     

Utilizing field collected insects for next generation sequencing: Effects of sampling,storage, and DNA extraction methods

DNA sequencing technologies continue to advance the biological sciences, expanding opportunities for genomic studies of non‐model organisms for basic and applied questions. Despite these opportunities, many next generation sequencing protocols have been developed assuming a substantial quantity of high molecular weight DNA (>100 ng), which can be difficult to obtain for many study systems. In particular, the ability to sequence field‐collected specimens that exhibit varying levels of DNA degradation remains largely unexplored. In this study we investigate the influence of five traditional insect capture and curation methods on Double‐Digest Restriction Enzyme Associated DNA (ddRAD) sequencing success for three wild bee species. We sequenced a total of 105 specimens (between 7–13 specimens per species and treatment). We additionally investigated how different DNA quality metrics (including pre‐sequence concentration and contamination) predicted downstream sequencing success, and also compared two DNA extraction methods. We report successful library preparation for all specimens, with all treatments and extraction methods producing enough highly reliable loci for population genetic analyses. Although results varied between species, we found that specimens collected by net sampling directly into 100% EtOH, or by passive trapping followed by 100% EtOH storage before pinning tended to produce higher quality ddRAD assemblies, likely as a result of rapid specimen desiccation. Surprisingly, we found that specimens preserved in propylene glycol during field sampling exhibited lower‐quality assemblies. We provide recommendations for each treatment, extraction method, and DNA quality assessment, and further encourage researchers to consider utilizing a wider variety of specimens for genomic analyses.     

The impact of endogenous content,replicates and pooling on genome capture from faecal samples

Target‐capture approach has improved over the past years, proving to be very efficient tool for selectively sequencing genetic regions of interest. These methods have also allowed the use of noninvasive samples such as faeces (characterized by their low quantity and quality of endogenous DNA) to be used in conservation genomic, evolution and population genetic studies. Here we aim to test different protocols and strategies for exome capture using the Roche SeqCap EZ Developer kit (57.5 Mb). First, we captured a complex pool of DNA libraries. Second, we assessed the influence of using more than one faecal sample, extract and/or library from the same individual, to evaluate its effect on the molecular complexity of the experiment. We validated our experiments with 18 chimpanzee faecal samples collected from two field sites as a part of the Pan African Programme: The Cultured Chimpanzee. Those two field sites are in Kibale National Park, Uganda (N = 9) and Loango National Park, Gabon (N = 9). We demonstrate that at least 16 libraries can be pooled, target enriched through hybridization, and sequenced allowing for the genotyping of 951,949 exome markers for population genetic analyses. Further, we observe that molecule richness, and thus, data acquisition, increase when using multiple libraries from the same extract or multiple extracts from the same sample. Finally, repeated captures significantly decrease the proportion of off‐target reads from 34.15% after one capture round to 7.83% after two capture rounds, supporting our conclusion that two rounds of target enrichment are advisable when using complex faecal samples.     

A comprehensive DNA barcode database for Central European beetles with a focus on Germany: adding more than 3500 identified species to BOLD

Beetles are the most diverse group of animals and are crucial for ecosystem functioning. In many countries, they are well established for environmental impact assessment, but even in the well‐studied Central European fauna, species identification can be very difficult. A comprehensive and taxonomically well‐curated DNA barcode library could remedy this deficit and could also link hundreds of years of traditional knowledge with next generation sequencing technology. However, such a beetle library is missing to date. This study provides the globally largest DNA barcode reference library for Coleoptera for 15 948 individuals belonging to 3514 well‐identified species (53% of the German fauna) with representatives from 97 of 103 families (94%). This study is the first comprehensive regional test of the efficiency of DNA barcoding for beetles with a focus on Germany. Sequences ≥500 bp were recovered from 63% of the specimens analysed (15 948 of 25 294) with short sequences from another 997 specimens. Whereas most specimens (92.2%) could be unambiguously assigned to a single known species by sequence diversity at CO1, 1089 specimens (6.8%) were assigned to more than one Barcode Index Number (BIN), creating 395 BINs which need further study to ascertain if they represent cryptic species, mitochondrial introgression, or simply regional variation in widespread species. We found 409 specimens (2.6%) that shared a BIN assignment with another species, most involving a pair of closely allied species as 43 BINs were involved. Most of these taxa were separated by barcodes although sequence divergences were low. Only 155 specimens (0.97%) show identical or overlapping clusters.     

A MBD-seq protocol for large-scale methylome-wide studies with (very) low amounts of DNA

We recently showed that, after optimization, our methyl-CpG binding domain sequencing (MBD-seq) application approximates the methylome-wide coverage obtained with whole-genome bisulfite sequencing (WGB-seq), but at a cost that enables adequately powered large-scale association studies. A prior drawback of MBD-seq is the relatively large amount of genomic DNA (ideally >1 µg) required to obtain high-quality data. Biomaterials are typically expensive to collect, provide a finite amount of DNA, and may simply not yield sufficient starting material. The ability to use low amounts of DNA will increase the breadth and number of studies that can be conducted. Therefore, we further optimized the enrichment step. With this low starting material protocol, MBD-seq performed equally well, or better, than the protocol requiring ample starting material (>1 µg). Using only 15 ng of DNA as input, there is minimal loss in data quality, achieving 93% of the coverage of WGB-seq (with standard amounts of input DNA) at similar false/positive rates. Furthermore, across a large number of genomic features, the MBD-seq methylation profiles closely tracked those observed for WGB-seq with even slightly larger effect sizes. This suggests that MBD-seq provides similar information about the methylome and classifies methylation status somewhat more accurately. Performance decreases with <15 ng DNA as starting material but, even with as little as 5 ng, MBD-seq still achieves 90% of the coverage of WGB-seq with comparable genome-wide methylation profiles. Thus, the proposed protocol is an attractive option for adequately powered and cost-effective methylome-wide investigations using (very) low amounts of DNA.