Features of bacterial cellulose synthesis in a mutant generated by disruption of the diguanylate cyclase 1 gene of <Emphasis Type="Italic">Acetobacter xylinum</Emphasis> BPR 2001

The diguanylate cyclase 1 (DGC1) (dgc1) gene in Acetobacter xylinum BPR 2001—a bacterial cellulose (BC) producer—was cloned and sequenced, and a DGC1 gene-disrupted mutant, strain DD, was constructed. The production and structural characteristics of the BC formed by DD were compared with those of the parental strain BPR 2001. BC production by DD was almost the same as that by BPR 2001 in static cultivation and in shake flask cultivation. However, in a jar fermentor DD produced about 36% more BC than the parental strain. DD produced suspended particle materials that cannot aggregate owing to their random structural characteristics in static cultivation; more uniformly dispersed BC pellicles and smaller BC pellets are produced on average in a jar fermentor, as reflected by the higher BC production by DD than by the parental strain in a jar fermentor. Micrographs of BC produced by DD revealed that the width of cellulose ribbons assemblies decreased as a result of differences in the ultrastructure and mechanism of formation of BC between the two strains. These results reveal that disruption of the dgc1 gene, which catalyzes synthesis of c-di-GMP (an effector of BC synthase), is not fatal for BC synthesis, although it affects BC structure.     

Relationship between Sulfaguanidine Resistance and Increased Cellulose Production in Acetobacter xylinum BPR3001E

The mechanism of the increased cell growth and cellulose production of Acetobacter xylinum subsp. sucrofermentans BPR3001E, a sulfaguanidine (SG)-resistant mutant, was investigated. We found that adding p-aminobenzoic acid (PABA) to cultures of the parent strain, BPR2001, led to increased levels of intracellular adenosine-related purine compounds and increased cellulose production. Furthermore, adding ATP increased the cellulose production by permeabilized BPR2001 cells. On the other hand, the intracellular levels of PABA and adenosine-related purine compounds in BPR3001E cells were higher than those in BPR2001 cells. These results suggest that SG resistance increases enhance cellulose production through increased levels of intracellular high-energy compounds caused by increased PABA biosynthesis, reflecting the promoted supply of cellulose precursors.     

Molecular ordering of cellulose after extraction of polysaccharides from primary cell walls of Arabidopsis thaliana: a solid-state CP/MAS (13)C NMR study

Solid-state CP/MAS 13C NMR spectroscopy was used to determine the effects of three different sequential extraction procedures, used to remove non-cellulosic polysaccharides, on the molecular ordering of cellulose in a cell-wall preparation containing mostly primary cell walls obtained from the leaves of the model dicotyledon, Arabidopsis thaliana. The extractions were 50 mM trans-1,2-diaminocyclohexane N,N,N',N'-tetraacetic acid (CDTA) and 50 mM sodium carbonate (giving Residue 1); 50 mM CDTA, 50 mM sodium carbonate and 1 M KOH (giving Residue 2); and 50 mM CDTA, 50 mM sodium carbonate and 4 M KOH (giving Residue 3). The molecular ordering of cellulose in Residue 1 was similar to that in unextracted walls: the cellulose was almost all crystalline, with 43% of molecules contained in crystallite interiors and similar proportions of the triclinic (I(alpha)) and monoclinic (I(beta)) crystal forms. Residue 2 was partly decrystallized and the remaining crystallites were mostly in the I(beta) form. Residue 3 was a mixture of cellulose II, cellulose I and amorphous cellulose. The presence of signals at 100.0 and 102.3 ppm in the spectra of Residues 1 and 2, but not of unextracted cell walls, suggested that the extractions giving these residues caused some of the non-cellulosic polysaccharides, possibly xyloglucans and galactoglucomannans, to become relatively well ordered, for example through interactions with cellulose crystallite surfaces.     

A second cauliflower mosaic virus gene product influences the structure of the viral inclusion body

We have used electron microscopy of thin sections and experiments on isolated viroplasms to compare the properties of four strains of cauliflower mosaic virus (CaMV), three of which were partially or completely deleted in open reading frame (ORF) II. Our results confirm that this gene is required for aphid transmissibility and show that the product of ORF II influences the firmness with which virions are held within the viroplasm. Analysis of the proteins in the viroplasms showed that a mutant with a partial deletion in ORF II produced a protein smaller than the normal ORF product. This smaller protein was non-functional with respect both to aphid transmissibility and properties of the viroplasms.     

Characterization of pellicle inhibition in Gluconacetobacter xylinus 53582 by a small molecule, pellicin, identified by a chemical genetics screen

Pellicin ([2E]-3-phenyl-1-[2,3,4,5-tetrahydro-1,6-benzodioxocin-8-yl]prop-2-en-1-one) was identified in a chemical genetics screen of 10,000 small molecules for its ability to completely abolish pellicle production in Gluconacetobacter xylinus. Cells grown in the presence of pellicin grew 1.5 times faster than untreated cells. Interestingly, growth in pellicin also caused G. xylinus cells to elongate. Measurement of cellulose synthesis in vitro showed that cellulose synthase activity was not directly inhibited by pellicin. Rather, when cellulose synthase activity was measured in cells that were pre-treated with the compound, the rate of cellulose synthesis increased eight-fold over that observed for untreated cells. This phenomenon was also apparent in the rapid production of cellulose when cells grown in the presence of pellicin were washed and transferred to media lacking the inhibitor. The rate at which cellulose was produced could not be accounted for by growth of the organism. Pellicin was not detected when intracellular contents were analyzed. Furthermore, it was found that pellicin exerts its effect extracellularly by interfering with the crystallization of pre-cellulosic tactoidal aggregates. This interference of the crystallization process resulted in enhanced production of cellulose II as evidenced by the ratio of acid insoluble to acid soluble product in in vitro assays and confirmed in vivo by scanning electron microscopy and powder X-ray diffraction. The relative crystallinity index, RCI, of pellicle produced by untreated G. xylinus cultures was 70% while pellicin-grown cultures had RCI of 38%. Mercerized pellicle of untreated cells had RCI of 42%, which further confirms the mechanism of action of pellicin as an inhibitor of the cellulose I crystallization process. Pellicin is a useful tool for the study of cellulose biosynthesis in G. xylinus.     

Crystalline structure analysis of cellulose treated with sodium hydroxide and carbon dioxide by means of X-ray diffraction and FTIR spectroscopy

Crystalline structures of cellulose (named as Cell 1), NaOH-treated cellulose (Cell 2), and subsequent CO2-treated cellulose (Cell 2-C) were analyzed by wide-angle X-ray diffraction and FTIR spectroscopy. Transformation from cellulose I to cellulose II was observed by X-ray diffraction for Cell 2 treated with 15-20 wt% NaOH. Subsequent treatment with CO2 also transformed the Cell 2-C treated with 5-10 wt% NaOH. Many of the FTIR bands including 2901, 1431, 1282, 1236, 1202, 1165, 1032, and 897 cm(-1) were shifted to higher wave number (by 2-13 cm(-1)). However, the bands at 3352, 1373, and 983 cm(-1) were shifted to lower wave number (by 3-95 cm(-1)). In contrast to the bands at 1337, 1114, and 1058 cm(-1), the absorbances measured at 1263, 993, 897, and 668 cm(-1) were increased. The FTIR spectra of hydrogen-bonded OH stretching vibrations at around 3352 cm(-1) were resolved into three bands for cellulose I and four bands for cellulose II, assuming that all the vibration modes follow Gaussian distribution. The bands of 1 (3518 cm(-1)), 2 (3349 cm(-1)), and 3 (3195 cm(-1)) were related to the sum of valence vibration of an H-bonded OH group and an intramolecular hydrogen bond of 2-OH ...O-6, intramolecular hydrogen bond of 3-OH...O-5 and the intermolecular hydrogen bond of 6-O...HO-3', respectively. Compared with the bands of cellulose I, a new band of 4 (3115 cm(-1)) related to intermolecular hydrogen bond of 2-OH...O-2' and/or intermolecular hydrogen bond of 6-OH...O-2' in cellulose II appeared. The crystallinity index (CI) was obtained by X-ray diffraction [CI(XD)] and FTIR spectroscopy [CI(IR)]. Including absorbance ratios such as A1431,1419/A897,894 and A1263/A1202,1200, the CI(IR) was evaluated by the absorbance ratios using all the characteristic absorbances of cellulose. The CI(XD) was calculated by the method of Jayme and Knolle. In addition, X-ray diffraction curves, with and without amorphous halo correction, were resolved into portions of cellulose I and cellulose II lattice. From the ratio of the peak area, that is, peak area of cellulose I (or cellulose II)/total peak area, CI(XD) were divided into CI(XD-CI) for cellulose I and CI(XD-CII) for cellulose II. The correlation between CI(XD-CI) (or CI(XD-CII)) and CI(IR) was evaluated, and the bands at 2901 (2802), 1373 (1376), 897 (894), 1263, 668 cm(-1) were good for the internal standard (or denominator) of CI(IR), which increased the correlation coefficient. Both fraction of the absorbances showing peak shift were assigned as the alternate components of CI(IR). The crystallite size was decreased to constant value for Cell 2 treated at >or= 15 wt% NaOH. The crystallite size of Cell 2-C (cellulose II) was smaller than that of Cell 2 (cellulose I) treated at 5-10 wt% NaOH. But the crystallite size of Cell 2-C (cellulose II) was larger than that of Cell 2 (cellulose II) treated at 15-20 wt% NaOH.     

Direct dissolution of cellulose in NaOH/thiourea/urea aqueous solution

Untreated cellulose was directly and quickly dissolved in NaOH/thiourea/urea aqueous solution. The mechanism of dissolution was investigated by SEM, WXRD and (13)C NMR. The components of this solvent cannot dissolve cellulose on their own, and the interactions between NaOH and urea, as well as between NaOH and thiourea, play an important role in improving the dissolution of cellulose. Moreover, (13)C NMR spectra proved that NaOH, thiourea, and urea were bound to cellulose molecules, which brings cellulose molecules into aqueous solution to a certain extent and prevents cellulose macromolecules from associating. (13)C NMR spectra of the cellulose solution show that this novel mixture is a direct solvent. Optical microscopy and CP MAS (13)C NMR were used to study the process of dissolution. The results reveal that cellulose is dissolved completely and that cellulose I (cotton linter) first changes to amorphous cellulose chains in solution, and then to cellulose II during regeneration. Moreover, a new, more effective dissolution method is proposed, as confirmed by dynamic rheology measurements.     

Enhancement of crystallinity of cellulose produced by <Emphasis Type="Italic">Escherichia coli</Emphasis> through heterologous expression of <Emphasis Type="Italic">bcsD</Emphasis> gene from <Emphasis Type="Italic">Gluconacetobacter xylinus</Emphasis>

Objectives

To evaluate the crystallinity index of the cellulose produced by Escherichia coli Nissle 1917 after heterologous expression of the cellulose synthase subunit D (bcsD) gene of Gluconacetobacter xylinus BPR2001.

Results

The bcsD gene of G. xylinus BPR2001 was expressed in E. coli and its protein product was visualized using SDS-PAGE. FTIR analysis showed that the crystallinity index of the cellulose produced by the recombinants was 0.84, which is 17% more than that of the wild type strain. The increased crystallinity index was also confirmed by X-ray diffraction analysis. The cellulose content was not changed significantly after over-expressing the bcsD.

Conclusion

The bcsD gene can improve the crystalline structure of the bacterial cellulose but there is not any significant difference between the amounts of cellulose produced by the recombinant and wild type E. coli Nissle 1917.

     

Identification of a second cellulose synthase gene (acsAII) in Acetobacter xylinum.

A second cellulose synthase gene (acsAII) coding for a 175-kDa polypeptide that is similar in size and sequence to the acsAB gene product has been identified in Acetobacter xylinum AY201. Evidence for the presence of this gene was obtained during analysis of A. xylinum mutants in which the acsAB gene was disrupted (I.M. Saxena, K. Kudlicka, K. Okuda, and R.M. Brown, Jr., J. Bacteriol. 176:5735-5752, 1994). Although these mutants produced no detectable cellulose, they exhibited significant cellulose synthase activity in vitro. The acsAII gene was isolated by using an acsAB gene fragment as a probe. The acsAII gene coded for cellulose synthase activity as determined from sequence analysis and study of mutants in which this gene was disrupted. A mutant in which only the acsAII gene was disrupted showed no significant differences in either the in vivo cellulose production or the in vitro cellulose synthase activity compared with wild-type cells. Mutants in which both the acsAII and acsAB genes were disrupted produced no cellulose in vivo and exhibited negligible cellulose synthase activity in vitro, thus confirming that the cellulose synthase activity observed in the acsAB mutants was coded by the acsAII gene. These results establish the presence of an additional gene for cellulose synthase expressed in cells of A. xylinum, yet this gene is not required for cellulose production when cells are grown under laboratory conditions.     

Effects of acetan on production of bacterial cellulose by Acetobacter xylinum

Acetan is a water-soluble polysaccharide produced by a bacterial cellulose (BC) producer, Acetobacter xylinum. An acetan-nonproducing mutant, EP1, was generated from wild-type A. xylinum BPR2001 by the disruption of aceA, which may act to catalyze the first step of the acetan biosynthetic pathway in this bacterium. EP1 produced less BC than the wild-type strain. However, when EP1 was cultured in a medium containing acetan, BC production was stimulated and the final yield of BC was equivalent to that of BPR2001. The culture broth containing acetan was more viscous and the free cell number was higher than that of the broth without the polysaccharide, so acetan may hinder the coagulation of BC in the broth. The addition of 1.5 g/l agar also increased BC production; we concluded that acetan and BC syntheses were not directly related on the genetic level.     

Role of water-soluble polysaccharides in bacterial cellulose production

Acetobacter xylinum BPR2001 produces water-insoluble bacterial cellulose (BC) and a water-soluble polysaccharide called acetan in corn steep liquor-fructose medium. Acetobacter xylinum EP1, which is incapable of acetan production was derived by disrupting the aceA gene of BPR2001. The BC production by EP1 (2.88 g/L) was lower than that by BPR2001 (4.6 g/L) in baffled-flask culture. When purified acetan or agar was added to the medium from the start of cultivation, the BC production by EP1 was enhanced and the final BC yield of EP1 was almost the same as that of BPR2001. A similar improvement of BC production by EP1 by the addition of agar was also confirmed by cultivation in a 50-L airlift reactor. From these results, the role of acetan in BC production is associated with the increase in the viscosity of the culture medium which may hinder coagulation of BC and cells in the culture, thereby accelerating the growth of BPR2001 and BC production by BPR2001.     

Synthesis of 20α- and 20β-Amino-3,5-pregnadiene Derivatives and Antimicrobial Activity

Cellulose production by Acetobacter strains is enhanced by the addition of a small amount of cellulose to the production culture. The effect of an endo-β-1, 4-glucanase from Bacillus subtilis on the cellulose production by Acebohacter xylinum BPR2001 was examined by adding various amounts of the purified glucanase to the culture. The addition of a small amount of this glucanase enhanced cellulose production. Furthermore, it reduced the amount of a polysaccharide called acetan produced. However, an active-site mutant enzyme of the glucanase, which showed no enzyme activity but still had cellulose-binding ability, had no effect on cellulose production. It was concluded, therefore, that the endoglucanase activity itself, but not the cellulose-binding ability, was essential for the enhancement of cellulose production. The structural properties of the cellulose produced in the presence of the endoglucanase were found to be almost identical to those of native bacterial cellulose.     

Characterization of the Biosynthetic Pathway of Cellulose from Glucose and Fructose in Acetobacter xylinum

For characterization of the biosynthetic pathway of cellulose in a cellulose-producing Acetobacter xylinum strain BPR2001, the activities of several enzymes were measured. The activity of phosphoglucose isomerase catalyzing the conversion of fructose-6- phosphate into glucose-6-phosphate was greatly increased by fructose in the medium. The UDP-glucose pyrophosphorylase activity catalyzing the synthesis of UDP-glucose was very high in strain BPR2001, consistent with the idea that this is the key enzyme in cellulose biosynthesis. Strain BPR2001 was found to have a fructose-specific phosphoenolpyruvate-dependent phosphotransferase system (PTS).     

WAXS and 13C NMR study of Gluconoacetobacter xylinus cellulose in composites with tamarind xyloglucan

- Model composites, produced using cellulose from stationary cultures of the bacterium Gluconoacetobacter xylinus and tamarind xyloglucan, were examined by wide-angle X-ray scattering (WAXS) and CP/MAS solid-state (13)C NMR spectroscopy. The dominant crystallite allomorph of cellulose produced in culture media with or without xyloglucan was cellulose I(alpha) (triclinic). The presence of xyloglucan in the culture medium reduced the cross-section dimensions of the cellulose crystallites, but did not affect the crystallite allomorph. However, when the composites were refluxed in buffer, the proportion of cellulose I(beta) allomorph increased relative to that of cellulose I(alpha). In contrast, cellulose I(alpha) remained the dominant form when cellulose, produced in the absence of xyloglucan, was then heated in the buffer. Hence the presence of xyloglucan has a profound effect on the formation of the cellulose crystallites by G. xylinus.     

A Polymerase Chain Reaction Method for Identification of Five Major Meloidogyne Species

A polymerase chain reaction (PCR) method for discriminating Meloidogyne incognita, M. arenaria, M. javanica, M. hapla, and M. chitwoodi was developed. Single juveniles were ruptured in a drop of water and added directly to a PCR reaction mixture in a microcentrifuge tube. Primer annealing sites were located in the 3'' portion of the mitochondrial gene coding for cytochrome oxidase subunit II and in the 16S rRNA gene. Following PCR amplification, fragments of three sizes were detected. The M. incognita and M. javanica reactions produced a 1.7-kb fragment; the M. arenaria reaction, a 1.1-kb fragment; and the M. hapla and M. chitwoodi reactions resulted in a 0.52-kb fragment. Digestion of the amplified product with restriction endonucleases allowed discrimination among species with identically sized amplification products. Dra I digestions of the 0.52-kb amplification product produced a characteristic three-banded pattern in M. chitwoodi, versus a two-banded pattern in M. hapla. Hinf I digestion of the 1.7-kb fragment produced a two-banded pattern in M. javanica, versus a three-banded pattern in M. incognita. Amplification and digestion of DNA from juveniles from single isolates of M. marylandi, M. naasi, and M. nataliei indicated that the diagnostic application of this primer set may extend to less frequently encountered Meloidogyne species.     

Cytoplasmic ATPase involved in ferrous ion uptake from magnetotactic bacterium Magnetospirillum magneticum AMB-1

A non-magnetic mutant of Magnetospirillum magneticum AMB-1 (NMA61), harboring a defective gene located in ORF4 (gene ID: amb4111) was generated by transposon mutagenesis. Biochemical characterization of the gene product of ORF4 revealed that it was localized in the cytoplasm and displayed ATPase activity. The ability of NMA61 to take up iron was severely compromised. Ferrous ion concentration in the medium decreased more with the wild-type than with NMA61, while the iron content in the cytoplasmic fraction of NMA61 was much lower than the wild-type strain. This cytoplasmic ATPase is essential for iron trafficking within M. magneticum AMB-1.     

Investigation of the spinnability of cellulose/alkaline ferric tartrate solutions

Dynamic rheology, UV/VIS spectrometry with temperature programming cuvette and reaction calorimetry were conducted on cellulose pulp/FeTNa (NaOH solution containing ferric tartaric acid complex) solutions to investigate their thermostability and spinnability. Color of cellulose/FeTNa solutions changed above 90 °C due to the decomposition of the complex. Thermal activity of cellulose/FeTNa solution started above 130 °C induced by water vapor evolution and complex decomposition. Regeneration of cellulose/FeTNa solutions in a non-solvent (acetic acid and Na-gluconate mixture) resulted in transition from cellulose I into cellulose II structure as revealed by WAXS measurements. Wet-spinning attempts of cellulose/FeTNa solutions yielded fiber-like shaped bodies with a brittle structure.     

Identification of the region of AT2 receptor needed for inhibition of the AT1 receptor-mediated inositol 1,4,5-triphosphate generation

Increase in the intracellular inositol triphosphate (IP3) levels in Xenopus oocytes in response to expression and activation of rat angiotensin II (Ang II) receptor AT1 was inhibited by co-expression of rat AT2 receptor. To identify which region of the AT2 was involved in this inhibition, ability of three AT2 mutants to abolish this inhibition was analyzed. Deletion of the C-terminus of the AT2 did not abolish this inhibition. Replacing Ile249 in the third intracellular loop (3rd ICL) of the AT2 with proline, corresponding amino acid in the AT1, in the mutant M6, resulted in slightly reduced affinity to [125I]Ang II (K(d)=0.259 nM), however, did not abolish the inhibition. In contrast, replacing eight more amino acids in the 3rd ICL of the AT2 (at positions 241-244, 250-251 and 255-256) with that of the AT1 in the mutant M8, not only increased the affinity of the AT2 receptor to [125I]Ang II (K(d)=0.038 nM) but also abolished AT2-mediated inhibition. Interestingly, activation of the M8 by Ang II binding also resulted in increase in the intracellular IP(3) levels in oocytes. These results imply that the region of the 3rd ICL of AT2 spanning amino acids 241-256 is sufficient for the AT2-mediated inhibition of AT1-stimulated IP3 generation. Moreover, these nine mutations are also sufficient to render the AT2 with the ability to activate phospholipase C.     

Cloning and expression of the Erwinia carotovora subsp. carotovora gene encoding the low-molecular-weight bacteriocin carocin S1

The purpose of this study was to clone the carocin S1 gene and express it in a non-carocin-producing strain of Erwinia carotovora. A mutant, TH22-10, which produced a high-molecular-weight bacteriocin but not a low-molecular-weight bacteriocin, was obtained by Tn5 insertional mutagenesis using H-rif-8-2 (a spontaneous rifampin-resistant mutant of Erwinia carotovora subsp. carotovora 89-H-4). Using thermal asymmetric interlaced PCR, the DNA sequence from the Tn5 insertion site and the DNA sequence of the contiguous 2,280-bp region were determined. Two complete open reading frames (ORF), designated ORF2 and ORF3, were identified within the sequence fragment. ORF2 and ORF3 were identified with the carocin S1 genes, caroS1K (ORF2) and caroS1I (ORF3), which, respectively, encode a killing protein (CaroS1K) and an immunity protein (CaroS1I). These genes were homologous to the pyocin S3 gene and the pyocin AP41 gene. Carocin S1 was expressed in E. carotovora subsp. carotovora Ea1068 and replicated in TH22-10 but could not be expressed in Escherichia coli (JM101) because a consensus sequence resembling an SOS box was absent. A putative sequence similar to the consensus sequence for the E. coli cyclic AMP receptor protein binding site (-312 bp) was found upstream of the start codon. Production of this bacteriocin was also induced by glucose and lactose. The homology search results indicated that the carocin S1 gene (between bp 1078 and bp 1704) was homologous to the pyocin S3 and pyocin AP41 genes in Pseudomonas aeruginosa. These genes encode proteins with nuclease activity (domain 4). This study found that carocin S1 also has nuclease activity.