A model predicting delivery of saquinavir in nanoparticles to human monocyte/macrophage (Mo/Mac) cells

Modeling the influence of a technology such as nanoparticle systems on drug delivery is beneficial in rational formulation design. While there are many studies showing drug delivery enhancement by nanoparticles, the literature provides little guidance regarding when nanoparticles are useful for delivery of a given drug. A model was developed predicting intracellular drug concentration in cultured cells dosed with nanoparticles. The model considered drug release from nanoparticles as well as drug and nanoparticle uptake by the cells as the key system processes. Mathematical expressions for these key processes were determined using experiments in which each process occurred in isolation. In these experiments, intracellular delivery of saquinavir, a low solubility drug dosed as a formulation of poly(ethylene oxide)-modified poly(epsilon- caprolactone) (PEO-PCL) nanoparticles, was studied in THP-1 human monocyte/macrophage (Mo/Mac) cells. The model accurately predicted the enhancement in intracellular concentration when drug was administered in nanoparticles compared to aqueous solution. This simple model highlights the importance of relative kinetics of nanoparticle uptake and drug release in determining overall enhancement of intracellular drug concentration when dosing with nanoparticles.     

Nanoparticles for drug delivery to the lungs

The lungs are an attractive route for non-invasive drug delivery with advantages for both systemic and local applications. Incorporating therapeutics with polymeric nanoparticles offers additional degrees of manipulation for delivery systems, providing sustained release and the ability to target specific cells and organs. However, nanoparticle delivery to the lungs has many challenges including formulation instability due to particle-particle interactions and poor delivery efficiency due to exhalation of low-inertia nanoparticles. Thus, novel methods formulating nanoparticles into the form of micron-scale dry powders have been developed. These carrier particles exhibit improved handling and delivery, while releasing nanoparticles upon deposition in the lungs. This review covers the development of nanoparticle formulations for pulmonary delivery as both individual nanoparticles and encapsulated within carrier particles.     

Uptake and metabolism of a dual fluorochrome Tat-nanoparticle in HeLa cells

The ability to use magnetic nanoparticles for cell tracking, or for the delivery of nanoparticle-based therapeutic agents, requires a detailed understanding of probe metabolism and transport. Here we report on the development and metabolism of a dual fluorochrome version of our tat-CLIO nanoparticle termed Tat(FITC)-Cy3.5-CLIO. The nanoparticle features an FITC label on the tat peptide and a Cy3.5 dye directly attached to the cross-linked coating of dextran. This nanoparticle was rapidly internalized by HeLa cells, labeling 100% of cells in 45 min, with the amount of label per cell increasing linearly with time up to 3 h. Cells loaded with nanoparticles for 1 h retained 40-60% of their FITC and Cy3.5 labels over a period of 72 h in label-free media. Over a period of 144 h, or approximately 3.5 cell divisions, the T2 spin-spin relaxation time of cells was not significantly changed, indicating retention of the iron oxide among the dividing cell population. Using confocal microscopy and unfixed cells, both dyes were nuclear and perinuclear (broadly cytoplasmic) after Tat(FITC)-Cy3.5-CLIO labeling. Implications of the rapid labeling and slow excretion of the Tat(FITC)-Cy3.5-CLIO nanoparticle are discussed for cell tracking and drug delivery applications.     

Superparamagnetic iron oxide nanoparticles as radiosensitizer via enhanced reactive oxygen species formation

Internalization of citrate-coated and uncoated superparamagnetic iron oxide nanoparticles by human breast cancer (MCF-7) cells was verified by transmission electron microscopy imaging. Cytotoxicity studies employing metabolic and trypan blue assays manifested their excellent biocompatibility. The production of reactive oxygen species in iron oxide nanoparticle loaded MCF-7 cells was explained to originate from both, the release of iron ions and their catalytically active surfaces. Both initiate the Fenton and Haber-Weiss reaction. Additional oxidative stress caused by X-ray irradiation of MCF-7 cells was attributed to the increase of catalytically active iron oxide nanoparticle surfaces.     

Alternating Magnetic Field-Responsive Hybrid Gelatin Microgels for Controlled Drug Release

Magnetically-responsive nano/micro-engineered biomaterials that enable a tightly controlled, on-demand drug delivery have been developed as new types of smart soft devices for biomedical applications. Although a number of magnetically-responsive drug delivery systems have demonstrated efficacies through either in vitro proof of concept studies or in vivo preclinical applications, their use in clinical settings is still limited by their insufficient biocompatibility or biodegradability. Additionally, many of the existing platforms rely on sophisticated techniques for their fabrications. We recently demonstrated the fabrication of biodegradable, gelatin-based thermo-responsive microgel by physically entrapping poly(N-isopropylacrylamide-co-acrylamide) chains as a minor component within a three-dimensional gelatin network. In this study, we present a facile method to fabricate a biodegradable drug release platform that enables a magneto-thermally triggered drug release. This was achieved by incorporating superparamagnetic iron oxide nanoparticles and thermo-responsive polymers within gelatin-based colloidal microgels, in conjunction with an alternating magnetic field application system.     

Magnetically controlled release of cisplatin from superparamagnetic starch nanoparticles

The present study involves a novel strategy for the preparation of superparamagnetic nanoparticles of crosslinked starch impregnated with homogeneously dispersed nanosized iron oxide. The nanoparticles were loaded with an anticancer drug ‘cisplatin’ and the drug release kinetics was investigated spectrophotometrically at physiological pH (7.4). The nanoparticles were characterized by Fourier transform infra red (FTIR) spectroscopy, transmission electron microscopy (TEM), X-ray diffraction and magnetization studies. The particle size of magnetic starch nanoparticles was found to lie in the range of 20-90 nm. The influence of factors like chemical composition of nanoparticles, pH and temperature of the release media and applied magnetic field was investigated on the release profiles of the drug. The prepared nanoparticles could provide a possible pathway for targeted and controlled delivery of anticancer drugs minimizing side effects and achieving higher efficacy.     

Intracellular heating of living cells through Néel relaxation of magnetic nanoparticles

Maghemite and cobalt ferrite anionic magnetic nanoparticles enter tumor cells and can be used as heat sources when exposed to a high-frequency magnetic field. Comparative studies of the two particles enable to unravel the magnetic heating mechanisms (Néel relaxation vs. Brown relaxation) responsible for the cellular temperature rise, and also to establish a simple model, adjusted to the experimental results, allowing to predict the intracellular heating efficiency of iron oxide nanoparticles. Hence, we are able to derive the best nanoparticle design for a given material with a view to intracellular hyperthermia-based applications.     

Chitosan-Modified PLGA Nanoparticles with Versatile Surface for Improved Drug Delivery

Shortage of functional groups on surface of poly(lactide-co-glycolide) (PLGA)-based drug delivery carriers always hampers its wide applications such as passive targeting and conjugation with targeting molecules. In this research, PLGA nanoparticles were modified with chitosan through physical adsorption and chemical binding methods. The surface charges were regulated by altering pH value in chitosan solutions. After the introduction of chitosan, zeta potential of the PLGA nanoparticle surface changed from negative charge to positive one, making the drug carriers more affinity to cancer cells. Functional groups were compared between PLGA nanoparticles and chitosan-modified PLGA nanoparticles. Amine groups were exhibited on PLGA nanoparticle surface after the chitosan modification as confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The modified nanoparticles showed an initial burst release followed by a moderate and sustained release profile. Higher percentage of drugs from cumulative release can be achieved in the same prolonged time range. Therefore, PLGA nanoparticles modified by chitosan showed versatility of surface and a possible improvement in the efficacy of current PLGA-based drug delivery system.     

pH-responsive micelles and vesicles nanocapsules based on polypeptide diblock copolymers

The self-assembly of well-defined polypeptide-based diblock copolymers into micelles and vesicles is presented. The stimuli-responsive behavior of polypeptides to pH and ionic strength is used to produce stimuli-responsive nanoparticles with controlled size and shape. Results focusing on micelles and vesicles obtained from polypeptide-based diblock copolymers that are particularly promising for biomedical applications are detailed by means of static and dynamic light scattering analysis, UV circular dichroism, NMR and small angle neutron scattering experiments. Also systems able to form vesicles with a narrow size distribution at basic and acid pH going through a single molecule intermediate state are presented. These nanoparticles are particularly interesting for encapsulation and delivery purpose at a controlled pH.     

Synthesis and toxicity characterization of carbon coated iron oxide nanoparticles with highly defined size distributions

Background

Iron oxide nanoparticles hold great promise for future biomedical applications. To this end numerous studies on iron oxide nanoparticles have been conducted. One aspect these studies reveal is that nanoparticle size and shape can trigger different cellular responses through endocytic pathways, cell viability and early apoptosis. However, systematic studies investigating the size dependence of iron oxide nanoparticles with highly defined diameters across multiple cells lines are not available yet.

Methods

Iron oxide nanoparticles with well-defined size distributions were prepared. All samples were thoroughly characterized and the cytotoxicity for four standard cell lines (HeLa Kyoto, human osteosarcoma (U2OS), mouse fibroblasts (NIH 3T3) and mouse macrophages (J7442)) where investigated.

Results

Our findings show that small differences in size distribution (ca. 10 nm) of iron oxide nanoparticles do not influence cytotoxicity, while uptake is size dependent. Cytotoxicity is dose-dependent. Broad distributions of nanoparticles are more easily internalized as compared to the narrow distributions for two of the cell lines tested (HeLa Kyoto and mouse macrophages (J7442)).

Conclusion

The data indicate that it is not feasible to probe changes in cytotoxicity within a small size range (10 nm). However, TEM investigations of the nanoparticles indicate that cellular uptake is size dependent.

General significance

The present work compares narrow and broad distributions for various samples of carbon-coated iron oxide nanoparticles. The data highlights that cells differentiate between nanoparticle sizes as indicated by differences in cellular uptake. This information provides valuable knowledge to better understand the interaction of nanoparticles and cells.     

Iron Oxide Nanoparticle Assisted Purification and Mass Spectrometry Based Proteolytic Mapping of Intact CD4+T Cells from Human Blood

Abstract

Iron oxide nanoparticles have been used for many years as clinical applications. We have developed a rapid immunoaffinity isolation method of CD4⁺T cells from a mixed cell population of human blood using iron oxide nanoparticles. Anti CD4-antibody has been attached to iron oxide nanoparticles after its surface modification. The antibody tagged iron oxide nanoparticle beads are simply incubated with the mixed cell population of human blood and CD4⁺T cells are purified using an external magnetic field. The purification level was checked by fluorescence microscopy and flow cytometry. The purified CD4⁺T cells were digested with trypsin with different time periods and the products were analyzed by MALDI-TOF mass spectrometry, without further fractionation or purification, to obtain its proteome pattern. A database search showed a number of peptide masses matched specific to T-cell peptide masses. These results indicate that iron oxide nanoparticles are useful for CD4⁺T cell purification, and mass spectrometry based proteolytic fingerprint is simple and swift for identifying putative surface biomarkers from the whole cell surfaces.     

涡旋磁纳米颗粒——崭新的生物医用磁性纳米平台

相比于超顺磁性纳米颗粒,具有涡旋磁畴的磁性纳米颗粒,由于独特的磁化闭合分布、较大的粒径尺寸及外加磁场中的磁化翻转特性,使得其兼具弱的颗粒间磁相互作用和更优异的磁学性能,在生物医学领域展现出了更好的应用优势和潜力.本综述结合近年来国内外对涡旋磁畴的研究及涡旋磁纳米颗粒在生物医学领域的报道,提出了一类新型的生物医用涡旋磁溶胶体系,并以涡旋磁氧化铁纳米盘和纳米环为例,介绍了涡旋磁纳米颗粒的化学合成,并着重论述了这类具有独特涡旋畴结构的纳米颗粒在磁共振成像、抗肿瘤治疗等生物医学应用上的最新研究进展.     

Temperature-Tunable Iron Oxide Nanoparticles for Remote-Controlled Drug Release

Herein, we report the successful development of a novel nanosystem capable of an efficient delivery and temperature-triggered drug release specifically aimed at cancer. The water-soluble 130.1 ± 0.2 nm iron oxide nanoparticles (IONPs) were obtained via synthesis of a monodispersed iron oxide core stabilized with tetramethylammonium hydroxide pentahydrate (TMAOH), followed by coating with the thermoresponsive copolymer poly-(NIPAM-stat-AAm)-block-PEI (PNAP). The PNAP layer on the surface of the IONP undergoes reversible temperature-dependent structural changes from a swollen to a collapsed state resulting in the controlled release of anticancer drugs loaded in the delivery vehicle. We demonstrated that the phase transition temperature of the prepared copolymer can be precisely tuned to the desired value in the range of 36°C–44°C by changing the monomers ratio during the preparation of the nanoparticles. Evidence of modification of the IONPs with the thermoresponsive copolymer is proven by ATR-FTIR and a quantitative analysis of the polymeric and iron oxide content obtained by thermogravimetric analysis. When loaded with doxorubicin (DOX), the IONPs-PNAP revealed a triggered drug release at a temperature that is a few degrees higher than the phase transition temperature of a copolymer. Furthermore, an in vitro study demonstrated an efficient internalization of the nanoparticles into the cancer cells and showed that the drug-free IONPs-PNAP were nontoxic toward the cells. In contrast, sufficient therapeutic effect was observed for the DOX-loaded nanosystem as a function of temperature. Thus, the developed temperature-tunable IONPs-based delivery system showed high potential for remotely triggered drug delivery and the eradication of cancer cells.

Electronic supplementary material

The online version of this article (doi:10.1208/s12249-014-0131-x) contains supplementary material, which is available to authorized users.KEY WORDS: drug delivery, IONPs, remote-triggered drug release, thermoresponsive copolymer, tunable LCST     

Toxicity Assessment of Iron Oxide Nanoparticles in Zebrafish (Danio rerio) Early Life Stages

Iron oxide nanoparticles have been explored recently for their beneficial applications in many biomedical areas, in environmental remediation, and in various industrial applications. However, potential risks have also been identified with the release of nanoparticles into the environment. To study the ecological effects of iron oxide nanoparticles on aquatic organisms, we used early life stages of the zebrafish (Danio rerio) to examine such effects on embryonic development in this species. The results showed that ≥10 mg/L of iron oxide nanoparticles instigated developmental toxicity in these embryos, causing mortality, hatching delay, and malformation. Moreover, an early life stage test using zebrafish embryos/larvae is also discussed and recommended in this study as an effective protocol for assessing the potential toxicity of nanoparticles. This study is one of the first on developmental toxicity in fish caused by iron oxide nanoparticles in aquatic environments. The results will contribute to the current understanding of the potential ecotoxicological effects of nanoparticles and support the sustainable development of nanotechnology.     

Controlled release of bioactive agents

The use of polymer carriers for the controlled release of bioactive agents including polypeptides is discussed. This paper reviews release mechanisms from polymers, examines applications of these systems, explores approaches to control drug delivery in response to physiological needs, and discusses the impact of controlled drug release with respect to biotechnology.     

Polymer actuator valves toward controlled drug delivery application

A novel controlled drug delivery system in which drug release is achieved by electrochemically actuating an array of polymeric valves on a set of drug reservoirs has been developed. The valves are bilayer structures, made in shape of a flap hinged on one side to a valve seat, consisting of thin films of evaporated gold and electrochemically deposited polypyrrole (PPy). Drugs (dry or wet) were pre-stored in an array of these reservoirs and their release is accomplished by bending the bilayer flaps away from the substrate with a small applied bias. In vitro color dye release experiment has been conducted. Seventy-five percent less energy consumption was achieved with this bilayer polymer valve design to open a same size reservoir compared to metal-corrosion based valves. Complex release patterns such as multiple drug pulsatile release and continuous linear release have been successfully implemented through flexible control of valve actuation sequence. These valves can be actuated under closed-loop-control of sensors responding to a specific biological or environmental stimulus, leading to potential applications in advanced responsive drug delivery systems.     

Polymer-based stimuli-responsive nanosystems for biomedical applications

The application of organic polymers and inorganic/organic hybrid systems in numerous fields of biotechnology has seen a considerable growth in recent years. Typically, organic polymers with diverse structures, compositional variations and differing molecular weights have been utilized to assemble polymeric nanosystems such as polymeric micelles, polymersomes, and nanohydrogels with unique features and structural properties. The architecture of these polymeric nanosystems involves the use of both hydrophobic and hydrophilic polymeric blocks, making them suitable as vehicles for diagnostic and therapeutic applications. Recently, “smart” or “intelligent” polymers have attracted significant attention in the biomedical field wherein careful introduction of specific polymeric modalities changes a banal polymeric nanosystem to an advanced stimuli-responsive nanosystem capable of performing extraordinary functions in response to an internal or external trigger such as pH, temperature, redox, enzymes, light, magnetic, or ultrasound. Further, incorporation of inorganic nanoparticles such as gold, silica, or iron oxide with surface-bound stimuli-responsive polymers offers additional advantages and multifunctionality in the field of nanomedicine. This review covers the physical properties and applications of both organic and organic/inorganic hybrid nanosystems with specific recent breakthroughs in drug delivery, imaging, tissue engineering, and separations and provides a brief discussion on the future direction.     

Synthesis and in vitro evaluation of carboxymethyl starch-chitosan nanoparticles as drug delivery system to the colon

The purpose of this study was to examine chitosan (CS)-carboxymethyl starch (CMS) nanoparticles as drug delivery system to the colon. The 5-aminosalicylic acid (5-ASA) was chosen as model drug molecule. CS-CMS nanoparticles were formulated by a complex coacervation process under mild conditions. The influence of process variables, including the two ionic polymers, on particle size, and nanoparticles entrapment of 5-ASA was studied. In vitro release of 5-ASA was also evaluated, and the integrity of 5-ASA in the release fraction was assessed using sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The release of 5-ASA from nanoparticle was based on the ion-exchange mechanism. The CS-CMS nanoparticles developed based on the modulation of ratio show promise as a system for controlled delivery of drug to the colon.     

Nanovectors for anticancer agents based on superparamagnetic iron oxide nanoparticles

During the last decade, the application of nanotechnologies for anticancer drug delivery has been extensively explored, hoping to improve the efficacy and to reduce side effects of chemotherapy. The present review is dedicated to a certain kind of anticancer drug nanovectors developed to target tumors with the help of an external magnetic field. More particularly, this work treats anticancer drug nanoformulations based on superparamagnetic iron oxide nanoparticles coated with biocompatible polymers. The major purpose is to focus on the specific requirements and technological difficulties related to controlled delivery of antitumoral agents. We attempt to state the problem and its possible perspectives by considering the three major constituents of the magnetic therapeutic vectors: iron oxide nanoparticles, polymeric coating and anticancer drug.