Responses of Coptotermes formosanus and Reticulitermes flavipes (Isoptera: Rhinotermitidae) to three types of wood rot fungi cultured on different substrates

This study examined the responses of two termite species, the Formosan subterranean termite, Coptotermes formosanus Shiraki, and the eastern subterranean termite, Reticulitermes flavipes (Kollar), to three types of wood decay fungi: a brown rot fungus, Gloeophyllum trabeum (Persoon: Fries) Murrill; a white rot fungus, Phanerochaete chrysosporium Burdsall; and a litter rot fungus, Marasmiellus troyanus (Murrill) Singer. We also examined the responses of termites to these three types of fungi grown on different substrates. For all three fungal species, both termite species showed a strong preference for fungus-infected sawdust over uninfected sawdust. In choice tests, both termite species preferred sawdust infected with either M. troyanus or P. chrysosporium over G. trabeum. However, termites did not show any preference for fungus-infected potato dextrose agar over uninfected potato dextrose agar. Tunneling activity of C. formosanus was greater in sand treated with methanol extracts of fungus-infected sawdust than in sand treated with extracts of uninfected sawdust. Because chemicals in the fungal extracts caused termites to tunnel further into treated sand than untreated sand, these chemicals could potentially be used to direct termite foraging toward bait stations in the field.     

Nutritional ecology of the formosan subterranean termite (Isoptera: Rhinotermitidae): feeding response to commercial wood species

The feeding preferences of the Formosan subterranean termite, Coptotermes formosanus Shiraki, were tested in three separate experiments on 28 different wood species. Experiment 1 was a multiple-choice test designed to test relative preferences among 24 wood species commercially available in New Orleans, LA. Experiment 2 was a similar study designed to test relative preferences among 21 wood species shown or reported to be unpalatable to the Formosan subterranean termite. Experiment 3 was a no-choice test to examine the feeding deterrence of the 10 least preferred wood species. Preference was determined by consumption rates. Birch (Betula alleghaniensis Britton), red gum (Liquidambar styraciflua L.), Parana pine [Araucaria angustifolia (Bert.) 1, sugar maple (Acer saccharum Marsh.), pecan (Carya illinoensis Wangenh.), and northern red oak (Quercus rubra L.) were the most preferred species by C. formosanus in order of consumption rate. All of these species were significantly more preferred than southern yellow pine (Pinus taeda L.), widely used for monitoring. Sinker cypress [ = old growth bald cypress, Taxodium distichum (L.)], western red cedar (Thuja plicata Donn), Alaskan yellow cedar (Chamaecyparis nootkatensis D. Don), eastern red cedar (Juniperus virginiana L.), sassafras [Sassafras albidum (Nutt.)], Spanish cedar (Cedrella odorata L.), Honduras mahogany (Swietenia macrophyla King), Indian rosewood (Dalbergia latifolia Roxb.), Honduras rosewood (D. stevensonii Standl.), and morado (Machaerium sp.) induced significant feeding deterrence and mortality to C. formosanus. The last eight species produced 100% mortality after 3 mo.     

Feeding preference of Coptotermes formosanus (Isoptera: Rhinotermitidae) for gamma-irradiated wood impregnated with benzoylphenylurea compounds under laboratory conditions

The feeding preference of Coptotermes formosanus Shiraki (Isoptera: Rhinotermitidae) for 200-kGy gamma-irradiated Cryptomeria japonica D. Don (Japanese cedar) sapwood impregnated with benzoylphenylurea compounds such as hexaflumuron and noviflumuron was examined by three laboratory tests. Although termites were not deterred from feeding on gamma-irradiated wood samples that had been impregnated with hexaflumuron or noviflumuron, termite mortality was significantly higher compared with solvent controls in the no-choice test. All live termites were transferred to paper disks immediately after the no-choice test to investigate changes in mortality with time, and this test also confirmed the effects of hexaflumuron and noviflumuron on worker termites, which showed a significant feeding preference for gamma-irradiated wood. Only the 1480 ppm noviflumuron-impregnated gamma-irradiated wood specimens showed significant differences in mortality in the two-choice test. These results suggest that gamma-irradiated C. japonica wood, which is locally abundant in Japan, may have potential as a bait substrate for benzoylphenylurea compounds.     

Comparative durability of untreated wood in use above ground

Cross-brace units constructed of 10 different softwoods and nine different hardwoods were exposed on a test fence in Wisconsin for up to 22 years. Sapwood was included for all species and heartwood for some. The objective of this study was to determine the above-ground longevity of these woods against decay. The wood was classified into above-ground decay resistance groups. The longevity spans apply only to structural components similar in cross-sectional size to the test units used in this study. Millwork and fencing components may fit into this category. Woods estimated to last more than 20 years above ground, and thus classified as most resistant, included the heartwood of Douglas-fir, western white pine, redwood, Eucalyptus sp., red and white oak, lodgepole pine, ponderosa pine, western red cedar, and the sapwood of redwood, white oak, and red oak. No woods fell into the nonresistant class ( 7 years expected average life). The remaining woods were classified moderately resistant or resistant based upon service lives of 8 to 13 and 14 to 19 years, respectively.     

Decay and termite resistance of medium density fiberboard (MDF) made from different wood species

Medium density fiberboard (MDF) production worldwide is increasing due to the development of new manufacturing technologies. As a result, MDF products are increasingly utilized in traditional wood applications that require fungal and insect resistance. This study evaluated the ability of white and brown rot fungi and termites to decompose MDF consisting of different wood species by measuring weight loss. Furnish in the boards was prepared from heart and sapwood portions of pine (Pinus nigra Arnold var. pallasiana), beech (Fagus orientalis Lipsky), and European oak (Quercus robur L.) species. Fungal decay resistance tests were performed according to ASTM D 2017-81 standard method using two brown-rot fungi, Gloeophyllum trabeum (Pers. ex Fr.) Murr. (Mad 617), Postia placenta (Fries) M. Larsen et Lombard (Mad 698), and one white-rot fungus, Trametes versicolor (L. ex Ft.) Pilat (Mad 697). MDF and wood specimens were also bioassayed against the eastern subterranean termite, Reticulitermes flavipes (Kollar) in order to determine termite resistance of the specimens. MDF specimens containing oak and mixed furnish demonstrated increased durability against decay fungi. Only pine, oak, and mixed MDF specimens met the 25% or less weight loss limit to be classified resistant according to ASTM D 2017-81 standard method. Overall, MDF specimens made from oak showed better performance than oak solid wood specimens. Accelerated aging according to ASTM D 1037-96a standard method before fungal bioassay decreased fungal resistance of the specimens. In contrast to the fungal bioassay, MDF specimens made from beech and mixed furnish showed decreased weight losses from termite attack after 4 weeks. However, none of the MDF specimens were resistant to termite attack. In severe conditions, the MDFs may require the incorporation of chemical biocides prior to board production for increasing the resistance of MDF to termite attack.     

Field Evaluations of Subterranean Termite Preference for Sap-Stain Inoculated Wood

Few studies have focused on interactions between subterranean termites and the ophiostomatoid fungal associates of pine bark beetles or root feeding weevils. Field stake tests were employed at four locations throughout Mississippi to determine the feeding preference of subterranean termites for blue-stained, unstained, and partially decayed southern pine sapwood stakes. This study also utilized wood decayed by Gloeophyllum trabeum, a fungus previously shown to elicit a positive subterranean termite feeding response, as a positive control. Stakes inoculated with G. trabeum received significantly more attacks than all other treatments after 16 weeks. Of the stakes attacked by subterranean termites, stakes inoculated with Ophiostoma minus were degraded faster than any other treatment. Subterranean termite preference for stakes treated with either of two Leptographium spp. and the untreated negative controls did not differ; however, each was fed upon less than all other treatments. The feeding rate on stakes inoculated with O. ips and G. trabeum being fed upon by subterranean termites was not significantly different. These results represent the first evidence of wood containing non-structurally degrading fungi (O. ips and O. minus) eliciting a feeding preference from subterranean termites greater than that of decayed wood. The implications of these results are particularly relevant to pine forest ecology, nutrient cycling, subterranean termite control, and the utilization of blue-stained southern pine building products in the southeastern U.S.     

Survey of subterranean termites (Isoptera: Rhinotermitidae) in a managed silvicultural plantation in Portugal, using a line-intersection method (LIS)

Subterranean termites (Reticulitermes grassei) were surveyed over successive seasons in a managed eucalyptus plantation in southeastern Portugal for 26 months. Termite activity in seven diameter categories of lying dead wood was investigated by a modified line intersection method (LIS). Each item sampled was inspected and assessed for termite attack and for general (i.e. fungal) decay status using standard protocols. Line intersection is quantitative to the extent that it can link foraging and decay parameters to woody biovolume. It was found that termites selected items with larger diameter, the observed trend showing an exponential character with greater termite attack as diameter increased. Attack by termites was positively associated with prior decay by fungi. A clear positive relationship was shown between rainfall and total woody biovolume containing live termites, underlining the importance of moisture for termite activity. Subterranean termites appeared to be important wood decomposers in the woodland studied, with an average of 30% of lying dead wood branches showing signs of termite attack.     

Do the unique properties of nanometals affect leachability or efficacy against fungi and termites?

Nanotechnology has the potential to affect the field of wood preservation through the creation of new and unique metal biocides with improved properties. This study evaluated leachability and efficacy of southern yellow pine wood treated with copper, zinc, or boron nanoparticles against mould fungi, decay fungi, and Eastern subterranean termites. Results showed that nanocopper with and without surfactant, nanozinc, and nanozinc plus silver with surfactant resisted leaching compared with metal oxide controls. Nearly all nanoboron and boric acid was released from the treated wood specimens during leaching. Mould fungi were moderately inhibited by nanozinc oxide with surfactant, but the other nanometal preparations did not significantly inhibit mould fungi. Mass loss from Gloeophyllum trabeum was significantly inhibited by all copper preparations, while Antrodia sp. was not inhibited by nanometal treatments. Nanometals imparted high resistance in southern yellow pine to the white-rot fungus, Trametes versicolor. Unleached specimens treated with nanoboron or nanozinc plus surfactant caused 100% and 31% mortality, respectively. All specimens treated with nanozinc or nanozinc plus silver inhibited termite feeding, but the copper treatments were less effective against termites. Nanozinc possessed the most favorable properties: leach resistance, termite mortality, and inhibition of termite feeding and decay by the white-rot fungus.     

Isolation of wood-inhabiting fungi from Canadian hardwood logs

Wood-inhabiting fungi include many molds, wood-staining fungi, and decay fungi. Most of these fungal species can result in economic losses to wood users. Studies on molds, staining fungi, and decay fungi are necessary to be able to control their growth on wood and wood products. In this study, wood-inhabiting fungi were isolated from logs of 3 major Canadian hardwood species: sugar maple, white birch, and yellow birch. Two media were used for isolation. From these 3 wood species, a total of 1198 fungal cultures were obtained from summer- and winter-harvested logs in dry storage and under water sprinkling. The results showed that most fungal species were not host specific and affected all of the wood species tested. Frequently isolated molds were Alternaria alternata, Trichoderma species, and Mucor/Rhizopus (Zygomycota) species, frequently isolated staining fungi were Ophiostoma piceae and Ophiostoma piliferum, a frequently isolated bark saprophyte was Nectria cinnabarina, and frequently isolated decay fungi were taxa of the phylum Basidiomycota. More fungal species were isolated from summer-harvested logs than from winter-harvested logs. Fewer fungal cultures, especially decay fungi, were isolated from logs in early storage than from logs in late storage.     

Effect of Summon Preferred Food Source on feeding, tunneling, and bait station discovery by the formosan subterranean termite (Isoptera: Rhinotermitidae)

This study evaluated the effect of Summon Preferred Food Source on feeding, tunneling, and bait station discovery by the Formosan subterranean termite, Coptotermes formosanus Shiraki. Bioassays were conducted to determine whether Summon disks affected the aggregation and feeding behavior of termites and to determine whether the presence of Summon disks caused increased recruitment of termites to wood blocks. When termites encountered the disk, they immediately clustered on top of the disk. Termites were observed aggregating on top of the disk throughout the experiment. Consumption of Summon disks was significantly greater than consumption of cardboard disks in paired choice tests. The presence of a Summon disk on top of a wood block caused a significant increase in consumption of the wood block. Bioassays also were conducted to determine whether water extracts of Summon disks affected termite behavior. Consumption of filter paper disks treated with a water extract of Summon disks was significantly greater than consumption of control filter paper disks. Termites tunneled through sand treated with a water extract of Summon disks faster than they tunneled through untreated sand. In a field test, the rate of infestation of monitoring stations with a Summon disk was 3 times greater than the rate of infestations of stations without a disk.     

Evaluation of different lignocellulosic substrates for the production of cellulases and xylanases by the basidiomycete fungi <Emphasis Type="Italic">Bjerkandera adusta</Emphasis> and <Emphasis Type="Italic">Pycnoporus sanguineus</Emphasis>

Agricultural waste products are potential resources for the production of a number of industrial compounds, including biofuels. Basidiomycete fungi display a battery of hydrolytic enzymes with prospective use in lignocellulosic biomass transformation, however little work has been done regarding the characterization of such activities. Growth in several lignocellulosic substrates (oak and cedar sawdust, rice husk, corn stubble, wheat straw and Jatropha seed husk) and the production of cellulases and xylanases by two basidiomycete fungi: Bjerkandera adusta and Pycnoporus sanguineus were analyzed. Growth for P. sanguineus was best in rice husk while corn stubble supported the highest growth rate for B. adusta. Among the substrates tested, cedar sawdust produced the highest cellulolytic activities in both fungal species, followed by oak sawdust and wheat straw. Xylanolytic activity was best in oak and cedar sawdust for both species. We found no correlation between growth and enzyme production. Zymogram analysis of xylanases and cellulases showed that growth in different substrates produced particular combinations of protein bands with hydrolytic activity.     

Measuring wood consumption by subterranean termites (Isoptera: Rhinotermitidae) with digitized images

A method is described in which consumption by termites of a feeding block composed of 36 thin (2-mm) wooden slats is estimated with a video image analysis. The significant regression between dry wood weight loss and decreased pixel count of digitized images demonstrates that the video image technique may be a useful tool to quantify termite feeding. Time required to measure wood consumption with the video image technique (approximately 11.5 min per sample) was significantly less than that for the manual method of washing, and weighing wooden blocks damaged by termite feeding (approximately 21.0 min per sample).     

Evaluation of mold,decay and termite resistance of pine wood treated with zinc- and copper-based nanocompounds

In this work, the resistance of black pine wood (Pinus nigra L.) vacuum-treated with zinc oxide, zinc borate and copper oxide nanoparticles against mold and decay fungi and the subterranean termites was evaluated. Some of the nanocompounds tested were forced with acrylic emulsions to avoid leaching. Results showed that mold fungi were slightly inhibited by nanozinc borate, while the other nanometal preparations did not inhibit mold fungi. Mass loss from fungal attack by Trametes versicolor was significantly inhibited by the zinc-based preparations, while the brown-rot fungus, Tyromyces palustris was not inhibited by the nanometal treatments. Notably, nanozinc borate plus acrylic emulsion imparted very high resistance in pine wood to the white-rot fungus, T. versicolor with a mass loss of 1.8%. Following leaching, all pine specimens treated with nanozinc borate, with or without acrylic emulsion, strongly inhibited termite feeding, i.e. mass losses varying at 5.2–5.4%. In contrast, the copper-based treatments were much less effective against the subterranean termites, Coptotermes formosanus. In general, nanozinc borate possessed favorable properties, that is, inhibition of termite feeding and decay by T. versicolor.     

Initial decay of woody fragments in soil is influenced by size, vertical position, nitrogen availability and soil origin

Fast-growing bacteria and fungi are expected to cause the initial stage of decomposition of woody fragments in and on soils, i.e. the respiration of sugars, organic acids, pectin and easily accessible cellulose and hemi-cellulose. However, little is known about the factors regulating initial wood decomposition. We examined the effect of wood fragment size, vertical position, nitrogen addition and soil origin on initial wood decay and on the relative importance of fungi and bacteria therein. Two fractions of birch wood were used in microcosm experiments, namely wood blocks (dimensions: 3 × 0.5 × 0.5 cm) and sawdust (dimensions: 0.5–2 mm). The woody fragments were enclosed in nylon bags and placed on top of- or buried in an abandoned arable soil and in a heathland soil. After 15, 25 and 40 weeks of incubation, fungal biomass was quantified (as ergosterol and chitin content) and bacterial numbers were determined. The results indicated that initial wood decay was mostly caused by fungi; bacteria were only contributing in sawdust in/on abandoned arable soil. Larger fragment size, burial of fragments and nitrogen addition positively influenced fungal biomass and activity. Fungal biomass and decay activities were much lower in woody fragments incubated in/on heathland soil than in those incubated in/on abandoned arable soil, indicating that soil origin is also an important factor determining initial wood decay.     

A comparison of two methods for sampling assemblages of subterranean,wood-eating termites (Isoptera)

Abstract Within a 50 × 50 m area of wandoo Eucalyptus capillosa woodland in the Western Australian wheatbelt, the diversity and frequency of occurrence of wood-eating termite species was assessed at two food types. Over a 12 month period, monthly termite activity was determined: (i) at sound/undecayed artificial baits (seasoned wooden stakes of Jarrah, Karri, Pine, Batu, Oregon; Jarrah sawdust; paper rolls); and (li) at naturally occurring timber, fallen logs and branches of wandoo, in varying stages of decay. Termite diversity was 11 species at baits, 18 species at wandoo out of an overall site richness of 21 species. Karri attracted the most species (9); sawdust attracted none. At wandoo, Nasutitermes exitiosus, Coptotermes acinaciformis and Occasitermes occasus accounted for 59% of samples where termites were recorded. At baits, Heterotermes occiduus accounted for a mean of 80% of samples across bait types, but was rarely sampled at wandoo (5% of samples). Only H. occiduus, C. acinaciformis and Amitermes neogermanus ate bait. Pine, Oregon and paper rolls were most effective in attracting foraging termites in terms of highest per cent of replicates showing bait consumption and highest consumption rates. Jarrah and Batu were least attractive to foraging termites. Samples from wandoo underestimated the relative frequency of occurrence of H. occiduus within the study site. Coptotermes acinaciformis, which attack large food items, and certain species of Amitermes, which forage on subterranean food, may have been underestimated by both sampling methods. These findings indicate that a proper understanding of the structure of wood-eating termite assemblages within a given area requires a composite sampling strategy which addresses termites that eat sound or decayed wood, as well as surface and subsurface foragers.     

Chemical constituents of tropical woods and resistance to the invasive drywood termite Cryptotermes brevis

Wood-feeding, nesting and production of secondary reproductives are key determinant traits of invasive species of drywood termites, and the West Indian drywood termite Cryptotermes brevis (Walker) is one of their major examples of worldwide concern as pest species of structural lumber, furniture and other wood products. The problem and losses by this species are determined by the prevailing wood characteristics. However, despite the current widespread occurrence of this species in the tropics, except Asia, tropical wood resistance and underlying mechanisms of resistance against this termite are scarcely known. Nonetheless, wood hardness and particularly wood density were recently recognized as important underlying traits for C. brevis resistance in tropical woods, but the chemical wood constituents were not considered. Here, we assessed tropical wood resistance to the invasive termite species C. brevis and tested the relevance of their holocellulose, lignin and (total) extractive contents preventing termite infestation. Free-choice and no-choice tests were carried out in parallel with wood chemical characterization. Resistance to the West Indian termite varied with wood species in terms of both colonization and consumption, but only under free-choice testing because without choice, no significant difference was detected among wood species. Regardless, none of these traits were significantly correlated with wood resistance to C. brevis. Therefore, wood physical resistance, particularly wood density, seems the main recognized determinant of tropical wood resistance against the West Indian drywood termite. The pattern of termite movement on the surface of soft, mid and hard wood was also consistent with this conclusion.     

The recolonization of the Krakatau islands by termites (Isoptera), and their biogeographical origins

The termite assemblages of the Krakatau islands and five sites in Sumatra and Java were investigated, using a standardized transect sampling method. Five species were found on the Krakatau islands that have not been collected there before. The total number of termites recorded on the islands since the 1883 volcanic eruption is now twelve species, all of which are wood feeders. No termites nesting in or feeding on the soil were found on the Krakataus, suggesting that rafting in wood is the primary method by which the termites recolonized the islands.     

Diet is the primary determinant of bacterial community structure in the guts of higher termites

The gut microbiota of termites plays critical roles in the symbiotic digestion of lignocellulose. While phylogenetically ‘lower termites’ are characterized by a unique association with cellulolytic flagellates, higher termites (family Termitidae) harbour exclusively prokaryotic communities in their dilated hindguts. Unlike the more primitive termite families, which primarily feed on wood, they have adapted to a variety of lignocellulosic food sources in different stages of humification, ranging from sound wood to soil organic matter. In this study, we comparatively analysed representatives of different taxonomic lineages and feeding groups of higher termites to identify the major drivers of bacterial community structure in the termite gut, using amplicon libraries of 16S rRNA genes from 18 species of higher termites. In all analyses, the wood‐feeding species were clearly separated from humus and soil feeders, irrespective of their taxonomic affiliation, offering compelling evidence that diet is the primary determinant of bacterial community structure. Within each diet group, however, gut communities of termites from the same subfamily were more similar than those of distantly related species. A highly resolved classification using a curated reference database revealed only few genus‐level taxa whose distribution patterns indicated specificity for certain host lineages, limiting any possible cospeciation between the gut microbiota and host to short evolutionary timescales. Rather, the observed patterns in the host‐specific distribution of the bacterial lineages in termite guts are best explained by diet‐related differences in the availability of microhabitats and functional niches.     

Foraging choice and replacement reproductives facilitate invasiveness in drywood termites

All highly cryptic drywood termites derive their food and water from a single piece of wood. Despite the fact that most species share the same life cycles, only a few have become invasive tramp species. Variation in production of replacement reproductives and food size choice were determined for nine species of the important drywood genus Cryptotermes in a test with two different sized wooden blocks. Four native, non-pest species produced one or two reproductives, gnawed short tunnels and chose large blocks; four tramp pest species produced three or four reproductives, gnawed long tunnels and two species chose small blocks whereas the other two species chose both blocks; the ninth species, a native pest, was similar to tramp species. Longer tunnels and more replacement reproductives corresponded with pest status, acceptance of small blocks with tramp status. Although counter-intuitive, the foraging acceptance or preference for small blocks of wood corresponds with higher propagule pressure and an increased chance of (unwitting) human assisted transport, and therefore may be an important factor in determining tramp status of drywood termite species.