Human chromosome 17 NotI linking clones and their use in long-range restriction mapping of the Miller-Dieker chromosome region (MDCR) in 17p13.3

A NotI linking library constructed from flow-sorted human chromosome 17 material was screened to aid in construction of a long-range restriction map of the Miller-Dieker chromosome region (MDCR) in 17p13.3. A total of 66 clones were mapped to one of eight regions of chromosome 17 using a somatic cell hybrid panel, and 44/66 (67%) of these clones cross-hybridized to rodent DNA on Southern blots. Of these, 24 clones were tested and all mapped to mouse chromosome 11, the homolog of human chromosome 17. Four linking clones mapped to 17p13.3 and were used for pulsed-field gel electrophoresis studies along with six other anonymous probes previously mapped to this region. Clone L132 was found to be deleted in all Miller-Dieker patients tested (n = 15) and therefore lies within the critical region for this disorder. It detects two NotI fragments (180 and 320 kb), one of which (320 kb) was shared by YNZ22 and YNH37, two probes previously shown to be co-deleted in all patients with the Miller-Dieker syndrome (MDS). These results indicate that all MDS patients share a minimum deletion region of greater than 370 kb. Two other NotI clones, L53 and L125, mapped telomeric to the MDS critical region and share a 600-kb MluI fragment with each other and with YNZ22/YNH37. This provides a 930-kb MluI map that encompasses the distal boundary of the MDS critical region but does not include the proximal boundary. A total of over 2 Mbp is represented in the MluI fragments by probes in subband p13.3, a cytogenetic region estimated to be 3-4 Mbp.     

Molecular cloning and DNA sequencing of the radC gene of Escherichia coli K-12.

The radC102 mutation that sensitizes E. coli K-12 cells to ultraviolet light, ionizing radiations and alkylating agents was localized between the fpg and pyrE genes at 81.7 min on the bacterial chromosome. E. coli strain BH20 (radC+, fpg-1::KnR) has a 10.5-kb EcoRI/KpnI DNA fragment spanning the region from pyrE to the insertion mutation fpg-1::KnR. The proximity of the radC gene to this insertion mutation provided a strategy to isolate the radC+ gene based on the cloning of radC+ and fpg-1::KnR on the same DNA fragment using the resistance to kanamycin as a selector. A library of EcoRI/KpnI DNA fragments of E. coli strain BH20 was inserted into pUC19. One recombinant plasmid conferring resistance to kanamycin was selected and named pRCV10. The pRCV10 plasmid partially restores the resistance to UV-radiation when transformed into SR1187 (radC102), but sensitizes the wild-type strain to the same treatment. The radC102 complementing region was localized on a 1.2-kb BglII/BglII DNA fragment which was sequenced. The DNA sequence complementing the radC102 mutation contained an ATG translation start codon with an open reading frame of 297 base pairs which encodes a polypeptide of Mr 11,500. The order of the genes in this region of the E. coli chromosome is: fpg--rpmBG--radC--pyrE.     

Cloning and characterization of the histidine biosynthetic gene cluster of Streptomyces coelicolor A3(2)

Biochemical and genetic data indicate that in Streptomyces coelicolor A3(2) the majority of the genes involved in the biosynthesis of histidine are clustered in a small region of the chromosome [Carere et al., Mol. Gen. Genet. 123 (1973) 219-224; Russi et al., Mol. Gen. Genet. 123 (1973) 225-232]. To investigate the structural organization and the regulation of these genes, we have constructed genomic libraries from S. coelicolor A3(2) in pUC vectors. Recombinant clones were isolated by complementation of an Escherichia coli hisBd auxotroph. A recombinant plasmid containing a 3.4-kb fragment of genomic DNA was further characterized. When cloned in the plasmid vector, pIJ699, this fragment was able to complement S. coelicolor A3(2) hisB mutants. Overlapping clones spanning a 15-kb genomic region were isolated by screening other libraries with labeled DNA fragments obtained from the first clone. Derivative clones were able to complement mutations in four different cistrons of the his cluster of S. coelicolor A3(2). Nucleotide sequence analysis of a 4-kb region allowed the identification of five ORFs which showed significant homology with the his gene products of E. coli. The order of the genes in S. coelicolor A3(2) (5'--hisD-hisC-hisBd-hisH-hisA-3') is the same as in the his operon of E. coli.     

Physical Analysis of the Terminal 270 kb of DNA from Human Chromosome 1q

DNA from three 1q44-derived human telomeric yeast artificial chromosome clones was analyzed using physical mapping methods. The smallest clone, yRM2004 (65 kb), corresponded exactly to the distal end of the largest clone, yRM2123 (270 kb). The third clone, yRM2192, overlapped with the proximal end of yRM2123 but not the distal end, suggesting that it is most likely a deletion artifact of a clone originally derived from a 1q telomere fragment. Data from fluorescence in situ hybridization analysis, restriction mapping, and RecA-assisted restriction enzyme cleavage experiments indicate that the molecular clone yRM2123 contains a 260-kb DNA fragment colinear with a genomic telomere-terminal fragment from 1q. yRM2123 contains low-copy subtelomeric and subterminal repeats at its distal end, single-copy DNA more centromerically, and a CG-rich region with homology to mouse DNA. Markers derived from this clone will allow telomeric closure of the physical and genetic linkage maps of human chromosome 1q.     

A new polymorphic locus, D7S411, isolated by cloning from preparative pulse-field gels is close to the mutation causing cystic fibrosis

The mutation causing cystic fibrosis (CF) has been localized to the DNA sequence of 700 kb bounded by the loci identified by the markers pMP6d-9 (D7S399) and pJ3.11 (D7S8). A 560-kb fragment obtained after SacII digestion of DNA from a cell line containing this region of human chromosome 7 in a mouse background was separated using pulse-field gel electrophoresis and isolated from the gel. The DNA was digested with BamHI prior to cloning into lambda EMBL3. Approximately 0.1% of the resulting clones contained human repetitive sequences, and 24 such recombinants were studied. Of these, 23 are on chromosome 7; 8 clones were duplicated, and of the 15 different recombinants, 7 are between MET and INT1L1, and a further 7 are between INT1L1 and pMP6d-9, leaving a single marker, pG2, which is between pMP6d-9 and pJ3.11. pG2 recognizes an RFLP with XbaI. A cosmid walk from pG2 has generated a further marker, H80, which recognizes an RFLP with PstI. This new locus (D7S411) divides the remaining region between the CF flanking markers, thereby making it more accessible to fine pulse-field mapping and allowing the precise localization of further clones to this region. Although it is not possible to position the CF locus unequivocally with respect to D7S411, both polymorphic markers at this locus exhibit low but significant linkage disequilibrium with CF, placing the emphasis for the search for the gene on the D7S399 to D7S411 interval of 250 kb.     

Expression of the cytochrome b-URF6-URF5 region of the mouse mitochondrial genome

The nature of RNA coded by the only light-strand (L-strand) open-reading frame unidentified reading frame 6 (URF6) was studied by using a variety of single- and double-strand DNA subclones derived from the 3.6-kilobase (kb) cytochrome b (cyt b)-URF5 coding region of the mouse mitochondrial genome. Northern blot experiments using single-strand-specific M13 clones indicate that both the heavy (H) and L strands of this genomic region are symmetrically transcribed and processed into poly(adenylic acid) [poly(A)] RNAs of comparable size. The 1.2- and 2.4-kb RNAs coded by the H strand, putative mRNAs for cyt b and URF5 reading frames, respectively, are derived from a common precursor of 3.6-kb RNA. The L-strand-coded 1.15-kb RNA, on the other hand, is derived from a short-lived precursor of 3.6-kb RNA by a multiple-step processing involving a 2.4-kb intermediate RNA. The S1 nuclease protection experiments using both the 3'- or 5'-end-labeled DNA probes and also affinity-purified 32P-labeled RNA probes indicate that the 1.15-kb RNA maps between the start of the URF6 reading frame (3' end) and a region 590-600 nucleotides to the 5' end of this reading frame. The 1.15-kb RNA thus contains the entire URF6 coding sequence and an about 590-nucleotide-long 3' untranslated region. The molar abundance of the three mRNAs in the steady-state mitochondrial RNA varies markedly. The 1.15-kb URF6 mRNA is only one-tenth the level of 1.2-kb cyt b mRNA, although it is nearly as abundant as the 2.4-kb URF5 mRNA.(ABSTRACT TRUNCATED AT 250 WORDS)     

Identification and cloning of the conjugative transfer region of Staphylococcus aureus plasmid pGO1.

The conjugative transfer (tra) genes of a 52-kilobase (kb) staphylococcal plasmid, pGO1, were localized by deletion analysis and transposon insertional inactivation. All transfer-defective (Tra-) deletions and Tn551 or Tn917 transposon insertions occurred within a 14.5-kb BglII fragment. Deletions and insertions outside this fragment all left the plasmid transfer proficient (Tra+). The tra region was found to be flanked by directly repeated DNA sequences, approximately 900 base pairs in length, at either end. Clones containing the 14.5-kb BglII fragment (pGO200) and subclones from this fragment were constructed in Escherichia coli on shuttle plasmids and introduced into Staphylococcus aureus protoplasts. Protoplasts could not be transformed with pGO200E (pGO200 on the staphylococcal replicon, pE194) or subclones containing DNA at one end of the tra fragment unless pGO1 or specific cloned tra DNA fragments were present in the recipient cell. However, once stabilized by sequences present on a second replicon, each tra fragment could be successfully introduced alone into other plasmid-free S. aureus recipients by conjugative mobilization or transduction. In this manner, two clones containing overlapping fragments comprising the entire 14.5-kb BglII fragment were shown to complement each other. The low-frequency transfer resulted in transconjugants containing one clone intact, deletions of that clone, and recombinants of the two clones. The resulting recombinant plasmid (pGO220), which regenerated the tra region intact on a single replicon, transferred at frequencies comparable to those of pGO1. Thus, all the genes necessary and sufficient for conjugative transfer of pGO1 are contained within a 14.5-kb region of DNA.     

Engineering large fragment insertions into the chromosome of Escherichia coli

An effective DNA replacement system has been established for engineering large fragment insertions into the chromosome of Escherichia coli. The DNA replacement plasmid, pHybrid I, was first constructed based on the bacterial artificial chromosome (BAC) vector. Two fragments of the E. coli genome, 5.5 and 6.5 kb in length, were introduced into the vector for homologous recombination. In addition to the chloramphenicol gene, a second gene neo was introduced for double marker screening for recombinant clones. By shot-gun cloning and homologous recombination techniques, using our new recombinant vector (pHybrid I), a 20-kb fragment from Lactococcus lactis genomic DNA has been successfully integrated into the chromosome of the E. coli strain J93-140. Plating tests and PCR amplification indicated that the integration remained stable after many generations in cell culture. This system will be especially useful for the chromosome engineering of large heterologous fragment insertions, which is necessary for pathway engineering.     

Targeted isolation of simple sequence repeat markers through the use of bacterial artificial chromosomes

 Simple sequence repeats (SSRs) are versatile DNA markers that are readily assayed and highly informative. Unfortunately, non-targeted approaches to SSR development often leave large genomic regions without SSR markers. In some cases these same genomic regions are already populated by other types of DNA markers, especially restriction fragment length polymorphisms (RFLPs), random amplified polymorphic DNAs (RAPDs), and amplified fragment length polymorphisms (AFLPs). To identify SSR markers in such regions, bacterial artificial chromosome (BAC) clones can be used as intermediaries. First, one or more BAC clones in a region of interest are identified through the use of an existing DNA marker. BAC clones uncovered in this initial step are then used to create a small insert DNA library that can be screened for the presence of SSR-containing clones. Because BAC inserts are often 100-kb pairs or more in size, most contain one or more SSRs. This strategy was applied to two regions of the soybean genome near genes that condition resistance to the soybean cyst nematode on molecular linkage groups G and A2. This targeted approach to identifying new DNA markers can readily be extended to other types of DNA markers, including single nucleotide polymorphisms. Received: 13 August 1998 / Accepted: 13 October 1998     

Establishment of bovine chromosome region specific high resolution maps using microdissection

An alternative approach for the direct analysis of chromosome regions corresponding to economical traits on the basis of chromosome microdissection is described. Large fragment clones isolated with primer pairs designed from chromosome fragment-specific DNA sequences were localized by FISH to the scraped chromosome region of interest. The chromosome fragment-specific clones are a useful tool for the generation of region specific high density marker and gene maps and represent the source material for the development of a DNA contig including the economical trait.     

Mapping of the goat beta-globin gene cluster to a region of chromosome 7 by in situ hybridization

We mapped the beta-globin gene cluster of the goat (Capra hircus) to a specific chromosomal region of the species, using in situ hybridization. The probe we used was a 1.2-kb Eco RI/Bam HI genomic DNA fragment that was 3H labeled to high specific activity by the random primer method. This DNA fragment contains part of the 5' flanking region and the first two exons of the epsilon IV gene of the goal beta-globin gene cluster. Our results show that this gene cluster is on chromosome 7 in the region of bands 33 to 35 based on BrdU G-banded chromosome preparations of this species.     

Construction of a YAC library from a Beta vulgaris fragment addition and isolation of a major satellite DNA cluster linked to the beet cyst nematode resistance locus Hs1 pat−1

A YAC library was constructed from the Beta vulgaris fragment addition AN5-203b. This monosomic fragment addition harbors an approximate 12-Mbp fragment of B.patellaris chromosome 1 accomodating the Hs1 ^pat-1 conferring resistance to the beet cyst nematode (Heterodera schachtii). The YAC library consists of 20,000 YAC clones having an average size of 140 kb. Screening with organelle-specific probes showed that 12% of the clones contain chloroplast DNA while only 0.2% of the clones hybridizes with a mitochondrial specific probe. On the basis of a sugar beet haploid genome size of 750 Mbp this library represents 3.3 haploid genome equivalents. The addition fragment present in AN5-203b harbors a major satellite DNA cluster that is tightly linked to the Hs1 ^pat-1 locus. The cluster is located on a single 250-kb EcoRI restriction fragment and consists of an estimated 700–800 copies of a 159-bp core sequence, most of which are arranged in tandem. Using this core sequence as a probe, we were able to isolate 1 YAC clone from the library that contains the entire 250-kb satellite DNA cluster.Abbreviations YAC Yeast artificial chromosome - BCN beet cyst nematode - RAPD random amplified polymorphic DNA - RFLP restriction fragment length polymorphism     

Specific initiation at an origin of replication from Schizosaccharomyces pombe.

Using a genetic assay for efficient autonomous replication, we have isolated from Schizosaccharomyces pombe a 6.2-kb fragment which shows the properties expected of an origin of DNA replication in S. pombe. A 2.8-kb subclone of the fragment has the same replication properties. Two-dimensional gel analysis of replication intermediates throughout plasmids carrying the 6.2- or 2.8-kb fragments shows that replication initiates only in a specific region, which can be localized to within several hundred base pairs, in the fragments. This region is also a site of replication initiation in the S. pombe chromosome where the fragments normally reside. These results provide strong evidence that initiation of replication in S. pombe is localized and mediated by specific DNA sequence signals.     

Cloning and organization of genes for 5S ribosomal RNA in the sea urchin. Lytechinus variegatus

A 1.35-kb EcoRI fragment of Lytechinus variegatus DNA containing a single 5S rRNA gene has been cloned into the plasmid vector pACYC184. Four clones from different transformation experiments contain 5S rDNA inserts of about the same size and have the same restriction enzyme digestion patterns for the enzymes HaeIII, HinfI, HhaI, and AluI. One EcoRI site near the HindIII site of the plasmid vector pACYC184 is missing in all the four clones. By DNA sequencing, the missing EcoRI ws found to be EcoRI site, d(AAATTN)d(TTTAAN) in pLu103, one of the four 5S rDNA clones. The structure of pLu103 was determined by restriction mapping and blot hybridization. Three restriction fragments, 1.0-kb HaeIII/HaeIII, 0.375-kb AluI/AluI and 0.249-kb MboII/MboII, which contain the 5S rRNA coding region, have been subcloned into the EcoRI site of the plasmid pACYC184. The organization of 5S rRNA genes in the sea urchin genome was also investigated. It was found that restriction endonuclease HaeIII has a single recognition site within each 5S rDNA repeat, and yields two fragment lengths, 1.2 and 1.3 kb. The behavior of these 5S rRNA genes when total L. variegatus DNA is partially digested with HaeIII is consistent with an arrangement of 5S rRNA genes in at least two tandemly repeated, non-interspersed families. Both the coding region and spacer region of the 5S rRNA gene in pLu103 hybridize to 1.2 and 1.3-kb rDNA families. This indicates that the cloned EcoRI fragment of 5S rDNA in pLu103 represents one single repeat of 5S rDNA in the genome.     

Construction of miniplasmids from the 7.2-kb and 5.1-kb penicillinase-producing plasmids of Neisseria gonorrhoeae reveals two replication regions

Two replication regions have been identified on a 7.2-kb penicillinase-producing plasmid (pJD4) of Neisseria gonorrhoeae. Through construction of mini-plasmids, one replication region of pJD4 was located on a 1.5-kb fragment, designated region "a," that included the unique HindIII site of this plasmid. This region is absent from the 5.1-kb naturally occurring gonococcal penicillinase-producing plasmid (pJD5) which is considered to be a deletion-derivative of the 7.2-kb plasmid. A 1.5-kb fragment (region "b"), part of a 2.5-kb fragment essential for the replication of the 5.1-kb plasmid (pJD5), was found to be responsible for incompatibility. Incompatibility studies showed that in vitro-derived deletion-derivatives from pJD4 and pJD5 containing either region "a" or region "b" were compatible. The DNA sequence of part of region "a" showed that this region was A-T rich. It contained seven sets of A-T rich multiple direct repeats and two putative dnaA boxes, suggesting that the mechanism of replication of region "a" was similar to that of OriC in Escherichia coli.