Solar‐Light‐Driven CO2 Reduction by CH4 on Silica‐Cluster‐Modified Ni Nanocrystals with a High Solar‐to‐Fuel Efficiency and Excellent Durability

Catalytic CO₂ reforming of CH₄ (CRM) to produce syngas (H₂ and CO) provides a promising approach to reducing global CO₂ emissions and the extensive utilization of natural gas resources. However, the rapid deactivation of the reported catalysts due to severe carbon deposition at high reaction temperatures and the large energy consumption of the process hinder its industrial application. Here, a method for almost completely preventing carbon deposition is reported by modifying the surface of Ni nanocrystals with silica clusters. The obtained catalyst exhibits excellent durability for CRM with almost no carbon deposition and deactivation after reaction for 700 h. Very importantly, it is found that CRM on the catalyst can be driven by focused solar light, thus providing a promising new approach to the conversion of renewable solar energy to fuel due to the highly endothermic characteristics of CRM. The reaction yields high production rates of H₂ and CO (17.1 and 19.9 mmol min^?1 g^?1, respectively) with a very high solar‐to‐fuel efficiency (η, 12.5%). Even under focused IR irradiation with a wavelength above 830 nm, the η of the catalyst remains as high as 3.1%. The highly efficient catalytic activity arises from the efficient solar‐light‐driven thermocatalytic CRM enhanced by a novel photoactivation effect.     

MoS2‐Based All‐Purpose Fibrous Electrode and Self‐Powering Energy Fiber for Efficient Energy Harvesting and Storage

Here an all‐purpose fibrous electrode based on MoS₂ is demonstrated, which can be employed for versatile energy harvesting and storage applications. In this coaxial electrode, ultrathin MoS₂ nanofilms are grown on TiO₂ nanoparticles coated carbon fiber. The high electrochemical activity of MoS₂ and good conductivity of carbon fiber synergistically lead to the remarkable performances of this novel composite electrode in fibrous dye‐sensitized solar cells (showing a record‐breaking conversion efficiency of 9.5%) and high‐capacity fibrous supercapacitors. Furthermore, a self‐powering energy fiber is fabricated by combining a fibrous dye‐sensitized solar cell and a fibrous supercapacitor into a single device, showing very fast charging capability (charging in 7 s under AM1.5G solar illumination) and an overall photochemical‐electricity energy conversion efficiency as high as 1.8%. In addition, this wire‐shaped electrode can also be used for fibrous Li‐ion batteries and electrocatalytic hydrogen evolution reactions. These applications indicate that the MoS₂‐based all‐purpose fibrous electrode has great potential for the construction of high‐performance flexible and wearable energy devices.     

Modified Ceria for “Low‐Temperature” CO2 Utilization: A Chemical Looping Route to Exploit Industrial Waste Heat

Efficient CO₂ utilization is key to limit global climate change. Carbon monoxide, which is a crucial feedstock for chemical synthesis, can be produced by splitting CO₂. However, existing thermochemical routes are energy intensive requiring high operating temperatures. A hybrid redox process (HRP) involving CO₂‐to‐CO conversion using a lattice oxygen‐deprived redox catalyst at relatively low temperatures (<700 °C) is reported. The lattice oxygen of the redox catalyst, restored during CO₂‐splitting, is subsequently used to convert methane to syngas. Operated at temperatures significantly lower than a number of industrial waste heat sources, this cyclic redox process allows for efficient waste heat‐utilization to convert CO₂. To enable the low temperature operation, lanthanum modified ceria (1:1 Ce:La) promoted by rhodium (0.5 wt%) is reported as an effective redox catalyst. Near‐complete CO₂ conversion with a syngas yield of up to 83% at low temperatures is achieved using Rh‐promoted LaCeO_4?x. While La improves low‐temperature bulk redox properties of ceria, Rh considerably enhances the surface catalytic properties for methane activation. Density functional theory calculations further illustrate the underlying functions of La‐substitution. The highly effective redox catalyst and HRP scheme provide a potentially attractive route for chemical production using CO₂, industrial waste heat, and methane, with appreciably lowered CO₂ emissions.     

Edge‐Exposed Molybdenum Disulfide with N‐Doped Carbon Hybridization: A Hierarchical Hollow Electrocatalyst for Carbon Dioxide Reduction

Electrochemical CO₂ reduction (CO₂RR) is a promising technology to produce value‐added fuels and weaken the greenhouse effect. Plenty of efforts are devoted to exploring high‐efficiency electrocatalysts to tackle the issues that show poor intrinsic activity, low selectivity for target products, and short‐lived durability. Herein, density functional theory calculations are firstly utilized to demonstrate guidelines for design principles of electrocatalyst, maximum exposure of catalytic active sites for MoS₂ edges, and electron transfer from N‐doped carbon (NC) to MoS₂ edges. Based on the guidelines, a hierarchical hollow electrocatalyst comprised of edge‐exposed 2H MoS₂ hybridized with NC for CO₂RR is constructed. In situ atomic‐scale observation for catalyst growth is performed by using a specialized Si/SiN_x nanochip at a continuous temperature‐rise period, which reveals the growth mechanism. Abundant exposed edges of MoS₂ provide a large quantity of active centers, which leads to a low onset potential of ≈40 mV and a remarkable CO production rate of 34.31 mA cm^?2 with 92.68% of Faradaic efficiency at an overpotential of 590 mV. The long‐term stability shows negligible degradation for more than 24 h. This work provides fascinating insights into the construction of catalysts for efficient CO₂RR.     

Large‐Area,Ultrathin Inorganic Network Coverages–Graphene Hierarchical Electrodes for Flexible,Heat‐Resistant Energy Storage Application

Graphene and quasi‐2D graphene‐like materials with an ultrathin thickness have been investigated as a new class of nanoscale materials due to their distinctive properties. A novel “molecular tools‐assistances” strategy is developed to fabricate two kinds of graphene‐based electrodes, ultrathin Fe‐doped MnO₂ network coverage–graphene composites (G‐MFO) and ultrathin MoS₂ network coverage–graphene composites (G‐MoS₂) with special hierarchical structures. Such structures enable a large contact interface between the active materials and graphene and thus fully exploit the synergistic effect from both the high specific capacitance of MFO or MoS₂ and the superb conductivity of graphene. Benefiting from their unique structural features, G‐MFO and G‐MoS₂ films directly use as free‐standing electrodes for flexible asymmetric supercapacitors with a nonaqueous gel electrolyte. The device achieves a high energy/power density, superior flexibility, good rate capability as well as outstanding performance stability even at a high temperature. This work represents a promising prototype to design new generation of hybrid supercapacitors for future energy storage devices.     

Scalable Water‐Based Production of Highly Conductive 2D Nanosheets with Ultrahigh Volumetric Capacitance and Rate Capability

Highly conductive and ultrathin 2D nanosheets are of importance for the development of portable electronics and electric vehicles. However, scalable production and rational design for highly electronic and ionic conductive 2D nanosheets still remain a challenge. Herein, an industrially adoptable fluid dynamic exfoliation process is reported to produce large quantities of ionic liquid (IL)‐functionalized metallic phase MoS₂ (m‐MoS₂) and defect‐free graphene (Gr) sheets. Hybrid 2D–2D layered films are also fabricated by incorporating Gr sheets into compact m‐MoS₂ films. The incorporated IL functionalities and Gr sheets prevent aggregation and restacking of the m‐MoS₂ sheets, thereby creating efficient and rapid ion and electron pathways in the hybrid films. The hybrid film with a high packing density of 2.02 g cm^?3 has an outstanding volumetric capacitance of 1430.5 F cm^?3 at 1 A g^?1 and an extremely high rate capability of 80% retention at 1000 A g^?1. The flexible supercapacitor assembled using a polymer‐gel electrolyte exhibits excellent resilience to harsh electrochemical and mechanical conditions while maintaining an impressive rate performance and long cycle life. Successful achievement of an ultrahigh volumetric energy density (1.14 W h cm^?3) using an organic electrolyte with a wide cell voltage of ≈3.5 V is demonstrated.     

Few‐Layer MoS2 Flakes as Active Buffer Layer for Stable Perovskite Solar Cells

Solution‐processed few‐layer MoS₂ flakes are exploited as an active buffer layer in hybrid lead–halide perovskite solar cells (PSCs). Glass/FTO/compact‐TiO₂/mesoporous‐TiO₂/CH₃NH₃PbI₃/MoS₂/Spiro‐OMeTAD/Au solar cells are realized with the MoS₂ flakes having a twofold function, acting both as a protective layer, by preventing the formation of shunt contacts between the perovskite and the Au electrode, and as a hole transport layer from the perovskite to the Spiro‐OMeTAD. As prepared PSC demonstrates a power conversion efficiency (η) of 13.3%, along with a higher lifetime stability over 550 h with respect to reference PSC without MoS₂ (Δη/η = ?7% vs. Δη/η = ?34%). Large‐area PSCs (1.05 cm² active area) are also fabricated to demonstrate the scalability of this approach, achieving η of 11.5%. Our results pave the way toward the implementation of MoS₂ as a material able to boost the shelf life of large‐area perovskite solar cells in view of their commercialization.     

Rational Design of Core@shell Structured CoSx@Cu2MoS4 Hybridized MoS2/N,S‐Codoped Graphene as Advanced Electrocatalyst for Water Splitting and Zn‐Air Battery

A novel hybrid of small core@shell structured CoS_x@Cu₂MoS₄ uniformly hybridizing with a molybdenum dichalcogenide/N,S‐codoped graphene hetero‐network (CoS_x@Cu₂MoS₄‐MoS₂/NSG) is prepared by a facile route. It shows excellent performance toward the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) in alkaline medium. The hybrid exhibits rapid kinetics for ORR with high electron transfer number of ≈3.97 and exciting durability superior to commercial Pt/C. It also demonstrates great potential with remarkable stability for HER and OER, requiring low overpotential of 118.1 and 351.4 mV, respectively, to reach a current density of 10 mA cm^?2. An electrolyzer based on CoS_x@Cu₂MoS₄‐MoS₂/NSG produces low cell voltage of 1.60 V and long‐term stability, surpassing a device of Pt/C + RuO₂/C. In addition, a Zn‐air battery using cathodic CoS_x@Cu₂MoS₄‐MoS₂/NSG catalyst delivers a high cell voltage of ≈1.44 V and a power density of 40 mW cm^?2 at 58 mA cm^?2, better than the state‐of‐the‐art Pt/C catalyst. These achievements are due to the rational combination of highly active core@shell CoS_x@Cu₂MoS₄ with large‐area and high‐porosity MoS₂/NSG to produce unique physicochemical properties with multi‐integrated active centers and synergistic effects. The outperformances of such catalyst suggest an advanced candidate for multielectrocatalysis applications in metal‐air batteries and hydrogen production.     

Dramatic Enhancement of CO2 Photoreduction by Biodegradable Light‐Management Paper

Photocatalytic reduction of CO₂ with H₂O vapor is gaining increased interest because it is a promising “green chemistry” route for the direct conversion of CO₂ to value‐added chemicals driven by solar energy. To increase the efficiency of photocatalytic conversion, most efforts are made by exploring various photocatalysts while little effort on advanced light management. For the first time, it is demonstrated that bio‐degradable transparent paper with excellent light diffusivity can effectively enhance the light utilization of photocatalytic reactions when attached on the device surface, and thus greatly increase the conversion efficiency. As a proof‐of‐concept, a graphitic carbon nitride (g‐C₃N₄) photocatalyst with transparent paper attached, exhibited 1.5 times higher photocatalytic activity than bare g‐C₃N₄ in the reduction of CO₂ under visible light irradiation. The improved catalytic performance can be ascribed to the (1) refractive index matching and (2) enhanced light absorption via prolonged light traveling path in transparent paper, which decreases the light reflection at surface and traps the absorbed light inside, leading to an increased light absorption at the active layer of the device. The transparent paper with a controllable light management behavior has an unprecedented potential for applications in photocatalysis as a general method for improved light utilization.     

Tunable and Efficient Tin Modified Nitrogen‐Doped Carbon Nanofibers for Electrochemical Reduction of Aqueous Carbon Dioxide

Efficient and selective earth‐abundant catalysts are highly desirable to drive the electrochemical conversion of CO₂ into value‐added chemicals. In this work, a low‐cost Sn modified N‐doped carbon nanofiber hybrid catalyst is developed for switchable CO₂ electroreduction in aqueous medium via a straightforward electrospinning technique coupled with a pyrolysis process. The electrocatalytic performance can be tuned by the structure of Sn species on the N‐doped carbon nanofibers. Sn nanoparticles drive efficient formate formation with a high current density of 11 mA cm^?2 and a faradaic efficiency of 62% at a moderate overpotential of 690 mV. Atomically dispersed Sn species promote conversion of CO₂ to CO with a high faradaic efficiency of 91% at a low overpotential of 490 mV. The interaction between Sn species and pyridinic‐N may play an important role in tuning the catalytic activity and selectivity of these two materials.     

Metal‐Free Artificial Photosynthesis of Carbon Monoxide Using N‐Doped ZnTe Nanorod Photocathode Decorated with N‐Doped Carbon Electrocatalyst Layer

An artificial photosynthesis system based on N‐doped ZnTe nanorods decorated with an N‐doped carbon electrocatalyst layer is fabricated via an all‐solution process for the selective conversion of CO₂ to CO. Substitutional N‐doping into the ZnTe lattice decreases the bandgap slightly and improves the charge transfer characteristics, leading to enhanced photoelectrochemical activity. Remarkable N‐doping effects are also demonstrated by the N‐doped carbon layer that promotes selective CO₂‐to‐CO conversion instead of undesired water‐to‐H₂ reduction by providing active sites for CO₂ adsorption and activation, even in the absence of metallic redox centers. The photocathode shows promising performance in photocurrent generation (?1.21 mA cm^?2 at ?0.11 V_RHE), CO selectivity (dominant CO production of ≈72%), minor H₂ reduction (≈20%), and stability (corrosion suppression). The metal‐free electrocatalyst/photocatalyst combination prepared via a cost‐effective solution process exhibits high performance due to synergistic effects between them, and thus may find application in practical solar fuel production.     

Photocatalytic Water Splitting for Solar Hydrogen Production Using the Carbonate Effect and the Z‐Scheme Reaction

The development of innovative technologies for solar energy conversion and storage is important for solving the global warming problem and for establishing a sustainable society. The photocatalytic water‐splitting reaction using semiconductor powders has been intensively studied as a promising technology for direct and simple solar energy conversion. However, the evolution of H₂ and O₂ gases in a stoichiometric ratio (H₂/O₂ = 2) is very difficult owing to various issues, such as an unfavorable backward reaction and mismatched band potentials. Two important findings have widened the variety of photocatalysts available for stoichiometric water‐splitting, viz. the carbonate anion effect and the Z‐scheme photocatalytic reaction using a redox mediator. The bicarbonate anion has been found to act as a redox catalyst via preferential peroxide formation and subsequent decomposition to O₂. As the Z‐scheme reaction using a redox mediator mitigates band potential mismatches, it is widely applicable for various visible‐light‐active photocatalysts. This review describes the development of photocatalytic water‐splitting for solar hydrogen production using the carbonate anion effect and the Z‐scheme reaction. Moreover, recent developments in photocatalysis–electrolysis hybrid systems, an advanced Z‐scheme reaction concept, are also reviewed for practical and economical hydrogen production.     

Continuous 3D Titanium Nitride Nanoshell Structure for Solar‐Driven Unbiased Biocatalytic CO2 Reduction

Z‐scheme‐inspired tandem photoelectrochemical (PEC) cells have received attention as a sustainable platform for solar‐driven CO₂ reduction. Here, continuously 3D‐structured, electrically conductive titanium nitride nanoshells (3D TiN) for biocatalytic CO₂‐to‐formate conversion in a bias‐free tandem PEC system are reported. The 3D TiN exhibits a periodically porous network with high porosity (92.1%) and conductivity (6.72 × 10⁴ S m^?1), which allows for high enzyme loading and direct electron transfer (DET) to the immobilized enzyme. It is found that the W‐containing formate dehydrogenase from Clostridium ljungdahlii (ClFDH) on the 3D TiN nanoshell is electrically activated through DET for CO₂ reduction. At a low overpotential of 40 mV, the 3D TiN‐ClFDH stably converts CO₂ to formate at a rate of 0.34 µmol h^?1 cm^?2 and a faradaic efficiency (FE) of 93.5%. Compared to a flat TiN‐ClFDH, the 3D TiN‐ClFDH shows a 58 times higher formate production rate (1.74 µmol h^?1 cm^?2) at 240 mV of overpotential. Lastly, a bias‐free biocatalytic tandem PEC cell that converted CO₂ to formate at an average rate of 0.78 µmol h^?1 and an FE of 77.3% only using solar energy and water is successfully assembled.     

Pseudocapacitive Charge Storage in Thick Composite MoS2 Nanocrystal‐Based Electrodes

A synthesis methodology is demonstrated to produce MoS₂ nanoparticles with an expanded atomic lamellar structure that are ideal for Faradaic‐based capacitive charge storage. While much of the work on MoS₂ focuses on the high capacity conversion reaction, that process is prone to poor reversibility. The pseudocapacitive intercalation‐based charge storage reaction of MoS₂ is investigated, which is extremely fast and highly reversible. A major challenge in the field of pseudocapacitive‐based energy storage is the development of thick electrodes from nanostructured materials that can sustain the fast inherent kinetics of the active nanocrystalline material. Here a composite electrode comprised of a poly(acrylic acid) binder, carbon fibers, and carbon black additives is utilized. These electrodes deliver a specific capacity of 90 mAh g^?1 in less than 20 s and can be cycled 3000 times while retaining over 80% of the original capacity. Quantitative kinetic analysis indicates that over 80% of the charge storage in these MoS₂ nanocrystals is pseudocapacitive. Asymmetric full cell devices utilizing a MoS₂ nanocrystal‐based electrode and an activated carbon electrode achieve a maximum power density of 5.3 kW kg^?1 (with 6 Wh kg^?1 energy density) and a maximum energy density of 37 Wh kg^?1 (with 74 W kg^?1power density).     

Biomimetic MXene Textures with Enhanced Light‐to‐Heat Conversion for Solar Steam Generation and Wearable Thermal Management

2D materials are of particular interest in light‐to‐heat conversion, yet challenges remain in developing a facile method to suppress their light reflection. Herein, inspired by the black scales of Bitis rhinoceros, a generalized approach via sequential thermal actuations to construct biomimetic 2D‐material nanocoatings, including Ti₃C₂T_x MXene, reduced graphene oxide (rGO), and molybdenum disulfide (MoS₂) is designed. The hierarchical MXene nanocoatings result in broadband light absorption (up to 93.2%), theoretically validated by optical modeling and simulations, and realize improved light‐to‐heat performance (equilibrium temperature of 65.4 °C under one‐sun illumination). With efficient light‐to‐heat conversion, the bioinspired MXene nanocoatings are next incorporated into solar steam‐generation devices and stretchable solar/electric dual‐heaters. The MXene steam‐generation devices require much lower solar‐thermal material loading (0.32 mg cm^?2) and still guarantee high steam‐generation performance (1.33 kg m^?2 h^?1) compared with other state‐of‐the‐art devices. Additionally, the mechanically deformed MXene structures enable the fabrication of stretchable and wearable heaters dual‐powered by sunlight and electricity, which are reversibly stretched and heated above 100 °C. This simple fabrication process with effective utilization of active materials promises its practical application value for multiple solar–thermal technologies.     

Drastic Layer‐Number‐Dependent Activity Enhancement in Photocatalytic H2 Evolution over nMoS2/CdS (n ≥ 1) Under Visible Light

Exploiting noble‐metal‐free cocatalysts is of huge interest for photocatalytic water splitting using solar energy. As an efficient cocatalyst in photocatalysis, MoS₂ is shown promise as a low‐cost alternative to Pt for hydrogen evolution. Here we report a systematical study on controlled synthesis of MoS₂ with layer number ranging from ≈1 to 112 and their activities for photocatalytic H₂ evolution over commercial CdS. A drastic increase in photocatalytic H₂ evolution is observed with decreasing MoS₂ layer number. Particularly for the single‐layer (SL) MoS₂, the SL‐MoS₂/CdS sample reaches a high H₂ generation rate of ≈2.01 × 10^?3m h^?1 in Na₂S–Na₂SO₃ solutions and ≈2.59 × 10^?3m h^?1 in lactic acid solutions, corresponding to an apparent quantum efficiency of 30.2% and 38.4% at 420 nm, respectively. In addition to the more exposed edges and unsaturated active S atoms, valence band–XPS and Mott–Schottky plots analysis indicate that the SL MoS₂ has the more negative conduction band energy level than the H⁺/H₂ potential, facilitating the hydrogen reduction.     

Simultaneous Cobalt and Phosphorous Doping of MoS2 for Improved Catalytic Performance on Polysulfide Conversion in Lithium–Sulfur Batteries

The lithium–sulfur batteries are susceptible to the loss of sulfur as dissolved polysulfides in the electrolyte and their ensuing redox shutting effect. The acceleration of the conversion kinetics of dissolved polysulfides into the insoluble sulfur and lithium sulfide via electrocatalysis has the appeal of being a root‐cause solution. MoS₂ is the most common electrocatalyst used for this purpose. It is demonstrated that how the effectiveness can be improved by simultaneous cobalt and phosphorus doping of MoS₂ nanotubes (P‐Mo_0.9Co_0.1S₂‐2, containing 1.81 at% of P). Cobalt doping induces the transformation of MoS₂ from 2H phase to metallic 1T phase, which improves the electrical conductivity of the MoS₂. The Co–P coordinated sites on the catalyst surface are highly active for the polysulfide conversion reactions. Consequently, a sulfur cathode with P‐Mo_0.9Co_0.1S₂‐2 can decrease the capacity fade rate from 0.28% per cycle before modification (over 150 cycles at 0.5C rate) to 0.046% per cycle after modification (over 600 cycles at 1C rate). P‐Mo_0.9Co_0.1S₂‐2 also enhances the high rate performance from a capacity of 338 to 931 mAh g^?1 at 6C rate. The results of this study provide the first direct evidence of the beneficial effects of heteroatom codoping of polysulfide conversion catalysts.     

Atomic‐Scale Visualization of Electrochemical Lithiation Processes in Monolayer MoS2 by Cryogenic Electron Microscopy

While lithium ion batteries with electrodes based on intercalation compounds have dominated the portable energy storage market for decades, the energy density of these materials is fundamentally limited. Today, rapidly growing demand for this type of energy storage is driving research into materials that utilize alternative reaction mechanisms to enable higher energy densities. Transition metal compounds are one such class of materials, with storage enabled by “conversion” reactions, where the material is converted to new compound upon lithiation. MoS₂ is one example of this type of material that has generated a large amount of interest recently due to its high theoretical lithium storage capacity compared to graphite. Here, cryogenic scanning transmission electron microscopy techniques are used to reveal the atomic‐scale processes that occur during reaction of a model monolayer MoS₂ system by enabling the unaltered atomic structure to be determined at various levels of lithiation. It is revealed that monolayer MoS₂ can undergo a conversion reaction even with no substrate, and that the resulting particles are smaller than those that form in bulk MoS₂, likely due to the more limited 2D diffusion. Additionally, while bilayer MoS₂ undergoes intercalation with a corresponding phase transition before conversion, monolayer MoS₂ does not.     

Triple‐Layer Structured Composite Separator Membranes with Dual Pore Structures and Improved Interfacial Contact for Sustainable Dye‐Sensitized Solar Cells

A composite separator membrane (CSM) with an A/B/A type layered structure, composed of a microporous electrolyte‐philic poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVdF‐HFP) gel layer (A) and a submicrometer porous polyethylene (PE) or a macroporous poly(ethylene terephthalate) (PET) non‐woven matrix (B), is introduced in a dye‐sensitized solar cell (DSSC). Commercially available PE and PET separator membranes (SMs) act as matrices that provide mechanical stability to the DSSC and permanent pore structures for facilitated ion transport. PVdF‐HFP is used as a microporous gelator for improved interfacial contact between the solid SM and the electrodes. The PVdF‐HFP gel impedes the charge recombination process between electron and I₃ ^? at the TiO₂/electrolyte interface, resulting in improved electron lifetimes. The DSSC assembled with the CSM exhibits high initial solar energy conversion efficiency (η, 6.1%) and stable η values over 1400 h, demonstrating good long term stability. The behaviors of the DSSC are attributed to the synergistic factors of the CSM, such as improved ion conductivity, electrolyte affinity, electrolyte retention capability, effective interfacial contact, and plausible passivation of the dyes. This study demonstrates a practical combination of short‐ and long‐term DSSC performance through the introduction of the CSM.     

H2‐Directing Strategy on In Situ Synthesis of Co‐MoS2 with Highly Expanded Interlayer for Elegant HER Activity and its Mechanism

MoS₂ has drawn great attention as a promising Pt‐substituting catalyst for the hydrogen evolution reaction (HER). This work utilizes H₂ as the structure directing agent (SDA) to in situ synthesize a range of Co‐MoS₂‐n (n = 0, 0.5, 1.0, 1.4, 2.0) with expanded interlayer spacings (d = 9.2 – 11.1 Å), which significantly boost their HER activities. The Co‐MoS₂‐1.4 with an interlayer spacing of 10.3 Å presents an extremely low overpotential of 56 mV (at 10 mA cm^?2) and a Tafel slope of 32 mV dec^?1, which is superior than most reported MoS₂‐based catalysts. Density function theory calculations are used to gain insights that i) the H₂ can be dissociatively adsorbed on MoS₂ and greatly affect the related surface free energy by regulating the interlayer spacing; ii) the expanded interlayer spacing can significantly decrease the absolute value of ΔG_H, thereby leading to greatly promoted HER activity. Additionally, the large amounts of 1T phase (73.9–79.2%) and Co‐Mo‐S active sites (40.9–91.3%) also contribute to the enhanced HER activity of the synthesized samples. Overall, a simple new strategy for in situ synthesis of Co‐MoS₂ with an expanded interlayer spacing is proposed, which sheds light on other 2D energy material designs.