The YORE-YORE gene regulates multiple aspects of epidermal cell differentiation in Arabidopsis

We have identified a new Arabidopsis mutant, yore-yore (yre), which has small trichomes and glossy stems. Adhesion between epidermal cells was observed in the organs of the yre shoot. The cloned YRE had high homology to plant genes involved in epicuticular wax synthesis, such as ECERIFERUM1 (CER1) and maize GLOSSY1. The phenotype of transgenic plants harboring double-stranded RNA interference (dsRNAi) YRE was quite similar to that of the yre mutant. The amount of epicuticular wax extracted from leaves and stems of yre-1 was approximately one-sixth of that from the wild type. YRE promoter::GUS and in situ hybridization revealed that YRE was specifically expressed in cells of the L1 layer of the shoot apical meristem and young leaves, stems, siliques, and lateral root primordia. Strong expression was detected in developing trichomes. The trichome structure of cer1 was normal, whereas that of the yre cer1 double mutant was heavily deformed, indicating that epicuticular wax is required for normal growth of trichomes. Double mutants of yre and trichome-morphology mutants, glabra2 (gl2) and transparent testa glabra1 (ttg1), showed that the phenotype of the trichome structure was additive, suggesting that the wax-requiring pathway is distinct from the trichome development pathway controlled by GL2 and TTG1.     

RDR1 and SGS3, Components of RNA-Mediated Gene Silencing, Are Required for the Regulation of Cuticular Wax Biosynthesis in Developing Inflorescence Stems of Arabidopsis

The cuticle is a protective layer that coats the primary aerial surfaces of land plants and mediates plant interactions with the environment. It is synthesized by epidermal cells and is composed of a cutin polyester matrix that is embedded and covered with cuticular waxes. Recently, we have discovered a novel regulatory mechanism of cuticular wax biosynthesis that involves the ECERIFERUM7 (CER7) ribonuclease, a core subunit of the exosome. We hypothesized that at the onset of wax production, the CER7 ribonuclease degrades an mRNA specifying a repressor of CER3, a wax biosynthetic gene whose protein product is required for wax formation via the decarbonylation pathway. In the absence of this repressor, CER3 is expressed, leading to wax production. To identify the putative repressor of CER3 and to unravel the mechanism of CER7-mediated regulation of wax production, we performed a screen for suppressors of the cer7 mutant. Our screen resulted in the isolation of components of the RNA-silencing machinery, RNA-DEPENDENT RNA POLYMERASE1 and SUPPRESSOR OF GENE SILENCING3, implicating RNA silencing in the control of cuticular wax deposition during inflorescence stem development in Arabidopsis (Arabidopsis thaliana).     

The Arabidopsis cer26 mutant,like the cer2 mutant,is specifically affected in the very long chain fatty acid elongation process

Plant aerial organs are covered by cuticular waxes, which form a hydrophobic crystal layer that mainly serves as a waterproof barrier. Cuticular wax is a complex mixture of very long chain lipids deriving from fatty acids, predominantly of chain lengths from 26 to 34 carbons, which result from acyl‐CoA elongase activity. The biochemical mechanism of elongation is well characterized; however, little is known about the specific proteins involved in the elongation of compounds with more than 26 carbons available as precursors of wax synthesis. In this context, we characterized the three Arabidopsis genes of the CER2‐like family: CER2, CER26 and CER26‐like . Expression pattern analysis showed that the three genes are differentially expressed in an organ‐ and tissue‐specific manner. Using individual T–DNA insertion mutants, together with a cer2 cer26 double mutant, we characterized the specific impact of the inactivation of the different genes on cuticular waxes. In particular, whereas the cer2 mutation impaired the production of wax components longer than 28 carbons, the cer26 mutant was found to be affected in the production of wax components longer than 30 carbons. The analysis of the acyl‐CoA pool in the respective transgenic lines confirmed that inactivation of both genes specifically affects the fatty acid elongation process beyond 26 carbons. Furthermore, ectopic expression of CER26 in transgenic plants demonstrates that CER26 facilitates the elongation of the very long chain fatty acids of 30 carbons or more, with high tissular and substrate specificity.     

Cuticular waxes on eceriferum mutants of Arabidopsis thaliana

We present cuticular wax chemical profiles for the leaves and stems of Arabidopsis wildtype Landsberg erecta and eleven isogenic eceriferum mutants: cer5, cer10 to cer15, and cer17 to cer20. These cer mutants have wax profiles that are different from those of wildtype in chemical chain length distribution, amount per chemical class, and/or total wax load. Analyses of detailed leaf and stem wax profiles for these cer mutants have allowed us to place some of these mutants at specific steps in wax production. The cer13 gene is predicted to affect release of the 30 carbon fatty acid from the elongation complex or the reduction of C30 fatty acid to C30 aldehyde. The CER19 gene product is predicted to be involved in C28 to C30 fatty acyl-CoA elongation. The CER20 gene is predicted to affect the oxidation of C29 alkane to C29 secondary alcohol. Several predicted gene products affect only stem specific steps in the wax pathway.     

Leaf Epicuticular Waxes of the Eceriferum Mutants in Arabidopsis

Wild-type Arabidopsis leaf epicuticular wax (EW) occurs as a smooth layer over the epidermal surface, whereas stem EW has a crystalline microstructure. Wild-type EW load was more than 10-fold lower on leaves than on stems. Compared with the EW on wild-type stems, EW on wild-type leaves had a much higher proportion of their total EW load in the form of alkanes and 1-alcohols; a large reduction in secondary alcohols, ketones, and esters; and a chain-length distribution for major EW classes that was skewed toward longer lengths. The eceriferum (cer) mutations often differentially affected leaf and stem EW chemical compositions. For example, the cer2 mutant EW phenotype was expressed on the stem but not on the leaf. Compared to wild type, the amount of primary alcohols on cer9 mutants was reduced on leaves but elevated on stems, whereas an opposite differential effect for primary alcohols was observed on cer16 leaves and stems. Putative functions for CER gene products are discussed. The CER4 and CER6 gene products may be involved in fatty aldehyde reduction and C26 fatty acylcoenzyme A elongation, respectively. CER1, CER8, CER9, and CER16 gene products may be involved in EW substrate transfer. The CER3 gene product may be involved in release of fatty acids from elongase complexes. CER2 gene product may have regulatory functions.     

Cytological and biochemical analysis of COF1, an Arabidopsis mutant of an ABC transporter gene

In transposon-tagged lines of Arabidopsis we found two new mutants, cof1-1 and cof1-2 (cuticular defect and organ fusion), that show the phenotype of wilting when grown in soil, organ fusion of rosette leaves and infertility. Toluidine blue testing and scanning electron microscopy observation revealed that these mutants had cuticular defects in the stems and adult leaves, but not in cotyledones. Transmission electron microscopy observation revealed thinner cuticle layers in the mutants, and cuticular materials interspersed between the two fused epidermal layers were observed in the mutant rosette leaves. These two mutants had a transposon insertion in the coding regions of WBC11, which was classified as a member of ABC transporter genes in Arabidopsis. WBC11 showed high sequence similarity to CER5 (also called WBC12), which was involved in cuticular lipid export. Gas chromatographic analysis revealed that C29 alkane extracted from the stem surface of cof1 mutants was reduced whereas C29 ketone was accumulated, which was different from the case of cer5 mutants. While cer5 mutants had fairly normal morphology, cof1 mutants had pleiotropic phenotypes so that COF1/WBC11 could have important roles different from those of CER5/WBC12. We also found that C29 alkane was accumulated in the intracellular extract of cof1 mutants, suggesting a function for WBC11 in the direct transport of lipid molecules. Pollen observation showed that mutant pollen grains were irregularly shaped. The function of COF1/WBC11 in lipid transport for the construction of cuticle layers and pollen coats for normal organ formation is discussed.     

The CER3 wax biosynthetic gene from Arabidopsis thaliana is allelic to WAX2/YRE/FLP1

The cuticle coats the aerial organs of land plants and is composed of a cutin matrix embedded and overlayed with waxes. The Arabidopsis CER3 gene is important for cuticular wax biosynthesis and was reported to correspond to At5g02310 encoding an E3 ubiquitin ligase. Here, we demonstrate that CER3 is not At5g02310 and instead corresponds to WAX2/YRE/FLP1 (At5g57800), a gene of unknown function required for wax biosynthesis. CER3 protein has also been implicated in cutin production because strong cer3 alleles display organ fusions. Leaf cutin analysis of two cer3 alleles did not reveal significant differences in cutin load or composition, indicating that CER3 has no major role in leaf cutin formation.     

Alterations in CER6, a gene identical to CUT1, differentially affect long-chain lipid content on the surface of pollen and stems

Very long chain lipids contribute to the hydrophobic cuticle on the surface of all land plants and are an essential component of the extracellular pollen coat in the Brassicaceae. Mutations in Arabidopsis CER genes eliminate very long chain lipids from the cuticle surface and, in some cases, from the pollen coat. In Arabidopsis, the loss of pollen coat lipids can disrupt interactions with the stigma, inhibiting pollen hydration and causing sterility. We have positionally cloned CER6 and demonstrate that a wild-type copy complements the cer6-2 defect. In addition, we have identified a fertile, intragenic suppressor, cer6-2R, that partially restores pollen coat lipids but does not rescue the stem wax defect, suggesting an intriguing difference in the requirements for CER6 activity on stems and the pollen coat. Importantly, analysis of this suppressor demonstrates that low amounts of very long chain lipids are sufficient for pollen hydration and germination. The predicted CER6 amino acid sequence resembles that of fatty acid-condensing enzymes, consistent with its role in the production of epicuticular and pollen coat lipids >28 carbons long. DNA sequence analysis revealed the nature of the cer6-1, cer6-2, and cer6-2R mutations, and segregation analysis showed that CER6 is identical to CUT1, a cDNA previously mapped to a different chromosome arm. Instead, we have determined that a new gene, CER60, with a high degree of nucleotide and amino acid similarity to CER6, resides at the original CUT1 locus.     

Novel<Emphasis Type="Italic"> eceriferum</Emphasis> mutants in<Emphasis Type="Italic"> Arabidopsis thaliana</Emphasis>

We conducted a novel non-visual screen for cuticular wax mutants in Arabidopsis thaliana (L.) Heynh. Using gas chromatography we screened over 1,200 ethyl methane sulfonate (EMS)-mutagenized lines for alterations in the major A. thaliana wild-type stem cuticular chemicals. Five lines showed distinct differences from the wild type and were further analyzed by gas chromatography and scanning electron microscopy. The five mutants were mapped to specific chromosome locations and tested for allelism with other wax mutant loci mapping to the same region. Toward this end, the mapping of the cuticular wax (cer) mutants cer10 to cer20 was conducted to allow more efficient allelism tests with newly identified lines. From these five lines, we have identified three mutants defining novel genes that have been designated CER22, CER23, and CER24. Detailed stem and leaf chemistry has allowed us to place these novel mutants in specific steps of the cuticular wax biosynthetic pathway and to make hypotheses about the function of their gene products.Abbreviations EMS Ethyl methane sulfonate - SEM Scanning electron microscopy - SSLP Simple sequence length polymorphism - WT Wild type     

Molecular characterization of the CER1 gene of arabidopsis involved in epicuticular wax biosynthesis and pollen fertility.

The aerial parts of plants are coated with an epicuticular wax layer, which is important as a first line of defense against external influences. In Arabidopsis, the ECERIFERUM (CER) genes effect different steps of the wax biosynthesis pathway. In this article, we describe the isolation of the CER1 gene, which encodes a novel protein involved in the conversion of long chain aldehydes to alkanes, a key step in was biosynthesis. CER1 was cloned after gene tagging with the heterologous maize transposable element system Enhancer-Inhibitor, also known as Suppressor-mutator. cer1 mutants display glossy green stems and fruits and are conditionally male sterile. The similarity of the CER1 protein with a group of integral membrane enzymes, which process highly hydrophobic molecules, points to a function of the CER1 protein as a decarbonylase.     

CUT1, an Arabidopsis gene required for cuticular wax biosynthesis and pollen fertility, encodes a very-long-chain fatty acid condensing enzyme.

Land plants secrete a layer of wax onto their aerial surfaces that is essential for survival in a terrestrial environment. This wax is composed of long-chain, aliphatic hydrocarbons derived from very-long-chain fatty acids (VLCFAs). Using the Arabidopsis expressed sequence tag database, we have identified a gene, designated CUT1, that encodes a VLCFA condensing enzyme required for cuticular wax production. Sense suppression of CUT1 in transgenic Arabidopsis plants results in waxless (eceriferum) stems and siliques as well as conditional male sterility. Scanning electron microscopy revealed that this was a severe waxless phenotype, because stems of CUT1-suppressed plants were completely devoid of wax crystals. Furthermore, chemical analyses of waxless plants demonstrated that the stem wax load was reduced to 6 to 7% of wild-type levels. This value is lower than that reported for any of the known eceriferum mutants. The severe waxless phenotype resulted from the downregulation of both the decarbonylation and acyl reduction wax biosynthetic pathways. This result indicates that CUT1 is involved in the production of VLCFA precursors used for the synthesis of all stem wax components in Arabidopsis. In CUT1-suppressed plants, the C24 chain-length wax components predominate, suggesting that CUT1 is required for elongation of C24 VLCFAs. The unique wax composition of CUT1-suppressed plants together with the fact that the location of CUT1 on the genetic map did not coincide with any of the known ECERIFERUM loci suggest that we have identified a novel gene involved in wax biosynthesis. CUT1 is currently the only known gene with a clearly established function in wax production.     

Characterization of Arabidopsis ABCG11/WBC11, an ATP binding cassette (ABC) transporter that is required for cuticular lipid secretion

ABCG11/WBC11, an ATP binding cassette (ABC) transporter from Arabidopsis thaliana, is a key component of the export pathway for cuticular lipids. Arabidopsis wbc11 T-DNA insertional knock-out mutants exhibited lipidic inclusions inside epidermal cells similar to the previously characterized wax transporter mutant cer5, with a similar strong reduction in the alkanes of surface waxes. Moreover, the wbc11 knock-out mutants also showed defects not present in cer5, including post-genital organ fusions, stunted growth and a reduction in cutin load on the plant surface. A mutant line previously isolated in a forward genetics screen, called permeable leaves 1 (pel1), was identified as an allele of ABCG11/WBC11. The double knock-out wbc11 cer5 exhibited the same morphological and biochemical phenotypes as the wbc11 knock-out. A YFP-WBC11 fusion protein rescued a T-DNA knock-out mutant and was localized to the plasma membrane. These results show that WBC11 functions in secretion of surface waxes, possibly by interacting with CER5. However, unlike ABCG12/CER5, ABCG11/WBC11 is important to the normal process of cutin formation.     

Overexpression of Arabidopsis ECERIFERUM1 promotes wax very-long-chain alkane biosynthesis and influences plant response to biotic and abiotic stresses

Land plant aerial organs are covered by a hydrophobic layer called the cuticle that serves as a waterproof barrier protecting plants against desiccation, ultraviolet radiation, and pathogens. Cuticle consists of a cutin matrix as well as cuticular waxes in which very-long-chain (VLC) alkanes are the major components, representing up to 70% of the total wax content in Arabidopsis (Arabidopsis thaliana) leaves. However, despite its major involvement in cuticle formation, the alkane-forming pathway is still largely unknown. To address this deficiency, we report here the characterization of the Arabidopsis ECERIFERUM1 (CER1) gene predicted to encode an enzyme involved in alkane biosynthesis. Analysis of CER1 expression showed that CER1 is specifically expressed in the epidermis of aerial organs and coexpressed with other genes of the alkane-forming pathway. Modification of CER1 expression in transgenic plants specifically affects VLC alkane biosynthesis: waxes of TDNA insertional mutant alleles are devoid of VLC alkanes and derivatives, whereas CER1 overexpression dramatically increases the production of the odd-carbon-numbered alkanes together with a substantial accumulation of iso-branched alkanes. We also showed that CER1 expression is induced by osmotic stresses and regulated by abscisic acid. Furthermore, CER1-overexpressing plants showed reduced cuticle permeability together with reduced soil water deficit susceptibility. However, CER1 overexpression increased susceptibility to bacterial and fungal pathogens. Taken together, these results demonstrate that CER1 controls alkane biosynthesis and is highly linked to responses to biotic and abiotic stresses.