Enzymatic degradation of carboxymethyl cellulose hydrolyzed by the endoglucanases Cel5A, Cel7B, and Cel45A from Humicola insolens and Cel7B, Cel12A and Cel45Acore from Trichoderma reesei.

Enzymatic hydrolysis of carboxymethyl cellulose (CMC) has been studied with purified endoglucanases Hi Cel5A (EG II), Hi Cel7B (EG I), and Hi Cel45A (EG V) from Humicola insolens, and Tr Cel7B (EG I), Tr Cel12A (EG III), and Tr Cel45Acore (EG V) from Trichoderma reesei. The CMC, with a degree of substitution (DS) of 0.7, was hydrolyzed with a single enzyme until no further hydrolysis was observed. The hydrolysates were analyzed for production of substituted and non-substituted oligosaccharides with size exclusion chromatography (SEC) and with matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF-MS). Production of reducing ends and of nonsubstituted oligosaccharides was determined as well. The two most effective endoglucanases for CMC hydrolysis were Hi Cel5A and Tr Cel7B. These enzymes degraded CMC to lower molar mass fragments compared with the other endoglucanases. The products had the highest DS determined by MALDI-TOF-MS. Thus, Hi Cel5A and Tr Cel7B were less inhibited by the substituents than the other endoglucanases. The endoglucanase with clearly the lowest activity on CMC was Tr Cel45Acore. It produced less than half of the amount of reducing ends compared to Tr Cel7B; furthermore, the products had significantly lower DS. By MALDI-TOF-MS, oligosaccharides with different degree of polymerization (DP) and with different number of substituents could be separated and identified. The average oligosaccharide DS as function of DP could be measured for each enzyme after hydrolysis. The combination of techniques for analysis of product formation gave information on average length of unsubstituted blocks of CMC.     

Cellulases of Penicillium verruculosum

Nine major cellulolytic enzymes were isolated from a culture broth of a mutant strain of the fungus Penicillium verruculosum: five endo-1, 4-β-glucanases (EGs) having molecular masses 25, 33, 39, 52, and 70 kDa, and four cellobiohydrolases (CBHs: 50, 55, 60, and 66 kDa). Based on amino acid similarities of short sequenced fragments and peptide mass fingerprinting, the isolated enzymes were preliminary classified into different families of glycoside hydrolases: Cel5A (EG IIa, 39 kDa), Cel5B (EG IIb, 33 kDa), Cel6A (CBH II, two forms: 50 and 60 kDa), Cel7A (CBH I: 55 and 66 kDa), Cel7B (EG I: 52 and 70 kDa). The 25 kDa enzyme was identical to the previously isolated Cel12A (EG III). The family assignment was further confirmed by the studies of the substrate specificity of the purified enzymes. High-molecular-weight forms of the Cel6A, Cel7A, and Cel7B were found to possess a cellulose-binding module (CBM), while the catalytically active low-molecular-weight forms of the enzymes, as well as other cellulases, lacked the CBM. Properties of the isolated enzymes, such as substrate specificity toward different polysaccharides and synthetic glycosides, effect of pH and temperature on the enzyme activity and stability, adsorption on Avicel cellulose and kinetics of its hydrolysis, were investigated.     

Effect of xylanase supplementation of cellulase on digestion of corn stover solids prepared by leading pretreatment technologies

Solids resulting from pretreatment of corn stover by ammonia fiber expansion (AFEX), ammonia recycled percolation (ARP), controlled pH, dilute acid, lime, and sulfur dioxide (SO₂) technologies were hydrolyzed by enzyme cocktails based on cellulase supplemented with β-glucosidase at an activity ratio of 1:2, respectively, and augmented with up to 11.0 g xylanase protein/g cellulase protein for combined cellulase and β-glucosidase mass loadings of 14.5 and 29.0 mg protein (about 7.5 and 15 FPU, respectively)/g of original potential glucose. It was found that glucose release increased nearly linearly with residual xylose removal by enzymes for all pretreatments despite substantial differences in their relative yields. The ratio of the fraction of glucan removed by enzymes to that for xylose was defined as leverage and correlated statistically at two combined cellulase and β-glucosidase mass loadings with pretreatment type. However, no direct relationship was found between leverage and solid features following different pretreatments such as residual xylan or acetyl content. However, acetyl content not only affected how xylanase impacted cellulase action but also enhanced accessibility of cellulose and/or cellulase effectiveness, as determined by hydrolysis with purified CBHI (Cel7A). Statistical modeling showed that cellulose crystallinity, among the main substrate features, played a vital role in cellulase–xylanase interactions, and a mechanism is suggested to explain the incremental increase in glucose release with xylanase supplementation.     

Enzyme adsorption and recycling during hydrolysis of wheat straw lignocellulose

The objective of this research was to investigate cellulase adsorption and recycling during enzymatic hydrolysis of two differently pretreated wheat straws (WS). Dilute acid treated WS showed lower hydrolysis yield of polysaccharides fraction and adsorbed more cellulase with hydrolyzed residue than dilute alkali treated sample. Four methods capable of recovering and recycling the enzyme bound to the residual substrate and the enzyme free in solution were used for three consecutive rounds of hydrolysis to compare their recycling efficiencies. Compared to the absorption recycling method, ultrafiltration recycling method possessed the capacity to retain β-glucosidase, thereby avoiding the supplementation of fresh β-glucosidase in subsequent rounds of hydrolysis. It was found that whatever recycling method was used, better recycling results were obtained for dilute alkali treated substrate than for dilute acid treated substrate. These results suggested that the great difference in the lignin content between acid treated WS and alkali treated WS would significantly affect enzymatic hydrolysis, cellulase adsorption and cellulase recycling efficiencies.     

Cellulase Complex of the Fungus Chrysosporium lucknowense: Isolation and Characterization of Endoglucanases and Cellobiohydrolases

Using different chromatographic techniques, eight cellulolytic enzymes were isolated from the culture broth of a mutant strain of Chrysosporium lucknowense: six endoglucanases (EG: 25 kD, pI 4.0; 28 kD, pI 5.7; 44 kD, pI 6.0; 47 kD, pI 5.7; 51 kD, pI 4.8; 60 kD, pI 3.7) and two cellobiohydrolases (CBH I, 65 kD, pI 4.5; CBH II, 42 kD, pI 4.2). Some of the isolated cellulases were classified into known families of glycoside hydrolases: Cel6A (CBH II), Cel7A (CBH I), Cel12A (EG28), Cel45A (EG25). It was shown that EG44 and EG51 are two different forms of one enzyme. EG44 seems to be a catalytic module of an intact EG51 without a cellulose-binding module. All the enzymes had pH optimum of activity in the acidic range (at pH 4.5-6.0), whereas EG25 and EG47 retained 55-60% of the maximum activity at pH 8.5. Substrate specificity of the purified cellulases against carboxymethylcellulose (CMC), beta-glucan, Avicel, xylan, xyloglucan, laminarin, and p-nitrophenyl-beta-D-cellobioside was studied. EG44 and EG51 were characterized by the highest CMCase activity (59 and 52 U/mg protein). EG28 had the lowest CMCase activity (11 U/mg) amongst the endoglucanases; however, this enzyme displayed the highest activity against beta-glucan (125 U/mg). Only EG51 and CBH I were characterized by high adsorption ability on Avicel cellulose (98-99%). Kinetics of Avicel hydrolysis by the isolated cellulases in the presence of purified beta-glucosidase from Aspergillus japonicus was studied. The hydrolytic efficiency of cellulases (estimated as glucose yield after a 7-day reaction) decreased in the following order: CBH I, EG60, CBH II, EG51, EG47, EG25, EG28, EG44.     

Lactosylamidine-based affinity purification for cellulolytic enzymes EG I and CBH I from Hypocrea jecorina and their properties

Selective adsorption and separation of β-glucosidase, endo-acting endo-β-(1→4)-glucanase I (EG I), and exo-acting cellobiohydrolase I (CBH I) were achieved by affinity chromatography with β-lactosylamidine as ligand. A crude cellulase preparation from Hypocrea jecorina served as the source of enzyme. When crude cellulase was applied to the lactosylamidine-based affinity column, β-glucosidase appeared in the unbound fraction. By contrast, EG I and CBH I were retained on the column and then separated from each other by appropriately adjusting the elution conditions. The relative affinities of the enzymes, based on their column elution conditions, were strongly dependent on the ligand. The highly purified EG I and CBH I, obtained by affinity chromatography, were further purified by Mono P and DEAE chromatography, respectively. EG I and CBH I cleave only at the phenolic bond in p-nitrophenyl glycosides with lactose and N-acetyllactosamine (LacNAc). By contrast, both scissile bonds in p-nitrophenyl glycosides with cellobiose were subject to hydrolysis although with important differences in their kinetic parameters.     

Does change in accessibility with conversion depend on both the substrate and pretreatment technology?

The accessibility of cellulase and xylanase enzymes to glucan and xylan, respectively, and its change with conversion were measured for pure Avicel glucan and poplar solids that had been pretreated by ammonia fiber expansion (AFEX), ammonia recycled percolation (ARP), dilute acid, and lime. Avicel and pretreated solids were digested to various degrees by cellulase together with β-glucosidase enzymes and then cleaned of residual protein via a biological method using Protease. Glucan accessibility was determined by purified CBHI (Cel7A) adsorption at 4 °C, and 4 and 24 h hydrolysis yields were determined for solids loading containing equal amounts of glucan (1.0% w/v) and lignin (1.0% w/v), in two separate sets of experiments. Consistent with our previous study and in contrast to some in the literature, little change in glucan accessibility was observed with conversion for Avicel, but glucan and xylan accessibility for real biomass varied with the type of pretreatment. For example, AFEX pretreated solids showed a negligible change in glucan accessibility for conversion up to 90%, although xylan accessibility seemed to decline first and then remained constant. On the other hand, a substantial decline in glucan and xylan accessibility with conversion was observed for lime pretreated poplar solids, as shown by initial hydrolysis rates. Yet, an increase in CBHI adsorption with conversion for lime pretreated poplar solids suggested the opposite trend, possibly due to increased lignin exposure and/or reduced effectiveness of adsorbed enzyme.     

Pure enzyme cocktails tailored for the saccharification of sugarcane bagasse pretreated by using different methods

The compositions and physical properties of pretreated lignocellulose vary depending on pretreatment methods; therefore, enzyme cocktails specific to pretreatments are desired for efficient saccharification of lignocellulose. Here, enzyme cocktails consisting of three pure lignocellulolytic enzymes endoglucanase (EG), cellobiohydrolase (CBH) and endoxylanase (XN) with a fixed amount of β-glucosidase were tailored for acid- and alkali-pretreated sugarcane bagasse (ACID and ALKALI, respectively). Based on a mixture design, the optimal mass ratios of EG, CBH, and XN were determined to be 61.25:38.73:0.02 and 53.99:34.60:11.41 for ACID and ALKALI, respectively. The optimized enzyme cocktail yielded a higher or comparable amount of reducing sugars from the hydrolysis of ACID and ALKALI when compared to that obtained using commercial cellulase mixtures. Using the commercial and easily available pure enzymes, this simple method for the in-house preparation of an enzyme cocktail specific to pretreated lignocellulose consisting of only four enzymes with a high level of hydrolysis will be helpful for achieving enzymatic saccharification in the lignocellulose-based biorefinery.     

Binding characteristics of Trichoderma reesei cellulases on untreated, ammonia fiber expansion (AFEX), and dilute-acid pretreated lignocellulosic biomass

Studying the binding properties of cellulases to lignocellulosic substrates is critical to achieving a fundamental understanding of plant cell wall saccharification. Lignin auto-fluorescence and degradation products formed during pretreatment impede accurate quantification of individual glycosyl hydrolases (GH) binding to pretreated cell walls. A high-throughput fast protein liquid chromatography (HT-FPLC)-based method has been developed to quantify cellobiohydrolase I (CBH I or Cel7A), cellobiohydrolase II (CBH II or Cel6A), and endoglucanase I (EG I or Cel7B) present in hydrolyzates of untreated, ammonia fiber expansion (AFEX), and dilute-acid pretreated corn stover (CS). This method can accurately quantify individual enzymes present in complex binary and ternary protein mixtures without interference from plant cell wall-derived components. The binding isotherms for CBH I, CBH II, and EG I were obtained after incubation for 2 h at 4 °C. Both AFEX and dilute acid pretreatment resulted in increased cellulase binding compared with untreated CS. Cooperative binding of CBH I and/or CBH II in the presence of EG I was observed only for AFEX treated CS. Competitive binding between enzymes was found for certain other enzyme-substrate combinations over the protein loading range tested (i.e., 25-450 mg/g glucan). Langmuir single-site adsorption model was fitted to the binding isotherm data to estimate total available binding sites E(bm) (mg/g glucan) and association constant K(a) (L/mg). Our results clearly demonstrate that the characteristics of cellulase binding depend not only on the enzyme GH family but also on the type of pretreatment method employed.     

Carbon nanotubes tuned foam structures as novel nanostructured biocarriers for lignocellulose hydrolysis

The use of immobilized enzymes during saccharification of lignocelluloses enables the continuous process of enzymatic hydrolysis and repeatable use of enzyme, resulting in reduced operational cost. Novel nano-biocarriers were developed by layer-by-layer deposition of carbon nanotube (CNT) on the foam structures, and their efficiency for enzyme immobilization was demonstrated with cellulase and β-glucosidase. A three-fold enhancement was achieved in the activity of cellulase immobilized on CNT coated polyurethane foam. In addition, both cellulase and β-glucosidase immobilized on the CNT-foam showed much better storage stability and operational stability than the ones immobilized on the commercial biocarrier (Celite), which is critical for a continuous operation. CNT coated monolith was also developed as a biocarrier, offering high surface area and geometric stability. These nano-biocarriers are promising candidates for the efficient saccharification of biomass and to reduce carbon footprint and cost of the equipment.     

Dynamic interaction of Trichoderma reesei cellobiohydrolases Cel6A and Cel7A and cellulose at equilibrium and during hydrolysis

The binding of cellobiohydrolases to cellulose is a crucial initial step in cellulose hydrolysis. In the search for a detailed understanding of the function of cellobiohydrolases, much information concerning how the enzymes and their constituent catalytic and cellulose-binding domains interact with cellulose and with each other and how binding changes during hydrolysis is still needed. In this study we used tritium labeling by reductive methylation to monitor binding of the two Trichoderma reesei cellobiohydrolases, Cel6A and Cel7A (formerly CBHII and CBHI), and their catalytic domains. Measuring hydrolysis by high-performance liquid chromatography and measuring binding by scintillation counting allowed us to correlate activity and binding as a function of the extent of degradation. These experiments showed that the density of bound protein increased with both Cel6A and Cel7A as hydrolysis proceeded, in such a way that the adsorption points moved off the initial binding isotherms. We also compared the affinities of the cellulose-binding domains and the catalytic domains to the affinities of the intact proteins and found that in each case the affinity of the enzyme was determined by the linkage between the catalytic and cellulose-binding domains. Desorption of Cel6A by dilution of the sample showed hysteresis (60 to 70% reversible); in contrast, desorption of Cel7A did not show hysteresis and was more than 90% reversible. These findings showed that the two enzymes differ with respect to the reversibility of binding.     

Hydrolysis of different chain length xylooliogmers by cellulase and hemicellulase

Commercial cellulase complexes produced by cellulolytic fungi contain enzyme activities that are capable of hydrolyzing non-cellulosic polysaccharides in biomass, primarily hemicellulose and pectins, in addition to cellulose. However, xylanase activities detected in most commercial enzyme preparations have been shown to be insufficient to completely hydrolyze xylan, resulting in high xylooligomer concentrations remaining in the hydrolysis broth. Our recent research showed that these xylooligomers are stronger inhibitors of cellulase activity than others have previously established for glucose and cellobiose, making their removal of great importance. In this study, a HPLC system that can measure xylooligomers with degrees of polymerization (DP) up to 30 was applied to assess how Spezyme CP cellulase, Novozyme 188 β-glucosidase, Multifect xylanase, and non-commercial β-xylosidase enzymes hydrolyze different chain length xylooligomers derived from birchwood xylan. Spezyme CP cellulase and Multifect xylanase partially hydrolyzed high DP xylooligomers to lower DP species and monomeric xylose, while β-xylosidase showed the strongest ability to degrade both high and low DP xylooligomers. However, about 10-30% of the higher DP xylooligomers were difficult to be breakdown by cellulase or xylanase and about 5% of low DP xylooligomers (mainly xylobiose) proved resistant to hydrolysis by cellulase or β-glucosidase, possibly due to low β-xylosidase activity in these enzymes and/or the precipitation of high DP xylooligomers.     

Cellobiohydrolase I (Cel7A) from Trichoderma reesei has chitosanase activity

Cellobiohydrolase CBH I (Cel7A) from the filamentous fungus Trichoderma reesei (TrCBHI), which is a member of glycoside hydrolase family (GHF) 7, was expressed in Aspergillus oryzae. We found that the recombinant enzyme showed significant chitosanase activity, as well as cellulase activity, and acted in an endo-type manner on soluble polymeric substrate. Furthermore, another GHF7 CBH I from Aspergillus aculeatus (AaCBHI) expressed in A. oryzae also had chitosanase activity, while endoglucanase EG I (Cel7B) from T. reesei had no activity towards chitosan. To our knowledge, this is the first report of GHF7 enzymes possessing chitosanase activity.     

Enzymatic hydrolysis of cellulose to glucose lung immobilized β-glucosidase

The production of sugars by enzymatic hydrolysis of cellulose is a multistep process which includes conversion of the intermediate cellobiose to glucose by β-glucosidase. Aside from its role as an intermediate, cellobiose inhibits the endoglucanase components of typical cellulase enzyme systems. Because these enzyme systems often contain insufficient concentrations of β-glucosidase to prevent accumulation of inhibitory cellobiose, this research investigated the use of supplemental immobilized β-glucosidase to increase yield of glucose. Immobilized β-glucosidase from Aspergillus phoenicis was produced by sorption at controlled-pore alumina with about 90% activity retention. The product lost only about 10% of the original activity during an on-stream reaction period of 500 hr with cellobiose as substrate; maximum activity occurred near pH 3.5 and the apparent activation energy was about 11 kcal/mol. The immobilized β-glucosidase was used together with Trichoderma reesei cellulase to hydrolyze cellulosic materials, such as Solka Floc, corn stove and exploded wood. Increased yields of glucose and greater conversions of cellobiose of glucose were observed when the reaction systems contained supplemental immobilized β-glucosidase.     

Identification and characterization of novel cellulolytic and hemicellulolytic genes and enzymes derived from German grassland soil metagenomes

Soil metagenomes represent an unlimited resource for the discovery of novel biocatalysts from soil microorganisms. Three large-inserts metagenomic DNA libraries were constructed from different grassland soil samples and screened for genes conferring cellulase or xylanase activity. Function-driven screening identified a novel cellulase-encoding gene (cel01) and two xylanase-encoding genes (xyn01 and xyn02). From sequence and protein domain analyses, Cel01 (831 amino acids) belongs to glycoside hydrolase family 9 whereas Xyn01 (170 amino acids) and Xyn02 (255 amino acids) are members of glycoside hydrolase family 11. Cel01 harbors a family 9 carbohydrate-binding module, previously found only in xylanases. Both Xyn01 and Xyn02 were most active at 60°C with high activities from 4 to 10 and optimal at pH 7 (Xyn01) and pH 6 (Xyn02). The cellulase gene, cel01, was expressed in E. coli BL21 and the recombinant enzyme (91.9 kDa) was purified. Cel01 exhibited high activity with soluble cellulose substrates containing β-1,4-linkages. Activity with microcrystalline cellulose was not detected. These data, together with the analysis of the degradation profiles of carboxymethyl cellulose and barley glucan indicated that Cel01 is an endo 1,4-β-glucanase. Cel01 showed optimal activity at 50°C and pH 7 being highly active from pH range 5 to 9 and possesses remarkable halotolerance.     

Functional cello-oligosaccharides production from the corncob residues of xylo-oligosaccharides manufacture

An integrated process has been developed, consisting of the “adsorption–separation” of cellulase enzymes to selectively remove β-glucosidase, and multi-stage enzymatic hydrolysis of corncob residues from xylo-oligosaccharides manufacture with the β-glucosidase deficient cellulase, aiming to obtain a high yield of cello-oligosaccharides production. After the “adsorption–separation” process, 79.50% of the endo-glucanase was retained in substrate, whereas 90.67% of β-glucosidase was removed with the separated liquid fraction, utilizing the different adsorbability of these enzymes to the substrate. A three-stage enzymatic hydrolysis of corncob residues with the β-glucosidase deficient cellulase was proposed in which the first, the second and the third stage were conducted for 6, 6 h and 12 h, respectively. Analysis indicated that the removal of hydrolysis products (glucose and cello-oligosaccharides) at each stage improved cello-oligosaccharides productivity and enzymatic hydrolysis yield. The cello-oligosaccharides yield and enzymatic hydrolysis yield in three-stage enzymatic hydrolysis were significantly improved to 51.78% and 75.56%, respectively, which were 36.00% and 25.10% higher than single-stage hydrolysis with original cellulase enzymes.     

Biochemical and kinetic characterization of the multifunctional β-glucosidase/β-xylosidase/α-arabinosidase,Bgxa1

Functional screening of a metagenomic library constructed with DNA extracted from the rumen contents of a grass/hay-fed dairy cow identified a protein, β-glucosidase/β-xylosidase/α-arabinosidase gene (Bgxa1), with high levels of β-glucosidase activity. Purified Bgxa1 was highly active against p-nitrophenyl-β-d-glucopyranoside (pNPG), cellobiose, p-nitrophenyl-β-d-xylopyranoside (pNPX) and p-nitrophenyl-α-d-arabinofuranoside (pNPAf), suggesting it is a multifunctional β-glucosidase/β-xylosidase/α-arabinosidase. Kinetic analysis of the protein indicated that Bgxa1 has the greatest catalytic activity against pNPG followed by pNPAf and pNPX, respectively. The catalytic efficiency of β-glucosidase activity was 100× greater than β-xylosidase or α-arabinosidase. The pH and temperature optima for the hydrolysis of selected substrates also differed considerably with optima of pH 6.0/45 °C and pH 8.5/40 °C for pNPG and pNPX, respectively. The pH dependence of pNPAf hydrolysis displayed a bimodal distribution with maxima at both pH 6.5 and pH 8.5. The enzyme exhibited substrate-dependent responses to changes in ionic strength. Bgxa1 was highly stable over a broad pH range retaining at least 70 % of its relative catalytic activity from pH 5.0–10.0 with pNPG as a substrate. Homology modelling was employed to probe the structural basis of the unique specificity of Bgxa1 and revealed the deletion of the PA14 domain and insertions in loops adjacent to the active site. This domain has been found to be an important determinant in the substrate specificity of proteins related to Bgxa1. It is postulated that these indels are, in part, responsible for the multifunctional activity of Bgxa1. Bgxa1 acted synergistically with endoxylanase (Xyn10N18) when incubated with birchwood xylan, increasing the release of reducing sugars by 168 % as compared to Xyn10N18 alone. Examination of Bgxa1 and Xyn10N18 synergy with a cellulase for the saccharification of alkali-treated straw revealed that synergism among the three enzymes enhanced sugar release by 180 % as compared to cellulase alone. Our results suggest that Bgxa1 has a number of properties that make it an interesting candidate for the saccharification of lignocellulosic material.     

Competitive inhibition of cellobiohydrolase I by manno-oligosaccharides

In the hydrolysis of softwood, significant amounts of manno-oligosaccharides (MOS) are released from mannan, the major hemicelluloses in softwood. However, the impact of MOS on the performance of cellulases is not yet clear. In this work, the effect of mannan and MOS in cellulose hydrolysis by cellulases, especially cellobiohydrolase I (CBHI) from Thermoascus aurantiacus (Ta Cel7A), was studied. The glucose yield of Avicel decreased with an increasing amount of added mannan. Commercial cellulases contained mannan hydrolysing enzymes, and β-glucosidase played an important role in mannan hydrolysis. Addition of 10 mg/ml mannan reduced the glucose yield of Avicel (at 20 g/l) from 40.1 to 24.3%. No inhibition of β-glucosidase by mannan was observed. The negative effects of mannan and MOS on the hydrolytic action of cellulases indicated that the inhibitory effect was at least partly attributed to the inhibition of Ta Cel7A (CBHI), but not on β-glucosidase. Kinetic experiments showed that MOS were competitive inhibitors of the CBHI from T. aurantiacus, and mannobiose had a stronger inhibitory effect on CBHI than mannotriose or mannotetraose. For efficient hydrolysis of softwood, it was necessary to add supplementary enzymes to hydrolyze both mannan and MOS to less inhibitory product, mannose.     

Optimization of cellulase mixture for efficient hydrolysis of steam-exploded corn stover by statistically designed experiments

To improve the enzymatic hydrolytic efficiency and reduce production cost, a statistically designed experimental approach was used to optimize the composition of cellulase mixture so as to maximize the amount of glucose produced from steam-exploded corn stover (SECS). Using seven purified enzymes (cellobiohydrolases, Cel7A, Cel6A, Cel6B; endoglucanases, Cel7B, Cel12A, Cel61A; and beta-glucosidase) from Trichoderma viride T 100-14 mutant strain, a multi-enzyme mixture was constituted after screening and optimization. The final optimal composition (mol%) of the multi-enzyme mixture was Cel7A (19.8%), Cel6A (37.5%), Cel6B (4.7%), Cel7B (17.7%), Cel12A (15.2%), Cel61A (2.3%) and beta-glucosidase (2.8%). The subsequent verification experiments followed by glucose assay together with scanning electron microscopy (SEM) observation confirmed the validity of the models. The multi-enzyme mixture displayed a high performance in converting the cellulosic substrate (SECS). The amount of glucose produced (15.5mg/ml) was 2.1 times as that of the crude cellulase preparation. The results indicated that the optimized cellulase mixture is an available and efficient paradigm for the hydrolysis of lignocellulosic substrate. The enhanced cellulolytic activity displayed by the constructed cellulase mixture could be used as an effective tool for producing bioethanol efficiently from cellulose.     

The potential of enzyme recycling during the hydrolysis of a mixed softwood feedstock

Despite recent improvement in cellulase enzymes properties, the high cost associated with the hydrolysis step remains a major impediment to the commercialization of full-scale lignocellulose-to-ethanol bioconversion process. As part of a research effort to develop a commercial process for bioconversion of softwood residues, we have examined the potential for recycling enzymes during the hydrolysis of mixed softwood substrate pretreated by organosolv process. We have used response surface methodology to determine the optimal temperature, pH, ionic strength, and surfactant (Tween 80) concentration for maximizing the recovery of bound protein and enzyme activity from the residual substrates after hydrolysis. Data analysis showed that the temperature, pH and surfactant concentration were the major factors governing enzyme desorption from residual substrate. The optimized conditions were temperature 44.4 °C, pH 5.3 and 0.5% Tween 80. The optimal conditions significantly increased the hydrolysis yield by 25% after three rounds of hydrolysis. This bound enzyme desorption combining with free enzyme re-adsorption is a potential method to recover cellulase enzymes and reduce the cost of enzymatic hydrolysis.