Substrate specificity of E. coli uridine phosphorylase. Further evidences of high-syn conformation of the substrate in uridine phosphorolysis

Twenty five uridine analogues have been tested and compared with uridine with respect to their potency to bind to E. coli uridine phosphorylase. The kinetic constants of the phosphorolysis reaction of uridine derivatives modified at 2′-, 3′- and 5′-positions of the sugar moiety and 2-, 4-, 5- and 6-positions of the heterocyclic base were determined. The absence of the 2′- or 5′-hydroxyl group is not crucial for the successful binding and phosphorolysis. On the other hand, the absence of both the 2′- and 5′-hydroxyl groups leads to the loss of substrate binding to the enzyme. The same effect was observed when the 3′-hydroxyl group is absent, thus underlining the key role of this group. Our data shed some light on the mechanism of ribo- and 2′-deoxyribonucleoside discrimination by E. coli uridine phosphorylase and E. coli thymidine phosphorylase. A comparison of the kinetic results obtained in the present study with the available X-ray structures and analysis of hydrogen bonding in the enzyme-substrate complex demonstrates that uridine adopts an unusual high-syn conformation in the active site of uridine phosphorylase.     

Crystal structures of human NUDT5 reveal insights into the structural basis of the substrate specificity

Human NUDT5 (hNUDT5) is an ADP-ribose pyrophosphatase (ADPRase) belonging to the Nudix hydrolase superfamily. It presumably plays important roles in controlling the intracellular level of ADP-ribose (ADPR) to prevent non-enzymatic ADP-ribosylation by hydrolyzing ADPR to AMP and ribose 5'-phosphate. We report here the crystal structures of hNUDT5 in apo form, in complex with ADPR, and in complex with AMP with bound Mg2+. hNUDT5 forms a homodimer with substantial domain swapping and assumes a structure more similar to Escherichia coli ADPRase ORF209 than human ADPRase NUDT9. The adenine moiety of the substrates is specifically recognized by the enzyme via hydrogen-bonding interactions between N1 and N6 of the base and Glu47 of one subunit, and between N7 of the base and Arg51 of the other subunit, providing the molecular basis for the high selectivity of hNUDT5 for ADP-sugars over other sugar nucleotides. Structural comparisons with E. coli ADPRase ORF209 and ADPXase ORF186 indicate that the existence of an aromatic residue on loop L8 in ORF186 seems to be positively correlated with its enzymatic activity on APnA, whereas hNUDT5 and ORF209 contain no such residue and thus have low or no activities on APnA.     

Structural and biochemical basis for the substrate specificity of Pad-1, an indole-3-pyruvic acid aminotransferase in auxin homeostasis

Phytohormone indole-3-acetic acid (IAA) plays a vital role in regulating plant growth and development. Tryptophan-dependent IAA biosynthesis participates in IAA homeostasis by producing IAA via two sequential reactions, which involve a conversion of tryptophan to indole-3-pyruvic acid (IPyA) by tryptophan aminotransferase (TAA1) followed by the irreversible formation of IAA in the second reaction. Pad-1 from Solanaceae plants regulates IAA levels by catalyzing a reverse reaction of the first step of IAA biosynthesis. Pad-1 is a pyridoxal phosphate (PLP)-dependent aminotransferase, with IPyA as the amino acceptor and l-glutamine as the amino donor. Currently, the structural and functional basis for the substrate specificity of Pad-1 remains poorly understood. In this study, we carried out structural and kinetic analyses of Pad-1 from Solanum melongena. Pad-1 is a homodimeric enzyme, with coenzyme PLP present between a central large α/β domain and a protruding small domain. The active site of Pad-1 includes a vacancy near the phosphate group (P-side) and the 3′-O (O-side) of PLP. These features are distinct from those of TAA1, which is homologous in an overall structure with Pad-1 but includes only the P-side region in the active site. Kinetic analysis suggests that P-side residues constitute a binding pocket for l-glutamine, and O-side residues of Phe124 and Ile350 are involved in the binding of IPyA. These studies illuminate distinct differences in the active site between Pad-1 and TAA1, and provide structural and functional insights into the substrate specificity of Pad-1.     

Crystal structures of Paenibacillus polymyxa beta-glucosidase B complexes reveal the molecular basis of substrate specificity and give new insights into the catalytic machinery of family I glycosidases

Bacteria species involved in degradation of cellulosic substrates produce a variety of enzymes for processing related compounds along the hydrolytic pathway. Paenibacillus polymyxa encodes two homologous beta-glucosidases, BglA and BglB, presenting different quaternary structures and substrate specificities. We previously reported the 3D-structure of BglA, which is highly specific against cellobiose. Here, we present structural analysis of BglB, a monomeric enzyme that acts as an exo-beta-glucosidase hydrolyzing cellobiose and cellodextrins of higher degree of polymerization. The crystal structure of BglB shows that several polar residues narrow the active site pocket and contour additional subsites. The structure of the BglB-cellotetraose complex confirms these subsites, revealing the substrate-binding mode, and shows the oligosaccharide-enzyme recognition pattern in detail. Comparison between BglA and BglB crystal structures suggests that oligomerization in BglA can assist in fine-tuning the specificity of the active centre by modulating the loops surrounding the cavity. We have solved the crystal structure of BglB with bound thiocellobiose, a competitive inhibitor, which together with the BglB-cellotetraose complex delineate the general features of the aglycon site. The detailed characterization of the atomic interactions at the aglycon site show a recognition pattern common to all bacterial beta-glucosidases, and presents some differences with the aglycon site in plant beta-glycosidases essentially by means of a different orientation of the basal Trp. The crystal structures of of BglB with a covalently bound inhibitor (derived from 2-fluoroglucoside) and glucose (produced by hydrolysis of the substrate in the crystal), provide additional pictures of the binding events and the intermediates formed during the reaction. Altogether, this information can assist in the understanding of subtle differences of the enzyme mechanism and substrate recognition within this family of enzymes, and consequently it can help in the development of new enzymes with improved activity or specificity.     

Crystal structure of Escherichia coli ketopantoate reductase in a ternary complex with NADP+ and pantoate bound: substrate recognition, conformational change, and cooperativity

Ketopantoate reductase (KPR, EC 1.1.1.169) catalyzes the NADPH-dependent reduction of ketopantoate to pantoate, an essential step for the biosynthesis of pantothenate (vitamin B5). Inhibitors of the enzymes of this pathway have been proposed as potential antibiotics or herbicides. Here we present the crystal structure of Escherichia coli KPR in a precatalytic ternary complex with NADP+ and pantoate bound, solved to 2.3 A of resolution. The asymmetric unit contains two protein molecules, each in a ternary complex; however, one is in a more closed conformation than the other. A hinge bending between the N- and C-terminal domains is observed, which triggers the switch of the essential Lys176 to form a key hydrogen bond with the C2 hydroxyl of pantoate. Pantoate forms additional interactions with conserved residues Ser244, Asn98, and Asn180 and with two conservatively varied residues, Asn194 and Asn241. The steady-state kinetics of active site mutants R31A, K72A, N98A, K176A, S244A, and E256A implicate Asn98 as well as Lys176 and Glu256 in the catalytic mechanism. Isothermal titration calorimetry studies with these mutants further demonstrate the importance of Ser244 for substrate binding and of Arg31 and Lys72 for cofactor binding. Further calorimetric studies show that KPR discriminates binding of ketopantoate against pantoate only with NADPH bound. This work provides insights into the roles of active site residues and conformational changes in substrate recognition and catalysis, leading to the proposal of a detailed molecular mechanism for KPR activity.     

Multiple regulation of nucleoside catabolizing enzymes in Escherichia coli: effects of 3:5'' cyclic AMP and CRP protein.

Summary The regulation of the synthesis of nucleoside metabolizing enzymes has been studied in cya and crp mutant strains of Escherichia coli.The synthesis of the cyt-enzymes, cytidine deaminase and uridine phosphorylase regulated by the cytR gene product, is activated by the cAMP-CRP complex. On the other hand the synthesis of the deoenzymes: deoxyriboaldolase, thymidine phosphorylase, phosphodeoxyribomutase and purine nucleoside phosphorylase, appears to be increased if an active cAMP-CRP complex cannot be formed.It also seems that nucleosides serve as poor carbon sources for cya and crp mutants; this could not solely be explained by low levels of nucleoside metabolizing enzymes nor by a deficiency in nucleoside uptake. Addition of casamino acids stimulated the growth of cya and crp mutants, with nucleosides as carbon sources. When grown on glucose and casamino acids growth could be stimulated by adenine and hypoxanthine nucleosides; these results suggest an impaired nitrogen metabolism in cya and crp mutants.Abbreviations and Symbols cAMP cyclic adenosine 3:5-monophosphate - CRP cAMP receptor protein. Genes coding for: adenyl cyclase - cya cAMP receptor protein - crp cytidine deaminase - cdd uridine phosphorylase - udp thymidine phosphorylase - tpp purine nucleoside phosphorylase - pup; cytR regulatory gene for cdd, udp, dra, tpp, drm, and pup - deoR regulatory gene for dra, tpp, drm, and pup     

Structural insights into the substrate specificity and function of Escherichia coli K12 YgjK, a glucosidase belonging to the glycoside hydrolase family 63

Proteins belonging to the glycoside hydrolase family 63 (GH63) are found in bacteria, archaea, and eukaryotes. Eukaryotic GH63 proteins are processing α-glucosidase I enzymes that hydrolyze an oligosaccharide precursor of eukaryotic N-linked glycoproteins. In contrast, the functions of the bacterial and archaeal GH63 proteins are unclear. Here we determined the crystal structure of a bacterial GH63 enzyme, Escherichia coli K12 YgjK, at 1.78 Å resolution and investigated some properties of the enzyme. YgjK consists of the N-domain and the A-domain, joined by a linker region. The N-domain is composed of 18 antiparallel β-strands and is classified as a super-β-sandwich. The A-domain contains 16 α-helices, 12 of which form an (α/α)₆-barrel; the remaining 4 α-helices are found in an extra structural unit that we designated as the A′-region. YgjK, a member of the glycoside hydrolase clan GH-G, shares structural similarity with glucoamylase (GH15) and chitobiose phosphorylase (GH65), both of which belong to clan GH-L. In crystal structures of YgjK in complex with glucose, mannose, and galactose, all of the glucose, mannose, and galactose units were located in the catalytic cleft. YgjK showed the highest activity for the α-1,3-glucosidic linkage of nigerose, but also hydrolyzed trehalose, kojibiose, and maltooligosaccharides from maltose to maltoheptaose, although the activities were low. These findings suggest that YgjK is a glucosidase with relaxed specificity for sugars.     

Anomeric specificity of glucose uptake systems in Lactococcus cremoris, Escherichia coli, and Saccharomyces cerevisiae: mechanism, kinetics, and implications

The mechanism and kinetics of the glucose uptake systems of three representative microorganisms are studied during cultivation in a chemostat. The three microorganisms are Lactococcus cremoris, Escherichia coli, and Saccharomyces cervisiae. Two models describing respectively competitive and independent uptake of the two glucose anomers are tested on experimental data where alpha- and beta-glucose are determined by flow injection analysis after pulse addition of the pure anomers to a chemostat. The very accurate experimental results are used to give a convincingly clear model discrimination for all three microorganisms. The uptake of glucose by S. cervisiae occurs by a competitive mechanism with preference for alpha-glucose (K(alpha) = 32 mg/L and K(beta) = 48 mg/L). Surprisingly, the glucose uptake by the two bacteria is shown to be mediated by anomer specific transport systems with no competitive inhibition from the other glucose anomer. This novel finding has not been described in the literature on the phosphotransferase system. In L. cremoris the relative uptake rates of the glucose anomers match the equilibrium composition exactly (36% alpha-glucose). In E. coli the relative uptake rate of alpha-glucose at glucose unlimited growth is 26%, which means preference for beta-glucose. However, the saturation constants of the two sites in E. coli are K(alpha) = 2 mg/L and K(alpha) = 15 mg/L, and a preference for alpha-glucose is exhibited at very low glucose concentrations. The results are of considerable improtance in relation to enzyme based on-line measurements during fermentations as well as to the modeling of glucose limited growth and product formation.     

Molecular basis for acceptor substrate specificity of the human beta1,3-glucuronosyltransferases GlcAT-I and GlcAT-P involved in glycosaminoglycan and HNK-1 carbohydrate epitope biosynthesis, respectively

The human beta1,3-glucuronosyltransferases galactose-beta1,3-glucuronosyltransferase I (GlcAT-I) and galactose-beta1,3-glucuronosyltransferase P (GlcAT-P) are key enzymes involved in proteoglycan and HNK-1 carbohydrate epitope synthesis, respectively. Analysis of their acceptor specificity revealed that GlcAT-I was selective toward Galbeta1,3Gal (referred to as Gal2-Gal1), whereas GlcAT-P presented a broader profile. To understand the molecular basis of acceptor substrate recognition, we constructed mutants and chimeric enzymes based on multiple sequence alignment and structural information. The drastic effect of mutations of Glu227, Arg247, Asp252, and Glu281 on GlcAT-I activity indicated a key role for the hydrogen bond network formed by these four conserved residues in dictating Gal2 binding. Investigation of GlcAT-I determinants governing Gal1 recognition showed that Trp243 could not be replaced by its counterpart Phe in GlcAT-P. This result combined with molecular modeling provided evidence for the importance of stacking interactions with Trp at position 243 in the selectivity of GlcAT-I toward Galbeta1,3Gal. Mutation of Gln318 predicted to be hydrogen-bonded to 6-hydroxyl of Gal1 had little effect on GlcAT-I activity, reinforcing the role of Trp243 in Gal1 binding. Substitution of Phe245 in GlcAT-P by Ala selectively abolished Galbeta1,3Gal activity, also highlighting the importance of an aromatic residue at this position in defining the specificity of GlcAT-P. Finally, substituting Phe245, Val320, or Asn321 in GlcAT-P predicted to interact with N-acetylglucosamine (GlcNAc), by their counterpart in GlcAT-I, moderately affected the activity toward the reference substrate of GlcAT-P, N-acetyllactosamine, indicating that its active site tolerates amino acid substitutions, an observation that parallels its promiscuous substrate profile. Taken together, the data clearly define key residues governing the specificity of beta1,3-glucuronosyltransferases.     

X-ray fibre diffraction study of conformational changes in hyaluronate induced in the presence of sodium,potassium and calcium cations

Hyaluronate purified from all cations by ion exchange chromatography was introduced to the cations sodium, potassium and calcium in a controlled way. The conformations formed in the presence of these ions were studied as a function of ionic strength, hydrogen ion activity, humidity and temperature using X-ray fibre diffraction. In sodium hyaluronate above pH 4.0 a contracted helix is found which approximates to a four-fold helix with an axial rise per disaccharide of 0.84 nm. There is no requirement for water molecules in the unit cell as the Na⁺ can be coordinate by the hyaluronate chains alone. On crystallizing hyaluronate below pH 4.0 an extended 2-fold helix with an axial rise per disaccharide of 0.98 nm is formed. In the presence of potassium above pH 4.0 a conformation similar, but not identical, to that of sodium was found where the helix backbone is again four-fold with an axial rise per disaccharide h=0.90 nm. To maintain the coordination of the potassium ion, four water molecule/disaccharide are required and on removal of these the conformation is destabilized going to a new helix where n = 4 and h = 0.97 nm. Below pH 4.0 the conformation is a contracted 4-fold helix with h = 0.82 nm. In this structure two antiparallel chains intertwine to form a double helix. The packing of the double helical units is stabilized by water molecules, the unit cell requiring 8 water molecules/disaccharide. Formation of the calcium hyaluronate complex above pH 3.5 yields a three-fold helix with h = 0.95 nm. The requirement for water in the unit cell to maintain full crystallinity is high, at 9 water molecules/disaccharide; however, on removal of this water, though the crystallinity is disrupted, the conformation remains constant. The acid form of calcium-hyaluronate yields an equivalent conformation to that of sodium under the same condition, i.e. a helix with n = 2, h = 0.98 nm. The presence of small quantities of calcium in what are otherwise potassium or sodium solutions of hyaluronate yield the 3-fold conformation for hyaluronate. Thus calcium has an important role to play in deciding the dominating conformation present in hyaluronate. The variety of conformations yielded by the different cations indicates a subtle interaction between hyaluronate and its environment, in which the balance between the cations will control to some degree the interactions between hyaluronate chains and thus affect the mechanical properties of the matrix which they form. The conformations of individual chains are all stabilized in varying degrees by intra-chain hydrogen bonds.     

Crystal structures of Escherichia coli gamma-glutamyltranspeptidase in complex with azaserine and acivicin: novel mechanistic implication for inhibition by glutamine antagonists

γ-Glutamyltranspeptidase (GGT) catalyzes the cleavage of such γ-glutamyl compounds as glutathione, and the transfer of their γ-glutamyl group to water or to other amino acids and peptides. GGT is involved in a number of biological phenomena such as drug resistance and metastasis of cancer cells by detoxification of xenobiotics. Azaserine and acivicin are classical and irreversible inhibitors of GGT, but their binding sites and the inhibition mechanisms remain to be defined. We have determined the crystal structures of GGT from Escherichia coli in complex with azaserine and acivicin at 1.65 Å resolution. Both inhibitors are bound to GGT at its substrate-binding pocket in a manner similar to that observed previously with the γ-glutamyl-enzyme intermediate. They form a covalent bond with the O^γ atom of Thr391, the catalytic residue of GGT. Their α-carboxy and α-amino groups are recognized by extensive hydrogen bonding and charge interactions with the residues that are conserved among GGT orthologs. The two amido nitrogen atoms of Gly483 and Gly484, which form the oxyanion hole, interact with the inhibitors directly or via a water molecule. Notably, in the azaserine complex the carbon atom that forms a covalent bond with Thr391 is sp³-hybridized, suggesting that the carbonyl of azaserine is attacked by Thr391 to form a tetrahedral intermediate, which is stabilized by the oxyanion hole. Furthermore, when acivicin is bound to GGT, a migration of the single and double bonds occurs in its dihydroisoxazole ring. The structural characteristics presented here imply that the unprecedented binding modes of azaserine and acivicin are conserved in all GGTs from bacteria to mammals and give a new insight into the inhibition mechanism of glutamine amidotransferases by these glutamine antagonists.     

Crystal structure and substrate specificity of ExoY,a unique T3SS mediated secreted nucleotidyl cyclase toxin from Pseudomonas aeruginosa

Background

The nucleotidyl cyclase toxin ExoY is an important virulence determinant of Pseudomonas aeruginosa that causes severe acute and chronic infections in immune-compromised individuals. Additionally, this unique T3SS effector shows a striking preference for cUMP, a newly identified non-canonical secondary messenger. Thereby, ExoY is also considered as a potential tool to study unexplored cUMP signaling pathways.

Multiple modes of ligand recognition: Crystal structures of cyclin-dependent protein kinase 2 in complex with ATP and two inhibitors,olomoucine and isopentenyladenine

Cyclin-dependent kinases (CDKs) are conserved regulators of the eukaryotic cell cycle with different isoforms controlling specific phases of the cell cycle. Mitogenic or growth inhibitory signals are mediated, respectively, by activation or inhibition of CDKs which phosphorylate proteins associated with the cell cycle. The central role of CDKs in cell cycle regulation makes them a potential new target for inhibitory molecules with anti-proliferative and/or anti-neoplastic effects. We describe the crystal structures of the complexes of CDK2 with a weakly specific CDK inhibitor, N6-(δ2-isopentenyl)adenine, and a strongly specific inhibitor, olomoucine. Both inhibitors are adenine derivatives and bind in the adenine binding pocket of CDK2, but in an unexpected and different orientation from the adenine of the authentic ligand ATP. The N6-benzyl substituent in olomoucine binds outside the conserved binding pocket and is most likely responsible for its specificity. The structural information from the CDK2-olomoucine complex will be useful in directing the search for the next generation inhibitors with improved properties. © 1995 Wiley-Liss, Inc.     

F0 cysteine,bCys21, in the Escherichia coli ATP synthase is involved in regulation of potassium uptake and molecular hydrogen production in anaerobic conditions

The single cysteine in the b subunit of the membranous F₀ sector and the 19 cysteines in extramembranous F₁ sector of the Escherichia coli ATP synthase were replaced by alanine. When cells were grown under anaerobic conditions on glucose, the k _cat for ATP hydrolysis of membrane vesicles containing the bCys21Ala mutant enzyme, but not enzymes with other cysteine replacements, was lower, while ATP-driven H⁺ pumping was unchanged. However, the ATP-dependent increase in the number of accessible thiol groups in membrane vesicles was negated. Furthermore, K⁺ uptake and molecular hydrogen production by whole cells and protoplasts was greatly decreased. These results indicate a role for the F₀ subunit bCys21 in the functionality of F₀F₁ and coupling to other membranous activities under fermentative conditions.     

Crystal structures of Tritrichomonasfoetus inosine monophosphate dehydrogenase in complex with substrate,cofactor and analogs: a structural basis for the random-in ordered-out kinetic mechanism

The enzyme inosine monophosphate dehydrogenase (IMPDH) is responsible for the rate-limiting step in guanine nucleotide biosynthesis. Because it is up-regulated in rapidly proliferating cells, human type II IMPDH is actively targeted for immunosuppressive, anticancer, and antiviral chemotherapy. The enzyme employs a random-in ordered-out kinetic mechanism where substrate or cofactor can bind first but product is only released after the cofactor leaves. Due to structural and kinetic differences between mammalian and microbial enzymes, most drugs that are successful in the inhibition of mammalian IMPDH are far less effective against the microbial forms of the enzyme. It is possible that with greater knowledge of the structural mechanism of the microbial enzymes, an effective and selective inhibitor of microbial IMPDH will be developed for use as a drug against multi-drug resistant bacteria and protists. The high-resolution crystal structures of four different complexes of IMPDH from the protozoan parasite Tritrichomonas foetus have been solved: with its substrate IMP, IMP and the inhibitor mycophenolic acid (MPA), the product XMP with MPA, and XMP with the cofactor NAD(+). In addition, a potassium ion has been located at the dimer interface. A structural model for the kinetic mechanism is proposed.     

Crystal structure of D-psicose 3-epimerase from Agrobacterium tumefaciens and its complex with true substrate D-fructose: a pivotal role of metal in catalysis, an active site for the non-phosphorylated substrate, and its conformational changes

D-psicose, a rare sugar produced by the enzymatic reaction of D-tagatose 3-epimerase (DTEase), has been used extensively for the bioproduction of various rare carbohydrates. Recently characterized D-psicose 3-epimerase (DPEase) from Agrobacterium tumefaciens was found to belong to the DTEase family and to catalyze the interconversion of D-fructose and D-psicose by epimerizing the C-3 position, with marked efficiency for D-psicose. The crystal structures of DPEase and its complex with the true substrate D-fructose were determined; DPEase is a tetramer and each monomer belongs to a TIM-barrel fold. The active site in each subunit is distinct from that of other TIM-barrel enzymes, which use phosphorylated ligands as the substrate. It contains a metal ion with octahedral coordination to two water molecules and four residues that are absolutely conserved across the DTEase family. Upon binding of D-fructose, the substrate displaces water molecules in the active site, with a conformation mimicking the intermediate cis-enediolate. Subsequently, Trp112 and Pro113 in the beta4-alpha4 loop undergo significant structural changes, sealing off the active site. Structural evidence and site-directed mutagenesis of the putative catalytic residues suggest that the metal ion plays a pivotal role in catalysis by anchoring the bound D-fructose, and Glu150 and Glu244 carry out an epimerization reaction at the C-3 position.