Dye-sensitized solar cells based on PEDOP as a hole conductive medium

Dye-sensitized photo-electrochemical cells based on a solid poly-(3,4-(ethylenedioxy)pyrrole) (PEDOP) electron mediating matrix were assembled and photo-electrochemically characterized. The conductive polymer was directly grown on the sensitized TiO₂ surface exploiting a photo-assisted electropolymerization promoted by a properly designed ruthenium dye bearing pyrrole functionalities. J-V characteristics and photoaction spectra indicated very low efficiencies mainly determined by an efficient recombination of photo-injected electrons with both PEDOP acceptor states and oxidized sensitizers.     

Dye-sensitized photocurrents and adsorption properties of merocyanine dye at atomically flat rutile (1 1 0) and (1 0 0) TiO2 surfaces

The crystal-face dependence of the dye-sensitized photocurrents and the adsorption properties of benzothiazole merocyanine (Mc[18,1]) dye molecules were investigated, using atomically flat (1 0 0) and (1 1 0) TiO₂ single crystal surfaces. From the estimation of the amount of the transferred charge from the TiO₂ surface to CO groups of dye molecules based on NEXAFS data, it was revealed that the interaction of the adsorbed molecules and the (1 1 0) surface was much stronger than that for the (1 0 0) surface. On the other hand, the absorbed photon to current conversion efficiency (APCE) value was almost the same for both surfaces. We suggested a possible explanation as follows: the energy difference between the LUMO of Mc[18,1] and the conduction band of TiO₂ was large enough to give a nearly 100% quantum efficiency of electron transfer from photoexcited dye to TiO₂, which made the difference in the interaction between dye molecules and TiO₂ not apparent. The incident photon to current conversion efficiency (IPCE) for the (1 0 0) surface was much larger than that for the (1 1 0) surface, which was explained by the fact that the amount of the adsorbed dye molecules on the (1 0 0) surface was larger than on the (1 1 0) surface, probably due to the larger surface density of five-coordinated Ti sites in the former surface.     

Mesoporous TiO2 Beads Offer Improved Mass Transport for Cobalt‐Based Redox Couples Leading to High Efficiency Dye‐Sensitized Solar Cells

Overcoming ionic diffusion limitations is essential for the development of high‐efficiency dye‐sensitized solar cells based on cobalt redox mediators. Here, improved mass transport is reported for photoanodes composed of mesoporous TiO₂ beads of varying pore sizes and porosities in combination with the high extinction YD2‐o‐C8 porphyrin dye. Compared to a photoanode made of 20 nm‐sized TiO₂ particles, electrolyte diffusion through these films is greatly improved due to the large interstitial pores between the TiO₂ beads, resulting in up to 70% increase in diffusion‐limited current. Simultaneously, transient photocurrent measurements reveal no mass transport limitations for films of up to 10 μm thickness. In contrast, standard photoanodes made of 20 nm‐sized TiO₂ particles show non‐linear behavior in photocurrent under 1 sun illumination for a film thickness as low as 7 μm. By including a transparent thin mesoporous TiO₂ underlayer in order to reduce optical losses at the fluorine‐doped tin oxide (FTO)‐TiO₂ interface, an efficiency of 11.4% under AM1.5G 1 sun illumination is achieved. The combination of high surface area, strong scattering behavior, and high porosity makes these mesoporous TiO₂ beads particularly suitable for dye‐sensitized solar cells using bulky redox couples and/or viscous electrolytes.     

Redox tuning of the catalytic activity of soluble fumarate reductases from Shewanella

Many enzymes involved in bioenergetic processes contain chains of redox centers that link the protein surface, where interaction with electron donors or acceptors occurs, to a secluded catalytic site. In numerous cases these redox centers can transfer only single electrons even when they are associated to catalytic sites that perform two-electron chemistry. These chains provide no obvious contribution to enhance chemiosmotic energy conservation, and often have more redox centers than those necessary to hold sufficient electrons to sustain one catalytic turnover of the enzyme. To investigate the role of such a redox chain we analyzed the transient kinetics of fumarate reduction by two flavocytochromes c₃ of Shewanella species while these enzymes were being reduced by sodium dithionite. These soluble monomeric proteins contain a chain of four hemes that interact with a flavin adenine dinucleotide (FAD) catalytic center that performs the obligatory two electron–two proton reduction of fumarate to succinate. Our results enabled us to parse the kinetic contribution of each heme towards electron uptake and conduction to the catalytic center, and to determine that the rate of fumarate reduction is modulated by the redox stage of the enzyme, which is defined by the number of reduced centers. In both enzymes the catalytically most competent redox stages are those least prevalent in a quasi-stationary condition of turnover. Furthermore, the electron distribution among the redox centers during turnover suggested how these enzymes can play a role in the switch between respiration of solid and soluble terminal electron acceptors in the anaerobic bioenergetic metabolism of Shewanella.     

Deposition of iron titanate/titania ceramic composite thin films from a single molecular precursor

A heterobimetallic single molecular precursor, [Fe₂Ti₄(μ-O)₆(TFA)₈(THF)₆] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized by the simple reaction of [Fe₃O(OAc)₆(H₂O)₃]NO₃·4H₂O [OAc = acetato] with tetrakis(2-ethoxyethanalato)titanium(IV) in the presence of trifluoroacetic acid in THF. The synthesized precursor was analyzed by melting point, CHN analysis, FTIR, single crystal X-ray diffraction and thermogravimetric analysis. Complex (1) crystallizes in the orthorhombic space group Pca2₁ with cell dimensions a = 19.2114(14), b = 20.4804(15) and c = 17.2504(12) Å, and the complex undergoes thermal decomposition at 490 °C to give a residual mass corresponding to an Fe₂TiO₅-TiO₂ composite mixture. The synthesized precursor was utilized for deposition of Fe₂TiO₅-TiO₂ composite thin films by aerosol-assisted chemical vapor deposition (AACVD) on glass substrates at 500 °C using argon as the carrier gas. Scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and X-ray powder diffraction (XRD) analyses of the thin films suggest the formation of good quality crystalline thin films of an Fe₂TiO₅-TiO₂ composite with an average grain size of 0.105-0.120 μm.     

Atomic‐Layer‐Deposited Aluminum and Zirconium Oxides for Surface Passivation of TiO2 in High‐Efficiency Organic Photovoltaics

The reduction in electronic recombination losses by the passivation of surfaces is a key factor enabling high‐efficiency solar cells. Here a strategy to passivate surface trap states of TiO₂ films used as cathode interlayers in organic photovoltaics (OPVs) through applying alumina (Al₂O₃) or zirconia (ZrO₂) insulating nanolayers by thermal atomic layer deposition (ALD) is investigated. The results suggest that the surface traps in TiO₂ are oxygen vacancies, which cause undesirable recombination and high electron extraction barrier, reducing the open‐circuit voltage and the short‐circuit current of the complete OPV device. It is found that the ALD metal oxides enable excellent passivation of the TiO₂ surface followed by a downward shift of the conduction band minimum. OPV devices based on different photoactive layers and using the passivated TiO₂ electron extraction layers exhibit a significant enhancement of more than 30% in their power conversion efficiencies compared to their reference devices without the insulating metal oxide nanolayers. This is a result of significant suppression of charge recombination and enhanced electron extraction rates at the TiO₂/ALD metal oxide/organic interface.     

TiO2 Nanocrystals Synthesized by Laser Pyrolysis for the Up‐Scaling of Efficient Solid‐State Dye‐Sensitized Solar Cells

A crucial issue regarding emerging nanotechnologies remains the up‐scaling of new functional nanostructured materials towards their implementation in high performance applications on a large scale. In this context, we demonstrate high efficiency solid‐state dye‐sensitized solar cells prepared from new porous TiO₂ photoanodes based on laser pyrolysis nanocrystals. This strategy exploits a reduced number of processing steps as well as non‐toxic chemical compounds to demonstrate highly porous TiO₂ films. The possibility to easily tune the TiO₂ nanocrystal physical properties allows us to demonstrate all solid‐state dye‐sensitized devices based on a commercial benchmark materials (organic indoline dye and molecular hole transporter) presenting state‐of‐the‐art performance comparable with reference devices based on a commercial TiO₂ paste. In particular, a drastic improvement in pore infiltration, which is found to balance a relatively lower surface area compared to the reference electrode, is evidenced using laser‐synthesized nanocrystals resulting in an improved short‐circuit current density under full sunlight. Transient photovoltage decay measurements suggest that charge recombination kinetics still limit device performance. However, the proposed strategy emphasizes the potentialities of the laser pyrolysis technique for up‐scaling nanoporous TiO₂ electrodes for various applications, especially for solar energy conversion.     

Triblock‐Terpolymer‐Directed Self‐Assembly of Mesoporous TiO2: High‐Performance Photoanodes for Solid‐State Dye‐Sensitized Solar Cells

A new self‐assembly platform for the fast and straightforward synthesis of bicontinuous, mesoporous TiO₂ films is presented, based on the triblock terpolymer poly(isoprene ‐ b ‐ styrene ‐ b ‐ ethylene oxide). This new materials route allows the co‐assembly of the metal oxide as a fully interconnected minority phase, which results in a highly porous photoanode with strong advantages over the state‐of‐the‐art nanoparticle‐based photoanodes employed in solid‐state dye‐sensitized solar cells. Devices fabricated through this triblock terpolymer route exhibit a high availability of sub‐bandgap states distributed in a narrow and low enough energy band, which maximizes photoinduced charge generation from a state‐of‐the‐art organic dye, C220. As a consequence, the co‐assembled mesoporous metal oxide system outperformed the conventional nanoparticle‐based electrodes fabricated and tested under the same conditions, exhibiting solar power‐conversion efficiencies of over 5%.     

Towards Long‐Term Photostability of Solid‐State Dye Sensitized Solar Cells

The solid‐state dye‐sensitized solar cell (DSSC) was introduced to overcome inherent manufacturing and instability issues of the electrolyte‐based DSSC and progress has been made to deliver high photovoltaic efficiencies at low cost. However, despite 15 years research and development, there still remains no clear demonstration of long‐term stability. Here, solid‐state DSSCs are subjected to the severe aging conditions of continuous illumination at an elevated temperature. A fast deterioration in performance is observed for devices encapsulated in the absence of oxygen. The photovoltaic performance recovers when re‐exposed to air. This reversible behavior is attributed to three related processes: i) the creation of light and oxygen sensitive electronic shunting paths between TiO₂ and the top metal electrode, ii) increased recombination at the TiO₂/organic interface, and iii) the creation of deep electron traps that reduce the photocurrent. The device deterioration is remedied by the formation of an insulating alumino‐silicate shell around the TiO₂ nanocrystals, which reduces interfacial recombination, and the introduction of an insulating mesoporous SiO₂ buffer layer between the top electrode and TiO₂, which acts as a permanent insulating barrier between the TiO₂ and the metal electrode, preventing shunting.     

Interfacial electron transfer on TiO2 sensitized with an axially anchored trans tetradentate Ru(II) compound

The ruthenium complexes, trans-[Ru(phen-NH-phen)(eina)₂](PF₆)₂ and trans-[Ru(phen-NH-phen)(ina)₂](PF₆)₂ where phen-NH-phen = N,N-bis(1,10-phenanthroline-2-yl)amine, ina = isonicotinic acid and eina = ethyl isonicotinate, have been synthesized and characterized by ¹H NMR, elemental analysis, and IR spectroscopy. The compounds were non-emissive at room temperature, but displayed intense photoluminescence in 4:1 ethanol/methanol glasses at 77 K with corrected emission maximum at 570-580 nm. A quasi-reversible wave observed in cyclic voltammetry experiments was assigned to the Ru^III/II couple, E° (trans-[Ru(phen-NH-phen)(eina)₂)^3+/2+ = +1.22 V versus Ag/AgCl. The trans-[Ru(phen-NH-phen)(ina)₂](PF₆)₂ compound was found to bind to nanocrystalline TiO₂ thin films from acetonitrile solution. Pulsed 532 nm excitation of trans-[Ru(phen-NH-phen)(ina)₂](PF₆)₂ anchored to mesoporous nanocrystalline TiO₂ thin films resulted in an absorption difference spectra consistent with the formation of an interfacial charge separated state trans-[Ru^III (phen-NH-phen)(ina)₂]⁺/TiO₂ (e⁻). The formation of this state could not be time resolved, consistent with rapid excited state injection into the TiO₂, k_inj > 10⁸ s⁻¹. Comparative measurements with a thin film actinometer yielded an injection quantum yield (?_inj) of 0.8. Charge recombination required milliseconds for completion and followed a bi-second-order equal concentration kinetic model with k₁ = 1.0 × 10⁸ s⁻¹, and k₂ = 3.0 × 10⁵ s⁻¹. In regenerative solar cells with 0.5 M LiI and 0.005 M I₂ in acetonitrile, incident photon-to-current efficiencies were typically less than 10%.     

Improving Microstructured TiO2 Photoanodes for Dye Sensitized Solar Cells by Simple Surface Treatment

TiCl₄ surface treatment studies of porous electrode structure of TiO₂ aggregates synthesized using an acidic precursor and CTAB as a templating agent are carried out in order to understand and improve upon recombination kinetics in the photonanode film matrix, together with enhancing the intrinsic light scattering. The key beneficial features of the photoanode included high surface roughness, necessary for superior dye adsorption, nanocrystallite aggregates leading to diffuse light scattering within the film matrix, and a hierarchical macro‐ and mesopore structure allowing good access of electrolyte to the dye, thereby assisting in dye regeneration (enhanced charge transfer). Pre‐treatment of the TiO₂ electrodes reduced recombination at the fluorine‐doped tin oxide (FTO)/electrolyte interface. The post‐treatment study showed enhanced surface roughness through the deposition of a thin overlayer of amorphous TiO₂ on the film structure. This led to a notable improvement in both dye adsorption and inherent light scattering effects by the TiO₂ aggregates, resulting in enhanced energy harvesting. The thin TiO₂ overlayer also acted as a barrier in a core‐shell configuration within the porous TiO₂ matrix, and thereby reduced recombination. This allowed the hierarchical macro‐ and mesoporosity of the film matrix to be utilized more effectively for enhanced charge transfer during dye regeneration. Post‐treatment of the aggregated TiO₂ matrix resulted in a 36% enhancement in power conversion efficiency from 4.41% of untreated cells to 6.01%.     

Key aspects of individual layers in solid-state dye-sensitized solar cells and novel concepts to improve their performance

In this feature article, we discuss the key aspects of solid-state dye-sensitized solar cells (SDSC) and propose different concepts based on extensive studies carried out in our group to improve their performance. The influence of compact TiO₂ layer, novel donor-antenna sensitizing dyes, nature of nanocrystalline-TiO₂ layers and solid-state organic hole conductors on the performance of SDSC is discussed in this article. Both preparation and thickness of the compact TiO₂ layer were optimized using spray pyrolysis. The studies revealed that an optimum film thickness of 120-150 nm of compact TiO₂ yielded the best rectifying behavior and SDSC performance. The influence of three different mesoporous titania films, obtained from three different titania nanocrystals, prepared by sol-gel, thermal, and colloidal-microwave process, was also studied and discussed here. The TiO₂ layer with the optimum pore volume and pore diameter (∼44 nm) displayed the highest efficiency and IPCE in SDSC. The importance of pore size rather than high surface area for filling the mesoporous layer with solid-state hole conductor became evident from this study. A series of heteroleptic Ru(II) complexes carrying donor antenna moieties, namely, triphenylamine (TPA) or N,N′-bis(phenyl)-N,N′-bis(3-methylphenyl)-1,1′-biphenyl-4,4′-diamine (TPD), were synthesized and applied in SDSC. These novel donor-antenna dyes revealed spectacular performances of power conversion efficiencies in the range 1.5-3.4%, as measured under AM 1.5 spectral conditions. This was attributed to highly efficient light harvesting of these novel dyes and the improved charge-transfer dynamics at TiO₂-dye and dye-hole conductor interfaces. Different low molecular weight and polymeric triphenyldiamines were synthesized and utilized as hole-transporting layers (HTL) in SDSC. Different studies showed that low molecular TPDs displayed better efficiency than polymeric counterparts due to their improved filling into the pores of nc-TiO₂ layer. Another interesting study revealed that an optimum driving force in terms of HOMO-level difference between the dye and HTL decides charge carrier generation efficiency. Recently, novel hole conductors with spiro-bifluorene-triphenylamine core for transporting holes and tetraethylene glycol side chains for binding lithium ions were synthesized and applied in SDSC. This work clearly emphasizes that Li⁺-salt is required at the TiO₂/dye interface as well as in the bulk of HTL. It was also found that the addition of about 5-20% of these Li⁺-binding hole conductors and higher Li-salt (N-lithiotrifluoromethane sulfonamide) concentrations improved the SDSC performance. An improvement of about 120% in the solar cell efficiency as compared to the reference cells was achieved with an optimum composition of Li⁺-binding hole conductor and Li-salt.     

Solution‐Processed TiO2 Nanoparticles as the Window Layer for CuIn(S,Se)2 Devices

As a wide‐bandgap semiconductor, titanium dioxide (TiO₂) with a porous structure has proven useful in dye‐sensitized solar cells, but its application in low‐cost, high‐efficiency inorganic photovoltaic devices based on materials such as Cu(InGa)Se₂ or Cu₂ZnSnS₄ is limited. Here, a thin film made from solution‐processed TiO₂ nanocrystals is demonstrated as an alternative to intrinsic zinc oxide (i‐ZnO) as the window layer of CuInS_xSe_1?x solar cells. The as‐synthesized, well‐dispersed, 6 nm TiO₂ nanocrystals are assembled into thin films with controllable thicknesses of 40, 80, and 160 nm. The TiO₂ nanocrystal films with thicknesses of 40 and 80 nm exhibit conversion efficiencies (6.2% and 6.33%, respectively) that are comparable to that of a layer of the typical sputtered i‐ZnO (6.42%). The conversion efficiency of the devices with a TiO₂ thickness of 160 nm decreases to 2.2%, owing to the large series resistance. A 9‐hour reaction time leads to aggregated nanoparticles with a much‐lower efficiency (2%) than that of the well‐dispersed TiO₂ nanoparticles prepared using a 15‐hour reaction time. Under optimized conditions, the champion TiO₂ nanocrystal‐film‐based device shows even higher efficiency (9.2%) than a control device employing a typical i‐ZnO film (8.6%).     

High-light induced singlet oxygen formation in cytochrome b6f complex from Bryopsis corticulans as detected by EPR spectroscopy

Electron paramagnetic resonance (EPR) spectroscopy was used to detect the light-induced formation of singlet oxygen (¹O₂*) in the intact and the Rieske-depleted cytochrome b₆f complexes (Cyt b₆f) from Bryopsis corticulans, as well as in the isolated Rieske Fe–S protein. It is shown that, under white-light illumination and aerobic conditions, chlorophyll a (Chl a) bound in the intact Cyt b₆f can be bleached by light-induced ¹O₂*, and that the ¹O₂* production can be promoted by D₂O or scavenged by extraneous antioxidants such as l-histidine, ascorbate, β-carotene and glutathione. Under similar experimental conditions, ¹O₂* was also detected in the Rieske-depleted Cyt b₆f complex, but not in the isolated Rieske Fe–S protein. The results prove that Chl a cofactor, rather than Rieske Fe–S protein, is the specific site of ¹O₂* formation, a conclusion which draws further support from the generation of ¹O₂* with selective excitation of Chl a using monocolor red light.     

Temporal evolution of the electron diffusion coefficient in electrolyte-filled mesoporous nanocrystalline TiO2 films

Electron transport in electrolyte-filled mesoporous TiO₂-based solar cells is described quantitatively from the perspective of the continuous-time random walk model. An analytical expression is derived for the time-dependent diffusion coefficient of electrons, which transforms at a characteristic (Fermi) time from strongly time-dependent values (dispersive transport) at short times to relatively time-independent values (nondispersive transport) at long times. At short times, the diffusion coefficient displays a power-law behavior with time. The timescale for the diffusion coefficient to reach its steady-state value is substantially longer than the Fermi time. The Fermi time and the steepness of the distribution of waiting times associated with trap sites have a strong influence on both the steady-state diffusion coefficient of electrons and on the dispersiveness of electron transport. At short timescales, ionic drag, associated with the ambipolar effect, slows electron transport through the TiO₂ matrix, whereas at steady state, transport is trap limited. Decreasing the electron density lowers the steady-state limit of the diffusion coefficient and increases the timescale over which transport is dispersive.     

Enhanced Efficiency and Stability of Perovskite Solar Cells Through Nd‐Doping of Mesostructured TiO2

Block‐copolymer templated chemical solution deposition is used to prepare mesoporous Nd‐doped TiO₂ electrodes for perovskite‐based solar cells. X‐ray diffraction and photothermal deflection spectroscopy show substitutional incorporation into the TiO₂ crystal lattice for low Nd concentration, and increasing interstitial doping for higher concentrations. Substitutional Nd‐doping leads to an increase in stability and performance of perovskite solar cells by eliminating defects and thus increasing electron transport and reducing charge recombination in the mesoporous TiO₂. The optimized doping concentration of 0.3% Nd enables the preparation of perovskite solar cells with stabilized power conversion efficiency of >18%.     

Enhanced Photodegradation of PNP on Soil Surface under UV Irradiation with TiO2

Photodegradation of p-nitrophenol (PNP) on soil surface was investigated to explore the photochemical remediation of soil polluted by nitrophenols. Soil samples spiked with PNP were irradiated by UV light with and without the addition of TiO ₂ . The addition of 0.5–2 wt% TiO ₂ enhanced PNP photodegradation with approximately 1.36 times increase in apparent rate of PNP disappearance. Soil moisture, humic acid and soil pH were important factors influencing the rate of PNP photodegradation. Increase in soil moisture improved the degradation significantly, whereas humic acid reduced the degradation rate. Changes in soil pH resulted in different degradation rates, and higher degradation efficiencies were observed under alkaline condition.     

Antibacterial performance of nanoscaled visible-light responsive platinum-containing titania photocatalyst in vitro and in vivo

Background

Traditional antibacterial photocatalysts are primarily induced by ultraviolet light to elicit antibacterial reactive oxygen species. New generation visible-light responsive photocatalysts were discovered, offering greater opportunity to use photocatalysts as disinfectants in our living environment. Recently, we found that visible-light responsive platinum-containing titania (TiO₂–Pt) exerted high performance antibacterial property against soil-borne pathogens even in soil highly contaminated water. However, its physical and photocatalytic properties, and the application in vivo have not been well-characterized.

Methods

Transmission electron microscopy, energy dispersive spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, ultraviolet–visible absorption spectrum and the removal rate of nitrogen oxides were therefore analyzed. The antibacterial performance under in vitro and in vivo conditions was evaluated.

Results

The apparent quantum efficiency for visible light illuminated TiO₂–Pt is relatively higher than several other titania photocatalysts. The killing effect achieved approximately 2 log reductions of pathogenic bacteria in vitro. Illumination of injected TiO₂–Pt successfully ameliorated the subcutaneous infection in mice.

Conclusions

This is the first demonstration of in vivo antibacterial use of TiO₂–Pt nanoparticles. When compared to nanoparticles of some other visible-light responsive photocatalysts, TiO₂–Pt nanoparticles induced less adverse effects such as exacerbated platelet clearance and hepatic cytotoxicity in vivo.

General significance

These findings suggest that the TiO₂–Pt may have potential application on the development of an antibacterial material in both in vitro and in vivo settings.     

Heme-heme and heme-ligand interactions in the di-heme oxygen-reducing site of cytochrome bd from Escherichia coli revealed by nanosecond absorption spectroscopy

Cytochrome bd is a terminal quinol:O₂ oxidoreductase of respiratory chains of many bacteria. It contains three hemes, b₅₅₈, b₅₉₅, and d. The role of heme b₅₉₅ remains obscure. A CO photolysis/recombination study of the membranes of Escherichia coli containing either wild type cytochrome bd or inactive E445A mutant was performed using nanosecond absorption spectroscopy. We compared photoinduced changes of heme d-CO complex in one-electron-reduced, two-electron-reduced, and fully reduced states of cytochromes bd. The line shape of spectra of photodissociation of one-electron-reduced and two-electron-reduced enzymes is strikingly different from that of the fully reduced enzyme. The difference demonstrates that in the fully reduced enzyme photolysis of CO from heme d perturbs ferrous heme b₅₉₅ causing loss of an absorption band centered at 435 nm, thus supporting interactions between heme b₅₉₅ and heme d in the di-heme oxygen-reducing site, in agreement with previous works. Photolyzed CO recombines with the fully reduced enzyme monoexponentially with τ ∼ 12 μs, whereas recombination of CO with one-electron-reduced cytochrome bd shows three kinetic phases, with τ ∼ 14 ns, 14 μs, and 280 μs. The spectra of the absorption changes associated with these components are different in line shape. The 14 ns phase, absent in the fully reduced enzyme, reflects geminate recombination of CO with part of heme d. The 14-μs component reflects bimolecular recombination of CO with heme d and electron backflow from heme d to hemes b in ∼ 4% of the enzyme population. The final, 280-μs component, reflects return of the electron from hemes b to heme d and bimolecular recombination of CO in that population. The fact that even in the two-electron-reduced enzyme, a nanosecond geminate recombination is observed, suggests that namely the redox state of heme b₅₉₅, and not that of heme b₅₅₈, controls the pathway(s) by which CO migrates between heme d and the medium.     

The dynamic complex of cytochrome c6 and cytochrome f studied with paramagnetic NMR spectroscopy

The rapid transfer of electrons in the photosynthetic redox chain is achieved by the formation of short-lived complexes of cytochrome b₆f with the electron transfer proteins plastocyanin and cytochrome c₆. A balance must exist between fast intermolecular electron transfer and rapid dissociation, which requires the formation of a complex that has limited specificity. The interaction of the soluble fragment of cytochrome f and cytochrome c₆ from the cyanobacterium Nostoc sp. PCC 7119 was studied using NMR spectroscopy and X-ray diffraction. The crystal structures of wild type, M58H and M58C cytochrome c₆ were determined. The M58C variant is an excellent low potential mimic of the wild type protein and was used in chemical shift perturbation and paramagnetic relaxation NMR experiments to characterize the complex with cytochrome f. The interaction is highly dynamic and can be described as a pure encounter complex, with no dominant stereospecific complex. Ensemble docking calculations and Monte-Carlo simulations suggest a model in which charge–charge interactions pre-orient cytochrome c₆ with its haem edge toward cytochrome f to form an ensemble of orientations with extensive contacts between the hydrophobic patches on both cytochromes, bringing the two haem groups sufficiently close to allow for rapid electron transfer. This model of complex formation allows for a gradual increase and decrease of the hydrophobic interactions during association and dissociation, thus avoiding a high transition state barrier that would slow down the dissociation process.