Actin from Thyone sperm assembles on only one end of an actin filament: a behavior regulated by profilin

Thyone sperm were demembranated with Triton X-100 and, after washing, extracted with 30 mM Tris at pH 8.0 and 1 mM MgCl2. After the insoluble contaminants were removed by centrifugation, the sperm extract was warmed to 22 degrees C. Actin filaments rapidly assembled and aggregated into bundles when KCl was added to the extract. When we added preformed actin filaments, i.e., the acrosomal filament bundles of Limulus sperm, to the extract, the actin monomers rapidly assembled on these filaments. What was unexpected was that assembly took place on only one end of the bundle--the end corresponding to the preferred end for monomer addition. We showed that the absence of growth on the nonpreferred end was not due to the presence of a capper because exogenously added actin readily assembled on both ends. We also analyzed the sperm extract by SDS gel electrophoresis. Two major proteins were present in a 1:1 molar ratio: actin and a 12,500-dalton protein whose apparent isoelectric point was 8.4. The 12,500-dalton protein was purified by DEAE chromatography. We concluded that it is profilin because of its size, isoelectric point, molar ratio to actin, inability to bind to DEAE, and its effect on actin assembly. When profilin was added to actin in the presence of Limulus bundles, addition of monomers on the nonpreferred end of the bundle was inhibited, even though actin by itself assembled on both ends. Using the Limulus bundles as nuclei, we determined the critical concentration for assembly off each end of the filament and estimated the Kd for the profilin-actin complex (approximately 10 microM). We present a model to explain how profilin may regulate the extension of the Thyone acrosomal process in vivo: The profilin-actin complex can add to only the preferred end of the filament bundle. Once the actin monomer is bound to the filament, the profilin is released, and is available to bind to additional actin monomers. This mechanism accounts for the rapid rate of filament elongation in the acrosomal process in vivo.     

Movement of the actin filament bundle in Mytilus sperm: a new mechanism is proposed

An actin filament bundle approximately 2-5 microns in length is present in the sperm of the blue mussel, Mytilus. In unfired sperm this bundle extends from the midpiece through a canal in the center of the nucleus to terminate on the membrane limiting the inside of the cone-shaped acrosomal vacuole. The bundle is composed of 45-65 actin filaments which are hexagonally packed and regularly cross-bridged together to form an actin paracrystal so well ordered that it has six nearly equal faces. Upon induction of the acrosomal reaction, a needle-like process is formed in a few seconds. Within this process is the actin filament bundle which appears unchanged in filament number and packing as determined by optical diffraction methods. Using fluorescein-conjugated phalloidin we were able to establish that the bundle does not change length but instead is projected anteriorly out of the midpiece and nuclear canal like an arrow. Existing mechanisms to explain this extension cannot apply. Specifically, the bundle does not increase in length (no polymerization), does not change its organization (no change in actin twist), does not change filament number (no filament sliding), and cannot move by myosin (wrong polarity). Thus we are forced to look elsewhere for a mechanism and have postulated that at least a component of this movement, or cell elongation, is the interaction of the actin filament bundle with the plasma membrane.     

Polymerization of actin. V. A new organelle, the actomere, that initates the assembly of actin filaments in Thyone sperm.

Between the acrosomal vacuole and the nucleus is a cup of amorphous material (profilactin) which is transformed into filaments during the acrosomal reaction. In the center of this cup in untreated Thyone sperm is a dense material which I refer to as the actomere; it is composed of 20-25 filaments embedded in a dense matrix. To visualize the substructure of the actomere, the profilactin around it must be removed. This is achieved either by demembranating the sperm with Triton X-100 and then raising the pH to 8.0, or by adding inophores to intact sperm at pH 8.0. Under these conditions, the actomere remains as a unit while the rest of the profilactin is solubilized or polymerized. When demembranated sperm are incubated under conditions in which the actin should polymerize, filaments grow from the end of the actomere: the actomere thus appears to behave as a nucleating body. This observation is strengthened by experiments in which untreated sperm are incubated in seawater or isotonic NaCl at pH 7.0 and the ionophore X537A is added; in this case, only a partial polymerization of the actin occurs and the acrosomal vacuole does not fuse with the cell surface. The actin filaments that do form, however, are attached to the apical end of the actomere. In fact, the elongating filaments push their way into and frequently through the acrosomal vacuole. Thus, it appears that the sperm organizes the actin filaments by controlling their nucleation. My model is that the cell controls the ammount of unbound actin such that it is slightly above the critical concentration for polymerization. Then, spontaneous nucleation is unfavored and polymerization would proceed from existing nuclei such as the actomer.     

polymerization of actin: v.a new organelle, the actomere, that initiates the assembly of actin filaments in thyone sperm

Between the acrosomal vacuole and the nucleus is a cup of amorphous material (profilactin) which is transformed into filaments during the acrosomal reaction. In the center of this cup in untreated Thyone sperm is a dense material which I refer to as the actomere; it is composed of 20-25 filaments embedded in a dense matrix. To visualize the substructure of the actomere, the profilactin around it must be removed. This is achieved either by demembranating the sperm with Triton X-100 and then raising the pH to 8.0, or by adding ionophores to intact sperm at pH 8.0. Under these conditions, the actomere remains as a unit while the rest of the profilactin is solubilized or polymerized. When demembranated sperm are incubated under conditions in which the actin should polymerize, filaments grow from the end of the actomere: the actomere thus appears to behave as a nucleating body. This observation is strengthened by experiments in which untreated sperm are incubated in seawater or isotonic NaCl at pH 7.0 and the ionophore X537A is added; in this case, only a partial polymerization of the actin occurs and the acrosomal vacuole does not fuse with the cell surface. The actin filaments that do form, however, are attached to the apical end of the actomere. In fact, the elongating filaments push their way into and frequently through the acrosomal vacuole. Thus, it appears that the sperm organizes the actin filaments by controlling their nucleation. My model is that the cell controls the amount of unbound actin such that it is slightly above the critical concentration for polymerization. Then, spontaneous nucleation is unfavored and polymerization would proceed from existing nuclei such as the actomere.     

Polymerization of actin. VI. The polarity of the actin filaments in the acrosomal process and how it might be determined

The polarity of the actin filaments which assemble from the nucleating body or actomere of Thyone and Pisaster sperm was determined using myosin subfragment 1 decoration. The polarity was found to be unidirectional with the arrowheads pointing towards the cell center. When polymerization is induced at low temperature with concentrations of actin near the critical concentration for polymerization, elongation of filaments occurs preferentially off the apical end. If the sperm are induced to undergo the acrosomal reaction with an ionophore, the polarity of the actin filaments attached to the actomere is the same as that already described, but the filaments which polymerize parallel to, but peripheral to, those extending from the actomere are randomly polarized. These randomly polarized filaments appear to result from spontaneous nucleation. When sperm are induced to undergo the acrosomal reaction with eggs, the polarity of the actin filaments is also unidirectional with the arrowheads pointing towards the cell center. From these results we conclude: (a) that the actomere, by nucleating the polymerization of actin filaments, controls the polarity of the actin filaments in the acrosomal process, (b) that the actomere recognizes a surface of the actin monomer that is different from that surface recognized by the dense material attached to membranes, and (c) that egg myosin could not act to pull the sperm into the egg. Included is a discussion of how the observation that monomers add largely to one end of a decorated filament in vitro relates to these in vivo observations.     

Direct electron microscopic visualization of barbed end capping and filament cutting by intestinal microvillar 95-kdalton protein (villin): a new actin assembly assay using the Limulus acrosomal process

We have re-examined the Ca(++)-dependent interaction of an intestinal microvillar 95- kdalton protein (MV-95K) and actin using the isolated acrosomal process bundles from limulus sperm. Making use of the processes as nuclei for assembling actin filaments, we quantitatively and qualitatively examined MV-95K’s effect on filament assembly and on F- actin, both in the presence and in the absence of Ca(++). The acrosomal processes are particularly advantageous for this approach because they nucleate large numbers of filaments, they are extremely stable, and their morphology can be used to determine the polarity of any nucleated filaments. When filament nucleation was initiated in the presence of MV-95K and the absence of Ca(++), there was biased filament assembly from the bundle ends. The calculated elongation rates from both the barbed and pointed filament ends were virtually indistinguishable from control preparations. In the presence of Ca(++), MV-95K completely inhibited filament assembly from the barbed filament end without affecting the initial rate of assembly from the pointed filament end. The inhibition of assembly results from MV-95K binding to and capping the barbed filament end, thereby preventing monomer addition. This indicates that, while MV-95K is a potent nucleator of actin assembly, it is also a potent inhibitor of actin filament elongation. To examine the effects of MV-95K on F-actin in the presence of Ca(++), we developed an assay where MV-95K is added to filaments previously assembled from acrosomal processes without causing filament breakage during mixing. These results clearly demonstrated that rapid filament shortening by MV-95K results through a mechanism of disrupting intrafilament monomer-monomer interactions. Finally, we show that tropomyosin-containing actin filaments are insensitive to cutting, but not to capping, by MV-95K in the presence of Ca(++).     

Organization of Actin Filaments in the Axial Rod of Abalone Sperm Revealed by Quick Freeze Technique

An axial rod in abalone ( Haliotis discus ) sperm is a structure composed of a bundle of actin filaments, which elongates anteriorly to form the acrosomal process during the acrosome reaction. The ultrastructure of the actin filament bundle constituting the axial rod was examined using quick freeze technique followed by either freeze-substitution or deep-etch electron microscopy. Thin sections of quick freeze and freeze-substituted sperm revealed that the actin filaments in the axial rod are hexagonally packed in a paracrystalline array through its almost entire length with an average center-to-center spacing of 12 nm. Periodic transverse bands were also observed across the actin filament bundle, which may reflect the cross-bridges interconnecting the adjacent filaments. Quick-freeze deep-etch analysis provided the three-dimensional view of the axial rod. Actin filaments exhibiting 5.5–6 nm spaced striations were observed to run in parallel with each other inside the axial rod. The existence of cross-bridging structures was also displayed between adjacent filaments. These results suggest that the actin filaments in the axial rod are probably held together by regularly spaced cross-bridges to form a well ordered hexagonally packed bundle, and also cross-linked by fibrous structure to the lateral inner acrosomal membrane which closely surrounds the anterior half of the actin filament bundle.     

Three-dimensional structure of a single filament in the Limulus acrosomal bundle: scruin binds to homologous helix-loop-beta motifs in actin

Frozen, hydrated acrosomal bundles from Limulus sperm were imaged with a 400 kV electron cryomicroscope. Segments of this long bundle can be studied as a P1 crystal with a unit cell containing an acrosomal filament with 28 actin and 28 scruin molecules in 13 helical turns. A novel computational procedure was developed to extract single columns of superimposed acrosomal filaments from the distinctive crystallographic view. Helical reconstruction was used to generate a three-dimensional structure of this computationally isolated acrosomal filament. The scruin molecule is organized into two domains which contact two actin subunits in different strands of the same actin filament. A correlation of Holmes' actin filament model to the density in our acrosomal filament map shows that actin subdomains 1, 2, and 3 match the model density closely. However, actin subdomain 4 matches rather poorly, suggesting that interactions with scruin may have altered actin conformation. Scruin makes extensive interactions with helix-loop-beta motifs in subdomain 3 of one actin subunit and in subdomain 1 of a consecutive actin subunit along the genetic filament helix. These two actin subdomains are structurally homologous and are closely spaced along the actin filament. Our model suggests that scruin, which is derived from a tandemly duplicated gene, has evolved to bind structurally homologous but non-identical positions across two consecutive actin subunits.     

Crystallographic conformers of actin in a biologically active bundle of filaments

Actin carries out many of its cellular functions through its filamentous form; thus, understanding the detailed structure of actin filaments is an essential step in achieving a mechanistic understanding of actin function. The acrosomal bundle in the Limulus sperm has been shown to be a quasi-crystalline array with an asymmetric unit composed of a filament with 14 actin-scruin pairs. The bundle in its true discharge state penetrates the jelly coat of the egg. Our previous electron crystallographic reconstruction demonstrated that the actin filament cross-linked by scruin in this acrosomal bundle state deviates significantly from a perfect F-actin helix. In that study, the tertiary structure of each of the 14 actin protomers in the asymmetric unit of the bundle filament was assumed to be constant. In the current study, an actin filament atomic model in the acrosomal bundle has been refined by combining rigid-body docking with multiple actin crystal structures from the Protein Data Bank and constrained energy minimization. Our observation demonstrates that actin protomers adopt different tertiary conformations when they form an actin filament in the bundle. The scruin and bundle packing forces appear to influence the tertiary and quaternary conformations of actin in the filament of this biologically active bundle.     

Bending stiffness of a crystalline actin bundle

The acrosomal process of the sperm of the horseshoe crab (Limulus polyphemus) is a unique crystalline actin bundle, consisting of multiple actin filaments cross-linked by the actin-bundling protein, scruin. For successful fertilization, the acrosomal bundle must penetrate through a 30 microm thick jelly coat surrounding the egg and thus it must be sufficiently stiff. Here, we present two measurements of the bending stiffness of a single crystalline bundle of actin. Results from these measurements indicate that the actin:scruin composite bundle has an average elastic modulus of 2 GPa, which is similar to that of a single actin filament, and a bending stiffness that is more than two orders of magnitude larger than that of a bundle of uncross-linked actin filaments due to stiffening by the scruin matrix.     

Actin filament-membrane attachment: are membrane particles involved?

The association of actin filaments with membranes is an important feature in the motility of nonmuscle cells. We investigated the role of membrane particles in the attachment of actin filaments to membranes in those systems in which the attachment site can be identified. Freeze fractures through the end-on attachment site of the acrosomal filament bundles in Mytilus (mussel) and Limulus (horseshoe crab) sperm and the attachment site of the microvillar filament bundles in the brush border of intestinal epithelial cells were examined. There are no particles on the P face of the membrane at these sites in the sperm systems and generally none at these sites in microvilli. In microvilli, the actin filaments are also attached along their lengths to the membrane by bridges. When the isolated brush border is incubated in high concentrations of Mg++ (15 mM), the actin filaments form paracrystals and, as a result, the bridges are in register (330 A period). Under these conditions, alignment of the particles on the P face of the membrane into circumferential bands also occurs. However, these bands are generally separated by 800-900 A, indicating that all the bridges cannot be directly attached to membrane particles. Thus membrane particles are not directly involved in the attachment of actin filaments to membranes.     

Electron microscopic determination of the actin filament end at which cytochalasin B blocks monomer addition using the acrosomal actin bundle from horseshoe crab sperm

G-actin freed from exogenous ATP was added to the pieces of isolated acrosomal actin bundles from horseshoe crab sperm to form filaments as reported earlier (Tilney, L.G., Bonder, E.M., & DeRosier, D.J. (1981) J. Cell Biol. 90, 485-494). The growth of a filament was far more rapid at one end (the preferred end) than the other end. These ends were shown to correspond to the barbed and pointed ends, respectively, by decoration of the filaments with myosin subfragment 1. Cytochalasin B inhibited the monomer addition at the preferred end. This technique is useful in determining the ends to which actin filament end-binding proteins from nonmuscle cells bind, which are considered to regulate the actin polymerization in the cells.     

Capping one end of an actin filament affects elongation at the other end

The rates of elongation at the free ends of actin filaments were compared to those of intact filaments, when the one end was masked with muscle beta-actinin or cytochalasin D, using fixed actoheavy meromyosin and Limulus acrosomal actin bundles as seeds. Experimental conditions were chosen so as to prevent spontaneous filament formation as far as possible. The rate of elongation at the barbed end of fixed actoheavy meromyosin was reduced to about one-fourth when the other pointed end was capped by beta-actinin, and that at the pointed end was reduced to one-third when the barbed end was blocked by cytochalasin D. Similar effects were also observed with the packed actin bundles of horseshoe crab sperm, although the decreases in elongation were less marked: 50-60% of the control both in the presence of beta-actinin and cytochalasin D. To explain the peculiar "end effect" described above, it is proposed that possible conformational changes at one end of an actin filament caused by the binding of a capping substance are transmitted successively to the other end so as to affect the elongation there.     

Fine structure of unusual spermatozoa and spermiogenesis of the mite Megisthanus floridanus Banks, 1904 (Acari: Gamasida: Antennophorina)

The aflagellate spermatozoa of the gamasid mite Megisthanus floridanus are characterized by a large vacuole which contains a cytoplasmic column protruding into the vacuole from the region defined as the posterior part of the cell. The membrane of the column and the inner membrane of the posterior part of the cytoplasmic mantle (outer sheath) surrounding the vacuole bear numerous so-called cellular processes. However, most of the outer sheath is reduced and represented solely by a very thin membrane-like envelope. The posterior part of the cell bears extensive folds. The cell, or, more precisely, the column, shows a deep posterior invagination. This invagination contains extracellular material composed of thin filaments or strands. Peripheral folds emerging from the posterior rim of the cell form a thin-walled tube that contains the same material as the invagination. The elongated nucleus is attached to a peculiar acrosomal complex consisting of a flat acrosomal cisterna that parallels most of the cell membrane, an attachment cone, and a short acrosomal filament which is embedded in a narrow canal within the nucleus. The spermatozoa of M. floridanus represent a peculiar version of the vacuolated type of sperm known to be plesiomorphic within the anactinotrichid Acari. Some details of spermiogenesis are described and consequences for phylogenetic and systematic considerations are discussed.     

Structure of actin filament bundles from microvilli of sea urchin eggs

The detailed substructure of actin filament bundles in microvilli of fertilized sea urchin eggs has been studied by analysing electron microscope images of negatively stained specimens. Transverse stripes which repeat about every 130 Å along the axis of a bundle, as previously observed by Burgess & Schroeder (1977), reflect the positions of cross-bridges that connect the filaments into a bundle. Analysis of optical transforms of the micrographs reveals that there are approximately 14 actin monomers between cross-overs of the two long-pitch helical strands of the actin filaments, with three cross-bridges in this interval. The structure is basically similar to that of the hexagonally packed bundles prepared in vitro from high speed supernatants of sea urchin eggs by Kane (1975) and analyzed by DeRosier et al. (1977). One clear difference, however, is that the in vivo microvillar filament bundles are supercoiled, giving rise to long axial repeats of 1500 to 2000 Å.Computationally filtered images of regions that were only slightly supercoiled reveal the relative alignment of filaments within the bundles and show that crossbridges appear to interact with four actin monomers, apparently linking two actin monomers on one strand of one filament to the nearest two monomers on a neighbouring filament. However, the cross-bridges are not spaced at equal intervals corresponding to four actin subunits, presumably because of the lack of hexagonal symmetry in the individual filaments, which have about 14 actin monomers between cross-overs. Instead, the cross-bridges are arranged quasiequivalently along the longitudinal axis of the bundles, in steps of four or five actin subunit spacings (28 Å each).     

Under physiological conditions actin disassembles slowly from the nonpreferred end of an actin filament

Incubation of the isolated acrosomal bundles of Limulus sperm with skeletal muscle actin results in assembly of actin onto both ends of the bundles. Because of the taper of these cross-linked bundles of actin filaments, one can distinguish directly the preferred end for assembly from the nonpreferred end. Loss of growth with time from the nonpreferred end was directly assessed by electron microscopy and found to be dependent upon salt concentration. Under physiological conditions (100 mM KCl, 1 mM MgCl2) and excess ATP (0.5 mM), depolymerization of the newly assembled actin filaments at the nonpreferred end over an 8-h period was 0.024 micron/h. Thus, even after 8 h, 63% of the bundles retained significant growth on their nonpreferred ends, the average length being 0.21 micron +/- 0.04. However, in the presence of 1.2 mM CaCl2, disassembly of actin monomers from the nonpreferred end increased substantially. By 8 h, only 7% of the bundles retained any actin growth on the nonpreferred ends, and the depolymerization rate off the nonpreferred end was 0.087 micron/h. From these results we conclude that, in the absence of other cellular factors, disassembly of actin subunits from actin filaments (subunit exchange) is too slow to influence most of the motile events that occur in cells. We discuss how this relates to treadmilling.     

Structure of actin-containing filaments from two types of non-muscle cells

Bundles of actin-containing filaments from the acrosomal process of horseshoe crab sperm and from sea urchin egg contain a second protein having a molecular weight of about 55,000. Electron micrographs of these filamentous bundles show features reminiscent of paracrystalline arrays of actin except that bundles from the sea urchin egg have distinctive transverse bands every 110 Å. From optical diffraction patterns of the micrographs, we deduced very similar models for both structures. The models consist of hexagonal arrays of actin filaments cross-linked by the second protein. The pattern of transverse bands in bundles derived from the sea urchin eggs is accounted for by postulating that the second protein is bonded to actin only at positions where cross-linking can occur, rather than being bonded to every actin. The helical symmetry of the actin requires that the bonding contacts involved in the cross-linking be slightly different at different positions along the length of the bundle. The technique of image reconstruction was used to obtain a three-dimensional map of the bundles from the acrosomal process.     

Reconstitution in vitro of MSP-based filopodium extension in nematode sperm

The major sperm protein (MSP) motility system in nematode sperm is best known for propelling the movement of mature sperm, where it has taken over the role usually played by actin in amoeboid cell motility. However, MSP filaments also drive the extension of filopodia, transient organelles composed of a core bundle of MSP filaments, that form in the late in sperm development but are not found on crawling cells. We have reconstituted filopodial extension in vitro whereby thin bundles of MSP filaments, each enveloped by a membrane sheath at their growing end, elongated at rates up to 17 microm/min. These bundles often exceeded 500 microm in length but were comprised of filaments only 1 microm long. The reconstituted filopodia assembled in the same cell-free sperm extracts that produced MSP fibers, robust meshworks of filaments that exhibit the same organization and dynamics as the lamellipodial filament system that propels sperm movement. The filopodia and fibers that assembled in vitro both had a membranous structure at their growing end, shared four MSP accessory proteins, and responded identically to agents that alter MSP-based motility by modulating protein phosphorylation. However, filopodia grew three- to four-fold faster than fibers. The reconstitution of filopodial extension shows that, like the actin cytoskeleton, MSP filaments can adopt two architectures, bundles and meshworks, each capable of pushing against membranes to generate protrusion. The reconstitution of both forms of motility in the same in vitro system provides a promising avenue for understanding how the forces for membrane protrusion are produced.     

Actin filament turnover regulated by cross-linking accounts for the size, shape, location, and number of actin bundles in Drosophila bristles

Drosophila bristle cells are shaped during growth by longitudinal bundles of cross-linked actin filaments attached to the plasma membrane. We used confocal and electron microscopy to examine actin bundle structure and found that during bristle elongation, snarls of uncross-linked actin filaments and small internal bundles also form in the shaft cytoplasm only to disappear within 4 min. Thus, formation and later removal of actin filaments are prominent features of growing bristles. These transient snarls and internal bundles can be stabilized by culturing elongating bristles with jasplakinolide, a membrane-permeant inhibitor of actin filament depolymerization, resulting in enormous numbers of internal bundles and uncross-linked filaments. Examination of bundle disassembly in mutant bristles shows that plasma membrane association and cross-bridging adjacent actin filaments together inhibits depolymerization. Thus, highly cross-bridged and membrane-bound actin filaments turn over slowly and persist, whereas poorly cross-linked filaments turnover more rapidly. We argue that the selection of stable bundles relative to poorly cross-bridged filaments can account for the size, shape, number, and location of the longitudinal actin bundles in bristles. As a result, filament turnover plays an important role in regulating cytoskeleton assembly and consequently cell shape.     

Membrane events in the acrosomal reaction of Limulus sperm. Membrane fusion, filament-membrane particle attachment, and the source and formation of new membrane surface

The membranes of Limulus (horseshoe crab) sperm were examined before and during the acrosomal reaction by using the technique of freeze-fracturing and thin sectioning. We focused on three areas. First, we examined stages in the fusion of the acrosomal vacuole with the cell surface. Fusion takes place in a particle-free zone which is surrounded by a circlet of particles on the P face of the plasma membrane and an underlying circlet of particles on the P face of the acrosomal vauole membrane. These circlets of particles are present before induction. Up to nine focal points of fusion occur within the particle-free zone. Second, we describe a system of fine filaments, each 30 A in diameter, which lies between the acrosomal vacuole and the plasma membrane. These filaments change their orientation as the vacuole opens, a process that takes place in less than 50 ms. Membrane particles seen on the P face of the acrosomal vacuole membrane change their orientation at the same time and in the same way as do the filaments, thus indicating that the membrane particles and filaments are probably connected. Third, we examined the source and the point of fusion of new membrane needed to cover the acrosomal process. This new membrane is almost certainly derived from the outer nuclear envelope and appears to insert into the plasma membrane in a particle-free area adjacent to an area rich in particles. The latter is the region where the particles are probably connected to the cytoplasmic filaments. The relevance of these observations in relation to the process of fertilization of this fantastic sperm is discussed.