Langmuir-Blodgett films of a novel cellulose derivative with dihydrophytyl group: the ability to anchor beta-carotene molecules

A novel cellulose derivative, 6-O-dihydrophytylcellulose (DHPC), was first synthesized via a ring-opening polymerization and allowed to self-assemble onto an air-water interface. Langmuir-Blodgett (LB) films were characterized with atomic force microscope (AFM), UV-vis spectroscopy, and Fourier transform infrared spectroscopy. The surface pressure-area (pi-A) isotherms for DHPC and beta-carotene (betaC) mixture indicated strong interaction between these compounds to pack well. Thus, DHPC has the ability to anchor betaC in the monolayer. It was proved that a betaC-DHPC monolayer was transferred successfully onto a substrate, yielding Y-type LB films by UV spectroscopic analysis. The transmission and reflection-absorption IR spectra (RAS) indicated that the dihydrophytyl chains had almost trans-zigzag conformation and were oriented nearly perpendicular to the substrate. AFM section analysis revealed the thickness per layer to be 2.32 nm. Consequently, DHPC was found to be an appropriate matrix to fabricate the mixed LB films containing betaC.     

UV-induced reaction kinetics of dilinoleoylphosphatidylethanolamine monolayers

The UV-induced reactivity of dilinoleoylphosphatidylethanolamine (DLiPE) Langmuir and Langmuir-Blodgett films has been studied by in situ measurements of the changes in the mean molecular area, UV-vis and Fourier transform infrared spectroscopy, and atomic force microscopy (AFM). Optimum orientation and packing density of the DLiPE molecules in the monolayer were achieved by adding uranyl acetate to the subphase. A first-order reaction kinetic model was successfully fitted to the experimental reaction kinetics data obtained at a surface pressure of 30 mN/m. Topographical studies of LB films by AFM were performed on bilayer structures as a function of subphase composition and UV irradiation time. The orientational effect of the uranyl ions on the monolayer molecules was observed as an enhanced homogeneity of the freshly prepared monomeric LB films. However, the long-term stability of these films proved to be bad; clear reorganization and loss of a true monolayer structure were evidenced by the AFM images. This instability was inhibited for the UV-irradiated films, indicating that the UV irradiation gave rise to a cross-linked structure.     

Preparation and characterization of monolayer and multilayer Langmuir-Blodgett films of a series of 6-O-alkylcelluloses

Monolayer and multilayer Langmuir-Blodgett (LB) films of 6-O-alkylcelluloses with various chain lengths were prepared and studied. The surface pressure (pi)-area (A) isotherms of 6-O-alkylcelluloses exhibited characteristic behaviors depending on the length of the alkyl chain and temperature. 6-O-Stearylcellulose on the subphase formed a homogeneous monolayer at 10 mN m(-1). By transfer ratio, FT-IR, and contact angle measurements, it was proved that the monolayer of 6-O-stearylcellulose on the water surface was transferred successfully onto a substrate by a vertical dipping method to form a Z-type LB film. The transmission and reflection absorption IR spectrum indicated that the hydrocarbon chains had all-trans rotamers and were oriented nearly perpendicular to the surface in the film. AFM section analysis revealed that the thickness per layer was calculated to be 2.35 nm. These results suggested that the hydrocarbon chains were inclined at an angle of about 25.3 degrees to have high packing density in the alkyl region.     

Effect of surface coverage of gold(111) electrode with cysteine on the chiral discrimination of DOPA

The enantioselectivity imparted to a gold electrode by modifying its surface with a self-assembled monolayer (SAM) of cysteine (Cys) was investigated for the electrochemical redox reaction of 3,4-dihydroxyphenylalanine (DOPA). A cyclic voltammetric study of the redox reaction revealed that the enantioselectivity was determined by the surface coverage of the gold electrode with Cys molecules. The electrode modified with approximately 1.8 x 10(14) Cys molecules cm(-2) exhibited enantioselectivity in the voltammogram for the oxidation and reduction of DOPA, while the voltammograms obtained by the electrodes with either more or less surface coverages did not exhibit significant enantioselectivity. It is suggested that the accessibility of DOPA to that area of the gold surface which is not blocked by Cys molecules at an optimum surface coverage, is required for the enantioselective redox reaction of DOPA to proceed.     

Self-assembly effect during the adsorption of polynucleotides on stearic acid langmuir-blodgett monolayer

Interaction of polyadenylic acid, poly(A), with stearic acid Langmuir-Blodgett (LB) monolayer was studied in different electrolyte surroundings. For this purpose LB films of stearic acid, transferred on the mica substrate from poly(A) containing subphase, were analyzed with atomic force microscopy (AFM). The density of polynucleotides surface coverage is ruled by the monovalent electrolyte concentration in the subphase that is in good agreement with previous results. Divalent cations in the subphase are needed to stabilize poly(A) molecules on the surface through formation of "salt bridges". At the very low divalent electrolyte concentration polynucleotides adsorb on the LB film to domains in which the effect of self-assembly is observed. Increase of divalent electrolyte concentration leads to the loss of this orientation effect. The explanation of this effect is proposed.     

Microdomains in mixed monolayers of oleanolic and stearic acids: thermodynamic study and BAM observation at the air-water interface and AFM and FTIR analysis of LB monolayers

Monolayers of oleanolic acid (OLA) mixed with stearic acid (SA) were studied at the air-water interface. The surface pressure-area (pi-A) isotherms, measured over the whole composition range, and BAM observations were used to investigate the phase behaviour and self-organization of these components in a two-dimensional structure. Pure OLA forms a very compressible monolayer, and BAM observation revealed the coexistence of large and irregular solid domains of different thickness dispersed in a gas matrix, compatible with the two most probable orientations of the OLA molecule at the interface. Mixtures of OLA/SA form condensed monolayers from low surface pressures and the thermodynamic analysis indicates that OLA molecules, in the presence of the long-chain SA, orient with the major axis almost perpendicular to the interface. Langmuir-Blodgett (LB) monolayers of pure SA and mixtures were further characterized by atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR). AFM images of LB mixed monolayers evidenced microphase separation, not observable by BAM. The SA rich domains are 4-6A thicker than those rich in OLA. The FTIR spectra of mixed LB films on CaF2 substrates showed that OLA does not perturb the all-trans conformation of the SA long alkyl chains, up to a mole fraction of 0.4. The carbonyl-stretching band of OLA suggests that the carboxylic groups of neighbour OLA molecules are involved in hydrogen bonds, forming dimers, as in pure solid phase OLA. These interactions seem to prevail over the OLA-water hydrogen bonds.     

Enhanced activity of horseradish peroxidase in Langmuir-Blodgett films of phospholipids

The immobilization of enzymes in nanostructured films has potential applications, e.g. in biosensing, for which the activity may not only be preserved, but also enhanced if optimized conditions are identified. Optimization is not straightforward because several requirements must be fulfilled, including a suitable matrix and film-forming technique. In this study, we show that horseradish peroxidase (HRP) has its activity enhanced when immobilized in Langmuir-Blodgett (LB) films, in conjunction with dipalmitoylphosphatidylglycerol (DPPG). Incorporation of HRP into a DPPG monolayer at the air-water interface was demonstrated with compression isotherms, and Polarization-Modulation Infrared Reflection Absorption Spectroscopy (PM-IRRAS). From the PM-IRRAS data, we inferred that HRP was not denatured when adsorbed on a pre-formed, low pressure DPPG monolayer. A change in orientation was induced by the phospholipid matrix, with the amide CO and NH groups from HRP being oriented perpendicular to the surface, parallel to the DPPG acyl chains, i.e. the α-helix was inserted into the monolayer. The mixed DPPG-HRP monolayer could be transferred onto solid supports, to which HRP activity was ca. 23% higher than in solution. The control of molecular architecture and choice of a suitable phospholipid matrix allowed HRP-containing LB films to be used in sensing peroxide.     

Surface properties of two rabbit lung lamellar body preparations with markedly different fatty acid profiles

The effect of fatty acid desaturation on the surface properties of lung surfactant were studied on a Wilhelmy surface balance by using two preparations of lamellar body (LB) material with markedly different fatty acid profiles: (1) lamellar bodies from adult rabbit lung tissue, and (2) lamellar bodies from fetal rabbit lung tissue maintained in organ culture for 7 days. The fetal lung preparation contains an unusually high level of 16: 1 fatty acid (principally palmitoleic acid) at position sn-2 of phosphatidylcholine (Longmuir, K.J., Resele-Tiden, C. and Rossi M.E. (1988) J. Lipid Res. 29, 1065-1077). Surface pressure-surface area isotherms were obtained for both preparations and compared to isotherms of monolayers of dipalmitoylphosphatidylcholine. In addition, the elasticity of the lamellar body preparations were analyzed as a function of surface pressure, temperature, and rate of compression, both in the presence and absence of Ca2+ plus Mg2+. At slow rates of compression, we found that fetal LB films have lower elasticity and better respreading ability compared to the adult LB films, which can be explained by the high concentration of unsaturated palmitoleic acid in the fetal preparation. A dynamic component of elasticity was observed at high rates of compression only if Ca2+ and Mg2+ were present in the subphase. The analysis of the free energies, enthalpies and entropies of compression suggests that films with low concentrations of unsaturated fatty acids are are likely to undergo irreversible collapse, but films with excess unsaturated fatty acids accommodate the overcompression with a reversible loss of molecules from the surface.     

Fabrication and structural characterization of the Langmuir–Blodgett films from a new chitosan derivative containing cinnamate chromophores

A new amphiphilic chitosan derivative, octanoylchitosan cinnamate (OCC) was synthesized through regioselective modifications of chitosan. A solution of OCC was spread to water to form a stable monolayer at the air/water interface. The surface pressure (π)–area (A) isotherm indicated that the polymer had a limiting area of about 100 Å² per repeat unit. YZ-type multilayers were deposited onto hydrophobic substrates through Langmuir–Blodgett (LB) technique. The structural features of the LB films were investigated by UV absorption, circular dichroism (CD) and linear dichroism (LD) spectroscopy. The results showed that the intrinsic chirality originating from the helical order of the OCC backbones was maintained in the LB films. Besides, the polymer backbones were uni-axially oriented in the LB film. The ordered structures of OCC assembled in a dilute solution and in a cast film were also investigated and the results were compared with that of the LB film.     

Pulmonary surfactant proteins SP-B and SP-C in spread monolayers at the air-water interface: I. Monolayers of pulmonary surfactant protein SP-B and phospholipids.

The effects of pulmonary surfactant protein SP-B on the properties of monolayers of dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG), and a mixture of DPPC:DPPG (7:3, mol:mol) were studied using spread films at the air-water interface. The addition of SP-B to the phospholipid monolayers gave positive deviations from additivity of the mean areas in the films. At low protein concentrations (less than 45% amino acid residues which corresponds to 0.5 mol% or 10 weight% SP-B) monolayers of SP-B/DPPC, SP-B/DPPG and SP-B/(DPPC:DPPG) collapsed at surface pressures of about 70 mN.m-1, comparable to those of the lipids alone. At higher concentrations of SP-B in the protein-lipid monolayers, kink points appeared in the isotherms at about 40-45 mN.m-1, implying possible exclusion of material from the films, hence, changes in the original monolayer compositions. Calculated analyses of the monolayer compositions as a function of surface pressure indicated that nearly pure SP-B, associated with small amounts of phospholipid (2-3 lipid molecules per SP-B dimer), was lost from SP-B/DPPC, SP-B/DPPG, and SP-B/(DPPC:DPPG) films at surface pressures higher than 40-45 mN.m-1. The results are consistent with a low effectiveness of SP-B in removing saturated phospholipids, DPPC or DPPG, from the spread SP-B/phospholipid films.     

Fabrication of Langmuir-Blodgett film of a fullerene derivative with a cyclic peptide as an anchor

A novel cyclic octapeptide carrying a fullerene unit and poly(ethylene glycol) at the side chain (cyclo8-C 60 + PEG) was synthesized, and its monolayer formation at the air/water interface and on a substrate was studied. Surface pressure-area per molecule isotherms indicated that cyclo8-C 60 + PEG formed a stable monolayer at the air/water interface. The cyclo8-C 60 + PEG monolayers prepared from various spreading volumes (i.e., from various initial areas per molecule) overlapped nicely on a single curve, suggesting that the molecules were uniformly dispersed on the surface without aggregation of the fullerene units. The uniform dispersibility is due to the scaffold effect of the cyclic peptide unit to keep the fullerene units away from each other. The formed monolayer could be quantitatively transferred onto a solid substrate. UV-vis absorption spectroscopy of the Langmuir-Blodgett (LB) monolayer showed that the electronic structure of the fullerene unit was not affected by the formation of the monolayer. Cyclic voltammetry of the LB monolayer in an aqueous solution containing redox species indicated that the LB monolayer was densely packed. Furthermore, reversible redox peaks attributed to the one-electron reduction of the fullerene unit were observed, showing that the redox property of the fullerene unit was also retained in the monolayer. It is thus concluded that the cyclic peptide is a good candidate as a scaffold for stable monolayer formation at the air/water interface and for intact immobilization of the fullerene moiety onto a substrate.     

Interactions between lipopolysaccharide and phosphatidylethanolamine in molecular monolayers.

Lipopolysaccharide and phosphatidylethanolamine are the two major lipid constituents of the membrane of Salmonella typhimurium. Interactions between the purified lipopolysaccharide and phosphatidylethanolamine were studied in molecular monolayers at air-water interfaces. The equilibrium surface pressures of mixed films of lipopolysaccharide and phosphatidylethanolamine were determined as a function of the film composition. The plot of the equilibrium surface pressrue vs. the area occupied by phosphatidylethanolamine molecules exhibited two distinct regions. Below a phosphatidylethanolamine surface concentration at which 55% of the surface was occupied by phosphatidylethanolamine molecules, the equilibrium pressure was invariant and had the value of a pure lipopolysaccharide monolayer at maximum compression. At phosphatidylethanolamine surface concentrations in excess of 55% surface area occupation (phosphatidylethanolamine/lipopolysaccharide (mol/mol) greater than 16), the equilibrium surface pressure was a function of the surface concentration of phosphatidylethanolamine. The results suggest a simple model in which lipopolysaccharide and phosphatidylethanolamine form a complex in which each lipopolysaccharide molecule is surrounded ("lipidated") by a shell of approx. 16 phosphatidylethanolamine molecules.     

Partially induced transition from horizontal to vertical orientation of helical peptides at the air–water interface and the structure of their monolayers transferred on the solid substrates

To apply the Langmuir–Blodgett (LB) technique as a platform for investigating the fundamental properties of amphiphilic peptides (APs), we have investigated the structure of LB films using the APs. To vertically orient the helical APs like transmembrane proteins in the membrane, the primary structure of the APs was designed to have two domains: a hydrophilic domain (three amino acids) and a hydrophobic domain (ca. 20 amino acids). However, we are still far from having full control of their orientation. This study reports the contribution of the subphase temperature to the change in the orientation of helical APs. When the surface pressure–area isotherm of AP was observed at the subphase temperature at 41.5 °C, the isotherm exhibited a plateau, implying that a phase transition of the monolayer at the air–water interface occurred. Circular dichroism (CD) spectra of the monolayers transferred on the solid substrates revealed that the orientation of the helices changed at the pressure, where the plateau of the isotherm was observed. This change was not observed at 21.5 °C, i.e., the horizontal alignment of helixes was maintained. Atomic force microscopy (AFM) was used to systematically investigate the surface structure of the monolayers transferred at different surface pressures. A structural model of the monolayer that did not contradict with the results obtained by the three different techniques (the isotherm, CD spectroscopy, and AFM) was derived, and it was concluded that the horizontally oriented helices partially changed their orientation to vertical upon compression in the plateau region of the isotherm.     

Fabrication of Large-scale Nanostructure by Langmuir-Blodgett Technique

Monolayer of polymer latex spheres was prepared at the air/water interface and deposited onto glass slides through Langmuir-Blodgett （LB） technique. Large-scale, high quality hexagonally close-packed domains were found in scanning electron microscopic pictures. Details of the monolayer-forming ability were discussed. Suitable surface characteristics of the colloidal particles, especially the hydrophilic and hydrophobic properties, are the keys for the formation of ordered monolayer films. The film can be transferred onto various kinds of substrates, even high curvature surface articles, such as fibers, decorations etc, can also be used as substrates. The advantages of this fabrication method of polymer latex spheres monolayer are fast, flexible, simple and very neat.     

Flow cytometric determination of E-selectin, vascular cell adhesion molecule-1, and intercellular cell adhesion molecule-1 in formaldehyde-fixed endothelial cell monolayers

BACKGROUND: Endothelial cell adhesion molecules are involved in initiation and progression of vascular diseases. The purpose of this study was to determine conditions of fixation and dissociation of human umbilical vein endothelial cell (HUVEC) monolayers that permit a reliable flow cytometric determination of intracellular and surface content of E-selectin, vascular cell adhesion molecule-1 (VCAM-1), and intercellular adhesion molecule-1 (ICAM-1). METHODS: TNFalpha-treated HUVEC monolayers were fixed with 0.5% formaldehyde at the end of the experimental incubation. Subsequently, either the monolayer was trypsinized and thereafter the cells were subjected to indirect fluorescence labeling or the monolayer was first labeled and then dissociated by trypsinization. Cell integrity was assessed by vimentin staining. Total adhesion molecule content was detected in saponin-permeabilized cells. RESULTS: HUVEC integrity was maintained when the fixation time of the monolayer did not exceed 5 min and trypsin/EDTA was used for dissociation. Surface adhesion molecules were partially hydrolyzed by trypsin when trypsinization preceded labeling but antibody binding protected adhesion molecules from degradation. VCAM-1 and E-selectin exhibited substantial trypsin-sensitive surface fractions but surface ICAM-1 was mainly trypsin resistant. Permeabilization with 0.06% saponin allowed the detection of considerable intracellular pools of the investigated adhesion molecules. CONCLUSIONS: The described method permits the reliable determination of surface and intracellular fractions of adhesion molecules in formaldehyde-fixed HUVEC monolayers and may be used for studies on the regulation of adhesion molecule expression.     

Pulmonary surfactant proteins SP-B and SP-C in spread monolayers at the air-water interface: II. Monolayers of pulmonary surfactant protein SP-C and phospholipids.

The interaction of the hydrophobic pulmonary surfactant protein SP-C with dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylglycerol (DPPG) and DPPC:DPPG (7:3, mol:mol) in spread monolayers at the air-water interface has been studied. At low concentrations of SP-C (about 0.5 mol% or 3 weight%protein) the protein-lipid films collapsed at surface pressures of about 70 mN.m-1, comparable to those of the lipids alone. At initial protein concentrations higher than 0.8 mol%, or 4 weight%, the isotherms displayed kinks at surface pressures of about 50 mN.m-1 in addition to the collapse plateaux at the higher pressures. The presence of less than 6 mol%, or 27 weight%, of SP-C in the protein-lipid monolayers gave a positive deviation from ideal behavior of the mean areas in the films. Analyses of the mean areas in the protein-lipid films as functions of the monolayer composition and surface pressure showed that SP-C, associated with some phospholipid (about 8-10 lipid molecules per molecule of SP-C), was squeezed out from the monolayers at surface pressures of about 55 mN.m-1. The results suggest a potential role for SP-C to modify the composition of the monolayer at the air-water interface in the alveoli.     

Qualitative and quantitative analysis of the secondary structure of cytochrome C Langmuir-Blodgett films

A qualitative and quantitative analysis of the conformation of Langmuir-Blodgett (LB) dried films of cytochrome C on silicon wafers was performed by Fourier transform ir (FTIR) spectroscopy. A deconvolution procedure was applied to the amide I band analysis, in order to determine the percentage of the different secondary structures. Qualitative analysis was performed by examining difference spectra. Films obtained by spreading protein solutions at pH 7.4 and 1, dried at 25 and 100°C, on silicon wafers were also examined in order to detect spectral components associated with denatured protein domains, and to compare them with cytochrome C LB films. FTIR spectroscopy showed that the following important changes characterise LB film spectra: (a) the α-helix component is higher (its percentage is 57 and 54%) than the one estimated in dried film obtained by spreading the solutions at pH 7.4 on a silicon substrate (43%), (b) there is an increase in the intensity of bands attributed to protonated carboxy group bands, involved and not involved in the formation of hydrogen bonds, and a decrease in those attributed to deprotonated carboxy groups, (c) the intensity of several bands attributed to aromatic amino acids and aliphatic chains increases, and (d) bands due to O(SINGLEBOND)H stretching vibrations of crystallization water are present. These conformational changes could be induced by protein-protein interaction caused by the close packing of molecules that occurs during LB film formation; it cannot be excluded that they may be accompanied by partial changes in the tertiary structure of the protein. A preferential orientation of protein molecules in LB films is also a possibility. © 1997 John Wiley & Sons, Inc. Biopoly 42: 227–237, 1997     

Study of P-glycoprotein effect on the lipid monolayer properties by the Langmuir-Blodgett technique

Expression of the P-glycoprotein (Pgp) is proved to be one of the main reasons for the development of the multidrug resistance (MDR) phenotype by cancer cells. The effect of Pgp on the properties of lipid monolayers was studied using membrane fractions of sensitive and Pgp over-expressing multidrug resistance cancer cells containing 11, 24 or 32% of Pgp relative to the total content of membrane proteins. The effect of the Pgp membrane concentration on the properties of monolayers prepared from the membrane fractions was analyzed by the Langmuir-Blodgett method. The subphase composition was found to play a critical role in the stability of monolayers at any Pgp concentration. The optimal subphase comprised 10 mM tris-HCl buffer, pH 6.5, which made it possible to create very stable monolayer films with the pressure of collapse of about 30-40 mN/m. Monolayers prepared from membrane fractions of sensitive cells and cells containing the maximum (32%) amount of Pgp were found to be much more stable compared with fractions comprising 11 or 24% of Pgp. The analysis of monolayer compression dynamics revealed three distinct stages: (1) the self-organization of lipid molecules, which is characterized by an abrupt change of surface potential; (2) the compression of Pgp molecules at the constant potential of monolayers; and (3) the compression of lipid molecules, which is characterized by a quasilinear increase of both pressure and surface potential. It was shown that the specific surface areas of monolayers formed from sensitive and Pgp-enriched membranes containing 11 or 24% of Pgp are very similar, whereas the surface area of the monolayer formed from membranes containing 32% of Pgp is nearly 1.5-fold greater. This fact may reflect the effect of the threshold rearrangement of the structure of lipid molecules or cooperative modifications of lipid-Pgp interactions induced by the increase in the Pgp content from 24 to 32%. The effect of verapamil, a well-known Pgp modulator, on the properties of monolayers was studied. It was show that verapamil is able to induce changes of the surface of Pgp-containing monolayers, and these modifications are maximal at the Pgp:verapamil 1:1 molar ratio. The data present the first experimental evidence for the possible intervention of Pgp modulator into the processes of lipid-lipid or lipid-Pgp cooperative interactions within Pgp-enriched membranes.     

New catalytic properties of monoamine oxidase immobilized in Langmuir-blodgett films with amphiphilic polyelectrolytes

Langmuir-Blodgett (LB) films of monoamine oxidase (MAO) have been formed on the surface f a polypropylene membrane using amphiphilic polyelectrolytes. The enzyme activity of such protein-polyelectrolyte films was measured by a Clark electrodes. It was shown that in LB films thus formed the use of amphiphilc polyelectrolytes, MAO activity was higher than in polyelectrolyte-free LB films. Immobilization of MAO with branched polyethylenimine modified on 12% by laurylchain led to pronounced changes in its catalytic properties. The dependence of the enzyme's kinetic parameters on amphiphilic polyelectrolyte structures was discussed. (c) 1994 John Wiley & Sons, Inc.     

Bacterial lipopolysaccharide promotes destabilization of lung surfactant-like films

The airspaces are lined with a dipalmitoylphosphatidylcholine (DPPC)-rich film called pulmonary surfactant, which is named for its ability to maintain normal respiratory mechanics by reducing surface tension at the air-liquid interface. Inhaled airborne particles containing bacterial lipopolysaccharide (LPS) may incorporate into the surfactant monolayer. In this study, we evaluated the effect of smooth LPS (S-LPS), containing the entire core oligosaccharide region and the O-antigen, on the biophysical properties of lung surfactant-like films composed of either DPPC or DPPC/palmitoyloleoylphosphatidylglycerol (POPG)/palmitic acid (PA) (28:9:5.6, w/w/w). Our results show that low amounts of S-LPS fluidized DPPC monolayers, as demonstrated by fluorescence microscopy and changes in the compressibility modulus. This promoted early collapse and prevented the attainment of high surface pressures. These destabilizing effects could not be relieved by repeated compression-expansion cycles. Similar effects were observed with surfactant-like films composed of DPPC/POPG/PA. On the other hand, the interaction of SP-A, a surfactant membrane-associated alveolar protein that also binds to LPS, with surfactant-like films containing S-LPS increased monolayer destabilization due to the extraction of lipid molecules from the monolayer, leading to the dissolution of monolayer material in the aqueous subphase. This suggests that SP-A may act as an LPS scavenger.