Metal–Organic Framework Derived Honeycomb Co9S8@C Composites for High‐Performance Supercapacitors

Unique nanostructures always lead to extraordinary electrochemical energy storage performance. Here, the authors report a new strategy for using Metal‐organic frameworks (MOFs) derived cobalt sulfide in a carbon matrix with a 3D honeycombed porous structure, resulting in a high‐performance supercapacitor with unrivalled capacity of ≈1887 F g^‐1 at the current density of 1 A g^‐1. The honeycomb‐like structure of Co₉S₈@C composite is loosely adsorbed, with plentiful surface area and high conductivity, leading to improved Faradaic processes across the interface and enhanced redox reactions at active Co₉S₈ sites. Therefore, the heterostructure‐fabricated hybrid supercapacitor, using activated carbon as the counter electrode, demonstrates a high energy density of 58 Wh kg^‐1 at the power density of 1000 W kg^‐1. Even under an ultrahigh power density of 17 200 W kg^‐1, its energy density maintains ≈38 Wh kg^‐1. The hybrid supercapacitor also exhibits suitable cycling stability, with ≈90% capacity retention after 10 000 continuous cycles at the current density of 5 A g^‐1. This work presents a practical method for using MOFs as sacrificial templates to synthesize metal‐sulfides for highly efficient electrochemical energy storage.     

Hierarchical Zn–Co–S Nanowires as Advanced Electrodes for All Solid State Asymmetric Supercapacitors

A facile two‐step strategy is developed to design the large‐scale synthesis of hierarchical, unique porous architecture of ternary metal hydroxide nanowires grown on porous 3D Ni foam and subsequent effective sulfurization. The hierarchical Zn–Co–S nanowires (NWs) arrays are directly employed as an electrode for supercapacitors application. The as‐synthesized Zn–Co–S NWs deliver an ultrahigh areal capacity of 0.9 mA h cm^?2 (specific capacity of 366.7 mA h g^?1) at a current density of 3 mA cm^?2, with an exceptional rate capability (≈227.6 mA h g^?1 at a very high current density of 40 mA cm^?2) and outstanding cycling stability (≈93.2% of capacity retention after 10 000 cycles). Most significantly, the assembled Zn–Co–S NWs//Fe₂O₃@reduced graphene oxide asymmetric supercapacitors with a wide operating potential window of ≈1.6 V yield an ultrahigh volumetric capacity of ≈1.98 mA h cm^?3 at a current density of 3 mA cm^?2, excellent energy density of ≈81.6 W h kg^?1 at a power density of ≈559.2 W kg^?1, and exceptional cycling performance (≈92.1% of capacity retention after 10 000 cycles). This general strategy provides an alternative to design the other ternary metal sulfides, making it facile, free‐standing, binder‐free, and cost‐effective ternary metal sulfide‐based electrodes for large‐scale applications in modern electronics.     

Inverted Design for High‐Performance Supercapacitor Via Co(OH)2‐Derived Highly Oriented MOF Electrodes

Metal organic frameworks (MOFs) are considered as promising candidates for supercapacitors because of high specific area and potential redox sites. However, their shuffled orientations and low conductivity nature lead to severely‐degraded performance. Designing an accessibly‐manipulated and efficient method to address those issues is of outmost significance for MOF application in supercapacitors. It is the common way that MOFs scarify themselves as templates or precursors to prepare target products. But to reversely think it, using target products to prepare MOF could be the way to unlock the bottleneck of MOFs' performance in supercapacitors. Herein, a novel strategy using Co(OH)₂ as both the template and precursor to fabricate vertically‐oriented MOF electrode is proposed. The electrode shows a double high specific capacitance of 1044 Fg^?1 and excellent rate capability compared to MOF in powder form. An asymmetric supercapacitor was also fabricated, which delivers a maximum energy density of 28.5 W h kg^?1 at a power density of 1500 W kg^?1, and the maximum of 24000 W kg^?1 can be obtained with a remaining energy density of 13.3 W h kg^?1. Therefore, the proposed strategy paves the way to unlock the inherent advantages of MOFs and also inspires for advanced MOF synthesis with optimum performance.     

3D Architecture Materials Made of NiCoAl‐LDH Nanoplates Coupled with NiCo‐Carbonate Hydroxide Nanowires Grown on Flexible Graphite Paper for Asymmetric Supercapacitors

Asymmetric supercapacitors featuring both high energy and power densities as well as a long lifespan are much sought after and may become a reality depending on the availability of cheap yet highly active electrode materials. Here, a novel flexible architecture electrode made of NiCoAl‐layered double hydroxide (NiCoAl‐LDH) nanoplates coupled with NiCo‐carbonate hydroxide (NiCo‐CH) nanowires, grown on graphite paper via an in situ, one‐step, hydrothermal method is reported. The nanowire‐like NiCo‐CH species in the nanoplate matrix function as a scaffold and support the dispersion of the NiCoAl‐LDH nanoplates, resulting in a relatively loose and open structure within the electrode matrix. Asymmetric supercapacitors fabricated using the nanohybrids as the positive electrode and a typical activated carbon (AC) as negative electrode show a high energy density of 58.9 Wh kg^?1 at a power density of 0.4 kW kg^?1, which is based on the total mass of active materials at a voltage of 1.6 V. An energy density of 14.9 Wh kg^?1 can be retained even at a high power density of 51.5 kW kg^?1. Our asymmetric supercapacitor also exhibits an excellent long cycle life, whereby a specific capacitance of 97% is retained even after 10 000 cycles.     

An Aqueous Zn‐Ion Hybrid Supercapacitor with High Energy Density and Ultrastability up to 80 000 Cycles

Integrating a battery‐type electrode to build a hybrid supercapacitor is a promising approach to improve the overall energy density of a supercapacitor‐type energy storage device without sacrificing its power output. However, this strategy is usually achieved at the expense of cycling lifespan. In this work, a hybrid supercapacitor comprising Zn foil and porous carbon derived from chemical activated graphene (aMEGO) is developed, and the trade‐off between energy density and cycling life is well‐balanced by the utilization of 3 m Zn(CF₃SO₃)₂ electrolyte with high Zn stripping/plating efficiency. Such a hybrid supercapacitor demonstrates an energy density of 106.3 Wh kg^?1 and a power density of 31.4 kW kg^?1, and significantly a wide operation voltage of 1.9 V is achieved in aqueous electrolyte. Benefitting from the high Zn stripping/plating efficiency, the Zn‐aMEGO hybrid‐supercapacitor also exhibits an ultralong cycling life up to 80 000 cycles with capacity retention of 93%, which is comparable to that of conventional electrochemical double‐layer capacitors.     

A Novel High‐Energy Hybrid Supercapacitor with an Anatase TiO2–Reduced Graphene Oxide Anode and an Activated Carbon Cathode

A hybrid supercapacitor with high energy and power densities is reported. It comprises a composite anode of anatase TiO₂ and reduced graphene oxide and an activated carbon cathode in a non‐aqueous electrolyte. While intercalation compounds can provide high energy typically at the expense of power, the anatase TiO₂ nanoparticles are able to sustain both high energy and power in the hybrid supercapacitor. At a voltage range from 1.0 to 3.0 V, 42 W h kg^?1 of energy is achieved at 800 W kg^?1. Even at a 4‐s charge/discharge rate, an energy density as high as 8.9 W h kg^?1 can be retained. The high energy and power of this hybrid supercapacitor bridges the gap between conventional batteries with high energy and low power and supercapacitors with high power and low energy.     

NiCo2S4 Nanosheets Grown on Nitrogen‐Doped Carbon Foams as an Advanced Electrode for Supercapacitors

To push the energy density limit of supercapacitors, a new class of electrode materials with favorable architectures is strongly needed. Binary metal sulfides hold great promise as an electrode material for high‐performance energy storage devices because they offer higher electrochemical activity and higher capacity than mono‐metal sulfides. Here, the rational design and fabrication of NiCo₂S₄ nanosheets supported on nitrogen‐doped carbon foams (NCF) is presented as a novel flexible electrode for supercapacitors. A facile two‐step method is developed for growth of NiCo₂S₄ nanosheets on NCF with robust adhesion, involving the growth of Ni‐Co precursor and subsequent conversion into NiCo₂S₄ nanosheets through sulfidation process. Benefiting from the compositional features and 3D electrode architectures, the NiCo₂S₄/NCF electrode exhibits greatly improved electrochemical performance with ultrahigh capacitance (877 F g^?1 at 20 A g^?1) and excellent cycling stability. Moreover, a binder‐free asymmetric supercapacitor device is also fabricated by using NiCo₂S₄/NCF as the positive electrode and ordered mesoporous carbon (OMC)/NCF as the negative electrode; this demonstrates high energy density (≈45.5 Wh kg^?1 at 512 W kg^?1).     

Controlled Growth of NiMoO4 Nanosheet and Nanorod Arrays on Various Conductive Substrates as Advanced Electrodes for Asymmetric Supercapacitors

Hierarchical NiMoO₄ architectures assembled from well‐aligned uniform nanosheets or nanorods are successfully grown on various conductive substrates using a facile and effective general approach. Importantly, the nanostructures of NiMoO₄ can be easily controlled to be nanosheets or nanorods by using different solvents. By virtue of their intriguing structure features, NiMoO₄ nanosheets as integrated additive‐free electrodes for supercapacitors manifest higher Faradaic capacitance than NiMoO₄ nanorods. Moreover, an asymmetric supercapacitor (ASC) is constructed using the as‐prepared NiMoO₄ nanosheets as the positive electrode and activated carbon (AC) as the negative electrode. The optimized ASC with an extended operating voltage range of 0–1.7 V displays excellent electrochemical performance with a high energy density of 60.9 Wh kg^?1 at a power density of 850 W kg^?1 in addition to superior rate capability. Furthermore, the NiMoO₄//AC ASC device exhibits remarkable cycling stability with 85.7% specific capacitance retention after 10 000 cycles. The results show that these NiMoO₄‐based nanostructures are promising for high‐energy supercapacitors.     

Molecularly Stacking Manganese Dioxide/Titanium Carbide Sheets to Produce Highly Flexible and Conductive Film Electrodes with Improved Pseudocapacitive Performances

2D nanostructures with high surface area and flexibility are regarded as a promising building platform for flexible supercapacitors that are attracting tremendous attention due to their potential applications in various wearable technologies. Notably, although pseudocapacitive metal oxides are widely accepted as a very important class of electrochemically active materials, the utilization of 2D metal oxide sheets in the preparation of flexible supercapacitors is very rare. The scarcity of a suitable filler with the integrated properties of both high conductivity and excellent hydrophilicity is probably to blame. In this work, by introducing a recently discovered intriguing material, Ti₃C₂ sheets, a novel MnO₂/Ti₃C₂ hybrid with a molecularly stacked structure is developed using a simple and scalable mixing and filtration method. Their individual advantages are combined in the hybrid, thus delivering excellent electrochemical performances. A highly flexible and symmetric supercapacitor based on the novel hybrid electrode manifests top‐class electrochemical performance with maximum energy and power densities of 8.3 W h kg^?1 (at 221.33 W kg^?1) and 2376 W kg^?1 (at 3.3 W h kg^?1), respectively, regardless of the various bending states, suggesting enormous possibilities for applications in future flexible and portable micropower systems.     

Large‐Scale Conductive Yarns Based on Twistable Korean Traditional Paper (Hanji) for Supercapacitor Applications: Toward High‐Performance Paper Supercapacitors

A simple and scalable method to fabricate a yarn‐type supercapacitor with a large specific capacitance without the aid of traditional pseudocapacitive electrode materials such as conducting polymers and metal oxides is reported. The yarn‐type supercapacitors are made from twisting reduced graphene oxide (rGO) or/and single‐walled carbon nanotubes (SWNTs)‐coated Korean traditional paper (KTP). The yarn‐type paper supercapacitor displays surprisingly enhanced electrochemical capacitance values, showing synergistic effect between rGO and SWNTs (500 times larger than performance of yarn‐type rGO‐coated paper supercapacitors). Coating rGO or/and SWNTs on KTP gives good morphology to the composite film, in which porosity increases and mean pore diameter decreases. The yarn‐type rGO/SWNT paper supercapacitor shows good mechanical strength, high flexibility, excellent electrochemical performance, and long‐life operation. The yarn‐type supercapacitor has an excellent electrochemical performance with a specific capacitance of 366 F g^?1 at scan rate of 25 mV s^?1 and high stability without any degradation in electrical performance up to 10 000 charge–discharge cycles. The average capacitance of rGO/SWNT@KTP yarn‐type supercapacitors is seven times higher than that of sheet‐type supercapacitors at scan rate of 500 mV s^?1. The lighting of a red light‐emitting diode (LED) is demonstrated by the yarn‐type paper supercapacitor without connecting supercapacitors in series.     

Harmonizing Energy and Power Density toward 2.7 V Asymmetric Aqueous Supercapacitor

Tremendous research efforts are devoted to developing wide potential window aqueous supercapacitors to resolve their low energy density concern. While the operational potential window is dictated by the intrinsic electrochemical stability of water (1.23 V), such a bottleneck may be surpassed by leveraging the additional overpotential of the oxygen evolution reaction and the hydrogen evolution reaction (HER). Herein, by employing an electroreduction technique, Na⁺ is adsorbed onto the carbon negative electrode which effectively acts as a physical barrier to hinder intermediate HER product formation, thereby reducing HER activity. To complement the wide potential carbon electrode, Na_0.25MnO₂ is employed as the positive electrode to take advantage of the extra energy (i.e., increased overpotential) required for Na⁺ insertion process into the structure. The asymmetric supercapacitor exhibits high energy density of 61.1 W h kg^?1 at a power density of 982 W kg^?1, and even at an ultrahigh power density of 42.9 kW kg^?1, a respectable energy density of 16.3 W h kg^?1 is attained. In addition, 93.7% capacitance retention is recorded after cycling for 10 000 cycles which further demonstrates its suitability as supercapacitor. The present success in fabricating a 2.7 V asymmetric supercapacitor will open a promising research route toward achieving high energy density and high power density.     

Battery‐like Supercapacitors from Vertically Aligned Carbon Nanofiber Coated Diamond: Design and Demonstrator

To fabricate battery‐like supercapacitors with high power and energy densities, big capacitances, as well as long‐term capacitance retention, vertically aligned carbon nanofibers (CNFs) grown on boron doped diamond (BDD) films are employed as the capacitor electrodes. They possess large surface areas, high conductivity, high stability, and importantly are free of binder. The large surface areas result from their porous structures. The containment of graphene layers and copper metal catalysts inside CNFs leads to their high conductivity. Both electrical double layer capacitors (EDLCs) in inert solutions and pseudocapacitors (PCs) using Fe(CN)₆^3?/4? redox‐active electrolytes are constructed with three‐ and two‐electrode systems. The assembled two‐electrode symmetrical supercapacitor devices exhibit capacitances of 30 and 48 mF cm^?2 at 10 mV s^?1 for EDLC and PC devices, respectively. They remain constant even after 10 000 charging/discharging cycles. The power densities are 27.3 and 25.3 kW kg^?1 for EDLC and PC devices, together with their energy densities of 22.9 and 44.1 W h kg^?1, respectively. The performance of these devices is superior to most of the reported supercapacitors and batteries. Vertically aligned CNF/BDD hybrid films are thus useful to construct high‐performance battery‐like and industry‐orientated supercapacitors for future power devices.     

High‐Performance Fiber‐Shaped All‐Solid‐State Asymmetric Supercapacitors Based on Ultrathin MnO2 Nanosheet/Carbon Fiber Cathodes for Wearable Electronics

Flexible fiber‐shaped supercapacitors have shown great potential in portable and wearable electronics. However, small specific capacitance and low operating voltage limit the practical application of fiber‐shaped supercapacitors in high energy density devices. Herein, direct growth of ultrathin MnO₂ nanosheet arrays on conductive carbon fibers with robust adhesion is exhibited, which exhibit a high specific capacitance of 634.5 F g^?1 at a current density of 2.5 A g^?1 and possess superior cycle stability. When MnO₂ nanosheet arrays on carbon fibers and graphene on carbon fibers are used as a positive electrode and a negative electrode, respectively, in an all‐solid‐state asymmetric supercapacitor (ASC), the ASC displays a high specific capacitance of 87.1 F g^?1 and an exceptional energy density of 27.2 Wh kg^?1. In addition, its capacitance retention reaches 95.2% over 3000 cycles, representing the excellent cyclic ability. The flexibility and mechanical stability of these ASCs are highlighted by the negligible degradation of their electrochemical performance even under severely bending states. Impressively, as‐prepared fiber‐shaped ASCs could successfully power a photodetector based on CdS nanowires without applying any external bias voltage. The excellent performance of all‐solid‐state ASCs opens up new opportunity for development of wearable and self‐powered nanodevices in near future.     

Nanostructured Ternary Electrodes for Energy‐Storage Applications

A three‐component, flexible electrode is developed for supercapacitors over graphitized carbon fabric, utilizing γ‐MnO₂ nanoflowers anchored onto carbon nanotubes (γ‐MnO₂/CNT) as spacers for graphene nanosheets (GNs). The three‐component, composite electrode doubles the specific capacitance with respect to GN‐only electrodes, giving the highest‐reported specific capacitance (308 F g^?1) for symmetric supercapacitors containing MnO₂ and GNs using a two‐electrode configuration, at a scan rate of 20 mV s^?1. A maximum energy density of 43 W h kg^?1 is obtained for our symmetric supercapacitors at a constant discharge‐current density of 2.5 A g^?1 using GN–(γ‐MnO₂/CNT)‐nanocomposite electrodes. The fabricated supercapacitor device exhibits an excellent cycle life by retaining ≈90% of the initial specific capacitance after 5000 cycles.     

Vanadium Oxide Nanowire–Carbon Nanotube Binder‐Free Flexible Electrodes for Supercapacitors

Vanadium pentoxide (V₂O₅) layered nanostructures are known to have very stable crystal structures and high faradaic activity. The low electronic conductivity of V₂O₅ greatly limits the application of vanadium oxide as electrode materials and requires combining with conducting materials using binders. It is well known that the organic binders can degrade the overall performance of electrode materials and need carefully controlled compositions. In this study, we develop a simple method for preparing freestanding carbon nanotube (CNT)‐V₂O₅ nanowire (VNW) composite paper electrodes without using binders. Coin cell type (CR2032) supercapacitors are assembled using the nanocomposite paper electrode as the anode and high surface area carbon fiber electrode (Spectracarb 2225) as the cathode. The supercapacitor with CNT‐VNW composite paper electrode exhibits a power density of 5.26 kW Kg^?1 and an energy density of 46.3 Wh Kg^?1. (Li)VNWs and CNT composite paper electrodes can be fabricated in similar manner and show improved overall performance with a power density of 8.32 kW Kg^?1 and an energy density of 65.9 Wh Kg^?1. The power and energy density values suggest that such flexible hybrid nanocomposite paper electrodes may be useful for high performance electrochemical supercapacitors.     

All‐Printed MnHCF‐MnOx‐Based High‐Performance Flexible Supercapacitors

Here, a simple active materials synthesis method is presented that boosts electrode performance and utilizes a facile screen‐printing technique to prepare scalable patterned flexible supercapacitors based on manganese hexacyanoferrate‐manganese oxide and electrochemically reduced graphene oxide electrode materials (MnHCF‐MnO_x/ErGO). A very simple in situ self‐reaction method is developed to introduce MnO_x pseudocapacitor material into the MnHCF system by using NH₄F. This MnHCF‐MnO_x electrode materials can deliver excellent capacitance of 467 F g^?1 at a current density of 1 A g^?1, which is a 2.4 times capacitance increase compared to MnHCF. In addition a printed, patterned, flexible MnHCF‐MnO_x/ErGO supercapacitor is fabricated, showing a remarkable areal capacitance of 16.8 mF cm^?2 and considerable energy and power density of 0.5 mWh cm^?2 and 0.0023 mW cm^?2, respectively. Furthermore, the printed patterned flexible supercapacitors also exhibit exceptional flexibility, and the capacitance remains stable, even while bending to various angles (60°, 90°, and 180°) and for 100 cycles. The flexible supercapacitor arrays integrated by multiple prepared single supercapacitors can power various LEDs even in the bent states. This approach offers promising opportunities for the development of printable energy storage materials and devices with high energy density, large scalability, and excellent flexibility.     

Antimonene: A Novel 2D Nanomaterial for Supercapacitor Applications

In pursuing higher energy density, without compromising the power density of supercapacitor platforms, the application of an advanced 2D nanomaterial is utilized to maximize performance. Antimonene, for the first time, is characterized as a material for applications in energy storage, being applied as an electrode material as the basis of a supercapacitor. Antimonene is shown to significantly improve the energy storage capabilities of a carbon electrode in both cyclic voltammetry and galvanostatic charging. Antimonene demonstrates remarkable performance with a capacitance of 1578 F g^?1, with a high charging current density of 14 A g^?1. Hence, antimonene is shown to be a highly promising material for energy storage applications. The system also demonstrates a highly competitive energy and power densities of 20 mW h kg^?1 and 4.8 kW kg^?1_, respectively. In addition to the excellent charge storing abilities, antimonene shows good cycling capabilities.     

Rational Construction of Nitrogen‐Doped Hierarchical Dual‐Carbon for Advanced Potassium‐Ion Hybrid Capacitors

Potassium‐ion hybrid capacitors (PIHCs), elaborately integrate the advantages of high output power as well as long lifespan of supercapacitors and the high energy density of batteries, and exhibit great possibilities for the future generations of energy storage devices. The critical next step for future implementation lies in exploring a high‐rate battery‐type anode with an ultra‐stable structure to match the capacitor‐type cathode. Herein, a “dual‐carbon” is constructed, in which a three‐dimensional nitrogen‐doped microporous carbon polyhedron (NMCP) derived from metal‐organic frameworks is tightly wrapped by two‐dimensional reduced graphene oxide (NMCP@rGO). Benefiting from the synergistic effect of the inner NMCP and outer rGO, the NMCP@rGO exhibits a superior K‐ion storage capability with a high reversible capacity of 386 mAh g^?1 at 0.05 A g^?1 and ultra‐long cycle stability with a capacity of 151.4 mAh g^?1 after 6000 cycles at 5.0 A g^?1. As expected, the as‐assembled PIHCs with a working voltage as high as 4.2 V present a high energy/power density (63.6 Wh kg^?1 at 19 091 W kg^?1) and excellent capacity retention of 84.7% after 12 000 cycles. This rational construction of advanced PIHCs with excellent performance opens a new avenue for further application and development.     

Spatial Charge Storage within Honeycomb‐Carbon Frameworks for Ultrafast Supercapacitors with High Energy and Power Densities

Carbon‐based supercapacitors store charge through the adsorption of electrolyte ions onto the carbon surface. Therefore, it would be more attractive for the enhanced charge storage if the locations for storing charge can be extended from carbon surface to space. Here, a novel spatial charge storage mechanism based on counterion effect from Fe(CN)₆^3? ions bridged by oxygen groups and confined into honeycomb‐carbon frameworks is presented, which can provide additionally spatial charge storage for electrical double‐layer capacitances in a negative potential region and pseudocapacitances from Fe(CN)₆^3?/Fe(CN)₆^4? in a positive potential region. More importantly, an ultrafast supercapacitor based on this novelty carbon can be charged/discharged within 0.7 s to deliver both high specific energy of 15 W h kg^?1 and ultrahigh specific power of 79.1 kW kg^?1 in 1 m Na₂SO₄ electrolyte, much higher than those of previously reported asymmetric supercapacitors in aqueous electrolytes, as well as excellent cycling stability. These features suggest a new generation of ultrafast asymmetric supercapacitors as novel high‐performance energy storage devices.     

In Situ Formation of Co9S8 Quantum Dots in MOF‐Derived Ternary Metal Layered Double Hydroxide Nanoarrays for High‐Performance Hybrid Supercapacitors

Layered double hydroxides (LDHs) are promising cathode materials for supercapacitors because of the enhanced flow efficiency of ions in the interlayers. However, the limited active sites and monotonous metal species further hinder the improvement of the capacity performance. Herein, cobalt sulfide quantum dots (Co₉S₈‐QDs) are effectively created and embedded within the interlayer of metal‐organic‐frameworks‐derived ternary metal LDH nanosheets based on in situ selective vulcanization of Co on carbon fibers. The hybrid CF@NiCoZn‐LDH/Co₉S₈‐QD retains the lamellar structure of the ternary metal LDH very well, inheriting low transfer impedance of interlayer ions. Significantly, the selectively generated Co₉S₈‐QDs expose more abundant active sites, effectively improving the electrochemical properties, such as capacitive performance, electronic conductivity, and cycling stability. Due to the synergistic relationship, the hybrid material delivers an ultrahigh electrochemical capacity of 350.6 mAh g^?1 (2504 F g^?1) at 1 A g^?1. Furthermore, hybrid supercapacitors fabricated with CF@NiCoZn‐LDH/Co₉S₈‐QD and carbon nanosheets modified by single‐walled carbon nanotubes display an outstanding energy density of 56.4 Wh kg^?1 at a power density of 875 W kg^?1, with an excellent capacity retention of 95.3% after 8000 charge–discharge cycles. Therefore, constructing hybrid electrode materials by in situ‐created QDs in multimetallic LDHs is promising.