Highly enantiomeric reduction of acetophenone and its derivatives by locally isolated Rhodotorula glutinis

Ninety isolates of microorganisms belonging to different taxonomical groups (30 bacteria, 20 yeast, and 40 fungi) were previously isolated from various samples. These isolates were screened as reducing agents for acetophenone 1a to phenylethanol 2a . It was found that the isolate EBK‐10 was the most effective biocatalyst for the enantioselective bioreduction of acetophenone. This isolate was identified as Rhodotorula glutinis by the VITEK 2 Compact system. The various parameters (pH 6.5, temperature 32°C, and agitation 200 rpm) of the bioreduction reaction was optimized, which resulted in conversions up to 100% with >99% enantiomeric excesses (ee) of the S‐configuration. The preparative scale bioreduction of acetophenone 1a by R. glutinis EBK‐10 gave (S)‐1‐phenylethanol 2a in 79% yield, complete conversion, and >99% ee. In addition, R.glutinis EBK‐10 successfully reduced various substituted acetophenones. Chirality, 2010. © 2010 Wiley‐Liss, Inc.     

An approach toward optimization of the influential growth determinants of opportunistic yeast isolate Pichia guilliermondii

The present study reports statistical optimization of growth conditions of an opportunistic fungal strain Pichia guilliermondii, isolated from the blood of patients suffering from bancroftian filariasis. Seven key determinants, namely, primary inoculums size (%), volume (mL) and pH of media, serum proportion, temperature (°C), incubation time (hr), and agitation speed (rpm) that influence in vitro growth of the pathogen were optimized statistically using response surface methodology (RSM). RSM with seven factors and two-level Box–Behnken design was employed for designing experimental run, prediction of case statistics, suitable exploration of quadratic response surfaces, and constructing a second-order polynomial equation. Analysis of variance (ANOVA) showed that primary inoculums size, volume of culture media, temperature, incubation time, and agitation speed exert most significant influence over fungal growth. The RSM study predicted that optimum fungal growth can be obtained using 10% primary inoculums size in 100 mL culture media with pH 6.0, 6.28% serum, 32.5°C temperature, and 24 hr of incubation, alongside agitation speed at 400 rpm. The desirability of the optimized growth model for P. guilliermondii is 99.123%, which indicated its accuracy and acceptability. Finally, the optimized growth module illustrated in the study could be useful in improving in vitro growth of clinically important P. guilliermondii.     

Response surface optimization of prodigiosin production by phthalate degrading Achromobacter denitrificans SP1 and exploring its antibacterial activity

Abstract

The role of various parameters like temperature, pH, blood bag concentration, agitation and incubation that influence the production of prodigiosin by Achromobacter denitrificans SP1 was determined. The Plackett–Burman and Box–Behnken experimental designs were employed to statistically optimize and find out the best combinational effect of parameters for the better yield of prodigiosin using blood bag as sole carbon and energy source for the growth of A. denitrificans SP1. The maximum (1.314?mg/ml) prodigiosin production was attained at a temperature of 24?°C, pH (8.8), and blood bag (1?g) as optimum; while the predicted value was 1.319?mg/ml with a correlation coefficient of 0.987; which signifies the fitness of the model. Antimicrobial activity of the prodigiosin was also evaluated and found to be an effective agent against bacterial pathogens including Staphylococcus aureus and Proteus mirabilis. Utilization of the plasticizer di (2-ethylhexyl)phthalate (DEHP) in blood bag and the production of antibacterial prodigiosin makes A. denitrificans SP1, an effective competitor toward the pathogenic bacterial disinfection and wastewater treatment processes.     

Statistical optimization for tannase production from <Emphasis Type="Italic">Aspergillus niger</Emphasis> under submerged fermentation

Statistically based experimental design was employed for the optimization of fermentation conditions for maximum production of enzyme tannase from Aspergillus niger. Central composite rotatable design (CCRD) falling under response surface methodology (RSM) was used. Based on the results of ‘one-at-a-time’ approach in submerged fermentation, the most influencing factors for tannase production from A. niger were concentrations of tannic acid and sodium nitrate, agitation rate and incubation period. Hence, to achieve the maximum yield of tannase, interaction of these factors was studied at optimum production pH of 5.0 by RSM. The optimum values of parameters obtained through RSM were 5% tannic acid, 0.8% sodium nitrate, 5.0 pH, 5 × 10⁷ spores/50mL inoculum density, 150 rpm agitation and incubation period of 48 h which resulted in production of 19.7 UmL⁻¹ of the enzyme. This activity was almost double as compared to the amount obtained by ‘one-at-a-time’ approach (9.8 UmL⁻¹).     

The headspace-GC/MS: Alternative methodology employed in the bioreduction of (4S)-(+)-carvone mediated by human skin fungus

Abstract

The development of more efficient and environmentally friendly analytical methods represents a current focus for the fine chemical industry. In particular, microscale methodologies that are free of solvents/reagents. The headspace-GC/MS (HS-GC) methodology was employed in this study as a tool for monitoring a biocatalysed reaction of (4S)-(+)-carvone using Phoma sp., a filamentous fungus from human skin. Biocatalysis provides some advantages, such as high efficiency, high degrees of regioselectivity, chemoselectivity, and enantioselectivity. In order to optimize the small scale biocatalytic reaction of the (4S)-(+)-carvone by the filamentous fungus Phoma sp. was used headspace GC/MS methodology, factorial design of experiments and the response surface methodology (RSM) was performed using the biomass of the fungus, substrate mass and pH as parameters. It was observed that for all reactions conditions tested, forming the products (1?R,4S)-dihydrocarvone and (1S,4S)-dihydrocarvone. The most influential factor was pH, with the highest conversion rate (>95%) and diastereomeric excess (d.e.) (>80%) obtained at pH 5.0. Thus, it was demonstrated that human skin Phoma sp. fungus showed significant bioreduction activity and that headspace GC/MS is an efficient approach for real-time monitoring the biocatalysed reactions.     

Enantioselective reduction of acetophenone and its derivatives with a new yeast isolate Candida tropicalis PBR-2 MTCC 5158

The enantioselective bioreduction of acetophenone and its various analogues has been carried out using a new yeast strain, Candida tropicalis MTCC 5158, to obtain the corresponding (S)-aryl ethanols with good yield and almost absolute enantioselectivity. The catalytic ability of this microbial strain for acetophenone reduction has been examined and also various parameters of the bioreduction reaction have been optimized. Studies on the catalytic performance showed that this microorganism is capable of carrying out the reduction in a broad range of pH (3-10) and temperature (25-40 degrees C), making it a more versatile biocatalyst. The preparative scale bioreduction of acetophenone using resting cells of Candida tropicalis yielded S-(-)-1-phenyl ethanol with 43% yield and >99% enantiomeric excess.     

Five-factor-at-a-time (FFAT) approach for optimal production of an extracellular RNase from Bacillus safensis RB-5

Abstract

A Gram-positive, rod-shaped, endospore-forming, and RNA-degrading bacterium RB-5 was isolated from a soil sample. Based on 16-rDNA gene sequence, the bacterium RB-5 was identified as Bacillus safensis (Accession number KX443714.1). The bacterium appeared to be related to Bacillus safensis KL-052, an other-member of genus Bacillus. One-factor-at-a-time (OFAT) and Response Surface Methodology (RSM) statistical approaches were used to optimize the fermentation broth to obtain an improved extracellular RNase production from B. safensis RB-5. These approaches improved RNase activity of B. safensis KL-052 from 4.26 to 7.85?U/mL. The OFAT approach was used to study the effects of supplementation of carbon, nitrogen and physical conditions, which included temperature, pH and agitation rate on extracellular RNase production by B. safensis KL-052. Five variables screened by Central Composite Design (CCD) were employed to evaluate their interactive effects on RNase production by the organism. CCD selected 2⁵ factorial values obtained by the statistical approach were peptone 1.13% (w/v), sodium nitrate 1.13% (w/v), MgSO₄ 0.06% (w/v), pH 8.5, and temperature 35?°C for RNase production by B. safensis. The highest predicted value of RNase was 7.05?U/ml while actual obtained value was 7.85?U/ml that was ～84% and 1.84-fold higher than OFAT approach.     

Green synthesis of enantiopure (S)‐1‐(benzofuran‐2‐yl)ethanol by whole‐cell biocatalyst

Optically active aromatic alcohols are valuable chiral building blocks of many natural products and chiral drugs. Lactobacillus paracasei BD87E6, which was isolated from a cereal‐based fermented beverage, was shown as a biocatalyst for the bioreduction of 1‐(benzofuran‐2‐yl) ethanone to (S)‐1‐(benzofuran‐2‐yl) ethanol with highly stereoselectivity. The bioreduction conditions were optimized using L. paracasei BD87E6 to obtain high enantiomeric excess (ee) and conversion. After optimization of the bioreduction conditions, it was shown that the bioreduction of 1‐(benzofuran‐2‐yl)ethanone was performed in mild reaction conditions. The asymmetric bioreduction of the 1‐(benzofuran‐2‐yl)ethanone had reached 92% yield with ee of higher than 99.9% at 6.73 g of substrate. Our study gave the first example for enantiopure production of (S)‐1‐(benzofuran‐2‐yl)ethanol by a biological green method. This process is also scalable and has potential in application. In this study, a basic and novel whole‐cell mediated biocatalytic method was performed for the enantiopure production of (S)‐1‐(benzofuran‐2‐yl)ethanol in the aqueous medium, which empowered the synthesis of a precious chiral intermediary process to be converted into a sophisticated molecule for drug production.     

Optimization of the fermentation parameters for the production of Ganoderma lucidum immunomodulatory protein by Pichia pastoris

Abstract

In order to obtain a better fermentation parameter for the production of recombinant Ganoderma lucidum immunomodulatory protein (rFIP-glu), an engineered Pichia pastoris GS115 was investigated on the fermentation time, temperature, methanol concentration and initial pH of media, while immunomodulatory activities of the rFIP-glu was confirmed. L₉(3³) orthogonal experiment were firstly employed to optimize various fermentation parameters in the shake-flask level. The optimized fermentation parameters were subsequently verified in a 5?L fermenter. Biological activities including cell viability and tumor necrosis factor-alpha (TNF-α) mRNA of the rFIP-glu were evaluated on murine macrophage RAW264.7 cells. The results showed that the yield of rFIP-glu was up to 368.71?μg/ml in the shake-flask, and 613.47?μg/ml in the 5?L fermenter, when the Pichia pastoris was incubated in basic media with the methanol concentration 1.0% and initial pH 6.5, and with constant shaking at 280?rpm for 4?days at 26?°C. In vitro assays of biological activity indicated that rFIP-glu had significant toxicity against RAW264.7 cells, and possessed the ability to induce TNF-α mRNA expression in macrophage RAW264.7 cells. In conclusion, engineered P. pastoris showed a good fermentation property under the optimum fermentation parameters. It could be a candidate industrial strain for further study.     

Biodegradation of 4-chlorophenol by <Emphasis Type="Italic">Arthrobacter chlorophenolicus A6</Emphasis>: effect of culture conditions and degradation kinetics

Among known microbial species, Arthrobacter chlorophenolicus A6 has shown very good potential to treat phenolic wastewaters. In this study, the levels of various culture conditions, namely initial pH, agitation (rpm), temperature (°C), and inoculum age (h) were optimized to enhance 4-chlorophenol (4-CP) biodegradation and the culture specific growth rate. For optimization, central composite design of experiments followed by response surface methodology (RSM) was applied. Results showed that among the four independent variables, i.e., pH, agitation (rpm), temperature (°C), and inoculum age (h) investigated in this study, interaction effect between agitation and inoculum age as well as that between agitation and temperature were significant on both 4-CP biodegradation efficiency and culture specific growth rate. Also, at the RSM optimized settings of 7.5 pH, 207 rpm, 29.6°C and 39.5 h inoculum age, 100% biodegradation of 4-CP at a high initial concentration of 300 mg l⁻¹ was achieved within a short span of 18.5 h of culture. The enhancement in the 4-CP biodegradation efficiency was found to be 23% higher than that obtained at the unoptimized settings of the culture conditions. Results of batch growth kinetics of A. chlorophenolicus A6 for various 4-CP initial concentrations revealed that the culture followed substrate inhibition kinetics. Biokinetic constants involved in the process were estimated by fitting the experimental data to several models available from the literature.     

A Simple and Green Procedure for the Microbial Effective Synthesis of 1-phenylethyl Alcohol in Both Enantiomeric Forms

Both R- and S-phenylethyl alcohol of high enantiomeric purity (98%) and with a satisfactory yield (40–80%) were obtained by bioreduction of acetophenone, catalyzed by whole cells of baker’s yeast. Revisions requested 29 November 2005; Revisions received 9 January 2006     

Enrichment of laccase production by Phoma herbarum isolate KU4 under solid-state fermentation by optimizing RSM coefficients using genetic algorithm

The process parameters were optimized to obtain enhanced enzyme activity from the fungus Phoma herbarum isolate KU4 using rice straw and saw dust as substrate under solid-state fermentation using Response surface methodology (RSM). Genetic algorithm was used to validate the RSM for maximum laccase production. Six variables, viz., pH of the media, initial moisture content, copper sulphate concentration, concentration of tannic acid, inoculum concentration and incubation time were found to be effective and optimized for enhanced production. Maximum laccase production was achieved by RSM at pH 5·0 and 86% of initial moisture content of the culture medium, 150 µmol l⁻¹ of CuSO₄, 1·5% tannic acid and 0·128 g inoculum g⁻¹ dry substrate inoculum size on the fourth day of fermentation. The highest laccase activity was observed as 79 008 U g⁻¹, which is approximately sixfold enhanced production compared to the unoptimized condition (12 085·26 U g⁻¹).     

Production of enantiomerically pure (S)-phenyl(pyridin-2-yl)methanol with Lactobacillus paracasei BD101

Abstract

Asymmetric reduction studies of heteroaryl ketones, including phenyl(pyridin-2-yl)methanone in enantioselective form with biocatalysts are very few, and chiral heteroaryl alcohols have been synthesized generally in the small scale. In this study, seven bacterial strains have been used to produce the (S)-phenyl(pyridin-2-yl)methanol in high enantiomeric excess and yield. Among the tested strains, Lactobacillus paracasei BD101, was found to be the best biocatalyst for the reducing phenyl(pyridin-2-yl)methanone to the (S)-phenyl(pyridin-2-yl)methanol at gram scale. The asymmetric bioreduction conditions were systematically optimized using L. paracasei BD101, which demonstrated excellent enantioselectivity and high level of conversion for the bioreduction reaction. (S)-phenyl(pyridin-2-yl)methanol, which is an analgesic, was produced enantiomerically pure form in the first time on gram scale using a biocatalyst. In total, 5.857?g of (S)-phenyl(pyridin-2-yl)methanol in enantiomerically pure form (>99% enantiomeric excess) was obtained in 52?h with 93% yield using whole cells of L. paracasei BD101. Enantiomerically pure (S)-phenyl (pyridin-2-yl)methanol, which is an analgesic, was first produced in the gram scale using a biocatalyst with excellent ee (>99%) and yield (93%).     

Synthesis of Enantiomerically Enriched Drug Precursors by Lactobacillus paracasei BD87E6 as a Biocatalyst

Global sales of single enantiomeric drug products are growing at an alarming rate every year. A total of 7 bacterial strains were screened for their ability to reduce acetophenones to its corresponding alcohol. Among these strains Lactobacillus paracasei BD87E6 was found to be the most successful biocatalyst to reduce the ketones to the corresponding alcohols. The reaction conditions were systematically optimized for the reducing agent Lactobacillus paracasei BD87E6, which showed high enantioselectivity and conversion for the bioreduction. The preparative scale asymmetric reduction of 3‐methoxyacetophenone ( 1h ) by Lactobacillus paracasei BD87E6 gave (R)‐1‐(3‐methoxyphenyl)ethanol ( 2h ) with 92% yield and 99% enantiomeric excess. Compound 2h could be used for the synthesis of (S)‐rivastigmine which has a great potential for the treatment of Alzheimer's disease. This study demonstrates that Lactobacillus paracasei BD87E6 can be used as a biocatalyst to obtain chiral carbinol with excellent yield and selectivity. The whole cell catalyzed the reductions of ketone substrates on the preparative scale, demonstrating that Lactobacillus paracasei BD87E6 would be a valuable biocatalyst for the preparation of chiral aromatic alcohols of pharmaceutical interest.     

Response surface methodology for the extraction of wedelolactone from Eclipta alba using aqueous two-phase extraction

Abstract

Aqueous two-phase extraction of wedelolactone from Eclipta alba was studied using the polymer-salt system. The system consisted of polyethylene glycol (PEG) as a top phase (polymer) and sodium citrate as a bottom phase (salt). Process parameters such as PEG concentration, PEG molecular weight, salt concentration, and pH have been optimized using response surface methodology (RSM) with the help of central composite design (CCD). The optimized conditions for aqueous two-phase system (ATPS), in the case of one factor at a time approach, were found as PEG 6000, PEG concentration 18% (w/v), salt concentration 16% (w/v), and pH 7; with maximum extraction yield of 6.52?mg/g. While, RSM studies showed maximum extraction yield of 6.73?mg/g with the optimized parameters as PEG 6000, PEG concentration 18% (w/v), salt concentration 17.96% (w/v), and pH 7. ATPS was found to give a 1.3 fold increase in the extraction yield of wedelolactone as compared to other conventional extraction methods.     

Bio-catalytic asymmetric synthesis of β-adrenergic receptor blocker precursor: (R)-2-bromo-1-(naphthalen-2-yl)ethanol

Abstract

Aromatic α-halohydrins, particularly 2-haloethanols as significant precursor of drugs, can easily be converted to chiral β-adrenergic receptor blockers. Eight strains of Lactobacillus curvatus were tested as biocatalysts for asymmetric reduction of 2-bromo-1-(naphthalen-2-yl)ethanone 1 to 2-bromo-1- (naphthalen-2-yl) ethanol 2. The parameters of the bioreduction were optimized using L. curvatus N4, the best biocatalyst found. As a result, (R)-2-bromo-1-(naphthalen-2-yl)ethanol 2, which can be β-adrenergic receptor blocker precursor, was produced for the first time in high yield and enantiomerically pure form using biocatalysts. Moreover, the gram scale synthesis was performed and 7.54?g of (R)-2 was synthesized as enantiopure form (enantiomeric excess >99%) in 48?h. The important advantages of this process are that it produces of (R)-2 for the first time in enantiopure form, in excellent yield and under environmentally friendly and moderate reaction conditions. This system is of the potential to be applied at a commercial scale.     

Enantioselective reduction of aryl and hetero aryl methyl ketones using plant cell suspension cultures of Vigna radiata

Vigna radiata was investigated as whole cell catalyst for the bioreduction of aryl and heteroaryl prochiral ketones into optically active alcohols. The study indicates selective bioreduction of different substituted aryl and heteroaryl ketones (1a–12a) to their respective (S) – chiral alcohols (1b–12b) in good to high enantioselectivity (77.7–97.5%) with very good yields (73–82%). The results obtained confirm that the keto reductase has broad substrate specificity and selectivity in catalyzing both six and five-membered heteroaryl methyl ketones. The current methodology substantiates a promising and alternative green approach for the synthesis of secondary chiral alcohols of biological importance in a mild, cheap and environmentally benign process.     

Production of influenza H1N1 vaccine from MDCK cells using a novel disposable packed-bed bioreactor

A process for human influenza H1N1 virus vaccine production from Madin–Darby canine kidney (MDCK) cells using a novel packed-bed bioreactor is described in this report. The mini-bioreactor was used to study the relationship between cell density and glucose consumption rate and to optimize the infection parameters of the influenza H1N1 virus (A/New Caledonia/20/99). The MDCK cell culture and virus infection were then monitored in a disposable perfusion bioreactor (AmProtein Current Perfusion Bioreactor) with proportional–integral–derivative control of pH, dissolved O₂ (DO), agitation, and temperature. During 6 days of culture, the total cell number increased from 2.0?×?10⁹ to 3.2?×?10¹⁰ cells. The maximum virus titers of 768 hemagglutinin units/100 μL and 7.8?×?10⁷ 50 % tissue culture infectious doses/mL were obtained 3 days after infection. These results demonstrate that using a disposable perfusion bioreactor for large-scale cultivation of MDCK cells, which allows for the control of DO, pH, and other conditions, is a convenient and stable platform for industrial-scale production of influenza vaccines.     

Kinetics of acetophenone reduction to (R)-1-phenylethanol by a whole-cell Pichia capsulata biocatalyst

(R)-1-phenylethanol is an important substance in fragrance and flavor industry. In this work, the reduction of acetophenone to (R)-1-phenylethanol in an aqueous medium was examined using Pichia capsulata as a whole-cell biocatalyst. Progress curve and initial rate measurements were used to obtain kinetic data. The experiments were carried out at pH 5, temperature of 25?°C, and in the presence of glucose to maintain in vivo regeneration of NADH. A model of the reversible reaction kinetics considering the substrate inhibition of the forward reaction was developed. Five kinetic parameters of this model were determined by a simultaneous fit of a reaction rate dependence on substrate concentration and 18 substrate and product concentration progress curves with very good accuracy. Equilibrium constant of the reaction and equilibrium conversion of acetophenone to (R)-1-phenylethanol were 13.7 and 93%, respectively.     

Asymmetric biocatalytic reduction of 3,5-bis(trifluoromethyl) acetophenone to (<Emphasis Type="Italic">1R</Emphasis>)-[3,5-bis(trifluoromethyl)phenyl] ethanol using whole cells of newly isolated <Emphasis Type="Italic">Leifsonia xyli</Emphasis> HS0904

A novel bacterial strain HS0904 was isolated from a soil sample using 3,5-bis(trifluoromethyl) acetophenone as the sole carbon source. This bacterial isolate can asymmetrically reduce 3,5-bis(trifluoromethyl) acetophenone to (1R)-[3,5-bis(trifluoromethyl)phenyl] ethanol with high enantiometric excess (ee) value. Based on its morphological, physiological characteristics, Biolog, 16S rDNA sequence and phylogenetic analysis, strain HS0904 was identified as Leifsonia xyli HS0904. To our knowledge, this is the first reported case on the species L. xyli exhibited R-stereospecific carbonyl reductase and used for the preparation of chiral (1R)-[3,5-bis(trifluoromethyl)phenyl] ethanol. The optimization of parameters for microbial transformation of 3,5-bis(trifluoromethyl) acetophenone to (1R)-[3,5-bis(trifluoromethyl)phenyl] ethanol catalyzed by whole cells of L. xyli HS0904 was carried out by examining some key factors including buffer pH, reaction temperature, shaking speed, substrate concentration, and reaction time. The obtained optimized conditions for the bioreduction are as follows: buffer pH 8.0, 70 mM of 3,5-bis(trifluoromethyl) acetophenone, 100 g l⁻¹ of glucose as co-substrate, 200 g l⁻¹ of resting cells as biocatalyst, reaction for 30 h at 30 °C and 200 rpm. Under above conditions, 99.4% of product ee and best yield of 62% were obtained, respectively. The results indicated that isolate L. xyli HS0904 is a novel potential biocatalyst for the production of (1R)-[3,5-bis(trifluoromethyl)phenyl] ethanol.