A one-step miniprep for the isolation of plasmid DNA and lambda phage particles

Plasmid DNA minipreps are fundamental techniques in molecular biology. Current plasmid DNA minipreps use alkali and the anionic detergent SDS in a three-solution format. In addition, alkali minipreps usually require additional column-based purification steps and cannot isolate other extra-chromosomal elements, such as bacteriophages. Non-ionic detergents (NIDs) have been used occasionally as components of multiple-solution plasmid DNA minipreps, but a one-step approach has not been developed. Here, we have established a one-tube, one-solution NID plasmid DNA miniprep, and we show that this approach also isolates bacteriophage lambda particles. NID minipreps are more time-efficient than alkali minipreps, and NID plasmid DNA performs better than alkali DNA in many downstream applications. In fact, NID crude lysate DNA is sufficiently pure to be used in digestion and sequencing reactions. Microscopic analysis showed that the NID procedure fragments E. coli cells into small protoplast-like components, which may, at least in part, explain the effectiveness of this approach. This work demonstrates that one-step NID minipreps are a robust method to generate high quality plasmid DNA, and NID approaches can also isolate bacteriophage lambda particles, outperforming current standard alkali-based minipreps.     

A Novel Selection Marker for Efficient DNA Cloning and Recombineering in E. coli

Production of recombinant DNA in bacterial cells is an essential technique in molecular biology. Plasmids are usually maintained in an E. coli host by antibiotic selection. However, there are only a few antibiotic-resistance markers available in common use. Here we report the adoption of a novel selection marker, mfabI (mutant fabI) for plasmid propagation in E. coli. mfabI expands the limited repertoire of selection markers and allows for more efficient molecular manipulation and plasmid propagation in E. coli. We show that mfabI is not only an efficient plasmid selection marker, but it also possesses unique activity that may facilitate molecular manipulation of unstable sequences. Furthermore, we have incorporated mfabI in the recombineering tool kit for generating mouse gene targeting vectors and demonstrate the advantage of using mfabI-containing recombineering vectors.     

Flexprep: Scale-flexible rapid plasmid preparation for analysis of recombinant clones

A scale-flexible and cost-efective protocol for plasmid preparation is described to cover miniprep and midiprep scale work in a microcentriguge format for analysis of recombinant clones. this protocol relies on a modified alkaline lysis of Escherichia coli cells and subsequent purification of plasmid DNA with no organic extraction and alcohol precipitation. It can process up to 20 mL of E. coli cells carrying 3–10 kbp plasmid vectors in <10 min. Flexprep delivers sufficient yield and purity of plasmid DNA for routine applications including restriction enzyme digestion and fluorescent automated sequencing.     

Rapid and Efficient Protocols for Throughput Extraction of High Quality Plasmid DNA from Strains of Xanthomonas axonopodis pv malvacearum and Escherichia coli

Efficient protocols developed to isolate low copy plasmid DNA from Xanthomonas axonopodis pv malvacearum (Xam) and high copy recombinant plasmid DNA from Escherichia coli are described. The protocol for extraction of low copy plasmid DNA from strains of Xam yielded high concentrations of plasmid DNA and used easily available and inexpensive chemicals in simple steps. The protocol for plasmid extraction from E. coli was rapid, cost-effective and yet yielded high concentrations of plasmid DNA. The procedures are simple and can be used to process several samples at one time. The plasmid DNA extracted by two methods was sufficiently pure, free from protein and other cellular contaminants and amenable to various molecular manipulations.     

A simple bacterial transformation method using magnesium- and calcium-aminoclays

An efficient and user-friendly bacterial transformation method by simple spreading cells with aminoclays was demonstrated. Compared to the reported transformation approaches using DNA adsorption or wrapping onto (in)organic fibers, the spontaneously generated clay-coated DNA suprastructures by mixing DNA with aminoclay resulted in transformants in both Gram-negative (Escherichia coli) and Gram-positive cells (Streptococcus mutans). Notably, the wild type S. mutans showed comparable transformation efficiency to that of the E. coli host for recombinant DNA cloning. This is a potentially promising result because other trials such as heat-shock, electroporation, and treatment with sepiolite for introducing DNA into the wild type S. mutans failed. Under defined conditions, the transformation efficiency of E. coli XL1-Blue and S. mutans exhibited ~ 2 × 10⁵ and ~ 6 × 10³ CFU/μg of plasmid DNA using magnesium-aminoclay. In contrast, transformation efficiency was higher in S. mutans than that in E. coli XL1-Blue for calcium-aminoclay. It was also confirmed that each plasmid transformed into E. coli and S. mutans was stably maintained and that they expressed the inserted gene encoding the green fluorescent protein during prolonged growth of up to 80 generations.     

Surface-functionalized gold nanoparticles mediate bacterial transformation: a nanobiotechnological approach

Transformation of bacteria is an important step in molecular biology. Viral and non-virus-based gene delivery techniques, including chemical/biological and physical approaches, have been applied to bacterial, mammalian and plant cells. E. coli is not competent to take up DNA; hence, different methods are used to incorporate plasmid DNA. A novel method has been developed using glutathione-functionalized gold nanoparticles to mediate transformation of plasmid DNA (pUC19) into E. coli DH5α that does not require the preparation of competent cells. The glutathione-functionalized gold nanoparticles acted as a vector and facilitated the entry of DNA into the host cell. The method also gave a higher transformation efficiency (4.2 × 10⁷/μg DNA) compared to 2.3 × 10⁵/μg DNA using the conventional CaCl₂-mediated method. It was also non-toxic to the bacterium making it suitable for biotechnological applications.     

Improving microbial fitness in the mammalian gut by in vivo temporal functional metagenomics

Elucidating functions of commensal microbial genes in the mammalian gut is challenging because many commensals are recalcitrant to laboratory cultivation and genetic manipulation. We present Temporal FUnctional Metagenomics sequencing (TFUMseq), a platform to functionally mine bacterial genomes for genes that contribute to fitness of commensal bacteria in vivo. Our approach uses metagenomic DNA to construct large‐scale heterologous expression libraries that are tracked over time in vivo by deep sequencing and computational methods. To demonstrate our approach, we built a TFUMseq plasmid library using the gut commensal Bacteroides thetaiotaomicron (Bt) and introduced Escherichia coli carrying this library into germfree mice. Population dynamics of library clones revealed Bt genes conferring significant fitness advantages in E. coli over time, including carbohydrate utilization genes, with a Bt galactokinase central to early colonization, and subsequent dominance by a Bt glycoside hydrolase enabling sucrose metabolism coupled with co‐evolution of the plasmid library and E. coli genome driving increased galactose utilization. Our findings highlight the utility of functional metagenomics for engineering commensal bacteria with improved properties, including expanded colonization capabilities in vivo.     

Plasmid size can affect the ability of Escherichia coli to produce high-quality plasmids

Large molecular weight plasmids are often used in gene therapy and DNA vaccines. To investigate the effect of plasmid size on the performance of Escherichia coli host strains during plasmid preparation, we employed E. coli JM109 and TOP10 cells to prepare four plasmids ranging from 4.7 to 16.8?kb in size. Each plasmid was extracted from JM109 and TOP10 cells using an alkaline lysis mini-preparation method. However, when commercial kits were used to extract the same plasmids from JM109 cells, the large molecular weight plasmids substantially degraded, compared with their smaller counterparts. No degradation was observed when the four plasmids were extracted from E. coli TOP10 cells using the same commercial kit. We conclude, therefore, that the performance of E. coli in high quality plasmid preparations can be affected by plasmid size.     

Development of Primers to O-Antigen Biosynthesis Genes for Specific Detection of Escherichia coli O157 by PCR

The chemical composition of each O-antigen subunit in gram-negative bacteria is a reflection of the unique DNA sequences within each rfb operon. By characterizing DNA sequences contained with each rfb operon, a diagnostic serotype-specific probe to Escherichia coli O serotypes that are commonly associated with bacterial infections can be generated. Recently, from an E. coli O157:H7 cosmid library, O-antigen-positive cosmids were identified with O157-specific antisera. By using the cosmid DNAs as probes, several DNA fragments which were unique to E. coli O157 serotypes were identified by Southern analysis. Several of these DNA fragments were subcloned from O157-antigen-positive cosmids and served as DNA probes in Southern analysis. One DNA fragment within plasmid pDS306 which was specific for E. coli O157 serotypes was identified by Southern analysis. The DNA sequence for this plasmid revealed homology to two rfb genes, the first of which encodes a GDP-mannose dehydratase. These rfb genes were similar to O-antigen biosynthesis genes in Vibrio cholerae and Yersinia enterocolitica serotype O:8. An oligonucleotide primer pair was designed to amplify a 420-bp DNA fragment from E. coli O157 serotypes. The PCR test was specific for E. coli O157 serotypes. PCR detected as few as 10 cells with the O157-specific rfb oligonucleotide primers. Coupled with current enrichment protocols, O157 serotyping by PCR will provide a rapid, specific, and sensitive method for identifying E. coli O157.     

A rapid microscale technique for isolation of recombinant plasmid DNA suitable for restriction enzyme analysis

A simple and rapid microscale technique is described for the isolation of plasmid DNA which involves cell lysis with phenol, centrifugation, phenol extraction, ethanol precipitation, and RNase digestion. The plasmid DNA is of suitable purity and quantity for multiple restriction endonuclease digestions and bacterial transformations. This “miniprep” procedure is applicable for a variety of types of plasmids ranging in size from 2900 to 18,400 base pairs (bp) and for a number of Escherichia coli strains. The plasmids are rapidly cleaved by all restriction enzymes (total of 14) tested to date. Recombinant clones have been screened for insertions as small as 10 bp and as large as 5000 bp. The procedure takes ~3 h and has been routinely used to simultaneously analyze 24 candidate clones. This procedure is reliable and useful for rapid screening of recombinant DNA candidates where analysis by restriction endonuclease digestion is necessary.     

Comparative study of HOCl-inflicted damage to bacterial DNA ex vivo and within cells

The prospects for using bacterial DNA as an intrinsic probe for HOCl and secondary oxidants/chlorinating agents associated with it has been evaluated using both in vitro and in vivo studies. Single-strand and double-strand breaks occurred in bare plasmid DNA that had been exposed to high levels of HOCl, although these reactions were very inefficient compared to polynucleotide chain cleavage caused by the OH-generating reagent, peroxynitrite. Plasmid nicking was not increased when intact Escherichia coli were exposed to HOCl; rather, the amount of recoverable plasmid diminished in a dose-dependent manner. At concentration levels of HOCl exceeding lethal doses, genomic bacterial DNA underwent extensive fragmentation and the amount of precipitable DNA-protein complexes increased several-fold. The 5-chlorocytosine content of plasmid and genomic DNA isolated from HOCl-exposed E. coli was also slightly elevated above controls, as measured by mass spectrometry of the deaminated product, 5-chlorouracil. However, the yields were not dose-dependent over the bactericidal concentration range. Genomic DNA recovered from E. coli that had been subjected to phagocytosis by human neutrophils occasionally showed small increases in 5-chlorocytosine content when compared to analogous cellular reactions where myeloperoxidase activity was inhibited by azide ion. Overall, the amount of isolable 5-chlorouracil from the HOCl-exposed bacterial cells was far less than the damage manifested in polynucleotide bond cleavage and cross-linking.     

Pathogenomics of the Virulence Plasmids of Escherichia coli

Summary: Bacterial plasmids are self-replicating, extrachromosomal elements that are key agents of change in microbial populations. They promote the dissemination of a variety of traits, including virulence, enhanced fitness, resistance to antimicrobial agents, and metabolism of rare substances. Escherichia coli, perhaps the most studied of microorganisms, has been found to possess a variety of plasmid types. Included among these are plasmids associated with virulence. Several types of E. coli virulence plasmids exist, including those essential for the virulence of enterotoxigenic E. coli, enteroinvasive E. coli, enteropathogenic E. coli, enterohemorrhagic E. coli, enteroaggregative E. coli, and extraintestinal pathogenic E. coli. Despite their diversity, these plasmids belong to a few plasmid backbones that present themselves in a conserved and syntenic manner. Thanks to some recent research, including sequence analysis of several representative plasmid genomes and molecular pathogenesis studies, the evolution of these virulence plasmids and the implications of their acquisition by E. coli are now better understood and appreciated. Here, work involving each of the E. coli virulence plasmid types is summarized, with the available plasmid genomic sequences for several E. coli pathotypes being compared in an effort to understand the evolution of these plasmid types and define their core and accessory components.     

Transformation of Escherichia coli with DNA from Saccharomyces cerevisiae Cell Lysates

We developed a system to monitor the transfer of heterologous DNA from a genetically manipulated strain of Saccharomyces cerevisiae to Escherichia coli. This system is based on a yeast strain that carries multiple integrated copies of a pUC-derived plasmid. The bacterial sequences are maintained in the yeast genome by selectable markers for lactose utilization. Lysates of the yeast strain were used to transform E. coli. Transfer of DNA was measured by determining the number of ampicillin-resistant E. coli clones. Our results show that transmission of the Amp^r gene to E. coli by genetic transformation, caused by DNA released from the yeast, occurs at a very low frequency (about 50 transformants per μg of DNA) under optimal conditions (a highly competent host strain and a highly efficient transformation procedure). These results suggest that under natural conditions, spontaneous transmission of chromosomal genes from genetically modified organisms is likely to be rare.     

In Vivo Transmission of an IncA/C Plasmid in Escherichia coli Depends on Tetracycline Concentration,and Acquisition of the Plasmid Results in a Variable Cost of Fitness

IncA/C plasmids are broad-host-range plasmids enabling multidrug resistance that have emerged worldwide among bacterial pathogens of humans and animals. Although antibiotic usage is suspected to be a driving force in the emergence of such strains, few studies have examined the impact of different types of antibiotic administration on the selection of plasmid-containing multidrug resistant isolates. In this study, chlortetracycline treatment at different concentrations in pig feed was examined for its impact on selection and dissemination of an IncA/C plasmid introduced orally via a commensal Escherichia coli host. Continuous low-dose administration of chlortetracycline at 50 g per ton had no observable impact on the proportions of IncA/C plasmid-containing E. coli from pig feces over the course of 35 days. In contrast, high-dose administration of chlortetracycline at 350 g per ton significantly increased IncA/C plasmid-containing E. coli in pig feces (P < 0.001) and increased movement of the IncA/C plasmid to other indigenous E. coli hosts. There was no evidence of conjugal transfer of the IncA/C plasmid to bacterial species other than E. coli. In vitro competition assays demonstrated that bacterial host background substantially impacted the cost of IncA/C plasmid carriage in E. coli and Salmonella. In vitro transfer and selection experiments demonstrated that tetracycline at 32 μg/ml was necessary to enhance IncA/C plasmid conjugative transfer, while subinhibitory concentrations of tetracycline in vitro strongly selected for IncA/C plasmid-containing E. coli. Together, these experiments improve our knowledge on the impact of differing concentrations of tetracycline on the selection of IncA/C-type plasmids.     

Enhanced plasmid production in miniaturized high-cell-density cultures of Escherichia coli supported with perfluorinated oxygen carrier

A simple method for plasmid minipreps in closed 1.5 mL microcentrifuge tubes using a cultivation medium with internal substrate delivery (EnBase^®) in combination with a two-phase perfluorodecalin (PFD) system supplying additional oxygen to the E. coli culture is described. The procedure can simply be performed on a thermoshaker using only 50 μL cultivation volume. Twenty and twenty-five percent higher cell densities and plasmid concentration, respectively, were obtained with the additional oxygen delivery system when compared to cultures without PFD. Compared to standard 2 mL LB cultures ninefold higher cell densities and eightfold higher plasmid concentrations were achieved for the smaller culture volume. The μL-scale cultures can be directly utilized in further plasmid purification without any centrifugation step or the subsequent removal of the supernatant. This simplifies the routine procedure considerably. Furthermore, the new method is very robust considering the time of cultivation. Highest plasmid concentrations were already obtained after only 6 h of cultivation, but the plasmid concentration remained high (87 % of the maximum) even until 8 h of cultivation. Aside from the advantage of this method for the daily routine, we believe that it could also be applied to automated high-throughput processes.     

Restriction map of bacteriophage SP02: ordering the SacI fragments and identification of the DNA termini

A plasmid that is able to replicate in both Escherichia coli and Streptococcus sanguis has been constructed by the in vitro joining of the pACYC184 (Cm^r Tc^r) and pVA749 (Em^r) replicons. This plasmid, designated pVA838, is 9.2 kb in size and expresses Em^r in both E. coli and S. sanguis. Its Cm^r marker is expressed only in E. coli and may be inactivated by addition of DNA inserts at its internal EcoRI or PvuII sites. The pVA838 molecule also contains unique SalI, SphI, BamHI, NruI and XbaI cleavage sites suitable for molecular cloning. pVA838 may be amplified in E. coli but not in S. sanguis. We have used the pVA838 plasmid as a shuttle vector to clone streptococcai plasmid fragments in E. coli. Such chimeras isolated from E. coli were readily introduced into S. sanguis by transformation.     

Comparison of Methods of Extracting Salmonella enterica Serovar Enteritidis DNA from Environmental Substrates and Quantification of Organisms by Using a General Internal Procedural Control

This paper compares five commercially available DNA extraction methods with respect to DNA extraction efficiency of Salmonella enterica serovar Enteritidis from soil, manure, and compost and uses an Escherichia coli strain harboring a plasmid expressing green fluorescent protein as a general internal procedural control. Inclusion of this general internal procedural control permitted more accurate quantification of extraction and amplification of S. enterica serovar Enteritidis in these samples and reduced the possibility of false negatives. With this protocol it was found that the optimal extraction method differed for soil (Mobio soil DNA extraction kit), manure (Bio101 soil DNA extraction kit), and compost (Mobio fecal DNA extraction kit). With each method, as little as 1.2 × 10³ to 1.8 × 10³ CFU of added serovar Enteritidis per 100 mg of substrate could be detected by direct DNA extraction and subsequent S. enterica-specific TaqMan PCR. After bacterial enrichment, as little as 1 CFU/100 mg of original substrate was detected. Finally, the study presents a more accurate molecular analysis for quantification of serovar Enteritidis initially present in soil or manure using DNA extraction and TaqMan PCR.     

Evaluation of the efficiency and utility of recombinant enzyme-free seamless DNA cloning methods

Simple and low-cost recombinant enzyme-free seamless DNA cloning methods have recently become available. In vivo Escherichia coli cloning (iVEC) can directly transform a mixture of insert and vector DNA fragments into E. coli, which are ligated by endogenous homologous recombination activity in the cells. Seamless ligation cloning extract (SLiCE) cloning uses the endogenous recombination activity of E. coli cellular extracts in vitro to ligate insert and vector DNA fragments. An evaluation of the efficiency and utility of these methods is important in deciding the adoption of a seamless cloning method as a useful tool. In this study, both seamless cloning methods incorporated inserting DNA fragments into linearized DNA vectors through short (15–39 bp) end homology regions. However, colony formation was 30–60-fold higher with SLiCE cloning in end homology regions between 15 and 29 bp than with the iVEC method using DH5α competent cells. E. coli AQ3625 strains, which harbor a sbcA gene mutation that activates the RecE homologous recombination pathway, can be used to efficiently ligate insert and vector DNA fragments with short-end homology regions in vivo. Using AQ3625 competent cells in the iVEC method improved the rate of colony formation, but the efficiency and accuracy of SLiCE cloning were still higher. In addition, the efficiency of seamless cloning methods depends on the intrinsic competency of E. coli cells. The competency of chemically competent AQ3625 cells was lower than that of competent DH5α cells, in all cases of chemically competent cell preparations using the three different methods. Moreover, SLiCE cloning permits the use of both homemade and commercially available competent cells because it can use general E. coli recA^? strains such as DH5α as host cells for transformation. Therefore, between the two methods, SLiCE cloning provides both higher efficiency and better utility than the iVEC method for seamless DNA plasmid engineering.     

Evaluating the Membrane Fecal Coliform Test by Using Escherichia coli as the Indicator Organism

The fecal coliform membrane filter method (MFC) currently used in water pollution analysis was evaluated by using two strains of Escherichia coli, a known fecal coliform, as the indicator organism. A large relative error in the results obtained with this method was found to be dependent upon the brand of membrane filter employed, the medium, and the temperature of incubation. MFC densities varied between 10 and 60% of the densities determined by means of total bacteria counts and total coliform counts performed at 35 C. Due to the large relative error encountered, the MFC method cannot be recommended as an analytical tool for the laboratory enumeration of E. coli. The results do show that the MFC method can be used at 35 C for enumeration of E. coli and for differential counts of E. coli and Enterobacter aerogenes.