Detection of toxic chemicals with high sensitivity by measuring the quantity of induced P450 mRNAs based on surface plasmon resonance

In this study we describe a novel sensor system to detect toxic chemicals based on measurement of the quantity of Saccharomyces cerevisiae P450 mRNAs induced by them. Detection was conducted using a flow-injection-type sensor system based on surface plasmon resonance (SPR). The DNA and peptide nucleic acid (PNA) probes containing a complementary sequence to a part of P450 mRNA were immobilized on the sensor chip and the P450 mRNAs hybridized to the probes were quantified. We succeeded in detecting 10 ng/L (10 ppt) of atrazine using both DNA and PNA probes. Using this sensor system, we were able to detect bisphenol A in addition to atrazine. Furthermore, we achieved higher sensitivity by amplifying the target P450 mRNA based on nucleic acid sequence-based amplification (NASBA). This method allows for sensitive, rapid, and easy detection of some toxic chemicals.     

Application of peptide nucleic acid to the direct detection of deoxyribonucleic acid amplified by polymerase chain reaction.

Double-stranded DNA amplified by polymerase chain reaction (PCR) was detected by peptide nucleic acid (PNA) using a BIAcore 2000 biosensor based on surface plasmon resonance (SPR). PNA is an artificial oligo amide that is capable of forming highly stable complexes with complementary oligonucleotides. We succeeded in the direct detection of double-stranded DNA, amplified by PCR with high-sequence specificity. It was shown that the target DNA was available for detection over the range of 40-160 nM. Therefore, the detection limit was 7.5 pmol of the target DNA (143 bases, applied volume 30 microliters). Our DNA detection system, the combination of BIAcore and the probe PNA, could detect the target DNA with good reproducibility. In this report, we show that our system is a powerful tool for the diagnosis of pathologically significant DNA.     

Thiolated pyrrolidinyl peptide nucleic acids for the detection of DNA hybridization using surface plasmon resonance

Thiolated pyrrolidinyl peptide nucleic acids (HS-PNAs) bearing d-prolyl-2-aminocyclopentanecarboxylic acid (ACPC) backbones with different lengths and types of thiol modifiers were synthesized and then characterized by MALDI–TOF mass spectrometry. These HS-PNAs were immobilized on gold-coated glass by self-assembled monolayer (SAM) formation via S atom linkage for the detection of DNA hybridization using surface plasmon resonance (SPR). The amount and the stability of the immobilized HS-PNAs, as well as the effects of spacer and blocking thiol on DNA hybridization efficiency, were determined. SPR results indicated that the hybridization efficiency was enhanced when the distance between the PNA portion and the thiol terminal was increased and/or when blocking thiol was used following the HS-PNA immobilization. The immobilized HS-PNA could discriminate between fully complementary DNA from one or two base mismatched DNA with a relatively high degree of mismatch discrimination (>45%) in PBS buffer at 25 °C. The lowest DNA concentration at which reliable discrimination between fully complementary and single mismatched DNA could still occur was at about 0.2 μM, which is equivalent to 10 pmol of DNA. This research demonstrates that using these novel thiolated PNAs in combination with the SPR technique offers a direct, rapid and non-label based method that could potentially be applied for the analysis of genomic or PCR-amplified DNA in the future.     

Hybridization assay of hepatitis B virus by QCM peptide nucleic acid biosensor

Although the analyses of HBV genomic DNA have traditionally been performed with commercial techniques, the high cost and long time consumed have hindered their applications in routinely diagnosis and prognosis of infection. We construct peptide nucleic acid (PNA) piezoelectric biosensor for real-time monitoring of hybridization of hepatitis B virus (HBV) genomic DNA. The PNA probe can combine to target DNA sequences more effectively and specifically than a DNA probe. The PNA probe was designed and immobilized on the surface of the biosensor to substitute the conventional DNA probe for direct detection of HBV genomic DNA without previous amplification by PCR. The hybridization assay was completed in 50 min. The detection limit was 8.6 pg/L and the clinical specificity was 94.44% compared with real time-PCR (RT-PCR). The PNA probe was able to distinguish sequences that differ only in one base. Detection sensitivity can be improved and detection time can be decreased by adding RecA protein-coated complementary ssDNA which complement to HBV gene regions. The QCM system we designed has the advantages of being rapid, label-free and highly sensitive and can be a useful supplement to commercial assay methods in clinical chemistry.     

Light-up probes: thiazole orange-conjugated peptide nucleic acid for detection of target nucleic acid in homogeneous solution

We have constructed light-up probes for nucleic acid detection. The light-up probe is a peptide nucleic acid (PNA) oligonucleotide to which the asymmetric cyanine dye thiazole orange (TO) is tethered. It combines the excellent hybridization properties of PNA and the large fluorescence enhancement of TO upon binding to DNA. When the PNA hybridizes to target DNA, the dye binds and becomes fluorescent. Free probes have low fluorescence, which may increase almost 50-fold upon hybridization to complementary nucleic acid. This makes the light-up probes particularly suitable for homogeneous hybridization assays, where separation of the bound and free probe is not necessary. We find that the fluorescence enhancement upon hybridization varies among different probes, which is mainly due to variations in free probe fluorescence. For eight probes studied the fluorescence quantum yield at 25 degrees C in the unbound state ranged from 0.0015 to 0.08 and seemed to depend mainly on the PNA sequence. The binding of the light-up probes to target DNA is highly sequence specific and a single mismatch in a 10-mer target sequence was readily identified.     

Snap-to-it probes: chelate-constrained nucleobase oligomers with enhanced binding specificity

We describe snap-to-it probes, a novel probe technology to enhance the hybridization specificity of natural and unnatural nucleic acid oligomers using a simple and readily introduced structural motif. Snap-to-it probes were prepared from peptide nucleic acid (PNA) oligomers by modifying each terminus with a coordinating ligand. The two coordinating ligands constrain the probe into a macrocyclic configuration through formation of an intramolecular chelate with a divalent transition metal ion. On hybridization with a DNA target, the intramolecular chelate in the snap-to-it probe dissociates, resulting in the probe ‘snapping-to’ and binding the target nucleic acid. Thermal transition analysis of snap-to-it probes with complementary and single-mismatch DNA targets revealed that the transition between free and target-bound probe conformations was a reversible equilibrium, and the intramolecular chelate provided a thermodynamic barrier to target binding that resulted in a significant increase in mismatch discrimination. A 4–6°C increase in specificity (ΔT_m) was observed from snap-to-it probes bearing either terminal iminodiacetic acid ligands coordinated with Ni²⁺, or terminal dihistidine and nitrilotriacetic acid ligands coordinated with Cu²⁺. The difference in specificity of the PNA oligomer relative to DNA was more than doubled in snap-to-it probes. Snap-to-it probes labeled with a fluorophore-quencher pair exhibited target-dependent fluorescence enhancement upon binding with target DNA.     

Increased stability and specificity through combined hybridization of peptide nucleic acid (PNA) and locked nucleic acid (LNA) to supercoiled plasmids for PNA-anchored "Bioplex" formation

Low cellular uptake and poor nuclear transfer hamper the use of non-viral vectors in gene therapy. Addition of functional entities to plasmids using the Bioplex technology has the potential to improve the efficiency of transfer considerably. We have investigated the possibility of stabilizing sequence-specific binding of peptide nucleic acid (PNA) anchored functional peptides to plasmid DNA by hybridizing PNA and locked nucleic acid (LNA) oligomers as "openers" to partially overlapping sites on the opposite DNA strand. The PNA "opener" stabilized the binding of "linear" PNA anchors to mixed-base supercoiled DNA in saline. For higher stability under physiological conditions, bisPNA anchors were used. To reduce nonspecific interactions when hybridizing highly cationic constructs and to accommodate the need for increased amounts of bisPNA when the molecules are uncharged, or negatively charged, we used both PNA and LNA oligomers as "openers" to increase binding kinetics. To our knowledge, this is the first time that LNA has been used together with PNA to facilitate strand invasion. This procedure allows hybridization at reduced PNA-to-plasmid ratios, allowing greater than 80% hybridization even at ratios as low as 2:1. Using significantly lower amounts of PNA-peptides combined with shorter incubation times reduces unspecific binding and facilitates purification.     

Surface plasmon field-enhanced fluorescence spectroscopy in PCR product analysis by peptide nucleic acid probes

Surface plasmon field-enhanced fluorescence spectroscopy (SPFS) was recently developed for PCR product analysis, which allowed for real-time monitoring of hybridization processes and for the detection of trace amounts of PCR products, with a detection limit of 100 fmol on the peptide nucleic acid (PNA) probe surface, and 500 fmol on the DNA probe surface. By selectively labeling the strands of PCR-amplified DNA, it was shown that the heat denaturation process in combination with the application of low-salt condition substantially reduced the interference from the antisense strands and thus simplified the surface hybridization. Furthermore, SPFS was demonstrated to be capable of quantitatively discriminating the difference induced by single nucleotide substitution, even within one minute of contact time.     

Taking control of gene expression with light-activated oligonucleotides

The recent development of caged oligonucletides that are efficiently activated by ultraviolet (UV) light creates opportunities for regulating gene expression with very high spatial and temporal resolution. By selectively modulating gene activity, these photochemical tools will facilitate efforts to elucidate gene function and may eventually serve therapeutic aims. We demonstrate how the incorporation of a photocleavable blocking group within a DNA duplex can transiently arrest DNA polymerase activity. Indeed, caged oligonucleotides make it possible to control many different protein-oligonucleotide interactions. In related experiments, hybridization of a reverse complementary (antisense) oligodeoxynucleotide to target mRNA can inhibit translation by recruiting endogenous RNases or sterically blocking the ribosome. Our laboratory recently synthesized caged antisense oligonucleotides composed of phosphorothioated DNA or peptide nucleic acid (PNA). The antisense oligonucleotide, which was attached to a complementary blocking oligonucleotide strand by a photocleavable linker, was blocked from binding target mRNA. This provided a useful method for photomodulating hybridization of the antisense strand to target mRNA. Caged DNA and PNA oligonucleotides have proven effective at photoregulating gene expression in cells and zebrafish embryos.     

Synthesis of a stable and specific surface plasmon resonance biosensor surface employing covalently immobilized peptide nucleic acids

Biosensors allow the real-time and label-free observation of biochemical reactions between various ligands including antigen-antibody reactions and nucleic acids hybridizations. In our studies, we used a surface plasmon resonance biosensor to elucidate the hybridization characteristics of a peptide nucleic acid (PNA) ligand immobilized on sensor surfaces either through covalent or streptavidin-biotin coupling. A biotin-labeled PNA was employed in the latter approach whereas the covalent immobilization included the following steps: A maleimide group was attached to the N-terminal of the PNA using N-succinimidyl 4-(N-maleimidomethyl)-cyclohexane-1-carboxylate (SMCC). To generate free thiol groups for coupling, a carboxylated dextran matrix of the sensor surface was activated with N-hydroxysuccinimide (NHS) and N-ethyl-N'-(dimethylaminopropyl)-carbodiimide (EDC) and thiolated by addition of cystamine dihydrochloride followed by reduction with 1, 4-dithioerythrite (DTE). Finally, the modified PNA was coupled to the sulfhydryl groups of the activated dextran matrix. Repetitive hybridizations of a single-stranded synthetic DNA oligomer to the PNAs demonstrated the superior stability of covalent immobilization compared to noncovalent immobilization. Differentiation of point mutations in the analyte molecule was accomplished at 40 degrees C using guanidine thiocyanate concentrations of 1.5-1.7 M. In further experiments, we showed that a perfectly matched PNA allows the detection of a single-stranded DNA at a sensitivity of less than 1% in a background of single-stranded DNA having a single C to T point mutation in the region complementary to the PNA. Consequently, covalently bound PNAs provide a stable and reproducible environment for the development of mutation-specific DNA analysis assays.     

Surface density dependence of PCR amplicon hybridization on PNA/DNA probe layers

Surface plasmon field-enhanced fluorescence spectroscopy was employed to extensively investigate the hybridization behaviors of polymerase chain reaction (PCR) amplicons on a peptide nucleic acid (PNA) or DNA probe layer that was previously attached on a streptavidin-modified gold surface via biotin/streptavidin interaction. Despite the neutral backbone of PNA, the hybridization reactions were strongly influenced by the variation of ionic strength. The association rates exhibited a monotonic decrease with ionic strength increase and the maximum hybridization signal was achieved at an intermediate sodium concentration (approximately 100 mM). These effects were mainly ascribed to the electrostatic cross talk among the hybridized DNA molecules and the secondary structure of PCR amplicons. For the negatively charged DNA probes, the hybridization reaction was subjected additionally to the DNA/DNA electrostatic barrier, particularly in lower ionic strength range (e.g., 10 approximately 150 mM Na(+)). The electrostatic cross talk was shown to be largely reduced if the PNA probe layer was sufficiently diluted by following a strategic templated immobilization method. As a consequence, a pseudo-first-order kinetic model was applicable to describe the hybridization kinetics, and affinity constants were derived for evaluating the influence of single nucleotide polymorphisms (SNPs).     

Electrospray ionisation-cleavable tandem nucleic acid mass tag–peptide nucleic acid conjugates: synthesis and applications to quantitative genomic analysis using electrospray ionisation-MS/MS

The synthesis and characterization of isotopomer tandem nucleic acid mass tag–peptide nucleic acid (TNT–PNA) conjugates is described along with their use as electrospray ionisation-cleavable (ESI-Cleavable) hybridization probes for the detection and quantification of target DNA sequences by electrospray ionisation tandem mass spectrometry (ESI-MS/MS). ESI-cleavable peptide TNT isotopomers were introduced into PNA oligonucleotide sequences in a total synthesis approach. These conjugates were evaluated as hybridization probes for the detection and quantification of immobilized synthetic target DNAs using ESI-MS/MS. In these experiments, the PNA portion of the conjugate acts as a hybridization probe, whereas the peptide TNT is released in a collision-based process during the ionization of the probe conjugate in the electrospray ion source. The cleaved TNT acts as a uniquely resolvable marker to identify and quantify a unique target DNA sequence. The method should be applicable to a wide variety of assays requiring highly multiplexed, quantitative DNA/RNA analysis, including gene expression monitoring, genetic profiling and the detection of pathogens.     

Mismatching base-pair dependence of the kinetics of DNA-DNA hybridization studied by surface plasmon fluorescence spectroscopy

Two single-stranded DNAs consisting of complementary base pairs except for one mismatching base pair (MM1) can form double-stranded DNA by molecular recognition. This type of duplex is not as stable as that formed by MM0. In order to add to a better understanding of the physical mechanism of the hybridization and dissociation processes at sensor (chip) surfaces, we studied the kinetics of the MM1 hybridization by surface plasmon fluorescence spectroscopy. Target DNA strands labelled with a fluorescent molecule Cy5 at the 5′ end and hybridizing with the surface-attached probe DNA can be excited by the strong optical field of a surface plasmon resonance mode. The emitted fluorescence can be detected with high sensitivity. The affinity of a duplex was found to depend on the chemical nature, i.e. G–G, G–T etc., and on the position of the mismatching base pair along the 15mer duplex.     

Hybridization of complementary and homologous peptide nucleic acid oligomers to a guanine quadruplex-forming RNA

Peptide nucleic acid (PNA) oligomers targeted to guanine quadruplex-forming RNAs can be designed in two different ways. First, complementary cytosine-rich PNAs can hybridize by the formation of Watson-Crick base pairs, resulting in hybrid PNA-RNA duplexes. Second, guanine-rich homologous PNAs can hybridize by the formation of G tetrads, resulting in hybrid PNA-RNA quadruplexes. UV thermal denaturation, circular dichroism, and fluorescence spectroscopy experiments were used to compare these two recognition modes and revealed 1:1 duplex formation for the complementary PNA and 2:1 (PNA2-RNA) quadruplex formation for the homologous PNA. Both hybrids were very stable, and hybridization was observed at low nanomolar concentrations. Hybrid quadruplex formation was equally efficient regardless of the PNA strand polarity, indicating a lack of interaction between the loop nucleobases on the PNA and RNA strands. The implications of this finding on sequence specificity as well as methods to improve affinity are also discussed.     

Peptide nucleic acids: deoxyribonucleic acid mimics with a peptide backbone

This tutorial briefly describes a new class of synthetic biopolymer, which is referred to as peptide nucleic acid (PNA). In PNA, individual nucleobases are linked to an achiral neutral peptide backbone. PNA exhibits the hybridization characteristic (e.g., Watson—Crick duplex formation) of DNA. The achiral peptide backbone provides similar interbase distances as natural DNA, and adequate flexibility to permit base pair interactions with complementary RNA or DNA strands. Several potential applications of PNA oligomers in biotechnology are suggested. These include the use of PNAs as a probe for specific recognition of a DNA or RNA sequence selective, purification of nucleic acids via designed high affinity binding to PNA, screening for DNA mutations, and as possible therapeutic agents.     

A FRET-based assay for characterization of alternative splicing events using peptide nucleic acid fluorescence in situ hybridization

We describe a quantitative method for detecting RNA alternative splicing variants that combines in situ hybridization of fluorescently labeled peptide nucleic acid (PNA) probes with confocal microscopy Förster resonance energy transfer (FRET). The use of PNA probes complementary to sequences flanking a given splice junction allows to specifically quantify, within the cell, the RNA isoform generating such splice junction by FRET measure. As a proof of concept we analyzed two alternative splicing events originating from lymphocyte antigen 6 (LY6) complex, locus G5B (LY6G5B) pre-mRNA. These are characterized by the removal of the first intron (Fully Spliced Isoform, FSI) or by retention of such intron (Intron-Retained Isoform, IRI). The use of PNA probe pairs labeled with donor (Cy3) and acceptor (Cy5) fluorophores, suitable to FRET, flanking FSI and IRI specific splice junctions specifically detected both mRNA isoforms in HeLa cells. We have observed that the method works efficiently with probes 5–11 nt apart. The data supports that this FRET-based PNA fluorescence in situ hybridization (FP–FISH) method offers a conceptually new approach for characterizing at the subcellular level not only splice variant isoform structure, location and dynamics but also potentially a wide variety of close range RNA–RNA interactions.     

A homogeneous nucleic acid hybridization assay based on strand displacement.

A homogeneous nucleic acid hybridization assay which is conducted in solution and requires no separation steps is described. The assay is based on the concept of strand displacement. In the strand displacement assay, an RNA "signal strand" is hybridized within a larger DNA strand termed the "probe strand", which is, in turn, complementary to the target nucleic acid of interest. Hybridization of the target nucleic acid with the probe strand ultimately results in displacement of the RNA signal strand. Strand displacement, therefore, causes conversion of the RNA from double to single-stranded form. The single-strand specificity of polynucleotide phosphorylase (EC 2.7.7.8) allows discrimination between double-helical and single-stranded forms of the RNA signal strand. As displacement proceeds, free RNA signal strands are preferentially phosphorolyzed to component nucleoside diphosphates, including adenosine diphosphate. The latter nucleotide is converted to ATP by pyruvate kinase(EC 2.7.1.40). Luciferase catalyzed bioluminescence is employed to measure the ATP generated as a result of strand displacement.     

Rapid detection, identification, and enumeration of Escherichia coli by fluorescence in situ hybridization using an array scanner

A new fluorescence in situ hybridization (FISH) method using peptide nucleic acid (PNA) probes and an array scanner for rapid detection, identification, and enumeration of Escherichia coli is described. The test utilizes Cy3-labeled peptide nucleic acid (PNA) probes complementary to a specific 16S rRNA sequence of E. coli. Samples were filtered and incubated for 5 h, the membrane filters were then analyzed by fluorescence in situ hybridization and results were visualized with an array scanner. Results were provided as fluorescent spots representing E. coli microcolonies on the membrane filter surface. The number of fluorescent spots correlated to standard colony counts up to 100 colony-forming units per membrane filter. Above this level, better accuracy was obtained with PNA FISH due to the ability of the scanner to resolve neighboring microcolonies, which were not distinguishable as individual colonies once they were visible by eye.     

Electrochemical detection of short sequences of hepatitis C 3a virus using a peptide nucleic acid-assembled gold electrode

Development of an electrochemical DNA biosensor, using a gold electrode modified with a self-assembled monolayer composed of a peptide nucleic acid (PNA) probe and 6-mercapto-1-hexanol, is described. The sensor relies on covalent attachment of the14-mer PNA probe related to the hepatitis C virus genotype 3a (pHCV3a) core/E1 region on the electrode. Covalently self-assembled PNA could selectively hybridize with a complementary sequence in solution to form double-stranded PNA-DNA on the surface. The increase of peak current of methylene blue (MB), upon hybridization of the self-assembled probe with the target DNA in the solution, was observed and used to detect the target DNA sequence. Some hybridization experiments with noncomplementary oligonucleotides were carried out to assess whether the suggested DNA sensor responds selectively to the target. Diagnostic performance of the biosensor is described and the detection limit was found to be 5.7 × 10⁻¹¹ M with a relative standard deviation of 1.4% in phosphate buffer solution, pH 7.0. This sensor exhibits high reproducibility and could be used for detection of the target DNA for seven times after the regeneration process.     

Investigating oligonucleotide hybridization at subnanomolar level by surface plasmon resonance biosensor method

We have optimized surface plasmon resonance (SPR) biosensor technology for a rapid, direct, and low-consumption label-free multianalyte screening of synthetic oligonucleotides (ONs) with modified internucleotide linkages potentially applicable in antisense therapy. Monitoring of the ONs hybridization is based on the formation of complex between the natural oligonucleotide probe immobilized on the sensor surface and the ON in solution in contact with the sensor surface. An immobilization chemistry utilizing the streptavidin-biotin interaction was employed to obtain desired ligand density and high hybridization efficiency. It was demonstrated that the sensor is capable of detecting complementary 23-mer ONs in concentrations as low as 0.1 nM with high specificity and reproducibility.