Crystal structure and iron-binding properties of the R210K mutant of the N-lobe of human lactoferrin: implications for iron release from transferrins

Lactoferrin (Lf) and serum transferrin (Tf) combine high-affinity iron binding with an ability to release this iron at reduced pH. Lf, however, retains iron to significantly lower pH than Tf, giving the two proteins distinct functional roles. In this paper, we compared the iron-release profiles for human Lf, Tf, and their N-lobe half-molecules Lf(N) and Tf(N) and showed that half of the difference in iron retention at low pH ( approximately 1.3 pH units) results from interlobe interactions in Lf. To probe factors intrinsic to the N-lobes, we further examined the specific role of two basic residues that are proposed to form a pH-sensitive dilysine trigger for iron release in the N-lobe of Tf [Dewan, J. C., Mikami, B., Hirose, M., and Sacchettini, J. C. (1993) Biochemistry 32, 11963-11968] by mutating Arg 210 to Lys in the N-lobe half-molecule Lf(N). The R210K mutant was expressed, purified, and crystallized, and its crystal structure was determined and refined at 2.0-A resolution to a final R factor (R(free)) of 19.8% (25.0%). The structure showed that Lys 210 and Lys 301 in R210K do not form a dilysine interaction like that between Lys 206 and Lys 296 in human Tf. The R210K mutant retained iron to lower pH than Tf(N), consistent with the absence of the dilysine interaction but released iron at approximately 0.7 pH units higher than Lf(N). We conclude that (i) the ability of Lf to retain iron to significantly lower pH than Tf is due equally to interlobe interactions and to the absence in Lfs of an interaction analogous to the dilysine pair in Tfs, even when two lysines are present at the corresponding sequence positions, and (ii) an appropriately positioned basic residue (Arg 210 in human Lf) modulates iron release by inhibiting protonation of the N-lobe iron ligands, specifically His 253.     

"Dilysine trigger" in transferrins probed by mutagenesis of lactoferrin: crystal structures of the R210G,R210E,and R210L mutants of human lactoferrin

The mammalian iron-binding proteins lactoferrin (Lf) and transferrin (Tf) bind iron very tightly, but reversibly. Despite homologous structures and essentially identical iron binding sites, Tf begins to release iron at pH 6.0, whereas Lf retains iron to pH approximately 3.5. This difference in iron retention gives the two proteins different biological roles. Two lysine residues, Lys 206 and Lys 296, which form a hydrogen-bonded dilysine pair in human Tf, have been shown to strongly influence iron release from the N-lobe. The equivalent residues in human Lf are Arg 210 and Lys 301, and we have here mutated Arg 210 in the N-lobe half-molecule of human lactoferrin, Lf(N), to probe its role in iron release. The Lf(N) mutants R210G, R210E, and R210L were expressed, purified, and crystallized, and their crystal structures were determined and refined at resolutions of 1.95 A (R210G), 2.2 A (R210E), and 2.0 A (R210L). The overall structures are very similar to that of wild-type Lf(N), but with small differences in domain orientations. In each of the mutants, however, Lys 301 (equivalent to Lys 296 in Tf) changes its conformation to fill the space occupied by Arg 210 Neta2 in wild-type Lf(N), interacting with the two tyrosine ligands Tyr 92 and Tyr 192. By comparison with other Lf and Tf structures, we conclude that Lys 301 (or Lys 296 in Tf) only occupies this site when residue 210 (206 in Tf) is nonpositive (neutral as in R210G and R210L or negative as in R210E). Thus, Lys 206 in the Tf dilysine pair is identified as having a depressed pK(a). Three specific sites are variably occupied by polar groups in the Lf mutants and other Lf and Tf proteins, and when coupled with iron-release data, these give new insights into the factors that most influence iron retention at low pH.     

Ligand variation in the transferrin family: the crystal structure of the H249Q mutant of the human transferrin N-lobe as a model for iron binding in insect transferrins

Proteins of the transferrin (Tf) family play a central role in iron homeostasis in vertebrates. In vertebrate Tfs, the four iron-binding ligands, 1 Asp, 2 Tyr, and 1 His, are invariant in both lobes of these bilobal proteins. In contrast, there are striking variations in the Tfs that have been characterized from insect species; in three of them, sequence changes in the C-lobe binding site render it nonfunctional, and in all of them the His ligand in the N-lobe site is changed to Gln. Surprisingly, mutagenesis of the histidine ligand, His249, to glutamine in the N-lobe half-molecule of human Tf (hTf/2N) shows that iron binding is destabilized and suggests that Gln249 does not bind to iron. We have determined the crystal structure of the H249Q mutant of hTf/2N and refined it at 1.85 A resolution (R = 0.221, R(free) = 0.246). The structure reveals that Gln249 does coordinate to iron, albeit with a lengthened Fe-Oepsilon1 bond of 2.34 A. In every other respect, the protein structure is unchanged from wild-type. Examination of insect Tf sequences shows that the K206.K296 dilysine pair, which aids iron release from the N-lobes of vertebrate Tfs, is not present in the insect proteins. We conclude that substitution of Gln for His does destabilize iron binding, but in the insect Tfs this is compensated by the loss of the dilysine interaction. The combination of a His ligand with the dilysine pair in vertebrate Tfs may have been a later evolutionary development that gives more sophisticated pH-mediated control of iron release from the N-lobe of transferrins.     

Dual role of Lys206-Lys296 interaction in human transferrin N-lobe: iron-release trigger and anion-binding site.

The unique structural feature of the dilysine (Lys206-Lys296) pair in the transferrin N-lobe (hTF/2N) has been postulated to serve a special function in the release of iron from the protein. These two lysines, which are located in opposite domains, hydrogen bond to each other in the iron-containing hTF/2N at neutral pH but are far apart in the apo-form of the protein. It has been proposed that charge repulsion resulting from the protonation of the dilysines at lower pH may be the trigger to open the cleft and facilitate iron release. The fact that the dilysine pair is positively charged and resides in a location close to the metal-binding center has also led to the suggestion that the dilysine pair is an anion-binding site for chelators. The present report provides comprehensive evidence to confirm that the dilysine pair plays this dual role in modulating release of iron. When either of the lysines is mutated to glutamate or glutamine or when both are mutated to glutamate, release of iron is much slower compared to the wild-type protein. This is due to the fact that the driving force for cleft opening is absent in the mutants or is converted to a lock-like interaction (in the case of the K206E and K296E mutants). Direct titration of the apo-proteins with anions as well as anion-dependent iron release studies show that the dilysine pair is part of an active anion-binding site which exists with the Lys296-Tyr188 interaction as a core. At this site, Lys296 serves as the primary anion-binding residue and Tyr188 is the main reporter for electronic spectral change, with smaller contributions from Lys206, Tyr85, and Tyr95. In iron-loaded hTF/2N, anion binding becomes invisible as monitored by UV-vis difference spectra since the spectral reporters Tyr188 and Tyr95 are bound to iron. Our data strongly support the hypothesis that the apo-hTF/2N exists in equilibrium between the open and closed conformations, because only in the closed form is Lys296 in direct contact with Tyr188. The current findings bring together observations, ideas, and experimental data from a large number of previous studies and shed further light on the detailed mechanism of iron release from the transferrin N-lobe. In iron-containing hTF/2N, Lys296 may still function as a target to introduce an anion (or a chelator) near to the iron-binding center. When the pH is lowered, the protonation of carbonate (synergistic anion for metal binding) and then the dilysine pair form the driving force to loosen the cleft, exposing iron; the nearby anion (or chelator) then binds to the iron and releases it from the protein.     

Thermodynamic studies on anion binding to apotransferrin and to recombinant transferrin N-lobe half molecules

Equilibrium constants for the binding of anions to apotransferrin, to the recombinant N-lobe half transferrin molecule (Tf/2N), and to a series of mutants of Tf/2N have been determined by difference UV titrations of samples in 0.1 M Hepes buffer at pH 7.4 and 25 degrees C. The anions included in this study are phosphate, sulfate, bicarbonate, pyrophosphate, methylenediphosphonic acid, and ethylenediphosphonic acid. There are no significant differences between anion binding to Tf/2N and anion binding to the N-lobe of apotransferrin. The binding of simple anions like phosphate appears to be essentially equivalent for the two apotransferrin binding sites. The binding of pyrophosphate and the diphosphonates is inequivalent, and the studies on the recombinant Tf/2N show that the stronger binding is associated with the N-terminal site. Anion binding constants for phosphate, pyrophosphate, and the diphosphonates with the N-lobe mutants K206A, K296A, and R124A have been determined. Anion binding tends to be weakest for the K296A mutant, but the variation in log K values among the three mutants is surprisingly small. It appears that the side chains of K206, K296, and R124 all make comparable contributions to anion binding. There are significant variations in the intensities of the peaks in the difference UV spectra that are generated by the titrations of the mutant apoproteins with these anions. These differences appear to be related more to variations in the molar extinction coefficients of the anion-protein complexes rather than to differences in binding constants.     

Mutation of the iron ligand His 249 to Glu in the N-lobe of human transferrin abolishes the dilysine "trigger" but does not significantly affect iron release

Serum transferrin is the major iron transport protein in humans. Its function depends on its ability to bind iron with very high affinity, yet to release this bound iron at the lower intracellular pH. Possible explanations for the release of iron from transferrin at low pH include protonation of a histidine ligand and the existence of a pH-sensitive "trigger" involving a hydrogen-bonded pair of lysines in the N-lobe of transferrin. We have determined the crystal structure of the His249Glu mutant of the N-lobe half-molecule of human transferrin and compared its iron-binding properties with those of the wild-type protein and other mutants. The crystal structure, determined at 2.4 A resolution (R-factor 19.8%, R(free) 29.4%), shows that Glu 249 is directly bound to iron, in place of the His ligand, and that a local movement of Lys 296 has broken the dilysine interaction. Despite the loss of this potentially pH-sensitive interaction, the H249E mutant is only slightly more acid-stable than wild-type and releases iron slightly faster. We conclude that the loss of the dilysine interaction does make the protein more acid stable but that this is counterbalanced by the replacement of a neutral ligand (His) by a negatively charged one (Glu), thus disrupting the electroneutrality of the binding site.     

Crystal structures of two mutants (K206Q, H207E) of the N-lobe of human transferrin with increased affinity for iron

The X-ray crystallographic structures of two mutants (K206Q and H207E) of the N-lobe of human transferrin (hTF/2N) have been determined to high resolution (1.8 and 2.0 A, respectively). Both mutant proteins bind iron with greater affinity than native hTF/2N. The structures of the K206Q and H207E mutants show interactions (both H-bonding and electrostatic) that stabilize the interaction of Lys296 in the closed conformation, thereby stabilizing the iron bound forms.     

Structural and functional studies on the stalk of the transferrin receptor

Transferrin (Tf) is an iron carrier protein that consists of two lobes, the N- and C-lobes, which can each bind a Fe³⁺ ion. Tf binds to its receptor (TfR), which mediates iron delivery to cells through an endocytotic pathway. Receptor binding facilitates iron release from the Tf C-lobe, but impedes iron release from the N-lobe. An atomic model of the Tf-TfR complex based on single particle electron microscopy (EM) indicated that receptor binding is indeed likely to hinder opening of the N-lobe, thus interfering with its iron release. The atomic model also suggested that the TfR stalks could form additional contacts with the Tf N-lobes, thus potentially further slowing down its iron release. Here, we show that the TfR stalks are unlikely to make strong interactions with the Tf N-lobes and that the stalks have no effect on iron release from the N-lobes of receptor-bound Tf.     

Molecular dynamics simulations of iron- and aluminum-loaded serum transferrin: protonation of tyr188 is necessary to prompt metal release

Serum transferrin (sTf) carries iron in blood serum and delivers it into cells by receptor-mediated endocytosis. The protein can also bind other metals, including aluminum. The crystal structures of the metal-free and metal-loaded protein indicate that the metal release process involves an opening of the protein. In this process, Lys206 and Lys296 lying in the proximity of each other form the dilysine pair or, so-called, dilysine trigger. It was suggested that the conformational change takes place due to variations of the protonation state of the dilysine trigger at the acidic endosomal pH. In 2003, Rinaldo and Field (Biophys. J. 85, 3485-3501) proposed that the dilysine trigger alone can not explain the opening and that the protonation of Tyr188 is required to prompt the conformational change. However, no evidence was supplied to support this hypothesis. Here, we present several 60 ns molecular dynamics simulations considering various protonation states to investigate the complexes formed by sTf with Fe(III) and Al(III). The calculations demonstrate that only in those systems where Tyr188 has been protonated does the protein undergo the conformational change and that the dilysine trigger alone does not lead to the opening. The simulations also indicate that the metal release process is a stepwise mechanism, where the hinge-bending motion is followed by the hinge-twisting step. Therefore, the study demonstrates for the first time that the protonation of Tyr188 is required for the release of metal from the metal loaded sTf and provides valuable information about the whole process.     

Camel lactoferrin, a transferrin-cum-lactoferrin: crystal structure of camel apolactoferrin at 2.6 A resolution and structural basis of its dual role

Camel lactoferrin is the first protein from the transferrin superfamily that has been found to display the characteristic functions of iron binding and release of lactoferrin as well as transferrin simultaneously. It was remarkable to observe a wide pH demarcation in the release of iron from two lobes. It loses 50 % iron at pH 6.5 and the remaining 50 % iron is released only at pH values between 4.0 and 2.0. Furthermore, proteolytically generated N and C-lobes of camel lactoferrin showed that the C-lobe lost iron at pH 6.5, while the N-lobe lost it only at pH less than 4.0. In order to establish the structural basis of this striking observation, the purified camel apolactoferrin was crystallized. The crystals belong to monoclinic space group C2 with unit cell dimensions a=175.8 A, b=80.9 A, c=56.4 A, beta=92.4 degrees and Z=4. The structure has been determined by the molecular replacement method and refined to an R-factor of 0.198 (R-free=0.268) using all the data in the resolution range of 20.0-2.6 A. The overall structure of camel apolactoferrin folds into two lobes which contain four distinct domains. Both lobes adopt open conformations indicating wide distances between the iron binding residues in the native iron-free form of lactoferrin. The dispositions of various residues of the iron binding pocket of the N-lobe of camel apolactoferrin are similar to those of the N-lobe in human apolactoferrin, while the corresponding residues in the C-lobe show a striking similarity with those in the C-lobes of duck and hen apo-ovotransferrins. These observations indicate that the N-lobe of camel apolactoferrin is structurally very similar to the N-lobe of human apolactoferrin and the structure of the C-lobe of camel apolactoferrin matches closely with those of the hen and duck apo-ovotransferrins. These observations suggest that the iron binding and releasing behaviour of the N-lobe of camel lactoferrin is similar to that of the N-lobe of human lactoferrin, whereas that of the C-lobe resembles those of the C-lobes of duck and hen apo-ovotransferrins. Hence, it correlates with the observation of the N-lobe of camel lactoferrin losing iron at a low pH (4.0-2.0) as in other lactoferrins. On the other hand, the C-lobe of camel lactoferrin loses iron at higher pH (7.0-6.0) like transferrins suggesting its functional similarity to that of transferrins. Thus, camel lactoferrin can be termed as half lactoferrin and half transferrin.     

Mechanism for multiple ligand recognition by the human transferrin receptor

Transferrin receptor 1 (TfR) plays a critical role in cellular iron import for most higher organisms. Cell surface TfR binds to circulating iron-loaded transferrin (Fe-Tf) and transports it to acidic endosomes, where low pH promotes iron to dissociate from transferrin (Tf) in a TfR-assisted process. The iron-free form of Tf (apo-Tf) remains bound to TfR and is recycled to the cell surface, where the complex dissociates upon exposure to the slightly basic pH of the blood. Fe-Tf competes for binding to TfR with HFE, the protein mutated in the iron-overload disease hereditary hemochromatosis. We used a quantitative surface plasmon resonance assay to determine the binding affinities of an extensive set of site-directed TfR mutants to HFE and Fe-Tf at pH 7.4 and to apo-Tf at pH 6.3. These results confirm the previous finding that Fe-Tf and HFE compete for the receptor by binding to an overlapping site on the TfR helical domain. Spatially distant mutations in the TfR protease-like domain affect binding of Fe-Tf, but not iron-loaded Tf C-lobe, apo-Tf, or HFE, and mutations at the edge of the TfR helical domain affect binding of apo-Tf, but not Fe-Tf or HFE. The binding data presented here reveal the binding footprints on TfR for Fe-Tf and apo-Tf. These data support a model in which the Tf C-lobe contacts the TfR helical domain and the Tf N-lobe contacts the base of the TfR protease-like domain. The differential effects of some TfR mutations on binding to Fe-Tf and apo-Tf suggest differences in the contact points between TfR and the two forms of Tf that could be caused by pH-dependent conformational changes in Tf, TfR, or both. From these data, we propose a structure-based model for the mechanism of TfR-assisted iron release from Fe-Tf.     

The position of arginine 124 controls the rate of iron release from the N-lobe of human serum transferrin. A structural study

Human serum transferrin (hTF) is a bilobal iron-binding and transport protein that carries iron in the blood stream for delivery to cells by a pH-dependent mechanism. Two iron atoms are held tightly in two deep clefts by coordination to four amino acid residues in each cleft (two tyrosines, a histidine, and an aspartic acid) and two oxygen atoms from the "synergistic" carbonate anion. Other residues in the binding pocket, not directly coordinated to iron, also play critical roles in iron uptake and release through hydrogen bonding to the liganding residues. The original crystal structures of the iron-loaded N-lobe of hTF (pH 5.75 and 6.2) revealed that the synergistic carbonate is stabilized by interaction with Arg-124 and that both the arginine and the carbonate adopt two conformations (MacGillivray, R. T. A., Moore, S. A., Chen, J., Anderson, B. F., Baker, H., Luo, Y. G., Bewley, M., Smith, C. A., Murphy, M. E., Wang, Y., Mason, A. B., Woodworth, R. C., Brayer, G. D., and Baker, E. N. (1998) Biochemistry 37, 7919-7928). In the present study, we show that the two conformations are also found for a structure at pH 7.7, indicating that this finding was not strictly a function of pH. We also provide structures for two single point mutants (Y45E and L66W) designed to force Arg-124 to adopt each of the previously observed conformations. The structures of each mutant show that this goal was accomplished, and functional studies confirm the hypothesis that access to the synergistic anion dictates the rate of iron release. These studies highlight the importance of the arginine/carbonate movement in the mechanism of iron release in the N-lobe of hTF. Access to the carbonate via a water channel allows entry of protons and anions, enabling the attack on the iron.     

Structural and functional consequences of binding site mutations in transferrin: crystal structures of the Asp63Glu and Arg124Ala mutants of the N-lobe of human transferrin

Human transferrin is a serum protein whose function is to bind Fe(3+) with very high affinity and transport it to cells, for delivery by receptor-mediated endocytosis. Structurally, the transferrin molecule is folded into two globular lobes, representing its N-terminal and C-terminal halves, with each lobe possessing a high-affinity iron binding site, in a cleft between two domains. Central to function is a highly conserved set of iron ligands, including an aspartate residue (Asp63 in the N-lobe) that also hydrogen bonds between the two domains and an arginine residue (Arg124 in the N-lobe) that binds an iron-bound carbonate ion. To further probe the roles of these residues, we have determined the crystal structures of the D63E and R124A mutants of the N-terminal half-molecule of human transferrin. The structure of the D63E mutant, determined at 1.9 A resolution (R = 0.245, R(free) = 0.261), showed that the carboxyl group still binds to iron despite the larger size of the Glu side chain, with some slight rearrangement of the first turn of alpha-helix residues 63-72, to which it is attached. The structure of the R124A mutant, determined at 2.4 A resolution (R = 0.219, R(free) = 0.288), shows that the loss of the arginine side chain results in a 0.3 A displacement of the carbonate ion, and an accompanying movement of the iron atom. In both mutants, the iron coordination is changed slightly, the principal change being in each case a lengthening of the Fe-N(His249) bond. Both mutants also release iron more readily than the wild type, kinetically and in terms of acid lability of iron binding. We attribute this to more facile protonation of the synergistically bound carbonate ion, in the case of R124A, and to strain resulting from the accommodation of the larger Glu side chain, in the case of D63E. In both cases, the weakened Fe-N(His) bond may also contribute, consistent with protonation of the His ligand being an early intermediate step in iron release, following the protonation of the carbonate ion.     

Mutations at the histidine 249 ligand profoundly alter the spectral and iron-binding properties of human serum transferrin N-lobe

Human serum transferrin is an iron-binding and -transport protein which carries iron from the blood stream into various cells. Iron is held in two deep clefts located in the N- and C-lobes by coordinating to four amino acid ligands, Asp 63, Tyr 95, Tyr 188, and His 249 (N-lobe numbering), and to two oxygens from carbonate. We have previously reported the effect on the iron-binding properties of the N-lobe following mutation of the ligands Asp 63, Tyr 95, and Tyr 188. Here we report the profound functional changes which result from mutating His 249 to Ala, Glu, or Gln. The results are consistent with studies done in lactoferrin which showed that the histidine ligand is critical for the stability of the iron-binding site [H. Nicholson, B. F. Anderson, T. Bland, S. C. Shewry, J. W. Tweedie, and E. N. Baker (1997) Biochemistry 36, 341-346]. In the mutant H249A, the histidine ligand is disabled, resulting in a dramatic reduction in the kinetic stability of the protein toward loss of iron. The H249E mutant releases iron three times faster than wild-type protein but shows significant changes in both EPR spectra and the binding of anion. This appears to be the net effect of the metal ligand substitution from a neutral histidine residue to a negative glutamate residue and the disruption of the "dilysine trigger" [MacGillivray, R. T. A., Bewley, M. C., Smith, C. A., He, Q.-Y., Mason, A. B., Woodworth, R. C., and Baker, E. N. (2000) Biochemistry 39, 1211-1216]. In the H249Q mutant, Gln 249 appears not to directly contact the iron, given the similarity in the spectroscopic properties and the lability of iron release of this mutant to the H249A mutant. Further evidence for this idea is provided by the preference of both the H249A and H249Q mutants for nitrilotriacetate rather than carbonate in binding iron, probably because NTA is able to provide a third ligation partner. An intermediate species has been identified during the kinetic interconversion between the NTA and carbonate complexes of the H249A mutant. Thus, mutation of the His 249 residue does not abolish iron binding to the transferrin N-lobe but leads to the appearance of novel iron-binding sites of varying structure and stability.     

Binding patterns of vanadium ions with different valence states to human serum transferrin studied by HPLC/high-resolution ICP-MS

Vanadium (V) is an essential metal for mammals and has different valence states. In blood, V is bound to serum transferrin (Tf), a glycoprotein which has two metal-binding sites, and carbonate is generally required for the binding. In this study, the binding patterns of V(III), V(IV), and V(V) to human serum Tf (hTf) were analyzed using an HPLC system equipped with an anion-exchange column and directly connected to a high-resolution inductively coupled plasma-mass spectrometer for metal detection (51V). In affinity to hTf, the three ions were ranked V(III)>V(IV)>V(V) in the presence of bicarbonate and V(III) reverse congruent V(IV)>V(V) in the absence. Intermediates in the "open forms" binding to the respective sites were detected at the initial stage. V(IV) and V(V) were bound to the N-lobe site in the "closed form" and "open form," respectively. In the absence of bicarbonate, V ions with respective valence states were bound to hTf in the "open form." In terms of binding to hTf, tri-valent V was most favorable in the presence of bicarbonate.     

Investigation of the mechanism of iron release from the C-lobe of human serum transferrin: mutational analysis of the role of a pH sensitive triad

The transferrins (TFs) are a family of proteins that are widely distributed in vertebrates, where they serve a major role in iron binding and transport. Most TFs are composed of two homologous lobes, the N- and C-lobes, each able to bind a single iron atom. Human serum transferrin (hTF) binds iron in the blood and delivers it to actively dividing cells; through the process of receptor-mediated endocytosis, diferric hTF in the serum (pH approximately 7.4) binds to specific TF receptors on the cell surface and is internalized, whereupon a pH drop in the endosome (pH approximately 5.6) facilitates iron release. Many factors affect the rate of iron release, including pH, chelator, temperature, salt, and lobe-lobe interactions. We, and others, have actively studied the mechanism of iron release from the recombinant N-lobe of hTF; in contrast, the exact details of iron release from the C-lobe have remained less well characterized but appear to differ from those found for the N-lobe. Recently, to simplify the purification protocol, we have expressed and purified full-length recombinant hTF containing an N-terminal hexahistidine tag [Mason et al. (2002) Biochemistry 41, 9448-9454]. In the present work, we have expressed a full-length recombinant hTF containing a K206E mutation such that the N-lobe does not readily release iron. The resulting full-length hTF allows us to focus on the C-lobe and to study the effects of mutations introduced into the C-lobe. The success of this strategy is documented and in vitro mutagenesis is used to identify three residues in the C-lobe that are critical for iron-release. Although the importance of this triad is unequivocally demonstrated, further studies are needed to completely elucidate the mechanism of iron release from the C-lobe of hTF. In addition, the striking difference in the effect of increasing salt concentrations on iron release from the two lobes of hTF is further documented in the present work.     

A simple method for obtaining transferrins from human plasma and porcine serum: preparations and properties

A simple method was described for the purification of serum transferrin (Tf) from human plasma and porcine serum with relative high yield and purity. The properties including purity, integrity, immunoreactivity and the receptor-binding ability of the proteins were studied by several assays, comprising spectrometry, SDS-PAGE, HPLC, Western blotting, urea electrophoresis, mass spectrometry and cytometry. Analysis from all the different aspects manifested that the proteins were of high purity. The two kinds of Tfs appeared to be iron-saturated as confirmed by their absorbance spectra and urea-PAGE mobility. The specific spectra of absorption of the two Tfs were both at around 465 nm. The relative molecular weights of human Tf (hTf) and porcine Tf (pTf) were determined by SDS-PAGE and further identified by MAIDI-TOF mass spectrometry with a result of 79,707 and 79,258, respectively. Immunoblotting assay showed that pTf could react with the anti-human Tf monoclonal antibody with a less level compared to hTf. FACS assays of their binding activities to Tf receptor-positive cell (K562 cell line) indicated that pTf could be recognized by the hTf receptor and internalized into cells, with a slightly less efficacy than hTf. All special property studies demonstrated that pTf was similar to hTf in physical and chemical characteristics, which gave a hint that pTf could substitute for hTf in some kinds of researches, such as using hTf as a carrier in drug targeting system.     

A computational study of the open and closed forms of the N-lobe human serum transferrin apoprotein

Human serum transferrin tightly binds ferric ions in the blood stream but is able to release them in cells by a process involving receptor-mediated endocytosis and decrease in pH. Iron binding and release are accompanied by a large conformation change. In this study, we investigate theoretically the open and closed forms of the N-lobe human serum transferrin apoprotein by performing pKa calculations and molecular dynamics and free-energy simulations. In agreement with the hypothesis based on the x-ray crystal structures, our calculations show that there is a shift in the pKa values of the lysines forming the dilysine trigger when the conformation changes. We argue, however, that simple electrostatic repulsion between the lysines is not sufficient to trigger domain opening and, instead, propose an alternative explanation for the dilysine-trigger effect. Analysis of the molecular dynamics and free-energy results indicate that the open form is more mobile than the closed form and is much more stable at pH 5.3, in large part due to entropic effects. Despite a lower free energy, the dynamics simulation of the open form shows that it is flexible enough to sample conformations that are consistent with iron binding.     

Mutational analysis of C-lobe ligands of human serum transferrin: insights into the mechanism of iron release

Each homologous lobe of human serum transferrin (hTF) has one Fe(3+) ion bound by an aspartic acid, a histidine, two tyrosine residues, and two oxygens from the synergistic anion, carbonate. Extensive characterization of these ligands in the N-terminal lobe has been carried out. Despite sharing the same set of ligands, there is a substantial amount of evidence that the N- and C-lobes are inequivalent. Studies of full-length hTF have shown that iron release from each lobe is kinetically distinguishable. To simplify the assessment of mutations in the C-lobe, we have created mutant hTF molecules in which the N-lobe binds iron with high affinity or not at all. Mutations targeting the C-lobe liganding residues have been introduced into these hTF constructs. UV-visible spectral, kinetic, and EPR studies have been undertaken to assess the effects of each mutation and to allow direct comparison to the N-lobe. As found for the N-lobe, the presence of Y517 in the C-lobe (equivalent to Y188 in the N-lobe) is absolutely essential for the binding of iron. Unlike the N-lobe, however, mutation of Y426 (equivalent to Y95) does not produce a stable complex with iron. For the mutants that retain the ability to bind iron (D392S and H585A), the rates of release are considerably slower than those measured for equivalent mutations in the N-lobe at both pH 7.4 and pH 5.6. Equilibrium binding experiments with HeLa S(3) cells indicate that recombinant hTF, in which Y426 or H585 is mutated, favor a closed or nearly closed conformation while those with mutations of the D392 or Y517 ligands appear to promote an open conformation. The differences in the effects of mutating the liganding residues in the two lobes and the subtle indications of cooperativity between lobes point to the importance of the transferrin receptor in effecting iron release from the C-lobe. Significantly, the equilibrium binding experiments also indicate that, regardless of which lobe contains the iron, the free energy of binding is equivalent and not additive; each monoferric hTF has a free energy of binding that is 82% of diferric hTF.     

The molecular mechanism for receptor-stimulated iron release from the plasma iron transport protein transferrin

Human transferrin receptor 1 (TfR) binds iron-loaded transferrin (Fe-Tf) and transports it to acidic endosomes where iron is released in a TfR-facilitated process. Consistent with our hypothesis that TfR binding stimulates iron release from Fe-Tf at acidic pH by stabilizing the apo-Tf conformation, a TfR mutant (W641A/F760A-TfR) that binds Fe-Tf, but not apo-Tf, cannot stimulate iron release from Fe-Tf, and less iron is released from Fe-Tf inside cells expressing W641A/F760A-TfR than cells expressing wild-type TfR (wtTfR). Electron paramagnetic resonance spectroscopy shows that binding at acidic pH to wtTfR, but not W641A/F760A-TfR, changes the Tf iron binding site > or =30 A from the TfR W641/F760 patch. Mutation of Tf histidine residues predicted to interact with the W641/F760 patch eliminates TfR-dependent acceleration of iron release. Identification of TfR and Tf residues critical for TfR-facilitated iron release, yet distant from a Tf iron binding site, demonstrates that TfR transmits long-range conformational changes and stabilizes the conformation of apo-Tf to accelerate iron release from Fe-Tf.