Hydroxyapatite/regenerated silk fibroin scaffold-enhanced osteoinductivity and osteoconductivity of bone marrow-derived mesenchymal stromal cells

A novel hydroxyapatite/regenerated silk fibroin scaffold was prepared and investigated for its potential to enhance both osteoinductivity and osteoconductivity of bone marrow-derived mesenchymal stromal cells in vitro. Approx. 12.4 ± 0.06 % (w/w) hydroxyapatite was deposited onto the scaffold, and cell viability and DNA content were significantly increased (18.5 ± 0.6 and 33 ± 1.2 %, respectively) compared with the hydroxyapatite scaffold after 14 days. Furthermore, alkaline phosphatase activity in the novel scaffold increased 41 ± 2.5 % after 14 days compared with the hydroxyapatite scaffold. The data indicate that this novel hydroxyapatite/regenerated silk fibroin scaffold has a positive effect on osteoinductivity and osteoconductivity, and may be useful for bone tissue engineering.     

Effect of Biotin and Galactose Functionalized Gelatin Nanofiber Membrane on HEp-2 Cell Attachment and Cytotoxicity

In the present study, we prepared a gelatin nanofiber matrix using an electrospinning technique and cross-linked the nanofibers with 10 % glutaraldehyde vapors. The insoluble nanofibers were functionalized with bioactive molecules like biotin (1 %) and galactose (1 %) by adsorption and coelectrospinning. Surface morphology and fiber dimension were analyzed using atomic force microscopy. The amounts of biotin and galactose bound to the nanofibers before and after adsorption were quantified using high-performance liquid chromatography. Human larynx carcinoma (HEp-2) cell attachment, morphology and cytotoxic characteristics were studied using crystal violet staining and the MTT assay. Cell attachment and viability were highest in biotin- and galactose-embedded nanofibers compared to native nanofibers. Cytotoxicity was less with biotin- and galactose-embedded and adsorbed nanofibers compared to control nanofibers. Hence, we suggest that these biocompatible, nontoxic, biodegradable, functionalized nanofibers could be a potential candidate for application in tissue engineering and scaffold preparation.     

Mechano-Transduction Signals Derived from Self-Assembling Peptide Nanofibers Containing Long Motif of Laminin Influence Neurogenesis in In-Vitro and In-Vivo

Astroglial scaring and limited neurogenesis are two problematic issues in recovery of spinal cord injury (SCI). In the meantime, it seems that mechanical manipulations of scaffold to inhibit astroglial scarring and improve neurogenesis is worthy of value. In the present investigation, the effect of nanofiber (gel) concentration as a mechanical-stimuli in neurogenesis was investigated. Cell viability, membrane damage, and neural differentiation derived from endometrial stem cells encapsulated into self-assembling peptide nanofiber containing long motif of laminin were assessed. Then, two of their concentrations that had no significant difference of neural differentiation potential were selected for motor neuron investigation in SCI model of rat. MTT assay data showed that nanofibers at the concentrations of 0.125 and 0.25 % w/v induced higher and less cell viability than others, respectively, while cell viability derived from higher concentrations of 0.25 % w/v had ascending trend. Gene expression results showed that noggin along with laminin motif over-expressed TH gene and the absence of noggin or laminin motif did not in all concentrations. Bcl₂ over-expression is concomitant with the decrease of nanofiber stiffness, NF⁺ cells increment, and astrogenesis inhibition and dark neuron decrement in SCI model. It seems that stiffness affects on Bcl₂ gene expression and may through β-Catenin/Wnt signaling pathway and BMP-4 inhibition decreases astrogenesis and improves neurogenesis. However, stiffness had a significant effect on upregulation of GFAP⁺ cells and motor neuron recovery in in vivo. It might be concluded that eventually there is a critical definitive point concentration that at less or higher than of it changes cell behavior and neural differentiation through different molecular pathways.     

Improvement of biomaterials used in tissue engineering by an ageing treatment

Biomaterials based on crosslinked sponges of biopolymers have been extensively used as scaffolds to culture mammal cells. It is well known that single biopolymers show significant change over time due to a phenomenon called physical ageing. In this research, it was verified that scaffolds used for skin tissue engineering (based on gelatin, chitosan and hyaluronic acid) express an ageing-like phenomenon. Treatments based on ageing of scaffolds improve the behavior of skin-cells for tissue engineering purposes. Physical ageing of dry scaffolds was studied by differential scanning calorimetry and was modeled with ageing kinetic equations. In addition, the physical properties of wet scaffolds also changed with the ageing treatments. Scaffolds were aged up to 3 weeks, and then skin-cells (fibroblasts) were seeded on them. Results indicated that adhesion, migration, viability, proliferation and spreading of the skin-cells were affected by the scaffold ageing. The best performance was obtained with a 2-week aged scaffold (under cell culture conditions). The cell viability inside the scaffold was increased from 60 % (scaffold without ageing treatment) to 80 %. It is concluded that biopolymeric scaffolds can be modified by means of an ageing treatment, which changes the behavior of the cells seeded on them. The ageing treatment under cell culture conditions might become a bioprocess to improve the scaffolds used for tissue engineering and regenerative medicine.     

Polymeric vs hydroxyapatite-based scaffolds on dental pulp stem cell proliferation and differentiation

AIM: To evaluate adhesion, proliferation and differentiation of human dental pulp stem cells (hDPSCs) on four commercially available scaffold biomaterials.METHODS: hDPSCs were isolated from human dental pulp tissues of extracted wisdom teeth and established in stem cell growth medium. hDPSCs at passage 3-5 were seeded on four commercially available scaffold biomaterials, SureOss (Allograft), Cerabone (Xenograft), PLLA (Synthetic), and OSTEON II Collagen (Composite), for 7 and 14 d in osteogenic medium. Cell adhesion and morphology to the scaffolds were evaluated by scanning electron microscopy (SEM). Cell proliferation and differentiation into osteogenic lineage were evaluated using DNA counting and alkaline phosphatase (ALP) activity assay, respectively.RESULTS: All scaffold biomaterials except SureOss (Allograft) supported hDPSC adhesion, proliferation and differentiation. hDPSCs seeded on PLLA (Synthetic) scaffold showed the highest cell proliferation and attachment as indicated with both SEM and DNA counting assay. Evaluating the osteogenic differentiation capability of hDPSCs on different scaffold biomaterials with ALP activity assay showed high level of ALP activity on cells cultured on PLLA (Synthetic) and OSTEON II Collagen (Composite) scaffolds. SEM micrographs also showed that in the presence of Cerabone (Xenograft) and OSTEON II Collagen (Composite) scaffolds, the hDPSCs demonstrated the fibroblastic phenotype with several cytoplasmic extension, while the cells on PLLA scaffold showed the osteoblastic-like morphology, round-like shape.CONCLUSION: PLLA scaffold supports adhesion, proliferation and osteogenic differentiation of hDPSCs. Hence, it may be useful in combination with hDPSCs for cell-based reconstructive therapy.     

Chitosan nanofiber scaffold enhances hepatocyte adhesion and function

To enhance cell attachment and promote liver functions of hepatocytes cultured in bioreactors, a chitosan nanofiber scaffold was designed and prepared via electrospinning. Effects of the scaffold on hepatocyte adhesion, viability and function were then investigated. Data showed that hepatocytes on chitosan nanofiber scaffold exhibited better viability and tighter cell-substrate contact than cells on regular chitosan film. In addition, urea synthesis, albumin secretion and cytochrome P450 activity of hepatocytes on chitosan nanofiber scaffold were all 1.5 to 2 folds higher than the controls. Glycogen synthesis was also increased as compared with the controls. These results suggested the potential application of this chitosan nanofiber scaffold as a suitable substratum for hepatocyte culturing in bioreactors.     

Assessment of Spirulina-PCL nanofiber for the regeneration of dermal fibroblast layers

Skin is a barrier which protects injured tissues, and thus, skin regeneration is one of many important medical issues. Tissue engineering is an attractive approach to make artificial tissue or regenerate lost tissues. While constituting artificial tissues, cells must infiltrate through scaffolds, maintaining viability and proliferation. However, a three-dimensional tissue culture involves stressful environments due to several reasons such as mass or gas transport and high cell density. Once stressed, cells produce reactive oxygen species, resulting in alleviating cellular viability and activity. Spirulina is well known to have antioxidant molecules, which have been known to modulate oxidative stress to cells. Electrospun nanofiber has widely been used as a scaffold to mimic natural extracellular matrix. In this research, we assessed Spirulina extract-imbedded nanofiber as a scaffold for an artificial skin tissue. Spirulina extract was proven to positively affect viability and proliferation of mouse fibroblasts. In addition, fibroblasts infiltrated through Spirulina extract-imbedded electrospun nanofiber without cytotoxicity.     

Preparation of electrospun core–sheath yarn with enhanced bioproperties for biomedical materials

Objectives

To create a multifunctional medical material that combines the advantages of both nanofibers and macroyarns.

Results

A novel electrospinning-based approach was developed for creating polycaprolactone (PCL) nanofiber covered yarns (PCL-NCYs) in which polyglycolic acid multi-strand filaments (PGA-MFs) were used as the core. BALB/3T3 (mouse embryonic fibroblast cell line) cells were cultured on the PCL-NCYs substrate and cell morphology and proliferation were determined by methylthiazol tetrazolium (MTT) assay. Compared with PGA-MFs, PCL-NCYs had a higher porosity and tensile strength of 88 ± 8% and 348 ± 16 MPa and in particular, the porosity was four times higher. BALB/3T3 cells attached more easily onto the nanofiber structure and proliferated along the direction of nanofibers, indicating that PCL-NCYs can achieve better cell differentiation and proliferation.

Conclusions

PCL-NCYs can be created by combining electrospinning covering and textile twisting, and have better mechanical property and higher porosity, and can be used as a novel scaffold in tissue engineering.

     

Structural characteristics and biological performance of silk fibroin nanofiber containing microalgae spirulina extract

Silk fibroin (SF) nanofiber scaffold containing microalgae Spirulina extract were prepared by electrospinning and the performance and functionality of the scaffold were evaluated. The viscosity and conductivity of the dope solution of Spirulina containing SF were examined for electrospinability and we found that the morphological structure of SF nanofiber is affected by the concentration of Spirulina extract added. The platelet adhesion and coagulation time test confirmed that the Spirulina containing SF nanofiber scaffold had excellent ability to prevent blood clotting or antithrombogenicity that is comparable to heparin. Low cytotoxicity and excellent cell adhesion and proliferation were also observed for Sprulina containing SF nanofiber scaffold by methylthiazolyldiphenyl‐tetrazolium bromide assay and confocal fluorescence microscope using fibroblast and human umbilical vein endothelial cells. Based on these results, we believe SF nanofiber scaffold containing Spirulina extract has the potential to be used as tissue engineering scaffold that requires high hemocompatibility. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 307–318, 2014.     

Hepatic differentiation from human mesenchymal stem cells on a novel nanofiber scaffold

The emerging fields of tissue engineering and biomaterials have begun to provide potential treatment options for liver failure. The goal of the present study is to investigate the ability of a poly L-lactic acid (PLLA) nanofiber scaffold to support and enhance hepatic differentiation of human bone marrow-derived mesenchymal stem cells (hMSCs). A scaffold composed of poly L-lactic acid and collagen was fabricated by the electrospinning technique. After characterizing isolated hMSCs, they were seeded onto PLLA nanofiber scaffolds and induced to differentiate into a hepatocyte lineage. The mRNA levels and protein expression of several important hepatic genes were determined using RT-PCR, immunocytochemistry and ELISA. Flow cytometry revealed that the isolated bone marrow-derived stem cells were positive for hMSC-specific markers CD73, CD44, CD105 and CD166 and negative for hematopoietic markers CD34 and CD45. The differentiation of these stem cells into adipocytes and osteoblasts demonstrated their multipotency. Scanning electron microscopy showed adherence of cells in the nanofiber scaffold during differentiation towards hepatocytes. Our results showed that expression levels of liver-specific markers such as albumin, α-fetoprotein, and cytokeratins 8 and 18 were higher in differentiated cells on the nanofibers than when cultured on plates. Importantly, liver functioning serum proteins, albumin and α-1 antitrypsin were secreted into the culture medium at higher levels by the differentiated cells on the nanofibers than on the plates, demonstrating that our nanofibrous scaffolds promoted and enhanced hepatic differentiation under our culture conditions. Our results show that the engineered PLLA nanofibrous scaffold is a conducive matrix for the differentiation of MSCs into functional hepatocyte-like cells. This represents the first step for the use of this nanofibrous scaffold for culture and differentiation of stem cells that may be employed for tissue engineering and cell-based therapy applications.     

Effects of low-intensity pulsed ultrasound on cell viability, proliferation and neural differentiation of induced pluripotent stem cells-derived neural crest stem cells

Low-intensity pulsed ultrasound (LIPUS) acting on induced pluripotent stem cells–derived neural crest stem cells (iPSCs–NCSCs) is considered a promising therapy to improve the efficacy of injured peripheral nerve regeneration. Effects of LIPUS on cell viability, proliferation and neural differentiation of iPSCs–NCSCs were examined respectively in this study. LIPUS at 500 mW cm^?2 enhanced the viability and proliferation of iPSCs–NCSCs after 2 days and, after 4 days, up-regulated gene and protein expressions of NF-M, Tuj1, S100β and GFAP in iPSCs–NCSCs whereas after 7 days expression of only NF-M, S100β and GFAP were up-regulated. LIPUS treatment at an appropriate intensity can, therefore, be an efficient and cost-effective method to enhance cell viability, proliferation and neural differentiation of iPSCs–NCSCs in vitro for peripheral nerve tissue engineering.     

Supportive properties of basement membrane layer of human amniotic membrane enable development of tissue engineering applications

Human amniotic membrane (HAM) has been widely used as a natural scaffold in tissue engineering due to many of its unique biological properties such as providing growth factors, cytokines and tissue inhibitors of metalloproteinases. This study aimed at finding the most suitable and supportive layer of HAM as a delivery system for autologous or allogeneic cell transplantation. Three different layers of HAM were examined including basement membrane, epithelial and stromal layers. In order to prepare the basement membrane, de-epithelialization was performed using 0.5 M NaOH and its efficiency was investigated by histological stainings, DNA quantification, biomechanical testing and electron microscopy. Adipose-derived stromal cells (ASCs) and a human immortalized keratinocyte cell line (HaCaT) were seeded on the three different layers of HAM and cultured for 3 weeks. The potential of the three different layers of HAM to support the attachment and viability of cells were then monitored by histology, electron microscopy and (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Moreover, mechanical strengths of the basement membrane were assessed before and after cell culture. The results indicated that the integrity of extra cellular matrix (ECM) components was preserved after de-epithelialization and resulted in producing an intact basement amniotic membrane (BAM). Moreover, all three layers of HAM could support the attachment and proliferation of cells with no visible cytotoxic effects. However, the growth and viability of both cell types on the BAM were significantly higher than the other two layers. We conclude that growth stimulating effectors of BAM and its increased mechanical strength after culturing of ASCs, besides lack of immunogenicity make it an ideal model for delivering allogeneic cells and tissue engineering applications.     

Combined effects of chemical priming and mechanical stimulation on mesenchymal stem cell differentiation on nanofiber scaffolds

Functional tissue engineering of connective tissues such as the anterior cruciate ligament (ACL) remains a significant clinical challenge, largely due to the need for mechanically competent scaffold systems for grafting, as well as a reliable cell source for tissue formation. We have designed an aligned, polylactide-co-glycolide (PLGA) nanofiber-based scaffold with physiologically relevant mechanical properties for ligament regeneration. The objective of this study is to identify optimal tissue engineering strategies for fibroblastic induction of human mesenchymal stem cells (hMSC), testing the hypothesis that basic fibroblast growth factor (bFGF) priming coupled with tensile loading will enhance hMSC-mediated ligament regeneration. It was observed that compared to the unloaded, as well as growth factor-primed but unloaded controls, bFGF stimulation followed by physiologically relevant tensile loading enhanced hMSC proliferation, collagen production and subsequent differentiation into ligament fibroblast-like cells, upregulating the expression of types I and III collagen, as well as tenasin-C and tenomodulin. The results of this study suggest that bFGF priming increases cell proliferation, while mechanical stimulation of the hMSCs on the aligned nanofiber scaffold promotes fibroblastic induction of these cells. In addition to demonstrating the potential of nanofiber scaffolds for hMSC-mediated functional ligament tissue engineering, this study yields new insights into the interactive effects of chemical and mechanical stimuli on stem cell differentiation.     

Basic fibroblast growth factor-loaded, mineralized biopolymer-nanofiber scaffold improves adhesion and proliferation of rat mesenchymal stem cells

Nanofibrous matrices are attractive scaffolding platforms for tissue regeneration. Modification of the nanofiber surface, particularly with biological proteins, improves cellular interactions. Here, we loaded basic fibroblast growth factor (bFGF) onto mineralized nanofibers and investigated the effect on adhesion and proliferation of rat mesenchymal stem cells. bFGF loading was significantly higher on the mineralized nanofiber than on the non-mineralized one. Release of bFGF from the mineralized nanofibers was continuous over 2 weeks. Cells cultured on the bFGF-loaded nanofiber attached and proliferated in significantly higher numbers than those on the bFGF-free nanofiber. bFGF-receptor inhibition study confirmed the biological role played by the loaded bFGF. This study details the advantages of the mineralized nanofiber surface for the loading and delivery bFGF, and thus the bFGF-loaded nanofiber scaffold may be useful for tissue repair and regeneration.     

Stathmin inhibits proliferation and differentiation of dental pulp stem cells via sonic hedgehog/Gli

The mineralization of dental pulp stem cells is an important factor in the tissue engineering of teeth, but the mechanism is not yet obvious. This study aimed to identify the effect of Stathmin on the proliferation and osteogenic/odontoblastic differentiation of human dental pulp stem cells (hDPSCs) and to explore whether the Shh signalling pathway was involved in this regulation. First, Stathmin was expressed in the cytoplasm and on the cell membranes of hDPSCs by cell immunofluorescence. Then, by constructing a lentiviral vector, the expression of Stathmin in hDPSCs was inhibited. Treatment with Stathmin shRNA (shRNA‐Stathmin group) inhibited the ability of hDPSCs to proliferate, as demonstrated by a CCK8 assay and flow cytometry analysis, and suppressed the osteogenic/odontoblastic differentiation ability, as demonstrated by alizarin red S staining and osteogenic/odontoblastic differentiation‐related gene (ALP, BSP, OCN, DSPP) activity, compared to that of hDPSCs from the control shRNA group. Molecular analyses showed that the Shh/GLI1 signalling pathway was inhibited when Stathmin was silenced, and purmorphamine, the Shh signalling pathway activator, was added to hDPSCs in the shRNA‐Stathmin group, real‐time PCR and Western blotting confirmed that expression of Shh and its downstream signalling molecules PTCH1, SMO and GLI1 increased significantly. After activating the Shh signalling pathway, the proliferation of hDPSCs increased markedly, as demonstrated by a CCK8 assay and flow cytometry analysis; osteogenic/odontoblastic differentiation‐related gene (ALP, BSP, OCN, DSPP) expression also increased significantly. Collectively, these findings firstly revealed that Stathmin‐Shh/GLI1 signalling pathway plays a positive role in hDPSC proliferation and osteogenic/odontoblastic differentiation.     

Preparation and Characterization of Electrospun PLCL/Poloxamer Nanofibers and Dextran/Gelatin Hydrogels for Skin Tissue Engineering

In this study, two different biomaterials were fabricated and their potential use as a bilayer scaffold for skin tissue engineering applications was assessed. The upper layer biomaterial was a Poly(ε-caprolactone-co-lactide)/Poloxamer (PLCL/Poloxamer) nanofiber membrane fabricated using electrospinning technology. The PLCL/Poloxamer nanofibers (PLCL/Poloxamer, 9/1) exhibited strong mechanical properties (stress/strain values of 9.37±0.38 MPa/187.43±10.66%) and good biocompatibility to support adipose-derived stem cells proliferation. The lower layer biomaterial was a hydrogel composed of 10% dextran and 20% gelatin without the addition of a chemical crosslinking agent. The 5/5 dextran/gelatin hydrogel displayed high swelling property, good compressive strength, capacity to present more than 3 weeks and was able to support cells proliferation. A bilayer scaffold was fabricated using these two materials by underlaying the nanofibers and casting hydrogel to mimic the structure and biological function of native skin tissue. The upper layer membrane provided mechanical support in the scaffold and the lower layer hydrogel provided adequate space to allow cells to proliferate and generate extracellular matrix. The biocompatibility of bilayer scaffold was preliminarily investigated to assess the potential cytotoxicity. The results show that cell viability had not been affected when cocultured with bilayer scaffold. As a consequence, the bilayer scaffold composed of PLCL/Poloxamer nanofibers and dextran/gelatin hydrogels is biocompatible and possesses its potentially high application prospect in the field of skin tissue engineering.     

Gangliosides are involved in neural differentiation of human dental pulp-derived stem cells

Human dental pulp-derived stem cells (hDPSCs) have been considered alternative sources of adult stem cells because of their potential to differentiate into multiple cell lineages. This study investigated the possible role of gangliosides in the neural differentiation of hDPSCs. When hDPSCs were cultured under neural differentiation conditions, expression of neural cell marker genes such as Nestin, MAP-2, and NeuN was detected. Immunostaining and high-performance thin-layer chromatography analysis showed that an increase in ganglioside biosynthesis was associated with neural differentiation of hDPSCs. Specifically, a significant increase in GD3 and GD1a expression was observed during neural differentiation. To confirm the role of gangliosides in neural differentiation, ganglioside biosynthesis was inhibited in hDPSCs by knockdown of UDP-glucose ceramide glucosyltransferase (Ugcg), which prevented differentiation into neural cells. These results suggest that gangliosides may play a role in the neural differentiation process of hDPSCs.     

The effect of mechanical loading on osteogenesis of human dental pulp stromal cells in a novel in vitro model

Tooth loss often results in alveolar bone resorption because of lack of mechanical stimulation. Thus, the mechanism of mechanical loading on stem cell osteogenesis is crucial for alveolar bone regeneration. We have investigated the effect of mechanical loading on osteogenesis in human dental pulp stromal cells (hDPSCs) in a novel in vitro model. Briefly, 1?×?10⁷ hDPSCs were seeded into 1 ml 3 % agarose gel in a 48-well-plate. A loading tube was then placed in the middle of the gel to mimic tooth-chewing movement (1 Hz, 3?×?30 min per day, n?=?3). A non-loading group was used as a control. At various time points, the distribution of live/dead cells within the gel was confirmed by fluorescence markers and confocal microscopy. The correlation and interaction between the factors (e.g. force, time, depth and distance) were statistically analysed. The samples were processed for histology and immunohistochemistry. After 1–3 weeks of culture in the in-house-designed in vitro bioreactor, fluorescence imaging confirmed that additional mechanical loading increased the viable cell numbers over time as compared with the control. Cells of various phenotypes formed different patterns away from the reaction tube. The cells in the middle part of the gel showed enhanced alkaline phosphatase staining at week 1 but reduced staining at weeks 2 and 3. Additional loading enhanced Sirius Red and type I collagen staining compared with the control. We have thus successfully developed a novel in-house-designed in vitro bioreactor mimicking the biting force to enhance hDPSC osteogenesis in an agarose scaffold and to promote bone formation and/or prevent bone resorption.