Synthesis and NMR characterization of the novel mixed-ligand Pt(II) complexes cis- and trans-Pt(Ypy)(pyrimidine)Cl2 and trans,trans-Cl2(Ypy)Pt(μ-pyrimidine)Pt(Ypy)Cl2 (Ypy = pyridine derivative)

Mixed-ligand complexes of the type cis- and trans-Pt(Ypy)(pm)Cl₂ where Ypy = pyridine derivative and pm = pyrimidine were synthesized and characterized by IR spectroscopy and by multinuclear (¹⁹⁵Pt, ¹H and ¹³C) magnetic resonance spectroscopy. The cis compounds were prepared from the reaction of K[Pt(Ypy)Cl₃] with pyrimidine (1:1 proportion) in water, while most of the trans isomers were synthesized from the isomerization of the cis compounds. The cis isomers could not be isolated with the Ypy ligands containing two -CH₃ groups in ortho positions. When the aqueous reaction of K[Pt(Ypy)Cl₃] with pyrimidine was performed in a Pt:pm ratio = 2:1, the pyrimidine-bridged dinuclear species were formed. Only the most stable trans-trans isomers could be isolated pure. In IR spectroscopy, the cis monomers showed two ν(Pt-Cl) bands, while the trans monomers and dimers showed only one ν(Pt-Cl) band. The ¹⁹⁵Pt NMR signals of the cis monomers were found at slightly higher fields than those of the corresponding trans isomers. The δ(¹⁹⁵Pt) of the dimers were found close to those of the trans monomers. The NMR results were interpreted in relation to the solvent effect, which seems important in these complexes. The coupling constants J(¹⁹⁵Pt-¹H) and J(¹⁹⁵Pt-¹³C) are larger in the cis geometry. The crystal structures of the compounds cis-Pt(2,4-lut)(pm)Cl₂, trans-Pt(2,6-lut)(pm)Cl₂ and trans,trans-Cl₂(2,6-lut)Pt(μ-pm)Pt(Ypy)Cl₂ were studied by X-ray diffraction methods and the results have confirmed the configurations suggested by IR and NMR spectroscopies.     

Pyrazine-bridged Pt(II)-sulfoxide complexes: multinuclear magnetic resonance spectroscopy and crystal structures of trans,trans-{Pt(R2SO)Cl2}2(μ-pyrazine)

A new type of pyrazine-bridged platinum(II) complexes, trans,trans-Pt(R₂SO)Cl₂(μ-pyrazine)Pt(R₂SO)Cl₂ was synthesized and characterized mainly by IR and multinuclear magnetic resonance spectroscopies (¹H, ¹³C and ¹⁹⁵Pt) and by crystallographic methods. Compounds with dimethylsulfoxide, tetramethylenesulfoxide, di-n-propylsulfoxide, di-n-butylsulfoxide, dibenzylsulfoxide and diphenylsulfoxide were prepared. The compounds were synthezised in good yields from the aqueous reaction of K[Pt(R₂SO)Cl₃] with pyrazine. IR spectroscopy showed only one ν(Pt-Cl) band suggesting trans isomers. The ¹⁹⁵Pt NMR signals of the dimeric species were observed between −3041 and −3113 ppm. The resonance of the diphenylsulfoxide complex was found at higher fields than the other compounds. In ¹H NMR, the pyrazine protons are more deshielded (ave. 0.52 ppm) than in free pyrazine. The coupling constants with the pyrazine protons 3J(¹⁹⁵Pt-¹H) are between 28 and 35 Hz. The crystal structures of three pyrazine-bridged dimers, {trans-Pt(R₂SO)Cl₂}₂(μ-pyrazine) were studied by X-ray diffraction methods. The results confirmed the trans,trans configuration of the compounds. All the molecules contain an inversion centre.     

Study of Pt(II)-aromatic amines complexes of the types cis- and trans-Pt(amine)2I2, [Pt(amine)4]I2 and I(amine)Pt(μ-I)2Pt(amine)I

Pt(II) complexes of the types cis- and trans-Pt(amine)₂I₂ with amines containing a phenyl group were synthesized and studied mainly by IR and multinuclear (¹⁹⁵Pt, ¹H and ¹³C) magnetic resonance spectroscopies. The compounds are not very soluble. In ¹⁹⁵Pt NMR spectroscopy, the cis isomers were observed at slightly lower fields than the trans analogues (average Δδ = 11 ppm) in acetone. In ¹H NMR, the NH groups were also found at slightly lower fields in the cis isomers. The coupling constants ²J(¹⁹⁵Pt-¹HN) varied from 53 to 85 Hz and seem slightly smaller in the trans configuration. The ¹³C NMR spectra of most of the complexes were measured. No coupling constants J(¹⁹⁵Pt-¹³C) were detected due to the low solubility of the compounds. The cis isomers containing a phenyl group on the N atom could not be isolated except for Ph-NH₂ which was shown to be a mixture of isomers in acetone. The tetrasubstituted ionic compounds [Pt(amine)₄]I₂ for the less crowded ligands were also studied mainly by NMR spectroscopy in aqueous solution. The ¹⁹⁵Pt chemical shifts vary between −2855 and −2909 ppm. The coupling constants ³J(¹⁹⁵Pt-¹H) are about 40 Hz. The iodo-bridged dinuclear species I(amine)Pt(μ-I)₂Pt(amine)I were also synthesized and characterized. Two isomers are present in acetone solution for most of the compounds. Their δ(Pt) signals were observed at about −4000 ppm and their coupling constants ²J(¹⁹⁵Pt-¹HN) are around 69 Hz.     

Synthesis and NMR characterization of the novel mixed-ligands Pt(II) complexes Pt(amine)(pyrimidine)X2 and trans,trans-X2(amine)Pt(μ-pyrimidine)Pt(amine)X2 (X = I and Cl)

Mixed-ligand complexes of the type Pt(amine)(pm)I₂, (pm = pyrimidine) were synthesized and characterized by IR spectroscopy and by multinuclear (¹⁹⁵Pt, ¹H and ¹³C) magnetic resonance spectroscopy. The cis compounds were prepared from the reaction of I(amine)Pt(μ-I)₂Pt(amine)I with pyrimidine (1:2 proportion) in water, while the trans isomers were synthesized from the isomerization of the cis complexes in acetone. The cis isomers could not be isolated with several amines, especially the more bulky ones. In ¹H NMR, the pyrimidine protons of the cis compounds were found at lower fields than those of the trans analogs and the J(¹⁹⁵Pt-¹H) coupling constants are slightly larger in the cis geometry. For n-butylamine, the reaction produced also I₂(n-butylamine)Pt(μ-pm)Pt(n-butylamine)I₂. No such dimer could be isolated with the other amines. The compounds Pt(amine)(pm)Cl₂ were also prepared (amine = methylamine and t-butylamine) from the ionic complex K[Pt(amine)Cl₃] using an excess of pyrimidine. The IR and NMR characterization showed that the methylamine compound was a cis-trans mixture, while only the trans isomer was isolated with t-butylamine. When the same reaction was performed using a Pt:pm ratio of 2:1, Cl₂(amine)Pt(μ-pm)Pt(amine)Cl₂ was isolated. The pyrimidine-bridged dimers were identified by IR and multinuclear magnetic resonance spectroscopies as the trans-trans isomers. The trans monomers and dimers showed only one ν(Pt-Cl) band. The ¹⁹⁵Pt NMR signals of the dimers were found close to those of the monomer trans-Pt(amine)(pm)Cl₂.     

Thiotungstates containing the syn-[W2(O/S)2(μ-S)2] (E = O, S) and cuboidal [W2Cu2(μ3-S)4] cores

Reaction of [W^VIS₄]²⁻ with ethane-1,2-dithiol edtH₂ in the presence of the sulfide scavenger Cd²⁺ yielded the dinuclear tungstate syn-[{(edt)W^V(O/S)}₂(μ-S)₂]²⁻ (1), with the terminal S/O disordered over the two tungsten sites in the ratio 0.8:02. In the presence of thiocyanate, phosphine and CuI, the anionic cuboidal clusters of composition [{(SCN)₃W^V}₂{Cu^I(PPh₃)}₂(μ₃-S)₄]²⁻ (2) and (3, diphos = 1,2-bis(o-diphenylphosphinophenyl)ethane), and possibly via an intermediate [{(SCN)₃W^VS}₂(μ-S)₂]⁴⁻. The crystal and molecular structures of [Et₄N]₂1, [Et₄N]₂2 · H₂O and [Et₄N]₂3 · H₂O have been determined.     

Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

Oxidative nuclease activity of ferromagnetically coupled μ-hydroxo-μ-propionato copper(II) complexes [Cu3(L)2(μ-OH)2(μ-propionato)2] (L = N-(pyrid-2-ylmethyl)R-sulfonamidato, R = benzene, toluene, naphthalene)

Three doubly-bridged, trinuclear copper(II) compounds with hydroxo and carboxylato bridges, ^∞₁[Cu₃(L1)₂(μ-OH)₂(μ-propionato)₂](1), [Cu₃(L2)₂(μ-OH)₂(μ-propionato)₂(DMF)₂] (2) and ^∞₁{[Cu₃(L3)₂(μ-OH)₂(μ-propionato)₂]} [Cu₃(L3)₂(μ-OH)₂(μ-propionato)₂(DMF)₂]} (3) [HL1 = N-(pyrid-2-ylmethyl)benzenesulfonylamide, HL2 = N-(pyrid-2-ylmethyl)toluenesulfonylamide, HL3 = N-(pyrid-2-ylmethyl)naphthalenesulfonylamide], have been synthesized and characterized. 1 is built from [Cu₃(L1)₂(μ-OH)₂(μ-propionato)₂] clusters. Each unit contains three copper(II) with two different coordination environments: the terminal centers are square-base pyramidal whereas the central copper is square planar. 2 presents a similar square-base pyramidal geometry in the terminal centers, but the central copper is six-coordinate. 3 shows an unusual 1D coordination polymer comprised of two distinct building blocks: one similar to that found in 1 and the other similar to that found in 2. The magnetic susceptibility measurements (2-300 K) reveal a ferromagnetic interaction between the Cu(II) ions with J values of 76.0, 55.0, and 48.0 cm⁻¹ for 1, 2, and 3, respectively. Emission spectroscopy, thermal denaturation, viscosimetry and cyclic voltammetry show an interaction of the complexes with DNA through the sugar-phosphate backbone. All three Cu(II) complexes were found to be very efficient agents of plasmid DNA cleavage in the presence of ascorbato or mercaptopropionic acid. Both the kinetics and the mechanism of the cleavage reaction have also been examined.     

Dithiolate and diselenolate complexes [Pt2(μ-ECH2CHCHCH2E)(PPh3)4] (E = S, Se): Synthesis, characterisation and mass spectrometric formation of the dichalcogenide species [Pt2(μ-E2)(PPh3)4]

The reactions of [Pt₂(μ-E)₂(PPh₃)₄] (E = S, Se) with cis-1,4-dichlorobut-2-ene (cis-ClCH₂CHCHCH₂Cl) give the dichalcogenolate complexes [Pt₂(μ-ECH₂CHCHCH₂E)(PPh₃)₄]²⁺; an X-ray structure determination on the thiolate complex was carried out. The complexes give the expected dications in ESI mass spectra recorded at very low cone voltages, but at moderate cone voltages undergo facile fragmentation via a retro-Diels-Alder reaction and loss of 1,3-butadiene, giving the dichalcogenide species [Pt₂(μ-E₂)(PPh₃)₄]²⁺. Analogous species containing bidentate phosphine or arsine ligands have been previously generated electrochemically, and studied theoretically.     

Synthesis and characterisation of [Pt2(μ-S)(μ-I)(PPh3)4] - A cationic iodo analogue of the metalloligand [Pt2(μ-S)2(PPh3)4]

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a number of transition metal-iodo complexes leads to the formation of the cationic iodo analogue [Pt₂(μ-S)(μ-I)(PPh₃)₄]⁺, identified using electrospray ionisation mass spectrometry (ESI MS). Synthetic routes to this complex were developed, using the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with either [PtI₂(PPh₃)₂] or elemental iodine. The complex was characterised by NMR spectroscopy, ESI MS and an X-ray structure determination, which reveals the presence of a planar, disordered {Pt₂SI}⁺ core. Monitoring the iodine reaction by ESI MS allows the identification of various iodine species, including the short-lived intermediate [Pt₂(μ-S)₂(PPh₃)₄I]⁺, which allows a mechanism for the reaction to be proposed.     

Synthesis, structure, and formation mechanism of the halogen-bridged tricobalt clusters, [Co3Cp3(μ3-CPh)2(μ-X)] (X=Cl, Br, and I)

Reactions of a benzylidyne-capped tricobalt cluster, [Co₃Cp₃(μ₃-CPh)₂] (1), with halogens (X₂ = Cl₂, Br₂, and I₂) in CH₂Cl₂ afforded halogen-adducts of 1. The structure of four isolated salts [Co₃Cp₃(μ₃-CPh)₂(μ-Cl)]PF₆ · MeCN (2PF₆ · MeCN), [Co₃Cp₃(μ₃-CPh)₂(μ-Br)]SbF₆ (3SbF₆), [Co₃Cp₃(μ₃-CPh)₂(μ-I)]SbF₆ · CH₂Cl₂ (4SbF₆ · CH₂Cl₂), and [Co₃Cp₃(μ₃-CPh)₂(μ-I)]I₃ (4I₃) determined by X-ray diffraction can be regarded formally as halide-adducts of 1²⁺. The halogen atom in each structure lies in the Co₃ plane. The halogen-bridged Co-Co edge was elongated (in 2PF₆ · MeCN = 2.6072(4), in 3SbF₆ = 2.6106(7), in 4SbF₆ · CH₂Cl₂ = 2.622(2), and in 4I₃=2.6718(9) Å), and the Co-Co distances that had no halogen-bridge remained unchanged from the Co-Co distance of 1 (2.382(8) Å), (in 2PF₆=2.4037(8) and 2.3948(7), in 3SbF₆=2.3888(6) and 2.4017(7), in 4SbF₆ · CH₂Cl₂ = 2.393(2) and 2.388(1), and in 4I₃ = 2.397(1) and 2.3868(9) Å). The UV-Vis absorption spectra of 2⁺, 3⁺, and 4⁺ had characteristic absorption peaks at 796, 819, and 844 nm, respectively. Cyclic voltammograms of 2PF₆ in CH₂Cl₂ with 0.1 M ⁿBu₄NPF₆ as the supporting electrolyte showed a chemically reversible oxidation (at a potential of 0.75 V versus Fc/Fc⁺), and an irreversible reduction wave at −0.57 V. The irreversible reduction resulted in the recovery of 1. The redox properties of 3⁺ and 4⁺ are very similar to that of 2⁺. Cyclic voltammetry of 1 in 0.1 M ⁿBu₄NCl/MeCN indicates that the formation of 2⁺ is a multi-step reaction. Initially, 1 is oxidized to 1⁺, and then, 1⁺ is coordinated by Cl⁻ followed by immediate oxidation to 2⁺.     

Reaction of [Pt3(μ-CO)3(PBu3)3] with activated olefins and alkynes: the X-ray-structure of [Pt(CO)(PBu3)(CF3CCCF3)]

The reactions of the triangulo-cluster [Pt₃(μ-CO)₃(P^tBu₃)₃] with activated olefins and alkynes have been examined under various conditions. At low temperature, cluster fragmentation occurs yielding the Pt(0) complexes [Pt(CO)(P^tBu₃)(olefin)] (olefin = maleic anhydride and maleimide), while di(tert-butyl)acetylenedicarboxilate reacts quantitatively giving the dinuclear Pt(0) complex [Pt₂(CO)₂(P^tBu₃)₂(μ-η²:η²-^tBuO₂CCCCO₂^tBu)]. At higher temperature and in the presence of alkyne in large excess, the latter dimer converts quantitatively to the monomers [Pt(CO)(P^tBu₃)(alkyne)] (alkyne = CF₃CCCF₃ and ^tBuO₂CCCCO₂^tBu). The stereochemistry of these complexes has been established by NMR and IR measurements. The structure of [Pt(CO)(P^tBu₃)(CF₃CCCF₃)] was confirmed by X-ray diffraction analysis.     

Hydrido-derivatives of [Ir4(CO)10(diphosphine)]: X-ray analyses of [Ir4H(CO)9(μ-Ph2PH(CH3)PPh2)] and [Ir4 H(CO)9(μ-Ph2P(CH2)nPPh2)] (n = 2, 3)

Some novel hydrido-anions of general formula [Ir₄H(CO)₉(μ-L-L)]⁻ (L-L = Ph₂PCH(CH₃)PPh₂, Ph₂P(CH₂)₂PPh₂, Ph₂P(CH₂)₃PPh₂ and Ph₂AsCH₂AsPh₂) have been obtained by the reaction of [Ir₄(CO)₁₀(μ-L-L)] with the base 1,8-diazabicyclo[5.4.0]undec-7-ene in wet dichloromethane. According to IR and ¹H, ³¹P and ¹³C NMR data at low temperature, these anionic derivatives display a single conformation in solution: three edge-bridging COs around the triangular basal face and both the hydride and the bidentate ligands located in axial positions relative to this face. The structures of four compounds were established by X-ray diffraction studies, which confirmed the configuration proposed on the basis of spectroscopic data.     

Aqueous Speciation of ansa- and non-ansa- Substituted [Cp2Mo(μ-OH)]2[OTs]2

Titration curves were measured for three molybdocene dimers, [Cp₂Mo(μ-OH)]₂[OTs]₂ (4), [Mo(μ-OH)]₂[OTs]₂ (4′; Cp′ = C₅H₄CH₃), and ansa-[C₂Me₄Cp₂Mo(μ-OH)]₂[OTs]₂ (4^a), and for two monomeric molybdocene complexes, Cp₂MoO (6) and Cp₂MoCl₂ (1). The titration curves for 4, 6, and 1 were identical and showed three equivalence points each. The titration curve for 4′ was also similar in appearance but the equivalence points were shifted higher by ∼0.3, as expected for the more electron-rich Mo center in this molecule. The titration curve for the ansa-[C₂Me₄Cp₂Mo(μ-OH)]₂[OTs]₂ complex showed only two equivalence points. Two of the equivalence points observed in the titration of 4, 6, and 1 were previously reported in potentiometric measurements of aqueous solutions of Cp₂MoCl₂ and were attributed to the Cp₂Mo(OH₂)²⁺ species (pK_a = 5.5 ± 0.1 and 8.3 ± 0.2). The third equivalence point (pK_a = 2.2 ± 0.2) is assigned to protonation/deprotonation of the [Cp₂Mo(μ-OH)]₂[OTs]₂/[Cp₂Mo(μ-OH₂)(μ-OH)MoCp₂]³⁺ dimer. A new equilibrium scheme is proposed for the aquated molybdocenes to provide a more complete picture of the aqueous speciation of the non-ansa molybdocene complexes, specifically by accounting for the third acidic proton in the titration curves and by describing the hydrolysis of Cp₂MoO. Although the titration curve of the ansa-[C₂Me₄Cp₂Mo(μ-OH)]₂[OTs]₂ complex is different from that of [Cp₂Mo(μ-OH)]₂[OTs]₂, ¹H NMR data suggest that the aqueous speciation of the ansa-[C₂Me₄Cp₂Mo(μ-OH)]₂[OTs]₂ complex is analogous to that of the non-ansa molybdocenes.     

Metal-sulfur dπ-pπ buffering of the oxidations of metal-thiolate complexes: Photoelectron spectroscopy of (η-C5H5)Fe(CO)2SR (SR = SCH3, SBu) and (η-C5H5)Re(NO)(PR3)SCH3 (PR3 = PPr3, PPh3)

The metal-sulfur bonding present in the transition metal-thiolate complexes CpFe(CO)₂SCH₃, CpFe(CO)₂S^tBu, CpRe(NO)(PⁱPr₃)SCH₃, and CpRe(NO)(PPh₃)SCH₃ (Cp = η⁵-C₅H₅) is investigated via gas-phase valence photoelectron spectroscopy. For all four complexes a strong dπ-pπ interaction exists between a filled predominantly metal d orbital of the [CpML₂]⁺ fragment and the purely sulfur 3pπ lone pair of the thiolate. This interaction results in the highest occupied molecular orbital having substantial M-S π^∗ antibonding character. In the case of CpFe(CO)₂SCH₃, the first (lowest energy) ionization is from the Fe-S π^∗ orbital, the next two ionizations are from predominantly metal d orbitals, and the fourth ionization is from the Fe-S π orbital. The pure sulfur pπ lone pair of the thiolate fragment is less stable than the filled metal d orbitals of the [CpFe(CO)₂]⁺ fragment, resulting in a Fe-S π^∗ combination that is higher in sulfur character than the Fe-S π combination. Interestingly, substitution of a tert-butyl group for the methyl group on the thiolate causes little shift in the first ionization, in contrast to the shift observed for related thiols. This is a consequence of the delocalization and electronic buffering provided by the Fe-S dπ-pπ interaction. For CpRe(NO)(PⁱPr₃)SCH₃ and CpRe(NO)(PPh₃)SCH₃, the strong acceptor ability of the nitrosyl ligand rotates the metal orbitals for optimum backbonding to the nitrosyl, and the thiolate rotates along with these orbitals to a different preferred orientation from that of the Fe complexes. The initial ionization is again the M-S π^∗ combination with mostly sulfur character, but now has considerable mixing among several of the valence orbitals. Because of the high sulfur character in the HOMO, ligand substitution on the metal also has a small effect on the ionization energy in comparison to the shifts observed for similar substitutions in other molecules. These experiments show that, contrary to the traditional interpretation of oxidation of metal complexes, removal of an electron from these metal-thiolate complexes is not well represented by an increase in the formal oxidation state of the metal, nor by simple oxidation of the sulfur, but instead is a variable mix of metal and sulfur content in the highest occupied orbital.     

Synthesis and structural characterisation of the lead-platinum sulfido aggregates [Pt2(μ-S)2(PPh3)4PbX2] (X = Br, I); promotion of rare tetrahedral geometry for lead(II)

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] with excess PbBr₂ or PbI₂ in methanolic suspension result in the formation of the neutral lead(II) halide adducts [Pt₂(μ-S)₂(PPh₃)₄PbX₂] (X = Br, I). The X-ray structure determination of the lead iodide adduct reveals an essentially tetrahedral lead(II) centre, which is a rare coordination geometry for lead(II), which almost invariably is hemidirected, with a stereochemically active lone pair. In contrast, the structure of the PbBr₂ adduct, although suffering from some disorder, shows a more typical, distorted arrangement of ligands; these results are discussed in terms of the tendency for soft, bulky ligands to promote symmetric, holodirected geometries. The ESI mass spectra of the adducts are reported, and yield [M−halide]⁺ ions.     

Further studies on the dialkylation chemistry of [Pt2(μ-S)2(PPh3)4] with activated alkyl halides RC(O)CH2X (X = Cl, Br)

Further studies have been carried out into the reactivity of [Pt₂(μ-S)₂(PPh₃)₄] towards a range of activated alkylating agents of the type RC(O)CH₂X (R = organic moiety, e.g. phenyl, pyrenyl; X = Cl, Br). Alkylation of both sulfide centers is observed for PhC(O)CH₂Br, 3-(bromoacetyl)coumarin [CouC(O)CH₂Br], and 1-(bromoacetyl)pyrene [PyrC(O)CH₂Br], giving dications [Pt₂{μ-SCH₂C(O)R}₂(PPh₃)₄]²⁺, isolated as their PF₆⁻ salts. The X-ray structure of [Pt₂{μ-SCH₂C(O)Ph}₂(PPh₃)₄](PF₆)₂ shows the presence of short Pt?O contacts. In contrast, the corresponding chloro compounds [typified by PhC(O)CH₂Cl] and imino analogues [e.g. PhC(NOH)CH₂Br] do not dialkylate [Pt₂(μ-S)₂(PPh₃)₄]. The ability of PhC(O)CH₂Br to dialkylate [Pt₂(μ-S)₂(PPh₃)₄] allows the synthesis of new mixed-alkyl dithiolate derivatives of the type [Pt₂{μ-SCH₂C(O)Ph}(μ-SR)(PPh₃)₄]²⁺ (R = Et or n-Bu), through alkylation of in situ-generated monoalkylated compounds [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (from [Pt₂(μ-S)₂(PPh₃)₄] and excess RBr). In these heterodialkylated systems ligand replacement of PPh₃ occurs by the bromide ions in the reaction mixture forming monocations [Pt₂{μ-SCH₂C(O)Ph}(μ-SR)(PPh₃)₃Br]⁺. This ligand substitution can be easily suppressed by addition of PPh₃ to the reaction mixture. The complex [Pt₂{μ-SCH₂C(O)Ph}(μ-SBu)(PPh₃)₄]²⁺ was crystallographically characterized. X-ray crystal structures of the bromide-containing complexes [Pt₂{μ-SCH₂C(O)Ph}(μ-SR)(PPh₃)₃Br]⁺ (R = Et, Bu) are also reported. In both structures the coordinated bromide is trans to the SCH₂C(O)Ph ligand, which adopts an axial position, while the ethyl and butyl substituents adopt equatorial positions, in contrast to the structures of the dialkylated complexes [Pt₂{μ-SCH₂C(O)Ph}₂(PPh₃)₄]²⁺ and [Pt₂{μ-SCH₂C(O)Ph}(μ-SBu)(PPh₃)₄]²⁺ (and many other known analogues) where both alkyl groups adopt axial positions.     

Reactivity of [PdCl(μ-med)]2 with monodentate or bidentate ligands. Structure of the dinuclear complexes [Pd(μ-med)(PPh3)]2(BF4)2 and [Pd(μ-med)(bpy)]2(BF4)2. [Hmed=N-(2-mercaptoethyl)-3,5-dimethylpyrazole]

Treatment of the ligand N-(2-mercaptoethyl)-3,5-dimethylpyrazole with [Pd(CH₃COO)₂]₃ and reaction of [PdCl(μ-med)]₂ with pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ produced the following complexes: [Pd(CH₃COO)(μ-med)]₂, [Pd(μ-med)(py)]₂(BF₄)₂ and [Pd(μ-med)(PPh₃)]₂(BF₄)₂. Similar reactions carried out with 2,2^′-bipyridine (bpy) or 1,3-bis(diphenylphosphino)propane (dppp) produced [Pd(μ-med)(bpy)]_x(BF₄)_x (x=1 or 2) and [Pd(μ-med)(dppp)]_x(BF₄)_x (x=1 or 2). Treatment of [Pd(μ-med)(bpy)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced [Pd₃Cl₂(μ-med)₂(bpy)₂](BF₄)₂. Treatment of [Pd(μ-med)(dppp)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced a mixture of [Pd(μ-Cl)(dppp)]₂(BF₄)₂ and [Pd(μ-med)₂(dppp)]²⁺. X-ray crystal structures of [Pd(μ-med)(PPh₃)]₂(BF₄)₂ · 2CH₃CN and [Pd(μ-med)(bpy)]₂(BF₄)₂ · 0.5CH₃OH are presented.     

A one-dimensional copper (II) coordination polymer [Cu3(ampym)2(μ1,1-N3)4(μ1,3-N3)2(dmf)2]n (ampym = 2-aminopyrimidine) containing both end-on and end-to-end azido bridges

A new polynuclear copper (II) complex, derived from the azido-bridging ligand and 2-aminopyrimidine, has been synthesized and its 3-D structure has been determined by X-ray diffraction methods at two different temperatures. The compound crystallizes in the triclinic system space group, with the central copper atom lying on an inversion centre. The crystal structure is built up by trinuclear units (each of them contains two double end-on azido bridges) linked through two azide ions in an end-to-end (EE) fashion, to yield the polymer chain [Cu₃(ampym)₂(μ_1,1-N₃)₄(μ_1,3-N₃)₂(dmf)₂]_n. Magnetic susceptibility measurement shows a ferromagnetic interaction above 30 K, whereas a weak anti-ferromagnetic interaction prevails in the range of 30-2 K.     

Synthesis and characterisation of adducts of [Pt2(μ-S)2(PPh3)4] with organo-palladium and platinum-hydride substrates

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] towards a range of palladium(II) complexes containing organometallic ligands (cyclopalladated N-donor ligands, η³-allyl, phenyl) have been explored, leading to the formation of a series of cationic, trinuclear sulfido-bridged aggregates containing {Pt₂PdS₂} cores. [Pt₂(μ-S)₂(PPh₃)₄] also reacts with the platinum(II) hydride complex trans-[PtHCl(PPh₃)₂] giving the adduct [Pt₂(μ-S)₂(PPh₃)₄PtH(PPh₃)]⁺. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄PdPh(PPh₃)]PF₆ and [Pt₂(μ-S)₂(PPh₃)₄PtH(PPh₃)]PF₆ are reported, and show the expected bis μ₃-sulfido aggregates with three square-planar metal centres.