Purification, characterization and mass spectroscopic analysis of thermo-alkalotolerant ��-1, 4 endoxylanase from Bacillus sp. and its potential for dye decolorization

A Bacillus sp., isolated from sludge and sediments of pulp and paper mill, was found to produce xylanase in a synthetic culture media containing oat spelt xylan (1% w/v) and 10% black liquor as inducers along with 2.5% (w/v) sucrose as additional carbon source. The purified enzyme was highly thermostable with half-life of 10 min at 90 °C and pH 8. The enzyme was stable over a broad range of pH (pH 6-10) and showed good thermal stability when incubated at 70 °C. Chemicals like EDTA, Hg²⁺, Cu²⁺ and solvents like glycerol and acetonitrile completely inhibited enzyme activity at high concentration. The molecular weights of the purified enzyme, determined by matrix-assisted laser desorption/ionization coupled with time-of-flight mass spectrometry (MALDI-TOF/MS) analysis was analogous to the results obtained from SDS-PAGE, i.e. 55 kDa. Kinetic parameters were determined by using oat spelt xylan as substrate. The K_M and V_max values of the enzyme were 4.4 mg/ml and 287 U/mg respectively. At high xylan concentrations (>70 mg/ml) a substrate inhibition phenomenon of the enzyme was observed. In addition, crude xylanase showed enormous potential for decolorization of various recalcitrant dyes.     

Identification of a novel cellulose-binding domain within the endo-β-1,4-xylanase KRICT PX-3 from Paenibacillus terrae HPL-003

The model 3-D structure of xylanase KRICT PX3 (JF320814) identified by DNA sequence analysis revealed a catalytic domain and CBM4-9 which functions as a xylan binding domain (XBD). To identify its role in xylan hydrolysis, six expression plasmids were constructed encoding the N-terminal CBM plus the catalytic domain or different glycosyl hydrolases, and the biochemical properties of the recombinant enzymes were compared to the original structure of PX3 xylanase. All six of the recombinant xylanases with the addition of CBM in the pIVEX-GST expression vector showed no improved PX3 hydrolytic activity. However, the absence of the CBM domain resulted in a decrement of 40% in thermostability, movement of the optimal temperature from 55 °C to 45 °C, alteration of the optimal pH range from 5⿿10 to 6⿿8, and reduction of the enzymatic activity to one-second under the same condition, respectively. The putative XBD in PX3 comprises a new N-terminal domain homologous to the catalytic thermostabilizing domains from other xylanases. Analysis of the main products released from xylan indicate that the recombinant enzymes act as endo-1,4-β-xylanases but differ in their hydrolysis of xylan from beech wood, birch wood, and oat spelt.     

Molecular cloning and characterization of the novel acidic xylanase XYLD from Bispora sp. MEY-1 that is homologous to family 30 glycosyl hydrolases

We cloned and sequenced a xylanase gene named xylD from the acidophilic fungus Bispora sp. MEY-1 and expressed the gene in Pichia pastoris. The 1,422-bp full-length complementary DNA fragment encoded a 457-amino acid xylanase with a calculated molecular mass of 49.8 kDa. The mature protein of XYLD showed high sequence similarity to both glycosyl hydrolase (GH) families 5 and 30 but was more homologous to members of GH 30 based on phylogenetic analysis. XYLD shared the highest identity (49.9%) with a putative endo-1,6-β-d-glucanase from Talaromyces stipitatus and exhibited 21.1% identity and 34.3% similarity to the well-characterized GH family 5 xylanase from Erwinia chrysanthemi. Purified recombinant XYLD showed maximal activity at pH 3.0 and 60 °C, maintained more than 60% of maximal activity when assayed at pH 1.5–4.0, and had good thermal stability at 60 °C and remained stable at pH 1.0–6.0. The enzyme activity was enhanced in the presence of Ni²⁺ and β-mercaptoethanol and inhibited by some metal irons (Hg²⁺, Cu²⁺, Pb²⁺, Mn²⁺, Li⁺, and Fe³⁺) and sodium dodecyl sulfate. The specific activity of XYLD for beechwood xylan, birchwood xylan, 4-O-methyl-d-glucuronoxylan, and oat spelt xylan was 2,463, 2,144, 2,020, and 1,429 U mg⁻¹, respectively. The apparent K _m and V _max values for beechwood xylan were 5.6 mg ml⁻¹ and 3,622 μmol min⁻¹ mg⁻¹, respectively. The hydrolysis products of different xylans were mainly xylose and xylobiose.     

Molecular and biochemical characterization of a new alkaline active multidomain xylanase from alkaline wastewater sludge

A xylanase gene, xyn-b39, coding for a multidomain glycoside hydrolase (GH) family 10 protein was cloned from the genomic DNA of the alkaline wastewater sludge of a paper mill. Its deduced amino acid sequence of 1,481 residues included two carbohydrate-binding modules (CBM) of family CBM_4_9, one catalytic domain of GH 10, one family 9 CBM and three S-layer homology (SLH) domains. xyn-b39 was expressed heterologously in Escherichia coli, and the recombinant enzyme was purified and characterized. Xyn-b39 exhibited maximum activity at pH 7.0 and 60 °C, and remained highly active under alkaline conditions (more than 80 % activity at pH 9.0 and 40 % activity at pH 10.0). The enzyme was thermostable at 55 °C, retaining more than 90 % of the initial activity after 2 h pre-incubation. Xyn-b39 had wide substrate specificity and hydrolyzed soluble substrates (birchwood xylan, beechwood xylan, oat spelt xylan, wheat arabinoxylan) and insoluble substrates (oat spelt xylan and wheat arabinoxylan). Hydrolysis product analysis indicated that Xyn-b39 was an endo-type xylanase. The K _m and V _max values of Xyn-b39 for birchwood xylan were 1.01 mg/mL and 73.53 U/min/mg, respectively. At the charge of 10 U/g reed pulp for 1 h, Xyn-b39 significantly reduced the Kappa number (P < 0.05) with low consumption of chlorine dioxide alone.     

Identification and characterization of a novel xylanase derived from a rice straw degrading enrichment culture

A metagenomic library containing ca. 3.06 × 10⁸ bp insert DNA was constructed from a rice straw degrading enrichment culture. A xylanase gene, umxyn10A, was cloned by screening the library for xylanase activity. The encoded enzyme Umxyn10A showed 58% identity and 73% similarity with a xylanase from Thermobifida fusca YX. Sequence analyses showed that Umxyn10A contained a glycosyl hydrolase family 10 catalytic domain. The gene was expressed in Escherichia coli, and the recombinant enzyme was purified and characterized biochemically. Recombinant Umxyn10A was highly active toward xylan. However, the purified enzyme could slightly hydrolyze β-1,3/4-glucan and β-1,3/6-glucan. Umxyn10A displayed maximal activity toward oat spelt xylan at a high temperature (75°C) and weak acidity (pH 6.5). The K _m and V _max of Umxyn10A toward oat spelt xylan were 3.2 mg ml⁻¹ and 0.22 mmol min⁻¹ mg⁻¹ and were 2.7 mg ml⁻¹ and 1.0 mmol min⁻¹ mg⁻¹ against birchwood xylan, respectively. Metal ions did not appear to be required for the catalytic activity of this enzyme. The enzyme Umxyn10A could efficiently hydrolyze birchwood xylan to release xylobiose as the major product and a negligible amount of xylose. The xylanase identified in this work may have potential application in producing xylobiose from xylan.     

A new acidophilic endo-β-1,4-xylanase from Penicillium oxalicum: cloning,purification, and insights into the influence of metal ions on xylanase activity

A new acidophilic xylanase (XYN11A) from Penicillium oxalicum GZ-2 has been purified, identified and characterized. Synchronized fluorescence spectroscopy was used for the first time to evaluate the influence of metal ions on xylanase activity. The purified enzyme was identified by MALDI TOF/TOF mass spectrometry, and its gene (xyn11A) was identified as an open reading frame of 706 bp with a 68 bp intron. This gene encodes a mature protein of 196 residues with a predicted molecular weight of 21.3 kDa that has the 100 % identity with the putative xylanase from the P. oxalicum 114-2. The enzyme shows a structure comprising a catalytic module family 10 (GH10) and no carbohydrate-binding module family. The specific activities were 150.2, 60.2, and 72.6 U/mg for beechwood xylan, birchwood xylan, and oat spelt xylan, respectively. XYN11A exhibited optimal activity at pH 4.0 and remarkable pH stability under extremely acidic condition (pH 3). The specific activity, K _m and V _max values were 150.2 U/mg, 30.7 mg/mL, and 403.9 μmol/min/mg for beechwood xylan, respectively. XYN11A is a endo-β-1,4-xylanase since it release xylobiose and xylotriose as the main products by hydrolyzing xylans. The activity of XYN11A was enhanced 155 % by 1 mM Fe²⁺ ions, but was inhibited strongly by Fe³⁺. The reason of enhancing the xylanase activity of XYN11A with 1 mM Fe²⁺ treatment may be responsible for the change of microenvironment of tryptophan residues studied by synchronous fluorescence spectrophotometry. Inhibition of the xylanase activity by Fe³⁺ was first time demonstrated to associate tryptophan fluorescence quenching.     

Biochemical characterization of a novel cycloisomaltooligosaccharide glucanotransferase from Paenibacillus sp. 598K

Cycloisomaltooligosaccharide glucanotransferase (CITase; EC 2.4.1.248), a member of the glycoside hydrolase family 66 (GH66), catalyzes the intramolecular transglucosylation of dextran to produce cycloisomaltooligosaccharides (CIs; cyclodextrans) of varying lengths. Eight CI-producing bacteria have been found; however, CITase from Bacillus circulans T-3040 (CITase-T3040) is the only CI-producing enzyme that has been characterized to date. In this study, we report the gene cloning, enzyme characterization, and analysis of essential Asp and Glu residues of a novel CITase from Paenibacillus sp. 598K (CITase-598K). The cit genes from T-3040 and 598K strains were expressed recombinantly, and the properties of Escherichia coli recombinant enzymes were compared. The two CITases exhibited high primary amino acid sequence identity (67%). The major product of CITase-598K was cycloisomaltoheptaose (CI-7), whereas that of CITase-T3040 was cycloisomaltooctaose (CI-8). Some of the properties of CITase-598K are more favorable for practical use compared with CITase-T3040, i.e., the thermal stability for CITase-598K (≤ 50 °C) was 10 °C higher than that for CITase-T3040 (≤ 40 °C); the k_cat/K_M value of CITase-598K was approximately two times higher (32.2 s^− 1 mM^− 1) than that of CITase-T3040 (17.8 s^− 1 mM^− 1). Isomaltotetraose was the smallest substrate for both CITases. When isomaltoheptaose or smaller substrates were used, a lag time was observed before the intramolecular transglucosylation reaction began. As substrate length increased, the lag time shortened. Catalytically important residues of CITase-598K were predicted to be Asp144, Asp269, and Glu341. These findings will serve as a basis for understanding the reaction mechanism and substrate recognition of GH66 enzymes.     

The C-terminal region of xylanase domain in Xyn11A from Paenibacillus curdlanolyticus B-6 plays an important role in structural stability

Paenibacillus curdlanolyticus B-6 produces an extracellular multienzyme complex containing a major xylanase subunit, designated Xyn11A, which includes two functional domains belonging to glycosyl hydrolase family-11 (GH11) and carbohydrate binding module family-36 (CBM36) and possesses a glycine and asparagine-rich linker (linker). To clarify the roles of each functional domain, recombinant proteins XynXL and XynX (CBM36 deleted and CBM36 and linker deleted, respectively) were constructed. Their xylanase activities were similar toward soluble xylan, whereas XynXL showed decreased hydrolysis activity toward insoluble xylan while XynX had no xylanase activity. To determine the significance of the linker and its neighbor region, XynX was subjected to secondary structural alignments using circular dichroism (CD) spectroscopy and three-dimensional (3D) structural analysis. A seven amino acid (NTITIGG) neighbor linker sequence was highly conserved among GH11 xylanases of Paenibacillus species. Although XynX exhibited a typical GH11 xylanase structure, conformational gaps were observed in the β6- and β12-sheets and in CD spectra. Flipping of the Arg163 side chains in the subsite was also observed upon analysis of superimposed models. Docking analysis using xylohexaose indicated that flipping of the Arg163 side chains markedly affected substrate binding in the subsite. To identify the amino acids related to stabilizing the substrate binding site, XynX with an extended C-terminal region was designed. At least seven amino acids were necessary to recover substrate binding and xylanase activity. These results indicated that the seven amino acid neighbor Xyn11A linker plays an important role in the activity and conformational stability of the xylanase domain.     

Purification and characterization of a new xylanase (xylanase C) produced by Streptomyces lividans 66

Summary A third extracellular xylanase produced by Streptomyces lividans 66 was isolated from a clone obtained by shotgun cloning through functional complementation of a xylanase- and cellulase-negative mutant using the multicopy vector pIJ702. This enzyme, designated xylanase C, has a relative molecular mass of 22000 and acts on xylan similarly to xylanase B as an endo-type xylanase producing short-chain oligoxylosides. Its specific activity determined at 1100 IU·mg^–1 of protein corresponds on a molecular basis to that of xylanase B and is about three times that of xylanase A. The enzyme shows optimal activity at pH 6.0 and 57°C, values that correspond closely to those observed previously for xylanase A and B. Xylanase C appears not to be glycosylated and has a pI > 10.25. Its K _m and V _max on birchwood xylan are 4.1 mg·ml^–1 and 3.0 mol·min^–1·mg^–1 of enzyme respectively. Whereas specific antibodies raised against xylanase A show no cross-reaction with either xylanase B or with xylanase C, the anti-(xylanase C) antibodies react slightly with xylanase B but not with xylanase A. A comparison of hydrolysis products obtained by reacting individually the three enzymes with birchwood xylan showed characteristic endo-activity patterns for xylanases B and C, whereas xylanase A hydrolysed the substrate preferentially into xylobiose and xylotriose. Sequential xylanase action on the same substrates showed synergistic hydrolysis only when endo-xylanase activity was followed by that of xylanase A.     

A new xylanase from Streptomyces megasporus DSM 41476 with high yield of xylobiose

A new xylanase gene, xynBM4, was cloned from Streptomyces megasporus DSM 41476 and expressed in Pichia pastoris. The full-length gene consists of 1,443 bp and encodes 480 amino acids including a putative 49-residue signal peptide. The deduced amino acid sequence of xynBM4 shows the highest identity of 66.3% to the xylanase Xys1L from Streptomyces halstedii JM8. The purified recombinant XYNBM4 had a high specific activity of 350.7 U mg^-1 towards soluble wheat arabinoxylan, exhibited optimal activity at pH 6.0 and 57°C, showed broad pH adaptability (>75% of the maximum activity at pH 2.5–9.0), was resistant to neutral proteases and most chemicals, and produced simple products. The hydrolysis products of birchwood xylan and corncob xylan were predominantly xylobiose (76.9 and 90.8%, respectively) and no xylose. These characteristics suggest that XYNBM4 has potential in various applications, especially in the food industry.     

Production of xylooligosaccharides by xylanase from Pichia stipitis based on xylan preparation from triploid Populas tomentosa

Xylooligosaccharides (XOS) with DP 2-4 are important synbiotics used as food ingredients based on its prebiotic characteristics. In this work, the production of XOS from lignocellulosic material was performed by combined chemical-enzymatic methods. Xylan was prepared from triploid Populas tomentosa, and bioconverted into XOS by crude xylanase solution obtained from Pichia stipitis. The effects of reaction time, temperature, enzyme dosage, and pH value on the production of XOS were fully evaluated. Under the optimal condition (25 U g⁻¹ substrate, pH 5.4 and 50 °C), 36.8% of the xylan preparation was converted to XOS, equivalent to 3.95 mg/mL of the hydrolyzate. Xylobiose, xylotriose and xylotetrose were analyzed to be the main products of the enzymatic hydrolyzate, which together accounted for over 95% of the released oligosaccharides. Meanwhile, the effect of sonication pretreatment on the conversion efficiency of the xylan preparation was also investigated.     

A novel cold-active xylanase from the cellulolytic myxobacterium Sorangium cellulosum So9733-1: gene cloning, expression, and enzymatic characterization

The cellulolytic myxobacterium Sorangium cellulosum is able to efficiently degrade many kinds of polysaccharides, but none of the enzymes involved have been characterized. In this paper, a xylanase gene (xynA) was cloned from S. cellulosum So9733-1 using thermal asymmetric interlaced PCR. The gene is composed of 1,209 bp and has only 52.27% G + C content, which is much lower than that of most myxobacterial DNA reported (67–72%). Gene xynA encodes a 402 amino acid protein that contains a single catalytic domain belonging to the glycoside hydrolase family 10. The novel xylanase gene, xynA, was expressed in Escherichia coli BL21 (DE3) and the recombinant protein (r-XynA) was purified by Ni-affinity chromatography. The r-XynA had the optimum temperature of 30–35°C and exhibited 33.3% activity at 5°C and 13.7% activity at 0°C. Approximately 80% activity was lost after 20-min pre-incubation at 50°C. These results indicate that r-XynA is a cold-active xylanase with low thermostability. At 30°C, the K _m values of r-XynA on beechwood xylan, birchwood xylan, and oat spelt xylan were 25.77 ± 4.16, 26.52 ± 4.78, and 38.13 ± 5.35 mg/mL, respectively. The purified r-XynA displayed optimum activity at pH 7.0. The activity of r-XynA was enhanced by the presence of Ca²⁺. The r-XynA hydrolyzed beechwood xylan, birchwood xylan, and xylooligosaccharides (xylotriose, xylotetraose, and xylopentose) to produce primarily xylose and xylobiose. To our knowledge, this is the first report on the characterization of a xylanase from S. cellulosum.     

Cloning of a Family 11 Xylanase Gene from Bacillus amyloliquefaciens CH51 Isolated from Cheonggukjang

Bacillus amyloliquefaciens CH51, an isolate from cheonggukjang, Korean fermented soyfood, secretes several enzymes into culture medium. A gene encoding 19 kDa xylanase was cloned by PCR. Sequencing showed that the gene encoded a glycohydrolase family 11 xylanase and named xynA. xynAHis, xynA with additional codons for his-tag, was overexpressed in Escherichia coli BL21(DE3) using pET-26b(+). XynAHis was purified using HisTrap affinity column. K_m and V_max of XynAHis were 0.363 mg/ml and 701.1 μmol/min/mg, respectively with birchwood xylan as a substrate. The optimum pH and temperature were pH 4 and 25 °C, respectively. When xynA was introduced into Bacillus subtilis WB600, active XynA was secreted into culture medium.     

Purification and enzymatic characterization of two β-endoxylanases from Trichoderma sp. K9301 and their actions in xylooligosaccharide production

Trichoderma sp. K9301 secreting endoxylanases with an activity of 2836 U/g (dry weight) was screened for XOs production. Two acidic β-endoxylanases EX1 (30.1 kDa) and EX2 (20.1 kDa) were purified from crude extract of the strain K9301 in solid fermentation. Action modes of EX1 and EX2 towards XOs showed similar hydrolysis characters to endoxylanases belonging to glycosyl hydrolase family 10 and 11, respectively. EX1 exhibited better affinity but lower hydrolytic efficiency than EX2 to xylans from beechwood, birchwood, and oat-spelt. They had synergistic action on xylan hydrolysis. The optimum condition to prepare XOs from corncobs was obtained as 10 mg/ml corncob xylan incubated with 10 U/mg crude enzymes at 50 °C for 3 h. The yield of XOs reached 43.3%, and only a little amount of xylose (3.1%) was simultaneously produced, suggesting the good potential of strain K9301 in XOs production.     

Hydrolysis of xylans by a thermostable hybrid xylanase expressed in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Escherichia coli-expressed a hybrid xylanase, Btx, encoded by a designed hybrid xylanase gene btx was purified. The molecular mass of the enzyme was estimated to be 22 kDa. The K _m and k _cat values for Btx were 1.9 mg/ml and 140 s⁻¹, respectively. It hydrolyzed xylan principally to xylobiose and xylotriose, and was functionally similar to family 11 xylanases. As some differences were found in the hydrolytic products between birchwood xylan and wheat bran insoluble xylan, the xylan binding domains in xylanase Btx must have different effects on soluble and insoluble xylan.     

A novel multifunctional cellulolytic enzyme screened from metagenomic resources representing ruminal bacteria

Metagenomic resources representing ruminal bacteria were screened for novel exocellulases using a robotic, high-throughput screening system, the novel CelEx-BR12 gene was identified and the predicted CelEx-BR12 protein was characterized. The CelEx-BR12 gene had an open reading frame (ORF) of 1140 base pairs that encoded a 380-amino-acid-protein with a predicted molecular mass of 41.8 kDa. The amino acid sequence was 83% identical to that of a family 5 glycosyl hydrolase from Prevotella ruminicola 23. Codon-optimized CelEx-BR12 was overexpressed in Escherichia coli and purified using Ni–NTA affinity chromatography. The Michaelis–Menten constant (K_m value) and maximal reaction velocity (V_max values) for exocellulase activity were 12.92 μM and 1.55 × 10⁻⁴ μmol min⁻¹, respectively, and the enzyme was optimally active at pH 5.0 and 37 °C. Multifunctional activities were observed against fluorogenic and natural glycosides, such as 4-methylumbelliferyl-β-d-cellobioside (0.3 U mg⁻¹), CMC (105.9 U mg⁻¹), birch wood xylan (132.3 U mg⁻¹), oat spelt xylan (67.9 U mg⁻¹), and 2-hydroxyethyl-cellulose (26.3 U mg⁻¹). Based on these findings, we believe that CelEx-BR12 is an efficient multifunctional enzyme as endocellulase/exocellulase/xylanase activities that may prove useful for biotechnological applications.     

Cloning and characterization of the first GH10 and GH11 xylanases from Rhizopus oryzae

The only available genome sequence for Rhizopus oryzae strain 99-880 was annotated to not encode any β-1,4-endoxylanase encoding genes of the glycoside hydrolase (GH) family 10 or 11. Here, we report the identification and cloning of two such members in R. oryzae strain NRRL 29086. Strain 29086 was one of several selected fungi grown on wheat or triticale bran and screened for xylanase activity among other hydrolytic actions. Its high activity (138 U/ml) in the culture supernatant led to the identification of two activity-stained proteins, designated Xyn-1 and Xyn-2 of respective molecular masses 32,000 and 22,000. These proteins were purified to electrophoretic homogeneity and characterized. The specific activities of Xyn-1 and Xyn-2 towards birchwood xylan were 605 and 7,710 U/mg, respectively. Kinetic data showed that the lower molecular weight Xyn-2 had a higher affinity (K _m?=?3.2?±?0.2 g/l) towards birchwood xylan than Xyn-1 by about 4-fold. The melting temperature (T _m) of the two proteins, estimated to be in the range of 49.5–53.7 °C indicated that they are rather thermostable proteins. N-terminal and internal peptide sequences were obtained by chemical digestion of the purified xylanases to facilitate cloning, expression in Escherichia coli, and sequencing of the respective gene. The cloned Rhizopus xylanases were used to demonstrate release of xylose from flax shives-derived hemicellulose as model feedstock. Overall, this study expands the catalytic toolbox of GH10 and 11 family proteins that have applications in various industrial and bioproducts settings.     

Heterologous expression of thermostable acetylxylan esterase gene from Thermobifida fusca and its synergistic action with xylanase for the production of xylooligosaccharides

The axe gene which encodes an acetylxylan esterase from Thermobifida fusca NTU22, was cloned, sequenced and expressed in Escherichia coli. The gene consists of 786 base pairs and encodes a protein of 262 amino acids. The deduced amino acid sequence of the acetylxylan esterase axe exhibited a high degree of similarity with BTA-hydrolase from T. fusca DSM43793, esterase from Thermobifida alba and lipase from Streptomyces albus. The optimal pH and temperature of the purified esterase were 7.5 and 60 °C, respectively. Cooperative enzymatic treatment of oat-spelt xylan by transformant xylanase and acetylxylan esterase significantly increased the xylooligosaccharides production compared with the xylanase or acetylxylan esterase action alone. The synergy of transformant acetylxylan esterase and xylanase cannot increase the production of reducing sugars from lignocellulolytic substrate, bagasse.