Determination of the polymorphic composition of smooth pea starch

A method for estimating the proportions of ‘A’ and ‘B’ polymorphs comprising a sample of ‘C’ type starch is proposed which uses established experimental techniques with commercially available spreadsheet and X-ray analysis software. Waxy maize, potato and smooth pea starches were used to provide X-ray diffraction patterns characteristic of the ‘A’, ‘B’ and ‘C’ starch polymorphs. Samples of amorphous starches were also prepared. The method initially involved subtraction of the amorphous phase and instrumental background from the X-ray diffraction patterns of each starch sample using the spreadsheet program, Lotus 1-2-3. The remainder of the pattern, representing the crystalline portion of the starch sample, was then analysed by profile fitting to elucidate the positions and areas of individual diffraction peaks. The ratio of the total peak area to the areas under peaks characteristic of ‘A’ and ‘B’ type starches, respectively, were used to calculate the relative proportions of these polymorphs in smooth pea starch. These proportions were found to be 56±3% ‘A’ polymorph to 44±3% ‘B’ polymorph. A ‘C’ type pattern was constructed by using Lotus 1-2-3 to combine diffraction patterns from the crystalline portions of ‘A’ and ‘B’ type starches in the proportions given above. Polymorph patterns were obtained by manipulation of the diffraction patterns from the crystalline portions of starches using Lotus 1-2-3. An ‘A’ type pattern was obtained by subtraction of a ‘B’ type pattern from that of a ‘C’ type. Similarly, a ‘B’ type pattern was obtained by subtraction of an ‘A’ type pattern from that of a ‘C’ type.     

Interpretation of small angle x-ray scattering from starch on the basis of fractals

Using small-angle X-ray scattering, the behaviour of corn and potato starches during gelatinization, swelling, and rétrogradation was investigated. The scattering patterns were analysed on the basis of the fractal concept. The main scattering source from low moisture starches could be interpreted as a ‘surface fractal’ obeying a power law with an exponent of ca —4. When the starch swelled, the surface fractal characteristic was recognised only at very low angles, and on heating it disappeared at ca 80 °C. For gelatinised starches, the whole scattering pattern obeyed the power law with the power around -2.0. This result suggests that the physical arrangement of gelatinised starch molecules is a ‘mass fractal’, i.e. a self-similar structure, in nature. Further, it was found that the scattering of the retrograded starch showed a shoulder like peak superimposed the background scattering representing the mass fractal. The corresponding Bragg spacing was estimated to be 31˜15nm.     

Extraction of starches from tuber crops using ammonia

Ammonia solution (0·03 ) was used to extract starch from various tuber crops by the conventional settling method. It was found that there was noticeable improvement in the yield of starch from Colocasia (6–16%), while it fell for sweet potato starch and remained almost the same for the other starches. The various properties of starch, thus extracted, were compared with those for starch obtained by water extraction. It was found that total amylose of all starches were unaffected while the ‘soluble amylose’ was slightly suppressed for Colocasia starch extracted with ammonia solution. Peak viscosity was found to be increased to a large extent for Colocasia and Dioscorea esculenta starches by ammonia extraction, while it was lowered for sweet potato starch. The swelling volume of Colocasia starch extracted with ammonia was similarly enhanced by 25%, but the Dioscorea esculenta starch did not show such a tendency. Sweet Potato starch suffered a reduction in swelling volume. Phosphorus content was found to be independent of the extraction medium.     

Studies on the hydrothermal modifications of new cocoyam (Xanthosoma sagittifolium) starch

Native new cocoyam starch (nNCS) was subjected to annealing (aNCS) and heat moisture treatment at 18% moisture level (h₁₈NCS), 21% moisture level (h₂₁NCS), 24% moisture level (h₂₄NCS) and 27% moisture level (h₂₇NCS) as hydrothermal treatments. Scanning electron and light microscopy revealed round and polygonal shapes with sizes ranging from 15 to 40 μm for native and modified starches. nNCS showed “A” pattern X-ray diffraction and no significant differences were observed in the X-ray pattern of the modified starches. Swelling power and solubility reduced following heat moisture treatment. At all pH studied (2–12), unmodified new cocoyam starch exhibited higher swelling capacity and solubility than the modified derivatives. Hydrothermal modifications improved water absorption capacity but reduced oil absorption capacity. Pasting temperature of native starch shifted to higher values following annealing and heat moisture treatment. Hot paste viscosity (Hv), viscosity after 30 min holding at 95 °C (Hv₃₀) and cold paste viscosity (Cv) reduced after annealing and heat moisture treatment. The result also indicates that hydrothermal treatments reduced the tendency for setback. As the number of days of storage of starch paste increased from 1 to 10, light transmittance of all the starches reduced but marked reduction of light transmittance was observed in native starch. DSC studies revealed increase in gelatinization temperature following annealing and heat moisture treatment. Starch hydrothermal modifications reduced retrogradation as enthalpies of regelatinization reduced following modifications. The regelatinization peak in the second day scanning shifted to lower temperature than the gelatinization peak in first run heating DSC curve for all samples. The regelatinization peak also became larger and shifted to higher temperature range when the storage days increased from 2 to 7.     

Effect of acid–alcohol treatment on the molecular structure and physicochemical properties of maize and potato starches

The molecular structure and physicochemical properties of acid–alcohol treated maize and potato starches (0.36% HCl in methanol at 25 °C for 1–15 days) were investigated. The yields of the modified starches were ranging from 91 to 100%. The average granule size of modified starches decreased slightly. The solubility of starches increased with the increase of treatment time, and the pasting properties confirmed the high solubility of modified starches. The gelatinization temperatures and range of gelatinization increased with the increase of treatment time except T_o (onset temperature) of maize starch. Molecular structures of modified starches suggested the degradation of starches occurred mostly within the first 5 days of treatment, and degradation rate of potato starch was higher than maize starch both in amylopectin and in amylose. Maize starch was found less susceptible to acid–alcohol degradation than potato starch.     

Changes in morphological, thermal and pasting properties of yam (Dioscorea alata) starch during growth

This study was carried out in order to compare and establish the changes in physicochemical properties of starch from four different cultivars of yam at various stages of maturity during growth. The results showed that the starch content of the four yam tubers increased as growth progressed and were in the range of 70.5–85.3% on a dry basis. The shapes of the starch granules were round to oval or angular in the four yams and the size of starch granule increased with growth time ranging from 10 to 40 μm. The X-ray diffraction patterns could be classified as typical of B-type starch for the four cultivars of yam starch. The transition temperature of gelatinization of the four yam starches decreased during maturity. The RVA parameters suggested that yam starch paste showed a lower breakdown at an early harvest time. It appeared to be thermo-stable during heating but had a high setback after cooling, which might result in a tendency towards high retrogradation. The results for pasting behaviors showed that higher amylose content was associated with a lower pasting temperature and a higher peak viscosity in these starches.     

Impact of annealing and heat-moisture treatment on rapidly digestible,slowly digestible and resistant starch levels in native and gelatinized corn,pea and lentil starches

Impact of annealing (ANN) and heat-moisture treatment (HMT) on rapidly digestible starch (RDS), slowly digestible starch (SDS), resistant starch (RS), and expected glycemic index (eGI) of corn, pea, and lentil starches in their native and gelatinized states were determined. ANN was done for 24 h at 70% moisture at temperatures 10 and 15 °C below the onset (T_o) temperature of gelatinization, while HMT was done at 30% moisture at 100 and 120 °C for 2 h. The swelling factor (SF), amylose leaching (AML) and gelatinization parameters of the above starches before and after ANN and HMT were determined. SF and AML decreased on ANN and HMT (HMT > ANN). The gelatinization temperatures increased on ANN and HMT (HMT > ANN). However, the gelatinization temperature range decreased on ANN but increased on HMT. Birefringence remained unchanged on ANN but decreased on HMT. The Fourier transform infrared (FT-IR) absorbance ratio of 1047 cm^?1/1022 cm^?1 increased on ANN but decreased on HMT. ANN and HMT increased RDS, RS and eGI levels and decreased SDS levels in granular starches. HMT had a greater impact than ANN on RDS, RS, and SDS levels. In gelatinized starches, ANN and HMT decreased RDS and eGI, but increased SDS and RS levels. These changes were more pronounced on HMT. This study showed that amylopectin structure and interactions formed during ANN and HMT had a significant impact on RDS, SDS, RS and eGI levels of starches.     

Physical, chemical and microscopic characterization of a new starch from chayote (Sechium edule) tuber and its comparison with potato and maize starches

In this work, the chayote tuber starch (CHS) was isolated and its chemical composition and its physical and microscopic characteristics were determined, and compared with potato (PS) and maize (MS) starches. The starch content in chayote tubers (728 g kg⁻¹ dry weight) was similar to potato tubers (700 g kg⁻¹ dry weight), with a high level of purity (>98%), while its phosphorous content was higher (0.15%) than PS (0.08%) and MS (0.01%). Starch granules were oval, irregular, truncated and rounded with sizes between 7 and 50 μm with smooth surfaces. CHS dispersions (1% and 4%, w/w) showed higher viscosity (75 and 1715 mPa s), than PS (350% and 50% lower) and MS (715% and 600% lower). The gelatinization temperature (65 to 74 °C) was similar in CHS and PS. The pasting properties (RVA) of the starches suggest that CHS showed better characteristics than the commercial potato and maize starches. Therefore, CHS could be used as a thickening agent and a substitute to PS in food dispersions where a high viscosity is needed.     

Starch phosphorus content in potato (Solanum tuberosum L.) cultivars and its effect on other starch properties

The research presented herein provides valuable data with respect to the phosphorus content of starches from many potato (Solanum tuberosum L.) cultivars using an energy-dispersive X-ray fluorescence technique. In all starches examined, the phosphorus content ranged from 308 to 1244 ppm. Furthermore, the estimation of the starch characteristics of representative samples differing manifestly in their phosphorus content indicated that enhancing the starch phosphate resulted in significant increases in the swelling power, peak viscosity, and breakdown and significant but small increases in the onset and peak temperatures of gelatinization. Other starch quality parameters, such as the amylose content, median granule size, and the gelatinization enthalpy, did not change significantly due to the degree of phosphate substitution of starch.     

Thermal and structural properties of unusual starches from developmental corn lines

Starches from exotic corn lines were screened by using differential scanning calorimetry (DSC) to find thermal properties that were significantly different from those exhibited by starches from normal Corn Belt lines. Two independent gelatinization transitions, one corresponding to the melting of a peak at 66 °C and the other to a peak melting at 69 °C, were found in some starches. The melting characteristics were traced to two separate types of granules within the endosperm. Strong correlations were found between DSC properties and proportion of large granules with equivalent diameter ≥17 μm. Starches with a lower peak onset gelatinization temperature (T_oG), had a lower normalized concentration of chains with a degree of polymerization (dp) of 15–24 and/or a greater normalized concentration of chains with a dp of 6–12. These studies will aid in understanding structure–thermal property relationships of starches, and in identifying corn lines of interest for commercial breeding.     

Physico-chemical and morphological characteristics of New Zealand Taewa (Maori potato) starches

The physico-chemical, morphological, thermal, pasting, textural, and retrogradation properties of the starches isolated from four traditional Taewa (Maori potato) cultivars (Karuparera, Tutaekuri, Huakaroro, Moemoe) of New Zealand were studied and compared with starch properties of a modern potato cultivar (Nadine). The relationships between the different starch characteristics were quantified using Pearson correlation and principal component analysis. Significant differences were observed among physico-chemical properties such as phosphorus content, amylose content, swelling power, solubility and light transmittance of starches from the different potato cultivars. The starch granule morphology (size and shape) for all the potato cultivars showed considerable variation when studied by scanning electron microscopy and particle size analysis. Starch granules from Nadine and Moemoe cultivars showed the presence of large and irregular or cuboid granules in fairly high number compared with the starches from the other cultivars. The transition temperatures (T_o; T_p; T_c) and the enthalpies (ΔH_gel) associated with gelatinization suggested differences in the stability of the crystalline structures among these potato starches. The Moemoe starch showed the lowest T_o, while it was higher for Tutaekuri and Karuparera starches. Pasting properties such as peak, final and breakdown viscosity and texture profile analysis (TPA) parameters of starch gels such as hardness and fracturability were found to be higher for Nadine and Huakaroro starches. The Nadine and Huakaroro starch gels also had lower tendency towards retrogradation as evidenced by their lower syneresis (%) during storage at 4 °C. Principal component analysis showed that the Tutaekuri and Nadine cultivars differed to the greatest degree in terms of the properties of their starches.     

State diagram of potato starch–water mixtures treated with high hydrostatic pressure

Potato starch–water mixture was treated with high hydrostatic pressure (HHP) of up to 1.2 GPa, and effect of starch content (10–70% (w/w)) on HHP-gelatinization was investigated by differential scanning calorimetry (DSC). Depending on the treatment pressure and potato starch content, DSC thermograms showed decrease in enthalpy change of heat gelatinization reflecting the progress of HHP-gelatinization and increase in enthalpy change of re-gelatinization of retrograded starch. From the viewpoint of the enthalpy changes, physically modified state of HHP-treated potato starch–water mixtures was classified as follows: no change, partial gelatinization, complete gelatinization, partial gelatinization and retrogradation, and complete gelatinization and retrogradation. A state diagram of potato starch–water mixtures (treatment pressure vs. starch content) was presented.     

Gelatinization mechanism of potato starch

The non-Newtonian behavior and dynamic viscoelasticity of potato starch (Jaga kids red ’90, 21.0% amylose content) solutions after storage at 25 and 4°C for 24 h were measured with a rheogoniometer. The flow curves, at 25°C, of potato starch showed plastic behavior >1.0% (w/v) after heating at 100°C for 30 min. A gelatinization of potato starch occurred above 1.0% at room temperature. A very large dynamic viscoelasticity was observed when potato starch solution (3.0%) was stored at 4°C for 24 h and stayed at a constant value with increasing temperature. A small dynamic modulus of potato starch was observed upon addition of urea (4.0 M) at low temperature (0°C) even after storage at 25 and 4°C for 24 h. A small dynamic modulus was also observed in 0.05 M NaOH solution. Possible models of gelatinization and retrogradation mechanism of potato starch were proposed.     

The impact of single and dual hydrothermal modifications on the molecular structure and physicochemical properties of normal corn starch

Effect of single and dual hydrothermal modifications with annealing (ANN) and heat-moisture treatment (HMT) on molecular structure and physicochemical properties of corn starch was investigated. Normal corn starch was modified by ANN at 70% moisture at 50 °C for 24 h and HMT at 30% moisture at 120 °C for 24 h as well as by the combination of ANN and HMT. The apparent amylose content and swelling factor (SF) decreased on ANN and HMT, but amylose leaching (AML) increased. These changes were more pronounced on dual modification. The crystallinity (determined by X-ray diffraction), the gelatinization enthalpy (determined by differential scanning calorimetry) and ratio of 1047 cm^?1/1022 cm^?1 (determined by Fourier transform infrared spectroscopy) slightly increased on ANN and decreased on HMT. The ANN and subsequent HMT (ANN-HMT) resulted in the lowest crystallinity, gelatinization enthalpy and ratio of 1047 cm^?1/1022 cm^?1. The gelatinization temperature range decreased on ANN but increased on HMT. However, the gelatinization range of dually modified starches (ANN-HMT and HMT-ANN) was between ANN starch and HMT starch. Birefringence remained unchanged on ANN but slightly decreased on HMT as well as dual modification. Average chain length and amount of longer branch chains (DP ≥ 37) remained almost unchanged on ANN but decreased on HMT and dual modifications (ANN-HMT and HMT-ANN). HMT and dual modifications resulted in highly reduced pasting viscosity. ANN and HMT as well as dual modifications increased RDS content and decreased SDS and RS content.     

A comparative study of some properties of cassava (Manihot esculenta,Crantz) and cocoyam (Colocasia esculenta,Linn) starches

Some properties of cassava and cocoyam starches were studied and compared with a view to determining the functional applications in food systems for which they are suitable. The starches were compared in terms of their microscopic, thermal, physicochemical and rheological properties. Microscopy revealed smaller granule sizes of cocoyam starch compared with cassava. The amylose content was higher in cocoyam starch (33.3%) than in cassava starch (29.3%). Gelatinization in cassava starch occurred at a lower temperature range (60.11–72.67 °C) compared with cocoyam (72.96–80.25 °C) with the endothermic gelatinization enthalpy higher in cocoyam. The swelling power and solubility patterns indicated lower relaxation temperature, higher swelling and solubilization rates in cassava starch compared with cocoyam starch. The pasting characteristics of 8% (db, dry basis) starch slurry showed that cassava had higher peak viscosity but lower stability and setback ratios compared with cocoyam. This indicates that cocoyam starch paste is better in withstanding processing conditions and would present a superior thickening characteristic than cassava starch paste. The flow properties of both starch pastes showed non-Newtonian behaviour and could be best described by the Herschel–Bulkley model. The rate index and yield stress of cocoyam starch paste was higher than that of cassava. The storage modulus of cocoyam starch paste was higher than that of cassava indicating that cocoyam starch paste was more rigid than cassava starch paste. Cassava starch paste exhibited higher paste clarity and freeze-thaw stability than cocoyam starch paste. The properties of cassava and cocoyam starches dictate their food applications.     

RVA analysis of mixtures of wheat flour and potato, sweet potato, yam, and cassava starches

Rapid visco analysis (RVA) was performed to study the pasting properties of mixtures of wheat flour and tuber starches, i.e., potato starch (PS), sweet potato starch (SPS), yam starch (YS), and cassava starch (CS), at 10–50% starch in the mixtures. Lower phosphorus and higher amylose contents were observed in CS, followed by YS, SPS, and PS. The peak, breakdown, final, and setback viscosities of the control wheat flour were lower than those of the control PS, SPS, YS, and CS. The peak viscosity of wheat–PS mixtures was higher than those of the wheat–SPS, wheat–YS, and wheat–CS because of the higher phosphorus and lower amylose content of PS, which resulted in higher swelling of PS than that of SPS, YS, and CS. The breakdown viscosities increased as the starch content of the PS, SPS, and CS in the mixtures increased to up to the 50%, and the values tended to decrease in the wheat–YS mixture. The setback viscosities of wheat–SPS, wheat–YS, and wheat–CS increased significantly as the starch content increased from 10% to 50%, and that of wheat–PS dropped dramatically at 50%. The findings in this work provide evidence that tuber starches could be used as a partial substitute for wheat flour in some wheat-based products.     

Sequence dependent hydration of DNA

The transitions between the different helical conformations of DNA depend on the base sequence and the ambient conditions such as humidity and counter-ion concentration. In this study energy minimization techniques have been used to locate water molecule sites around nucleotides especially those which form hydrogen bonds between two or more nucleotide atoms and thus form solvent mediated bridges. We have studied several sequences and find that those which are known not to exist in the low hydration ‘A’ form have very similar number of bridging sites in both ‘A’ and ‘B’ conformations. Those sequences which are found in the ‘A’ conformation have considerably more bridging sites in this low hydration form than in the ‘B’ conformation. Sequence related solvent effects for a given conformation have also been analysed.     

The influence of amylose and amylopectin characteristics on gelatinization and retrogradation properties of different starches

Physico-chemical properties of starch from wheat, rye, barley (waxy, high-amylose and normal-amylose), waxy maize, pea and potato (normal-amylose and high-amylopectin) were studied. Emphasis was given to the amylose (total, apparent and lipid-complexed) and amylopectin characteristics as well as to the gelatinization and retrogradation properties measured using differential scanning calorimetry. The total amylose content varied from ca. 1 % for waxy maize to 37% for high-amylose barley. The amylopectin characteristics were determined by high-performance size-exclusion chromatography after debranching with isoamylase. The weight-average degree of polymerization ( _w) was 26, 33 and 27 for the A-, B-, and C-type starches, respectively. In general, the potato starches exhibited the highest retrogradation enthalpies and the cereal starches the lowest, while the pea starch showed an intermediate retrogradation enthalpy. The data were analysed by principal component analysis (PCA). The _w showed positive correlation to the melting interval, the peak minimum, the offset temperatures of the retrogradation-related endotherm as well as to the gelatinization and retrogradation enthalpies. However, the high-amylose barley retrograded to a greater extent than the other cereal starches, despite low _w (24). The amylose content was negatively correlated to the onset and the peak minimum temperatures of gelatinization.