Betaine Tripled the Volumetric Productivity of d(-)-lactate by Escherichia coli Strain SZ132 in Mineral Salts Medium

Osmotic stress restricts glycolytic flux, growth (rate and yield), d-lactate productivity, and d-lactate tolerance in Escherichia coli B strain SZ132 during batch fermentation in mineral salts medium with 10% (w/v) sugar. Addition of 1 mm betaine, a non-metabolized protective osmolyte, doubled cell yield, increased specific productivity of d-lactate and glycolytic flux by 50%, and tripled volumetric productivity (from 8.6 to 25.7 mmol l⁻¹ h⁻¹; 0.8 to 2.3 g l⁻¹ h⁻¹). Glycolytic flux and specific productivity in mineral salts medium with betaine exceeded that in Luria broth, substantially eliminating the need for complex nutrients during d-lactate production. In mineral salts medium supplemented with betaine, SZ132 produced approximately 1 mol d-lactate (90 g) per 100 g sugar (glucose or sucrose). Revisions requested 17 January 2006; Revisions received 7 February 2006     

Fed-batch production of <Emphasis Type="SmallCaps">d</Emphasis>-ribose from sugar mixtures by transketolase-deficient <Emphasis Type="Italic">Bacillus subtilis</Emphasis> SPK1

d-Ribose, a five-carbon sugar, is used as a key intermediate for the production of various biomaterials, such as riboflavin and inosine monophosphate. A high d-ribose-producing Bacillus subtilis SPK1 strain was constructed by the chemical mutation of the transketolase-deficient strain, B. subtilis JY1. Batch fermentation of B. subtilis SPK1 with 20 g l^–1 xylose and 20 g l^–1 glucose resulted in 4.78 g l^–1 dry cell mass, 23.0 g l^–1d-ribose concentration, and 0.72 g l^–1 h^–1 productivity, corresponding to a 1.5- to 1.7-fold increase when compared with values for the parental strain. A late-exponential phase was chosen as the best point for switching to a fed-batch process. Optimized fed-batch fermentation of B. subtilis SPK1, feeding a mixture of 200 g l^–1 xylose and 50 g l^–1 glucose after the late-exponential phase reduced the residual xylose and glucose concentrations to less than 7.0 g l^–1 and gave the best results of 46.6 g l^–1d-ribose concentration and 0.88 g l^–1 h^–1 productivity which were 2.0- and 1.2-fold higher than the corresponding values in a simple batch fermentation.     

Increased xylitol production rate during long-term cell recycle fermentation of Candida tropicalis

Long-term cell recycle fermentations of Candida tropicalis were performed over 14 rounds of fermentation. The average xylitol concentrations, fermentation times, volumetric productivities and product yields for 14 rounds were 105 g l^–1, 333 h, 4.4 g l^–1 h^–1 and 78%, respectively, in complex medium; and 110 g l^–1, 284 h, 5.4 g l^–1 h^–1 and 81%, respectively, in a chemically defined medium. These productivities were 1.7 and 2.4 times those with batch fermentation in the complex and chemically defined media, respectively. The xylitol yield from xylose with cell recycle fermentation using the chemically defined medium was 81% (w/w), which was 7% greater than the xylitol yield with batch fermentation (74%); both modes of fermentation gave the same yield using the complex medium. These results suggest that the chemically defined medium is more suitable for production of xylitol than complex medium.     

Optimization of lactic acid production by immobilized <Emphasis Type="Italic">Lactococcus lactis</Emphasis> IO-1

Production of lactic acid from glucose by immobilized cells of Lactococcus lactis IO-1 was investigated using cells that had been immobilized by either entrapment in beads of alginate or encapsulation in microcapsules of alginate membrane. The fermentation process was optimized in shake flasks using the Taguchi method and then further assessed in a production bioreactor. The bioreactor consisted of a packed bed of immobilized cells and its operation involved recycling of the broth through the bed. Both batch and continuous modes of operation of the reactor were investigated. Microencapsulation proved to be the better method of immobilization. For microencapsulated cells at immobilized cell concentration of 5.3 g l⁻¹, the optimal production medium had the following initial concentrations of nutrients (g l⁻¹): glucose 45, yeast extract 10, beef extract 10, peptone 7.5 and calcium chloride 10 at an initial pH of 6.85. Under these conditions, at 37 °C, the volumetric productivity of lactic acid in shake flasks was 1.8 g l⁻¹ h⁻¹. Use of a packed bed of encapsulated cells with recycle of the broth through the bed, increased the volumetric productivity to 4.5 g l⁻¹ h⁻¹. The packed bed could be used in repeated batch runs to produce lactic acid.     

The production of 2,3-butanediol by fermentation of high test molasses

Summary Klebsiella oxytoca fermented 199 g·l^–1 high test or invert molasses using batch fermentation with substrate shift to produce 95.2–98.6 g 2,3-butanediol·l^–1 and 2,4–4.3 g acetoin·l^–1 with a diol yield of 96–100% of the theoretical value and a diol productivity of 1.0–1.1 g·l^–1·h^–1. Fermentation was performed numerous times with molasses in repeated batch culture with cell recovery. Such repeated batch fermentation, in addition to a high product yield, also showed a very high product concentration. For example, 118 g 2,3-butanediol·l^–1 and 2.3 g acetoin·l^–1 were produced from 280 g·l^–1 of high test molasses. The diol productivity in this fermentation amounted to 2.4 g·l^–1·h^–1 and can undoubtedly be further increased by increasing the cell concentration. Because the Klebsiella cultures ferment 2,3-butanediol at an extremely high rate once the sugar has been consumed, the culture was inhibited completely by the addition of 15 g ethanol·l^–1 and switching off aeration. Offprint requests to: A. S. Afschar     

Bioconversion of compactin into pravastatin by Streptomyces sp.

Streptomyces sp. Y-110, isolated from soil, modified compactin to pravastatin, a therapeutic agent for hypercholesterolemia. In a batch culture, the highest production of pravastatin was 340 mg l^–1 from 750 mg compactin l^–1 in 24 h. By intermittent feeding of compactin into the culture medium, both the compactin concentration and its conversion increased to 2000 mg l^–1 and 1000 mg pravastatin l^–1, respectively, with the conversion rate of 10 mg l^–1 h^–1. Continuous feeding of compactin increased production of pravastatin to 15 mg l^–1 h^–1.     

An enzymatic route to produce pyruvate from lactate

A bacterial strain of Acinetobacter sp., which was capable of enzymatic production of pyruvate from lactate, was cultured in a 5-l reactor with a basal salt medium. After 14 h of fed-batch fermentation, 9.56 g l^–1 cell concentration in the broth was obtained with 20 g l^–1 (178 mM) sodium lactate and 4 g l^–1 NH₄Cl in the medium; and the biotransformation ability was 2.51 units ml^–1. The cells were harvested from one reactor and then used for pyruvate production from lactate in the same reactor. l-lactate at a concentration about 527 mM was almost stoichiometrically converted to pyruvate in 28 h. After a total 42 h of cell culture and biotransformation, the transformative yield was about 0.72 g g^–1 pyruvate from lactate and the rate of pyruvate production was calculated as 1.33 g l^–1 h^–1 during the process. The results suggested this simple enzymatic production of pyruvate from lactate should be a promising process and may bring a yield higher than that by microbial fermentation. By this process, the recovery of pyruvate from such a simple reaction liquid is relatively easy and inexpensive to perform.     

Production of xylitol in cell recycle fermentations of Candida tropicalis

Xylitol was produced a in two-substrate, batch fermentation with cell recycling of Candida tropicalis ATCC 13803. A series of cell-recycle experiments showed that the feeding of xylose, glucose and yeast extract in the xylitol production phase was most effective in enhancing xylitol productivity. The optimized cell recycle fermentation resulted in 0.82 g xylitol/g xylose yield, 4.94 g xylitol l^–1 h^–1 productivity, and final xylitol concentration of 189 g l^–1. These results were 1.3 times higher in volumetric xylitol productivity and 2.2 times higher in final product concentration compared with the corresponding values of the optimized two-substrate batch culture.     

Acetone butanol ethanol (ABE) production from concentrated substrate: reduction in substrate inhibition by fed-batch technique and product inhibition by gas stripping

Acetone butanol ethanol (ABE) was produced in an integrated fed-batch fermentation-gas stripping product-recovery system using Clostridium beijerinckii BA101, with H₂ and CO₂ as the carrier gases. This technique was applied in order to eliminate the substrate and product inhibition that normally restricts ABE production and sugar utilization to less than 20 g l^–1 and 60 g l^–1, respectively. In the integrated fed-batch fermentation and product recovery system, solvent productivities were improved to 400% of the control batch fermentation productivities. In a control batch reactor, the culture used 45.4 g glucose l^–1 and produced 17.6 g total solvents l^–1 (yield 0.39 g g^–1, productivity 0.29 g l^–1 h^–1). Using the integrated fermentation-gas stripping product-recovery system with CO₂ and H₂ as carrier gases, we carried out fed-batch fermentation experiments and measured various characteristics of the fermentation, including ABE production, selectivity, yield and productivity. The fed-batch reactor was operated for 201 h. At the end of the fermentation, an unusually high concentration of total acids (8.5 g l^–1) was observed. A total of 500 g glucose was used to produce 232.8 g solvents (77.7 g acetone, 151.7 g butanol, 3.4 g ethanol) in 1 l culture broth. The average solvent yield and productivity were 0.47 g g^–1 and 1.16 g l^–1 h^–1, respectively.     

Production of acetone,butanol and ethanol by Clostridium beijerinckii BA101 and in situ recovery by gas stripping

We examined the effect of gas-stripping on the in situ removal of acetone, butanol, and ethanol (ABE) from batch reactor fermentation broth. The mutant strain (Clostridium beijerinckii BA101) was not affected adversely by gas stripping. The presence of cells in the fermentation broth affected the selectivities of ABE. A considerable improvement in the productivity and yield was recorded in this work in comparison with the non-integrated process. In an integrated process of ABE fermentation-recovery using C. beijerinckii BA101, ABE productivities and yield were improved up to 200 and 118%, respectively, as compared to control batch fermentation data. In a batch reactor C. beijerinckii BA101 utilized 45.4 g glucose l^–1 and produced 17.7 g total ABE l^–1, while in the integrated process it utilized 161.7 g glucose l^–1 and produced total ABE of 75.9 g l^–1. In the integrated process, acids were completely converted to solvents when compared to the non-integrated process (batch fermentation) which contained residual acids at the end of fermentation. In situ removal of ABE by gas stripping has been reported to be one of the most important techniques of solvent removal. During these studies we were able to maintain the ABE concentration in the fermentation broth below toxic levels.     

Multiple growth inhibition of <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> in 1,3-propanediol fermentation

The inhibition of substrate and product on the growth of Klebsiella pneumoniae in anaerobic and aerobic batch fermentation for the production of 1,3-propanediol was studied. The cells under anaerobic conditions had a higher maximum specific growth rate of 0.19 h^–1 and lower tolerance to 110 g glycerol l^–1, compared to the maximum specific growth rate of 0.17 h^–1 and tolerance to 133 g glycerol l^–1 under aerobic conditions. Acetate was the main inhibitory metabolite during the fermentation under anaerobic conditions, with lactate and ethanol the next most inhibitory. The critical concentrations of acetate, lactate and ethanol were assessed to be 15, 19, 26 g l^–1, respectively. However, cells grown under aerobic conditions were more resistant to acetate and lactate but less resistant to ethanol. The critical concentrations of acetate, lactate and ethanol were assessed to be 24, 26, and 17 g l^–1, respectivelyRevisions requested 8 september; Revisions received 2 November 2004     

Reducing by-product formation in L-lactic acid fermentation by Rhizopus oryzae

During L-lactic acid fermentation by Rhizopus oryzae, increasing the phosphate level in the fermentation medium from 0.1 g l^–1 to 0.6 g l^–1 KH₂PO₄ reduced the maximal concentration of L-lactic acid and fumaric acid from 85 g l^–1 to 71 g l^–1 and from 1.36 g l^–1 to 0.18 g l^–1, respectively; and it decreased the fermentation time from 72 h to 52 h. Phosphate at 0.40 g l^–1 KH₂PO₄ was suitable for both minimizing fumaric acid accumulation and benefiting L-lactic acid production.     

Batch and repeated batch production of l(+)-lactic acid by Enterococcus faecalis RKY1 using wood hydrolyzate and corn steep liquor

Lactic acid production was investigated for batch and repeated batch cultures of Enterococcus faecalis RKY1, using wood hydrolyzate and corn steep liquor. When wood hydrolyzate (equivalent to 50 g l⁻¹ glucose) supplemented with 15–60 g l⁻¹ corn steep liquor was used as a raw material for fermentation, up to 48.6 g l⁻¹ of lactic acid was produced with, volumetric productivities ranging between 0.8 and 1.4 g l⁻¹ h⁻¹. When a medium containing wood hydrolyzate and 15 g l⁻¹ corn steep liquor was supplemented with 1.5 g l⁻¹ yeast extract, we observed 1.9-fold and 1.6-fold increases in lactic acid productivity and cell growth, respectively. In this case, the nitrogen source cost for producing 1 kg lactic acid can be reduced to 23% of that for fermentation from wood hydrolyzate using 15 g l⁻¹ yeast extract as a single nitrogen source. In addition, lactic acid productivity could be maximized by conducting a cell-recycle repeated batch culture of E. faecalis RKY1. The maximum productivity for this process was determined to be 4.0 g l⁻¹ h⁻¹.     

Characterisation of kinetic parameters and metabolic transition of Corynebacterium glutamicum on l-lysine production in continuous culture

Kinetic parameters and physiological states of Corynebacterium glutamicum at the growing and l-lysine-overproducing phase were characterised in continuous culture on threonine-limited complex and minimal media. High l-lysine productivity occurred at dilution rates ranging from 0.1 h^–1 to 0.3 h^–1 on threonine-limited complex medium, and at dilution rates ranging from 0.1 h^–1 to 0.15 h^–1 in minimal medium. l-Lysine yields of 0.25 g/g (0.31 g/g as l-lysine hydrochloride) in complex medium, and of 0.17 g/g (0.21 g/g as l-lysine hydrochloride) in minimal medium, corresponding respectively to intrinsic yields of 0.533 g/g and 0.572 g/g were obtained. These intrinsic yield factors are closed to the theoretical ones (0.608 g/g, 0.75 mol/mol). Intrinsic biomass yields were calculated as 0.658 g/g in complex medium and 0.283 g/g in minimal medium. CO₂ production has been clearly related to l-lysine production. According to our results on specific uptake rates and specific productivities in complex medium, metabolic rearrangement should occur during the transition from the growing phase to the l-lysine-overproducing phase. This phenomenon was further investigated.     

Production of medium chain length polyhydroxyalkanoates by fed-batch culture of Pseudomonas oleovorans

Pseudomonas oleovorans was cultivated to produce medium chain length polyhydroxyalkanoates (MCL-PHAs) from octanoic acid and ammonium nitrate as carbon and nitrogen source, respectively, by a pH-stat fed-batch culture technique. The octanoate in the culture broth was maintained below 4 g l^–1 by feeding the mixture of octanoic acid and ammonium nitrate when the culture pH rose above 7.1. The final cell concentrations of 63, 55 and 9.5 g l^–1, PHA contents of 62, 75 and 67% of dry cell wt, and productivities of 1, 0.63 and 0.16 g l^–1 h^–1 were obtained when the C/N ratios in the feed were 10, 20 and 100 g octanoic acid g^–1 ammonium nitrate, respectively.     

Repeated Batch Cultivation of Ralstonia eutropha for Poly (β-hydroxybutyrate) Production

Batch cultivation of Ralstonia eutropha NRRL B14690 attained 21 g biomass l⁻¹ and 9.4 g poly(β-hydroxybutyrate) l⁻¹ (0.45 g PHB g⁻¹ dry wt⁻¹) in 60 h. Repeated batch operation (empty-and-fill protocol) to remove 20% (v/v) of the culture broth and to supplement an equal volume of fresh media resulted in 49 g biomass l⁻¹ and 25 g PHB l⁻¹ (0.51 g PHB g⁻¹ dry wt⁻¹) with an overall productivity of 0.42 g PHB l⁻¹ h⁻¹ in 67 h. In the two cycles of repeated batch fermentation there was a 3-fold increase in productivity as compared to batch.     

Production of a recombinant, immunogenic protein, P64k, of Neisseria meningitidis in Escherichia coli in fed-batch fermenters

P64k is a Neisseria meningitidis high molecular weight protein present in meningococcal vaccine preparations. The lpdA gene, codifying for this protein, was cloned in Escherichia coli and the P64k protein was expressed in Escherichia coli K12 W3110 under the control of the tryptophan promoter. The recombinant bacteria were grown in batch or fed-batch cultures. P64k was expressed as an intracellular soluble form at about 40% of the total cellular protein. A final productivity of 215 mg l^–1 h^–1 and 11 g cell dry wt l^–1 were obtained when the fed-batch culture conditions were optimised, compared to 30% of total protein, and a productivity of 76 mg l^–1 h^–1 and 5.1 g cell dry wt l^–1 in batch cultivation.     

Selective production of bikaverin in a fluidized bioreactor with immobilized Gibberella fujikuroi

The best culture medium composition for the production of bikaverin by Gibberella fujikuroi in shake-flasks, i.e. 100 g glucose l^–1; 1 g NH₄Cl l^–1; 2 g rice flour l^–1; 5 g KH₂PO₄ l^–1 and 2.5 g MgSO₄ l^–1, was obtained through a fractional factorial design and then scaled-up to a fluidized bioreactor. The effects of carbon and nitrogen concentrations, inoculum size, aeration, flow rate and bead sizes on batch bikaverin production using immobilized G. fujikuroi in a fluidized bioreactor were determined by an orthogonal experimental design. Concentrations of up to 6.83 g bikaverin l^–1 were obtained when the medium contained 100 g glucose l^–1 and 1 g NH₄Cl l^–1 with an inoculum ratio of 10% v/v, an aeration rate of 3 volumes of air per volume of medium min^–1, and a bead size of 3 mm. Based on dry weight, the bikaverin production was 30–100 times larger than found in submerged culture and approximately three times larger than reported for solid substrate fermentation.     

Direct alcoholic fermentation of starchy biomass using amylolytic yeast strains in batch and immobilized cell systems

Summary Direct alcoholic fermentation of dextrin or soluble starch with selected amylolytic yeasts was studied in both batch and immobilized cell systems. In batch fermentations, Saccharomyces diastaticus was capable of fermenting high dextrin concentrations much more efficiently than Schwanniomyces castellii. From 200 g·l^–1 of dextrin S. diastaticus produced 77 g·l^–1 of ethanol (75% conversion efficiency). The conversion efficiency decreased to 59% but a higher final ethanol concentration of 120 g·l^–1 was obtained with a medium containing 400 g·l^–1 of dextrin. With a mixed culture of S. diastaticus and Schw. castellii 136 g·l^–1 of ethanol was produced from 400 g·l^–1 of dextrin (67% conversion efficiency). S. diastaticus cells attached well to polyurethane foam cubes and a S. diastaticus immobilized cell reactor produced 69 g·l^–1 of ethanol from 200 g·l^–1 of dextrin, corresponding to an ethanol productivity of 7.6g·l^–1·h^–1. The effluent from a two-stage immobilized cell reactor with S. diastaticus and Endomycopsis fibuligera contained 70 g·l^–1 and 80 g·l^–1 of ethanol using initial dextrin concentrations of 200 and 250 g·l^–1 respectively. The corresponding values for ethanol productivity were 12.7 and 9.6 g·l^–1·h^–1. The productivity of the immobilized cell systems was higher than for the batch systems, but much lower than for glucose fermentation.     

Physiological aspects of l-lysine production: effect of nutritional limitations on a producing strain of Corynebacterium glutamicum

The effect of nutritional limitations, such as phosphorus and carbon, on the production of l-lysine by Corynebacterium glutamicum was studied in continuous culture. We observed that phosphate-limited cultures at low growth rates were favourable to l-lysine production. l-Lysine was produced when a culture at low dilution rate (0.03 h^–1) was established. A dilution rate of about 0.04 h^–1 should be maintained in order to assure good productivity and an l-lysine yield of 0.53 g/g. Under carbon-limiting conditions the maintenance energy and growth yield of 0.03 g/g·g^–1·h^–1 and 0.41 g/g, respectively, have been obtained. Under these limiting conditions the l-lysine production was not favoured even at lower dilution rates.Correspondence to: N. Coello