Crystal Structural Framework of Lithium Super‐Ionic Conductors

As technologically important materials for solid‐state batteries, Li super‐ionic conductors are a class of materials exhibiting exceptionally high ionic conductivity at room temperature. These materials have unique crystal structural frameworks hosting a highly conductive Li sublattice. However, it is not understood why certain crystal structures of the super‐ionic conductors lead to high conductivity in the Li sublattice. In this study, using topological analysis and ab initio molecular dynamics simulations, the crystal structures of all Li‐conducting oxides and sulfides are studied systematically and the key features pertaining to fast‐ion conduction are quantified. In particular, a unique feature of enlarged Li sites caused by large local spaces in the crystal structural framework is identified, promoting fast conduction in the Li‐ion sublattice. Based on these quantified features, the high‐throughput screening identifies many new structures as fast Li‐ion conductors, which are further confirmed by ab initio molecular dynamics simulations. This study provides new insights and a systematic quantitative understanding of the crystal structural frameworks of fast ion‐conductor materials and motivates future experimental and computational studies on new fast‐ion conductors.     

MXene‐Based Mesoporous Nanosheets Toward Superior Lithium Ion Conductors

Although solid polymer electrolytes have some intrinsic advantages in synthesis and film processing compared with inorganic solid electrolytes, low ionic conductivities and mechanical moduli hamper their practical applications in lithium‐based batteries. Here, an efficient strategy is developed to produce a unique solid polymer electrolyte containing MXene‐based mesoporous silica nanosheets with a sandwich structure, which are fabricated via controllable hydrolysis of tetraethyl orthosilicate around the surface of MXene‐Ti₃C₂ under the direction of cationic surfactants. Such unique nanosheets not only exhibit individual, thin, and insulated features, but also possess abundant functional groups in mesopores and on the surface, which are favorable for the formation of Lewis acid–base interactions with anions in polymer electrolytes such as poly(propylene oxide) elastomer, enabling the fast Li⁺ transportation at the mesoporous nanosheets/polymer interfaces. As a consequence, a solid polymer electrolyte with high ionic conductivity of 4.6 × 10^?4 S cm^?1, high Young's modulus of 10.5 MPa, and long‐term electrochemical stability is achieved.     

Ionomigration of Neutral Phases in Ionic Conductors

Without sensing any physical force, a neutral object in an ion conducting solid can move in a uniform electrochemical field by coupling a global ion wind with localized counterion diffusion at the interface. This happens to pores and gas bubbles at 840 °C in a fast O^2? conductor, yttria‐stabilized zirconia (YSZ), despite having cations that are essentially frozen with lattice diffusivities 10¹² times slower than the O^2? diffusivity. Through‐thickness migration and massive electro‐sintering in thin YSZ ceramics are observed at voltages similar to those in YSZ fuel cells and electrolysis cells. This effect should apply to any electrochemically‐loaded multiphase ionic conducting solid, with or without an electric field, and can lead to electrolyte sintering, phase accumulation and electrode debonding, resulting in unexpected benefit or damage in electrochemical devices. As the velocity obeys a pseudo Stokes‐Einstein equation, inversely proportional to the object size, an especially enhanced size effect is expected in nanocomposites.     

Computation‐Guided Design of LiTaSiO5, a New Lithium Ionic Conductor with Sphene Structure

The development of all‐solid‐state Li‐ion batteries requires solid electrolyte materials with many desired properties, such as ionic conductivity, chemical and electrochemical stability, and mechanical durability. Computation‐guided materials design techniques are advantageous in designing and identifying new solid electrolytes that can simultaneously meet these requirements. In this joint computational and experimental study, a new family of fast lithium ion conductors, namely, LiTaSiO₅ with sphene structure, are successfully identified, synthesized, and demonstrated using a novel computational design strategy. First‐principles computation predicts that Zr‐doped LiTaSiO₅ sphene materials have fast Li diffusion, good phase stability, and poor electronic conductivity, which are ideal for solid electrolytes. Experiments confirm that Zr‐doped LiTaSiO₅ sphene structure indeed exhibits encouraging ionic conductivity. The lithium diffusion mechanisms in this material are also investigated, indicating the sphene materials are 3D conductors with facile 1D diffusion along the [101] direction and additional cross‐channel migration. This study demonstrates a novel design strategy of activating fast Li ionic diffusion in lithium sphenes, a new materials family of superionic conductors.     

Building Lithiophilic Ion‐Conduction Highways on Garnet‐Type Solid‐State Li+ Conductors

The integration of highly conductive solid‐state electrolytes (SSEs) into solid‐state cells is still a challenge mainly due to the high impedance existing at the electrolyte/electrode interface. Although solid‐state garnet‐based batteries have been successfully assembled with the assistance of an intermediate layer between the garnet and the Li metal anode, the slow discharging/charging rates of the batteries inhibits practical applications, which require much higher power densities. Here, a crystalline sulfonated‐covalent organic framework (COF) thin layer is grown on the garnet surface via a simple solution process. It not only significantly improves the lithiophilicity of garnet electrolytes via the lithiation of the COF layer with molten Li, but also creates effective Li⁺ diffusion “highways” between the garnet and the Li metal anode. As a result, the interfacial impedance of symmetric solid‐state Li cells is significantly decreased and the cells can be operated at high current densities up to 3 mA cm^?2, which is difficult to achieve with current interfacial modification technologies for SSEs. The solid‐state Li‐ion batteries using LiFePO₄ cathodes, Li anodes, and COF‐modified garnet electrolytes thus exhibit a significantly improved rate capability.     

A High‐Throughput Search for Functionally Stable Interfaces in Sulfide Solid‐State Lithium Ion Conductors

Interfacial reactions between ceramic‐sulfide solid‐electrolytes and common electrodes have remained a major impediment to the development of solid‐state lithium‐ion batteries. In practice, this means that ceramic‐sulfide batteries require a suitable coating material to isolate the electrolyte from the electrode materials. In this work, the interfacial stability of Li₁₀SiP₂S₁₂ with over 67 000 materials is computationally evaluated. Over 2000 materials that are predicted to form stable interfaces in the cathode voltage range and over 1000 materials for the anode range are reported on and cataloged. LiCoO₂ is chosen as an example cathode material to identify coating compounds that are stable with both Li₁₀SiP₂S₁₂ and a common cathode. The correlation between elemental composition and multiple instability metrics (e.g., chemical/electrochemical) is analyzed, revealing key trends in, amongst others, the role of anion selection. A new binary‐search algorithm is introduced for evaluating the pseudo‐phase with improved speed and accuracy. Computational challenges posed by high‐throughput interfacial phase‐diagram calculations are highlighted as well as pragmatic computational methods to make such calculations routinely feasible. In addition to the over 3000 materials cataloged, representative materials from the anionic classes of oxides, fluorides, and sulfides are chosen to experimentally demonstrate chemical stability when in contact with Li₁₀SiP₂S₁₂.     

Deformable and Transparent Ionic and Electronic Conductors for Soft Energy Devices

The recent boom in deformable or stretchable electronics, flexible transparent displays/screens, and their integration into the human body has facilitated the development of multifunctional energy devices that are stretchable, transparent, wearable, and/or biocompatible while meeting the energy or power requirements. The development of soft energy systems begins with the preparation of relevant conductors and the design of innovative device configurations. In this study, recent advances and trends in stretchable and transparent electronic and ionic conductors are reviewed coupled with the growing efforts to use them for soft energy storage and conversion systems. Stretchable transparent ionic conductors present possibilities for use as current collectors and electrolytes in soft electronic/energy devices, providing novel insight into biofriendly systems for an effective human–machine interaction. Moreover, representative examples that demonstrate soft energy devices based on stretchable transparent ionic/electronic conductors are discussed in detail. Furthermore, the challenges and perspectives of developing novel stretchable transparent conductors and device configurations with tailored features are also considered.     

Single‐Ion Conducting Electrolyte Based on Electrospun Nanofibers for High‐Performance Lithium Batteries

Herein, a novel electrospun single‐ion conducting polymer electrolyte (SIPE) composed of nanoscale mixed poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP) and lithium poly(4,4′‐diaminodiphenylsulfone, bis(4‐carbonyl benzene sulfonyl)imide) (LiPSI) is reported, which simultaneously overcomes the drawbacks of the polyolefin‐based separator (low porosity and poor electrolyte wettability and thermal dimensional stability) and the LiPF₆ salt (poor thermal stability and moisture sensitivity). The electrospun nanofiber membrane (es‐PVPSI) has high porosity and appropriate mechanical strength. The fully aromatic polyamide backbone enables high thermal dimensional stability of es‐PVPSI membrane even at 300 °C, while the high polarity and high porosity ensures fast electrolyte wetting. Impregnation of the membrane with the ethylene carbonate (EC)/dimethyl carbonate (DMC) (v:v = 1:1) solvent mixture yields a SIPE offering wide electrochemical stability, good ionic conductivity, and high lithium‐ion transference number. Based on the above‐mentioned merits, Li/LiFePO₄ cells using such a SIPE exhibit excellent rate capacity and outstanding electrochemical stability for 1000 cycles at least, indicating that such an electrolyte can replace the conventional liquid electrolyte–polyolefin combination in lithium ion batteries (LIBs). In addition, the long‐term stripping–plating cycling test coupled with scanning electron microscope (SEM) images of lithium foil clearly confirms that the es‐PVPSI membrane is capable of suppressing lithium dendrite growth, which is fundamental for its use in high‐energy Li metal batteries.     

Organohalide Perovskites are Fast Ionic Conductors

Fast ionic conductors constitute a family of materials exhibiting high values of the ionic conductivity while their crystal structure remains rather rigid. Perovskite‐like compounds are known to be good ionic conductors with applications as solid electrolytes. In hybrid halide perovskites both intrinsic (native) and extrinsic defect migration are regarded to occur. Ion diffusivity analysis is inherently ambiguous in all‐solid‐state configurations because of the multicomponent environment. Here, a liquid electrolyte in contact to the perovskite material forms a reservoir of Li⁺ that is forced to intercalate and migrate within the perovskite electrode. This approach decouples different contributions to transport in such a way that ion diffusion kinetics is easily accessible by means of impedance methods. The room‐temperature chemical diffusion coefficient of lithium ion within the perovskite lattice exhibits values as high as D _μ ≈ 10^?7 cm² s^?1, which implies conductivities within the range of 10^?3 Ω^?1 cm^?1 for highly lithiated electrodes. This confirms the superionic intrinsic property of organohalide perovskites from a direct and unambiguous measurement that does not rely upon simulation tools.     

Polymer‐in‐“Quasi‐Ionic Liquid” Electrolytes for High‐Voltage Lithium Metal Batteries

Due to the limited oxidation stability (<4 V) of ether oxygen in its polymer structure, polyethylene oxide (PEO)‐based polymer electrolytes are not compatible with high‐voltage (>4 V) cathodes, thus hinder further increases in the energy density of lithium (Li) metal batteries (LMBs). Here, a new type of polymer‐in‐“quasi‐ionic liquid” electrolyte is designed, which reduces the electron density on ethereal oxygens in PEO and ether solvent molecules, induces the formation of stable interfacial layers on both surfaces of the LiNi_1/3Mn_1/3Co_1/3O₂ (NMC) cathode and the Li metal anode in Li||NMC batteries, and results in a capacity retention of 88.4%, 86.7%, and 79.2% after 300 cycles with a charge cutoff voltage of 4.2, 4.3, and 4.4 V for the LMBs, respectively. Therefore, the use of “quasi‐ionic liquids” is a promising approach to design new polymer electrolytes for high‐voltage and high‐specific‐energy LMBs.     

Lithium Difluorophosphate‐Based Dual‐Salt Low Concentration Electrolytes for Lithium Metal Batteries

The safety hazards and low Coulombic efficiency originating from the growth of lithium dendrites and decomposition of the electrolyte restrict the practical application of Li metal batteries (LMBs). Inspired by the low cost of low concentration electrolytes (LCEs) in industrial applications, dual‐salt LCEs employing 0.1 m Li difluorophosphate (LiDFP) and 0.4 m LiBOB/LiFSI/LiTFSI are proposed to construct a robust and conductive interphase on a Li metal anode. Compared with the conventional electrolyte using 1 m LiPF₆, the ionic conductivity of LCEs is reduced but the conductivity decrement of the separator immersed in LCEs is moderate, especially for the LiDFP–LiFSI and LiDFP–LiTFSI electrolytes. The accurate Coulombic efficiency (CE) of the Li||Cu cells increases from 83.3% (electrolyte using 1 m LiPF₆) to 97.6%, 94.5%, and 93.6% for LiDFP–LiBOB, LiDFP–LiFSI, and LiDFP–LiTFSI electrolytes, respectively. The capacity retention of Li||LiFePO₄ cells using the LiDFP–LiBOB electrolyte reaches 95.4% along with a CE over 99.8% after 300 cycles at a current density of 2.0 mA cm^?2 and the capacity reaches 103.7 mAh g^?1 at a current density of up to 16.0 mA cm^?2. This work provides a dual‐salt LCE for practical LMBs and presents a new perspective for the design of electrolytes for LMBs.     

Super‐Stretchable Zinc–Air Batteries Based on an Alkaline‐Tolerant Dual‐Network Hydrogel Electrolyte

Stretchable devices need elastic hydrogel electrolyte as an essential component, while most hydrogels will lose their stretchability after being incorporated with strong alkaline solution. This is why highly stretchable zinc–air batteries have never been reported so far. Herein, super‐stretchable, flat‐ (800% stretchable) and fiber‐shaped (500% stretchable) zinc–air batteries are first developed by designing an alkaline‐tolerant dual‐network hydrogel electrolyte. In the dual‐network hydrogel electrolyte, sodium polyacrylate (PANa) chains contribute to the formation of soft domains and the carboxyl groups neutralized by hydroxyls as well as cellulose as potassium hydroxide stabilizer are responsible for vastly enhanced alkaline tolerance. The obtained super‐stretchable, flat zinc–air battery exhibits a high power density of 108.6 mW?cm^?2, increasing to 210.5 mW?cm^?2 upon being 800% stretched. Similar phenomena are observed for the 500% stretchable fiber‐shaped batteries. The devices can maintain stable power output even after being heavily deformed benefiting from the highly soft, alkaline‐tolerant hydrogel electrolyte developed. A bendable battery‐display system and water proof weavable fiber zinc–air battery are also demonstrated. This work will facilitate the progress of using zinc–air battery powering flexible electronics and smart clothes. Moreover, the developed alkaline‐tolerant super‐stretchable electrolyte can also be applied for many other alkaline electrolyte‐based energy storage/conversion devices.     

Super‐beacons: Open‐source probes with spontaneous tuneable blinking compatible with live‐cell super‐resolution microscopy

Localization‐based super‐resolution microscopy relies on the detection of individual molecules cycling between fluorescent and non‐fluorescent states. These transitions are commonly regulated by high‐intensity illumination, imposing constrains to imaging hardware and producing sample photodamage. Here, we propose single‐molecule self‐quenching as a mechanism to generate spontaneous photoswitching. To demonstrate this principle, we developed a new class of DNA‐based open‐source super‐resolution probes named super‐beacons, with photoswitching kinetics that can be tuned structurally, thermally and chemically. The potential of these probes for live‐cell compatible super‐resolution microscopy without high‐illumination or toxic imaging buffers is revealed by imaging interferon inducible transmembrane proteins (IFITMs) at sub‐100 nm resolutions.