The microtubule-associated protein tau forms a triple-stranded left-hand helical polymer

High resolution transmission electron microscopy (TEM) has shown that bovine tau are 2.1 +/- 0.2-nm diameter filaments which are triple-stranded left-hand helical structures composed of three 1.0 +/- 0.2-nm strands. The reported amino acid sequence of human and bovine tau have been computer processed to predict secondary structure. Within the constraints imposed by the images, the secondary structure models and other structural information have been used to calculate tau's maximum and minimum length. The length calculations and secondary structure form the basis for image interpretation. This work indicates that each approximately 1.0-nm strand is a tau polypeptide chain and that the approximately 2.1-nm filament is composed of three separate tau chains (tau3). Bovine tau length measurements indicate that tau trimer filaments are generally longer than a fully extended tau monomer. These measurements indicate that each trimer, tau3, is joined with other trimers to form long tau polymers, (tau3)n. An inverse temperature transition has been found in the circular dichroism spectrum of tau indicating that its structure is less ordered below 20 degrees C and more ordered at 37 degrees C. The implications of this phenomenon with respect to tau's temperature-dependent ability to reconstitute microtubules is discussed and a mechanism for the possible abnormal aggregation of tau into neurofibrillary tangles in Alzheimer's disease is proposed.     

Effect of the light chain C-terminal serine residue on disulfide bond susceptibility of human immunoglobulin G1λ

The light chain cysteine residue that forms an interchain disulfide bond with the cysteine residue in the heavy chain in IgG1κ is the last amino acid. The cysteine residue is followed by a serine residue in IgG1λ. Effect of the serine residue on the susceptibility of disulfide bonds to reduction was investigated in the current study using a method including reduction, differential alkylation using iodoacetic acid with either natural isotopes or enriched with carbon-13, and mass spectrometry analysis. This newly developed method allowed an accurate determination of the susceptibility of disulfide bonds in IgG antibodies. The effect of the serine residue on disulfide bond susceptibility was compared using three antibodies with differences only in the light chain last amino acid, which was either a serine residue, an alanine residue or deleted. The results demonstrated that the presence of the amino acid (serine or alanine) increased the susceptibility of the inter light and heavy chain disulfide bonds to reduction. On the other hand, susceptibility of the two inter heavy chain disulfide bonds and intrachain disulfide bonds was not changed significantly.     

Increased backbone flexibility in threonine45-phosphorylated hirudin upon pH change.

Protein phosphorylation on serine/threonine side chains represents a major regulatory event in the posttranslational control of protein functionality, where it is thought to operate at the level of structural changes in the polypeptide chain. However, key questions about molecular aspects of phosphate ester induced conformational alterations remain open. Among these concerns are the radius of action of the phosphate ester group, its effective ionic state, and its interplay with distinct bonds of the polypeptide chain. Primarily to define short-range effects upon threonine phosphorylation, the native 65 amino acid protein hirudin, conformationally restrained by a proline flanking the pThr(45) site and three intramolecular disulfide bonds, was structurally characterized in both the phosphorylated and the unphosphorylated state in solution. Circular dichroism and hydrogen exchange experiments (MALDI-TOF) showed that structural changes were caused by Thr(45)-Pro(46) phosphorylation only when the phosphate ester group was in its dianionic state. The spatial arrangement of the amino acids, monitored by 1H NMR spectroscopy, appears to be affected within a radius of about 10 A around the pThr(45)-OgammaH, with phosphorylation resulting in a loss of structure and increased flexibility within a segment of at least seven amino acid residues. Thus, the transition from the monoanionic to the dianionic phosphate group over the pH range 5.2-8.5 represents a general phosphorylation-dependent conformational switch operating at physiological pH values.     

Hydrogen-Bond Driven Loop-Closure Kinetics in Unfolded Polypeptide Chains

Characterization of the length dependence of end-to-end loop-closure kinetics in unfolded polypeptide chains provides an understanding of early steps in protein folding. Here, loop-closure in poly-glycine-serine peptides is investigated by combining single-molecule fluorescence spectroscopy with molecular dynamics simulation. For chains containing more than 10 peptide bonds loop-closing rate constants on the 20–100 nanosecond time range exhibit a power-law length dependence. However, this scaling breaks down for shorter peptides, which exhibit slower kinetics arising from a perturbation induced by the dye reporter system used in the experimental setup. The loop-closure kinetics in the longer peptides is found to be determined by the formation of intra-peptide hydrogen bonds and transient β-sheet structure, that accelerate the search for contacts among residues distant in sequence relative to the case of a polypeptide chain in which hydrogen bonds cannot form. Hydrogen-bond-driven polypeptide-chain collapse in unfolded peptides under physiological conditions found here is not only consistent with hierarchical models of protein folding, that highlights the importance of secondary structure formation early in the folding process, but is also shown to speed up the search for productive folding events.     

Using intramolecular disulfide bonds in tau protein to deduce structural features of aggregation-resistant conformations

Because tau aggregation likely plays a role in a number of neurodegenerative diseases, understanding the processes that affect tau aggregation is of considerable importance. One factor that has been shown to influence the aggregation propensity is the oxidation state of the protein itself. Tau protein, which contains two naturally occurring cysteine residues, can form both intermolecular disulfide bonds and intramolecular disulfide bonds. Several studies suggest that intermolecular disulfide bonds can promote tau aggregation in vitro. By contrast, although there are data to suggest that intramolecular disulfide bond formation retards tau aggregation in vitro, the precise mechanism underlying this observation remains unclear. While it has been hypothesized that a single intramolecular disulfide bond in tau leads to compact conformations that cannot form extended structure consistent with tau fibrils, there are few data to support this conjecture. In the present study we generate oxidized forms of the truncation mutant, K18, which contains all four microtubule binding repeats, and isolate the monomeric fraction, which corresponds to K18 monomers that have a single intramolecular disulfide bond. We study the aggregation propensity of the oxidized monomeric fraction and relate these data to an atomistic model of the K18 unfolded ensemble. Our results argue that the main effect of intramolecular disulfide bond formation is to preferentially stabilize conformers within the unfolded ensemble that place the aggregation-prone tau subsequences, PHF6* and PHF6, in conformations that are inconsistent with the formation of cross-β-structure. These data further our understanding of the precise structural features that retard tau aggregation.     

Nanopore-protein interactions dramatically alter stability and yield of the native state in restricted spaces

We have studied the stability and the yield of the folded WW domains in a spherical nanopore to provide insights into the changes in the folding characteristics due to interactions of the polypeptide (SP) with the walls of the pore. Using different models for the interactions between the nanopore and the polypeptide chain we have obtained results that are relevant to a broad range of experiments. (a) In the temperature and the strength of the SP-pore interaction plane (lambda), there are four "phases," namely, the unfolded state, the native state, the molten globule phase (MG), and the surface interaction-stabilized (SIS) state. The MG and SIS states are populated at moderate and large values of lambda, respectively. For a fixed pore size, the folding rates vary non-monotonically as lambda is varied with a maximum at lambda approximately 1 at which the SP-nanopore interaction is comparable to the stability of the native state. At large lambda values, the WW domain is kinetically trapped in the SIS states. Using multiple sequence alignment, we conclude that similar folding mechanism should be observed in other WW domains as well. (b) To mimic the changes in the nature of the allosterically driven SP-GroEL interactions we consider two models for the dynamic Anfinsen cage (DAC). In DAC1, the SP-cavity interaction cycles between hydrophobic (lambda>0) and hydrophilic (lambda=0) with a period tau. The yield of the native state is a maximum for an optimum value of tau=tau(OPT). At tau=tau(OPT), the largest yield of the native state is obtained when tau(H) approximately tau(P) where tau(H)(tau(P)) is the duration for which the cavity is hydrophobic (hydrophilic). Thus, in order to enhance the native state yield, the cycling rate, for a given loading rate of the GroEL nanomachine, should be maximized. In DAC2, the volume of the cavity is doubled (as happens when ATP and GroES bind to GroEL) and the SP-pore interaction simultaneously changes from hydrophobic to hydrophilic. In this case, we find greater increase in yield of the native state compared to DAC1 at all values of tau.     

Role of disulfide bonds in the stability of recombinant manganese peroxidase.

Phanerochaete chrysosporium manganese peroxidase (MnP) [isoenzyme H4] was engineered with additional disulfide bonds to provide structural reinforcement to the proximal and distal calcium-binding sites. This rational protein engineering investigated the effects of multiple disulfide bonds on the stabilization of the enzyme heme environment and oxidase activity. Stabilization of the heme environment was monitored by UV-visible spectroscopy based on the electronic state of the alkaline transition species of ferric and ferrous enzyme. The optical spectral data confirm an alkaline transition to hexacoordinate, low-spin heme species for native and wild-type MnP and show that the location of the engineered disulfide bonds in the protein can have significant effects on the electronic state of the enzyme. The addition of a single disulfide bond in the distal region of MnP resulted in an enzyme that maintained a pentacoordinate, high-spin heme at pH 9.0, whereas MnP with multiple engineered disulfide bonds did not exhibit an increase in stability of the pentacoordinate, high-spin state of the enzyme at alkaline pH. The mutant enzymes were assessed for increased stability by incubation at high pH. In comparison to wild-type MnP, enzymes containing engineered disulfide bonds in the distal and proximal regions of the protein retained greater levels of activity when restored to physiological pH. Additionally, when assayed for oxidase activity at pH 9.0, proteins containing engineered disulfide bonds exhibited slower rates of inactivation than wild-type MnP.     

Engineering disulfide bonds within an antibody

Antibodies have evolved to function in oxidative, extracellular environments. A pair of cysteines in close proximity will oxidatively react to form a disulfide bond that fixes and stabilizes the tertiary structure of a protein. Immunoglobulin G (IgG) includes several disulfide bonds, and the patterns of inter-chain disulfide bonds characterize different IgG sub-classes. Moreover, the Ig-fold domains are characterized by a buried intra-domain disulfide bond, which is important for its structural stability. However, the intra-domain disulfide bond can be replaced without crucial effects on the structure and function, if the domain structure is intrinsically stable or has been stabilized by protein engineering. In previous studies, disulfide bonds were removed by amino-acid substitution indicating that Val and/or Ala (i.e. Ala–Ala, Ala–Val, Val–Ala, and Val–Ala) pairs were preferred for cysteine replacement in the Ig-fold domain. As such, these mutations may be useful for the intracellular use of antibodies. Recently, additional intra-domain disulfide bonds have been shown to stabilize Ig-fold domains and whole IgGs. In heavy chain variable or light chain variable domains, the introduction of additional disulfide bonds into the framework region did not reduce antigen-binding affinity, suggesting that generating disulfide bonds may be a method for stabilizing IgG and antibody fragments, such as the antigen-binding fragment, and single-chain and single-domain antibodies. This article is part of a Special Issue entitled: Recent advances in molecular engineering of antibody.     

Time-resolved small-angle X-ray scattering investigation of the folding dynamics of heme oxygenase: implication of the scaling relationship for the submillisecond intermediates of protein folding

Polypeptide collapse is generally observed as the initial folding dynamics of proteins with more than 100 residues, and is suggested to be caused by the coil-globule transition explained by Flory's theory of polymers. To support the suggestion by establishing a scaling behavior between radius of gyration (Rg) and chain length for the initial folding intermediates, the folding dynamics of heme oxygenase (HO) was characterized by time-resolved, small-angle X-ray scattering. HO is a highly helical protein without disulfide bridges, and is the largest protein (263 residues) characterized by the method. The folding process of HO was found to contain a transient oligomerization; however, the conformation within 10 ms was demonstrated to be monomeric and to possess Rg of 26.1(+/-1.1) A. Together with the corresponding data for proteins with different chain lengths, the seven Rg values demonstrated the scaling relationship to chain length with a scaling exponent of 0.35+/-0.11, which is close to the theoretical value of 1/3 predicted for globules in solutions where monomer-monomer interactions are favored over monomer-solvent interactions (poor solvent). The finding indicated that the initial folding dynamics of proteins bears the signature of the coil-globule transition, and offers a clue to explain the folding mechanisms of proteins with different chain lengths.     

Blocking the tunnel: engineering of Candida rugosa lipase mutants with short chain length specificity

The molecular basis of chain length specificity of Candida rugosa lipase 1 was investigated by molecular modeling and site-directed mutagenesis. The synthetic lip1 gene and the lipase mutants were expressed in Pichia pastoris and assayed for their chain length specificity in single substrate assays using triglycerides as well as in a competitive substrate assay using a randomized oil. Mutation of amino acids at different locations inside the tunnel (P246F, L413F, L410W, L410F/S300E, L410F/S365L) resulted in mutants with a different chain length specificity. Mutants P246F and L413F have a strong preference for short chain lengths whereas substrates longer than C10 are hardly hydrolyzed. Increasing the bulkiness of the amino acid at position 410 led to mutants that show a strong discrimination of chain lengths longer than C14. The results obtained can be explained by a simple mechanical model: the activity for a fatty acid sharply decreases as it becomes long enough to reach the mutated site. In contrast, a mutation at the entrance of the tunnel (L304F) has a strong impact on C4 and C6 substrates. This mutant is nevertheless capable of hydrolyzing chain lengths longer than C8.     

Use of recombinant DNA derived human relaxin to probe the structure of the native protein

This report describes the physical, chemical, and biological characterization of recombinant human relaxin (rhRlx) used as a probe to establish the disulfide pairing in native human relaxin. This strategy is necessary since native human relaxin is only available in the nanogram range. The relaxin molecule is composed of two nonidentical peptide chains, an A-chain 24 amino acids in length and a B-chain of 29 amino acids, linked by two disulfide bridges with an additional disulfide linkage in the A-chain. Native relaxin isolated from human corpora lutea was compared to rhRlx by reversed-phase chromatography, partial sequence analysis, mass spectroscopy, and bioassay. The potency of rhRlx was established by its ability to stimulate cAMP from primary human uterine endometrial cells. Native relaxin isolated from human corpora lutea was equipotent to chemically synthesized relaxin, which in turn was equipotent to rhRlx. A tryptic map was developed for rhRlx to confirm the complete amino acid sequence and assignment of the disulfide bonds. The three disulfide bonds (CysA10-CysA15, CysA11-CysB11, and CysA24-CysB23) were assigned by mass spectrometric analysis of the tryptic peptides and by comparison to chemically synthesized peptides disulfide linked in the two most probable configurations. In addition, the observed amino acid composition and sequence of rhRlx was in agreement with that predicted from the cDNA sequence with the exception that the A-chain amino terminal was pyroglutamic acid. The migration of rhRlx upon sodium dodecyl sulfate-polyacrylamide gel electrophoresis was consistent with a monomeric structure, and the identity of the band was demonstrated by immunoblotting.     

Refolding upon force quench and pathways of mechanical and thermal unfolding of ubiquitin

The refolding from stretched initial conformations of ubiquitin (PDB ID: 1ubq) under the quenched force is studied using the C(alpha)-Gō model and the Langevin dynamics. It is shown that the refolding decouples the collapse and folding kinetics. The force-quench refolding-times scale as tau(F) approximately exp(f(q)Deltax(F)/k(B)T), where f(q) is the quench force and Deltax(F) approximately 0.96 nm is the location of the average transition state along the reaction coordinate given by the end-to-end distance. This value is close to Deltax(F) approximately 0.8 nm obtained from the force-clamp experiments. The mechanical and thermal unfolding pathways are studied and compared with the experimental and all-atom simulation results in detail. The sequencing of thermal unfolding was found to be markedly different from the mechanical one. It is found that fixing the N-terminus of ubiquitin changes its mechanical unfolding pathways much more drastically compared to the case when the C-end is anchored. We obtained the distance between the native state and the transition state Deltax(UF) approximately 0.24 nm, which is in reasonable agreement with the experimental data.     

What can disulfide bonds tell us about protein energetics, function and folding: simulations and bioninformatics analysis

We study the impact of disulfide bonds on protein stability and folding. Using lattice model simulations, we show that formation of a disulfide bond stabilizes a protein to an extent that depends on the distance along the chain between linked cysteine residues. However, the impact of disulfide bonds on folding kinetics varies broadly, from acceleration when disulfides are introduced in or close to the folding nucleus, to slowing when disulfides are introduced outside the nucleus. Having established the effect of disulfide bonds on stability, we study the correlation between the number of disulfide bonds and the composition of certain amino acid classes with the goal to use it as a statistical probe into factors that contribute to stability of proteins. We find that the number of disulfides is negatively correlated with aliphatic hydrophobic but not aromatic content. It is surprising that we observe a strong correlation of disulfide content with polar (Q,S,T,N) amino acid content and a strong negative correlation with charged (E,D,K,R) content. These findings provide insights into factors that determine protein stability and principles of protein design as well as possible relations of disulfide bonds and protein function.     

Thermodynamic and conformational studies on an immunoglobulin light chain which reversibly precipitates at low temperatures.

A lambda light chain, isolated from an immunoglobulin G molecule, was found to reversibly precipitate at low temperatures. This cryoprecipitation was a function of pH, ionic strength, protein concentration, and time as well as temperature. The lambda chain underwent a cooperative conformational change as the temperature was lowered from 26 to 0 degrees C as judged by ultraviolet difference spectroscopy and circular dichroism. Normal lambda chains showed no conformational change. By difference spectroscopy it was possible to calculate the equilibrium constant governing the conformational change. The change was strongly exothermic (delta H approximately -80 kcal mol-1) and accompanied by a large decrease in entropy (delta S approximately -280 eu). The midpoint of the transition was dependent on the initial protein concentration, suggesting that only the noncovalent dimer of the lambda chain exhibited the conformational change. The existence of a monomer-dimer eqiulibrium (KA approximately 4 X 10(5) M-1) was confirmed by sedimentation velocity. No conformational change was observed by circular dichroism at concentrations where greater than 95% of lambda chain was in the form of a monomer. Although high ionic strength inhibited cryoprecipitation, it had no effect on the conformational change. Stabilization of the dimer by forming an interchain disulfide bond between two monomers abolished both the conformational change and cryoprecipitation. A fragment corresponding to the constant region was isolated from both peptic and tryptic digests of the lambda chain. This fragment neither cryoprecipitated nor showed temperature dependence conformational changes. It proved impossible to isolate a fragment corresponding to the variable region. Both qualitative and quantitative models are presented to account for the behavior of the lambda chain at low temperatures.     

The use of n-(9-anthroyloxy) fatty acids to determine fluidity and polarity gradients in phospholipid bilayers

A set of n-(9-anthroyloxy) fatty acid probes (n = 2, 6, 9, 12) have been used to examine gradients in fluorescence polarization, lifetime (tau F), relative quantum yield (phi rel) and positions of emission maxima (lambda max) through bilayers composed of synthetic phospholipids. The fluorophores of these probes report the environment at a graded series of depths from the surface to the centre of the bilayer structure. 1. Polarizations decrease as the fluorophore is moved deeper into the bilayer indicating greater rotational motion of the fluorophore in the hydrocarbon core of the bilayer. 2. The different responses of the probe diphenylhexatriene and the anthroyloxy fatty acids to the action of cholesterol on lipid bilayers are discussed in terms of the orientation of these probes in the bilayer and the types of anisotropic rotational motions which result in depolarization of fluorescence. 3. Stearic acid derivatives which have the fluorophore in the 6-, 9- and 12-positions along the acyl chain have a similar response to solvent polarity as measured by values of lambda max and phi rel in a variety of organic solvents. 4. The position of the emission maximum has little dependence on solvent viscosity, but viscosity does change the degree of vibrational structure seen in the emission spectrum. The vibrational structure itself may be used as an indication of the 'mciroviscosity' gradient in the transverse plane of the bilayer. 5. Values of lambda max, tau F and phi rel indicate that a gradient of polarity exists from the surface to the centre of the bilayer. For dipalmitoyl phosphatidylcholine in the crystalline phase, cholesterol acts to make this polarity gradient shallower.     

Crystal structure of a sweet tasting protein thaumatin I, at 1.65 A resolution.

The crystal structure of thaumatin I, a potently sweet protein isolated from the fruits of the West African shrub, Thaumatococcus danielli Benth, has been refined at a resolution better than 1.65 A using a combination of energy minimization and stereochemically restrained least-squares methods. The final model consists of all 207 amino acids, 28 alternate amino acid conformers and 236 waters, with a crystallographic R-factor of 0.145 for 19,877 reflections having F > 4 sigma F between 10.0 A and 1.65 A (R = 0.167 for all 24,022 reflections). The model has good stereochemistry, with root-mean-square deviations from ideal values for bond and angle distances of 0.014 A and 0.029 A, respectively. The estimated root-mean-square co-ordinate error is 0.15 A. The current model confirms the previously reported 3.1 A C alpha trace in both main chain connectivity and disulfide topology, including two disulfide bonds, that differed from the earlier reported biochemical determination. The structure contains three domains. The core of the molecule consists of an eleven-stranded, flattened beta-sandwich folded into two Greek key motifs. All beta-strands in this sandwich are antiparallel except the parallel N-terminal and the C-terminal strands. The average hydrogen bond length in this sandwich is 2.89 A, with an angle of 155.1 degrees. Two beta-bulges are found in one of the sheets. The second domain consists of two beta-strands forming a beta-ribbon and connected by an omega-loop, and contains a proline residue in cis conformation. This structural motif folds back against the main sandwich to form a smaller sandwich-like structure. The third domain is a disulfide-rich region stretching away from the sandwich portion of the molecule. It contains one alpha-helix and three short helical fragments. Two of the helical segments are connected by an unusually sharp turn, stabilized by a disulfide bridge. One of the three disulfide bonds in this domain takes on two conformations.     

N-terminal fragments of tau inhibit full-length tau polymerization in vitro

The polymerization of the microtubule-associated protein, tau, into insoluble filaments is a common thread in Alzheimer's disease and in a variety of frontotemporal dementias. The conformational change required for tau to transition from an extended monomeric state to a filamentous state with a high beta-sheet content involves the extreme N-terminus coming into contact with distal portions of the molecule; however, these exact interactions are incompletely understood. Here we report that a construct representing amino acids 1-196 (Tau196), which itself does not polymerize, inhibits polymerization of full-length tau (hTau40) in vitro. In addition, we trace the inhibitory effect of Tau196 to amino acids 18-42 of the construct. We also provide evidence that the N-terminal tau fragments require a specific C-terminal region of tau (residues 392-421) to exert their inhibitory effect. The fragments are most effective at inhibiting polymerization when present during the initial 5 min; they remain in the soluble fraction of the polymerization reaction, and they increase the amount of soluble hTau40. The fragments also reduce the number and average length of filaments that are formed. Taken together, these results suggest that the N-terminal tau fragments inhibit hTau40 polymerization by interacting with a specific C-terminal sequence, thereby stabilizing a soluble conformation of tau.     

Binding of the three-repeat domain of tau to phospholipid membranes induces an aggregated-like state of the protein

In patients with Alzheimer's disease, the microtubule-associated protein tau is found aggregated into paired helical filaments (PHFs) in neurofibrillary deposits. In solution, tau is intrinsically unstructured. However, the tubulin binding domain consisting of three or four 31-32 amino acid repeat regions exhibits both helical and β-structure propensity and makes up the proteolysis resistant core of PHFs. Here, we studied the structure and dynamics of the three-repeat domain of tau (i.e. K19) when bound to membranes consisting of a phosphatidylcholine and phosphatidylserine mixture or phosphatidylserine alone. Tau K19 binds to phospholipid vesicles with submicromolar affinity as measured by fluorescence spectroscopy. The interaction is driven by electrostatic forces between the positively charged protein and the phospholipid head groups. The structure of the membrane-bound state of K19 was studied using CD spectroscopy and solid-state magic-angle spinning NMR spectroscopy. To this end, the protein was selectively (13)C-labeled at all valine and leucine residues. Isotropic chemical shift values of tau K19 were consistent with a β-structure. In addition, motionally averaged (1)H-(13)C dipolar couplings indicated a high rigidity of the protein backbone. The structure formation of K19 was also shown to depend on the charge density of the membrane. Phosphatidylserine membranes induced a gain in the α-helix structure along with an immersion of K19 into the phospholipid bilayer as indicated by a reduction of the lipid chain (2)H NMR order parameter. Our results provide structural insights into the membrane-bound state of tau K19 and support a potential role of phospholipid membranes in mediating the physiological and pathological functions of tau.     

Mouse V lambda x gene sequence generates no junctional diversity and is conserved in mammalian species

The lambda x, a new mouse Ig lambda L chain, is produced by rearrangement of the V lambda x, J lambda 2, and C lambda 2 gene segments. The V lambda x amino acid sequence is as divergent to other V lambda as to Vk gene sequences. Additionally, its third hypervariable region (CDR3) is four amino acids longer than those of all other variable gene segments of murine L chain. We have cloned and sequenced the germ-line V lambda x gene and found that the unexpected CDR3 length is encoded by the V lambda x gene. Junctional diversity is prevented by a TAA termination codon localized at the V lambda x 3' extremity. Moreover, we show a striking conservation of the V lambda x sequence in various mammalian species. Portions of the V lambda x sequence display more than 70% of nucleotide sequence identity with rabbit and human variable regions. These results suggest that V lambda x predated the divergence of mammalian species.