Interactive biosorption by microalgal biomass as a tool for fluoride removal

Maximum biosorption of Ca²⁺ was at 50 mg Ca²⁺ l^–1 with both Anabaena fertilissima (2.8 mg Ca²⁺ g^–1 dry wt) and Chlorococcum humicola (4.4 mg g^–1). Such Ca²⁺-treated biomasses, accumulated, respectively, 7 mg F g^–1 DW from an aqueous solution of 10 mg F l^–1 and 4.5 mg F g^–1 DW from 15 mg F l^–1. Data for both Ca²⁺ and F^– biosorption fitted the Langmuir adsorption isotherm indicating monolayer adsorption at a constant energy.     

Enhanced colchicine production in root cultures of Gloriosa superba by direct and indirect precursors of the biosynthetic pathway

Excised root cultures of Gloriosa superba reached 7.5 g dry wt l^–1 and accumulated 240±40 g colchicine g^–1 cell dry wt after 4 weeks growth. While all precursors (except trans-cinnamic acid) enhanced colchicine content of root cultures without adversely affecting root growth, treatment with p-coumaric acid + tyramine (each at 20 mg l^–1) increased colchicine content to 1.9 mg g^–1 cell dry wt.     

Induction of astaxanthin formation by reactive oxygen species in mixotrophic culture of Chlorococcum sp.

The induction of astaxanthin formation by reactive oxygen species in mixotrophic culture of Chlorococcum sp. was investigated. H₂O₂ (0.1 mM) enhanced the total astaxanthin formation from 5.8 to 6.5 mg g^–1 cell dry wt. Fe²⁺ (0.5 mM) added to the medium with H₂O₂ (0.1 mM) further promoted astaxanthin formation to 7.1 mg g^–1 cell dry wt. Similarly, Fe²⁺ (0.5 mM) together with methyl viologen (0.01 mM) promoted astaxanthin formation to 6.3 mg g^–1 cell dry wt. In contrast, an addition of KI (1 mM), a specific scavenger for hydroxyl radicals (OH), together with H₂O₂ (0.1 mM) and Fe²⁺ (0.5 mM), to the medium decreased astaxanthin formation to 1.8 mg g^–1 cell dry wt. KI (1 mM) also inhibited the enhancement of carotenogenesis by superoxide anion radicals (O₂ ^–), with a decrease of astaxanthin formation to 1.7 mg g^–1 cell dry wt. This suggested that O₂ ^– might be transformed to OH before promoting carotenogenesis in Chlorococcum sp.     

Screening yeast cells for absorption of selenium oxyanions

Certain yeast cells on solid nutrient medium produced colonies surrounded by a light zone of selenite absorption. This screening procedure resulted in the selection of 22 strains out of 200 isolates with different Se⁴⁺-absorbing capacity ranging from 16 to 98.8 g Se⁴⁺ g^–1 l^–1 h^–1. The highest rate of Se⁴⁺ elimination from the Na₂SeO₃ solution was observed with an oval shaped, cream pigmented fermentative yeast, tentatively called Candida sp. strain MS4. This strain was isolated from wastewater and found to accumulate selenium oxyanions. Se⁴⁺ uptake involved both inactive and active phenomena. The amounts of selenium (initial concentration 2 mg Se⁴⁺ l^–1) removed from aqueous solution by inactive and active phenomena were 667 g Se⁴⁺ g^–1 l^–1, and 1580 g Se⁴⁺ g^–1 l^–1, respectively. The strain also removed selenate inactively (135 g Se⁶⁺ g^–1 l^–1).     

Accumulation of Cd2+ and Pb2+ in the suspension cultures of Agave amaniensis and Costus speciosus and the determination of the culture's growth and phytosteroid content

Cell suspension cultures of Agave amaniensis and Costus speciosus were grown in media containing Cd^{2 +} up to 25 and 20 mg l^–1, respectively, and Pb²⁺ up to 40 mg l^–1. The cultures hyper-accumulated Cd²⁺ up to 900 and 530 g g^–1 and Pb²⁺ up to 1390 and 1170 g g^–1 dry wt. in their respective biomasses. Increasing Pb²⁺ up to 30 mg l^–1 increased the biomass production and total sitosterol content of Costus speciosus by up to 1.7- and 1.3-fold, respectively.     

Metal removal by immobilised and non-immobilised Azolla filiculoides

Milled-sieved and epichlorhydrin-immobilised Azolla biosorbed ca. 363 and 320 mol Cu²⁺ g^–1 from a 100 mg l^–1 solution. Efficiency of Cu²⁺ removal by columns was in the order epichlorohydrin-immobilised Azolla>milled-sieved Azolla>untreated Azolla. The 2.5 g epichlorohydrin-immobilised Azolla column demonstrated complete metal sequestration from ca. 12 l of influent 5 mg Cu²⁺ l^–1 and was still at less than 75% saturation even after ca. 22 l had passed through the column. EDTA effectively desorbed Cu²⁺ with a ca. 55-fold decrease in volume.     

Chromium and aluminum biosorption on<Emphasis Type="Italic"> Chryseomonas luteola</Emphasis> TEM05

Cr(VI) and Al(III) are environmental pollutants that are frequently encountered together in industrial wastewaters, e.g., from mining iron-steel, metal cleaning, plating, metal processing, automobile parts, and the manufacturing and dye industries. In this work, several variables that affect the capacity for chromium and aluminum biosorption by Chryseomonas luteola TEM05 were studied, particularly the effects of pH, metal concentration and contact time. Optimum adsorption pH values of Cr(VI) and Al(III) were determined as 4.0 and 5.0, respectively. The biosorption equilibrium was described by Freundlich and Langmuir adsorption isotherms. The value of Q ^o appears to be significantly higher for the Al(III) C. luteola TEM05 system. Langmuir parameters of C. luteola TEM05 also indicated a maximum adsorption capacity of 55.2 mg g^–1 for Al(III) and 3.0 mg g^–1 for Cr(VI).     

Production of ajmalicine and ajmaline in hairy root cultures of Rauvolfia micrantha Hook f., a rare and endemic medicinal plant

Hairy roots of Rauvolfia micrantha were induced from hypocotyl explants of 2–3 weeks old aseptic seedlings using Agrobacterium rhizogenes ATCC 15834. Hairy roots grown in half-strength Murashige & Skoog (MS) medium with 0.2 mg indole 3-butyric acid l^–1 and 0.1 mg -naphthaleneacetic acid l^–1 produced more ajmaline (0.01 mg g^–1 dry wt) and ajmalicine (0.006 mg g^–1 dry wt) than roots grown in auxin-free medium. Ajmaline (0.003 mg g^–1 dry wt) and ajmalicine (0.0007 mg g^–1 dry wt) were also produced in normal root cultures. This is the first report of production of ajmaline and ajmalicine in hairy root cultures of Rauvolfia micrantha.     

Adsorption of Ni2+ on the surface of molecularly imprinted adsorbent from Penicillium chysogenum mycelium

The adsorption capacity for Ni²⁺ on to the surface molecular imprinting adsorbent on Penicillium chysogenum mycelium (the surface-imprinted adsorbent) was 40–45 mg g^–1 (using 200 mg Ni²⁺ l^–1), two times of the mycelium adsorbent. The surface-imprinted adsorbent had good stability at pH 28. The optimal concentration of EDTA for desorption was 0.1 to 0.5 g l^–1. The surface imprinted adsorbent could be reused 15 times without losing its uptake.     

Influence of inorganic microelements on the production of camptothecin with suspension cultures of <Emphasis Type="Italic">Camptotheca acuminata</Emphasis>

The effects of eight microelements (I^–, BO₃ ^3–, MoO₄ ^2–, Co²⁺, Cu²⁺, Mn²⁺, Fe²⁺, Zn²⁺) on the biosynthesis of camptothecin and the growth of suspension cultures of Camptotheca acuminata were studied. The increase of I^– to 25 M l^–1, Cu²⁺ to 1 M l^–1, Co²⁺ to 2 M l^–1 and MoO₄ ^2– to 10 M l^–1 in Murashige and Skoog (MS) medium resulted in 1.66, 2.84, 2.53 and 2.04 times higher of camptothecin yield than that in standard MS medium respectively. Combined treatment of I^– (25 M l^–1), Cu²⁺ (1 M l^–1), Co²⁺ (2 M l^–1) and MoO₄ ^2– (10 M l^–1) lead to improve cell dry weight, camptothecin content, and camptothecin yield to 30.56 g l^–1, 0.0299%, and 9.15 mg l^–1, respectively, which were 20.2, 208.9 and 273.8% increment respectively when compared with those of control.     

Increased taxane accumulation in callus cultures of Taxus cuspidata and Taxus × media by some elicitors and precursors

In Taxus cuspidata callus, vanadyl sulfate (10 mg l^–1) induced a high (146 g g^–1 dry wt) production of 10-deacetylbaccatin III in comparison to 7 g g^–1 dry wt of the control. The content of paclitaxel in this species increased from 16 g g^–1 to 74 g g^–1 dry wt when 20 mg phenylalanine l^–1 was used. In T. media, p-aminobenzoic acid induced the highest content of 10-deacetylbaccatin III (481 g g^–1 dry wt) versus 181 g g^–1 in the control. Paclitaxel increased from 89 to 139 g g^–1 dry wt after adding chitosan (20 mg l^–1) to the cultures.     

Influence of environmental factors on reductive bioprecipitation of uranium by sulfate reducing bacteria

Microbial reduction of soluble uranyl [U (VI)] to insoluble uraninite by sulfate reducing bacteria (SRB) is a promising remediation strategy for uranium-contaminated groundwater. Effects of environmental factors, including pH and coexisting ions, on U (VI) bioreduction processes (UBP) remain unknown. Anaerobic batch experiments were performed to evaluate impact on UBP. Kinetic investigations with varied pH demonstrated that U (VI) was reduced mostly within 48 h. The bioprecipitation yields depended strongly on pH, increasing from 12.9% to 99.4% at pH 2.0 and 6.0, respectively. Sulfate concentration 4000 mg l⁻¹ did not affect UBP; however, sulfate concentration 5000 mg l⁻¹ significantly slowed UBP. Biogenic H₂S produced during sulfate reduction was not directly involved in UBP. At 20 mg l⁻¹ Zn or 10 mg l⁻¹ Cu, no UBP inhibition was observed and uraninite was detected in metal sulfide precipitate. However, 25 mg l⁻¹ Zn or 15 mg l⁻¹ Cu stopped UBP completely. Cu toxicity mechanism probably differed from Zn. The ability to reduce U (VI) was lost permanently with exposure to 15 mg l⁻¹ Cu, but not for Zn 25 mg l⁻¹. No uraninite could be detected before nitrate removal, suggesting nitrate strongly inhibited UBP, which may possibly be related to denitrification intermediates controlling the solution redox potential.     

Simple strategy for the in vitro conservation of Ipsea malabarica an endemic and endangered orchid of the Western Ghats of Kerala,India

A simple protocol was developed for plantlet regeneration from seedling leaf segments of pigeonpea cultivar ICPL 93115 through shoot organogenesis. Ten-day-old seedlings aseptically grown on MS medium were used for furnishing leaf segments. Initial incubation for 5 days in dark at 25±2 °C followed by transfer to 10/14-h light / dark cycle (12.1 mol photons m^–2 s^–1) favoured regeneration. The decisive role of 6-benzyl adenine at different concentrations was established on shoot organogenesis. Murashige and Skoog's (MS) (1962) medium fortified with BA of 5.0 mg l^–1 was optimum for shoot regeneration and MS + BA of 1.0 mg l^–1 for shoot elongation, while MS + IAA (1.0 mg l^–1) + kinetin (0.1 mg l^–1) showed good results for rooting.     

Arsenic concentrations in water and fish from Chautauqua Lake,New York

Synopsis Arsenic persists in Chautauqua Lake, New York waters 13 years after cessation of herbicide (sodium arsenite) application and continues to cycle within the lake. Arsenic concentrations in lake water ranged from 22.4–114.81 g l^–1, = 49.0 ag l^–1. Well water samples generally contained less than 10 g l^–1 arsenic. Arsenic concentrations in lake water exceeded U.S. Public Health Service recommended maximum concentrations (10 g l^–1) and many samples exceeded the maximum permissible limit (50 g l^–1). Fish accumulated arsenic from water but did not magnify it. Fish to water arsenic ratios ranged from 0.4–41.6. Black crappie (Pomoxis nigromaculatus) contained the highest arsenic concentrations (0.14–2.04 g g^–1 ), X = 0.7 g g^–1) while perch (Perca flavescens), muskellunge (Esox masquinongy) and largemouth bass (Micropterus salmoides) contained the lowest concentrations (0.02–0.13 g g^–1). Arsenic concentrations in fish do not appear to pose a health hazard for human consumers.     

Engineering the Escherichia coli outer membrane protein OmpC for metal bioadsorption

The outer membrane protein, OmpC, from Escherichia coli was used to display metal-binding poly-histidine peptides on the surface of this bacterium. SDS-PAGE analysis of outer membrane protein preparations confirmed the expression of the metal-binding epitopes inserted in position 162 of the mature OmpC protein. Display of these epitopes was confirmed by epifluorescence microscopy of cells bound to Ni²⁺-NTA-agarose beads and metal adsorption experiments. The cells harboring one or two copies of the metal binding epitope were able to adsorb 3 to 6 times more Zn²⁺ (13.8 mol g^–1 cell), Fe³⁺ (35.3 mol g^–1 cell), and Ni²⁺ (9.9 mol g^–1 cell) metallic ions than control cells expressing the wild-type OmpC.     

Enzyme formation by a yeast cell wall lytic Arthrobacter species: formation of α-mannanase

Summary The kinetics of -mannanase (EC 3.2.1.77) and -mannosidase (EC 3.2.1.24) formation by a yeast cell wall lytic Arthrobacter species were studied. Growth () on yeast mannan was multiphasic and caused by mannose (=0.29 h^–1) liberated by enzyme action from mannan. Early enzyme formation was soon repressed by mannose and depressed by its restricted availability during late exponential and stationary growth. Synthesis of -mannosidase occurred predominantly at the late stage of substrate utilization. Fructose was detected as an equally potent inducer for -mannanase formation as yeast mannan, being a simple and cheap substrate for large-scale cultivation. Growth on fructose was reduced (=0.20 h^–1), enzyme synthesis being growth associated; nevertheless, comparable -mannanase levels [180 (U) units l^–1] were formed. -Mannosidase activity was only detectable in small amounts. Continuous culture experiments gave values for maximal productivity of mannanase of 18 U h^–1 g^–1 and enzyme yield per biomass (Y _EA/X) of 100 U g^–1. Moreover, the substrate saturation constant (Monod constant) and maintenance coefficient were estimated for fructose as 115 mg l^–1 and 4 mg h^–1 g^–1, respectively.     

Protein production from whey usingPenicillium cyclopium; growth parameters and cellular composition

Summary The growth parameters ofPenicillium cyclopium have been evaluated in a continuous culture system for the production of fungal protein from whey. Dilution rates varied from 0.05 to 0.20 h^–1 under constant conditions of temperature (28°C) and pH (3.5). The saturation coefficients in the Monod equation were 0.74 g l^–1 for lactose and 0.14 mg l^–1 for oxygen, respectively. For a wide range of dilution rates, the yield was 0.68 g g^–1 biomass per lactose and the maintenance coefficient 0.005 g g^–1 h^–1 lactose per biomass, respectively. The maximum biomass productivity achieved was 2 g l^–1 h^–1 biomass at dilution rates of 0.16–0.17 h^–1 with a lactose concentration of 20 g l^–1 in the feed. The crude protein and total nucleic acid contents increased with a dilution rate, crude protein content varied from 43% to 54% and total nucleic acids from 6 to 9% in the range of dilution rates from 0.05 to 0.2 h^–1, while the Lowry protein content was almost constant at approximately 37.5% of dry matter.Nomenclature (mg l^–1) C_o initial concentration of dissolved oxygen - (h^–1) D dilution rate - (mg l^–1) K₀₂ saturation coefficient for oxygen - (g l^–1) K_s saturation coefficient for substrate - (g g^–1 h^–1) lactose per biomass) m maintenance energy coefficient - (mM g^–1 h^–1O₂ per biomass) Q₀₂ specific oxygen uptake rate - (g l^–1) S residual substrate concentration at steady state - (g l^–1) S_o initial substrate concentration in feed - (min) t_1/2 time when C_o is equal to C_o/2 - (g l^–1) X biomass concentration - (g l^–1) X biomass concentration at steady state - (g g^–1 biomass per lactose) Y_G yield coefficient for cell growth - (g g^–1 biomass per lactose) Y_x/s overall yield coefficient - (h^–1) specific growth rate     

Distribution of zinc-tolerant bacteria in stream sediments

The distribution of zinc-tolerant bacteria in sediments from three stream sites containing high (3125 g g^–1), medium (291 g g^–1), and low (109 g g^–1) concentrations of Zn was determined. Zinc tolerance was estimated by the ability of bacteria to grow on media amended with Zn concentrations ranging from 4 to 512 mg 1^–1. The presence of Zn-tolerant bacteria was correlated with the degree of heavy metal contamination; this correlation was more closely associated with readily extractable heavy metal concentrations than with the more rigorously extracted heavy metals. Low concentrations of Zn in media (4 to 16 mg 1^–1) were stimulatory to growth of bacteria from contaminated sites while concentrations as low as 4 mg 1^–1 were inhibitory to bacteria from the control site.     

Abiotic metal stress enhances diosgenin yield in Dioscorea bulbifera L. cultures

Lower concentrations of CuSO₄ (25–75 M) in the MS medium supplemented with 0.1 mg l^–1 IAA+5.0 mg l^–1 Kn+500 mg l^–1 CH+10 mg l^–1 Cyst hyd enhanced the growth of regenerants of Dioscorea bulbifera L. CuSO₄ (75 M) induced an appreciable diosgenin yield in the regenerants compared to those obtained on media without Cu. The presence of Cu thus seems to stimulate diosgenin production. The regenerants also differentiated bulbils on lower concentrations of Cu. At CuSO₄ (100 M), however, cultures showed poor growth as well as a low diosgenin yield. Increased proline and protein contents were recorded in cultures grown on Cu-enriched media.     

Indigo production in hairy root cultures of Polygonum tinctorium Lour.

The transformed root culture of Polygonum tinctorium Lour. was established by infecting leaf explants with Agrobacterium rhizogenes A4. These cultures were examined for their growth and indigo content under various culture conditions. Among the four different culture media tested, SH medium showed the highest yield for root growth (28 mg dry wt/30 ml) and indigo production (152 g/dry wt). In SH medium, 30 g sucrose l^–1, 2500 mg KNO₃ l^–1, 300 mg NH₄H₂PO₄ l^–1 were the best conditions for indigo production at pH 5.7. The production of indigo in hairy roots slightly increased with the addition of 200 mg chitosan l^–1 (186 g/dry wt) and 20 U pectinase l^–1 (181 g/dry wt).