Influence of immobilization on the stability of pTG201 recombinant plasmid in some strains of Escherichia coli

The stability of pTG201 plasmid was examined by continuous culture in three genetically different Escherichia coli hosts. Two types of experiment were carried out, one with free cells and one with immobilized cells. When cells were cultivated in free continuous culture in the absence of antibiotic selection, the plasmid was maintained with various degrees of stability in the three host organisms. By contrast, in continuous culture with immobilized cells, plasmid pTG201 was stably maintained in the three strains. We showed that the increase in pTG201 stability in immobilized cells is due neither to plasmid transfer between immobilized cells nor to an increase of the plasmid copy number of immobilized cells. We also showed that plasmid-free cells, when coimmobilized and grown in competition with plasmid-containing cells, cannot overrun the culture.     

Influence of immobilization on the stability of pTG201 recombinant plasmid in some strains of Escherichia coli.

The stability of pTG201 plasmid was examined by continuous culture in three genetically different Escherichia coli hosts. Two types of experiment were carried out, one with free cells and one with immobilized cells. When cells were cultivated in free continuous culture in the absence of antibiotic selection, the plasmid was maintained with various degrees of stability in the three host organisms. By contrast, in continuous culture with immobilized cells, plasmid pTG201 was stably maintained in the three strains. We showed that the increase in pTG201 stability in immobilized cells is due neither to plasmid transfer between immobilized cells nor to an increase of the plasmid copy number of immobilized cells. We also showed that plasmid-free cells, when coimmobilized and grown in competition with plasmid-containing cells, cannot overrun the culture.     

Effect of environmental growth conditions on plasmid stability, plasmid copy number, and catechol 2,3-dioxygenase activity in free and immobilized Escherichia coli cells

In order to better understand the high plasmid stability in immobilized recombinant E. coli cells, the effects of dilution rate on the pTG201 plasmid stability, the copy number, and the catechol 2,3-dioxygenase (encoded by XyIE gene) production were, at first, studied in free E. coli W3101 continuous cultures in minimal media. It was found that decreasing specific growth rate increased the plasmid copy number and the catechol 2,3-dioxygenase activity but the stability decreased. In continuous culture with immobilized cells, an increase was shown in plasmid copy number and catechol 2,3-dioxygenase activity probably due to the distribution of growth in the gel beads. Besides mechanical properties of gel beads which may allow limited cell divisions, the increase in plasmid copy number is involved in enhanced plasmid stability in immobilized cells. In the same way, an experiment conducted in LB medium dealing with competition between pTG201-free and pTG201-containing E. coli B cells was described. It was shown that the competition was not more pronounced in gel bead compared to a free system. The effects of nutritional limitations on pTG201 plasmid stability and catechol 2,3-dioxygenase activity during chemostat cultivations in free and immobilized E. coli B cells were also investigated. It was found that immobilization of cells increased the stability of pTG201 even under glucose, nitrogen, or phosphate limited cultures. However in the case of magnesium depleted culture, pTG201 was shown to be relatively instable and a decrease in viable cell number during the immobilized continuous culture was observed. By contrast to the free system, the catechol 2,3-dioxygenase activity increased in immobilized cells under all culture conditions used.     

Integrative, xylE-based promoter probe vectors for use in Streptomyces

Two promoter probe plasmid vectors, designated pIPP1 and pIPP2, were constructed from the existing plasmids pXE4 and pSET152. pIPP1 and 2 use the xylE gene of Pseudomonas putida as a reporter and can be transferred to streptomycetes by conjugation from Escherichia coli. The function of these plasmids as promoter probes was demonstrated in Streptomyces antibioticus and Streptomyces coelicolor using the phenoxazinone synthase and polynucleotide phosphorylase promoters from S. antibioticus. xylE activity could be detected in colonies on agar plates or via the in vitro assay for catechol dioxygenase. The integration into the S. antibioticus chromosome of the constructs containing the phsA promoter was verified by Southern blotting. The presence of the bla locus in pIPP1 allows the recovery of putative promoters by marker rescue.     

Plasmid instabilities of single and three-plasmid systems in Escherichia coli during continuous cultivation.

Plasmid instabilities in E. coli JM103 carrying three plasmids (pRK248cI, pMTC48, pEcoR4) and a single plasmid system (pTG206) for the production of fusion EcoRI (SPA::EcoRI) and catechol 2,3-dioxygenase, respectively, were investigated in continuous cultures under selective and non-selective conditions. In a three-plasmid system, pRK248cI was lost gradually together with pMTC48 from the host under non-selective conditions. The selective pressure against pRK248cI stabilized the pMTC48. This indicates that the loss of pMTC48 under non-selective conditions was caused by the loss of cI857 gene (coded by pRK248cI) which resulted in the overproduction of the toxic gene product (coded by pMTC48). In the case of single plasmid (pTG206) system, the plasmid lost from the host under non-selective conditions. This plasmid was stabilized in the host growing under selective conditions. During this period we obtained some ampicillin resistant colonies which gave low levels of enzyme activities compared to the normal plasmid bearing cells. Plasmid analysis from the above cells showed that the plasmid has undergone structural instability. Further, restriction analysis of this plasmid exhibited an additional PvuII site in a 0.9 kbp fragment that was integrated near the tet promoter which controls the expression of the xyl E gene, thereby resulting low levels of enzyme activities. Our results indicate that some of the IS elements which are present in the host chromosome were responsible for such instabilities to turn off the synthesis by inserting into the tet promoter region to lower the protein formation during the bioprocess.     

Stability without selection pressure of the plasmid pTG 201 during continuous fermentation of Escherichia coli BZ 18 immobilized in a carrageenan gel

Escherichia coli BZ 18 harboring the plasmid pTG 201 and immobilized in carrageenan gel beads in continuous culture without selection pressure, provides a better stability of the plasmid than free cells, with an approximately equal production of biomass.     

Agitation rate effects on plasmid stability in immobilized and free-cell continuous cultures of recombinant E. coli.

Escherichia coli B/pTG201 recombinant cells were immobilized by entrapment in a carrageenan gel and cultivated in nonselective media to investigate the effect of agitation rate on plasmid stability, biomass concentration, and enzyme productivity. These parameters were studied in continuous cultures for free and immobilized cells, respectively. Immobilized recombinant cells exhibit an increase in the stability of the plasmid pTG201 compared to free cells, even under conditions where the tendency of plasmid stability for free cells decreased generally more rapidly under a higher agitation rate. Intensive agitation, resulting also in a strong shear stress, greatly reduced cell concentration within gel beads throughout the course of growth. Higher enzyme expression of catechol 2–3, dioxygenase was also obtained in leaked cells due to better maintenance of plasmid stability and higher plasmid copy number with regard to free cells. Enzyme productivity of leaked and free cells in minimal medium decreased with the increase in agitation rate, due to decreased plasmid stability; however, in LB medium, it increased in the presence of higher agitation rate related to important cell concentration.     

Agitation rate effects on plasmid stability in immobilized and free-cell continuous cultures of recombinant E. coli

Escherichia coli B/pTG201 recombinant cells were immobilized by entrapment in a carrageenan gel and cultivated in nonselective media to investigate the effect of agitation rate on plasmid stability, biomass concentration, and enzyme productivity. These parameters were studied in continuous cultures for free and immobilized cells, respectively. Immobilized recombinant cells exhibit an increase in the stability of the plasmid pTG201 compared to free cells, even under conditions where the tendency of plasmid stability for free cells decreased generally more rapidly under a higher agitation rate. Intensive agitation, resulting also in a strong shear stress, greatly reduced cell concentration within gel beads throughout the course of growth. Higher enzyme expression of catechol 2–3, dioxygenase was also obtained in leaked cells due to better maintenance of plasmid stability and higher plasmid copy number with regard to free cells. Enzyme productivity of leaked and free cells in minimal medium decreased with the increase in agitation rate, due to decreased plasmid stability; however, in LB medium, it increased in the presence of higher agitation rate related to important cell concentration.     

Streptomyces marker plasmids for monitoring survival and spread of streptomycetes in soil.

Plasmid constructs pNW1 through pNW6 containing a controllable xylE gene (for catechol 2,3-dioxygenase) were introduced into Streptomyces lividans strains to provide a selectable marker system. xylE functions in S. lividans under the control of bacteriophage lambda promoters lambda pL and lambda pR. Thermoregulated expression of xylE is provided through the lambda repressor cI857. Catechol 2,3-dioxygenase activity was increased 2.8-fold from plasmid construct pNW2 (lambda pL, xylE, cI857) and 9.5- and 7.4-fold from constructs pNW3 (lambda pR, xylE, cI857) and pNW5 (lambda pR, xylE, cI857), respectively, when the temperature was shifted from 28 degrees C to 37 degrees C. The stability of the constructs varied from 4.7% for pNW2 to 99.4% for pNW4 (lambda pL, xylE) over two rounds of sporulation. Marked S. lividans strains released into soil systems retained the XylE phenotype for more than 80 days, depending on the marker plasmid, when examined by a selective plating method. Furthermore, S. lividans harboring plasmid pNW5 was detectable by nucleic acid hybridization at less than 10 CFU g-1 (dry weight) of soil as mycelium and 10(3) CFU g-1 (dry weight) of soil as spores with the xylE marker DNA extracted from soil and amplified by using the polymerase chain reaction.     

Streptomyces marker plasmids for monitoring survival and spread of streptomycetes in soil.

Plasmid constructs pNW1 through pNW6 containing a controllable xylE gene (for catechol 2,3-dioxygenase) were introduced into Streptomyces lividans strains to provide a selectable marker system. xylE functions in S. lividans under the control of bacteriophage lambda promoters lambda pL and lambda pR. Thermoregulated expression of xylE is provided through the lambda repressor cI857. Catechol 2,3-dioxygenase activity was increased 2.8-fold from plasmid construct pNW2 (lambda pL, xylE, cI857) and 9.5- and 7.4-fold from constructs pNW3 (lambda pR, xylE, cI857) and pNW5 (lambda pR, xylE, cI857), respectively, when the temperature was shifted from 28 degrees C to 37 degrees C. The stability of the constructs varied from 4.7% for pNW2 to 99.4% for pNW4 (lambda pL, xylE) over two rounds of sporulation. Marked S. lividans strains released into soil systems retained the XylE phenotype for more than 80 days, depending on the marker plasmid, when examined by a selective plating method. Furthermore, S. lividans harboring plasmid pNW5 was detectable by nucleic acid hybridization at less than 10 CFU g-1 (dry weight) of soil as mycelium and 10(3) CFU g-1 (dry weight) of soil as spores with the xylE marker DNA extracted from soil and amplified by using the polymerase chain reaction.     

New cloning vectors for integration in the lambda attachment site attB of the Escherichia coli chromosome.

A set of plasmid cloning vectors has been constructed, allowing the integration of any DNA fragment into the bacteriophage lambda attachment site attB of the Escherichia coli chromosome. The system is based upon two components: (i) a number of cloning vectors containing the lambda attachment site attP and (ii) a helper plasmid, bearing the lambda int gene, transcribed from the lambda PR promoter under the control of the temperature-sensitive repressor cI857. The DNA fragment of interest is cloned into the multicloning site of one of the attP-harboring plasmids. Subsequently, the origin of the plasmid, located on a cloning cassette, is cut out and the DNA becomes newly ligated, resulting in a circular DNA molecule without replication ability. The strain of choice, containing the int gene carrying helper plasmid, is transformed with this DNA molecule and incubated at 42 degrees C to induce int gene expression. Additionally, the temperature shift leads to the loss of the helper plasmid after a few cell generations, because the replication ability of its replicon is blocked at 42 degrees C. These vectors have been successfully used for integration of several promoter-lacZ fusions into the chromosome. The ratio between integration due to homologous recombination and Int protein-mediated integration has been determined.