Multicellular Tumor Spheroids for Evaluation of Cytotoxicity and Tumor Growth Inhibitory Effects of Nanomedicines In Vitro: A Comparison of Docetaxel-Loaded Block Copolymer Micelles and Taxotere?

While 3-D tissue models have received increasing attention over the past several decades in the development of traditional anti-cancer therapies, their potential application for the evaluation of advanced drug delivery systems such as nanomedicines has been largely overlooked. In particular, new insight into drug resistance associated with the 3-D tumor microenvironment has called into question the validity of 2-D models for prediction of in vivo anti-tumor activity. In this work, a series of complementary assays was established for evaluating the in vitro efficacy of docetaxel (DTX) -loaded block copolymer micelles (BCM+DTX) and Taxotere® in 3-D multicellular tumor spheroid (MCTS) cultures. Spheroids were found to be significantly more resistant to treatment than monolayer cultures in a cell line dependent manner. Limitations in treatment efficacy were attributed to mechanisms of resistance associated with properties of the spheroid microenvironment. DTX-loaded micelles demonstrated greater therapeutic effect in both monolayer and spheroid cultures in comparison to Taxotere®. Overall, this work demonstrates the use of spheroids as a viable platform for the evaluation of nanomedicines in conditions which more closely reflect the in vivo tumor microenvironment relative to traditional monolayer cultures. By adaptation of traditional cell-based assays, spheroids have the potential to serve as intermediaries between traditional in vitro and in vivo models for high-throughput assessment of therapeutic candidates.     

Biomaterials-assisted spheroid engineering for regenerative therapy

Cell-based therapy is a promising approach in the field of regenerative medicine. As cells are formed into spheroids, their survival, functions, and engraftment in the transplanted site are significantly improved compared to single cell transplantation. To improve the therapeutic effect of cell spheroids even further, various biomaterials (e.g., nano- or microparticles, fibers, and hydrogels) have been developed for spheroid engineering. These biomaterials not only can control the overall spheroid formation (e.g., size, shape, aggregation speed, and degree of compaction), but also can regulate cell-to-cell and cell-to-matrix interactions in spheroids. Therefore, cell spheroids in synergy with biomaterials have recently emerged for cell-based regenerative therapy. Biomaterials-assisted spheroid engineering has been extensively studied for regeneration of bone or/and cartilage defects, critical limb ischemia, and myocardial infarction. Furthermore, it has been expanded to pancreas islets and hair follicle transplantation. This paper comprehensively reviews biomaterials-assisted spheroid engineering for regenerative therapy.     

Repair of a Critical-sized Calvarial Defect Model Using Adipose-derived Stromal Cells Harvested from Lipoaspirate

Craniofacial skeletal repair and regeneration offers the promise of de novo tissue formation through a cell-based approach utilizing stem cells. Adipose-derived stromal cells (ASCs) have proven to be an abundant source of multipotent stem cells capable of undergoing osteogenic, chondrogenic, adipogenic, and myogenic differentiation. Many studies have explored the osteogenic potential of these cells in vivo with the use of various scaffolding biomaterials for cellular delivery. It has been demonstrated that by utilizing an osteoconductive, hydroxyapatite-coated poly(lactic-co-glycolic acid) (HA-PLGA) scaffold seeded with ASCs, a critical-sized calvarial defect, a defect that is defined by its inability to undergo spontaneous healing over the lifetime of the animal, can be effectively show robust osseous regeneration. This in vivo model demonstrates the basis of translational approaches aimed to regenerate the bone tissue - the cellular component and biological matrix. This method serves as a model for the ultimate clinical application of a progenitor cell towards the repair of a specific tissue defect.     

Infection and tissue engineering in segmental bone defects--a mini review

As tissue engineering becomes more of a clinical reality through the ongoing bench to bedside transition, research in this field must focus on addressing relevant clinical situations. Although most in vivo work in the area of bone tissue engineering focuses on bone regeneration within sterile, surgically created defects, there is a growing need for the investigation of bone tissue engineering approaches within contaminated or scarred wound beds, such as those that may be encountered following traumatic injury or during delayed reconstruction/regeneration. Significant work has been performed in the area of local drug delivery via biomaterial carriers, but there is little intersection in the available literature between antibiotic delivery and tissue regeneration. In this review, we examine recent advances in segmental bone defect animal models, bone tissue engineering, and drug delivery with the goal of identifying promising approaches and areas needing further investigation towards developing both a better understanding of and new tissue engineering approaches for addressing infection control while simultaneously initiating bone regeneration.     

Engineering Lipid Vesicles of Enhanced Intratumoral Transport Capabilities: Correlating Liposome Characteristics with Penetration into Human Prostate Tumor Spheroids

Liposomes have been widely used delivery systems, particularly relevant to the development of cancer therapeutics. Numerous liposome-based drugs are in the clinic or in clinical trials today against multiple tumor types; however, systematic studies of liposome interactions with solid or metastatic tumor nodules are scarce. This study is describing the in vitro interaction between liposomes and avascular human prostate (LNCaP-LN3) tumor spheroids. The ability of fluorescently labelled liposomal delivery systems of varying physicochemical characteristics to penetrate within multicellular tumor spheroids has been investigated by confocal laser scanning microscopy. A variety of liposome characteristics and experimental parameters were investigated, including lipid bilayer composition, duration of liposome-spheroid interaction, mean liposome size, steric stabilization of liposomes. Electrostatic binding between cationic liposomes and spheroids was very efficient; however, it impeded any significant penetration of the vesicles within deeper layers of the tumor spheroid. Small unilamellar liposomes of neutral surface character did not bind as efficiently but exhibited enhanced penetrative transport capabilities closer to the tumor core. Polymer-coated (sterically stabilised) liposomes exhibited almost no interaction with the spheroid, indicating that their limited diffusion within avascular tissues may be a limiting step for their use against micrometastases. Multicellular tumor spheroids were used as models of solid tumor interstitium relevant to delivery systems able to extravasate from the microcapillaries or as models of prevascularized micrometastases. This study illustrates that interactions between liposomes and other drug delivery systems with multicellular tumor spheroids can offer critically important information with respect to optimizing solid or micrometastatic tumor delivery and targeting strategies.     

Engineering lipid vesicles of enhanced intratumoral transport capabilities: correlating liposome characteristics with penetration into human prostate tumor spheroids

Liposomes have been widely used delivery systems, particularly relevant to the development of cancer therapeutics. Numerous liposome-based drugs are in the clinic or in clinical trials today against multiple tumor types; however, systematic studies of liposome interactions with solid or metastatic tumor nodules are scarce. This study is describing the in vitro interaction between liposomes and avascular human prostate (LNCaP-LN3) tumor spheroids. The ability of fluorescently labelled liposomal delivery systems of varying physicochemical characteristics to penetrate within multicellular tumor spheroids has been investigated by confocal laser scanning microscopy. A variety of liposome characteristics and experimental parameters were investigated, including lipid bilayer composition, duration of liposome-spheroid interaction, mean liposome size, steric stabilization of liposomes. Electrostatic binding between cationic liposomes and spheroids was very efficient; however, it impeded any significant penetration of the vesicles within deeper layers of the tumor spheroid. Small unilamellar liposomes of neutral surface character did not bind as efficiently but exhibited enhanced penetrative transport capabilities closer to the tumor core. Polymer-coated (sterically stabilised) liposomes exhibited almost no interaction with the spheroid, indicating that their limited diffusion within avascular tissues may be a limiting step for their use against micrometastases. Multicellular tumor spheroids were used as models of solid tumor interstitium relevant to delivery systems able to extravasate from the microcapillaries or as models of prevascularized micrometastases. This study illustrates that interactions between liposomes and other drug delivery systems with multicellular tumor spheroids can offer critically important information with respect to optimizing solid or micrometastatic tumor delivery and targeting strategies.     

Comprehension of ECM-Cell dynamics: A prerequisite for tissue regeneration

Tissue regeneration and cell therapy have an enormous potential in healthcare through the creation of artificial human tissues and organs. The possibility of producing functional replica of tissues and organs can offer a common, solitary solution for various kinds of inflictions. It can also provide an ultimate test model for drug discovery. There exists convincing evidence that if cells are cultured in extra-cellular matrix (ECM) mimicking 3D scaffolds infused with tissue-specific biochemical cues they grow and differentiate to express functionality. However, comprehensive understanding of ECM and its dynamic relation with the growing cells is vital for creating functional tissue models ex vivo. Different medical and non-medical groups all over the world are working towards achieving affordable, user friendly and technically viable solutions for improving our understanding of Cell-ECM dynamics for tissue engineering (TE). Successful TE, an ambitious goal that includes tissue neogenesis in vitro and functional tissue mending (regenerative medicine) in vivo, however involves innumerable challenges. Present review discusses some of the major technical hurdles that hinder the pace of progress in tissue regeneration/engineering (TE).     

Treatment of long bone defects and non-unions: from research to clinical practice

The treatment of long bone defects and non-unions is still a major clinical and socio-economical problem. In addition to the non-operative therapeutic options, such as the application of various forms of electricity, extracorporeal shock wave therapy and ultrasound therapy, which are still in clinical use, several operative treatment methods are available. No consensus guidelines are available and the treatments of such defects differ greatly. Therefore, clinicians and researchers are presently investigating ways to treat large bone defects based on tissue engineering approaches. Tissue engineering strategies for bone regeneration seem to be a promising option in regenerative medicine. Several in vitro and in vivo studies in small and large animal models have been conducted to establish the efficiency of various tissue engineering approaches. Neverthelsss, the literature still lacks controlled studies that compare the different clinical treatment strategies currently in use. However, based on the results obtained so far in diverse animal studies, bone tissue engineering approaches need further validation in more clinically relevant animal models and in clinical pilot studies for the translation of bone tissue engineering approaches into clinical practice.     

Formation and characterization of three dimensional human hepatocyte cell line spheroids on chitosan matrix for in vitro tissue engineering applications

Chitosan was used as a matrix to induce three-dimensional spheroids of HepG2 cells. Chitosan films were prepared and used for culturing Hep G2 cells. Attachment kinetics of the cells was studied on the chitosan films. The optimum seeding density of the Hep G2 cells, required for three-dimensional spheroid formation was determined and was found to be 5 × 10⁴/ml. The growth kinetics of Hep G2 cells was studied using (3-(4, 5-Dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) (MTT) assay, and morphology of the cells was studied through optical photographs taken at various days of culture. The liver cell functions of the spheroids were determined by measuring albumin and urea secretions. The results obtained from these studies have shown that the culture of Hep G2 cells on chitosan matrix taking appropriate seeding density resulted in the formation of three-dimensional spheroids and exhibited higher amount of albumin and urea synthesis compared to monolayer culture. These miniature “liver tissue like” models can be used for in vitro tissue engineering applications like preliminary evaluation of the toxicity of drugs and chemicals.     

Dynamics of spheroid self-assembly in liquid-overlay culture of DU 145 human prostate cancer cells.

The in vitro self-assembly of multicellular spheroids generates highly organized structures in which the three-dimensional structure and differentiated function frequently mimic that of in vivo tissues. This has led to their use in such diverse applications as tissue regeneration and drug therapy. Using Smoluchowski-like rate equations, herein we present a model of the self-aggregation of DU 145 human prostate carcinoma cells in liquid-overlay culture to elucidate some of the physical parameters affecting homotypic aggregation in attachment-dependent cells. Experimental results indicate that self-aggregation in our system is divided into three distinct phases: a transient reorganization of initial cell clusters, an active aggregation characterized by constant rate coefficients, and a ripening phase of established spheroid growth. In contrast to the diffusion-controlled aggregation previously observed for attachment-independent cells, the model suggests that active aggregation in our system is reaction-controlled. The rate equations accurately predict the aggregation kinetics of spheroids containing up to 30 cells and are dominated by spheroid adhesive potential with lesser contributions from the radius of influence. The adhesion probability increases with spheroid size so that spheroid-spheroid adhesions are a minimum of 2.5 times more likely than those of cell-cell, possibly due to the upregulation of extracellular matrix proteins and cell-adhesion molecules. The radius of influence is at least 1.5 to 3 times greater than expected for spherical geometry as a result of ellipsoidal shape and possible chemotactic or Fr?hlich interactions. Brownian-type behavior was noted for spheroids larger than 30 microm in diameter, but smaller aggregates were more motile by as much as a factor of 10 for single cells. The model may improve spheroid fidelity for existing applications of spheroids and form the basis of a simple assay for quantitatively evaluating cellular metastatic potential as well as therapies that seek to alter this potential.     

Activity-based bioluminescence probes for in vivo sensing applications

Bioluminescence imaging is a highly sensitive technique commonly used for various in vivo applications. Recent efforts to expand the utility of this modality have led to the development of a suite of activity-based sensing (ABS) probes for bioluminescence imaging by ‘caging’ of luciferin and its structural analogs. The ability to selectively detect a given biomarker has presented researchers with many exciting opportunities to study both health and disease states in animal models. Here, we highlight recent (2021–2023) bioluminescence-based ABS probes with an emphasis on probe design and in vivo validation experiments.     

Biomechanics and mechanobiology in functional tissue engineering

The field of tissue engineering continues to expand and mature, and several products are now in clinical use, with numerous other preclinical and clinical studies underway. However, specific challenges still remain in the repair or regeneration of tissues that serve a predominantly biomechanical function. Furthermore, it is now clear that mechanobiological interactions between cells and scaffolds can critically influence cell behavior, even in tissues and organs that do not serve an overt biomechanical role. Over the past decade, the field of “functional tissue engineering” has grown as a subfield of tissue engineering to address the challenges and questions on the role of biomechanics and mechanobiology in tissue engineering. Originally posed as a set of principles and guidelines for engineering of load-bearing tissues, functional tissue engineering has grown to encompass several related areas that have proven to have important implications for tissue repair and regeneration. These topics include measurement and modeling of the in vivo biomechanical environment; quantitative analysis of the mechanical properties of native tissues, scaffolds, and repair tissues; development of rationale criteria for the design and assessment of engineered tissues; investigation of the effects biomechanical factors on native and repair tissues, in vivo and in vitro; and development and application of computational models of tissue growth and remodeling. Here we further expand this paradigm and provide examples of the numerous advances in the field over the past decade. Consideration of these principles in the design process will hopefully improve the safety, efficacy, and overall success of engineered tissue replacements.     

Recent advances in three-dimensional multicellular spheroid culture for biomedical research

Many types of mammalian cells can aggregate and differentiate into 3-D multicellular spheroids when cultured in suspension or a nonadhesive environment. Compared to conventional monolayer cultures, multicellular spheroids resemble real tissues better in terms of structural and functional properties. Multicellular spheroids formed by transformed cells are widely used as avascular tumor models for metastasis and invasion research and for therapeutic screening. Many primary or progenitor cells on the other hand, show significantly enhanced viability and functional performance when grown as spheroids. Multicellular spheroids in this aspect are ideal building units for tissue reconstruction. Here we review the current understanding of multicellular spheroid formation mechanisms, their biomedical applications, and recent advances in spheroid culture, manipulation, and analysis techniques.     

Imaging herpes simplex virus type 1 amplicon vector-mediated gene expression in human glioma spheroids

Vectors derived from herpes simplex virus type 1 (HSV-1) have great potential for transducing therapeutic genes into the central nervous system; however, inefficient distribution of vector particles in vivo may limit their therapeutic potential in patients with gliomas. This study was performed to investigate the extent of HSV-1 amplicon vector-mediated gene expression in a three-dimensional glioma model of multicellular spheroids by imaging highly infectious HSV-1 virions expressing green fluorescent protein (HSV-GFP). After infection or microscopy-guided vector injection of glioma spheroids at various spheroid sizes, injection pressures and injection times, the extent of HSV-1 vector-mediated gene expression was investigated via laser scanning microscopy. Infection of spheroids with HSV-GFP demonstrated a maximal depth of vector-mediated GFP expression at 70 to 80 μm. A > 80% transduction efficiency was reached only in small spheroids with a diameter of < 150 μm. Guided vector injection into the spheroids showed transduction efficiencies ranging between < 10 and > 90%. The results demonstrated that vector-mediated gene expression in glioma spheroids was strongly dependent on the mode of vector application-injection pressure and injection time being the most important parameters. The assessment of these vector application parameters in tissue models will contribute to the development of safe and efficient gene therapy protocols for clinical application.     

The role of actin filaments and microtubules in hepatocyte spheroid self-assembly

Cultured rat hepatocytes self-assemble into three-dimensional structures or spheroids that exhibit ultrastructural characteristics of native hepatic tissue and enhanced liver-specific functions. The spheroid formation process involves cell translocation and changes in cell shape, indicative of the reorganization of the cytoskeletal elements. To elucidate the function of the cytoskeleton, hepatocytes undergoing spheroid formation were treated with drugs that disrupt the different cytoskeletal components. Cytochalasin D, which targets the actin filaments, caused inhibition of spheroid formation. The role of microtubules in this process was assessed by incubating the cells with taxol or nocodazole. Perturbation of microtubules had minimal effects on spheroid assembly. Scanning electron micrographs showed no morphological differences between spheroids formed in control cultures and those formed in the presence of taxol or nocodazole. In addition, the effects of those agents on hepatocyte functions were investigated. Albumin secretion and cytochrome P450 2B1/2 activities of hepatocytes were comparable in spheroids formed in the presence of taxol or nocodazole to those formed in control cultures. The levels of these liver-specific activities were lower in cytochalasin D--treated cultures where only dispersed cells or cell clumps were found but spheroids had not found. Thus, hepatocytes require an intact actin network to self-assemble efficiently into functional tissue-like structures. Perturbation of the microtubule lattice does not impair the formation process. Events that transpire during hepatocyte spheroid self-assembly exhibit striking similarities to processes commonly observed in tissue morphogenesis. The results provide insight into the mechanisms that cells employ to organize into tissues and can contribute to our understanding of how to control the cellular assembly in tissue engineering and clinical applications.     

Robotic Production of Cancer Cell Spheroids with an Aqueous Two-phase System for Drug Testing

Cancer cell spheroids present a relevant in vitro model of avascular tumors for anti-cancer drug testing applications. A detailed protocol for producing both mono-culture and co-culture spheroids in a high throughput 96-well plate format is described in this work. This approach utilizes an aqueous two-phase system to confine cells into a drop of the denser aqueous phase immersed within the second aqueous phase. The drop rests on the well surface and keeps cells in close proximity to form a single spheroid. This technology has been adapted to a robotic liquid handler to produce size-controlled spheroids and expedite the process of spheroid production for compound screening applications. Spheroids treated with a clinically-used drug show reduced cell viability with increase in the drug dose. The use of a standard micro-well plate for spheroid generation makes it straightforward to analyze viability of cancer cells of drug-treated spheroids with a micro-plate reader. This technology is straightforward to implement both robotically and with other liquid handling tools such as manual pipettes.     

Engineering cell alignment in vitro

Cell alignment plays a critical role in various cell behaviors including cytoskeleton reorganization, membrane protein relocation, nucleus gene expression, and ECM remodeling. Cell alignment is also known to exert significant effects on tissue regeneration (e.g., neuron) and modulate mechanical properties of tissues including skeleton, cardiac muscle and tendon. Therefore, it is essential to engineer cell alignment in vitro for biomechanics, cell biology, tissue engineering and regenerative medicine applications. With advances in nano- and micro-scale technologies, a variety of approaches have been developed to engineer cell alignment in vitro, including mechanical loading, topographical patterning, and surface chemical treatment. In this review, we first present alignments of various cell types and their functionality in different tissues in vivo including muscle and nerve tissues. Then, we provide an overview of recent approaches for engineering cell alignment in vitro. Finally, concluding remarks and perspectives are addressed for future improvement of engineering cell alignment.     

Long-term enhancement of cytochrome P450 2B1/2 expression in rat hepatocyte spheroids through adenovirus-mediated gene transfer

Tissue-like structures of cells organized in vitrohave a great potential for a number of clinical and biomedical applications. Cell functions may be modulated with gene delivery, improving the characteristics of these structures. Hepatocytes that self-assemble into spheroids can be transduced through adenovirus-mediated gene transfer. An adenoviral vector (AdGFP) was employed to deliver a gene encoding for green fluorescent protein (GFP) in rat hepatocyte spheroids. GFP fluorescence was detected for at least one month. Furthermore, the rat cytochrome P450 2B1 gene (CYP2B1) was transferred through infection with a recombinant adenovirus (AdCYP2B1) in hepatocyte spheroids cultured in suspension. The CYP2B1/2 mRNA and apoprotein levels were continuously higher for over 23 days compared to phenobarbital-induced and control cultures. P450-catalyzed pentoxyresorufin-O-dealkylation activity was also high in the AdCYP2B1-infected spheroids. In these spheroid cultures, albumin and urea levels were similar to those in uninfected spheroid cultures, indicating that expression of the CYP2B1transgene did not impair these liver-specific functions. Hepatocyte spheroids transduced by recombinant adenoviral vectors can be efficiently used for drug metabolism studies, in implantation, and in bioartificial liver devices. This revised version was published online in August 2006 with corrections to the Cover Date.     

Cultured human nasal epithelial multicellular spheroids: polar cyst-like model tissues

We report here a new readily cultured nonadherent hollow spheroidal epithelial tissue model: human nasal epithelial multicellular spheroids, prepared from brushings of human nasal epithelium in vivo. Although cultured cyst-like epithelial models developed from embryonic, transformed, or polypoid tissues have been reported previously, human nasal epithelial multicellular spheroids are derived from normal mature nontransformed human airway epithelial cells. In our studies, spheroids ranged in size from 50 to 700 microns diameter (averaging approximately 250 microns). Cells of the spheroid displayed morphological polarity and formed junctional complexes. Transcellular electrolyte transport may underlie the increase in spheroid size which occurred in culture. The ease and simplicity of the brushing and culture procedures reported here render normal and diseased human cell populations more readily accessible to investigation. We believe human nasal epithelial multicellular spheroids may have important applications in the study of electrolyte and fluid transport processes, ciliary motility, epithelial polarity, cellular metabolism, and drug cytotoxicity in normal and pathophysiological states of the human respiratory tract (e.g., cystic fibrosis).