Phycoremediation coupled production of algal biomass,harvesting and anaerobic digestion: Possibilities and challenges

Biogas produced from anaerobic digestion is a versatile and environment friendly fuel which traditionally utilizes cattle dung as the substrate. In the recent years, owing to its high content of biodegradable compounds, algal biomass has emerged as a potential feedstock for biogas production. Moreover, the ability of algae to treat wastewater and fix CO₂ from waste gas streams makes it an environmental friendly and economically feasible feedstock. The present review focuses on the possibility of utilizing wastewater as the nutrient and waste gases as the CO₂ source for algal biomass production and subsequent biogas generation. Studies describing the various harvesting methods of algal biomass as well as its anaerobic digestion have been compiled and discussed. Studies targeting the most recent advancements on biogas enrichment by algae have been discussed. Apart from highlighting the various advantages of utilizing algal biomass for biogas production, limitations of the process such as cell wall resistivity towards digestion and inhibitions caused due to ammonia toxicity and the possible strategies for overcoming the same have been reviewed. The studies compiled in the present review indicate that if the challenges posed in translating the lab scale studies on phycoremediation and biogas production to pilot scale are overcome, algal biogas could become the sustainable and economically feasible source of renewable energy.     

Toxicity and bioremediation of As(III) and As(V) in the green microalgae Botryococcus braunii: A laboratory study

Worldwide threats of fuel shortages in the near future and climate change because of greenhouse gas emissions are posing severe challenges and therefore it is vital to search for sustainable ways of preventing the consequences. The dual use of microalgae for phycoremediation and biomass production for sustainable biofuel production is a viable choice. Phycoremediation of As(III) and As(V) ions using microalgae was investigated in a two-staged batch reactor. Accumulation and toxicity of inorganic arsenic forms (As(III) and As(V)) to green microalgae Botryococcus braunii depend on environmental factors. Dissolved oxygen and pH cycles did not significantly differ due to the absence or presence of arsenic (either As(III) or As(V)) ions in the culture. Monod model was utilized for representing the growth kinetics of microalgae in pure media containing various concentrations of nitrate ions. Maximum specific growth rate and saturation constant were found to be 0.14788 d^?1 and 0.00105 g/L, respectively. With the increase in concentration of phosphate in growth medium, the growth of microalgae increased. Media with NaCl (1.0 g/L) and NaHCO₃ (1 g/L) resulted in higher maximum biomass concentration. Effect of coexisting ions on phycoremediation of As(III) and As(V) ions using microalgae was studied.     

Integration of microalgal cultivation system for wastewater remediation and sustainable biomass production

Untreated wastewaters have been a great concern and can cause major pollution problems for environment. Conventional approaches for treating wastewater involve tremendous capital cost, have major short comings and are not sustainable. Microalgae culture offers an interesting step for wastewater treatment. Microalgae serve the dual purpose of phycoremediation along with the production of potentially valuable biomass, which can be used for several purposes. The ability of microalgae to accumulate nitrogen, phosphorus, heavy metals and other toxic compounds can be integrated with wastewater treatment system to offer an elegant solution towards tertiary and quaternary treatment. The current review explores possible role of microalgal based wastewater treatment and explores the current progress, key challenges, limitations and future prospects with special emphasis on strategies involved in harvesting, boosting biomass and lipid yield.     

Nanotechnology and chemical engineering as a tool to bioprocess microalgae for its applications in therapeutics and bioresource management

Abstract

Microalgae are a dynamic biological resource with various biotechnological applications. During recent times, the scope of this application has expanded to include: nutritional health foods, pharmaceuticals, agricultural and industrial products, environmental remediation and bioenergy production. At the same time, the methods and technologies to bioprocess microalgae for the intended applications have also evolved. However, there are still significant developments needed to reach the full potential of microalgae. The presented review discusses current methodologies to improve the effectiveness of algal feedstocks by bioprocessing them innovatively with cost-effective and environmentally sustainable techniques for their applications in therapeutics and bioresource management. The first section discusses the diversity of microalgae and its applications. In following sections, bioprocessing microalgae for their applications in therapeutics focusing on the efficacy of algae-mediated metallic nanoparticles against microbial infections and cancer is discussed. In addition, a discussion on bioresource management to produce value-added products for bioenergy and bioresource conservation elaborated the potential of microalgae as a biological reservoir to resolve the energy crisis for the modern world.     

In vitro culture and conservation of microalgae: Applications for aquaculture, biotechnology and environmental research

Summary Microalgae are a highly diverse group of unicellular organisms comprising the eukaryotic protists and the prokaryotic cyanobacteria or blue-green algae. The microalgae have a unique environmental status; being virtually ubiquitous in euphotic aquatic niches, they can occupy extreme habitats ranging from tropical coral reefs to the polar regions, and they contribute to half of the globe’s photosynthetic activity. Furthermore, they form the basis of the food chain for more than 70% of the world’s biomass. Microalgae are a valuable environmental and biotechnological resource, and the aim of this review is to explore the use of in vitro technologies in the conservation and sustainable exploitation of this remarkable group of organisms. The first part of the review evaluates the importance of in vitro methods in the maintenance and conservation of microalgae and describes the central role of culture collections in applied algal research. The second part explores the application of microalgal in vitro technologies, particularly in the context of the aquaculture and biotechnology industries. Emphasis is placed upon the exploitation of economically important algal products including aquaculture feed, biomass production for the health care sector, green fertilizers, pigments, vitamins, antioxidants, and antimicrobial agents. The contribution that microalgae can make to environmental research is also appraised; for example, they have an important role as indicator organisms in environmental impact assessments. Similarly, designated culture collection strains of microalgae are used for ecotoxicity testing. Throughout the review, emphasis is placed on the application of in vitro techniques for the continued advancement of microalgal research. The paper concludes by assessing future perspectives for the novel application of microalgae and their products.     

Phycoremediation of Tannery Wastewater Using Microalgae Scenedesmus Species

A number of microalgae species are efficient in removing toxicants from wastewater. Many of these potential species are a promising, eco-friendly, and sustainable option for tertiary wastewater treatment with a possible advantage of improving the economics of microalgae cultivation for biofuel production. The present study deals with the phycoremediation of tannery wastewater (TWW) using Scenedesmus sp. isolated from a local habitat. The test species was grown in TWW under laboratory conditions and harvested on the 12th day. The results revealed that the algal biomass during the growth period not only reduced the pollution load of heavy metals (Cr-81.2–96%, Cu-73.2–98%, Pb-75–98% and Zn-65–98%) but also the nutrients (NO₃ >44.3% and PO₄ >95%). Fourier Transform Infrared (FTIR) spectrums of Scenedesmus sp. biomass revealed the involvement of hydroxyl amino, carboxylic and carbonyl groups. The scanning electron micrograph (SEM) and Energy Dispersive X-ray Spectroscopic analysis (EDS) revealed the surface texture, morphology and element distribution of the biosorbent. Furthermore, the wastewater generated during wet-blue tanning process can support dense population of Scenedesmus sp., making it a potential growth medium for biomass production of the test alga for phycoremediation of toxicants in tannery wastewaters.     

Nutrient removal and biomass production: advances in microalgal biotechnology for wastewater treatment

Owing to certain drawbacks, such as energy-intensive operations in conventional modes of wastewater treatment (WWT), there has been an extensive search for alternative strategies in treatment technology. Biological modes for treating wastewaters are one of the finest technologies in terms of economy and efficiency. An integrated biological approach with chemical flocculation is being conventionally practiced in several-sewage and effluent treatment plants around the world. Overwhelming responsiveness to treat wastewaters especially by using microalgae is due to their simplest photosynthetic mechanism and ease of acclimation to various habitats. Microalgal technology, also known as phycoremediation, has been in use for WWT since 1950s. Various strategies for the cultivation of microalgae in WWT systems are evolving faster. However, the availability of innovative approaches for maximizing the treatment efficiency, coupled with biomass productivity, remains the major bottleneck for commercialization of microalgal technology. Investment costs and invasive parameters also delimit the use of microalgae in WWT. This review critically discusses the merits and demerits of microalgal cultivation strategies recently developed for maximum pollutant removal as well as biomass productivity. Also, the potential of algal biofilm technology in pollutant removal, and harvesting the microalgal biomass using different techniques have been highlighted. Finally, an economic assessment of the currently available methods has been made to validate microalgal cultivation in wastewater at the commercial level.     

Sustainable production of eicosapentaenoic acid-rich oil from microalgae: Towards an algal biorefinery

Utilization of sustainable natural resources such as microalgae has been considered for the production of biofuels, aquaculture feed, high-value bioactives such as omega-3 fatty acids, carotenoids, etc. Eicosapentaenoic acid (EPA) is an omega-3 fatty acid present in fish oil, which is of physiological importance to both humans and fish. Marine microalgae are sustainable sources of lipid rich in EPA, and different species have been explored for the production of EPA as a single product. There has been a rising interest in the concept of a multi-product biorefinery, focusing on the maximum valorization of the algal biomass. Targeting one or more value-added compounds in a biorefinery scenario can improve the commercial viability of low-value products such as triglycerides for biofuel. This approach has been viewed by technologists and experts as a sustainable and economically feasible possibility for the large-scale production of microalgae for its potential applications in biodiesel and jet fuel production, nutraceuticals, animal and aquaculture feeds, etc. In this review paper, we describe the recent developments in the production of high-value EPA-rich oil from microalgae, emphasizing the upstream and downstream bioprocess techniques, and the advantages of considering an EPA-rich oil-based biorefinery.     

Strategies to enhance production of microalgal biomass and lipids for biofuel feedstock

ABSTRACT

Microalgae have enormous potential as feedstock for biofuel production compared with other sources, due to their high areal productivity, relatively low environmental impact, and low impact on food security. However, high production costs are the major limitation for commercialization of algal biofuels. Strategies to maximize biomass and lipid production are crucial for improving the economics of using microalgae for biofuels. Selection of suitable algal strains, preferably from indigenous habitats, and further improvement of those ‘platform strains’ using mutagenesis and genetic engineering approaches are desirable. Conventional approaches to improve biomass and lipid productivity of microalgae mainly involve manipulation of nutritional (e.g. nitrogen and phosphorus) and environmental (e.g. temperature, light and salinity) factors. Approaches such as the addition of phytohormones, genetic and metabolic engineering, and co-cultivation of microalgae with yeasts and bacteria are more recent strategies to enhance biomass and lipid productivity of microalgae. Improvement in culture systems and the use of a hybrid system (i.e. a combination of open ponds and photobioreactors) is another strategy to optimize algal biomass and lipid production. In addition, the use of low-cost substrates such as agri-industrial wastewater for the cultivation of microalgae will be a smart strategy to reduce production costs. Such systems not only generate high algal biomass and lipid productivity, but are also useful for bioremediation of wastewater and bioremoval of waste CO₂. The aim of this review is to highlight the advances in the use of various strategies to enhance production of algal biomass and lipids for biofuel feedstock.     

Microalgae: a robust “green bio-bridge” between energy and environment

Microalgae are a potential candidate for biofuel production and environmental treatment because of their specific characteristics (e.g. fast growth, carbon neutral, and rich lipid accumulations). However, several primary bottlenecks still exist in current technologies, including low biomass conversion efficiency, bio-invasion from the external environment, limited or costly nutrient sources, and high energy and capital input for harvest, and stalling its industrial progression. Coupling biofuel production with environmental treatment renders microalgae a more feasible feedstock. This review focuses on microalgae biotechnologies for both bioenergy generation and environmental treatment (e.g. CO₂ sequestration and wastewater reclamation). Different intelligent technologies have been developed, especially during the last decade, to eliminate the bottlenecks, including mixotrophic/heterotrophic cultivation, immobilization, and co-cultivation. It has been realized that any single purpose for the cultivation of microalgae is not an economically feasible option. Combinations of applications in biorefineries are gradually reckoned to be necessary as it provides more economically feasible and environmentally sustainable operations. This presents microalgae as a special niche occupier linking the fields of energy and environmental sciences and technologies. The integrated application of microalgae is also proven by most of the life-cycle analysis studies. This study summarizes the latest development of primary microalgal biotechnologies in the two areas that will bring researchers a comprehensive view towards industrialization with an economic perspective.     

Microalgae biofuel potentials (Review)

With the decrease of fossil based fuels and the environmental impact of them over the planet, it seems necessary to seek the sustainable sources of clean energy. Biofuels, is becoming a worldwide leader in the development of renewable energy resources. It is worthwhile to say that algal biofuel production is thought to help stabilize the concentration of carbon dioxide in the atmosphere and decrease global warming impacts. Also, among algal fuels’ attractive characteristics, algal biodiesel is non toxic, with no sulfur, highly biodegradable and relatively harmless to the environment if spilled. Algae are capable of producing in excess of 30 times more oil per acre than corn and soybean crops. Currently, algal biofuel production has not been commercialized due to high costs associated with production, harvesting and oil extraction but the technology is progressing. Extensive research was conducted to determine the utilization of microalgae as an energy source and make algae oil production commercially viable.     

Microalgae biofuel potentials (review)

With the decrease of fossil based fuels and the environmental impact of them over the planet, it seems necessary to seek the sustainable sources of clean energy. Biofuels, is becoming a worldwide leader in the development of renewable energy resources. It is worthwhile to say that algal biofuel production is thought to help stabilize the concentration of carbon dioxide in the atmosphere and decrease global warming impacts. Also, among algal fuels' attractive characteristics, algal biodiesel is non toxic, with no sulfur, highly biodegradable and relatively harmless to the environment if spilled. Algae are capable of producing in excess of 30 times more oil per acre than corn and soybean crops. Currently, algal biofuel production has not been commercialized due to high costs associated with production, harvesting and oil extraction but the technology is progressing. Extensive research was conducted to determine the utilization of microalgae as an energy source and make algae oil production commercially viable.     

Bioflocculation as an innovative harvesting strategy for microalgae

Microalgae are a promising new source of biomass for the production of third generation biofuels but, so far, the majority of microalgal biomass has been used for high-value applications. New low-cost technologies are needed to make the production and processing of microalgae economically feasible for low-value applications. A major challenge lies in the harvesting of microalgae, which requires a cost-efficient separation technology. Flocculation, especially bioflocculation, is an attractive low-cost separation technology. Various new bioflocculation strategies have been claimed to generate major advances in cost-efficient harvesting. Here, we review the recent advances in bioflocculation based on algal–bacterial, algal–fungal, or algal–algal interactions within the framework of microalgae biomass harvesting for biofuel production. We also discuss recent advances using infochemicals and genetic engineering for the induction of bioflocculation.     

Cultivation of algae and nutrient removal in a waste heat utilization process

A process providing a beneficial use for waste heat and excess nutrients in the cooling waters of nuclear reactors and fossil-fueled power generating plants has been developed. The process involves the cultivation of selected strains of thermotolerant microalgae in heated discharge waters and the subsequent harvesting of the algal biomass for nutrient removal, recovery of energy and fertilizer, and extraction of high value products. The design of such a process is presented for a large cooling reservoir receiving a discharge of 10⁹1^?1 d^?1 of secondary cooling water containing 100 μg 1^?1 of available P and 400 μg 1^?1 of available N. Based on this nutrient load, with a 1% P content in the algal biomass and a productivity of 10 g m^?2 d ^?1, a 100 ha region would be needed for the process. Hydraulic barriers (submerged plastic curtains) would isolate the 100 ha algal production area “cultivation zone” in the influent end of the reservoir to create a hydraulic and thermal environment conductive to the selective growth of filamentous, thermotolerant, nitrogen-fixing, blue-green algae. The algal culture would be inoculated into the thermal plume and harvested near the distal barrier of the cultivation zone with rotating, backwashed, fine mesh screens (“microstrainers”). A portion of the harvested biomass would be recycled to the inoculation site to maintain a dense culture. This process could mitigate both thermal and nutrient loadings on receiving bodies of water.     

Comparative life cycle assessment of autotrophic cultivation of Scenedesmus dimorphus in raceway pond coupled to biodiesel and biogas production

Life cycle assessment (LCA) of indigenous freshwater microalgae, Scenedesmus dimorphus, cultivation in open raceway pond and its conversion to biodiesel and biogas were carried out. The LCA inventory inputs for the biogas scenario was entirely based on primary data obtained from algal cultivation (in pilot scale raceway pond), harvesting, and biogas production; while only the downstream processing involved in biodiesel production namely drying, reaction and purification were based on secondary data. Overall, eight scenarios were modeled for the integrated process involving: algae-based CO₂ capture and downstream processing scenarios for biodiesel and biogas along with impact assessment of nutrient addition and extent of recycling in a life cycle perspective. The LCA results indicated a huge energy deficit and net CO₂ negative in terms of CO₂ capture for both the biodiesel and biogas scenarios, majorly due to lower algal biomass productivity and higher energy requirements for culture mixing. The sensitivity analysis indicated that variability in the biomass productivity has predominant effect on the primary energy demand and global warming potential (GWP, kg CO₂ eq.) followed by specific energy consumption for mixing algal culture. Furthermore, the LCA results indicated that biogas conversion route from microalgae was more energy efficient and sustainable than the biodiesel route. The overall findings of the study suggested that microalgae-mediated CO₂ capture and conversion to biodiesel and biogas production can be energy efficient at higher biomass productivity (> 10 g m⁻² day⁻¹) and via employing energy-efficient systems for culture mixing (< 2 W m⁻³).

     

Bioenergy production and sustainable development: science base for policymaking remains limited

The possibility of using bioenergy as a climate change mitigation measure has sparked a discussion of whether and how bioenergy production contributes to sustainable development. We undertook a systematic review of the scientific literature to illuminate this relationship and found a limited scientific basis for policymaking. Our results indicate that knowledge on the sustainable development impacts of bioenergy production is concentrated in a few well‐studied countries, focuses on environmental and economic impacts, and mostly relates to dedicated agricultural biomass plantations. The scope and methodological approaches in studies differ widely and only a small share of the studies sufficiently reports on context and/or baseline conditions, which makes it difficult to get a general understanding of the attribution of impacts. Nevertheless, we identified regional patterns of positive or negative impacts for all categories – environmental, economic, institutional, social and technological. In general, economic and technological impacts were more frequently reported as positive, while social and environmental impacts were more frequently reported as negative (with the exception of impacts on direct substitution of GHG emission from fossil fuel). More focused and transparent research is needed to validate these patterns and develop a strong science underpinning for establishing policies and governance agreements that prevent/mitigate negative and promote positive impacts from bioenergy production.     

Efficacy of microalgae for industrial wastewater treatment: a review on operating conditions,treatment efficiency and biomass productivity

Sustainable, clean, renewable energy without negotiating contiguous environment is a challenging task mainly comprises of natural resource management which involves operational efficiency, waste minimisation and energy recovery. Disposal of untreated industrial wastewater with chemical nutrients especially compounds containing nitrogen and phosphorous lead to eutrophication and related environmental issues that affect the recycling processes of bio system. Biotransformation of pollutants using microalgae has proven to be proficient and economic method of wastewater treatment due to their adaptability of growing in various wastewater streams and also useful in the process of CO₂ fixation. Moreover this technology has the competence of producing bio fuels as an alternative energy resource in the form of bio diesel, bio ethanol and biogas. In this review paper, the applicability of microalgae cultivation in industrial wastewater treatment has been discussed extensively including the processes involved, influencing operational parameters such as study mode, cultivation mode and time, method of aeration, pH and intensity of light. Further, the cultivation methods, harvesting techniques involved in the treatment process have been presented. In addition, the analysis on removal efficiency of algal treatment, biomass productivity and lipid content of the cultivated biomass has been discussed widely which possibly will be helpful in adopting the process integration in industrial wastewater treatment with bio energy production.     

Phycoremediation of municipal wastewater by microalgae to produce biofuel

Municipal wastewater (WW), if not properly remediated, poses a threat to the environment and human health by carrying significant loads of nutrients and pathogens. These contaminants pollute rivers, lakes, and natural reservoirs where they cause eutrophication and pathogen-mediated diseases. However, the high nutrient content of WW makes it an ideal environment for remediation with microalgae that require high nutrient concentrations for growth and are not susceptible to toxins and pathogens. Given that an appropriate algal strain is used for remediation, the incurred biomass can be refined for the production of biofuel. Four microalgal species (Chlamydomonas reinhardtii, Chlorella sp., Parachlorella kessleri-I, and Nannochloropsis gaditana) were screened for efficient phycoremediation of municipal WW and potential use for biodiesel production. Among the four strains tested, P. kessleri-I showed the highest growth rate and biomass production in 100% WW. It efficiently removed all major nutrients with a removal rate of up to 98% for phosphate after 10 days of growth in 100% municipal WW collected from Delhi. The growth of P. kessleri-I in WW resulted in a 50% increase of biomass and a 115% increase of lipid yield in comparison to growth in control media. The Fatty acid methyl ester (FAME), and fuel properties of lipids isolated from cells grown in WW complied with international standards. The present study provides evidence that the green alga P. kessleri-I effectively remediates municipal WW and can be used to produce biodiesel.     

Engineering microalgae for water phosphorus recovery to close the phosphorus cycle

As a finite and non-renewable resource, phosphorus (P) is essential to all life and crucial for crop growth and food production. The boosted agricultural use and associated loss of P to the aquatic environment are increasing environmental pollution, harming ecosystems, and threatening future global food security. Thus, recovering and reusing P from water bodies is urgently needed to close the P cycle. As a natural, eco-friendly, and sustainable reclamation strategy, microalgae-based biological P recovery is considered a promising solution. However, the low P-accumulation capacity and P-removal efficiency of algal bioreactors restrict its application. Herein, it is demonstrated that manipulating genes involved in cellular P accumulation and signalling could triple the Chlamydomonas P-storage capacity to ~7% of dry biomass, which is the highest P concentration in plants to date. Furthermore, the engineered algae could recover P from wastewater almost three times faster than the unengineered one, which could be directly used as a P fertilizer. Thus, engineering genes involved in cellular P accumulation and signalling in microalgae could be a promising strategy to enhance P uptake and accumulation, which have the potential to accelerate the application of algae for P recovery from the water body and closing the P cycle.     

Mild disintegration methods of microalgae–bacteria flocs from wastewater treatment

The use of microalgae in biological wastewater treatment has been widely studied. However, there is a dearth of information about estimating the microalgae and bacteria concentrations. In order to maintain a stable algal-bacterial system, it is necessary to quantify both the algal and bacterial biomasses. Typically, microalgae and bacteria from flocs in activated sludge contribute to better biomass settleability. However, flocs cause problems when it comes to estimating the individual biomass concentrations of microalgae and bacteria in a symbiotic algae-bacteria aggregate. This study aimed to find the best disintegration treatment with low influence on the viability of the microalgal cell determined by its photosynthetic activity. In the present work, biological (enzyme solution), chemical (formaldehyde), mechanical (glass bead-beating), and physical (sonication) treatments were performed on microalgae–bacteria flocs (ALBA flocs) to disintegrate the community as a pre-treatment step in order to develop a method for estimating the algal and bacterial concentration and to quantify the degree of disintegration. The effectiveness of the methods to disintegrate ALBA flocs in descending order are the following: sonication, bead-beating, formaldehyde and enzyme application. Sonication treatment (40 W, 6 min) showed the best disintegration performance of the microalgal-bacterial flocs, up to 90 % with 17 % loss of the algal photosynthetic activity. Bead-beating (3 mm diameter, 80 s) achieved 80 % of disintegration with only 6 % loss of its photosynthetic activity. These results demonstrate the possibility of mild disintegration of compact ALBA flocs without having any adverse impact on the microalgae cell. After these treatments, it becomes possible to estimate the individual biomass concentrations of algae and bacteria manually such as with a cell-counting chamber.