Synthesis and characterisation of [Pt2(μ-S)(μ-I)(PPh3)4] - A cationic iodo analogue of the metalloligand [Pt2(μ-S)2(PPh3)4]

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a number of transition metal-iodo complexes leads to the formation of the cationic iodo analogue [Pt₂(μ-S)(μ-I)(PPh₃)₄]⁺, identified using electrospray ionisation mass spectrometry (ESI MS). Synthetic routes to this complex were developed, using the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with either [PtI₂(PPh₃)₂] or elemental iodine. The complex was characterised by NMR spectroscopy, ESI MS and an X-ray structure determination, which reveals the presence of a planar, disordered {Pt₂SI}⁺ core. Monitoring the iodine reaction by ESI MS allows the identification of various iodine species, including the short-lived intermediate [Pt₂(μ-S)₂(PPh₃)₄I]⁺, which allows a mechanism for the reaction to be proposed.     

Hyponitrite complexes: Crystal and molecular structure of [Ru2(CO)4(μ-PBu2)(μ-Ph2PCH2PPh2)(μ-η-ONNOMe)]

The new trans-hyponitrite derivative complex [Ru₂(CO)₄(μ-P^tBu₂)(μ-dppm)(μ-η²-ONNOMe)] (2, dppm = Ph₂PCH₂PPh₂) was prepared by deprotonation of [Ru₂(CO)₄(μ-H)(μ-P^tBu₂)(μ-dppm)(μ-η²-ONNOMe)][BF₄] (1) with the base DBU (1.8-diazabicyclo[5.4.0]undec-7-ene). The latter complex salt has been obtained in an improved synthesis starting from the trans-hyponitrite complex [Ru₂(CO)₄(μ-H)(μ-P^tBu₂)(μ-dppm)(μ-η²-ONNO)]. Compound 2 has been characterized by spectroscopic methods as well as by X-ray diffraction and represents the first neutral complex bearing a deprotonated monoester of the hyponitrous acid as the bridging ligand.     

Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

The arylation of [Pt2(μ-S)2(PPh3)4]

Routes to the synthesis of the mixed sulfide-phenylthiolate complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ have been explored; reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess Ph₂IBr proceeds readily to selectively produce this complex, which was structurally characterised as its PF₆⁻ salt. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with other potent arylating reagents (1-chloro-2,4-dinitrobenzene and 1,5-difluoro-2,4-dinitrobenzene) also produce the corresponding nitroaryl-thiolate complexes [Pt₂(μ-S){μ-SC₆H₂(NO₂)₂X}(PPh₃)₄]⁺ (X = H, F). The complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ reacts with Me₂SO₄ to produce the mixed alkyl/aryl bis-thiolate complex [Pt₂(μ-SMe)(μ-SPh)(PPh₃)₄]²⁺, but corresponding reactions with the nitroaryl-thiolate complexes are plagued by elimination of the nitroaryl group and formation of [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ also reacts with Ph₃PAuCl to give [Pt₂(μ-SAuPPh₃)(μ-SPh)(PPh₃)₄]²⁺.     

Chalcogenide-capped triruthenium clusters: X-ray structures of [Ru3(CO)6(μ3-CO){P(C4H3S)3}(μ-dppm)(μ3-O)] and [(μ-H)2Ru3(CO)6{P(C4H3S)3}(μ-dppm)(μ3-S)]

Treatment of [Ru₃(CO)₉{P(C₄H₃S)₃}(μ-dppm)] (1) [dppm = bis(diphenylphosphino)methane] with molecular oxygen in benzene at 60 °C affords oxo-capped [Ru₃(CO)₆(μ₃-CO){P(C₄H₃S)₃}(μ-dppm)(μ₃-O)] (2), while with elemental sulfur and selenium related chalcogenide-capped clusters [Ru₃(CO)₆(μ₃-CO){P(C₄H₃S)₃}(μ-dppm)(μ₃-E)] (3, E = S; 5, E = Se) and bis(chalcogenide) clusters [Ru₃(CO)₆{P(C₄H₃S)₃}(μ-dppm)(μ₃-E)₂] (4, E = S; 6, E = Se) result. Reaction of 1 with H₂S in refluxing THF affords the previously reported [(μ-H)₂Ru₃(CO)₇(μ-dppm)(μ₃-S)] (7) together with the new sulfido-capped dihydride [(μ-H)₂Ru₃(CO)₆{P(C₄H₃S)₃}(μ-dppm)(μ₃-S)] (8). All new compounds have been characterized by spectroscopic data, and 2 and 8 by single-crystal X-ray diffraction analyses. Oxo-capped 2 consists of a triangular ruthenium framework capped on opposite sides by oxo and carbonyl groups, while 8 consists of a ruthenium triangle by a capping sulfido ligand and two inequivalent bridging hydride ligands.     

Molecular structure of tetranuclear [{Mo2O(S2CNEt2)(η-O2CCF3)(μ-N-o-tol)2}2(μ-O)(μ-O2CCF3)2] formed upon addition of trifluoroacetic acid to syn-[MoO(μ-N-o-tol)(S2CNEt2)]2

Addition of trifluoroacetic acid to syn-[MoO(μ-N-o-tol)(S₂CNEt₂)]₂ in chloroform affords tetranuclear [{Mo₂O(S₂CNEt₂)(η¹-O₂CCF₃)(μ-N-o-tol)₂}₂(μ-O)(μ-O₂CCF₃)₂] which has been crystallographically characterised. It consists of four molybdenum(V) centres linked via bridging imido, trifluoroacetate and oxo ligands and results from replacement of a dithiocarbamate by two trifluoroacetate ligands.     

Reactivity of [PdCl(μ-med)]2 with monodentate or bidentate ligands. Structure of the dinuclear complexes [Pd(μ-med)(PPh3)]2(BF4)2 and [Pd(μ-med)(bpy)]2(BF4)2. [Hmed=N-(2-mercaptoethyl)-3,5-dimethylpyrazole]

Treatment of the ligand N-(2-mercaptoethyl)-3,5-dimethylpyrazole with [Pd(CH₃COO)₂]₃ and reaction of [PdCl(μ-med)]₂ with pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ produced the following complexes: [Pd(CH₃COO)(μ-med)]₂, [Pd(μ-med)(py)]₂(BF₄)₂ and [Pd(μ-med)(PPh₃)]₂(BF₄)₂. Similar reactions carried out with 2,2^′-bipyridine (bpy) or 1,3-bis(diphenylphosphino)propane (dppp) produced [Pd(μ-med)(bpy)]_x(BF₄)_x (x=1 or 2) and [Pd(μ-med)(dppp)]_x(BF₄)_x (x=1 or 2). Treatment of [Pd(μ-med)(bpy)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced [Pd₃Cl₂(μ-med)₂(bpy)₂](BF₄)₂. Treatment of [Pd(μ-med)(dppp)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced a mixture of [Pd(μ-Cl)(dppp)]₂(BF₄)₂ and [Pd(μ-med)₂(dppp)]²⁺. X-ray crystal structures of [Pd(μ-med)(PPh₃)]₂(BF₄)₂ · 2CH₃CN and [Pd(μ-med)(bpy)]₂(BF₄)₂ · 0.5CH₃OH are presented.     

Heterobimetallic platinum-bismuth aggregates derived from [Pt2(μ-S)2(PPh3)4]

The metalloligand [Pt₂(μ-S)₂(PPh₃)₄] reacts with Bi(S₂CNEt₂)₃ or Bi(S₂COEt)₃ in methanol to produce the orange cationic adducts [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]⁺ and [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂COEt)₂]⁺, respectively, isolated as their hexafluorophosphate salts. An X-ray structure determination on [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]PF₆ reveals the presence of a six-coordinated bismuth centre with an approximately nido-pentagonal bipyramidal coordination geometry. Fragmentation pathways for both complexes have been probed using electrospray ionisation mass spectrometry; ions [Pt₂(μ-S)₂(PPh₃)₂Bi(S₂CXEt_n)₂]⁺ (X = O, n = 1, X = N, n = 2) are formed by selective loss of two PPh₃ ligands, and at higher cone voltages the species [(Ph₃P)PtS₂Bi]⁺ is observed. Ions formed by loss of CS₂ are also observed for the xanthate but not the dithiocarbamate ions.     

A versatile entry into aqueous niobium chemistry: isolation and structure of the intermediate Nb4(μ2-O)2(μ2-OC2H5)4Cl4(OC2H5)4(HOC2H5)4

The reduction of ethanolic solutions of niobium pentachloride with zinc, followed by treatment with aqueous acids serves as a versatile entry into the aqueous solution chemistry of niobium. From the zinc-reduced solution, the major intermediate, Nb₄(μ₂-O)₂(μ₂-OC₂H₅)₄Cl₄(OC₂H₅)₄(HOC₂H₅)₄, was isolated and the crystal structure determined by X-ray crystallography. The complex crystallizes in the orthorhombic space group Pccn, with Z=4, a=21.0105(9), b=11.0387(5), c=19.1389(8), V=4438.9(3) ų, M_r=1090.19,R₁=0.0327 and wR₂=0.0876. The structure revealed a centrosymmetric tetrameric Nb(IV) complex, consisting of a pair of edge-sharing bi-octahedral Nb₂(μ₂-OC₂H₅)₄Cl₂(OC₂H₅)₂(HOC₂H₅)₂ units that are joined by two axial oxo ligands. The Nb-Nb distance of 2.7458(3) Å is consistent with a single metal-metal bond.     

Hydrido-derivatives of [Ir4(CO)10(diphosphine)]: X-ray analyses of [Ir4H(CO)9(μ-Ph2PH(CH3)PPh2)] and [Ir4 H(CO)9(μ-Ph2P(CH2)nPPh2)] (n = 2, 3)

Some novel hydrido-anions of general formula [Ir₄H(CO)₉(μ-L-L)]⁻ (L-L = Ph₂PCH(CH₃)PPh₂, Ph₂P(CH₂)₂PPh₂, Ph₂P(CH₂)₃PPh₂ and Ph₂AsCH₂AsPh₂) have been obtained by the reaction of [Ir₄(CO)₁₀(μ-L-L)] with the base 1,8-diazabicyclo[5.4.0]undec-7-ene in wet dichloromethane. According to IR and ¹H, ³¹P and ¹³C NMR data at low temperature, these anionic derivatives display a single conformation in solution: three edge-bridging COs around the triangular basal face and both the hydride and the bidentate ligands located in axial positions relative to this face. The structures of four compounds were established by X-ray diffraction studies, which confirmed the configuration proposed on the basis of spectroscopic data.     

A one-dimensional copper (II) coordination polymer [Cu3(ampym)2(μ1,1-N3)4(μ1,3-N3)2(dmf)2]n (ampym = 2-aminopyrimidine) containing both end-on and end-to-end azido bridges

A new polynuclear copper (II) complex, derived from the azido-bridging ligand and 2-aminopyrimidine, has been synthesized and its 3-D structure has been determined by X-ray diffraction methods at two different temperatures. The compound crystallizes in the triclinic system space group, with the central copper atom lying on an inversion centre. The crystal structure is built up by trinuclear units (each of them contains two double end-on azido bridges) linked through two azide ions in an end-to-end (EE) fashion, to yield the polymer chain [Cu₃(ampym)₂(μ_1,1-N₃)₄(μ_1,3-N₃)₂(dmf)₂]_n. Magnetic susceptibility measurement shows a ferromagnetic interaction above 30 K, whereas a weak anti-ferromagnetic interaction prevails in the range of 30-2 K.     

Fe-Rh and Fe-Ir clusters substituted by diphenylacetylene: Synthesis, solid state structure and electrochemical behaviour of [Fe2Ir2(CO)10(μ4:η-PhCCPh)], [FeIr2(CO)9(μ3:η-PhCCPh)], and [Fe2Rh(CO)8(μ3:η-PhCCPh)]

The reaction between [Fe₂Ir₂(CO)₁₂]²⁻ and diphenylacetylene in refluxing CH₃CN yields the substituted cluster [Fe₂Ir₂(CO)₁₀(PhC₂Ph)]²⁻ (1). In the crystals, the four metal atoms define a butterfly arrangement whose Ir-Ir hinge is parallel to the acetylenic C₂ unit. The neutral triangular cluster [FeIr₂(CO)₉(PhC₂Ph)] (2) is obtained by the treatment of 1 with acids at room temperature; in this 48 valence electrons species, the C-C and the Ir-Ir bonds are also parallel, in the coordination mode.The cluster [Fe₂Rh(CO)₁₀]⁻ reacts with diphenylacetylene in refluxing THF yielding [Fe₂Rh(CO)₈(PhC₂Ph)]⁻ (3). In this 46 C.V.E.’s cluster, the C₂ unit is perpendicular to the Fe-Fe edge, exemplifying the bonding mode. According to ¹³C NMR spectra, the structure of the three clusters is maintained in solution. Electrochemical investigations show that the one-electron oxidation of [Fe₂Ir₂(CO)₁₀(L)]²⁻ (L = 2CO, PhC₂Ph) as well as the one-electron reduction of [Fe₂Rh(CO)₈(PhC₂Ph)]⁻ only generates the respective short lived products.     

Novel Rh-Mn mixed-metal carbonyl cluster containing μ3 and μ-bridging carbyne ligands, [(μ3-CC6H5)(μ-CC6H5)Rh2Mn2Cp2(μ-CO)3(CO)3]: structure, electrochemistry and catalytic properties

The cationic carbyne complex [Cp(CO)₂MnCC₆H₅]BBr₄ (1) reacts with PPN[Rh(CO)₄] (2) to give the title cluster [(μ₃-CC₆H₅)(μ-CC₆H₅) Rh₂Mn₂Cp₂(μ-CO)₃(CO)₃] (3) whose structure has been determined by X-ray diffraction. The electrochemical properties of 3 have been investigated using cyclic voltammetric method. At 60 °C and 2.0 MPa of initial total CO/H₂ (1:1) pressure, the catalytic activity of 3 towards hydroformylation of styrene has also been checked.     

N-Heterocyclic carbene gold(I) and silver(I) adducts of [Pt2(μ-S)2(PPh3)4]

Reaction of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with the N-heterocyclic carbene (NHC) complexes IPrAuCl, IMesAuCl and IMesAgCl in methanol gave the first examples of metal adducts of [Pt₂(μ-S)₂(PPh₃)₄] that contain NHC ligands, namely [Pt₂(μ-S)₂(PPh₃)₄AuL]⁺ (L = IPr, IMes) and [Pt₂(μ-S)₂(PPh₃)₄AgIMes]⁺. The complexes were isolated as hexafluorophosphate salts. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess IPrAuCl in refluxing methanol yielded only the mono-adduct, in contrast to the behaviour with the gold(I) phosphine complex Ph₃PAuCl, which undergoes double addition giving [Pt₂(μ-SAuPPh₃)₂(PPh₃)₄]²⁺. The X-ray structure of [Pt₂(μ-S)₂(PPh₃)₄AuIPr]PF₆ was determined and reveals that the ‘free’ sulfide is substantially sterically protected by the IPr ligand, accounting for the low reactivity towards addition of a second AgIPr⁺ moiety.     

Synthesis of some pentanuclear platinum clusters [Pt5(CO)6(L)4]. The X-ray structure of [Pt5(μ-CO)5(CO)(PCy3)4]

[Pt₅(μ-CO)₅(CO)L₄] (L = PPh₃1, PPh₂Bz 2, AsPh₃3, PEt₃4, PCy₃5) have been synthesized by reacting [Pt₃(μ-CO)₃(PR₃)₃] with H₂O₂ (1 and 2), by reduction of cis-[PtCl₂(CO)(PEt₃)] with Zn dust (4), and by the Zn reduction of [Pt₃(μ-CO)₃(PCy₃)₃] in the presence of [PtCl₂(CH₃CN)₂] (5). Complex 5 has not been observed previously and has been characterized by X-ray crystallography. Oxidation of the phosphine ligands with H₂O₂ is a new way to synthesize 1 and 2. The first complete NMR characterization of these complexes has also been achieved, and showed that these pentanuclear cluster complexes exhibit similar stereochemistries in solution and in the solid state. The observed ¹J_Pt-Pt values do not have any correlation with the corresponding bond lengths, again pointing out the irregular behaviour of such parameter in Pt complexes.     

Potassium(I)thallium(I) heterometallic 3D polymeric mixed-anions compound, succinate-nitrate [K2Tl(μ-C4H4O4)(μ-NO3)]n

A three-dimensional polymeric K^ITl^I heterometallic compound [K₂Tl(μ-C₄H₄O₄)(μ-NO₃)]_n, with mixes succinate and nitrate ligands, has been synthesized and characterized. Its single-crystal X-ray structure shows two types of K⁺-ions with coordination numbers of seven and eight and one Tl⁺-ion with a coordination number of five. However, the arrangement of O-atoms for Tl^I suggests a gap or hole in the coordination geometry around this atom. This ‘hole’ is possibly occupied by a stereochemically ‘active’ electron lone pair of thallium atoms. Two hydrogen atoms of succinate situated 3.26 Å above the proposed site on the lone pair of Tl^I is oriented in such a way that it might be thought to be forming weak Tl-Lp?H-C hydrogen bond or agostic interactions, thus attaining of environment TlO₅H₂.     

Octahedral (cyclopentadienyl)rhodium clusters [Rh6Cp6(μ6-C)] and [Rh6Cp6(μ3-CO)2]: Synthesis, structures and electrochemistry

The 86-electron dicationic octahedral rhodium clusters containing Cp (Cp = C₅H₅) ligands and either an interstitial carbon atom, [Rh₆Cp₆(μ₆-C)]²⁺ ([1]²⁺), or two carbonyl groups, [Rh₆Cp₆(μ₃-CO)₂]²⁺ ([2]²⁺), were synthesized in low yields by reactions of Rh₃Cp₃(μ-CO)₃ with RhCp(C₂H₄)₂ or [RuCp^∗(MeCN)₃]⁺ (Cp^∗ = C₅Me₅), respectively. The structures of [1]²⁺ and [2]²⁺ were determined by X-ray diffraction. Their electrochemical behavior proved that they possess a rather extended electron transfer activity. In accordance with DFT calculations, the nearly octahedral structure of [1]²⁺ and [2]²⁺ is retained both upon oxidation (2+/3+) and the first reduction (2+/+); however, the second reduction (+/0) results in the breaking of one (for [1]⁰) or two (for [2]⁰) Rh-Rh bonds. In the case of the related Dahl’s nickel cluster Ni₆Cp₆ the nearly octahedral structure is retained upon all redox steps (3+/2+/+/0/−/2−).     

Thiotungstates containing the syn-[W2(O/S)2(μ-S)2] (E = O, S) and cuboidal [W2Cu2(μ3-S)4] cores

Reaction of [W^VIS₄]²⁻ with ethane-1,2-dithiol edtH₂ in the presence of the sulfide scavenger Cd²⁺ yielded the dinuclear tungstate syn-[{(edt)W^V(O/S)}₂(μ-S)₂]²⁻ (1), with the terminal S/O disordered over the two tungsten sites in the ratio 0.8:02. In the presence of thiocyanate, phosphine and CuI, the anionic cuboidal clusters of composition [{(SCN)₃W^V}₂{Cu^I(PPh₃)}₂(μ₃-S)₄]²⁻ (2) and (3, diphos = 1,2-bis(o-diphenylphosphinophenyl)ethane), and possibly via an intermediate [{(SCN)₃W^VS}₂(μ-S)₂]⁴⁻. The crystal and molecular structures of [Et₄N]₂1, [Et₄N]₂2 · H₂O and [Et₄N]₂3 · H₂O have been determined.