MoS2‐Based All‐Purpose Fibrous Electrode and Self‐Powering Energy Fiber for Efficient Energy Harvesting and Storage

Here an all‐purpose fibrous electrode based on MoS₂ is demonstrated, which can be employed for versatile energy harvesting and storage applications. In this coaxial electrode, ultrathin MoS₂ nanofilms are grown on TiO₂ nanoparticles coated carbon fiber. The high electrochemical activity of MoS₂ and good conductivity of carbon fiber synergistically lead to the remarkable performances of this novel composite electrode in fibrous dye‐sensitized solar cells (showing a record‐breaking conversion efficiency of 9.5%) and high‐capacity fibrous supercapacitors. Furthermore, a self‐powering energy fiber is fabricated by combining a fibrous dye‐sensitized solar cell and a fibrous supercapacitor into a single device, showing very fast charging capability (charging in 7 s under AM1.5G solar illumination) and an overall photochemical‐electricity energy conversion efficiency as high as 1.8%. In addition, this wire‐shaped electrode can also be used for fibrous Li‐ion batteries and electrocatalytic hydrogen evolution reactions. These applications indicate that the MoS₂‐based all‐purpose fibrous electrode has great potential for the construction of high‐performance flexible and wearable energy devices.     

Phosphorene as Cathode Material for High‐Voltage,Anti‐Self‐Discharge Zinc Ion Hybrid Capacitors

Output voltage and self‐discharge rate are two important performance indices for supercapacitors, which have long been overlooked, though these play a very significant role in their practical application. Here, a zinc anode is used to construct a zinc ion hybrid capacitor. Expanded operating voltage of the hybrid capacitor is obtained with novel electrolytes. In addition, significantly improved anti‐self‐discharge ability is achieved. The phosphorene‐based zinc ion capacitor exploiting a “water in salt” electrolyte with a working potential can reach 2.2 V, delivering 214.3 F g^?1 after 5000 cycles. The operating voltage is further extended to 2.5 V through the use of an organic solvent as the electrolyte; the solvent is prepared by adding 0.2 m ZnCl₂ into the tetraethylammonium tetrafluoroborate in propylene carbonate (Et₄NBF₄/PC) solvent, and it exhibits 105.9 F g^?1 even after 9500 cycles. More importantly, the phosphorene‐based capacitors possess excellent anti‐self‐discharge performance. The capacitors retain 76.16% of capacitance after resting for 300 h. The practical application of the zinc ion capacitor is demonstrated through a flexible paper‐based printed microcapacitor. It is believed that the developed zinc ion capacitor can effectively resolve the severe self‐discharge problem of supercapacitors. Moreover, high‐voltage zinc ion capacitors provide more opportunities for the application of supercapacitors.     

Triboelectrification‐Enabled Self‐Charging Lithium‐Ion Batteries

Li‐ion batteries as energy storage devices need to be periodically charged for sustainably powering electronic devices owing to their limited capacities. Here, the feasibility of utilizing Li‐ion batteries as both the energy storage and scavenging units is demonstrated. Flexible Li‐ion batteries fabricated from electrospun LiMn₂O₄ nanowires as cathode and carbon nanowires as anode enable a capacity retention of 90% coulombic efficiency after 50 cycles. Through the coupling between triboelectrification and electrostatic induction, the adjacent electrodes of two Li‐ion batteries can deliver an output peak voltage of about 200 V and an output peak current of about 25 µA under ambient wind‐induced vibrations of a hexafluoropropene–tetrafluoroethylene copolymer film between the two Li‐ion batteries. The self‐charging Li‐ion batteries have been demonstrated to charge themselves up to 3.5 V in about 3 min under wind‐induced mechanical excitations. The advantages of the self‐charging Li‐ion batteries can provide important applications for sustainably powering electronics and self‐powered sensor systems.     

Layered Oxide Cathodes for Sodium‐Ion Batteries: Phase Transition,Air Stability,and Performance

The increasing demand for replacing conventional fossil fuels with clean energy or economical and sustainable energy storage drives better battery research today. Sodium‐ion batteries (SIBs) are considered as a promising alternative for grid‐scale storage applications due to their similar “rocking‐chair” sodium storage mechanism to lithium‐ion batteries, the natural abundance, and the low cost of Na resources. Searching for appropriate electrode materials with acceptable electrochemical performance is the key point for development of SIBs. Layered transition metal oxides represent one of the most fascinating electrode materials owing to their superior specific capacity, environmental benignity, and facile synthesis. However, three major challenges (irreversible phase transition, storage instability, and insufficient battery performance) are known for cathodes in SIBs. Herein, a comprehensive review on the latest advances and progresses in the exploration of layered oxides for SIBs is presented, and a detailed and deep understanding of the relationship of phase transition, air stability, and electrochemical performance in layered oxide cathodes is provided in terms of refining the structure–function–property relationship to design improved battery materials. Layered oxides will be a competitive and attractive choice as cathodes for SIBs in next‐generation energy storage devices.     

Thermally Chargeable Solid‐State Supercapacitor

Ubiquitous low‐grade thermal energy, which is typically wasted without use, can be extremely valuable for continuously powering electronic devices such as sensors and wearable electronics. A popular choice for waste heat recovery has been thermoelectric energy conversion, but small output voltage without energy‐storing capability necessitates additional components such as a voltage booster and a capacitor. Here, a novel method of simultaneously generating a large voltage from a temperature gradient and storing electrical energy without losing the benefit of solid‐state no‐moving part devices like conventional thermoelectrics is reported. Thermally driven ion diffusion is used to greatly increase the output voltage (8 mV K^?1) with polystyrene sulfonic acid (PSSH) film. Polyaniline‐coated electrodes containing graphene and carbon nanotube sandwich the PSSH film where thermally induced voltage‐enabled electrochemical reactions, resulting in a charging behavior without an external power supply. With a small temperature difference (5 K) possibly created over wearable energy harvesting devices, the thermally chargeable supercapacitor produce 38 mV with a large areal capacitance (1200 F m^?2). It is anticipated that the attempt with thermally driven ion diffusion behaviors initiates a new research direction in thermal energy harvesting.     

Dendrite‐Free Flexible Fiber‐Shaped Zn Battery with Long Cycle Life in Water and Air

Fiber‐shaped aqueous rechargeable Zn batteries (FARZBs) show flexibility, good reliability, cost‐effectiveness, high energy/power densities, and high safety that have attracted increasing attention as promising energy storage devices for future wearable applications. However, the development of FARZB is limited by its poor cycling life and inferior charge–discharge performance, mainly suffering from zinc dendrite growth and increasing electrode irreversibility. In this work, dendrite‐free fiber‐shaped Zn//Co₃O₄ rechargeable batteries with a long cycle life tested in water and air, are obtained via tuning the surface binding energy of Zn on the anode using the zincophilic N,O‐functional carbon fiber, as well as engineering the Co₃O₄ cathode with a nanowire array structure. The fiber‐shaped Zn//Co₃O₄ full battery demonstrates remarkable long cycle life in water and air with high energy density, impressive flexibility, and excellent waterproof ability (fully immersed and charged/discharged under water for more than 33 h for 3000 cycles with capacity retention of ≈80%). The reversible electrochemical mechanisms of the FARZBs, without obvious zinc dendrite deposits and structural change of Co₃O₄ nanowires, are confirmed by a series of characterizations. These results demonstrate that the FARZBs are promising power sources for emerging wearable electronics.     

Extended “Adsorption–Insertion” Model: A New Insight into the Sodium Storage Mechanism of Hard Carbons

Hard carbons (HCs) are promising anodes of sodium‐ion batteries (SIBs) due to their high capacity, abundance, and low cost. However, the sodium storage mechanism of HCs remains unclear with no consensus in the literature. Here, based on the correlation between the microstructure and Na storage behavior of HCs synthesized over a wide pyrolysis temperature range of 600–2500 °C, an extended “adsorption–insertion” sodium storage mechanism is proposed. The microstructure of HCs can be divided into three types with different sodium storage mechanisms. The highly disordered carbon, with d₀₀₂ (above 0.40 nm) large enough for sodium ions to freely transfer in, has a “pseudo‐adsorption” sodium storage mechanism, contributing to sloping capacity above 0.1 V, together with other conventional “defects” (pores, edges, heteroatoms, etc.). The pseudo‐graphitic carbon (d‐spacing in 0.36–0.40 nm) contributes to the low‐potential (<0.1 V) plateau capacity through “interlayer insertion” mechanism, with a theoretical capacity of 279 mAh g^?1 for NaC₈ formation. The graphite‐like carbon with d₀₀₂ below 0.36 nm is inaccessible for sodium ion insertion. The extended “adsorption–insertion” model can accurately explain the dependence of the sodium storage behavior of HCs with different microstructures on the pyrolysis temperature and provides new insight into the design of HC anodes for SIBs.     

Quantification of Pseudocapacitive Contribution in Nanocage‐Shaped Silicon–Carbon Composite Anode

Pseudocapacitive materials have been highlighted as promising electrode materials to overcome slow diffusion‐limited redox mechanism in active materials, which impedes fast charging/discharging in energy storage devices. However, previously reported pseudocapacitive properties have been rarely used in lithium‐ion batteries (LIBs) and evaluation methods have been limited to those focused on thin‐film‐type electrodes. Hence, a nanocage‐shaped silicon–carbon composite anode is proposed with excellent pseudocapacitive qualities for LIB applications. This composite anode exhibits a superior rate capability compared to other Si‐based anodes, including commercial silicon nanoparticles, because of the higher pseudocapacitive contribution coming from ultrathin Si layer. Furthermore, unprecedent 3D pore design in cage shape, which prevents the particle scale expansion even after full lithiation demonstrates the high cycling stability. This concept can potentially be used to realize high‐power and high‐energy LIB anode materials.     

Conductive Li3.08Cr0.02Si0.09V0.9O4 Anode Material: Novel “Zero‐Strain” Characteristic and Superior Electrochemical Li+ Storage

“Zero‐strain” compounds are ideal energy‐storage materials for long‐term cycling because they present negligible volume change and significantly reduce the mechanically induced deterioration during charging–discharging. However, the explored “zero‐strain” compounds are very limited, and their energy densities are low. Here, γ phase Li_3.08Cr_0.02Si_0.09V_0.9O₄ (γ‐LCSVO) is explored as an anode compound for lithium‐ion batteries, and surprisingly its “zero‐strain” Li⁺ storage during Li⁺ insertion–extraction is found through using various state‐of‐the‐art characterization techniques. Li⁺ sequentially inserts into the 4c(1) and 8d sites of γ‐LCSVO, but its maximum unit‐cell volume variation is only ≈0.18%, the smallest among the explored “zero‐strain” compounds. Its mean strain originating from Li⁺ insertion is only 0.07%. Consequently, both γ‐LCSVO nanowires (γ‐LCSVO‐NW) and micrometer‐sized particles (γ‐LCSVO‐MP) exhibit excellent cycling stability with 90.1% and 95.5% capacity retention after as long as 2000 cycles at 10C, respectively. Moreover, γ‐LCSVO‐NW and γ‐LCSVO‐MP respectively deliver large reversible capacities of 445.7 and 305.8 mAh g^?1 at 0.1C, and retain 251.2 and 78.4 mAh g^?1 at 10C. Additionally, γ‐LCSVO shows a suitably safe operating potential of ≈1.0 V, significantly lower than that of the famous “zero‐strain” Li₄Ti₅O₁₂ (≈1.6 V). These merits demonstrate that γ‐LCSVO can be a practical anode compound for stable, high‐energy, fast‐charging, and safe Li⁺ storage.     

An Ultrastable Presodiated Titanium Disulfide Anode for Aqueous “Rocking‐Chair” Zinc Ion Battery

Rechargeable aqueous Zn‐based batteries are attractive candidates as energy storage technology, but the uncontrollable Zn dendrites, low stripping/plating coulombic efficiency, and inefficient utilization of Zn metal limit the battery reliability and energy density. Herein, for the first time, a novel presodiated TiS₂ (Na_0.14TiS₂) is proposed and investigated as an intercalated anode for aqueous Zn‐ion batteries, showing a capacity of 140 mAh g^?1 with a suitable potential of 0.3 V (vs Zn²⁺/Zn) at 0.05 A g^?1 and superior cyclability of 77% retention over 5000 cycles at 0.5 A g^?1. The remarkable performance originates from the buffer phase formation of Na_0.14TiS₂ after chemically presodiating TiS₂, which not only improves the structural reversibility and stability but also enhances the diffusion coefficient and electronic conductivity, and lowers cation migration barrier, as evidenced by a series of experimental and theoretical studies. Moreover, an aqueous “rocking‐chair” Zn‐ion full battery is successfully demonstrated by this Na_0.14TiS₂ anode and ZnMn₂O₄ cathode, which delivers a capacity of 105 mAh g^?1 (for anode) with an average voltage of 0.95 V at 0.05 A g^?1 and preserves 74% retention after 100 cycles at 0.2 A g^?1, demonstrating the feasibility of Zn‐ion full batteries for energy storage applications.     

Aqueous Electrochemical Energy Storage with a Mediator‐Ion Solid Electrolyte

This study presents a battery concept with a “mediator‐ion” solid electrolyte for the development of next‐generation electrochemical energy storage technologies. The active anode and cathode materials in a single cell can be in the solid, liquid, or gaseous form, which are separated by a sodium‐ion solid‐electrolyte separator. The uniqueness of this mediator‐ion strategy is that the redox reactions at the anode and the cathode are sustained by a shuttling of a mediator sodium ion between the anolyte and the catholyte through the solid‐state electrolyte. Use of the solid‐electrolyte separator circumvents the chemical‐crossover problem between the anode and the cathode, overcomes the dendrite‐problem when employing metal‐anodes, and offers the possibility of using different liquid electrolytes at the anode and the cathode in a single cell. The battery concept is demonstrated with two low‐cost metal anodes (zinc and iron), two liquid cathodes (bromine and potassium ferricyanide), and one gaseous cathode (air/O₂) with a sodium‐ion solid electrolyte. This novel battery strategy with a mediator‐ion solid electrolyte is applicable to a wide range of electrochemical energy storage systems with a variety of cathodes, anodes, and mediator‐ion solid electrolytes.     

Hybrid and Aqueous Lithium‐Air Batteries

Lithium‐air (Li‐air) batteries have become attractive because of their extremely high theoretical energy density. However, conventional Li‐air cells operating with non‐aqueous electrolytes suffer from poor cycle life and low practical energy density due to the clogging of the porous air cathode by insoluble discharge products, contamination of the organic electrolyte and lithium metal anode by moist air, and decomposition of the electrolyte during cycling. These difficulties may be overcome by adopting a cell configuration that consists of a lithium‐metal anode protected from air by a Li⁺‐ion solid electrolyte and an air electrode in an aqueous catholyte. In this type of configuration, a Li⁺‐ion conducting “buffer” layer between the lithium‐metal anode and the solid electrolyte is often necessary due to the instability of many solid electrolytes in contact with lithium metal. Based on the type of buffer layer, two different battery configurations are possible: “hybrid” Li‐air batteries and “aqueous” Li‐air batteries. The hybrid and aqueous Li‐air batteries utilize the same battery chemistry and face similar challenges that limit the cell performance. Here, an overview of recent developments in hybrid and aqueous Li‐air batteries is provided and the factors that influence their performance and impede their practical applications, followed by future directions are discussed.     

Rational Construction of Nitrogen‐Doped Hierarchical Dual‐Carbon for Advanced Potassium‐Ion Hybrid Capacitors

Potassium‐ion hybrid capacitors (PIHCs), elaborately integrate the advantages of high output power as well as long lifespan of supercapacitors and the high energy density of batteries, and exhibit great possibilities for the future generations of energy storage devices. The critical next step for future implementation lies in exploring a high‐rate battery‐type anode with an ultra‐stable structure to match the capacitor‐type cathode. Herein, a “dual‐carbon” is constructed, in which a three‐dimensional nitrogen‐doped microporous carbon polyhedron (NMCP) derived from metal‐organic frameworks is tightly wrapped by two‐dimensional reduced graphene oxide (NMCP@rGO). Benefiting from the synergistic effect of the inner NMCP and outer rGO, the NMCP@rGO exhibits a superior K‐ion storage capability with a high reversible capacity of 386 mAh g^?1 at 0.05 A g^?1 and ultra‐long cycle stability with a capacity of 151.4 mAh g^?1 after 6000 cycles at 5.0 A g^?1. As expected, the as‐assembled PIHCs with a working voltage as high as 4.2 V present a high energy/power density (63.6 Wh kg^?1 at 19 091 W kg^?1) and excellent capacity retention of 84.7% after 12 000 cycles. This rational construction of advanced PIHCs with excellent performance opens a new avenue for further application and development.     

Versatile Core–Sheath Yarn for Sustainable Biomechanical Energy Harvesting and Real‐Time Human‐Interactive Sensing

The emergence of stretchable textile‐based mechanical energy harvester and self‐powered active sensor brings a new life for wearable functional electronics. However, single energy conversion mode and weak sensing capabilities have largely hindered their development. Here, in virtue of silver‐coated nylon yarn and silicone rubber elastomer, a highly stretchable yarn‐based triboelectric nanogenerator (TENG) with coaxial core–sheath and built‐in spring‐like spiral winding structures is designed for biomechanical energy harvesting and real‐time human‐interactive sensing. Based on the two advanced structural designs, the yarn‐based TENG can effectively harvest or respond rapidly to omnifarious external mechanical stimuli, such as compressing, stretching, bending, and twisting. With these excellent performances, the yarn‐based TENG can be used in a self‐counting skipping rope, a self‐powered gesture‐recognizing glove, and a real‐time golf scoring system. Furthermore, the yarn‐based TENG can also be woven into a large‐area energy‐harvesting fabric, which is capable of lighting up light emitting diodes (LEDs), charging a commercial capacitor, powering a smart watch, and integrating the four operational modes of TENGs together. This work provides a new direction for textile‐based multimode mechanical energy harvesters and highly sensitive self‐powered motion sensors with potential applications in sustainable power supplies, self‐powered wearable electronics, personalized motion/health monitoring, and real‐time human‐machine interactions.     

High Energy and High Power Lithium‐Ion Capacitors Based on Boron and Nitrogen Dual‐Doped 3D Carbon Nanofibers as Both Cathode and Anode

High energy density at high power density is still a challenge for the current Li‐ion capacitors (LICs) due to the mismatch of charge‐storage capacity and electrode kinetics between capacitor‐type cathode and battery‐type anode. In this work, B and N dual‐doped 3D porous carbon nanofibers are prepared through a facile method as both capacitor‐type cathode and battery‐type anode for LICs. The B and N dual doping has profound effect in tuning the porosity, functional groups, and electrical conductivity for the porous carbon nanofibers. With rational design, the developed B and N dual‐doped carbon nanofibers (BNC) exhibit greatly improved electrochemical performance as both cathode and anode for LICs, which greatly alleviates the mismatch between the two electrodes. For the first time, a 4.5 V “dual carbon” BNC//BNC LIC device is constructed and demonstrated, exhibiting outstanding energy density and power capability compared to previously reported LICs with other configurations. In specific, the present BNC//BNC LIC device can deliver a large energy density of 220 W h kg^?1 and a high power density of 22.5 kW kg^?1 (at 104 W h kg^?1) with reasonably good cycling stability (≈81% retention after 5000 cycles).     

A Calcium‐Ion Hybrid Energy Storage Device with High Capacity and Long Cycling Life under Room Temperature

Ca‐ion based devices are promising candidates for next‐generation energy storage with high performance and low cost, thanks to its multielectrons, superior kinetics, as well as abundance (2500 times lithium). Because of the lack of an appropriate combination of suitable electrode materials and electrolytes, it is unsuccessful to attain a satisfactory performance on complete Ca‐ion energy storage devices. Here, the multiion reaction strategy is defined to construct a complete Ca‐ion energy storage device and a capacitor–battery hybrid mechanism is deliberately adopted. Profiting from the elaborate design, it exhibits a high reversible capacity of 92 mAh g^?1, unmatchable rate capability, and a high capacity retention of 84% over 1000 cycles under room temperature, which is the best performance of reported Ca‐based energy storage devices.     

“Uncovering” Industrial Symbiosis

Since 1989, efforts to understand the nature of interfirm resource sharing in the form of industrial symbiosis and to replicate in a deliberate way what was largely self‐organizing in Kalundborg, Denmark have followed many paths, some with much success and some with very little. This article provides a historical view of the motivations and means for pursuing industrial symbiosis—defined to include physical exchanges of materials, energy, water, and by‐products among diversified clusters of firms. It finds that “uncovering” existing symbioses has led to more sustainable industrial development than attempts to design and build eco‐industrial parks incorporating physical exchanges. By examining 15 proposed projects brought to national and international attention by the U.S. President's Council on Sustainable Development beginning in the early 1990s, and contrasting these with another 12 projects observed to share more elements of self‐organization, recommendations are offered to stimulate the identification and uncovering of already existing “kernels” of symbiosis. In addition, policies and practices are suggested to identify early‐stage precursors of potentially larger symbioses that can be nurtured and developed further. The article concludes that environmentally and economically desirable symbiotic exchanges are all around us and now we must shift our gaze to find and foster them.     

Multidimensional Ordered Bifunctional Air Electrode Enables Flash Reactants Shuttling for High‐Energy Flexible Zn‐Air Batteries

Direct growth of electrocatalysts on conductive substrates is an emerging strategy to prepare air electrodes for flexible Zn‐air batteries (FZABs). However, electrocatalysts grown on conductive substrates usually suffer from disorder and are densely packed with “prohibited zones”, in which internal blockages shut off the active sites from catalyzing the oxygen reaction. Herein, to minimize the “prohibited zones”, an ordered multidimensional array assembled by 1D carbon nanotubes and 2D carbon nanoridges decorated with 0D cobalt nanoparticles (referred as MPZ‐CC@CNT) is constructed on nickel foam. When the MPZ‐CC@CNT is directly applied as a self‐supported electrode for FZAB, it delivers a marginal voltage fading rate of 0.006 mV cycle^?1 over 1800 cycles (600 h) at a current density of 50 mA cm^?2 and an impressive energy density of 946 Wh kg^?1. Electrochemical impedance spectroscopy reveals that minimal internal resistance and electrochemical polarization, which is beneficial for the flash reactant shuttling among the triphase (i.e., oxygen, electrolyte, and catalyst) are offered by the open and ordered architecture. This advanced electrode design provides great potential to boost the electrochemical performance of other rechargeable battery systems.     

Diffusion‐Limited C‐Rate: A Fundamental Principle Quantifying the Intrinsic Limits of Li‐Ion Batteries

The critical challenge for the user acceptance of electric vehicles is the simultaneous improvement of the driving range and fast charging capabilities, which are related to the energy and power density of the storage device. Lithium‐ion batteries (LIBs) are currently the most promising candidate to push electric vehicles toward the mass market. However, they suffer from a tradeoff between energy and power density, forbidding arbitrary combinations of high storage capacity and fast charging capability. Herein, a simple electrochemical principle describing the intrinsic limits of LIBs is reported. It is deduced that the tradeoff between energy and power density originates from diffusion limitations in the electrolyte. The electrochemical approach of diffusion‐limited current density is adapted to porous Li‐ion insertion electrodes, resulting in the “diffusion‐limited C‐rate” (DLC). The theoretical considerations are in excellent agreement with experimentally observed rate limitations of a large number of electrodes with different active materials and varying design parameters. While the C‐rate drawn from an LIB cannot be higher than the DLC without significant capacity decline, parameter variations that improve the DLC reduce the nominal specific capacity. This relationship makes the DLC a fundamental quantity revealing the most expedient optimization approaches and promising directions for future battery research and development.     

A Portable and Efficient Solar‐Rechargeable Battery with Ultrafast Photo‐Charge/Discharge Rate

The solar‐rechargeable electric energy storage systems (SEESSs), which can simultaneously harvest and store solar energy, are considered a promising next‐generation renewable energy supply system. However, the difficulty in meeting the demands of higher overall photoelectric conversion and storage efficiency (PCSE) with both high power density and large energy density in the current SEESSs severely limit their practical application. Herein, a new class is demonstrated of portable and highly efficient SEESS that uniquely integrates a perovskite solar module (PSM) and an aluminum‐ion battery (AIB) directly on a bifunctional aluminum electrode without any external circuit. Such nanostructural design in the SEESS not only exhibits fast photo‐charge/discharge rate (less than one minute) with high power density (above 5000 W kg^?1), but also delivers a high energy density (above 43 Wh kg^?1). By rationally matching the maximum power point voltage of PSM with AIB charging voltage, an excellent solar‐charging efficiency of 15.2% and a high PCSE of 12.04% are achieved, which is among the best in all reported portable SEESSs. Moreover, enhanced PCSE is observed as the light intensity decreases, which makes such SEESS immune from the geographical location and climate limitations for diverse practical applications.