Shear modulation of intercellular contact area between two deformable cells colliding under flow

Shear rate has been shown to critically affect the kinetics and receptor specificity of cell-cell interactions. In this study, the collision process between two modeled cells interacting in a linear shear flow is numerically investigated. The two identical biological or artificial cells are modeled as deformable capsules composed of an elastic membrane. The cell deformation and trajectories are computed using the immersed boundary method (IBM) for shear rates of 100-400s(-1). As the two cells collide under hydrodynamic shear, large local cell deformations develop. The effective contact area between the two cells is modulated by the shear rate, and reaches a maximum value at intermediate levels of shear. At relatively low shear rate, the contact area is an enclosed region. As the shear rate increases, dimples form on the membrane surface, and the contact region becomes annular. The nonmonotonic increase of the contact area with the increase of shear rate from computational results implies that there is a maximum effective receptor-ligand binding area for cell adhesion. This finding suggests the existence of possible hydrodynamic mechanism that could be used to interpret the observed maximum leukocyte aggregation in shear flow. The critical shear rate for maximum intercellular contact area is shown to vary with cell properties such as radius and membrane elastic modulus.     

Disruption and de novo formation of nanotubular membrane extensions in SW620 colon carcinoma cell line during cell division

A novel biological principle of cell-to-cell interaction based on membrane continuity of nanotubular channels has recently been described. These contacts are extremely dynamic and sensitive to mechanical stress, which causes their rapid breakage and retraction. Here we demonstrate that functional mechanical stress generated during cell division can disrupt membrane nanotubes, which are formed de novo when filopodia-like projections on one cell make contact with a neighbouring cell, using the SW620 colon carcinoma cell line. Considering the general principal of decreasing cell-cell interactions during tumour progression, our observation is appealing because this new phenomenon may be valid for neoplastic cells.     

Model answers to lipid membrane questions

Ever since it was discovered that biological membranes have a core of a bimolecular sheet of lipid molecules, lipid bilayers have been a model laboratory for investigating physicochemical and functional properties of biological membranes. Experimental and theoretical models help the experimental scientist to plan experiments and interpret data. Theoretical models are the theoretical scientist's preferred toys to make contact between membrane theory and experiments. Most importantly, models serve to shape our intuition about which membrane questions are the more fundamental and relevant ones to pursue. Here we review some membrane models for lipid self-assembly, monolayers, bilayers, liposomes, and lipid-protein interactions and illustrate how such models can help answering questions in modern lipid cell biology.     

Membrane dynamics correlate with formation of signaling clusters during cell spreading

The morphology and duration of contacts between cells and adhesive surfaces play a key role in several biological processes, such as cell migration, cell differentiation, and the immune response. The interaction of receptors on the cell membrane with ligands on the adhesive surface leads to triggering of signaling pathways, which allow cytoskeletal rearrangement, and large-scale deformation of the cell membrane, which allows the cell to spread over the substrate. Despite numerous studies of cell spreading, the nanometer-scale dynamics of the membrane during formation of contacts, spreading, and initiation of signaling are not well understood. Using interference reflection microscopy, we study the kinetics of cell spreading at the micron scale, as well as the topography and fluctuations of the membrane at the nanometer scale during spreading of Jurkat T cells on antibody-coated substrates. We observed two modes of spreading, which were characterized by dramatic differences in membrane dynamics and topography. Formation of signaling clusters was closely related to the movement and morphology of the membrane in contact with the activating surface. Our results suggest that cell membrane morphology may be a critical constraint on signaling at the cell-substrate interface.     

Cell membrane alignment along adhesive surfaces: contribution of active and passive cell processes

Cell adhesion requires nanometer scale membrane alignment to allow contact between adhesion receptors. Little quantitative information is presently available on this important biological process. Here we present an interference reflection microscopic study of the initial interaction between monocytic THP-1 cells and adhesive surfaces, with concomitant determination of cell deformability, using micropipette aspiration, and adhesiveness, using a laminar flow assay. We report that 1), during the first few minutes after contact, cells form irregular-shaped interaction zones reaching approximately 100 micro m(2) with a margin extension velocity of 0.01-0.02 micro m/s. This happens before the overall cell deformations usually defined as spreading. 2), These interference reflection microscopic-detected zones represent bona fide adhesion inasmuch as cells are not released by hydrodynamic forces. 3), Alignment is markedly decreased but not abolished by microfilament blockade with cytochalasin or even cell fixation with paraformaldehyde. 4), In contrast, exposing cells to hypotonic medium increased the rate of contact extension. 5), Contacts formed in presence of cytochalasin, after paraformaldehyde fixation or in hypotonic medium, were much more regular-shaped than controls and their extension matched cell deformability. 6), None of the aforementioned treatments altered adhesiveness to the surface. It is concluded that adhesive forces and passive membrane deformations are sufficient to generate initial cell alignment to adhesive surfaces, and this process is accelerated by spontaneous cytoskeletally-driven membrane motion.     

A Candida albicans cell wall‐linked protein promotes invasive filamentation into semi‐solid medium

Growth of cells in contact with an abiotic or biological surface profoundly affects cellular physiology. In the opportunistic human pathogen, Candida albicans, growth on a semi‐solid matrix such as agar results in invasive filamentation, a process in which cells change their morphology to highly elongated filamentous hyphae that grow into the matrix. We hypothesized that a plasma membrane receptor‐type protein would sense the presence of matrix and activate a signal transduction cascade, thus promoting invasive filamentation. In this communication, we demonstrate that during growth in contact with a semi‐solid surface, activation of a MAP kinase, Cek1p, is promoted, in part, by a plasma membrane protein termed Dfi1p and results in invasive filamentation. A C. albicans mutant lacking Dfi1p showed reduced virulence in a murine model of disseminated candidiasis. Dfi1p is a relatively small, integral membrane protein that localizes to the plasma membrane. Some Dfi1p molecules become cross‐linked to the carbohydrate polymers of the cell wall. Thus, Dfi1p is capable of linking the cell wall to the plasma membrane and cytoplasm.     

Differentiation in Acanthamoeba castellanii is induced by specific monoclonal antibodies

Monoclonal antibodies that bind a large molecular weight plasma membrane protein of Acanthamoeba castellanii cause the cells to differentiate. A different monoclonal antibody that binds specifically to the major plasma membrane protein has no effect upon cell division or differentiation. The induction of differentiation by the monoclonal antibodies requires a bivalent attachment, more than a single binding cycle of the antibody to the plasma membrane protein, does not require cell-cell contact, and appears to be mediated by an inhibition of pinocytosis. These results suggest one of two alternatives: either this free living amoeba possesses a cell surface receptor that serves to initiate the differentiation process when stimulated, or the specific plasma membrane antigen for the differentiation-inducing monoclonal antibodies is an essential component of the pinocytotic mechanism. While it seems more likely on the basis of available evidence that we are observing the biological effects of a cell surface receptor, either of the two alternative circumstances open up investigative areas of large significance.     

Proteolytic activity of specialized surface protrusions formed at rosette contact sites of transformed cells

Surface protrusions at the leading edge of a moving cell that make contact with the surrounding extracellular matrix (ECM) are its main motor for locomotion and invasion. Chicken embryonic fibroblasts transformed by Rous sarcoma virus (RSV-CEF) form specialized membrane rosette-shaped contact sites on planar substrata as shown by interference reflection microscopy (IRM). Such activity is lacking in normal cells. These rosette contacts are more labile than other adhesion sites, such as focal and close contacts. Ultrastructural studies demonstrate that rosettes are sites at which membrane protrusions from the ventral cell surface contact the substratum. These protrusions are filled with meshworks of microfilaments and contain the pp60src oncogene product, actin, vinculin, and alpha-actinin. However, unlike focal contacts, at the rosettes these proteins interact to extend a highly motile membrane. Rosettes have the biological activity of degrading ECM components, as demonstrated by (1) local degradation of fibronectin substrata at sites of rosette contacts, but not focal and close contacts; (2) localization of putative antiprotease antibody at sites of rosette contacts, but not at focal an close contacts; and (3) local disruption of fibronectin matrix at sites of protrusive activity seen by transmission electron microscopy (TEM). In addition, formation of the rosette contact is insensitive to the ionophore monensin, and to inhibitors of proteolytic enzymes, while local fibronectin degradation at rosette contacts is inhibited by inhibitors of metalloproteases, 1,10-phenanthroline and NP-20. I consider these membrane protrusions of the rosette contacts in RSV-transformed cells specialized structural entities--invadopodia--that are involved in the local degradation of the ECM.     

GUV preparation and imaging: Minimizing artifacts

The components of biological membranes are present in a physical mixture. The nonrandom ways that the molecules of lipids and proteins mix together can strongly influence the association of proteins with each other, and the chemical reactions that occur in the membrane, or that are mediated by the membrane. A particular type of nonrandom mixing is the separation of compositionally distinct phases. Any such phase separation would result in preferential partition of some proteins and lipids between the coexisting phases, and thus would influence which proteins could be in contact, and whether a protein could find its target. Phase separation in a plasma membrane would also influence the binding of molecules from outside the cell to the membrane, including recognition proteins on viruses, bacteria, and other cells. The concept of these and other events associated with membrane phase separation are sometimes grouped together as the “raft model” of biological membranes. Several types of experiments are aimed at detecting and characterizing membrane phase separation. Visualizing phase separation has special value, both because the immiscibility is so decisively determined, and also because the type of phase can often be identified. The fluorescence microscope has proven uniquely useful for yielding images of separated phases, both in certain cell preparations, and especially in models of cell membranes. Here we discuss ways to prepare useful model membranes for image studies, and how to avoid some of the artifacts that can plague these studies.     

Neuroglian-mediated cell adhesion induces assembly of the membrane skeleton at cell contact sites

The protein ankyrin links integral membrane proteins to the spectrin- based membrane skeleton. Ankyrin is often concentrated within restricted membrane domains of polarized epithelia and neurons, but the mechanisms responsible for membrane targeting and its segregation within a continuous lipid bilayer remain unexplained. We provide evidence that neuroglian, a cell adhesion molecule related to L1 and neurofascin, can transmit positional information directly to ankyrin and thereby polarize its distribution in Drosophila S2 tissue culture cells. Ankyrin was not normally associated with the plasma membrane of these cells. Upon expression of an inducible neuroglian minigene, however, cells aggregated into large clusters and ankyrin became concentrated at sites of cell-cell contact. Spectrin was also recruited to sites of cell contact in response to neuroglian expression. The accumulation of ankyrin at cell contacts required the presence of the cytoplasmic domain of neuroglian since a glycosyl phosphatidylinositol- linked form of neuroglian failed to recruit ankyrin to sites of cell- cell contact. Double-labeling experiments revealed that, whereas ankyrin was strictly associated with sites of cell-cell contact, neuroglian was more broadly distributed over the cell surface. A direct interaction between neuroglian and ankyrin was demonstrated using yeast two-hybrid analysis. Thus, neuroglian appears to be activated by extracellular adhesion so that ankyrin and the membrane skeleton selectively associate with sites of cell contact and not with other regions of the plasma membrane.     

Studies on the induction and expression of T cell-mediated immunity. VIII. Effector-target junctions and target cell membrane disruption during cytolysis.

Target cell destruction following contact of the target cell by specific alloimmune cytotoxic thymus-derived lymphocytes (CTL) has been examined by time-lapse film (TLF), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Effector-target conjugates of murine CTL with leukemia cells were prepared for use in these studies. TLF shows that contact of the two cells results in tumor cell zeosis involving violent membrane blebbing, and subsequent tumor cell death. TEM of the contact region shows that the CTL-tumor cell junction is extremely adherent. Examination of conjugates incubated at 37 °C to permit tumor cell lysis shows tumor cell membrane stretching and rupture, and tumor cell membrane fragments adhering to CTL. Close examination of the contact region has revealed electron-lucent junctions spanning the gap between the two cell membranes, but no packaging or secretory apparatus was prominent. The results are consistent with the mechanism of cell-mediated cytolysis being a membrane phenomenon involving junctions connecting the CTL and target cell and the initial target cell lesion observable as a stretching and rupture. The shear force of vigorous cell movements is most likely responsible for this target membrane tearing, creating a target cell lesion which results in loss of osmotic integrity and cell death.     

Mechanics of spreading cells probed by atomic force microscopy

Cellular adhesion and motility are fundamental processes in biological systems such as morphogenesis and tissue homeostasis. During these processes, cells heavily rely on the ability to deform and supply plasma membrane from pre-existing membrane reservoirs, allowing the cell to cope with substantial morphological changes. While morphological changes during single cell adhesion and spreading are well characterized, the accompanying alterations in cellular mechanics are scarcely addressed. Using the atomic force microscope, we measured changes in cortical and plasma membrane mechanics during the transition from early adhesion to a fully spread cell. During the initial adhesion step, we found that tremendous changes occur in cortical and membrane tension as well as in membrane area. Monitoring the spreading progress by means of force measurements over 2.5 h reveals that cortical and membrane tension become constant at the expense of excess membrane area. This was confirmed by fluorescence microscopy, which shows a rougher plasma membrane of cells in suspension compared with spread ones, allowing the cell to draw excess membrane from reservoirs such as invaginations or protrusions while attaching to the substrate and forming a first contact zone. Concretely, we found that cell spreading is initiated by a transient drop in tension, which is compensated by a decrease in excess area. Finally, all mechanical parameters become almost constant although morphological changes continue. Our study shows how a single cell responds to alterations in membrane tension by adjusting its overall membrane area. Interference with cytoskeletal integrity, membrane tension and excess surface area by administration of corresponding small molecular inhibitors leads to perturbations of the spreading process.     

Influence of cell cycle and cell movement on the distribution of intramembranous particles in contact-inhibited and transformed cells

Freeze fracture ultrastructure studies have shown that contact inhibited 3T3 cells contain aggregated intramembranous particles (IMP) while transformed 3T3 cells have randomly distributed IMP. The results of this study show that the aggregation of IMP in 3T3 cells is primarily related to the degree of cell contact and not significantly affected by inhibition of cell movement. Cell cycle studies do, however, show a transient disaggregation of IMP during the mitotic phase of the cell cycle. These observations are interpreted to suggest that changes in membrane structure which occur during mitosis or following cell-to-cell contact may be associated with changes in membrane fluidity and the activity of membrane enzymes that appear to be critical for control of cell growth and cell division.     

The protein coat in membrane fusion: lessons from fission

Multiple cell biological processes involve two opposite rearrangements of membrane configuration, referred to as fusion and fission. While membrane intermediates in protein-mediated fusion have been studied in some detail, the global force which drives sequential stages of the fusion reaction from early local intermediates to an expanding fusion pore remains unknown. Fusion proceeds via stages, which are analogous but in the opposite direction to that of membrane budding-off and fission driven by protein coats. On the basis of this analogy, we propose that an interconnected coat formed by membrane-bound activated fusion proteins surrounding the membrane contact zone generates the driving force for fusion. This fusion protein coat has a strongly curved intrinsic shape opposite to that of the protein coat driving fission. To relieve internal stresses, the fusion protein coat spontaneously bends out of the initial shape of the membrane surface. This bending produces elastic stresses in the underlying lipid bilayer and drives its fusion with the apposing membrane. The hypothesis that 'bystander' proteins (i.e. fusion proteins outside the contact zone) generate the driving force for fusion offers a new interpretation for a number of known features of the fusion reaction mediated by the prototype fusion protein, influenza hemagglutinin, and might bring new insights into mechanisms of other fusion reactions.     

Advancing science and technology via 3D culture on basement membrane matrix

Many cells in tissues are in contact with a highly specialized extracellular matrix, termed the basement membrane. Basement membranes have certain common components, including collagen IV, laminins, heparan sulfate proteoglycans, and growth factors which have a wide variety of biological activities. Extracts of basement membrane‐rich tissue have yielded material suitable for studying cell–basement membrane interactions. Cells cultured in a 3D basement membrane matrix allow the in vitro modeling of cell behavior, including differentiation, apoptosis, steps in capillary formation, cancer growth, invasion, etc. It has also led to the development of widely used assays for invasion and angiogenesis and more recently for tumor cell dormancy. Importantly, stem cell culture in 3D basement membrane matrices has provided important advances that allow for expansion of these cells in feeder layer‐free cultures and for studying their differentiation. 3D basement membrane culture has allowed the molecular dissection of pathways and genes important in differentiation, aided in the identification of progenitor cells, and led to the development of tissue constructs which may be models for regenerative medicine. This review will outline how this technology has led to important research assays and findings that have advanced our understanding of tissue development and disease and aided in the preclinical development of various therapeutics. J. Cell. Physiol. 221: 18–25. Published 2009 Wiley‐Liss, Inc.     

Three-dimensional discrete element method for the prediction of protoplasmic seepage through membrane in a biological cell

This paper presents a three-dimensional and compressible biological cell model based on discrete element method using multiple interacting agent that represent cellular structures within a simulated environment. The cytoplasm and nucleoplasm fluid behavior in the cell is time dependent. When taking this approach, it is important to calibrate protoplasmic flow behaviors through simulation techniques such as compressing the cell and examining the agents representing the cell cytoplasm seeping between the ones representing the confining cell membrane. This type of modelling may motivate future work on simulating simultaneous operations and interactions of multiple cellular agents in an attempt to re-create and predict the appearance of complex phenomena such as protoplasmic seepage that is caused by the force actuations of neighboring cells. Seepage occurs when a cytoplasm agent passes between three membrane particles connected in a triangular network. Based on the force–deformation response of spheres having variable size and stiffness, semi-analytic expressions are developed for the force required to cause seepage and solved numerically to find the maximum resistance offered by the membrane against cytoplasm seepage. The equations are based on force equilibrium and the constitutive relations for particle contact and membrane stiffness. In multi-particle representations of an individual cell undergoing deformation, different modes of cytoplasm seepage through confining cell membranes can occur. This can be avoided if simple criteria are satisfied. These findings can lead to certain fundamental laws for the improvement of novel cell-to-organ simulation techniques based on discrete element method.     

Endocytic and transcytotic processes in villous syncytiotrophoblast: role in nutrient transport to the human fetus

The supply of nutrients to the developing fetus is a major function of the human hemochorial placenta, a placenta type in which the fetal chorion is in direct contact with the maternal blood. At term, nutrients have to be transported across two cell layers in chorionic villi, the syncytiotrophoblast (STB) and fetal endothelial cells. The STB is a continuous syncytium covering the entire surface of chorionic villi. This polarized epithelium is specialized in exchange processes and membrane trafficking between the apical membrane facing the maternal blood and the basal membrane facing the fetal endothelium. To meet placental and fetal requirements, the STB selectively takes up and transports a variety of nutrients, hormones, growth factors and cytokines and also transfers passive immunity to the fetus by receptor-mediated transcytosis. In this review in vivo and in vitro systems currently used to study STB functions are discussed and the potential mechanisms of transplacental IgG, iron, lipoprotein and glucose transport are presented. As revealed in this article, the placenta is a tissue where intensive cell biological research is required to unravel endocytic trafficking pathways in a highly specialized cell such as the STB.     

Simultaneous imaging of the surface and the submembraneous cytoskeleton in living cells by tapping mode atomic force microscopy

Contact and tapping mode atomic force microscopy have been used to visualize the surface of cultured CV-1 kidney cells in aqueous medium. The height images obtained from living cells were comparable when using contact and tapping modes. In contrast, the corresponding, and simultaneously acquired, deflection images differed markedly. Whereas, as expected, deflection images enhanced the surface features in the contact mode, they revealed the presence of a filamentous network when using the tapping mode. This network became disorganized upon addition of cytochalasin, which strongly suggests that it corresponded to the submembraneous cytoskeleton. Examination of fixed cells further supported this assumption. These data show that, in addition to the structural information on the cell surface, the use of the tapping mode in liquid can also provide a good visualization of the membrane cytoskeleton. Tapping mode atomic force microscopy appears to he a promising technique for studying interactions between cell surface and subsurface structures, a critical step in many biological processes.     

Live Cell Linear Dichroism Imaging Reveals Extensive Membrane Ruffling within the Docking Structure of Natural Killer Cell Immune Synapses

We have applied fluorescence imaging of two-photon linear dichroism to measure the subresolution organization of the cell membrane during formation of the activating (cytolytic) natural killer (NK) cell immune synapse (IS). This approach revealed that the NK cell plasma membrane is convoluted into ruffles at the periphery, but not in the center of a mature cytolytic NK cell IS. Time-lapse imaging showed that the membrane ruffles formed at the initial point of contact between NK cells and target cells and then spread radialy across the intercellular contact as the size of the IS increased, becoming absent from the center of the mature synapse. Understanding the role of such extensive membrane ruffling in the assembly of cytolytic synapses is an intriguing new goal.