Chloraminated drinking water does not generate bacterial resistance to antibiotics in Pseudomonas aeruginosa biofilms

Aim: To determine if exposure of Pseudomonas aeruginosa biofilms to chloraminated drinking water can lead to individual bacteria with resistance to antibiotics. Methods and Results: Biofilms of P. aeruginosa PA14 were grown in drinking water in a Kadouri drip‐fed reactor; the biofilms were treated with either 0·5 mg l^‐1 or 1·0 mg l^‐1 of chloramine for 15 or 21 days; control biofilms were grown in water without chloramine. Fewer isolates with antibiotic resistance were obtained from the chloramine‐treated biofilms as compared to the control. Minimum inhibitory concentrations (MIC) for selected antibiotic‐resistant isolates were determined using ciprofloxacin, tobramycin, gentamicin, rifampicin and chloramphenicol. All of the isolates tested had increased resistance over the wildtype to ciprofloxacin, rifampicin and chloramphenicol, but were not resistant to tobramycin or gentamicin. Conclusions: Under these test conditions, there was no detectable increase in antibiotic resistance in P. aeruginosa exposed as biofilms to disinfectant residues in chloraminated drinking water. Significance and Impact of the study: Chloramine in drinking water, while unable to kill biofilm bacteria, does not increase the potential of P. aeruginosa to become resistant to antibiotics.     

Modelling antisepsis using defined populations of facultative and anaerobic wound pathogens grown in a basally perfused biofilm model

An in vitro model was developed to assess the effects of topical antimicrobials on taxonomically defined wound biofilms. Biofilms were exposed over seven days to povidone-iodine, silver acetate or polyhexamethylene biguanide (PHMB) at concentrations used in wound dressings. The rank order of tolerance in multi-species biofilms, based on an analysis of the average bacterial counts over time was P. aeruginosa > methicillin-resistant Staphylococcus aureus (MRSA) > B. fragilis > S. pyogenes. The rank order of effectiveness for the antimicrobials in the biofilm model was povidone-iodine > PHMB > silver acetate. None of the test compounds eradicated P. aeruginosa or MRSA from the biofilms although all compounds except silver acetate eliminated S. pyogenes. Antimicrobial effectiveness against bacteria grown in multi-species biofilms did not correlate with planktonic susceptibility. Defined biofilm populations of mixed-species wound pathogens could be maintained in the basal perfusion model, facilitating the efficacy testing of treatments regimens and potential dressings against multi-species biofilms composed of wound isolates.     

Microbial nitrogen removal of ammonia wastewater in poly (butylenes succinate)-based constructed wetland: effect of dissolved oxygen

Constructed wetland (CW) is popular in wastewater treatment for its prominent advantage of low construction and operation cost. However, the nitrogen removal in conventional CW is usually limited by the low dissolved oxygen (DO) and insufficient electron donor. This paper investigated the nitrogen removal performance and mechanisms in the poly (butylenes succinate)-based CW (PBS-CW) while treating ammonia wastewater under different DO levels. The average DO contents in limited-aeration and full-aeration phases were 1.68 mg L⁻¹ and 5.71 mg L⁻¹, respectively. Results indicated that, with the ammonia nitrogen loading rate of 25 g N m⁻³ day⁻¹, total nitrogen removal ratios in the PBS-CW under the limited-aeration and full-aeration phases were 72% and 99%, respectively. Combined analyses revealed that simultaneous nitrification and denitrification (SND) via nitrite/nitrate were the main microbial nitrogen removal pathways in the aeration phase of the PBS-CW (> 89%). The microbial carrier of biodegradable material was believed to play a significant role in prompting SND performance while dealing with low C/N wastewater. Due to the coexistence of micro-anaerobic zone and carbon supply inside the coated biofilm, the high DO level in the PBS-CW increased the abundance of the nitrifying bacteria (amoA and nxrA), denitrifying bacteria (narG, nirK, nirS, and nosZ), and even anammox bacteria (anammox 16s rRNA). These features are beneficial to many microbial processes which require the simultaneous aerobic, anoxic, and anaerobic environment.

     

Decolourization of Amaranth dye by bacterial biofilm in batch and continuous packed bed bioreactor

The aim of this study was to exploit the bacterial biofilms to remove dyes from industrial effluents. Biofilms of strains AK1, AK2, VKY1 and a consortium on sheep bone chips were examined in batch, repeated batch and continuous packed bed bioreactor. Biofilms are more efficient for decolourization of Amaranth dye at three different dye concentrations (200, 400, and 600 mg l⁻¹). 100% decolourization of Amaranth dye was observed even at higher concentrations (400 and 600 mg l⁻¹) by all the tested biofilms in 24 h than that of corresponding free cells. The biofilms were superior over those of free cells and could be reused for more than 18 repeated cycles. In a packed bed bioreactor, biofilms could be operated with much higher dilution rates and at lower hydraulic retention time. Further, the decolourization of dye was confirmed by UV–visible spectrophotometer, TLC and HPLC analysis of Amaranth dye degradation products from packed bed bioreactor effluent.     

Biofilm development and enhanced stress resistance of a model,mixed-species community biofilm

Most studies of biofilm biology have taken a reductionist approach, where single-species biofilms have been extensively investigated. However, biofilms in nature mostly comprise multiple species, where interspecies interactions can shape the development, structure and function of these communities differently from biofilm populations. Hence, a reproducible mixed-species biofilm comprising Pseudomonas aeruginosa, Pseudomonas protegens and Klebsiella pneumoniae was adapted to study how interspecies interactions affect biofilm development, structure and stress responses. Each species was fluorescently tagged to determine its abundance and spatial localization within the biofilm. The mixed-species biofilm exhibited distinct structures that were not observed in comparable single-species biofilms. In addition, development of the mixed-species biofilm was delayed 1–2 days compared with the single-species biofilms. Composition and spatial organization of the mixed-species biofilm also changed along the flow cell channel, where nutrient conditions and growth rate of each species could have a part in community assembly. Intriguingly, the mixed-species biofilm was more resistant to the antimicrobials sodium dodecyl sulfate and tobramycin than the single-species biofilms. Crucially, such community level resilience was found to be a protection offered by the resistant species to the whole community rather than selection for the resistant species. In contrast, community-level resilience was not observed for mixed-species planktonic cultures. These findings suggest that community-level interactions, such as sharing of public goods, are unique to the structured biofilm community, where the members are closely associated with each other.     

The influence of biofilm structure and total interaction energy on Escherichia coli retention by Pseudomonas aeruginosa biofilm

The retention of a surrogate pathogenic bacterium, Escherichia coli^T , in Pseudomonas aeruginosa biofilms (with various EPS excreting capacities) was investigated using a laboratory flow cell system. The structural characteristics of the biofilm, as well as the quantity of E. coli^T retained in the biofilm, were assessed using confocal laser scanning microscopy coupled with image analysis. In addition, the total interaction energy between E. coli^T and the P. aeruginosa biofilm was computed with the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, which provided an additional context to explain the pathogen interaction in aquatic biofilms. The correlations between the quantity of detained E. coli^T cells and the structural characteristics of the biofilm were analysed and the results indicated that the heterogeneity of the biofilm could create a quiescent zone leading to temporary retention of E. coli^T within the biofilm. Overall, this study provided insights toward understanding the retention of pathogenic bacteria in environmental biofilms.     

Effect of shear on morphology,viability and metabolic activity of succinic acid-producing Actinobacillus succinogenes biofilms

Two custom-designed bioreactors were used to evaluate the effect of shear on biofilms of a succinic acid producer, Actinobacillus succinogenes. The first bioreactor allowed for in situ removal of small biofilm samples used for microscopic imaging. The second bioreactor allowed for complete removal of all biofilm and was used to analyse biofilm composition and productivity. The smooth, low porosity biofilms obtained under high shear conditions had an average cell viability of 79% compared to 57% at the lowest shear used. The maximum cell-based succinic acid productivity for high shear biofilm was 2.4 g g⁻¹DCW h⁻¹ compared to the 0.8 g g⁻¹DCW h⁻¹ of the low shear biofilm. Furthermore, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assays confirmed higher cell metabolic activities for high shear developed biofilm compared to biofilm developed at low shear conditions. Results clearly indicated that high shear biofilm cultivation has beneficial morphological, viability, and cell-based productivity characteristics.

     

Effects of heavy metals on aerobic denitrification by strain Pseudomonas stutzeri PCN-1

Effects of heavy metals on aerobic denitrification have been poorly understood compared with their impacts on anaerobic denitrification. This paper presented effects of four heavy metals (Cd(II), Cu(II), Ni(II), and Zn(II)) on aerobic denitrification by a novel aerobic denitrifying strain Pseudomonas stutzeri PCN-1. Results indicated that aerobic denitrifying activity decreased with increasing heavy metal concentrations due to their corresponding inhibition on the denitrifying gene expression characterized by a time lapse between the expression of the nosZ gene and that of the cnorB gene by PCN-1, which led to lower nitrate removal rate (1.67∼6.67 mg L⁻¹ h⁻¹), higher nitrite accumulation (47.3∼99.8 mg L⁻¹), and higher N₂O emission ratios (5∼283 mg L⁻¹/mg L⁻¹). Specially, promotion of the nosZ gene expression by increasing Cu(II) concentrations (0∼0.05 mg L⁻¹) was found, and the absence of Cu resulted in massive N₂O emission due to poor synthesis of N₂O reductase. The inhibition effect for both aerobic denitrifying activity and denitrifying gene expression was as follows from strongest to least: Cd(II) (0.5∼2.5 mg L⁻¹) > Cu(II) (0.5∼5 mg L⁻¹) > Ni(II) (2∼10 mg L⁻¹) > Zn(II) (25∼50 mg L⁻¹). Furthermore, sensitivity of denitrifying gene to heavy metals was similar in order of nosZ > nirS ≈ cnorB > napA. This study is of significance in understanding the potential application of aerobic denitrifying bacteria in practical wastewater treatment.

     

Diffusion Retardation by Binding of Tobramycin in an Alginate Biofilm Model

Microbial cells embedded in a self-produced extracellular biofilm matrix cause chronic infections, e. g. by Pseudomonas aeruginosa in the lungs of cystic fibrosis patients. The antibiotic killing of bacteria in biofilms is generally known to be reduced by 100–1000 times relative to planktonic bacteria. This makes such infections difficult to treat. We have therefore proposed that biofilms can be regarded as an independent compartment with distinct pharmacokinetics. To elucidate this pharmacokinetics we have measured the penetration of the tobramycin into seaweed alginate beads which serve as a model of the extracellular polysaccharide matrix in P. aeruginosa biofilm. We find that, rather than a normal first order saturation curve, the concentration of tobramycin in the alginate beads follows a power-law as a function of the external concentration. Further, the tobramycin is observed to be uniformly distributed throughout the volume of the alginate bead. The power-law appears to be a consequence of binding to a multitude of different binding sites. In a diffusion model these results are shown to produce pronounced retardation of the penetration of tobramycin into the biofilm. This filtering of the free tobramycin concentration inside biofilm beads is expected to aid in augmenting the survival probability of bacteria residing in the biofilm.     

Candida albicans: Molecular interactions with Pseudomonas aeruginosa and Staphylococcus aureus

The fields of mycology and bacteriology have traditionally functioned independently of each other despite the fundamental actuality that fungi and bacteria not only co-exist but also interact within several niches. In the clinical context, these interactions commonly occur within biofilms, which can be composed of single-species communities or mixed-species populations and recent studies have shown that the properties of mixed-species populations differ from those of their individual components. The interacting bacteria and fungi can exert effects on microbial behavior, dissemination, survival, the response to antimicrobials and, ultimately, patient prognosis. Microbes within biofilms exhibit increased resistance to antimicrobial agents, and a significant amount of research has thus focused on gaining an understanding of how inter-domain interactions affect biofilm formation and the response to antimicrobial therapies. Candida albicans, a commensal and opportunistic pathogen of humans, is among the fungi most frequently identified in mixed-species biofilms. Here, we review interactions between C. albicans and bacterial species with which it is commonly isolated, namely Pseudomonas aeruginosa and Staphylococcus aureus in order to look into the spectrum of biologically relevant fungal–bacterial interactions that have been described.     

Inhibition of Biofilm Formation by T7 Bacteriophages Producing Quorum-Quenching Enzymes

Bacterial growth in biofilms is the major cause of recalcitrant biofouling in industrial processes and of persistent infections in clinical settings. The use of bacteriophage treatment to lyse bacteria in biofilms has attracted growing interest. In particular, many natural or engineered phages produce depolymerases to degrade polysaccharides in the biofilm matrix and allow access to host bacteria. However, the phage-produced depolymerases are highly specific for only the host-derived polysaccharides and may have limited effects on natural multispecies biofilms. In this study, an engineered T7 bacteriophage was constructed to encode a lactonase enzyme with broad-range activity for quenching of quorum sensing, a form of bacterial cell-cell communication via small chemical molecules (acyl homoserine lactones [AHLs]) that is necessary for biofilm formation. Our results demonstrated that the engineered T7 phage expressed the AiiA lactonase to effectively degrade AHLs from many bacteria. Addition of the engineered T7 phage to mixed-species biofilms containing Pseudomonas aeruginosa and Escherichia coli resulted in inhibition of biofilm formation. Such quorum-quenching phages that can lyse host bacteria and express quorum-quenching enzymes to affect diverse bacteria in biofilm communities may become novel antifouling and antibiofilm agents in industrial and clinical settings.     

Comparative Effect of Chlorhexidine and Some Mouthrinses on Bacterial Biofilm Formation on Titanium Surface

The aim of the present study was to evaluate the effectiveness of chlorhexidine digluconate (CHX) and commonly used mouthrinses to single- and poly-species biofilms by S. mutans, S. aureus and P. aeruginosa, on titanium discs of grade IV. The formation of single- and poly-species biofilms at 16.5, 40.5 and 64.5-h incubation on titanium surface was evaluated by plate count (CFU ml⁻¹) before and after exposure to CHX and four mouthrinses (Curasept, Listerine, Meridol and Buccagel) and expressed as percentage of Inhibitory Activity (IA%). The application of the different anti-plaque formulations on biofilm can reduce the adhesion of bacteria to titanium surface with different degrees. The higher efficacy was observed for Listerine that shows IA% = 100 on the biofilm formed by S. mutans at 16.5 h. Log count of CFU was dependent to culture time and four mouthrinses for S. mutans and S. aureus, whilst was not dependent to culture time but to mouthrinses for P. aeruginosa. In general, the efficacy was particularly lesser to poly-species biofilms; no statistical differences were evidenced between all the mouthrinses and CHX as control group. The tested mouthrinses, compared to reference CHX 0.2%, have demonstrated a significant lower antibacterial activity than Listerine towards the experimental biofilms. This “in vitro” biofilm model should prove extremely useful for pre-clinical testing of anti-plaque agents, which inhibit biofilm formation, can prevent subsequent implant failure.     

In vitro efficacy of bismuth thiols against biofilms formed by bacteria isolated from human chronic wounds

Aims: The purpose of this study was to evaluate the antimicrobial efficacy of thirteen bismuth thiol preparations for bactericidal activity against established biofilms formed by two bacteria isolated from human chronic wounds. Methods: Single species biofilms of a Pseudomonas aeruginosa or a methicillin‐resistant Staphylococcus aureus were grown in either colony biofilm or drip‐flow reactors systems. Biofilms were challenged with bismuth thiols, antibiotics or silver sulfadiazine, and log reductions were determined by plating for colony formation. Conclusions: Antibiotics were ineffective or inconsistent against biofilms of both bacterial species tested. None of the antibiotics tested were able to achieve >2 log reductions in both biofilm models. The 13 different bismuth thiols tested in this investigation achieved widely varying degrees of killing, even against the same micro‐organism in the same biofilm model. For each micro‐organism, the best bismuth thiol easily outperformed the best conventional antibiotic. Against P. aeruginosa biofilms, bismuth‐2,3‐dimercaptopropanol (BisBAL) at 40–80 μg ml^?1 achieved >7·7 mean log reduction for the two biofilm models. Against MRSA biofilms, bismuth‐1,3‐propanedithiol/bismuth‐2‐mercaptopyridine N‐oxide (BisBDT/PYR) achieved a 4·9 log reduction. Significance and Impact of the Study: Bismuth thiols are effective antimicrobial agents against biofilms formed by wound bacteria and merit further development as topical antiseptics for the suppression of biofilms in chronic wounds.     

Disinfection of bacterial biofilms in pilot-scale cooling tower systems

The impact of continuous chlorination and periodic glutaraldehyde treatment on planktonic and biofilm microbial communities was evaluated in pilot-scale cooling towers operated continuously for 3 months. The system was operated at a flow rate of 10,080 l day^?1. Experiments were performed with a well-defined microbial consortium containing three heterotrophic bacteria: Pseudomonas aeruginosa, Klebsiella pneumoniae and Flavobacterium sp. The persistence of each species was monitored in the recirculating cooling water loop and in biofilms on steel and PVC coupons in the cooling tower basin. The observed bacterial colonization in cooling towers did not follow trends in growth rates observed under batch conditions and, instead, reflected differences in the ability of each organism to remain attached and form biofilms under the high-through flow conditions in cooling towers. Flavobacterium was the dominant organism in the community, while P. aeruginosa and K. pneumoniae did not attach well to either PVC or steel coupons in cooling towers and were not able to persist in biofilms. As a result, the much greater ability of Flavobacterium to adhere to surfaces protected it from disinfection, whereas P. aeruginosa and K. pneumoniae were subject to rapid disinfection in the planktonic state.     

Nitrite modulates bacterial antibiotic susceptibility and biofilm formation in association with airway epithelial cells

Pseudomonas aeruginosa is the major pathogenic bacteria in cystic fibrosis and other forms of bronchiectasis. Growth in antibiotic-resistant biofilms contributes to the virulence of this organism. Sodium nitrite has antimicrobial properties and has been tolerated as a nebulized compound at high concentrations in human subjects with pulmonary hypertension; however, its effects have not been evaluated on biotic biofilms or in combination with other clinically useful antibiotics. We grew P. aeruginosa on the apical surface of primary human airway epithelial cells to test the efficacy of sodium nitrite against biotic biofilms. Nitrite alone prevented 99% of biofilm growth. We then identified significant cooperative interactions between nitrite and polymyxins. For P. aeruginosa growing on primary CF airway cells, combining nitrite and colistimethate resulted in an additional log of bacterial inhibition compared to treating with either agent alone. Nitrite and colistimethate additively inhibited oxygen consumption by P. aeruginosa. Surprisingly, whereas the antimicrobial effects of nitrite in planktonic, aerated cultures are nitric oxide (NO) dependent, antimicrobial effects under other growth conditions are not. The inhibitory effect of nitrite on bacterial oxygen consumption and biofilm growth did not require NO as an intermediate as chemically scavenging NO did not block growth inhibition. These data suggest an NO-radical independent nitrosative or oxidative inhibition of respiration. The combination of nebulized sodium nitrite and colistimethate may provide a novel therapy for chronic P. aeruginosa airway infections, because sodium nitrite, unlike other antibiotic respiratory chain “poisons,” can be safely nebulized at high concentration in humans.     

Bioremediation of metal contamination in the Plankenburg River,Western Cape,South Africa

Three bioreactors (two laboratory-scale and one on-site) were evaluated for their efficiency to reduce metal concentrations in water collected from the Plankenburg River, South Africa. Water (bioreactors one, two and on-site) and bioballs (bioreactors two and on-site) collected throughout the study periods were digested and analysed using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). Aluminium (Al), nickel (Ni), and zinc (Zn) concentrations decreased from 0.41 mg l^?1 to 0.06 mg l^?1 (85%), 0.2 mg l^?1 to 0.07 mg l^?1 (65%) and 75 mg l^?1 to 0.02 mg l^?1 (97%), respectively (bioreactor one). Aluminium [(1.55–0.38 mg l^?1 (75%)], copper (Cu) [57% (from 0.33 mg l^?1 to 0.14 mg l^?1)], iron (Fe) [71.99–40.4 mg l^?1 (44%)] and manganese (Mn) [57% (0.07–0.03 mg l^?1)] concentrations also decreased in the water samples from bioreactor two. In the on-site, six-tank bioreactor system, concentrations for Fe, Cu, Mn and Ni decreased, while Zn and Al concentrations increased. The concentrations recorded in biofilm samples were higher than the corresponding water samples. The bioballs employed in the bioreactor were thus shown to be efficient attachment surfaces for biofilm development and subsequent metal accumulation. Potentially metal-tolerant organisms (Pseudomonas sp., Sphingomonas sp., and Bacillus sp.) were also identified using phylogeny.     

A novel in vitro flat‐bed perfusion biofilm model for determining the potential antimicrobial efficacy of topical wound treatments

Aims: To develop an in vitro flat‐bed perfusion biofilm model that could be used to determine the antimicrobial efficacy of topically applied treatments. Methods and Results: Pseudomonas aeruginosa and Staphylococcus aureus biofilms were grown within continuously perfused cellulose matrices. Enumeration of the biofilm density and eluate was performed at various sampling times, enabling determination of the biofilm growth rate. Two antimicrobial wound dressings were applied to the surface of mature biofilms and periodically sampled. To enable real‐time imaging of biofilm growth and potential antimicrobial kinetics, a bioluminescent Ps. aeruginosa biofilm was monitored using low‐light photometry. Target species produced reproducible steady‐state biofilms at a density of c. 10⁷ per biofilm support matrix, after 24‐h perfusion. Test dressings elicited significant antimicrobial effects, producing differing kill kinetic profiles. There was a good correlation between photon and viable count data. Conclusions: The model enables determination of the antimicrobial profile of topically applied treatments against target species biofilms, accurately differentiating bactericidal from bacteriostatic effects. Moreover, these effects could be monitored in real time using bioluminescence. Significance and Impact of the Study: This is the first in vitro biofilm model which can assess the antimicrobial potential of topical therapies in a dynamic growth environment.     

Synthesis of benzoylthiourea derivatives and analysis of their antibacterial performance against planktonic Staphylococcus aureus and its biofilms

Following the appearance of several antimicrobial agents to control the spread of infections, two major challenges have emerged: (i) the occurrence and blowout of multiresistant bacteria and the increase of chronic diseases and (ii) difficult-to-eradicate infections. In this study, we tested five benzoylthiourea derivatives for their ability to inhibit and stop bacterial growth and evaluated the possible influence of 1,2,4-triazolyl-benzoylthiourea derivative 4 on the formation and eradication of Staphylococcus aureus biofilms. Benzoylthiourea derivatives 4 , 6 , 10 , 11 and 13 were obtained in one or two steps with low cost and subjected to tests to identify their minimum inhibitory concentration (MIC) and minimum bactericidal concentration. In vitro tests were also performed to assess their effects on biofilm formation and in preformed biofilms and scanning electron microscopy was used to visualize the effects on biofilm formation. The 1,2,4-triazolyl-benzoylthiourea derivative 4 showed bacteriostatic activity against the S. aureus HU25 clinical strain with an MIC of 16 µg ml⁻¹, which is below the toxic concentration (at 2500 µg ml⁻¹, 62·25% of the cells remained viable). Compound 4 also effectively prevented biofilm formation at the three subinhibitory concentrations tested (1/2 MIC, 1/4 MIC and 1/8 MIC) as confirmed by scanning electron microscopy. For breakdown of formed biofilms, the main influence was at a subinhibitory concentration (1/2 MIC). These findings make compound 4 a strong candidate for studies on the development of new antimicrobial and antibiofilm agents.     

Potential of antimicrobial treatment of linear low-density polyethylene with poly((tert-butyl-amino)-methyl-styrene) to reduce biofilm formation in the food industry

Antimicrobial surfaces are one approach to prevent biofilms in the food industry. The aim of this study was to investigate the effect of poly((tert-butyl-amino)-methyl-styrene) (poly(TBAMS)) incorporated into linear low-density polyethylene (LLDPE) on the formation of mono- and mixed-species biofilms. The biofilm on untreated and treated LLDPE was determined after 48 and 168 h. The comparison of the results indicated that the ability of Listeria monocytogenes to form biofilms was completely suppressed by poly(TBAMS) (Δ_168 h 3.2 log₁₀ cfu cm^?2) and colonization of Staphylococcus aureus and Escherichia coli was significantly delayed, but no effect on Pseudomonas fluorescens was observed. The results of dual-species biofilms showed complex interactions between the microorganisms, but comparable effects on the individual bacteria by poly(TBAMS) were identified. Antimicrobial treatment with poly(TBAMS) shows great potential to prevent biofilms on polymeric surfaces. However, a further development of the material is necessary to reduce the colonization of strong biofilm formers.