Effect of one D‐Leu residue on right‐handed helical ‐L‐Leu‐Aib‐ peptides in the crystal state

Four diastereomeric‐Leu‐Leu‐Aib‐Leu‐Leu‐Aib‐peptides, Boc‐D ‐Leu‐L ‐Leu‐Aib‐L ‐Leu‐L ‐Leu‐Aib‐OMe (1), Boc‐L ‐Leu‐D ‐Leu‐Aib‐L ‐Leu‐L ‐Leu‐Aib‐OMe (2), Boc‐L ‐Leu‐L ‐Leu‐Aib‐D ‐Leu‐L ‐Leu‐Aib‐OMe (3), and Boc‐L ‐Leu‐L ‐Leu‐Aib‐L ‐Leu‐D ‐Leu‐Aib‐OMe (4), were synthesized. The crystals of the four hexapeptides were characterized by X‐ray crystallographic analysis. Two diastereomeric hexapeptides 1 and 2 having D ‐Leu(1) or D ‐Leu(2) were folded into right‐handed (P) 3 ₁₀ ‐helical structures, while peptide 3 having D ‐Leu(4) was folded into a turn structure nucleated by type III′ and I$' \bf{\beta}$ ‐turns, and peptide 4 having D ‐Leu(5) was folded into a left‐handed (M) 3 ₁₀ ‐helical structure. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Conformational preferences of a short Aib/Ala‐based water‐soluble peptide as a function of temperature

The amino acid Aib predisposes a peptide to be helical with context‐dependent preference for either 3₁₀‐ or α‐ or a mixed helical conformation. Short peptides also show an inherent tendency to be unfolded. To characterize helical and unfolded states adopted by water‐soluble Aib‐containing peptides, the conformational preference of Ac‐Ala‐Aib‐Ala‐Lys‐Ala‐Aib‐Lys‐Ala‐Lys‐Ala‐Aib‐Tyr‐NH₂ was determined by CD, NMR and MD simulations as a function of temperature. Temperature‐dependent CD data indicated the contribution of two major components, each an admixture of helical and extended/polyproline II structures. Both right‐ and left‐handed helical conformations were detected from deconvolution of CD data and ¹³C NMR experiments. The presence of a helical backbone, more pronounced at the N‐terminal, and a temperature‐induced shift in α‐helix/3₁₀‐helix equilibrium, more pronounced at the C‐terminal, emerged from NMR data. Starting from polyproline II, the N‐terminal of the peptide folded into a helical backbone in MD simulations within 5 ns at 60°C. Longer simulations showed a mixed‐helical backbone to be stable over the entire peptide at 5°C while at 60°C the mixed‐helix was either stable at the N‐terminus or occurred in short stretches through out the peptide, along with a significant population of polyproline II. Our results point towards conformational heterogeneity of water‐soluble Aib‐based peptide helices and the associated subtleties. The problem of analyzing CD and NMR data of both left‐ and right‐handed helices are discussed, especially the validity of the ellipticity ratio [θ]₂₂₂/[θ]₂₀₇, as a reporter of α‐/3₁₀‐ population ratio, in right‐ and left‐handed helical mixtures. Proteins 2009. © 2008 Wiley‐Liss, Inc.     

Conformations of helical Aib peptides containing a pair of l‐amino acid and d‐amino acid

A pair of l ‐leucine (l ‐Leu) and d ‐leucine (d ‐Leu) was incorporated into α‐aminoisobutyric acid (Aib) peptide segments. The dominant conformations of four hexapeptides, Boc‐l ‐Leu‐Aib‐Aib‐Aib‐Aib‐l ‐Leu‐OMe (1a), Boc‐d ‐Leu‐Aib‐Aib‐Aib‐Aib‐l ‐Leu‐OMe (1b), Boc‐Aib‐Aib‐l ‐Leu‐l ‐Leu‐Aib‐Aib‐OMe (2a), and Boc‐Aib‐Aib‐d ‐Leu‐l ‐Leu‐Aib‐Aib‐OMe (2b), were investigated by IR, ¹H NMR, CD spectra, and X‐ray crystallographic analysis. All peptides 1a,b and 2a,b formed 3₁₀‐helical structures in solution. X‐ray crystallographic analysis revealed that right‐handed (P) 3₁₀‐helices were present in 1a and 1b and a mixture of right‐handed (P) and left‐handed (M) 3₁₀‐helices was present in 2b in their crystalline states. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Controlling the helical screw sense of peptides with C‐terminal L‐valine

One chiral L ‐valine (L ‐Val) was inserted into the C‐terminal position of achiral peptide segments constructed from α‐aminoisobutyric acid (Aib) and α,β‐dehydrophenylalanine (Δ^ZPhe) residues. The IR, ¹H NMR and CD spectra indicated that the dominant conformations of the pentapeptide Boc‐Aib‐ΔPhe‐(Aib)₂‐L ‐Val‐NH‐Bn (3) and the hexapeptide Boc‐Aib‐ΔPhe‐(Aib)₃‐L ‐Val‐NH‐Bn (4) in solution were both right‐handed (P) 3₁₀‐helical structures. X‐ray crystallographic analyses of 3 and 4 revealed that only a right‐handed (P) 3₁₀‐helical structure was present in their crystalline states. The conformation of 4 was also studied by molecular‐mechanics calculations. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Ribbon structure stabilized by C10 and C12 turns in αγ hybrid peptide

The present study describes the synthesis and crystallographic analysis of αγ hybrid peptides, Boc‐Gpn‐L‐Pro‐NHMe ( 1 ), Boc‐Aib‐Gpn‐L‐Pro‐NHMe ( 2 ), and Boc‐L‐Pro‐Aib‐Gpn‐L‐Pro‐NHMe ( 3 ). Peptides 1 and 2 adopt expanded 12‐membered (C₁₂) helical turn over γα segment. Peptide 3 promotes the ribbon structure stabilized by type II β‐turn (C₁₀) followed by the expanded C₁₂ helical γα turn. Both right‐handed and left‐handed helical conformations for Aib residue are observed in peptides 2 and 3 , respectively Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Stereochemistry of Schellman motifs in peptides: Crystal structure of a hexapeptide with a C‐terminus 6 → 1 hydrogen bond

The Schellman motif is a widely observed helix terminating structural motif in proteins, which is generated when the C‐terminus residue adopts a left‐handed helical (α_L) conformation. The resulting hydrogen‐bonding pattern involves the formation of an intramolecular 6 → 1 interaction. This helix terminating motif is readily mimicked in synthetic helical peptides by placing an achiral residue at the penultimate position of the sequence. Thus far, the Schellman motif has been characterized crystallographically only in peptide helices of length 7 residues or greater. The structure of the hexapeptide Boc–Pro–Aib–Gly–Leu–Aib–Leu–OMe in crystals reveal a short helical stretch terminated by a Schellman motif, with the formation of 6 → 1 C‐terminus hydrogen bond. The crystals are in the space group P2₁2₁2₁ with a = 18.155(3) Å, b = 18.864(8) Å, c = 11.834(4) Å, and Z = 4 . The final R₁ and wR₂ values are 7.68 and 14.6%, respectively , for 1524 observed reflections [F_o ≥ 3ς(F_o)]. A 6 → 1 hydrogen bond between Pro(1)CO · · · Leu(6)NH and a 5 → 2 hydrogen bond between Aib(2)CO · · · Aib(5)NH are observed. An analysis of the available oligopeptides having an achiral Aib residue at the penultimate position suggests that chain length and sequence effects may be the other determining factors in formation of Schellman motifs. © 1999 John Wiley & Sons, Inc. Biopoly 50: 13–22, 1999     

Terminal effect of chiral residue on helical screw sense in achiral peptides

To understand the terminal effect of chiral residue for determining a helical screw sense, we adopted five kinds of peptides I – V containing N‐ and/or C‐terminal chiral Leu residue(s): Boc–L ‐Leu–(Aib–ΔPhe)₂–Aib–OMe ( I ), Boc–(Aib–ΔPhe)₂–L ‐Leu–OMe ( II ), Boc–L ‐Leu–(Aib–ΔPhe)₂–L ‐Leu–OMe ( III ), Boc–D ‐Leu–(Aib–ΔPhe)₂–L ‐Leu–OMe ( IV ), and Boc–D ‐Leu–(Aib–ΔPhe)₂–Aib–OMe ( V ). The segment –(Aib–ΔPhe)₂– was used for a backbone composed of two “enantiomeric” (left‐/right‐handed) helices. Actually, this could be confirmed by ¹H‐nmr [nuclear Overhauser effect (NOE) and solvent accessibility of NH resonances] and CD spectroscopy on Boc–(Aib–ΔPhe)₂–Aib–OMe, which took a left‐/right‐handed 3₁₀‐helix. Peptides I – V were also found to take 3₁₀‐type helical conformations in CDCl₃, from difference NOE measurement and solvent accessibility of NH resonances. Chloroform, acetonitrile, methanol, and tetrahydrofuran were used for CD measurement. The CD spectra of peptides I – III in all solvents showed marked exciton couplets with a positive peak at longer wavelengths, indicating that their main chains prefer a left‐handed screw sense over a right‐handed one. Peptide V in all solvents showed exciton couplets with a negative peak at longer wavelengths, indicating it prefers a right‐handed screw sense. Peptide IV in chloroform showed a nonsplit type CD pattern having only a small negative signal around 280 nm, meaning that left‐ and right‐handed helices should exist with almost the same content. In the other solvents, peptide IV showed exciton couplets with a negative peak at longer wavelengths, corresponding to a right‐handed screw sense. From conformational energy calculation and the above ¹H‐nmr studies, an N‐ or C‐terminal L ‐Leu residue in the lowest energy left‐handed 3₁₀‐helical conformation was found to take an irregular conformation that deviates from a left‐handed helix. The positional effect of the L ‐residue on helical screw sense was discussed based on CD data of peptides I – V and of Boc–(L ‐Leu–ΔPhe)_n–L ‐Leu–OMe (n = 2 and 3). © 1999 John Wiley & Sons, Inc. Biopoly 49: 551–564, 1999     

Conformations of peptides containing a chiral cyclic α, α‐disubstituted α‐amino acid within the sequence of Aib residues

A single chiral cyclic α,α‐disubstituted amino acid, (3S,4S)‐1‐amino‐(3,4‐dimethoxy)cyclopentanecarboxylic acid [(S,S)‐Ac₅c^dOM], was placed at the N‐terminal or C‐terminal positions of achiral α‐aminoisobutyric acid (Aib) peptide segments. The IR and ¹H NMR spectra indicated that the dominant conformations of two peptides Cbz‐[(S,S)‐Ac₅c^dOM]‐(Aib)₄‐OEt ( 1) and Cbz‐(Aib)₄‐[(S,S)‐Ac₅c^dOM]‐OMe (2) in solution were helical structures. X‐ray crystallographic analysis of 1 and 2 revealed that a left‐handed (M) 3₁₀‐helical structure was present in 1 and that a right‐handed (P) 3₁₀‐helical structure was present in 2 in their crystalline states. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Characterization of a type of β‐bend ribbon spiral generated by the repeating (Xaa–Yaa–Aib–Pro) motif: The solution structure of harzianin HC IX,a 14‐residue peptaibol forming voltage‐dependent ion channels

The three‐dimensional solution structure of harzianin HC IX, a peptaibol antibiotic isolated from the fungus Trichoderma harzianum, was determined using CD, homonuclear, and heteronuclear two‐dimensional nmr spectroscopy combined with molecular modeling. This 14‐residue peptide, Ac Aib¹ Asn² Leu³ Aib⁴ Pro⁵ Ala⁶ Ile⁷ Aib⁸ Pro⁹ Iva¹⁰ Leu¹¹ Aib¹² Pro¹³ Leuol¹⁴ (Aib, α‐aminoisobutyric acid; Iva, isovaline; Leuol, leucinol), is a main representative of a short‐sequence peptaibol class characterized by an acetylated N‐terminus, a C‐terminal amino alcohol, and the presence of three Aib‐L ‐Pro motifs at positions 4–5, 8–9, and 12–13, separated by two dipeptide units. In spite of a lower number of residues, compared to the 18/20‐residue peptaibols such as alamethicin, harzianin HC IX exhibits remarkable membrane‐perturbing properties. It interacts with phospholipid bilayers, increasing their permeability and forming voltage‐gated ion channels through a mechanism slightly differing from that proposed for alamethicin. Sequence‐specific ¹H‐ and ¹³C‐nmr assignments and conformational nmr parameters (³J_NHCαH coupling constants, quantitative nuclear Overhauser enhancement data, temperature coefficients of amide and carbonyl groups, NH–ND exchange rates) were obtained in methanol solution. Sixty structures were calculated based on 98 interproton distance restraints and 6 Φ dihedral angle restraints, using high temperature restrained molecular dynamics and energy minimization. Thirty‐seven out of the sixty generated structures were consistent with the nmr data and were convergent. The peptide backbone consists in a ribbon of overlapping β‐turns twisted into a continuous spiral from Asn² to Leuol¹⁴ and forming a 26 Å long helix‐like structure. This structure is slightly amphipathic, with the three Aib–Pro motifs aligned on the less hydrophobic face of the spiral where the Asn² side chain is also present, while the more hydrophobic bulky side chains of leucines, isoleucine, isovaline, and leucinol are located on the concave side. The repetitive (Xaa–Yaa–Aib–Pro) tetrapeptide subunit, making up the peptide sequence, is characterized by four sets of (Φ,Ψ) torsional angles, with the following mean values: Φ_i = −90°, Ψ_i = −27°; Φ_i+1 = −98°, Ψ_i+1 = −17°; Φ_i+2 = −49°, Ψ_i+2 = −50°; Φ_i+3 = −78°, Ψ_i+3 = +3°. We term this particular structure, specifically occurring in the case of (Xaa–Yaa–Aib–Pro)_n sequences, the (Xaa–Yaa–Aib–Pro)‐β‐bend ribbon spiral. It is stabilized by 4 → 1 intramolecular hydrogen bonds and differs from both the canonical 3₁₀‐helix made of a succession of type III β‐turns and from the β‐bend ribbon spiral that has been described in the case of (Aib–Pro)n peptide segments. © 1999 John Wiley & Sons, Inc. Biopoly 50: 71–85, 1999     

Surface Chirality of Gly‐Pro Dipeptide Adsorbed on a Cu(110) Surface

The adsorption of chiral Gly‐Pro dipeptide on Cu(110) has been characterized by combining in situ polarization modulation infrared reflection absorption spectroscopy (PM‐RAIRS) and X‐ray photoelectron spectroscopy (XPS). The chemical state of the dipeptide, and its anchoring points and adsorption geometry, were determined at various coverage values. Gly‐Pro molecules are present on Cu(110) in their anionic form (NH₂/COO⁻) and adsorb under a 3‐point binding via both oxygen atoms of the carboxylate group and via the nitrogen atom of the amine group. Low‐energy electron diffraction (LEED) and scanning tunneling microscopy (STM) have shown the presence of an extended 2D chiral array, sustained via intermolecular H‐bonds interactions. Furthermore, due to the particular shape of the molecule, only one homochiral domain is formed, creating thus a truly chiral surface. Chirality 27:411–416, 2015. © 2015 Wiley Periodicals, Inc.     

High‐molecular‐weight poly(Gly‐Val‐Gly‐Val‐Pro) synthesis through microwave irradiation

In this study, we synthesized a polypeptide from its pentapeptide unit using microwave irradiation. Effective methods for polypeptide synthesis from unit peptides have not been reported. Here, we used a key elastin peptide, H‐GlyValGlyValPro‐OH (GVGVP), as the monomer peptide. It is difficult to obtain poly(Gly‐Val‐Gly‐Val‐Pro) (poly(GVGVP)) from the pentapeptide unit of elastin, GVGVP, via polycondensation. Poly(GVGVP) prepared from genetically recombinant Escherichia coli is a well‐known temperature‐sensitive polypeptide, and this temperature sensitivity is known as the lower critical solution temperature. When microwave irradiation was performed in the presence of various additives, the pentapeptide (GVGVP) polycondensation reaction proceeded smoothly, resulting in a product with a high molecular weight in a relatively good yield. The reaction conditions, like microwave irradiation, coupling agents, and solvents, were optimized to increase the reaction efficiency. The product exhibited a molecular weight greater than Mr 7000. Further, the product could be synthesized on a gram scale. The synthesized polypeptide exhibited a temperature sensitivity that was similar to that of poly(GVGVP) prepared from genetically recombinant E. coli. Therefore, this technique offers a facile and quick approach to prepare polypeptides in large amounts. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Crystal structure of the collagen model peptide (Pro‐Pro‐Gly)4‐Hyp‐Asp‐Gly‐(Pro‐Pro‐Gly)4 at 1.0 Å resolution

The single‐crystal structure of the collagen‐like peptide (Pro‐Pro‐Gly)₄‐Hyp‐Asp‐Gly‐(Pro‐Pro‐Gly)₄, was analyzed at 1.02 Å resolution. The overall average helical twist (θ = 49.6°) suggests that this peptide adopts a 7/2 triple‐helical structure and that its conformation is very similar to that of (Gly‐Pro‐Hyp)₉, which has the typical repeating sequence in collagen. High‐resolution studies on other collagen‐like peptides have shown that imino acid‐rich sequences preferentially adopt a 7/2 triple‐helical structure (θ = 51.4°), whereas imino acid‐lean sequences adopt relaxed conformations (θ < 51.4°). The guest Gly‐Hyp‐Asp sequence in the present peptide, however, has a large helical twist (θ = 61.1°), whereas that of the host Pro‐Pro‐Gly sequence is small (θ = 46.7°), indicating that the relationship between the helical conformation and the amino acid sequence of such peptides is complex. In the present structure, a strong intermolecular hydrogen bond between two Asp residues on the A and B strands might induce the large helical twist of the guest sequence; this is compensated by a reduced helical twist in the host, so that an overall 7/2‐helical symmetry is maintained. The Asp residue in the C strand might interact electrostatically with the N‐terminus of an adjacent molecule, causing axial displacement, reminiscent of the D‐staggered structure in fibrous collagens. © 2013 Wiley Periodicals, Inc. Biopolymers 99: 436–447, 2013.     

Solution structure of a novel T‐cell adhesion inhibitor derived from the fragment of ICAM‐1 receptor: Cyclo(1,8)‐Cys‐Pro‐Arg‐Gly‐Gly‐Ser‐Val‐Cys

This study is aimed at elucidating the structure of a novel T‐cell adhesion inhibitor, cyclo(1,8)‐CPRGGSVC using one‐ and two‐dimensional (2D) ¹H NMR and molecular dynamics (MD) simulation. The peptide is derived from the sequence of its parent peptide cIBR (cyclo(1,12)‐PenPRGGSVLVTGC), which is a fragment of intercellular adhesion molecule‐1 (ICAM‐1). Our previous results show that the cyclo(1,8)‐CPRGGSVC peptide binds to the LFA‐1 I‐domain and inhibits heterotypic T‐cell adhesion, presumably by blocking the LFA‐1/ICAM‐1 interactions. The structure of the peptide was determined using NMR and MD simulation in aqueous solution. Our results indicate that the peptide adopts type‐I β‐turn conformation at the Pro2‐Arg3‐Gly4‐Gly5 (PRGG) sequence. The β‐turn structure at the PRGG motif is well conserved in cIBR peptide and ICAM‐1 receptor, which suggests the importance of the PRGG motif for the biological activity of cyclo(1,8)‐CPRGGSVC peptide. Meanwhile, the Gly5‐Ser6‐Val7‐Cys8‐Cys1 (GSVCC) sequence forms a “turn‐like” random coil structure that does not belong to any structured motif. Therefore, cyclo(1,8)‐CPRGGSVC peptide has only one structured region at the PRGG sequence, which may play an important role in the binding of the peptide to the LFA‐1 I‐domain. The conserved β‐turn conformation of the PRGG motif in ICAM‐1, cIBR, and cyclo(1,8)‐CPRGGSVC peptides can potentially be used to design peptidomimetics. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 633–641, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Handedness preference and switching of peptide helices. Part I: Helices based on protein amino acids

In this article, we review the relevant results obtained during almost 60 years of research on a specific aspect of stereochemistry, namely handedness preference and switches between right‐handed and left‐handed helical peptide structures generated by protein amino acids or appropriately designed, side‐chain modified analogs. In particular, we present and discuss here experimental and theoretical data on three categories of those screw‐sense issues: (i) right‐handed/left‐handed α‐helix transitions underwent by peptides rich in Asp, specific Asp β‐esters, and Asn; (ii) comparison of the preferred conformations adopted by helical host–guest peptide series, each characterized by an amino acid residue (e.g. Ile or its diastereomer aIle) endowed with two chiral centers in its chemical structure; and (iii) right‐handed (type I)/left‐handed (type II) poly‐(Pro)_n helix transitions monitored for peptides rich in Pro itself or its analogs with a pyrrolidine ring substitution, particularly at the biologically important position 4. The unique modular and chiral properties of peptides, combined with their relatively easy synthesis, the chance to shape them into the desired conformation, and the enormous chemical diversity of their coded and non‐coded α‐amino acid building blocks, offer a huge opportunity to structural chemists for applications to bioscience and nanoscience problems. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

The crystal structure of Z‐(Aib)10‐OH at 0.65 Å resolution: three complete turns of 310‐helix

The synthetic peptide Z‐(Aib)₁₀‐OH was crystallized from hot methanol by slow evaporation. The crystal used for data collection reflected synchrotron radiation to sub‐atomic resolution, where the bonding electron density becomes visible between the non‐hydrogen atoms. Crystals belong to the centrosymmetric space group P . Both molecules in the asymmetric unit form regular 3₁₀‐helices. All residues in each molecule possess the same handedness, which is in contrast to all other crystal structure determined to date of longer Aib‐homopeptides. These other peptides are C‐terminal protected by OtBu or OMe. In these cases, because of the missing ability of the C‐terminal protection group to form a hydrogen bond to the residue i‐3, the sense of the helix is reversed in the last residue. Here, the C‐terminal OH‐groups form hydrogen bonds to the residues i‐3, in part mediated by water molecules. This makes Z‐(Aib)₁₀‐OH an Aib‐homopeptide with three complete 3₁₀‐helical turns in spite of the shorter length it has compared with Z‐(Aib)₁₁‐OtBu, the only homopeptide to date with three complete turns.     

Identification and Biological Activities of Long‐Chain Peptaibols Produced by a Marine‐Derived Strain of Trichoderma longibrachiatum

Six long‐chain peptaibols, 1  –  6 , were identified from agar cultures of a marine‐derived Trichoderma longibrachiatum Rifai strain (MMS151) isolated from blue mussels. The structure elucidation was carried out using electrospray ionization ion trap mass spectrometry (ESI‐IT‐MS) and GC/EI‐MS. The long‐chain peptaibols exhibited the general building scheme Ac‐Aib‐Ala‐Aib‐Ala‐Aib‐XXX‐Gln‐Aib‐Vxx‐Aib‐Gly‐XXX‐Aib‐Pro‐Vxx‐Aib‐XXX‐Gln‐Gln‐Pheol and were similar or identical to recurrent 20‐residue peptaibols produced by Trichoderma spp. Three new sequences were identified and were called longibrachins A‐0, A‐II‐a, and A‐IV‐b. The isolated peptaibols were assayed for cytotoxic, antibacterial, and antifungal activities, and acute toxicity on Dipteran larvae.     

Right‐ and left‐handed three‐helix proteins. II. Similarity and differences in mechanical unfolding of proteins

Here, we study mechanical properties of eight 3‐helix proteins (four right‐handed and four left‐handed ones), which are similar in size under stretching at a constant speed and at a constant force on the atomic level using molecular dynamics simulations. The analysis of 256 trajectories from molecular dynamics simulations with explicit water showed that the right‐handed three‐helix domains are more mechanically resistant than the left‐handed domains. Such results are observed at different extension velocities studied (192 trajectories obtained at the following conditions: v = 0.1, 0.05, and 0.01 Å ps^?1, T = 300 K) and under constant stretching force (64 trajectories, F = 800 pN, T = 300 K). We can explain this by the fact, at least in part, that the right‐handed domains have a larger number of contacts per residue and the radius of cross section than the left‐handed domains. Proteins 2014; 82:90–102. © 2013 Wiley Periodicals, Inc.     

X-Pro peptides: Solution and solid-state conformation of benzyloxycarbonyl-(Aib-Pro)2methyl ester,a type I β-turn

The synthesis of the tetrapeptide benzyloxycarbonyl(α-aminoisobutyryl-L -prolyl)₂-methyl ester (Z-(Aib-Pro)₂-OMe) and an analysis of its conformation in solution and the solid state are reported. Stepwise synthesis using dicyclohexylcarbodiimide leads to racemization at Pro(2). Evidence for the presence of diastereomeric tetrapeptides is obtained from 270-MHz¹H-nmr and 67.89-MHz ¹³C-nmr. The all-L tetrapeptide is obtained by fractional crystallization from ethyl acetate. The NH of Aib(3) is shown to be involved in an intramo-lecular hydrogen bond by variable-temperature ¹H-nmr and the solvent dependence of NH chemical shifts. The results are consistent with a β-turn conformation with Aib(1) and Pro(2) at the corners stabilized by a 4 → 1 hydrogen bond. The molecule crystallizes in the space group P2₁2₁2₁, with a = 8.839, b = 14.938, and c = 22.015 Å. The structure has been refined to an R value of 0.051. The peptide backbone is all-trans, and a 4 → 1 hydrogen bond, between the CO group of the urethane moiety and Aib(3) NH, is observed. Aib(1) and Pro(2) occupy the corner positions of a type I β-turn with ? = ?55.4°, Ψ = ?31.3° for Aib(1) and ? = ?71.6°, Ψ = ?38° for Pro(2). The tertiary amide unit linking Pro(2) and Aib(3) is significantly distorted from planarity (Δω = 14.3°).     

Structure of the hypothetical protein Ton 1535 from Thermococcus onnurineus NA1 reveals unique structural properties by a left‐handed helical turn in normal α‐solenoid protein

The crystal structure of Ton1535, a hypothetical protein from Thermococcus onnurineus NA1, was determined at 2.3 Å resolution. With two antiparallel α‐helices in a helix‐turn‐helix motif as a repeating unit, Ton1535 consists of right‐handed coiled N‐ and C‐terminal regions that are stacked together using helix bundles containing a left‐handed helical turn. One left‐handed helical turn in the right‐handed coiled structure produces two unique structural properties. One is the presence of separated concave grooves rather than one continuous concave groove, and the other is the contribution of α‐helices on the convex surfaces of the N‐terminal region to the extended surface of the concave groove of the C‐terminal region and vice versa. Proteins 2014; 82:1072–1078. © 2013 Wiley Periodicals, Inc.     

One‐pot synthesis of (R)‐1‐(pyridin‐4‐yl)ethyl acetate using tandem catalyst prepared by co‐immobilization of palladium and lipase on mesoporous foam: Optimization and kinetic modeling

The synthesis of (R )‐1‐(pyridin‐4‐yl)ethyl acetate was achieved over tandem palladium‐lipase catalyst with 100% selectivity using 4‐acetyl pyridine as a reactant. The 2% w /w palladium and lipase catalyst was successfully co‐immobilized in the microenvironment of the mesocellular foam and characterized by various techniques. The palladium metal from catalyst hydrogenated 4‐acetyl pyridine to form 1‐(pyridin‐4‐yl)ethanol. The generated intermediate product then underwent kinetic resolution over lipase and selectively gave (R )‐1‐(pyridin‐4‐ yl)ethyl acetate. The catalytic conditions were then studied for optimal performance of both steps. The reaction conditions were optimized to 50 °C and toluene as a solvent. Both chemical and enzymatic kinetic models of the reaction were developed for a given set of reaction conditions and kinetic parameters were predicted. At optimal conditions, the obtained selectivity of intermediate (1‐(pyridin‐4‐yl)ethanol) was 51.38%. The final product yield of ((R )‐1‐(pyridin‐4‐yl)ethyl acetate) was 48.62%.