Titin organisation and the 3D architecture of the vertebrate-striated muscle I-band

The giant muscle protein titin (connectin) is known to serve as a cytoskeletal element in muscle sarcomeres. It elastically restrains lengthening sarcomeres, it aids the integrity and central positioning of the A-band in the sarcomere and it may act as a template upon which some sarcomeric components are laid down during myogenesis. A puzzle has been how titin molecules, arranged systematically within the hexagonal A-band lattice of myosin filaments, can redistribute through the I-band to their anchoring sites in the tetragonal Z-band lattice. Recent work by Liversage and colleagues has suggested that there are six titin molecules per half myosin filament. Since there are two actin filaments per half myosin filament in a half sarcomere, this means that there are three titin molecules interacting with each Z-band unit cell containing one actin filament in the same sarcomere and one of opposite polarity from the next sarcomere. Liversage et al. suggested that the three titins might be distributed with two on an actin filament of one polarity and one on the filament of opposite polarity. Here, we build on this suggestion and discuss the transition of titin from the A-band to the Z-band. We show that there are good structural and mechanical reasons why titin might be organised as Liversage et al., suggested and we discuss the possible relationships between A-band arrangements in successive sarcomeres along a myofibril.     

Myosin filament sliding through the Z-disc relates striated muscle fibre structure to function

Striated muscle contraction requires intricate interactions of microstructures. The classic textbook assumption that myosin filaments are compressed at the meshed Z-disc during striated muscle fibre contraction conflicts with experimental evidence. For example, myosin filaments are too stiff to be compressed sufficiently by the muscular force, and, unlike compressed springs, the muscle fibres do not restore their resting length after contractions to short lengths. Further, the dependence of a fibre''s maximum contraction velocity on sarcomere length is unexplained to date. In this paper, we present a structurally consistent model of sarcomere contraction that reconciles these findings with the well-accepted sliding filament and crossbridge theories. The few required model parameters are taken from the literature or obtained from reasoning based on structural arguments. In our model, the transition from hexagonal to tetragonal actin filament arrangement near the Z-disc together with a thoughtful titin arrangement enables myosin filament sliding through the Z-disc. This sliding leads to swivelled crossbridges in the adjacent half-sarcomere that dampen contraction. With no fitting of parameters required, the model predicts straightforwardly the fibre''s entire force–length behaviour and the dependence of the maximum contraction velocity on sarcomere length. Our model enables a structurally and functionally consistent view of the contractile machinery of the striated fibre with possible implications for muscle diseases and evolution.     

PEVK domain of titin: an entropic spring with actin-binding properties

The PEVK domain of the giant muscle protein titin is a proline-rich sequence with unknown secondary/tertiary structure. Here we compared the force-extension behavior of cloned cardiac PEVK titin measured by single-molecule atomic force spectroscopy with the extensibility of the PEVK domain measured in intact cardiac muscle sarcomeres. The analysis revealed that cardiac PEVK titin acts as an entropic spring with the properties of a random coil exhibiting mechanical conformations of different flexibility. Since in situ, titin is in close proximity to the thin filaments, we also studied whether the PEVK domain of cardiac or skeletal titin may interact with actin filaments. Interaction was indeed found in the in vitro motility assay, in which recombinant PEVK titin constructs slowed down the sliding velocity of actin filaments over myosin. Skeletal PEVK titin affected the actin sliding to a lesser degree than cardiac PEVK titin. The cardiac PEVK effect was partially suppressed by physiological Ca(2+) concentrations, whereas the skeletal PEVK effect was independent of [Ca(2+)]. Cosedimentation assays confirmed the Ca(2+)-modulated actin-binding propensity of cardiac PEVK titin, but did not detect interaction between actin and skeletal PEVK titin. In myofibrils, the relatively weak actin-PEVK interaction gives rise to a viscous force component opposing filament sliding. Thus, the PEVK domain contributes not only to the extensibility of the sarcomere, but also affects contractile properties.     

Calcium-dependent inhibition of in vitro thin-filament motility by native titin

Titin (also known as connectin) is a giant filamentous protein that spans the distance between the Z- and M-lines of the vertebrate muscle sarcomere and plays a fundamental role in the generation of passive tension. Titin has been shown to bind strongly to myosin, making it tightly associated to the thick filament in the sarcomere. Recent observations have suggested the possibility that titin also interacts with actin, implying further functions of titin in muscle contraction. We show — using in vitro motility and binding assays — that native titin interacts with both filamentous actin and reconstituted thin filaments. The interaction results in the inhibition of the filaments' in vitro motility. Furthermore, the titin-thin filament interaction occurs in a calcium-dependent manner: increased calcium results in enhanced binding of thin filaments to titin and greater suppression of in vitro motility.     

Architecture of the sarcomere matrix of skeletal muscle: immunoelectron microscopic evidence that suggests a set of parallel inextensible nebulin filaments anchored at the Z line

Nebulin, a giant myofibrillar protein (600-800 kD) that is abundant (3%) in the sarcomere of a wide range of skeletal muscles, has been proposed as a component of a cytoskeletal matrix that coexists with actin and myosin filaments within the sarcomere. Immunoblot analysis indicates that although polypeptides of similar size are present in cardiac and smooth muscles at low abundance, those proteins show no immunological cross-reactivity with skeletal muscle nebulin. Gel analysis reveals that nebulins in various skeletal muscles of rabbit belong to at least two classes of size variants. A monospecific antibody has been used to localize nebulin by immunoelectron microscopy in a mechanically split rabbit psoas muscle fiber preparation. Labeled split fibers exhibit six pairs of stripes of antibody-imparted transverse densities spaced at 0.1-1.0 micron from the Z line within each sarcomere. These epitopes maintain a fixed distance to the Z line irrespective of sarcomere length and do not exhibit the characteristic elastic stretch-response of titin epitopes within the I band domain. It is proposed that nebulin constitutes a set of inextensible filaments attached at one end to the Z line and that nebulin filaments are in parallel, and not in series, with titin filaments. Thus the skeletal muscle sarcomere may have two sets of nonactomyosin filaments: a set of I segment-linked nebulin filaments and a set of A segment-linked titin filaments. This four-filament sarcomere model raises the possibility that nebulin and titin might act as organizing templates and length- determining factors for actin and myosin respectively.     

The titin A-band rod domain is dispensable for initial thick filament assembly in zebrafish

The sarcomeres of skeletal and cardiac muscle are highly structured protein arrays, consisting of thick and thin filaments aligned precisely to one another and to their surrounding matrix. The contractile mechanisms of sarcomeres are generally well understood, but how the patterning of sarcomeres is initiated during early skeletal muscle and cardiac development remains uncertain. Two of the most widely accepted hypotheses for this process include the “molecular ruler” model, in which the massive protein titin defines the length of the sarcomere and provides a scaffold along which the myosin thick filament is assembled, and the “premyofibril” model, which proposes that thick filament formation does not require titin, but that a “premyofibril” consisting of non-muscle myosin, α-actinin and cytoskeletal actin is used as a template. Each model posits a different order of necessity of the various components, but these have been difficult to test in vivo. Zebrafish motility mutants with developmental defects in sarcomere patterning are useful for the elucidation of such mechanisms, and here we report the analysis of the herzschlag mutant, which shows deficits in both cardiac and skeletal muscle. The herzschlag mutant produces a truncated titin protein, lacking the C-terminal rod domain that is proposed to act as a thick filament scaffold, yet muscle patterning is still initiated, with grossly normal thick and thin filament assembly. Only after embryonic muscle contraction begins is breakdown of sarcomeric myosin patterning observed, consistent with the previously noted role of titin in maintaining the contractile integrity of mature sarcomeres. This conflicts with the “molecular ruler” model of early sarcomere patterning and supports a titin-independent model of thick filament organization during sarcomerogenesis. These findings are also consistent with the symptoms of human titin myopathies that exhibit a late onset, such as tibial muscular dystrophy.     

Evidence for a direct but sequential binding of titin to tropomyosin and actin filaments

Titin is a giant molecule that spans half a sarcomere, establishing several specific bindings with both structural and contractile myofibrillar elements. It has been demonstrated that this giant protein plays a major role in striated muscle cell passive tension and contractile filament alignment. The in vitro interaction of titin with a new partner (tropomyosin) reported here is reinforced by our recent in vitro motility study using reconstituted Ca-regulated thin filaments, myosin and a native 800-kDa titin fragment. In the presence of the tropomyosin-troponin complex, the actin filament movement onto coated S1 is improved by the titin fragment. Here, we found that two purified native titin fragments of 150 and 800 kDa, covering respectively the N1-line and the N2-line/PEVK region in the I-band and known to contain actin-binding sites, directly bind tropomyosin in the absence of actin. We have also shown that binding of the 800-kDa fragment with filamentous actin inhibited the subsequent interaction of tropomyosin with actin, as judged by cosedimentation. However, this was not the case if the complex of actin and tropomyosin was formed before the addition of the 800-kDa fragment. We thus conclude that a sequential arrangement of contacts exists between parts of the titin I-band region, tropomyosin and actin in the thin filament.     

Studies on cardiac myofibrillogenesis with antibodies to titin, actin, tropomyosin, and myosin

Cardiac myofibrillogenesis was examined in cultured chick cardiac cells by immunofluorescence using antibodies against titin, actin, tropomyosin, and myosin. Primitive cardiomyocytes initially contained stress fiber-like structures (SFLS) that stained positively for alpha actin and/or muscle tropomyosin. In some cases the staining for muscle tropomyosin and alpha actin was disproportionate; this suggests that the synthesis and/or assembly of these two isoforms into the SFLS may not be stoichiometric. The alpha actin containing SFLS in these myocytes could be classified as either central or peripheral; central SFLS showed developing sarcomeric titin while peripheral SFLS had weak titin fluorescence and a more uniform stain distribution. Sarcomeric patterns of titin and myosin were present at multiple sites on these structures. A pair of titin staining bands was clearly associated with each developing A band even at the two or three sarcomere stage, although occasional examples of a titin band being associated with a half sarcomere were noted. The appearance of sarcomeric titin patterns coincided or preceded sarcomere periodicity of either alpha actin or muscle tropomyosin. The early appearance of titin in myofibrillogenesis suggests it may have a role in filament alignment during sarcomere assembly.     

Elastic filaments in situ in cardiac muscle: deep-etch replica analysis in combination with selective removal of actin and myosin filaments

To clarify the full picture of the connectin (titin) filament network in situ, we selectively removed actin and myosin filaments from cardiac muscle fibers by gelsolin and potassium acetate treatment, respectively, and observed the residual elastic filament network by deep-etch replica electron microscopy. In the A bands, elastic filaments of uniform diameter (6-7 nm) projecting from the M line ran parallel, and extended into the I bands. At the junction line in the I bands, which may correspond to the N2 line in skeletal muscle, individual elastic filaments branched into two or more thinner strands, which repeatedly joined and branched to reach the Z line. Considering that cardiac muscle lacks nebulin, it is very likely that these elastic filaments were composed predominantly of connectin molecules; indeed, anti-connectin monoclonal antibody specifically stained these elastic filaments. Further, striations of approximately 4 nm, characteristic of isolated connectin molecules, were also observed in the elastic filaments. Taking recent analyses of the structure of isolated connectin molecules into consideration, we concluded that individual connectin molecules stretched between the M and Z lines and that each elastic filament consisted of laterally-associated connectin molecules. Close comparison of these images with the replica images of intact and S1-decorated sarcomeres led us to conclude that, in intact sarcomeres, the elastic filaments were laterally associated with myosin and actin filaments in the A and I bands, respectively. Interestingly, it was shown that the elastic property of connectin filaments was not restricted by their lateral association with actin filaments in intact sarcomeres. Finally, we have proposed a new structural model of the cardiac muscle sarcomere that includes connectin filaments.     

A Nebulin Ruler Does Not Dictate Thin Filament Lengths

To generate force, striated muscle requires overlap between uniform-length actin and myosin filaments. The hypothesis that a nebulin ruler mechanism specifies thin filament lengths by targeting where tropomodulin (Tmod) caps the slow-growing, pointed end has not been rigorously tested. Using fluorescent microscopy and quantitative image analysis, we found that nebulin extended 1.01-1.03 μm from the Z-line, but Tmod localized 1.13-1.31 μm from the Z-line, in seven different rabbit skeletal muscles. Because nebulin does not extend to the thin filament pointed ends, it can neither target Tmod capping nor specify thin filament lengths. We found instead a strong correspondence between thin filament lengths and titin isoform sizes for each muscle. Our results suggest the existence of a mechanism whereby nebulin specifies the minimum thin filament length and sarcomere length regulates and coordinates pointed-end dynamics to maintain the relative overlap of the thin and thick filaments during myofibril assembly.     

The effect of genetically expressed cardiac titin fragments on in vitro actin motility.

Titin is a striated muscle-specific giant protein (M(r) approximately 3,000,000) that consists predominantly of two classes of approximately 100 amino acid motifs, class I and class II, that repeat along the molecule. Titin is found inside the sarcomere, in close proximity to both actin and myosin filaments. Several biochemical studies have found that titin interacts with myosin and actin. In the present work we investigated whether this biochemical interaction is functionally significant by studying the effect of titin on actomyosin interaction in an in vitro motility assay where fluorescently labeled actin filaments are sliding on top of a lawn of myosin molecules. We used genetically expressed titin fragments containing either a single class I motif (Ti I), a single class II motif (Ti II), or the two motifs linked together (Ti I-II). Neither Ti I nor Ti II alone affected actin-filament sliding on either myosin, heavy meromyosin, or myosin subfragment-1. In contrast, the linked fragment (Ti I-II) strongly inhibited actin sliding. Ti I-II-induced inhibition was observed with full-length myosin, heavy meromyosin, and myosin subfragment-1. The degree of inhibition was largest with myosin subfragment-1, intermediate with heavy meromyosin, and smallest with myosin. In vitro binding assays and electrophoretic analyses revealed that the inhibition is most likely caused by interaction between the actin filament and the titin I-II fragment. The physiological relevance of the novel finding of motility inhibition by titin fragments is discussed.     

Myosin filament polymerization and depolymerization in a model of partial length adaptation in airway smooth muscle

Length adaptation in airway smooth muscle (ASM) is attributed to reorganization of the cytoskeleton, and in particular the contractile elements. However, a constantly changing lung volume with tidal breathing (hence changing ASM length) is likely to restrict full adaptation of ASM for force generation. There is likely to be continuous length adaptation of ASM between states of incomplete or partial length adaption. We propose a new model that assimilates findings on myosin filament polymerization/depolymerization, partial length adaptation, isometric force, and shortening velocity to describe this continuous length adaptation process. In this model, the ASM adapts to an optimal force-generating capacity in a repeating cycle of events. Initially the myosin filament, shortened by prior length changes, associates with two longer actin filaments. The actin filaments are located adjacent to the myosin filaments, such that all myosin heads overlap with actin to permit maximal cross-bridge cycling. Since in this model the actin filaments are usually longer than myosin filaments, the excess length of the actin filament is located randomly with respect to the myosin filament. Once activated, the myosin filament elongates by polymerization along the actin filaments, with the growth limited by the overlap of the actin filaments. During relaxation, the myosin filaments dissociate from the actin filaments, and then the cycle repeats. This process causes a gradual adaptation of force and instantaneous adaptation of shortening velocity. Good agreement is found between model simulations and the experimental data depicting the relationship between force development, myosin filament density, or shortening velocity and length.     

The length–tension curve in muscle depends on lattice spacing

Classic interpretations of the striated muscle length–tension curve focus on how force varies with overlap of thin (actin) and thick (myosin) filaments. New models of sarcomere geometry and experiments with skinned synchronous insect flight muscle suggest that changes in the radial distance between the actin and myosin filaments, the filament lattice spacing, are responsible for between 20% and 50% of the change in force seen between sarcomere lengths of 1.4 and 3.4 µm. Thus, lattice spacing is a significant force regulator, increasing the slope of muscle''s force–length dependence.     

Evidence for the oligomeric state of 'elastic' titin in muscle sarcomeres

The giant protein titin has important roles in muscle sarcomere integrity, elasticity and contractile activity. The key role in elasticity was highlighted in recent years by single-molecule mechanical studies, which showed a direct relationship between the non-uniform structure of titin and the hierarchical mechanism of its force-extension behavior. Further advances in understanding mechanisms controlling sarcomere structure and elasticity require detailed knowledge of titin arrangement and interactions in situ. Here we present data on the structure and self-interactive properties of an ∼ 290 kDa (∼ 100 nm long) tryptic fragment from the I-band part of titin that is extensible in situ. The fragment includes the conserved ‘distal’ tandem Ig segment of the molecule and forms side-by-side oligomers with distinctive 4 nm cross-striations. Comparisons between these oligomers and the end filaments seen at the tips of native thick filaments indicate identical structure. This shows that end-filaments are formed by the elastic parts of six titin molecules connecting each end of the thick filament to the Z-line. Self-association of elastic titin into stiff end-filaments adds a further hierarchical level in the mechanism of titin extensibility in muscle cells. Self-association of this part of titin may be required to prevent interference of the individual flexible molecules with myosin cross-bridges interacting with actin.     

X-ray diffraction evidence for the extensibility of actin and myosin filaments during muscle contraction.

To clarify the extensibility of thin actin and thick myosin filaments in muscle, we examined the spacings of actin and myosin filament-based reflections in x-ray diffraction patterns at high resolution during isometric contraction of frog skeletal muscles and steady lengthening of the active muscles using synchrotron radiation as an intense x-ray source and a storage phosphor plate as a high sensitivity, high resolution area detector. Spacing of the actin meridional reflection at approximately 1/2.7 nm-1, which corresponds to the axial rise per actin subunit in the thin filament, increased about 0.25% during isometric contraction of muscles at full overlap length of thick and thin filaments. The changes in muscles stretched to approximately half overlap of the filaments, when they were scaled linearly up to the full isometric tension, gave an increase of approximately 0.3%. Conversely, the spacing decreased by approximately 0.1% upon activation of muscles at nonoverlap length. Slow stretching of a contracting muscle increased tension and increased this spacing over the isometric contraction value. Scaled up to a 100% tension increase, this corresponds to a approximately 0.26% additional change, consistent with that of the initial isometric contraction. Taken together, the extensibility of the actin filament amounts to 3-4 nm of elongation when a muscle switches from relaxation to maximum isometric contraction. Axial spacings of the layer-line reflections at approximately 1/5.1 nm-1 and approximately 1/5.9 nm-1 corresponding to the pitches of the right- and left-handed genetic helices of the actin filament, showed similar changes to that of the meridional reflection during isometric contraction of muscles at full overlap. The spacing changes of these reflections, which also depend on the mechanical load on the muscle, indicate that elongation is accompanied by slight changes of the actin helical structure possibly because of the axial force exerted by the actomyosin cross-bridges. Additional small spacing changes of the myosin meridional reflections during length changes applied to contracting muscles represented an increase of approximately 0.26% (scaled up to a 100% tension increase) in the myosin periodicity, suggesting that such spacing changes correspond to a tension-related extension of the myosin filaments. Elongation of the myosin filament backbone amounts to approximately 2.1 nm per half sarcomere. The results indicate that a large part (approximately 70%) of the sarcomere compliance of an active muscle is caused by the extensibility of the actin and myosin filaments; 42% of the compliance resides in the actin filaments, and 27% of it is in the myosin filaments.     

Thin filament length regulation in striated muscle sarcomeres: pointed-end dynamics go beyond a nebulin ruler

The actin (thin) filaments in striated muscle are highly regulated and precisely specified in length to optimally overlap with the myosin (thick) filaments for efficient myofibril contraction. Here, we review and critically discuss recent evidence for how thin filament lengths are controlled in vertebrate skeletal, vertebrate cardiac, and invertebrate (arthropod) sarcomeres. Regulation of actin polymerization dynamics at the slow-growing (pointed) ends by the capping protein tropomodulin provides a unified explanation for how thin filament lengths are physiologically optimized in all three muscle types. Nebulin, a large protein thought to specify thin filament lengths in vertebrate skeletal muscle through a ruler mechanism, may not control pointed-end actin dynamics directly, but instead may stabilize a large core region of the thin filament. We suggest that this stabilizing function for nebulin modifies the lengths primarily specified by pointed-end actin dynamics to generate uniform filament lengths in vertebrate skeletal muscle. We suggest that nebulette, a small homolog of nebulin, may stabilize a correspondingly shorter core region and allow individual thin filament lengths to vary according to working sarcomere lengths in vertebrate cardiac muscle. We present a unified model for thin filament length regulation where these two mechanisms cooperate to tailor thin filament lengths for specific contractile environments in diverse muscles.     

Sarcomeric pattern formation by actin cluster coalescence

Contractile function of striated muscle cells depends crucially on the almost crystalline order of actin and myosin filaments in myofibrils, but the physical mechanisms that lead to myofibril assembly remains ill-defined. Passive diffusive sorting of actin filaments into sarcomeric order is kinetically impossible, suggesting a pivotal role of active processes in sarcomeric pattern formation. Using a one-dimensional computational model of an initially unstriated actin bundle, we show that actin filament treadmilling in the presence of processive plus-end crosslinking provides a simple and robust mechanism for the polarity sorting of actin filaments as well as for the correct localization of myosin filaments. We propose that the coalescence of crosslinked actin clusters could be key for sarcomeric pattern formation. In our simulations, sarcomere spacing is set by filament length prompting tight length control already at early stages of pattern formation. The proposed mechanism could be generic and apply both to premyofibrils and nascent myofibrils in developing muscle cells as well as possibly to striated stress-fibers in non-muscle cells.     

A mathematical model of the sarcomere mechanics of cross-striated muscle with consideration of the stretch and twist of actin filaments

A mathematical model of sarcomere mechanics, which takes into account the elongation of actin and myosin filaments and also twisting of the actin filaments in the sarcomere of striated muscle during contraction is presented. The model accounts for the experimentally observed phenomena of the stretch and twist of the actin filaments due to strong binding of myosin heads and the pulling force. Some model parameters were estimated from published experimental data. The results of modeling show that the twist of actin filaments can play a substantial role in the mechanical responses of contracting muscle fibers to step changes of their length.     

An activatable molecular spring reduces muscle tearing during extreme stretching

The purpose of this study was to determine failure stresses and failure lengths of actively and passively stretched myofibrils. As expected, myofibrils failed at average sarcomere lengths (about 6–7 μm) that vastly exceeded sarcomere lengths at which actin–myosin filament overlap ceases to exist (4 μm) and thus actin–myosin-based cross-bridge forces are zero at failure. Surprisingly, however, actively stretched myofibrils had much greater failure stresses and failure energies than passively stretched myofibrils, thereby providing compelling evidence for strong force production independent of actin–myosin-based cross-bridge forces. Follow-up experiments in which titin was deleted and cross-bridge formation was inhibited at high and low calcium concentrations point to titin as the regulator of this force, independent of calcium. The results of this study point to a mechanism of force production that reduces stretch-induced muscle damage at extreme length and limits injury and force loss within physiologically relevant ranges of sarcomere and muscle lengths.     

X-ray diffraction studies of the contractile mechanism in single muscle fibres

The molecular mechanism of muscle contraction was investigated in intact muscle fibres by X-ray diffraction. Changes in the intensities of the axial X-ray reflections produced by imposing rapid changes in fibre length establish the average conformation of the myosin heads during active isometric contraction, and show that the heads tilt during the elastic response to a change in fibre length and during the elementary force generating process: the working stroke. X-ray interference between the two arrays of myosin heads in each filament allows the axial motions of the heads following a sudden drop in force from the isometric level to be measured in situ with unprecedented precision. At low load, the average working stroke is 12 nm, which is consistent with crystallographic studies. The working stroke is smaller and slower at a higher load. The compliance of the actin and myosin filaments was also determined from the change in the axial spacings of the X-ray reflections following a force step, and shown to be responsible for most of the sarcomere compliance. The mechanical properties of the sarcomere depend on both the motor actions of the myosin heads and the compliance of the myosin and actin filaments.