Cationic metal-specific structures adopted by the poly(dG) region and the direct repeats in the chicken adult beta A globin gene promoter.

Naturally occurring contiguous deoxyguanine residues and their surrounding sequences in the chicken adult beta A globin gene promoter were analyzed for their inherent potential to adopt non-B DNA structures in supercoiled plasmid DNA. In particular, cationic effects on structure were studied by treating the supercoiled plasmid DNA harboring the chicken adult beta A globin 5' flanking sequence with an unpaired DNA base-specific probe, chloroacetaldehyde in the presence of either Mg++, Cu++, Zn++, Ca++ or Co++ ions. The chloroacetaldehyde-reactive bases were mapped at a single base resolution by a chemical cleavage method that specifically cleaves DNA at the chloroacetaldehyde modified sites. These experiments revealed that while Mg++ and Ca++ ions induce a dG.dG.dC triple helix structure at the contiguous dG residues, Zn++, Cu++ and Co++ ions induce yet another structure at the direct repeats immediately 5' of the dG residues. When Mg++ and Zn++ ions are both present, Zn++ inhibits the dG.dG.dC triplex at the contiguous dG residues and induces a particular non-B DNA structure at the adjacent direct repeats. The specific induction of non-B DNA structures by metal ions at the two adjacent sequences within the promoter region may be of biological significance.     

Poly(dG)-poly(dC) sequences, under torsional stress, induce an altered DNA conformation upon neighboring DNA sequences

Supercoiled plasmid DNAs (at bacterial superhelical density) harboring the homopurine-homopyrimidine sequence, poly(dG)-poly(dC), were reacted with bromoacetaldehyde (BAA), a reagent that reacts with unpaired DNA bases. Not only did the poly(dG)-poly(dC) sequence react with BAA but, surprisingly, neighboring sequences located 3' to the contiguous G sequences also reacted. The altered conformation in the poly(dG)-poly(dC) sequence and in the neighboring sequence occurred in the same supercoiled plasmid DNA molecule. Furthermore, the occurrence of an "unpaired" conformation in the neighboring sequence is strictly due to a positional effect, since it is observed when the poly(dG)-poly(dC) segment is adjacent to a variety of neighboring sequences.     

Endonuclease G: a (dG)n X (dC)n-specific DNase from higher eukaryotes.

An endonuclease activity (termed endonuclease G) that selectively cleaves DNA at (dG)n X (dC)n tracts has been partially purified from immature chicken erythrocyte nuclei. Sites where n greater than or equal to 9 are cleaved in a manner that resembles types II and III restriction nucleases. The nicking rate of the G-strand is 4- to 10-fold higher than that of the C-strand depending on the length of the (dG)n X (dC)n tract and/or nucleotide composition of the flanking sequences. Endonuclease G hydrolyzes (dG)24 X (dC)24 of supercoiled DNA in a bimodal way every 9-11 nucleotides, the maxima in one strand corresponding to minima in the opposite, suggesting that it binds preferentially to one side of the double helix. The nuclease produces 5' phosphomonoester ends and its activity is dependent on Mg2+ or Mn2+. The wide distribution and high relative activity of endonuclease G in a variety of tissues and species argues for a general role of the enzyme. The striking correlation between genetic instability and poly(dG) X poly(dC) tracts in DNA suggests that these sequences and endonuclease G are involved in recombination processes.     

Poly(dG)-poly(dC) DNA appears shorter than poly(dA)-poly(dT) and possibly adopts an A-related conformation on a mica surface under ambient conditions

Three types of DNA: approximately 2700 bp polydeoxyguanylic olydeoxycytidylic acid [poly(dG)-poly(dC)], approximately 2700 bp polydeoxyadenylic polydeoxythymidylic acid [poly(dA)-poly(dT)] and 2686 bp linear plasmid pUC19 were deposited on a mica surface and imaged by atomic force microscopy. Contour length measurements show that the average length of poly(dG)-poly(dC) is approximately 30% shorter than that of poly(dA)-poly(dT) and the plasmid. This led us to suggest that individual poly(dG)-poly(dC) molecules are immobilized on mica under ambient conditions in a form which is likely related to the A-form of DNA in contrast to poly(dA)-poly(dT) and random sequence DNA which are immobilized in a form that is related to the DNA B-form.     

Intramolecular dG.dG.dC triplex detected in Escherichia coli cells.

The formation of an intramolecular dG.dG.dC triplex in Escherichia coli cells is demonstrated at single-base resolution. The intramolecular dG.dG.dC triplex structure was probed in situ for E. coli cells containing plasmid DNAs with varying lengths of poly(dG).poly(dC) tracts employing chloroacetaldehyde. This chemical probe reacts specifically with unpaired DNA bases. The triplex structure formed with the poly(dG).poly(dC) tracts of 35 and 44 base-pairs, but not with 25 base-pairs. The triplex was detected only one to two hours after the chloramphenicol treatment: the period at which the extracted plasmid DNA revealed the maximal superhelical density.     

Synthesis of novel poly(dG)-poly(dG)-poly(dC) triplex structure by Klenow exo- fragment of DNA polymerase I

The extension of the G-strand of long (700 bp) poly(dG)–poly(dC) by the Klenow exo⁻ fragment of DNA polymerase I yields a complete triplex structure of the H-DNA type. High-performance liquid chromatography analysis demonstrates that the length of the G-strand is doubled during the polymerase synthesis. Fluorescence resonance energy transfer analysis shows that the 5′ ends of the G- and the C-strands, labeled with fluorescein and TAMRA, respectively, are positioned close to each other in the product of the synthesis. Atomic force microscopy morphology imaging shows that the synthesized structures lack single-stranded fragments and have approximately the same length as the parent 700 bp poly(dG)–poly(dC). CD spectrum of the polymer has a large negative peak at 278 nm, which is characteristic of the poly(dG)–poly(dG)–poly(dC) triplex. The polymer is resistant to DNase and interacts much more weakly with ethidium bromide as compared with the double-stranded DNA.     

Minor groove binding of Co(III)meso-tetrakis(N-methylpyridinium-4-yl)porphyrin to various duplex and triplex polynucleotides

The binding site and the geometry of Co(III)meso-tetrakis(N-methylpyridinium-4-yl)porphyrin (CoTMPyP) complexed with double helical poly(dA).poly(dT) and poly(dG).poly(dC), and with triple helical poly(dA).[poly(dT)](2) and poly(dC).poly(dG).poly(dC)(+) were investigated by circular and linear dichroism (CD and LD). The appearance of monomeric positive CD at a low [porphyrin]/[DNA] ratio and bisignate CD at a high ratio of the CoTMPyP-poly(dA).poly(dT) complex is almost identical with its triplex counterpart. Similarity in the CD spectra was also observed for the CoTMPyP-poly(dG).poly(dC) and -poly(dC).poly(dG).poly(dC)(+) complex. This observation indicates that both monomeric binding and stacking of CoTMPyP to these polynucleotides occur at the minor groove. However, different binding geometry of CoTMPyP, when bind to AT- and GC-rich polynucleotide, was observed by LD spectrum. The difference in the binding geometry may be attributed to the difference in the interaction between polynucleotides and CoTMPyP: in the GC polynucleotide case, amine group protrude into the minor groove while it is not present in the AT polynucleotide.     

Central non-Pur.Pyr sequences in oligo(dG.dC) tracts and metal ions influence the formation of intramolecular DNA triplex isomers.

The effect of the central non-Pur.Pyr sequences in oligo(dG.dC) inserts on determining the type of intramolecular DNA triplex isomers formed in negatively supercoiled plasmids was investigated. Different triplex types (H-r3, H-r5, and H-y3), revealed by a combination of chemical probing and Maxam-Gilbert sequencing reactions, were adopted by the oligo(dG.dC) tracts depending on the length and composition of the central non-Pur.Pyr sequences (0, 3, or 5 base pairs) and the kind of metal ions. The H-r3 triplex conformer, one isomer of a Pur.Pur.Pyr structure, was formed in the (C)20 and (C)10GCG(C)10 inserts in plasmids in the presence of certain metal ions. Interestingly, H-r5, the other isomer of the Pur.Pur-Pyr triplex which had not been detected previously, was formed in a (C)9GAATT(C)9 insert in the presence of either Mg2+ or Ca2+. Alternatively, H-y3, one isomer of a Pyr.Pur.Pyr triplex, was formed in the (C)9GAATT(C)9 insert in the absence of metal ions. Thus, central non-Pur.Pyr sequences and metal ions play a role as determinants of the types of intramolecular triplexes formed; they also reduce the requirement of longer Pur.Pyr repeat sequences to form intramolecular triplexes. Furthermore, the effects of MgCl2 concentration and pH on the formation of triplex isomers were examined. The Pur.Pur.Pyr conformations (H-r3 and H-r5) may be the favored conformations in the cellular milieu, since they are stable at physiological pH and metal ion concentration.     

Triple helical polynucleotidic structures: an FTIR study of the C+ .G. Ctriplet.

Triple helixes containing one homopurine poly dG or poly rG strand and two homopyrimidine poly dC or poly rC strands have been prepared and studied by FTIR spectroscopy in H2O and D2O solutions. The spectra are discussed by comparison with those of the corresponding third strands (auto associated or not) and of double stranded poly dG.poly dC and poly rG.poly rC in the same concentration range and salt conditions. The triplex formation is characterized by the study of the base-base interactions reflected by changes in the spectral domain involving the in-plane double bond vibrations of the bases. Modifications of the initial duplex conformation (A family form for poly rG.poly rC, B family form for poly dG.poly dC) when the triplex is formed have been investigated. Two spectral domains (950-800 and 1450-1350 cm-1) containing absorption bands markers of the N and S type sugar geometries have been extensively studied. The spectra of the triplexes prepared starting with a double helix containing only riboses (poly rC+.poly rG.poly rC and poly dC+.poly rG.poly rC) as well as that of poly rC+.poly dG.poly dC present exclusively markers of the North type geometry of the sugars. On the contrary in the case of the poly dC+.poly dG.poly dC triplex both N and S type sugars are shown to coexist. The FTIR spectra allow us to propose that in this case the sugars of the purine (poly dG) strand adopt the S type geometry.     

Minor groove binding of Co(III)meso-tetrakis(N-methylpyridinium-4-yl)porphyrin to various duplex and triplex polynucleotides

The binding site and the geometry of Co(III)meso-tetrakis(N-methylpyridinium-4-yl)porphyrin (CoTMPyP) complexed with double helical poly(dA)·poly(dT) and poly(dG)·poly(dC), and with triple helical poly(dA)·[poly(dT)]₂ and poly(dC)·poly(dG)·poly(dC)⁺ were investigated by circular and linear dichroism (CD and LD). The appearance of monomeric positive CD at a low [porphyrin]/[DNA] ratio and bisignate CD at a high ratio of the CoTMPyP-poly(dA)·poly(dT) complex is almost identical with its triplex counterpart. Similarity in the CD spectra was also observed for the CoTMPyP-poly(dG)·poly(dC) and -poly(dC)·poly(dG)·poly(dC)⁺ complex. This observation indicates that both monomeric binding and stacking of CoTMPyP to these polynucleotides occur at the minor groove. However, different binding geometry of CoTMPyP, when bind to AT- and GC-rich polynucleotide, was observed by LD spectrum. The difference in the binding geometry may be attributed to the difference in the interaction between polynucleotides and CoTMPyP: in the GC polynucleotide case, amine group protrude into the minor groove while it is not present in the AT polynucleotide.     

The structure of the guanine-rich polypurine:polypyrimidine sequence at the right end of the rat L1 (LINE) element

We report here that the 64-base pair (bp) guanine-rich polypurine:polypyrimidine tract derived from the right end of the rat long interspersed DNA element is reactive in a supercoil-dependent manner with a variety of chemical probes of non-B DNA structure. At pH 5.0 in the presence of Mg2+, part of the sequence (position 10-40) forms the following two types of triplexes: a G.G.C triplex, and an unusual C.G.C triplex. The latter structure is much more prevalent than the former and is unusual in that the resultant free purine strand forms a hairpin loop. In the absence of Mg2+ the G.G.C triplex disappears and the amount of C.G.C triplex is diminished, and at pH 7.5 in the presence or absence of Mg2+, little or no triplex is observed. Deletion of the 24-bp region just 3' of the triplex-forming region greatly reduces the amount of triplex formed. In this region, which includes an 18-bp polypurine:polypyrimidine sequence, both strands exhibit a moderate symmetric reactivity with the chemical probes tested, independent of pH and Mg2+. The implications of this structurally complex region for the properties of the rat L1 element are discussed.     

The isolation of duplex DNA fragments containing (dG.dC) clusters by chromatography on poly(rC)-Sephadex.

Duplex DNA containing oligo(dG.dC)-rich clusters can be isolated by specific binding to poly(rC)-Sephadex. This binding, probably mediated by the formation of an oligo(dG.dC)rC+ triple helix, is optimal at pH 5 in 50% formamide, 2 M LiCl; the bound DNA is recovered by elution at pH 7.5. Using this method we find that the viral DNAs PM2, lambda and SV40 contain at least 1, 1 and 2 sites for binding to poly(rC)-Sephadex, respectively. These binding sites have been mapped in the case of SV40; the binding sites can in turn be used for physical mapping studies of DNAs containing (dG.dC) clusters. Inspection of the sequence of the bound fragments of SV40 DNA shows that a (dG.dC)6-7 tract is required for the binding of duplex DNA to poly(rC)-Sephadex. Although about 60% of rabbit DNA cleaved with restriction endonuclease KpnI binds to poly(rC)-Sephadex, no binding is observed for the 5.1 kb DNA fragment generated by KpnI digestion, which contains the rabbit beta-globin gene. This indicates that oligo(dG.dC) clusters are not found close to the rabbit beta-globin gene.     

Protonated polynucleotide structures, 20. Interaction between poly(dG)-poly(dC) and poly(rC).1.

A study of the interaction between poly(dG)-poly(dC) and poly(rC) demonstrates that, at neutral pH and high ionic strength, there is replacement of the dC strand by poly(rC). At acid pH, formation of a triple-stranded complex which equally may involve the replacement phenomenon is observed. There is no evidence for interaction at neutral pH between poly(dG)-poly(dC) and oligo(rC), while a three-stranded complex is formed at acid pH. These data are consistent with the studies of comparative stabilities of double stranded deoxy or ribo polymers and deoxy-ribo hybrids.     

Monoclonal antibodies specific for poly(dG) X poly(dC) and poly(dG) X poly(dm5C)

Most duplex DNAs that are in the "B" conformation are not immunogenic. One important exception is poly(dG) X poly(dC), which produces a good immune response even though, by many criteria, it adopts a conventional right-handed helix. In order to investigate what features are being recognized, monoclonal antibodies were prepared against poly(dG) X poly(dC) and the related polymer poly(dG) X poly(dm5C). Jel 72, which is an immunoglobulin G, binds only to poly(dG) X poly(dC), while Jel 68, which is an immunoglobulin M, binds approximately 10-fold more strongly to poly(dG) X poly(dm5C) than to poly(dG) X poly(dC). For both antibodies, no significant interaction could be detected with any other synthetic DNA duplexes including poly[d(Gm5C)] X poly[d(Gm5C)] in both the "B" and "Z" forms, poly[d(Tm5Cm5C)] X poly[d(GGA)], and poly[d(TCC)] X poly[d(GGA)], poly(dI) X poly(dC), or poly(dI) X poly(dm5C). The binding to poly(dG) X poly(dC) was inhibited by ethidium and by disruption of the DNA duplex, confirming that the antibodies were not recognizing single-stranded or multistranded structures. Furthermore, Jel 68 binds significantly to phage XP-12 DNA, which contains only m5C residues and will precipitate this DNA in the absence of a second antibody. The results suggest that (dG)n X (dm5C)n sequences in natural DNA exist in recognizably distinct conformations.     

Comparison of base inclination in ribo-GC and deoxybribo-GC polymers,and synthesis of poly(rGrC)-poly(rGrC)

The inclination angle between the base normal and the helix axis, and the axes around which the bases incline, are measured for ribo-GC polymers in buffer by using flow linear dichroism (LD), and compared to measurements for deoxyribo-GC polymers in buffer and under dehydrating conditions. A new method is designed to synthesize poly(rGrC) -poly(rGrC), which is not available commercially, in large quantities. The LD of this RNA reveals inclination angles that are similar to the B-form DNA in buffer, although the axes are different. The CD of poly(dGdC)-poly(dGdC) under the dehydrating conditions is similar to poly(rGrC)-poly(rGrC), indicating it is in the A form, and the LD gives larger inclination angles than either the B form or the corresponding RNA. Poly(dG)-poly(dC) is in the A form in buffer. Comparison among poly(rG)-poly(rC) in buffer, and poly (dG)-poly(dC) in buffer and under dehydrating conditions, reveals similar inclination angles and axes, although the LD shows that the DNA has the largest inclination angles. Except for poly(rGrC)-poly(rGrC), which has a unique reduced dichroism, all the axes for G are similar, as are the axes for C. © 1995 John Wiley & Sons, Inc.     

Homopolymer tract length dependent enrichments in functional regions of 27 eukaryotes and their novel dependence on the organism DNA (G+C)% composition

Background  

DNA homopolymer tracts, poly(dA).poly(dT) and poly(dG).poly(dC), are the simplest of simple sequence repeats. Homopolymer tracts have been systematically examined in the coding, intron and flanking regions of a limited number of eukaryotes. As the number of DNA sequences publicly available increases, the representation (over and under) of homopolymer tracts of different lengths in these regions of different genomes can be compared.     

Protonated polynucleotides structures - 22.CD study of the acid-base titration of poly(dG).poly(dC)

The acid-base titration (pH 8 --> pH 2.5 --> pH 8) of eleven mixing curve samples of the poly(dG) plus poly(dC) system has been performed in 0.15 M NaCl. Upon protonation, poly(dG).poly(dC) gives rise to an acid complex, in various amounts according to the origin of the sample. We have established that the hysteresis of the acid-base titration is due to the non-reversible formation of an acid complex, and the liberation of the homopolymers at the end of the acid titration and during the base titration: the homopolymer mixtures remain stable up to pH 7. A 1G:1C stoichiometry appears to be the most probable for the acid complex, a 1G:2C stoichiometry, as found in poly(C(+)).poly(I).poly(C) or poly(C(+)).poly(G).poly(C), cannot be rejected. In the course of this study, evidence has been found that the structural consequences of protonation could be similar for both double stranded poly(dG).poly(dC) and G-C rich DNA's: 1) protonation starts near pH 6, dissociation of the acid complex of poly(dG).poly(dC) and of protonated DNA take place at pH 3; 2) the CD spectrum computed for the acid polymer complex displays a positive peak at 255 nm as found in the acid spectra of DNA's; 3) double stranded poly(dG).poly(dC) embedded in triple-stranded poly(dG).poly(dG).poly(dC) should be in the A-form and appears to be prevented from the proton induced conformational change. The neutral triple stranded poly(dG).poly(dG).poly(dC) appears therefore responsible, although indirectly, for the complexity and variability of the acid titration of poly(dG).poly(dC) samples.     

Binding mode of 4',6-diamidino-2-phenylindole and ethidium to poly(dG).poly(dC).poly(dC)(+) triplex and poly(dG).poly(dC) duplex

Optical spectroscopic properties of 4',6-diamidino-2-phenylindole (DAPI) and ethidium bromide complexed with poly(dG).poly(dC).poly(dC)(+) triplex and poly(dG).poly(dC) duplex were compared in this study. When complexed with both duplex and triplex, ethidium is characterized by hypochromism and a red shift in the absorption spectrum, a complicate induced circular dichroism (CD) band in the polynucleotide absorption region, and a negative reduced linear dichroism signal in both polynucleotide and drug absorption regions. The spectral properties for both duplex- and triplex-bound ethidium are identical and both can be understood by the intercalation binding mode. In contrast, the absorption and CD spectra of DAPI complexed with triplex differ from those of the DAPI-duplex complex, although both complexes can be understood by the intercalation binding mode. Considering that the third strand runs along the major groove of the template duplex, we conclude that the DAPI molecule partially intercalates near the major groove of the duplex, where the third strand can affect its spectroscopic properties.     

Substrate specificity of Ca2+,Mg2+-dependent DNAase from sea urchin (Strongylocentrotus intermedius) embryos

Ca2+,Mg2+-dependent DNAse from sea urchin embryos is specific to the secondary structure of substrates irrespective of the nature of activating cations. The enzyme does not split synthetic single-stranded oligo and polynucleotides, such as d(pTpTpTpCpC), d(pGpGpTpTpT). d(pApApTpTpC), d(pGpApApTpTpC), d(pA)5-poly(dT), d(pApApTpTpC)-poly(dT), poly(dA) and poly (dT) and hydrolyses the double-stranded substrates poly d(AT), poly (dA) . poly (dT) and highly polymerized DNA. Native double-stranded DNA from salmon and phage T7 is split by the enzyme at a higher rate than that of denaturated DNA of salmon and single-stranded DNA of phage M13. The high rate of poly(dA) . poly(dT) and poly d(AT) hydrolysis and the stability of poly(dG) . poly(dC) to the effect of the enzyme suggest a certain specificity of the enzyme to the nature of nitrogenous bases at the hydrolyzed phosphodiester bond of the substrate.     

Assembling of G-strands into novel tetra-molecular parallel G4-DNA nanostructures using avidin-biotin recognition

We describe a method for the preparation of novel long (hundreds of nanometers), uniform, inter-molecular G4-DNA molecules composed of four parallel G-strands. The only long continuous G4-DNA reported so far are intra-molecular structures made of a single G-strand. To enable a tetra-molecular assembly of the G-strands we developed a novel approach based on avidin–biotin biological recognition. The steps of the G4-DNA production include: (i) Enzymatic synthesis of long poly(dG)-poly(dC) molecules with biotinylated poly(dG)-strand; (ii) Formation of a complex between avidin-tetramer and four biotinylated poly(dG)-poly(dC) molecules; (iii) Separation of the poly(dC) strands from the poly(dG)-strands, which are connected to the avidin; (iv) Assembly of the four G-strands attached to the avidin into tetra-molecular G4-DNA. The average contour length of the formed structures, as measured by AFM, is equal to that of the initial poly(dG)-poly(dC) molecules, suggesting a tetra-molecular mechanism of the G-strands assembly. The height of tetra-molecular G4-nanostructures is larger than that of mono-molecular G4-DNA molecules having similar contour length. The CD spectra of the tetra- and mono-molecular G4-DNA are markedly different, suggesting different structural organization of these two types of molecules. The tetra-molecular G4-DNA nanostructures showed clear electrical polarizability. This suggests that they may be useful for molecular electronics.