Nanostructured lipid carriers improve skin permeation and chemical stability of idebenone

Idebenone (IDB) is a synthetic antioxidant and analog of coenzyme Q10. The percutaneous permeation of IDB was investigated in guinea pig skin after application of different formulations. The enhancing effects of various formulations [nanostructured lipid carriers (NLCs), nanoemulsion (NE), or oil solution] on the permeation of IDB were evaluated using ex vivo guinea pig skins. Furthermore, stability of different formulations and in which chemical stability of IDB was determined during storage. Permeation experiments revealed that formulations varied in their ability to enhance the skin permeation of IDB. For NLC formulation, the cumulative amount of IDB in the epidermis, dermis, and acceptor medium of diffusion cells was approximately threefold more than NE or oil solution at the end of 24-h experiment. No significant difference between NE and oil solution was observed in the enhancement of penetration efficacy of IDB. Different formulations resulted in stability with different properties. NLC formulation revealed preferentially more stable than NE. The residual percentage of IDB loaded in NLCs, NE, and oil solution was 90.1%, 65.4%, and 51.3%, respectively, when stored at 40°C under 75% RH and 3,000 lx light conditions for 180 days. The results obtained here demonstrated that the abilities of NLCs to improve the chemical stability of IDB and enhance the skin permeation are much better than NE and oil solution. These suggest that NLCs containing IDB have significant potential use for skin care as an alternative topical formulation.     

Formulation and Evaluation of Lidocaine Lipid Nanosystems for Dermal Delivery

The objective of the present investigation was to formulate solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) for improving the dermal delivery of a local anesthetic agent lidocaine (LID). SLN and NLC were characterized for particle size distribution, polydispersity index, entrapment efficiency, X-ray powder diffraction pattern (XRD), thermal behavior by differential scanning colorimeter (DSC) and surface morphology by transmission electron microscopy (TEM). LID-loaded SLN and NLC were formulated into hydrogels for topical application. The in vitro permeation profiles of LID SLN gel, LID NLC gel, and a marketed LID formulation (Xylocaine® gel) were evaluated by using guinea pig skin. The in vivo efficacy of LID SLN gel, LID NLC gel, and a marketed LID formulation (Xylocaine® gel) gel was evaluated on guinea pig using pinprick test. LID SLN showed a particle size of 78.1 nm with a polydispersity index of 0.556, whereas LID NLC showed a particle size of 72.8 nm with a polydispersity index of 0.463. The entrapment efficiency of LID in both SLN and NLC was 97% and 95.9%, respectively. The TEM studies revealed the almost spherical nature of LID SLN and NLC formulations. The XRD and DSC studies of LID SLN suggested amorphization of drug in the carrier system. The SLN formulation was stable with respect to particle size, polydispersity, and entrapment efficiency for 6 months at 40°C/75% relative humidity (RH). Negligible leakage was observed for the NLC formulation when stored for 1 month at 40°C/75% RH. In vitro permeation studies indicated that LID SLN gel and LID NLC gel significantly sustained the LID release compared to that of Xylocaine® gel. The in vivo efficacy results supported the results of the in vitro permeation studies wherein the LID SLN gel and LID NLC gel resulted in fivefold and sixfold increase in duration of anesthesia, respectively, compared to that of Xylocaine® gel.     

Recent Advances in Lipid Nanoparticle Formulations with Solid Matrix for Oral Drug Delivery

Lipid nanoparticles based on solid matrix have emerged as potential drug carriers to improve gastrointestinal (GI) absorption and oral bioavailability of several drugs, especially lipophilic compounds. These formulations may also be used for sustained drug release. Solid lipid nanoparticle (SLN) and the newer generation lipid nanoparticle, nanostructured lipid carrier (NLC), have been studied for their capability as oral drug carriers. Biodegradable, biocompatible, and physiological lipids are generally used to prepare these nanoparticles. Hence, toxicity problems related with the polymeric nanoparticles can be minimized. Furthermore, stability of the formulations might increase than other liquid nano-carriers due to the solid matrix of these lipid nanoparticles. These nanoparticles can be produced by different formulation techniques. Scaling up of the production process from lab scale to industrial scale can be easily achieved. Reasonably high drug encapsulation efficiency of the nanoparticles was documented. Oral absorption and bioavailability of several drugs were improved after oral administration of the drug-loaded SLNs or NLCs. In this review, pros and cons, different formulation and characterization techniques, drug incorporation models, GI absorption and oral bioavailability enhancement mechanisms, stability and storage condition of the formulations, and recent advances in oral delivery of the lipid nanoparticles based on solid matrix will be discussed.     

Development and Optimisation of Spironolactone Nanoparticles for Enhanced Dissolution Rates and Stability

Stable solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) formulations to enhance the dissolution rates of poorly soluble drug spironolactone (SP) were being developed. Probe ultra-sonication method was used to prepare SLNs and NLCs. All NLCs contained stearic acid (solid lipid carrier) and oleic acid (liquid lipid content), whereas, SLNs were prepared and optimised by using the solid lipid only. The particles were characterised in terms of particle size analysis, thermal behaviour, morphology, stability and in vitro release. The zeta sizer data revealed that the increase in the concentration of oleic acid in the formulations reduced the mean particle size and the zeta potential. The increase in concentration of oleic acid from 0 to 30% (w/w) resulted in a higher entrapment efficiency. All nanoparticles were almost spherically shaped with an average particle size of about ～170 nm. The DSC traces revealed that the presence of oleic acid in the NLC formulations resulted in a shift in the melting endotherms to a higher temperature. This could be attributed to a good long-term stability of the nanoparticles. The stability results showed that the particle size remained smaller in NLC compared to that of SLN formulations after 6 months at various temperatures. The dissolution study showed about a 5.1- to 7.2-fold increase in the release of the drug in 2 h compared to the raw drug. Comparing all nanoparticle formulations indicated that the NLC composition with a ratio of 70:30 (solid:liquid lipid) is the most suitable formulation with desired drug dissolution rates, entrapment efficiency and physical stability.     

Preparation, characterization, and in vitro and in vivo evaluation of lovastatin solid lipid nanoparticles

The purpose of this research was to study whether the bioavailability of lovastatin could be improved by administering lovastatin solid lipid nanoparticles (SLN) duodenally to rats. Lovastatin SLN were developed using triglycerides by hot homogenization followed by ultrasonication. Particle size and zeta potential were measured by photon correlation spectroscopy. The solid state of the drug in the SLN and lipid modification were characterized. Bioavailability studies were conducted in male Wistar rats after intraduodenal administration of lovastatin suspension and SLN. Stable lovastatin SLN having a mean size range of 60 to 119 nm and a zeta potential range of −16 to −21 mV were developed. More than 99% of the lovastatin was entrapped in the SLN. Lovastatin was dispersed in an amorphous state, and triglycerides were in {ieE162-1} form in the SLN. In vitro stability studies showed the slow release and stability of lovastatin SLN. The relative bioavailabilities of lovastatin and lovastatin hydroxy acid of SLN were increased by ∼173% and 324%, respectively, compared with the reference lovastatin suspension. Published: March 23, 2007     

Preparation and Evaluation of Miconazole Nitrate-Loaded Solid Lipid Nanoparticles for Topical Delivery

The purpose of this study was to prepare miconazole nitrate (MN) loaded solid lipid nanoparticles (MN-SLN) effective for topical delivery of miconazole nitrate. Compritol 888 ATO as lipid, propylene glycol (PG) to increase drug solubility in lipid, tween 80, and glyceryl monostearate were used as the surfactants to stabilize SLN dispersion in the SLN preparation using hot homogenization method. SLN dispersions exhibited average size between 244 and 766 nm. All the dispersions had high entrapment efficiency ranging from 80% to 100%. The MN-SLN dispersion which showed good stability for a period of 1 month was selected. This MN-SLN was characterized for particle size, entrapment efficiency, and X-ray diffraction. The penetration of miconazole nitrate from the gel formulated using selected MN-SLN dispersion as into cadaver skins was evaluated ex-vivo using franz diffusion cell. The results of differential scanning calorimetry (DSC) showed that MN was dispersed in SLN in an amorphous state. The MN-SLN formulations could significantly increase the accumulative uptake of MN in skin over the marketed gel and showed a significantly enhanced skin targeting effect. These results indicate that the studied MN-SLN formulation with skin targeting may be a promising carrier for topical delivery of miconazole nitrate.     

Artemisia arborescens L essential oil-loaded solid lipid nanoparticles for potential agricultural application: Preparation and characterization

The aim of this study was to formulate a new delivery system for ecological pesticides by the incorporation of Artemisia arborescens L essential oil into solid lipid nanoparticles (SLN). Two different SLN formulations were prepared following the high-pressure homogenization technique using Compritol 888 ATO as lipid and Poloxamer 188 or Miranol Ultra C32 as surfactants. The SLN formulation particle size was determined using Photon correlation spectroscopy (PCS) and laser diffraction analysis (LD). The change of particle charge was studied by zeta potential (ZP) measurements, while the melting and recrystallization behavior was studied using differential scanning calorimetry (DSC). In vitro release studies of the essential oil were performed at 35°C. Data showed a high physical stability for both formulations at various storage temperatures during 2 months of investigation. In particular, average diameter of Artemisia arborescens L essential oil-loaded SLN did not vary during storage and increased slightly after spraying the SLN dispersions. In vitro release experiments showed that SLN were able to reduce the rapid evaporation of essential oil if compared with the reference emulsions. Therefore, obtained results showed that the studied SLN formulations are suitable carriers in agriculture. Published: January 3, 2006     

Etoposide-loaded nanoparticles made from glyceride lipids: Formulation,characterization, in vitro drug release,and stability evaluation

The aim of the study was to prepare etoposide-loaded nanoparticles with glyceride lipids and then characterize and evaluate the in vitro steric stability and drug release characteristics and stability. The nanoparticles were prepared by melt emulsification and homogenization followed by spray drying of nanodispersion. Spray drying created powder nanoparticles with excellent redispersibility and a minimal increase in particle size (20–40 nm). Experimental variables, such as homogenization pressure, number of homogenization cycles, and surfactant concentration, showed a profound influence on the particle size and distribution. Spray drying of Poloxamer 407-stabilized nanodispersion lead to the formation of matrix-like structures surrounding the nanoparticles, resulting in particle growth. The in vitro steric stability test revealed that the lipid nanoparticles stabilized by sodium tauroglycocholate exhibit excellent steric stability compared with Poloxamer 407. All 3 glyceride nanoparticle formulations exhibited sustained release characteristics, and the release pattern followed the Higuchi equation. The spray-dried lipid nanoparticles stored in black polypropylene containers exhibited excellent long-term stability at 25°C and room light conditions. Such stable lipid nanoparticles with in vitro steric stability can be a beneficial delivery system for intravenous administration as long circulating carriers for controlled and targeted drug delivery. Published: September 30, 2005     

Beyond liposomes: Recent advances on lipid based nanostructures for poorly soluble/poorly permeable drug delivery

Solid lipid nanoparticle (SLN), nanostructured lipid carriers (NLC) and hybrid nanoparticles, have gained increasing interest as drug delivery systems because of their potential to load and release drugs from the Biopharmaceutical classification system (BCS) of class II (low solubility and high permeability) and of class IV (low solubility and low permeability). Lipid properties (e.g. high solubilizing potential, biocompatibility, biotolerability, biodegradability and distinct route of absorption) contribute for the improvement of the bioavailability of these drugs for a set of administration routes. Their interest continues to grow, as translated by the number of patents being field worldwide. This paper discusses the recent advances on the use of SLN, NLC and lipid-polymer hybrid nanoparticles for the loading of lipophilic, poorly water-soluble and poorly permeable drugs, being developed for oral, topical, parenteral and ocular administration, also discussing the industrial applications of these systems. A review of the patents filled between 2014 and 2017, concerning the original inventions of lipid nanocarriers, is also provided.     

Lipid-based colloidal carriers for peptide and protein delivery--liposomes versus lipid nanoparticles

This paper highlights the importance of lipid-based colloidal carriers and their pharmaceutical implications in the delivery of peptides and proteins for oral and parenteral administration. There are several examples of biomacromolecules used nowadays in the therapeutics, which are promising candidates to be delivered by means of liposomes and lipid nanoparticles, such as solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC). Several production procedures can be applied to achieve a high association efficiency between the bioactives and the carrier, depending on the physicochemical properties of both, as well as on the production procedure applied. Generally, this can lead to improved bioavailability, or in case of oral administration a more consistent temporal profile of absorption from the gastrointestinal tract. Advantages and drawbacks of such colloidal carriers are also pointed out. This article describes strategies used for formulation of peptides and proteins, methods used for assessment of association efficiency and practical considerations regarding the toxicological concerns.     

Effect of Formulation Components on the In Vitro Permeation of Microemulsion Drug Delivery System of Fluconazole

The purpose of this study was to evaluate the effect of formulation components on the in vitro skin permeation of microemulsion drug delivery system containing fluconazole (FLZ). Lauryl alcohol (LA) was screened as the oil phase of microemulsions. The pseudo-ternary phase diagrams for microemulsion regions were constructed using LA as the oil, Labrasol (Lab) as the surfactant and ethanol (EtOH) as the cosurfactant. The formulation which showed a highest permeation rate of 47.15 ± 1.12 μg cm⁻² h⁻¹ and appropriate physicochemical properties was optimized as containing 2% FLZ, 10% LA, 20% Lab/EtOH (1:1), and 68% double-distilled water (w/w). The efficiency of microemulsion formulation in the topical delivery of FLZ was dependent upon the contents of water and LA as well as Lab/EtOH mixing ratio. It was concluded that the percutaneous absorption of FLZ from microemulsions was enhanced with increasing the LA and water contents, and with decreasing the Lab/EtOH ratio in the formulation. Candida albicans was used as a model fungus to evaluate the antifungal activity of the best formula achieved, which showed the widest zone of inhibition as compared to FLZ reference. The studied microemulsion formulation showed a good stability for a period of 3 months. These results indicate that the studied microemulsion formulation might be a promising vehicle for topical delivery of FLZ.     

Nanostructured Lipid Carriers (NLC) for Parenteral Delivery of an Anticancer Drug

The purpose of this research was to formulate nanostructured lipid carriers (NLC) for the parenteral delivery of an anticancer drug, all-trans retinoic acid (ATRA). The ATRA was incorporated into NLC by the de novo emulsification method. The effect of the formulation factor, i.e., type and oil ratio, initial ATRA concentration on physicochemical properties was determined. The anticancer efficacy of ATRA-loaded NLC on HL-60 and HepG2 cells was also studied. NLC was formulated using a blend of solid lipids (cetyl palmitate) and liquid lipids (soybean oil (S), medium-chain triglyceride (M), S/oleic acid (O; 3:1) and M/O (3:1)) at a weight ratio of 1:1. ATRA-loaded NLC had an average size of less than 200 nm (141.80 to 172.95 nm) with a narrow PDI and negative zeta potential that was within an acceptable range for intravenous injection. The results indicated that oleic acid enhanced the ATRA-loading capacity of NLC. In vitro ATRA release was only approximately 4.06% to 4.34% for 48 h, and no significant difference in ATRA release rate from all NLC formulations in accordance with the composition of the oil phase. Moreover, no burst release of the drug was observed, indicating that NLC could prolong the release of ATRA. The initial drug concentration affected the photodegradation rate but did not affect the release rate. All ATRA-loaded NLC formulations exhibited the photoprotective property. The cytotoxicity results showed that all ATRA-loaded NLC had higher cytotoxicity than the free drug and HL-60 cells were more sensitive to ATRA than HepG2 cells.     

固体脂质纳米粒的制备及在治疗中的应用研究

固体脂质纳米粒(SLN)是20世纪90年代发展起来的一种性能优异的新型纳米粒给药剂型作为一种新型载体,可有效提高包封药物的稳定性、提高病变部位靶向性、低毒性与组织亲和性,为药物的体内递送提供了一种新的方法。本文主要针对固体脂质纳米粒的制备,发展现状,目前存在的问题及解决思路等作以介绍与总结。并在此基础上,介绍了新的脂质纳米粒,纳米脂质载体(nanostructured lipid carriers,NLC)和药脂结合物纳米粒(Lipid drug conjugate nanoparticles,LDC),以及未来固体脂质纳米粒的发展方向。     

Solid Lipid Nanoparticles as Effective Reservoir Systems for Long-Term Preservation of Multidose Formulations

Cosmetic multidose preparations, as well as pharmaceutical ones, are at risk of contamination by microorganisms, due to their high water content. Besides the risk of contamination during manufacturing, multidose cosmetic preparations may be contaminated by consumers during their use. In this paper, the results of the utilization of nanoparticles as reservoir systems of parabens, the most used class of preservatives, were reported. Two different systems, solid lipid nanoparticles (SLN) made of pure precirol and nanostructured lipid carriers (NLC) made of precirol and almond oil, containing three parabens as single molecules or as a mixture, were prepared and tested. All the systems were characterized for size, polydispersion index, zeta potential and encapsulation efficiency. Release experiments, carried out in steady state and sink conditions, allowed to evidence that both SLN and NLC were able to act as reservoir systems. The antimicrobial activity of the systems was tested against Candida albicans ATCC 10231 with repeat insult tests. The results of the release experiments and the antimicrobial tests showed very low water concentration of parabens still maintaining their antimicrobial activity.     

Challenges and solutions for the delivery of biotech drugs--a review of drug nanocrystal technology and lipid nanoparticles

Biotechnology allows tailor-made production of biopharmaceuticals and biotechnological drugs; however, many of them require special formulation technologies to overcome drug-associated problems. Such potential challenges to solve are: poor solubility, limited chemical stability in vitro and in vivo after administration (i.e. short half-life), poor bioavailability and potentially strong side effects requiring drug enrichment at the site of action (targeting). This review describes the use of nanoparticulate carriers, developed in our research group, as one solution to overcome such delivery problems, i.e. drug nanocrystals, solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC) and lipid-drug conjugate (LDC) nanoparticles, examples of drugs are given. As a recently developed targeting principle, the concept of differential protein adsorption is described (PathFinder Technology) using as example delivery to the brain.     

Nanostructured lipid carriers as semisolid topical delivery formulations for diflucortolone valerate

Context: Topical treatment of skin disease needs to be strategic to ensure high drug concentration in the skin with minimum systemic absorption.

Objective: The aim of this study was to produce semisolid nanostructured lipid carrier (NLC) formulations, for topical delivery of the corticosteroid drug, diflucortolone valerate (DFV), with minimum systemic absorption.

Method: NLC formulations were developed using a high shear homogenization combined with sonication, using Precirol® ATO5 or Tristearin® as the solid lipid, Capryol? or isopropyl myristate as the liquid lipid and Poloxamer® 407 as surfactant. The present study addresses the influence of different formulations composition as solid lipid, liquid lipid types and concentrations on the physicochemical properties and drug release profile from NLCs.

Results and discussion: DFV-loaded NLC formulations possessed average particle size ranging from 160.40?nm to 743.7?nm with narrow polydispersity index. The encapsulation efficiency was improved by adding the lipid-based surfactants (Labrasol® and Labrafil® M1944CS) to reach 68%. The drug release from the investigated NLC formulations showed a prolonged release up to 12?h. The dermatopharmacokinetic study revealed an improvement in drug deposition in the skin with the optimized DFV-loaded NLC formulation, in contrast to a commercial formulation.

Conclusion: NLC provides a promising nanocarrier system that work as reservoir for targeting topical delivery of DFV.     

Nanolipidgel for Enhanced Skin Deposition and Improved Antifungal Activity

The purpose of the research was to prepare and evaluate a topical nanolipidgel (NLH) of terbinafine hydrochloride (TRB), an antimycotic agent, for enhanced skin deposition and improved antifungal activity. Topical solid lipid nanoparticles (SLN) based nanolipidgel was formulated and evaluated. TRB-loaded SLNs were formulated by high-pressure homogenization technique. The stable TRB SLN dispersion was incorporated into a gel using 1% Carbopol 980 NF. Rheological evaluation and texture analysis of the TRB NLH was carried out. Skin permeation, skin deposition, antifungal activity, and occlusivity studies of the nanolipidgel formulation were carried out. The safety of the TRB NLH gel was evaluated using acute skin irritation test on New Zealand White rabbits. The SLN dispersion containing 10% of glyceryl monostearate, 3% of Tween 80, and 1% Plurol Oleique was the most stable. The optimized TRB SLN had a particle size and zeta potential value of 148.6 ± 0.305 nm and −20.4 ± 1.2 mV, respectively. TRB NLH had excellent rheological and texture properties to facilitate its topical application. TRB NLH showed increased skin deposition of the drug over plain (3-fold) and marketed TRB formulation (2-fold). TRB NLH had significantly enhanced antifungal activity against Candida albicans. TRB NLH showed efficient occlusivity and was non-irritant to the rabbit skin with no signs of erythema or edema. Solid lipid nanoparticles-based topical nanolipidgel of terbinafine can be an efficient, industrially scalable, and cost-effective alternative to the existing conventional formulations.KEY WORDS: in vitro antifungal activity, rheological analysis of gel, solid lipid nanoparticles, terbinafine, texture analysis of gel     

Rice germ oil as multifunctional excipient in preparation of self-microemulsifying drug delivery system (SMEDDS) of tacrolimus

Surmounting the constraints of limited solubilization efficiency and prime requisite of antioxidant for conventional lipid formulations, the research work explores an edge over formulation utilizing potential applicability of rice germ oil (RGO) as a multifunctional excipient. Self-microemulsifying drug delivery system (SMEDDS) of tacrolimus (TAC) was formulated with RGO, an indigenous source of gamma-oryzanol. Being the same biological source, RGO and rice bran oil (RBO) were compared and it was found that RGO have more solubilization potential for TAC (2.2-fold) as well as higher antioxidant activity (8.06-fold) than the RBO. TAC-SMEDDS was prepared using RGO/Capmul PG8 (2:3) as an oil phase, Cremophore EL as a surfactant, and Transcutol P as a cosurfactant. The approximate particle size of TAC-SMEDDS was found to be 38 nm by dynamic light scattering and 12 nm by small angle neutron scattering. The in vitro dissolution studies showed complete and rapid drug release in 30 min compared to a plain drug (<5%) and marketed capsule (<50%). AUC and C _max were found to be 45.05 ± 15.64 ng h/ml and 3.91 ± 1.2 ng/ml for TAC-SMEDDS, 12.59 ± 5.54 ng h/ml and 0.48 ± 0.12 ng/ml for plain TAC, and 30.23 ± 10.34 ng h/ml and 2.31 ± 0.68 ng/ml for marketed formulation, respectively. The improved pharmacokinetic profile of TAC-SMEDDS is correlating to the dissolution results. Thus, gamma-oryzanol-enriched RGO acts as a potential multifunctional excipient for lipid formulations.     

Duloxetine HCl Lipid Nanoparticles: Preparation,Characterization, and Dosage Form Design

Solid lipid nanoparticles (SLNs) of duloxetine hydrochloride (DLX) were prepared to circumvent the problems of DLX, which include acid labile nature, high first-pass metabolism, and high-dosing frequency. The DLX-SLNs were prepared by using two different techniques, viz. solvent diffusion method and ultrasound dispersion method, and evaluated for particle size, zeta potential, entrapment efficiency, physical characteristics, and chemical stability. Best results were obtained when SLNs were prepared by ultrasound dispersion method using glyceryl mono stearate as solid lipid and DLX in ratio of 1:20 and mixture of polysorbate 80 and poloxamer 188 as surfactant in concentration of 3%. The mean particle size of formulation and entrapment efficiency was 91.7 nm and 87%, respectively, and had excellent stability in acidic medium. Differential scanning calorimetry and X-ray diffraction data showed complete amorphization of DLX in lipid. In vitro drug release from SLNs was observed for 48 h and was in accordance with Higuchi kinetics. In vivo antidepressant activity was evaluated in mice by forced swim test. DLX-SLNs showed significant enhancement in antidepressant activity at 24 h when administered orally in comparison to drug solution. These results confirm the potential of SLNs in enhancing chemical stability and improving the efficacy of DLX via oral route. The SLN dispersion was converted into solid granules by adsorbing on colloidal silicon dioxide and characterized for particle size after redispersion, morphology, and flow properties. Results indicated that nanoparticles were successfully adsorbed on the carrier and released SLNs when dispersed in water.     

Evaluation of alternative strategies to optimize ketorolac transdermal delivery

In the present study, 2 alternative strategies to optimize ketorolac transdermal delivery, namely, prodrugs (polyoxyethylene glycol ester derivatives, I–IV) and nanostructured lipid carriers (NLC) were investigated. The synthesized prodrugs were chemically stable and easily degraded to the parent drug in human plasma. Ketorolac-loaded NLC with high drug content could be successfully prepared. The obtained products formulated into gels showed a different trend of drug permeation through human stratum corneum and epidermis. Particularly, skin permeation of ester prodrugs was significantly enhanced, apart from ester IV, compared with ketorolac, while the results of drug release from NLC outlined that these carriers were ineffective in increasing ketorolac percutaneous absorption owing to a higher degree of mutual interaction between the drug and carrier lipid matrix. Polyoxyethylene glycol esterification confirmed to be a suitable approach to enhance ketorolac transdermal delivery, while NLC seemed more appropriate for sustained release owing to the possible formation of a drug reservoir into the skin. Published: August 4, 2006