Detection of triple-helix related structures adopted by poly(dG)-poly(dC) sequences in supercoiled plasmid DNA.

Negative superhelical strain induces the poly(dG)-poly(dC) sequence to adopt two totally different types of triple-helices, either a dG.dG.dC triplex in the presence of Mg(+)+ at both neutral and acidic pHs or a protonated dC+.dG.dC triplex in the absence of Mg(+)+ ions at acidic pH (1). To examine whether there are still other types of non-B DNA structures formed by the same sequence, we constructed supercoiled plasmid DNAs harboring varying lengths of the poly(dG) tract, and the structures adopted by each supercoiled plasmid DNA were studied with a chemical probe, chloroacetaldehyde. The potential of a poly(dG)-poly(dC) sequence to adopt non-B DNA structures depends critically on the length of the tract. Furthermore, in the presence of Mg(+)+ and at a mildly acidic pH, in addition to the expected dG.dG.dC triplex detected for the poly(dG) tracts of 14 to 30 base pairs (bp), new structures were also detected for the tracts longer than 35 bp. The structure formed by a poly(dG) tract of 45 bp revealed chemical reaction patterns consistent with a dG.dG.dC triplex and protonated dC+.dG.dC triple-helices fused together. This structure lacks single-stranded stretches typical of intramolecular triplexes.     

Protonated polynucleotides structures - 22.CD study of the acid-base titration of poly(dG).poly(dC)

The acid-base titration (pH 8 --> pH 2.5 --> pH 8) of eleven mixing curve samples of the poly(dG) plus poly(dC) system has been performed in 0.15 M NaCl. Upon protonation, poly(dG).poly(dC) gives rise to an acid complex, in various amounts according to the origin of the sample. We have established that the hysteresis of the acid-base titration is due to the non-reversible formation of an acid complex, and the liberation of the homopolymers at the end of the acid titration and during the base titration: the homopolymer mixtures remain stable up to pH 7. A 1G:1C stoichiometry appears to be the most probable for the acid complex, a 1G:2C stoichiometry, as found in poly(C(+)).poly(I).poly(C) or poly(C(+)).poly(G).poly(C), cannot be rejected. In the course of this study, evidence has been found that the structural consequences of protonation could be similar for both double stranded poly(dG).poly(dC) and G-C rich DNA's: 1) protonation starts near pH 6, dissociation of the acid complex of poly(dG).poly(dC) and of protonated DNA take place at pH 3; 2) the CD spectrum computed for the acid polymer complex displays a positive peak at 255 nm as found in the acid spectra of DNA's; 3) double stranded poly(dG).poly(dC) embedded in triple-stranded poly(dG).poly(dG).poly(dC) should be in the A-form and appears to be prevented from the proton induced conformational change. The neutral triple stranded poly(dG).poly(dG).poly(dC) appears therefore responsible, although indirectly, for the complexity and variability of the acid titration of poly(dG).poly(dC) samples.     

The isolation of duplex DNA fragments containing (dG.dC) clusters by chromatography on poly(rC)-Sephadex.

Duplex DNA containing oligo(dG.dC)-rich clusters can be isolated by specific binding to poly(rC)-Sephadex. This binding, probably mediated by the formation of an oligo(dG.dC)rC+ triple helix, is optimal at pH 5 in 50% formamide, 2 M LiCl; the bound DNA is recovered by elution at pH 7.5. Using this method we find that the viral DNAs PM2, lambda and SV40 contain at least 1, 1 and 2 sites for binding to poly(rC)-Sephadex, respectively. These binding sites have been mapped in the case of SV40; the binding sites can in turn be used for physical mapping studies of DNAs containing (dG.dC) clusters. Inspection of the sequence of the bound fragments of SV40 DNA shows that a (dG.dC)6-7 tract is required for the binding of duplex DNA to poly(rC)-Sephadex. Although about 60% of rabbit DNA cleaved with restriction endonuclease KpnI binds to poly(rC)-Sephadex, no binding is observed for the 5.1 kb DNA fragment generated by KpnI digestion, which contains the rabbit beta-globin gene. This indicates that oligo(dG.dC) clusters are not found close to the rabbit beta-globin gene.     

Poly(dG)-poly(dC) DNA appears shorter than poly(dA)-poly(dT) and possibly adopts an A-related conformation on a mica surface under ambient conditions

Three types of DNA: approximately 2700 bp polydeoxyguanylic olydeoxycytidylic acid [poly(dG)-poly(dC)], approximately 2700 bp polydeoxyadenylic polydeoxythymidylic acid [poly(dA)-poly(dT)] and 2686 bp linear plasmid pUC19 were deposited on a mica surface and imaged by atomic force microscopy. Contour length measurements show that the average length of poly(dG)-poly(dC) is approximately 30% shorter than that of poly(dA)-poly(dT) and the plasmid. This led us to suggest that individual poly(dG)-poly(dC) molecules are immobilized on mica under ambient conditions in a form which is likely related to the A-form of DNA in contrast to poly(dA)-poly(dT) and random sequence DNA which are immobilized in a form that is related to the DNA B-form.     

Preparation and properties of poly 2''-O-ethylcytidylic acid.

Poly 2'0-ethylcytidylic acid (poly (Ce)) was prepared by polymerization of 2'-0-ethylcytidine-5'-pyrophosphate with Escherichia coli polynucleotide phosphorylase in the presence of Mn++, and its properties compared with those of poly (rC), poly (Cm) and poly (dC). The neutral form of pOLY (Ce) exhibits properties similar to those of poly (rC) and poly (Cm). It also forms an acid twin-stranded helix with a transition pH of 5.9 in 0.1 M NaCl. The neutral form readily forms a double-stranded helical complex with poly (rI). Relative to poly (Cm), replacement of the 2'-0-methyl by 2-0-ethyl leads to increased enhancement of the thermal stabilities of both the acid helical form of poly (Ce) and its complex with poly (rI).     

Comparison of base inclination in ribo-GC and deoxybribo-GC polymers,and synthesis of poly(rGrC)-poly(rGrC)

The inclination angle between the base normal and the helix axis, and the axes around which the bases incline, are measured for ribo-GC polymers in buffer by using flow linear dichroism (LD), and compared to measurements for deoxyribo-GC polymers in buffer and under dehydrating conditions. A new method is designed to synthesize poly(rGrC) -poly(rGrC), which is not available commercially, in large quantities. The LD of this RNA reveals inclination angles that are similar to the B-form DNA in buffer, although the axes are different. The CD of poly(dGdC)-poly(dGdC) under the dehydrating conditions is similar to poly(rGrC)-poly(rGrC), indicating it is in the A form, and the LD gives larger inclination angles than either the B form or the corresponding RNA. Poly(dG)-poly(dC) is in the A form in buffer. Comparison among poly(rG)-poly(rC) in buffer, and poly (dG)-poly(dC) in buffer and under dehydrating conditions, reveals similar inclination angles and axes, although the LD shows that the DNA has the largest inclination angles. Except for poly(rGrC)-poly(rGrC), which has a unique reduced dichroism, all the axes for G are similar, as are the axes for C. © 1995 John Wiley & Sons, Inc.     

Minor groove binding of Co(III)meso-tetrakis(N-methylpyridinium-4-yl)porphyrin to various duplex and triplex polynucleotides

The binding site and the geometry of Co(III)meso-tetrakis(N-methylpyridinium-4-yl)porphyrin (CoTMPyP) complexed with double helical poly(dA).poly(dT) and poly(dG).poly(dC), and with triple helical poly(dA).[poly(dT)](2) and poly(dC).poly(dG).poly(dC)(+) were investigated by circular and linear dichroism (CD and LD). The appearance of monomeric positive CD at a low [porphyrin]/[DNA] ratio and bisignate CD at a high ratio of the CoTMPyP-poly(dA).poly(dT) complex is almost identical with its triplex counterpart. Similarity in the CD spectra was also observed for the CoTMPyP-poly(dG).poly(dC) and -poly(dC).poly(dG).poly(dC)(+) complex. This observation indicates that both monomeric binding and stacking of CoTMPyP to these polynucleotides occur at the minor groove. However, different binding geometry of CoTMPyP, when bind to AT- and GC-rich polynucleotide, was observed by LD spectrum. The difference in the binding geometry may be attributed to the difference in the interaction between polynucleotides and CoTMPyP: in the GC polynucleotide case, amine group protrude into the minor groove while it is not present in the AT polynucleotide.     

Poly(dG)-poly(dC) sequences, under torsional stress, induce an altered DNA conformation upon neighboring DNA sequences

Supercoiled plasmid DNAs (at bacterial superhelical density) harboring the homopurine-homopyrimidine sequence, poly(dG)-poly(dC), were reacted with bromoacetaldehyde (BAA), a reagent that reacts with unpaired DNA bases. Not only did the poly(dG)-poly(dC) sequence react with BAA but, surprisingly, neighboring sequences located 3' to the contiguous G sequences also reacted. The altered conformation in the poly(dG)-poly(dC) sequence and in the neighboring sequence occurred in the same supercoiled plasmid DNA molecule. Furthermore, the occurrence of an "unpaired" conformation in the neighboring sequence is strictly due to a positional effect, since it is observed when the poly(dG)-poly(dC) segment is adjacent to a variety of neighboring sequences.     

Triple helical polynucleotidic structures: an FTIR study of the C+ .G. Ctriplet.

Triple helixes containing one homopurine poly dG or poly rG strand and two homopyrimidine poly dC or poly rC strands have been prepared and studied by FTIR spectroscopy in H2O and D2O solutions. The spectra are discussed by comparison with those of the corresponding third strands (auto associated or not) and of double stranded poly dG.poly dC and poly rG.poly rC in the same concentration range and salt conditions. The triplex formation is characterized by the study of the base-base interactions reflected by changes in the spectral domain involving the in-plane double bond vibrations of the bases. Modifications of the initial duplex conformation (A family form for poly rG.poly rC, B family form for poly dG.poly dC) when the triplex is formed have been investigated. Two spectral domains (950-800 and 1450-1350 cm-1) containing absorption bands markers of the N and S type sugar geometries have been extensively studied. The spectra of the triplexes prepared starting with a double helix containing only riboses (poly rC+.poly rG.poly rC and poly dC+.poly rG.poly rC) as well as that of poly rC+.poly dG.poly dC present exclusively markers of the North type geometry of the sugars. On the contrary in the case of the poly dC+.poly dG.poly dC triplex both N and S type sugars are shown to coexist. The FTIR spectra allow us to propose that in this case the sugars of the purine (poly dG) strand adopt the S type geometry.     

Minor groove binding of Co(III)meso-tetrakis(N-methylpyridinium-4-yl)porphyrin to various duplex and triplex polynucleotides

The binding site and the geometry of Co(III)meso-tetrakis(N-methylpyridinium-4-yl)porphyrin (CoTMPyP) complexed with double helical poly(dA)·poly(dT) and poly(dG)·poly(dC), and with triple helical poly(dA)·[poly(dT)]₂ and poly(dC)·poly(dG)·poly(dC)⁺ were investigated by circular and linear dichroism (CD and LD). The appearance of monomeric positive CD at a low [porphyrin]/[DNA] ratio and bisignate CD at a high ratio of the CoTMPyP-poly(dA)·poly(dT) complex is almost identical with its triplex counterpart. Similarity in the CD spectra was also observed for the CoTMPyP-poly(dG)·poly(dC) and -poly(dC)·poly(dG)·poly(dC)⁺ complex. This observation indicates that both monomeric binding and stacking of CoTMPyP to these polynucleotides occur at the minor groove. However, different binding geometry of CoTMPyP, when bind to AT- and GC-rich polynucleotide, was observed by LD spectrum. The difference in the binding geometry may be attributed to the difference in the interaction between polynucleotides and CoTMPyP: in the GC polynucleotide case, amine group protrude into the minor groove while it is not present in the AT polynucleotide.     

Poly(dG).poly(dC) at neutral and alkaline pH: the formation of triple stranded poly(dG).poly(dG).poly(dC).

Alkaline titrations of different samples of poly(dG).poly(dC) and of the constituent homopolymers poly(dG) and poly(dC) have been performed in 0.15 M NaCl and their CD spectra followed. Sample I contained a slight excess of poly(dC) (52% C: 48% G) and showed a single reversible transition (pK = 11.9) due to the dissociation of double stranded poly(dG).poly(dC). Sample II, containing an excess of poly(dG) (43% C: 57% G), showed two transitions (pK1 = 11.4, PK2 = 11.9) the first one being only partially reversible. Examination of the CD spectra along the alkaline titrations indicated the presence of another hydrogen-bonded complex of higher G content. Mixing curves performed at pH 8 have confirmed the presence of a 2G: 1C complex, besides the double stranded complex. It can be formed in amounts up to 30% by mixing the two homopolymers, alkali treatment and heating. The CD spectra of the two complexes have been computed from the CD data of the mixing curves. This permitted the determination of the concentrations of both complexes and homopolymers in all samples. The ratio of triple to double stranded complex is not only dependent on the G/C ratio of the sample, but also a function of the previous physico-chemical conditions. These results explain the variability of many properties of different poly(dG).poly(dC) samples observed by other workers.     

Monoclonal antibodies specific for poly(dG) X poly(dC) and poly(dG) X poly(dm5C)

Most duplex DNAs that are in the "B" conformation are not immunogenic. One important exception is poly(dG) X poly(dC), which produces a good immune response even though, by many criteria, it adopts a conventional right-handed helix. In order to investigate what features are being recognized, monoclonal antibodies were prepared against poly(dG) X poly(dC) and the related polymer poly(dG) X poly(dm5C). Jel 72, which is an immunoglobulin G, binds only to poly(dG) X poly(dC), while Jel 68, which is an immunoglobulin M, binds approximately 10-fold more strongly to poly(dG) X poly(dm5C) than to poly(dG) X poly(dC). For both antibodies, no significant interaction could be detected with any other synthetic DNA duplexes including poly[d(Gm5C)] X poly[d(Gm5C)] in both the "B" and "Z" forms, poly[d(Tm5Cm5C)] X poly[d(GGA)], and poly[d(TCC)] X poly[d(GGA)], poly(dI) X poly(dC), or poly(dI) X poly(dm5C). The binding to poly(dG) X poly(dC) was inhibited by ethidium and by disruption of the DNA duplex, confirming that the antibodies were not recognizing single-stranded or multistranded structures. Furthermore, Jel 68 binds significantly to phage XP-12 DNA, which contains only m5C residues and will precipitate this DNA in the absence of a second antibody. The results suggest that (dG)n X (dm5C)n sequences in natural DNA exist in recognizably distinct conformations.     

Factor C from rabbit liver. A new poly(dC) and poly[d(G-C)] template-selective stimulatory protein of DNA polymerases

We have undertaken a search for mammalian DNA-binding proteins that enhance the activity of DNA polymerases in a template sequence-specific fashion. In this paper, we report the extensive purification and characterization of a new DNA-binding protein from rabbit liver that selectively stimulates DNA polymerases to copy synthetic poly[d(G-C)] and the poly(dC) strand of poly(dC).poly(dG) as well as single-stranded natural DNA that contains stretches of oligo(dC). The enhancing protein, a polypeptide of 65 kDa designated factor C, stimulates the copying of the two synthetic templates by Escherichia coli DNA polymerase I, Micrococcus luteus polymerase, and eukaryotic DNA polymerases alpha and beta, but not by avian myeloblastosis virus polymerase. Factor C, however, does not affect utilization by these polymerases of the poly(dG) strand of poly(dC).poly(dG), of poly(dC) primed by oligo(dG), or of poly(dA).poly(dT) and poly[d(A-T)]. With polymerase I, Michaelis constants (Km) of poly[d(G-C)] and of the poly(dC) strand of poly(dC).poly(dG) are decreased by factor C 37- and 4.7-fold, respectively, whereas maximum velocity (Vmax) remains unchanged. By contrast, neither the Km value of the poly(dG) strand of poly(dC).poly(dG) nor the Vmax value with this template is altered by factor C. Rates of copying of activated DNA, denatured DNA, or singly primed M13 DNA are not affected significantly by factor C. However, primer extension analysis of the copying of recombinant M13N4 DNA that contains runs of oligo(dC) within an inserted thymidine kinase gene shows that factor C increases processivity by specifically augmenting the efficiency at which polymerase I traverses the oligo(dC) stretches. Direct binding of factor C to denatured DNA is indicated by retention of the protein-DNA complex on columns of DEAE-cellulose. Binding of factor C to poly[d(G-C)] is demonstrated by the specific adsorption of the enhancing protein to columns of poly[d(G-C)]-Sepharose. We propose that by binding to poly[d(G-C)] and to poly(dC).poly(dG), factor C enables tighter binding of some DNA polymerases to these templates and facilitates enzymatic activity.     

Protonated polynucleotide structures. 18. Interaction of oligocytidylates with poly (G).

The faculty for and degree of oligo(C)-poly(G) interaction is described as an essentially chain length - sensitive phenomenon. At neutral pH under suitable experimental conditions, oligocytidylates of chain length greater than four associate with poly(G) to form double-stranded structures, as does poly(C). The extent of complex formation increases with degree of polymerization. The complex at acid pH is shown to be triple-stranded, of stoicheometry 2C/1G. The observation of a 2G/1C artifact is discussed.     

Hydrogen exchange study of some polynucleotides and transfer RNA

The apparent disagreement between published transfer RNA hydrogen exchange results and the tRNA cloverleaf model, prompted a re-investigation of the relationship between hydrogen exchange data and nucleic acid structure. Hydrogen-tritium exchange experiments were carried out with samples of pure and mixed tRNA and with the synthetic polynucleotide bihelices: poly(rA) · poly(rU), poly(rI) · poly(rC), poly(rG) · poly(rC) and poly(dG) · poly (dC).     

The complex of poly(dG).poly(dC) with arginine: stabilization of the B form and transition to multistranded structures

We have studied by X-ray diffraction fibers of complexes of poly(dG).poly(dC) with N-alpha-acetyl-L-arginine ethylamide. Although these polynucleotides favour the A form of DNA, in this complex it is never found, thus confirming that arginine prevents the appearance of this form of DNA. At high relative humidity the B form is present. Upon dehydration two new structures appear. One of them is a triple helix, most likely formed by poly(dC+).poly(dG).poly(dC). The other structure found also has features which indicate a multistranded conformation.     

In vitro synthesis of uniform poly(dG)-poly(dC) by Klenow exo- fragment of polymerase I

In this paper, we describe a production procedure of the one-to-one double helical complex of poly(dG)–poly(dC), characterized by a well-defined length (up to 10 kb) and narrow size distribution of molecules. Direct evidence of strands slippage during poly(dG)–poly(dC) synthesis by Klenow exo⁻ fragment of polymerase I is obtained by fluorescence resonance energy transfer (FRET). We show that the polymer extension results in an increase in the separation distance between fluorescent dyes attached to 5′ ends of the strands in time and, as a result, losing communication between the dyes via FRET. Analysis of the products of the early steps of the synthesis by high-performance liquid chromatography and mass spectroscopy suggest that only one nucleotide is added to each of the strand composing poly(dG)–poly(dC) in the elementary step of the polymer extension. We show that proper pairing of a base at the 3′ end of the primer strand with a base in sequence of the template strand is required for initiation of the synthesis. If the 3′ end nucleotide in either poly(dG) or poly(dC) strand is substituted for A, the polymer does not grow. Introduction of the T-nucleotide into the complementary strand to permit pairing with A-nucleotide results in the restoration of the synthesis. The data reported here correspond with a slippage model of replication, which includes the formation of loops on the 3′ ends of both strands composing poly(dG)–poly(dC) and their migration over long-molecular distances (μm) to 5′ ends of the strands.     

Assembling of G-strands into novel tetra-molecular parallel G4-DNA nanostructures using avidin-biotin recognition

We describe a method for the preparation of novel long (hundreds of nanometers), uniform, inter-molecular G4-DNA molecules composed of four parallel G-strands. The only long continuous G4-DNA reported so far are intra-molecular structures made of a single G-strand. To enable a tetra-molecular assembly of the G-strands we developed a novel approach based on avidin–biotin biological recognition. The steps of the G4-DNA production include: (i) Enzymatic synthesis of long poly(dG)-poly(dC) molecules with biotinylated poly(dG)-strand; (ii) Formation of a complex between avidin-tetramer and four biotinylated poly(dG)-poly(dC) molecules; (iii) Separation of the poly(dC) strands from the poly(dG)-strands, which are connected to the avidin; (iv) Assembly of the four G-strands attached to the avidin into tetra-molecular G4-DNA. The average contour length of the formed structures, as measured by AFM, is equal to that of the initial poly(dG)-poly(dC) molecules, suggesting a tetra-molecular mechanism of the G-strands assembly. The height of tetra-molecular G4-nanostructures is larger than that of mono-molecular G4-DNA molecules having similar contour length. The CD spectra of the tetra- and mono-molecular G4-DNA are markedly different, suggesting different structural organization of these two types of molecules. The tetra-molecular G4-DNA nanostructures showed clear electrical polarizability. This suggests that they may be useful for molecular electronics.     

The influence of Mg++ and Zn++ on polypurine-polypyrimidine multistranded helices

We have studied by X-ray diffraction fibres of complexes of polypurine-polypyrimidine with divalent cations. In the presence of Mg++, poly(dC) and poly(dG) form a very stable triple helix at neutral pH, based on G-G-C triplexes, whereas Zn++ prevents its formation, both at neutral and acidic pH. The poly(dC) . poly(dG) complex with Zn++ is of the B form, but its X-ray diffraction pattern shows an unusual intensity distribution. This is probably due to the fact that counterions occupy defined positions on the helix. The A form has not been observed. With poly[d(A-G)].poly [d(C-T)] a different triple helical structure is formed, both with Zn++ and Mg++. Direct, X-ray diffraction evidence for these triple helices is provided here for the first time.