Characterization of a thermophilic sulfur oxidizing enrichment culture dominated by a Sulfolobus sp. obtained from an underground hot spring for use in extreme bioleaching conditions

A thermoacidophilic elemental sulfur and chalcopyrite oxidizing enrichment culture VS2 was obtained from hot spring run-off sediments of an underground mine. It contained only archaeal species, namely a Sulfolobus metallicus-related organism (96% similarity in partial 16S rRNA gene) and Thermoplasma acidophilum (98% similarity in partial 16S rRNA gene). The VS2 culture grew in a temperature range of 35–76°C. Sulfur oxidation by VS2 was optimal at 70°C, with the highest oxidation rate being 99 mg S⁰ l⁻¹ day⁻¹. At 50°C, the highest sulfur oxidation rate was 89 mg l⁻¹ day⁻¹ (in the presence of 5 g Cl⁻ l⁻¹). Sulfur oxidation was not significantly affected by 0.02–0.1 g l⁻¹ yeast extract or saline water (total salinity of 0.6 M) that simulated mine water at field application sites with availability of only saline water. Chloride ions at a concentration above 10 g l⁻¹ inhibited sulfur oxidation. Both granular and powdered forms of sulfur were bioavailable, but the oxidation rate of granular sulfur was less than 50% of the powdered form. Chalcopyrite concentrate oxidation (1% w/v) by the VS2 resulted in a 90% Cu yield in 30 days.     

Extraction, isolation and NMR data of the tetraether lipid calditoglycerocaldarchaeol (GDNT) from Sulfolobus metallicus harvested from a bioleaching reactor

The successful extraction and isolation of the hydrolysed tetraether lipid calditoglycerocaldarchaeol (GDNT) from Sulfolobus metallicus, a key thermophilic bioleaching archaeon, is described. The archaeal biomass was recovered directly from a thermophilic (68 degrees C) bioleaching tank reactor used to extract nickel from a pentlandite mineral concentrate. The initial Soxhlet extraction method employed was scaled to a bench-scale extraction procedure suitable for the preparation of gram-scale quantities of GDNT. The GDNT so obtained was analysed by 1D- and 2D-NMR techniques, providing the first complete 13C and 2D-NMR data-set for GDNT, including that for the intact underivatised calditol moiety. The study demonstrates the feasibility of recovering high-quality GNDT from thermophilic archaeal-mediated bioleaching reactors. The recovery of these lipids at relatively low cost, as a by-product from bioleaching reactors used in the metals processing industry, has important implications for future tetraether lipid availability and costs.     

Thermophilic bioleaching of arsenopyrite usingSulfolobus and a semi-continuous laboratory procedure

Summary A laboratory equipment for pumping slurries is described. The pumping is performed semi-continuously by using a plastic syringe, a set of different valves, and a programmable electronic unit. The reproducibility of the pumping is demonstrated. Bioleaching of a gold-containing arsenopyrite slurry was done withSulfolobus at 70°C using the semi-continuous procedure and with a retention time of 100 h for the mineral. Arsenic was completely released at a rate of 109 mg l^–1 h^–1. The gold recovery is related to the amount of iron and arsenic dissolved and is shown to have a correlation factor of approximately one relative to the release of arsenic.     

Thermal unfolding of the archaeal DNA and RNA binding protein Ssh10

The reversible thermal unfolding of the archaeal histone-like protein Ssh10b from the extremophile Sulfolobus shibatae was studied using differential scanning calorimetry and circular dichroism spectroscopy. Analytical ultracentrifugation and gel filtration showed that Ssh10b is a stable dimer in the pH range 2.5–7.0. Thermal denaturation data fit into a two-state unfolding model, suggesting that the Ssh10 dimer unfolds as a single cooperative unit with a maximal melting temperature of 99.9 °C and an enthalpy change of 134 kcal/mol at pH 7.0. The heat capacity change upon unfolding determined from linear fits of the temperature dependence of ΔH^cal is 2.55 kcal/(mol K). The low specific heat capacity change of 13 cal/(mol K residue) leads to a considerable flattening of the protein stability curve (ΔG (T)) and results in a maximal ΔG of only 9.5 kcal/mol at 320 K and a ΔG of only 6.0 kcal/mol at the optimal growth temperature of Sulfolobus.     

Fermentation of cheese whey by a mixed culture ofClostridium beijerinckii andBacillus cereus

Summary Fermentation of cheese whey to produce butanol and butyric acid was carried out using a mixed culture ofClostridium beijerinkii andBacillus cereus. Fermentation selectivities were studied by controlling the pH of the system. Controlled pH values higher than 6.5 as well as those below 5.0 were not conducive to butanol production. Maximum product formation was obtained by controlling the pH at 5.5. When compared with the results obtained using the pure culture ofC. beijerinckii, a higher butanol concentration was obtained in the mixed culture without sacrificing the level of butyric acid formed.     

Volatilisation of metals and metalloids by the microbial population of an alluvial soil

In order to assess the microbial contribution to the volatilisation of metal(loid)s by methylation and hydridisation in the environment, we focused on soils of different origin. Here, we describe the biogenic production of volatile metal(loid) species of an alluvial soil with rather low metal(loid) contamination. The production of volatile metal(loid) compounds was monitored in soil suspensions kept under anaerobic conditions over an incubation time of 3 months. In the headspace of the samples, we detected mainly hydrids and methylated derivatives of a broad variety of elements such as arsenic, antimony, bismuth, selenium, tellurium, mercury, tin and lead, with the volatile products of arsenic, antimony and selenium representing the highest portions. Classical cultivation-dependent procedures resulted in the isolation of a strictly anaerobic Gram-positive strain (ASI-1), which shows a high versatility in transforming metal(loid) ions to volatile derivatives. Strain ASI-1 is affiliated to the species Clostridium glycolicum due to its high 16S rDNA sequence similarity with members of that species. As shown by fluorescence in situ hybridisation, strain ASI-1 amounts to approximately 2% of the total microbial flora of the alluvial soil. Since the spectrum of volatile metal(loid) compounds produced by this strain is very similar to that obtained by the whole population regarding both the broad variety of metal(loid)s converted and the preference for volatilising arsenic, antimony and selenium, we suggest that this strain may represent a dominant member of the metal(loid) volatilisating population in this habitat.     

Prokaryotic and viral diversity patterns in marine plankton

Prokaryotes and viruses play critical roles in marine ecosystems, where they are both highly abundant and active. Although early work on both prokaryotes and viruses revealed little of their diversity, molecular biological approaches now allow us to break apart these black boxes. The most revealing methods have been cloning and sequencing of 16S rRNA genes, community fingerprinting (such as terminal restriction fragment length polymorphism; TRFLP), and fluorescent in situ hybridization. Viral diversity can now be analyzed by pulsed field gel electrophoresis (PFGE) of viral genomes. The present paper summarizes recent advances in bacterial and virus diversity studies, and presents examples of measurements from polar, tropical, and temperate marine waters. Terminal restriction fragment length polymorphism shows that many of the same operationally defined prokaryotic taxa are present in polar and tropical waters, but there are also some unique to each environment. By one measure, a sample from over a Philippine coral reef had about 100 operationally defined taxa, whereas one from the open tropical Atlantic had about 50 and from the icy Weddell Sea, about 60. Pulsed field gel electrophoresis of two depth profiles, to 500 m, from Southern California, measured 2 months apart, shows striking similarities in viral genome length diversity over time, and some distinct differences with depth. The euphotic zone samples had extremely similar apparent diversity, but samples from 150 m and 500 m were different. An obvious next step is to compare the bacterial and viral diversity patterns, because theory tells us they should be related.     

DNA methyltransferases: Activity minigel analysis and determination with DNA covalently bound to a solid matrix

We describe two methods that facilitate detection and characterization of DNA methyltransferases: activity gel analysis and the use of DNA-cellulose or DNA-Sepharose in DNA methylation reactions. The first permits identification of catalytic subunits, determination of the influence of proteolysis, and evolutionary or developmental studies. The second allows accurate and fast determination of DNA methyltransferase activities in crude extracts and during purification.     

Characterization of the trehalosyl dextrin-forming enzyme from the thermophilic archaeon <Emphasis Type="Italic">Sulfolobus solfataricus</Emphasis> ATCC 35092

The trehalosyl dextrin-forming enzyme (TDFE) mainly catalyzes an intramolecular transglycosyl reaction to form trehalosyl dextrins from dextrins by converting the -1,4-glucosidic linkage at the reducing end to an -1,1-glucosidic linkage. In this study, the treY gene encoding TDFE was PCR cloned from the genomic DNA of Sulfolobus solfataricus ATCC 35092 to an expression vector with a T7 lac promoter and then expressed in Escherichia coli. The recombinant TDFE was purified sequentially by using heat treatment, ultrafiltration, and gel filtration. The obtained recombinant TDFE showed an apparent optimal pH of 5 and an optimal temperature of 75°C. The enzyme was stable in a pH range of 4.5–11, and the activity remained unchanged after a 2-h incubation at 80°C. The transglycosylation activity of TDFE was higher when using maltoheptaose as substrate than maltooligosaccharides with a low degree of polymerization (DP). However, the hydrolysis activity of TDFE became stronger when low DP maltooligosaccharides, such as maltotriose, were used as substrate. The ratios of hydrolysis activity to transglycosylation activity were in the range of 0.2–14% and increased when the DP of substrate decreased. The recombinant TDFE was found to exhibit different substrate specificity, such as its preferred substrates for the transglycosylation reaction and the ratio of hydrolysis to transglycosylation of the enzyme reacting with maltotriose, when compared with other natural or recombinant TDFEs from Sulfolobus.     

Identification of Denitrifying Bacteria Diversity in an Activated Sludge System by using Nitrite Reductase Genes

Nitrite reduction is the key step in the denitrification reaction with two predominant types of nitrite reductase genes: nirS and nirK. The diversity of denitrifying bacteria in a municipal wastewater treatment plant is described by using both these genes. Of the cultured colonies, 22.5% contained the NirS gene and 12.5% the nirK gene. These nitrite reductase-containing colonies could be further divided into five different types by using both restriction fragment length polymorphism and denaturing gradient gel electrophoresis analysis. Phylogenetic analysis showed that these five types of denitrifying bacteria were phylogenetically diverse. Finally, one nirS gene was obtained and compared with the published sequences.     

Distribution of a 375 bp repeat sequence inAllium (Alliaceae) as revealed by FISH

Information about evolutionary relationships between species of the genusAllium is desirable in order to facilitate breeding programmes. One approach is to study the distribution of repetitive DNA sequences among species thought on taxonomic grounds, to be closely related. We have used fluorescent in-situ hybridisation (FISH) to examine seven species within sect.Cepa of the genus (A. altaicum, A. cepa, A. fistulosum, A. galanthum, A. pskemense, A. oschaninii andA. vavilovii), one species from sect.Rhizirideum (A. roylei), two species from sect.Allium (A. sativum andA. porrum) and one species from sect.Schoenoprasum (A. schoenoprasum). Each species was probed using a 375 bp repeat sequence isolated fromA. cepa (Barnes & al. 1985), which was generated and labelled by polymerase chain reaction (PCR). No signals were detected in anyAllium species not belonging to sect.Cepa with the exception ofA. roylei, whose designation in sect.Rhizirideum is now questioned. Within sect.Cepa the probe was found to hybridize to the terminal regions of the chromosome arms of all the species examined. In addition a number of interstitial bands were detected. Use of FISH reveals a more detailed map of the location of the repeat sequences than has previously been obtained by C-banding and other staining procedures. The distribution of the terminal and interstitial sites when compared, allow us to identify three species groups namely,A. altaicum andA. fistulosum; A. cepa, A. roylei, A. oschaninii andA. vavilovii; andA. galanthum andA. pskemense.     

Conserved 5S and variable 45S rDNA chromosomal localisation revealed by FISH in <Emphasis Type="Italic">Astyanax scabripinnis</Emphasis> (Pisces,Characidae)

Fluorescence in situhybridisation (FISH) and double FISH experiments were carried out to ascertain the chromosomal distribution pattern of the 45S and 5S ribosomal (r) DNAs in four populations of the characid fish Astyanax scabripinnis – a group considered to be a species complex for its wide karyotypical and morphological diversity. The results regarding the 45S rDNA agreed with this hypothesis, since these sites showed intra- and inter-populational, numerical and positional variations. However, the data obtained with the 5S rDNA probe revealed a highly conserved chromosomal distribution pattern of these sequences among individuals of each population, as well as among the populations analysed. We consider this contrasting situation as a functional divergence between 45S and 5S ribosomal DNAs, which may reflect the localisation of these sequences in distinct nuclear compartments, leading them to undergo differentiated evolutionary processes.     

Short communication: Adverse effect of surface-active reagents on the bioleaching of pyrite and chalcopyrite by Thiobacillus ferrooxidans

Oxidation of Fe(II) iron and bioleaching of pyrite and chalcopyrite by Thiobacillus ferrooxidans was adversely affected by isopropylxanthate, a flotation agent, and by LIX 984, a solvent-extraction agent, each at 1 g/l. The reagents/l were adsorbed on the bacterial surface, decreasing the bacteria's development and preventing biooxidation. Both reagents inhibited the bioleaching of pyrite and LIX 984 also inhibited the bioleaching of chalcopyrite.     

Dinoflagellate community analysis of a fish kill using denaturing gradient gel electrophoresis

A molecular method using the polymerase chain reaction (PCR) amplification of small subunit gene sequences (18S rDNA) and denaturing gradient gel electrophoresis (DGGE) was used to determine both the population complexity and species identification of organisms in harmful algal blooms. Eighteen laboratory cultures of dinoflagellates, including Akashiwo, Gymnodinium, Heterocapsa, Karenia, Karlodinium, Pfiesteria, and Pfiesteria-like species were analyzed using dinoflagellate-specific oligonucleotide primers and DGGE. The method is sensitive and able to determine the number of species in a sample, as well as the taxonomic identity of each species, and is particularly useful in detecting differences between species of the same genus, as well as differences between morphologically similar species. Using this method, each of eight Pfiesteria-like species was verified as being clonal isolates of Pfiesteria piscicida. The sensitivity of dinoflagellate DGGE is approximately 1000 cells/ml, which is 100-fold less sensitive than real-time PCR. However, the advantage of DGGE lies in its ability to analyze dinoflagellate community structure without needing to know what is there, while real-time PCR provides much higher sensitivity and detection levels, if probes exist for the species of interest, attributes that complement DGGE analysis. In a blinded test, dinoflagellate DGGE was used to analyze two environmental fish kill samples whose species composition had been previously determined by other analyses. DGGE correctly identified the dominant species in these samples as Karlodinium micrum and Heterocapsa rotundata, proving the efficacy of this method on environmental samples. Toxin analysis of a clonal isolate obtained from the fish kill samples confirmed the presence of KmTx2, corroborating the earlier genetic identification of toxic K. micrum in the fish kill water sample.     

Physical mapping of rDNA sites in possible diploid progenitors of polyploid Festuca species

Festuca species form a polyploid series but only two of the diploid species have been firmly proposed as progenitors of any polyploid. The number and distribution of rDNA sites on the chromosomes of F. scariosa (section Scariosae) and the four diploid species that comprise section Montanae are presented with their relative DNA amounts and key morphological features. Comparisons of the results with those of some polyploid Festuca species from section Bovinae published previously indicate that F. scariosa and F. altissima could be diploid progenitors of the polyploids. It is unlikely that any one of the other three Montanae species is a progenitor of these polyploids.     

Study on reaction mechanism of bioleaching of nickel and cobalt from lateritic chromite overburdens

Depletion of high-grade ores and presence of significant quantities of metals in low-grade oxide ores has enforced to utilize the overburdens (COB) and wastes (low-grade ores) generated during mining operations. The impact of ore mineralogy and mineral–microbe interaction during bioleaching could not be ignored. Seeking to the need, a systematic study was performed to establish the reaction mechanism involved for recovery of nickel and cobalt from chromite overburden (COB), Sukinda, Orissa using pure culture of Aspergillus niger. Mineralogical analysis reveals a complete conversion of goethite into hematite phase leading to exposure of nickel particles into the micro-pores and cracks developed in the matrix which was initially found to be intertwined in the goethite lattice. As a result, it became more susceptible to attack by the fungal bio acids which in turn accelerate the dissolution rate. Organic acids like oxalic and citric acids were detected in the culture filtrate using HPLC. TEM analysis of the leached samples shows that nickel dissolute into the solution leaving a porous space in the matrix of the hematite by forming nickel oxalate or nickel citrate. Kinetics of the nickel bioleaching was studied to support the mechanism of the reaction. It was observed that the initial rate of reaction follows the chemical control dissolution reaction where as the later part fits to shrinking core model. 18% of nickel and 37.8% of cobalt was recovered from pre-treated COB at 2.5% pulp-density with 10% (v/v) fungal inoculum at 30 °C within 25 days in shake flask while 32.5% of nickel and 86% of cobalt was recovered in bioreactor.     

Isolation of a strain of <Emphasis Type="Italic">Acidithiobacillus caldus</Emphasis> and its role in bioleaching of chalcopyrite

A moderately thermophilic and acidophilic sulfur-oxidizing bacterium named S₂, was isolated from coal heap drainage. The bacterium was motile, Gram-negative, rod-shaped, measured 0.4 to 0.6 by 1 to 2 μm, and grew optimally at 42–45°C and an initial pH of 2.5. The strain S₂ grew autotrophically by using elemental sulfur, sodium thiosulfate and potassium tetrathionate as energy sources. The strain did not use organic matter and inorganic minerals including ferrous sulfate, pyrite and chalcopyrite as energy sources. The morphological, biochemical, physiological characterization and analysis based on 16S rRNA gene sequence indicated that the strain S₂ is most closely related to Acidithiobacillus caldus (>99% similarity in gene sequence). The combination of the strain S₂ with Leptospirillum ferriphilum or Acidithiobacillus ferrooxidans in chalcopyrite bioleaching improved the copper-leaching efficiency. Scanning electron microscope (SEM) analysis revealed that the chalcopyrite surface in a mixed culture of Leptospirillum ferriphilum and Acidithiobacillus caldus was heavily etched. The energy dispersive X-ray (EDX) analysis indicated that Acidithiobacillus caldus has the potential role to enhance the recovery of copper from chalcopyrite by oxidizing the sulfur formed during the bioleaching progress.