Structural and thermodynamic properties of rice starches with different genetic background Part 2. Defectiveness of different supramolecular structures in starch granules

High-sensitivity differential scanning microcalorimetry (HSDSC), small-angle X-ray scattering (SAXS), light (LM) and scanning electronic (SEM) microscopy techniques were used to study the defectiveness of different supramolecular structures in starches extracted from 11 Thai cultivars of rice differing in level of amylose and amylopectin defects in starch crystalline lamellae. Despite differences in chain-length distribution of amylopectin macromolecules and amylose level in starches, the invariance in the sizes of crystalline lamellae, amylopectin clusters and granules was established. The combined analysis of DSC, SAXS, LM and SEM data for native starches, as well as the comparison of the thermodynamic data for native and annealed starches, allowed to determine the structure of defects and the localization of amylose chains in crystalline and amorphous lamellae, defectiveness of lamellae, clusters and granules. It was shown that amylose “tie chains”, amylose–lipid complexes located in crystalline lamellae, defective ends of double helical chains dangling from crystallites inside amorphous lamellae (“dangling” chains), as well as amylopectin chains with DP 6–12 and 25–36 could be considered as defects. Their accumulation can lead to a formation of remnant granules. The changes observed in the structure of amylopectin chains and amylose content in starches are reflected in the interconnected alterations of structural organization on the lamellar, cluster and granule levels.     

Structural parameters of amylopectin clusters and semi-crystalline growth rings in wheat starches with different amylose content

Small-angle X-ray scattering (SAXS) and scanning electron microscopy (SEM) were used to investigate the internal structure of wheat starch granules with different amylose content. Different approaches were used for treatment (interpretation) of SAXS data to assess the values of structural parameters of amylopectin clusters and the size of crystalline and amorphous lamella in different wheat starches. The average values of the semi-crystalline growth rings thickness in starches have been determined and the relationship between structural characteristics and thermodynamic melting parameters is discussed.     

Structure function relationships of transgenic starches with engineered phosphate substitution and starch branching

Potato tuber starch was genetically engineered in the plant by the simultaneous antisense suppression of the starch branching enzyme (SBE) I and II isoforms. Starch prepared from 12 independent lines and three control lines were characterised with respect to structural and physical properties. The lengths of the amylopectin unit chains, the concentrations of amylose and monoesterified phosphate were significantly increased in the transgenically engineered starches. Size exclusion chromatography with refractive index detection (SEC-RI) indicated a minor decrease in apparent molecular size of the amylose and the less branched amylopectin fractions. Differential scanning calorimetry (DSC) revealed significantly higher peak temperatures for gelatinisation and retrogradation of the genetically engineered starches whereas the enthalpies of gelatinisation were lower. Aqueous gels prepared from the transgenic starches showed increased gel elasticity and viscosity. Principle component analysis (PCA) of the data set discriminated the control lines from the transgenic lines and revealed a high correlation between phosphate concentration and amylopectin unit chain length. The PCA also indicated that the rheological characteristics were primarily influenced by the amylose concentration. The phosphate and the amylopectin unit chain lengths had influenced primarily the pasting and rheological properties of the starch gels.     

Origin of defects in assembled supramolecular structures of sweet potato starches with different amylopectin chain-length distribution

A combined approach of fluorophore-assisted capillary electrophoresis (FACEL), high-sensitivity differential scanning calorimetry (DSC), wide-angle X-ray scattering (WAXS), small-angle X-ray scattering (SAXS), and light (LM) and scanning electron microscopy (SEM) was applied to study the effects of changes in amylopectin chain-length distribution on the assembly structures of sweet potato starches with similar amylose levels. It was shown that unlike ordinary sweet potato starch, starch extracted from Quick Sweet cultivar of sweet potato had anomalous high level of amylopectin chains with a degree of polymerization (DP) 6–12. Joint analysis of the obtained data revealed that amylopectin chains with DP 10–24 are, apparently, the dominant material for the formation of supramolecular structures in starch granules. In contrast, amylopectin chains with DP < 10 facilitated the formation of defects within crystalline lamellae. An increase in relative content of amylopectin chains with DP < 10 is accompanied by the correlated structural alterations manifested at all levels of starch granule organization (crystalline lamellae, amylopectin clusters, semi-crystalline growth rings, and granule morphology). Thus, the short amylopectin chains with DP < 10 were considered as an origin of the defectiveness in starch supramolecular structures.     

Structural and thermodynamic properties of rice starches with different genetic background Part 1. Differentiation of amylopectin and amylose defects

A combined DSC - HPAEC-PAD approach, gel permeation chromatography and mild long-term acidic hydrolysis were employed to study the effects of amylopectin chain-length distributional and amylose defects on the assembly structures of amylopectin (crystalline lamellae, amylopectin clusters) in A-type polymorphic starches extracted from 11 Thai cultivars of rice with different amylose level. Joint analysis of the data allowed determining the contributions of different populations of amylopectin chains to the thermodynamic melting parameters of crystalline lamellae. It was shown that amylopectin chains with DP 6-12 and 25or=37 could be related to chains stabilizing these structures. The total effect of amylose and amylopectin defects can be described by means of Thomson-Gibbs' equation. The increase of defects in the assembly structures is accompanied by rise of the rates of acidic hydrolysis of both amorphous and crystalline parts in starches.     

Molecular and morphological aspects of annealing-induced stabilization of starch crystallites

A unique series of potato (mutant) starches with highly different amylopectin/amylose (AP/AM) ratios was annealed in excess water at stepwise increasing temperatures to increase the starch melting (or gelatinization) temperatures in aqueous suspensions. Small-angle X-ray scattering (SAXS) experiments revealed that the lamellar starch crystals gain stability upon annealing via thickening for high-AM starch, whereas the crystal surface energy decreases for AM-free starch. In starches with intermediate AP/AM ratio, both mechanisms occur, but the surface energy reduction mechanism prevails. Crystal thickening seems to be associated with the cocrystallization of AM with AP, leading to very disordered nanomorphologies for which a new SAXS data interpretation scheme needed to be developed. Annealing affects neither the crystal internal structure nor the spherulitic morphology on a micrometer length scale.     

Rate studies of the amylose–iodine reaction in unfractionated starch samples of various plant origin

The initial rate of the fast reaction among amylose, iodine, and iodide ions was studied in unfractionated corn, potato, rice, wheat, and arrowroot starches. It was found that the reaction followed the same rate equation as the one established in a previous study using pure amylose fractions containing no amylopectin. There were significant differences, however, among the rate constants of the various starches investigated. These variations were explained in terms of the different average molecular weights of the amylose fractions of these starches. Since whole potato starch indicated a rate constant well within the fange of those of pure amylose fraction (obtained from the same potato starch samples), it was concluded, that amylopectin did not interfere significantly with the rate of the complexation reaction.     

Preparation and characterization of new and improved soluble-starches, -amylose, and -amylopectin by reaction with benzaldehyde/zinc chloride

Seven different starches from potato, rice, maize, waxymaize, amylomaize-VII, shoti, and tapioca, and potato amylose and potato amylopectin have been reacted with benzaldehyde, catalyzed by ZnCl₂, to give new water-soluble starches and water soluble-amylose and soluble-amylopectin. In contrast to the native starches, aqueous solutions of the modified starches could not be precipitated with 2-, 3-, or 4-volumes of ethanol. β-Amylase gave no reaction with the modified starches, in contrast to the native starches, indicating that the modification occurred exclusively at the nonreducing-ends, giving 4,6-benzylidene-d-glucopyranose at the nonreducing-ends. Reactions of α-amylase with native and modified potato and rice starches gave a decrease in the triiodide blue color and an increase in the reducing-value that were similar for the native- and modified-starches, indicating the modified starches had not been significantly altered by the modification. The benzaldehyde-modified starches and benzaldehyde-modified potato amylose and potato amylopectin components, therefore, have a starch structure very much like their native counterparts, in contrast to the Lintner, Small, and the alcohol/acid-hydrolyzed soluble-starches that have undergone acid hydrolysis. The benzaldehyde-modified starches and starch components have significantly higher water solubility than their native counterparts even though the structures of the modified starches had only been slightly altered from the structures of their native counterparts. They all gave crystal-clear solutions that did not retrograde.     

Genotype-specific spatial distribution of starch molecules in the starch granule: a combined CLSM and SEM approach

Starch granule types from a variety of botanical sources were selected to represent differences in crystalline polymorph, amylose and phosphate content, and amylopectin chain length distribution. Equimolar labeling of starch molecules with the fluorophore 8-amino-1,3,6-pyrenetrisulfonic acid (APTS) was used to construct a detailed map of the distribution of amylose and amylopectin within the granule by confocal laser scanning microscopy (CLSM) analysis. Medium- and high-resolution scanning electron microscopy (SEM) were used to provide detailed images of granule surface structures. By using a combined surface and internal imaging approach, interpretations of a number of previous structural observations is presented. In particular, internal images of high amylose maize and potato suggest that multiple initiations of new granules are responsible for the compound or elongated structures observed in these starches. CLSM optical sections of rice granules revealed an apparent altered distribution of amylose in relation to the proposed growth ring structure, hinting at a novel mechanism of starch molecule deposition. Well-described granule features, such as equatorial grooves, channels, cracks, and growth rings were documented and related to both the internal and external observations. A new method for probing the phosphate distribution in native granules was developed using a phosphate-binding fluorescent dye and CLSM.     

Effect of acid–alcohol treatment on the molecular structure and physicochemical properties of maize and potato starches

The molecular structure and physicochemical properties of acid–alcohol treated maize and potato starches (0.36% HCl in methanol at 25 °C for 1–15 days) were investigated. The yields of the modified starches were ranging from 91 to 100%. The average granule size of modified starches decreased slightly. The solubility of starches increased with the increase of treatment time, and the pasting properties confirmed the high solubility of modified starches. The gelatinization temperatures and range of gelatinization increased with the increase of treatment time except T_o (onset temperature) of maize starch. Molecular structures of modified starches suggested the degradation of starches occurred mostly within the first 5 days of treatment, and degradation rate of potato starch was higher than maize starch both in amylopectin and in amylose. Maize starch was found less susceptible to acid–alcohol degradation than potato starch.     

Physico-chemical and degradative properties of in-planta re-structured potato starch

Starch re-structured directly in potato tubers by antisense suppression of starch branching enzyme (SBE), granule bound starch synthase (GBSS) or glucan water dikinase (GWD) genes was studied with the aim at disclosing the effects on resulting physico-chemical and enzyme degradative properties. The starches were selected to provide a combined system with specific and extensive alterations in amylose and covalently esterified glucose-6-phosphate (G6P) contents. As an effect of the altered chemical composition of the starches their hydrothermal characteristics varied significantly. Despite of the extreme alterations in phosphate content, the amylose content had a major affect on swelling power, enthalpy for starch gelatinization and pasting parameters as assessed by Rapid Visco Analysis (RVA). However, a combined influence of the starch phosphate and long glucan chains as represented by high amylose or long amylopectin chain length was indicated by their positive correlation to the final viscosity and set back (RVA) demonstrating the formation of a highly hydrated and gel-forming system during re-structuring of the starch pastes. Clear inverse correlations between glucoamylase-catalyzed digestibility and amylopectin chain length and starch phosphate and lack of such correlation with amylose content indicates a combined structuring role of the phosphate groups and amylopectin chains on the starch glucan matrix.     

A comparative study of edible canna (Canna edulis) starch from different cultivars. Part II. Molecular structure of amylose and amylopectin

Molecular structures of starches isolated from Japanese-green, Thai-green and Thai-purple cultivars of edible canna (Canna edulis Ker) were investigated. The absolute amylose content ranged from 19 to 25%. Degrees of polymerization (DPn) values of amylose determined by fluorescence-labeling method were 1590 for Thai-purple, 1620 for Japanese-green and 1650 for Thai-green cultivars. Mole% of branched fraction of amyloses from edible canna starches examined by a HPLC system after β-amylolysis of labeled amyloses was 13–16%. Branch chain-length distributions of amylopectin analyzed by HPSEC after debranching with isoamylase, followed by fluorescence-labeling of unit chain, showed bimodal distribution with the DPn range of 25–28. The amylopectin of edible canna starches contained high amounts of organic phosphorus (391–420 ppm). The distribution profile of phosphorylated chains, separated from non-phosphorylated chains by DEAE-Sephadex A-50 chromatography, indicated that the phosphate groups were located mostly in long B-chains of amylopectin molecules.     

Origins of B-type crystallinity in glycerol-plasticised, compression-moulded potato starches

The amount of B-type crystallinity in compression-moulded, glycerol-plasticised potato starches was strongly dependent on both the properties of the potato starch used and the applied processing conditions. The presence of amylose and the morphology of the potato starch used, but also processing parameters such as moulding temperature and water content during moulding affected the amount of B-type crystallinity in the materials and thus the ultimate mechanical properties of the plasticised starches. This indicated that the direct relation between composition and physical properties of processed starches is not always valid; processing parameters are important tools for controlling the physical properties of processed starches as they influence the amount of B-type crystallinity in the material. It was shown that the total amount of B-type crystallinity in the glycerol-plasticised potato starches should be considered as a summation of residual amylopectin crystallinity and recrystallisation of both amylose and amylopectin, being strongly dependent on the applied processing conditions. In order to explain the observed amount of B-type crystallinity in these starches, partial (co-)crystallisation of both amylose and amylopectin should occur at high moulding temperatures. The measured mechanical properties of the plasticised potato starches correlated well with the amount of B-type crystallinity observed in the materials.     

Improving starch for food and industrial applications

Progress in understanding starch biosynthesis, and the isolation of many of the genes involved in this process, has enabled the genetic modification of crops in a rational manner to produce novel starches with improved functionality. For example, potato starches have been created that contain unprecedented levels of amylose and phosphate. Amylose-free short-chain amylopectin starches have also been developed; these starches have excellent freeze-thaw stability without the need for chemical modification. These developments highlight the potential to create even more modified starches in the future.     

Gelatinization of starch in excess water: beyond the melting of lamellar crystallites. A combined wide- and small-angle X-ray scattering study

The gelatinization of waxy rice, regular rice, and potato starch suspensions (66% w/w moisture) was investigated by real-time small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) during heating and by fast ramp differential scanning calorimetry (DSC). The high-angle tail of the SAXS patterns suggested the transition from surface to mass fractal structures in the DSC gelatinization range. Amylose plays a major role in determining the dimensions of the self-similar structures that develop during this process as the characteristic power-law scattering behavior extends to lower scattering angles for regular than for waxy starches. Crystallinity of A-type starches is lost in the temperature region roughly corresponding to the DSC gelatinization range. At the end of the gelatinization endotherm, the B-type potato starch showed residual crystallinity (WAXD), while SAXS-patterns exhibited features of remaining lamellar stacks. Results indicate that the melting of amylopectin crystallites during gelatinization is accompanied by the (exothermic) formation of amorphous networks.     

Determination of the maximum water solubility of eight native starches and the solubility of their acidic-methanol and -ethanol modified analogues

The maximum water solubilities of eight native starches from potato, shoti, tapioca, maize, waxy maize, amylomaize-7, wheat, and rice and their acid-methanol and acid-ethanol modified analogues have been determined. Maximum solubilities of 18.7 and 17.4 mg/mL were obtained for waxy maize and tapioca and 12.4 mg/mL for potato and maize starches by autoclaving 220 mg/10 mL at 121 degrees C; 8.7 mg/mL was obtained for shoti starch by stirring in 85:15 (v/v) Me(2)SO-H(2)O at 20 degrees C; and 7.0 and 5.2mg/mL for rice and amylomaize-7 starches by stirring in 1M NaOH at 20 degrees C. The acid-alcohol treated starches were 4-9 times more soluble than their native starches. The compositions of the solubilized starches had, in general, much higher ratios of amylose to amylopectin than the ratios in their native granules. A major exception to this was the acid-methanol treated potato, shoti, and rice starches that had much lower ratios of amylose to amylopectin than the ratios in their granules.     

Annealing of normal and mutant wheat starches. LM, SEM, DSC, and SAXS studies

Structure and thermodynamic properties of native and annealed wheat starches with different amylose content (from 1.5% to 39.5%) have been studied by high-sensitivity differential scanning microcalorimetry (HSDSC), small-angle X-ray diffraction (SAXS), light (LM), and scanning electron microscopy (SEM). Starch morphology, the values of the melting cooperative unit, the thickness of crystalline lamellae and the size of amylopectin clusters as well as thermodynamic parameters characterizing surface of the face side in starch crystals were determined. Some suppositions based on different physical approaches are used for a discussion of the results concerning structural reorganization of starches on different levels of macromolecular organization.     

Structural characterization of wheat starch granules differing in amylose content and functional characteristics

Small-angle X-ray scattering (SAXS) together with several complementary techniques, such as differential scanning calorimetry and X-ray diffraction, have been employed to investigate the structural features that give diverse functional properties to wheat starches (Triticum aestivum L.) within a narrow range of enriched amylose content (36–43%). For these starches, which come from a heterogeneous genetic background, SAXS analysis of duplicate samples enabled structural information to be obtained about their lamellar architecture where differences in lamellar spacing among samples were only several tenths of nanometer. The SAXS analysis of these wheat starches with increased amylose content has shown that amylose accumulates in both crystalline and amorphous parts of the lamella. Using waxy starch as a distinctive comparison with the other samples confirmed a general trend of increasing amylose content being linked with the accumulation of defects within crystalline lamellae. We conclude that amylose content directly influences the architecture of semi-crystalline lamellae, whereas thermodynamic and functional properties are brought about by the interplay of amylose content and amylopectin architecture.     

Retrograded starches as potential anodes in lithium-ion rechargeable batteries

Retrograded starch is a crystal formed by starch molecules with hydrogen bonds. Many literatures have reported its physicochemical character, but its crystal structure is so far unclear. As we isolate amylose and amylopectin from retrograded maize, sweet potato and potato starches in 4.0M KOH solutions and make them retrograde alone in neutral solution (adjusted by HCl) to form crystal, a new phenomenon appears, crystals of KCl do not appear in retrograded potato amylose, potato amylopectin, and maize amylose, indicating that those crystals may absorb K(+) and (or) Cl(-), and those ions probably act with aldehyde of starch or hydroxy of fatty acid attached in starch, such characteristic may make retrograded starches replace graphite as anode with high-capacity in lithium-ion rechargeable batteries.     

Molecular fractionation of starch by density-gradient ultracentrifugation

Amylose and amylopectin in corn and potato starches were fractionated by centrifugation at 124,000g for 3-72 h at 40 degrees C in a gradient media, Nycodenz, based on their sedimentation rate differences. The fractions were collected from a centrifuge tube, and then analyzed by the phenol-sulfuric acid method and iodine-binding test. Amylopectin, a large and highly branched starch molecule, migrated faster than amylose and quickly reached its isopycnic point with a buoyant density of about 1.25 g/mL, exhibiting a sharp and stable carbohydrate peak. Amylose, which is a relatively small and linear molecule, however, migrated slowly in a broad density range and continued moving to higher density regions, eventually overlapping with amylopectin peak as the centrifugation continued. This could indicate that the buoyant density of amylose is similar to that of amylopectin. Under centrifugal conditions of 3 h and 124,000g, amylose and amylopectin molecules were clearly separated, and the presence of intermediate starch molecules (11.5 and 7.7% for corn and potato starch, respectively) was also observed between amylose and amylopectin fractions. The amylose content of corn and potato starches was 22.6 and 21.1%, respectively, based on the total carbohydrate analysis after the ultracentrifugation for 3 h. In alkaline gradients (pH 11 or 12.5), the sedimentation rate of starch molecules and the buoyant density of amylopectin were reduced, possibly due to the structural changes induced by alkali.