Aerobic cometabolic degradation of trichloroethene by methane and ammonia oxidizing microorganisms naturally associated with <Emphasis Type="Italic">Carex comosa</Emphasis> roots

The degradation potential of trichloroethene by the aerobic methane- and ammonia-oxidizing microorganisms naturally associated with wetland plant (Carex comosa) roots was examined in this study. In bench-scale microcosm experiments with washed (soil free) Carex comosa roots, the activity of root-associated methane- and ammonia-oxidizing microorganisms, which were naturally present on the root surface and/or embedded within the roots, was investigated. Significant methane and ammonia oxidation were observed reproducibly in batch reactors with washed roots incubated in growth media, where methane oxidation developed faster (2 weeks) compared to ammonia oxidation (4 weeks) in live microcosms. After enrichment, the methane oxidizers demonstrated their ability to degrade 150 μg l⁻¹ TCE effectively at 1.9 mg l⁻¹ of aqueous CH₄. In contrast, ammonia oxidizers showed a rapid and complete inhibition of ammonia oxidation with 150 μg l⁻¹ TCE at 20 mg l⁻¹ of NH₄ ⁺-N, which may be attributed to greater sensitivity of ammonia oxidizers to TCE or its degradation product. No such inhibitory effect of TCE degradation was detected on methane oxidation at the above experimental conditions. The results presented here suggest that microorganisms associated with wetland plant roots can assist in the natural attenuation of TCE in contaminated aquatic environments.     

Evaluation of the bioremoval of Cr(VI) and TOC in biofilters under continuous operation using response surface methodology

In the present study, the bioremoval of Cr(VI) and the removal of total organic carbon (TOC) were achieved with a system composed by an anaerobic filter and a submerged biofilter with intermittent aeration using a mixed culture of microorganisms originating from contaminated sludge. In the aforementioned biofilters, the concentrations of chromium, carbon, and nitrogen were optimized according to response surface methodology. The initial concentration of Cr(VI) was 137.35 mg l⁻¹, and a bioremoval of 85.23% was attained. The optimal conditions for the removal of TOC were 4 to 8 g l⁻¹ of sodium acetate, >0.8 g l⁻¹ of ammonium chloride and 60 to 100 mg l⁻¹ of Cr(VI). The results revealed that ammonium chloride had the strongest effect on the TOC removal, and 120 mg l⁻¹ of Cr(VI) could be removed after 156 h of operation. Moreover, 100% of the Cr(VI) and the total chromium content of the aerobic reactor output were removed, and TOC removals of 80 and 87% were attained after operating the anaerobic and aerobic reactors for 130 and 142 h, respectively. The concentrations of cells in both reactors remained nearly constant over time. The residence time distribution was obtained to evaluate the flow through the bioreactors.     

Biomass Production with Willow and Poplar Short Rotation Coppices on Sensitive Areas—the Impact on Nitrate Leaching and Groundwater Recharge in a Drinking Water Catchment near Hanover,Germany

In a lowland drinking water catchment area, nitrate leaching as well as groundwater recharge (GWR) was investigated in willow and poplar short rotation coppice (SRC) plantations of different ages, soil preparation measures prior to planting and harvesting intervals. Significantly increased nitrate concentrations of 16.6 ± 1.6 mg NO₃-N L⁻¹ were measured in winter/spring 2010 on a poplar site, established in 2009 after deep plowing (90 cm) but then, subsequently decreased strongly to below 2 mg NO₃-N L⁻¹ in spring 2011. The fallow ground reference plot showed nitrate concentrations consistently below 1 mg L⁻¹ and estimated annual seepage output loss was only 1.36 ± 1.1 kg ha⁻¹ a⁻¹. Leaching loss from a neighboring willow plot from 2005 was 14.3 ± 6.6 kg NO₃-N ha⁻¹ during spring 2010 but decreased to 2.0 ± 1.5 kg NO₃-N ha⁻¹ during the subsequent drainage period. A second willow plot, not harvested since its establishment in 1994, showed continuously higher nitrate concentrations (10.2 ± 1.7 NO₃-N L⁻¹), while a neighboring poplar plot, twice harvested since 1994 showed significantly reduced nitrate concentrations. Water balance simulations, referenced by soil water tension and throughfall measurements, showed that at 655 mm annual rainfall, GWR from the reference plot (300 mm a⁻¹) was reduced by 40 % (to 180 mm a⁻¹) on the 2005 willow stand, mainly due to doubled rainfall interception losses. However, transpiration was limited by low soil water storage capacities, which in turn led to a moderate impact on GWR. We conclude that well-managed SRC on sensitive areas can prevent nitrate leaching, while impacts on GWR may be mitigated by management options.     

Changes in iso- and n-alkane distribution during biodegradation of crude oil under nitrate and sulphate reducing conditions

Crude oil consists of a large number of hydrocarbons with different susceptibility to microbial degradation. The influence of hydrocarbon structure and molecular weight on hydrocarbon biodegradation under anaerobic conditions is not fully explored. In this study oxygen, nitrate and sulphate served as terminal electron acceptors (TEAs) for the microbial degradation of a paraffin-rich crude oil in a freshly contaminated soil. During 185 days of incubation, alkanes from n-C11 to n-C39, three n- to iso-alkane ratios commonly used as weathering indicators and the unresolved complex mixture (UCM) were quantified and statistically analyzed. The use of different TEAs for hydrocarbon degradation resulted in dissimilar degradative patterns for n- and iso-alkanes. While n-alkane biodegradation followed well-established patterns under aerobic conditions, lower molecular weight alkanes were found to be more recalcitrant than mid- to high-molecular weight alkanes under nitrate-reducing conditions. Biodegradation with sulphate as the TEA was most pronounced for long-chain (n-C32 to n-C39) alkanes. The observation of increasing ratios of n-C17 to pristane and of n-C18 to phytane provides first evidence of the preferential degradation of branched over normal alkanes under sulphate reducing conditions. The formation of distinctly different n- and iso-alkane biodegradation fingerprints under different electron accepting conditions may be used to assess the occurrence of specific degradation processes at a contaminated site. The use of n- to iso-alkane ratios for this purpose may require adjustment if applied for anaerobic sites.     

A sequencing batch reactor system for high-level biological nitrogen and phosphorus removal from abattoir wastewater

A sequencing batch reactor (SBR) system is demonstrated to biologically remove nitrogen, phosphorus and chemical oxygen demand (COD) to very low levels from abattoir wastewater. Each 6 h cycle contained three anoxic/anaerobic and aerobic sub-cycles with wastewater fed at the beginning of each anoxic/anaerobic period. The step-feed strategy was applied to avoid high-level build-up of nitrate or nitrite during nitrification, and therefore to facilitate the creation of anaerobic conditions required for biological phosphorus removal. A high degree removal of total phosphorus (>98%), total nitrogen (>97%) and total COD (>95%) was consistently and reliably achieved after a 3-month start-up period. The concentrations of total phosphate and inorganic nitrogen in the effluent were consistently lower than 0.2 mg P l⁻¹ and 8 mg N l⁻¹, respectively. Fluorescence in situ hybridization revealed that the sludge was enriched in Accumulibacter spp. (20–40%), a known polyphosphate accumulating organism, whereas the known glycogen accumulating organisms were almost absent. The SBR received two streams of abattoir wastewater, namely the effluent from a full-scale anaerobic pond (75%) and the effluent from a lab-scale high-rate pre-fermentor (25%), both receiving raw abattoir wastewater as feed. The pond effluent contained approximately 250 mg N l⁻¹ total nitrogen and 40 mg P l⁻¹ of total phosphorus, but relatively low levels of soluble COD (around 500 mg l⁻¹). The high-rate lab-scale pre-fermentor, operated at 37°C and with a sludge retention time of 1 day, proved to be a cheap and effective method for providing supplementary volatile fatty acids allowing for high-degree of biological nutrient removal from abattoir wastewater.     

Biological Remediation of Groundwater Containing Both Nitrate and Atrazine

Due to its high usage, mobility, and recalcitrant nature, atrazine is a common groundwater contaminant. Moreover, groundwaters that are contaminated with atrazine often contain nitrate as well. Nitrate interferes with the biological degradation of atrazine and makes it more difficult to use in situ biological methods to remediate atrazine contaminated groundwater. To solve this problem we used two reactors in sequence as models of in situ biobarriers; the first was a vegetable-oil-based denitrifying biobarrier and the second an aerobic reactor that oxygenated the denitrifying reactor’s effluent. The reactors were inoculated with an atrazine-degrading microbial consortium and supplied with water containing 5 mg l⁻¹ nitrate–N and 3 mg l⁻¹ atrazine. Our hypothesis was that the denitrifying barrier would remove nitrate from the flowing water and that the downstream reaction would remove atrazine. Our hypothesis proved correct; the two reactor system removed 99.9% of the atrazine during the final 30 weeks of the study. The denitrifying barrier removed ~98% of the nitrate and ~30% of the atrazine while the aerobic reactor removed ~70% of the initial atrazine. The system continued to work when the amount of nitrate–N in the influent water was increased to 50 mg l⁻¹. A mercury poisoning study blocked the degradation of atrazine indicating that biological processes were involved. An in situ denitrifying barrier coupled with an air injection system or other oxygenation process might be used to remove both nitrate and atrazine from contaminated groundwater or to protect groundwater from an atrazine spill.     

Anaerobic biodegradation of triphenylmethane dyes in a hybrid UASFB reactor for wastewater remediation

Anaerobic digestions have been proved more successful than aerobic systems for the degradation and destruction of dye-containing wastewaters. The performance of a hybrid up flow anaerobic sludge-filter bed (UASFB) reactor was tested with a synthetic wastewater containing Crystal violet (CV) as a carbon source and sodium acetate as a co-substrate. Continuous feeding of the reactor started with an initial OLR of 0.9 g COD/l-d and then it was increased step wise to 4 g COD l⁻¹ d⁻¹, while maintaining constant HRT (24 h). The optimum pH value and temperature for decolorization of crystal violet by this mixed culture species under anaerobic conditions were found to be 8–9 and 30–35°C respectively. N,N-dimethylaminophenol and N,N-bis (dimethylamino) benzophenone (Michler’s Ketone) were detected as the degradative metabolites of Crystal Violet. Subsequently, N,N-dimethylaminophenol was further degraded to aniline in the reactor whereas Michler’s ketone was not degraded under anaerobic conditions. The UASFB bioreactor was able to remove the CV completely up to a loading rate of 100 mg CV l⁻¹d⁻¹.     

Treatment of phenol in an anaerobic fluidized bed reactor (AFBR): continuous and batch regime

Results of this study describe the feasibility of anaerobic treatment of highly concentrated phenol synthetic wastewater using an anaerobic fluidized bed reactor (AFBR) in both continuous and batch modes. Wastewater with a maximum load of 2,100 mg C·l⁻¹ was prepared using phenol (maximum concentration of 1,600 mg C·l⁻¹) as substrate and a mixture of acetic, propionic and butyric acids (500 mg C·l⁻¹) as co-substrate. AFBR reached total organic carbon (TOC) and phenol removal efficiency over 95% treating the highest organic loading rate (OLR) containing phenol studied for this kind of reactor (5.03 g C·l⁻¹·d⁻¹). The phenol loading rate rise caused volumetric biogas rate increase up to 4.4 l·l⁻¹·d⁻¹ (average yield of 0.28 l CH₄·g⁻¹ COD_removed) as well as variation in the biogas composition; the CO₂ percentage increased while the CH₄ percentage decreased. Morphological examination of the bioparticles at 4.10 g C·l⁻¹·d⁻¹, revealed significant differences in the biofilm structure, microbial colonization and bacterial morphological type development. The five batch assays showed that phenol degradation may be favoured by the presence of volatile fatty acids (VFAs) (co-metabolism), whereas VFAs degradation may be inhibited by phenol. AFBR reached initial phenol degradation velocity of 0.25 mg C·l⁻¹·min⁻¹.     

Effect of fluctuations in salinity on anaerobic biomass and production of soluble microbial products (SMPs)

This study investigated the acclimation potential of batch fed anaerobic biomass with salinities of 0–50 gNaCl l⁻¹. Anaerobic biomass was acclimatized to salinities up to 20 gNaCl l⁻¹over a period of 35 days, with 3 consecutive feedings. After this period the biomass was subjected to non-saline conditions to simulate fluctuating feed compositions. High activity was obtained after the first exposure to non saline conditions for biomass previously exposed to 30 gNaCl l⁻¹. Short exposure (2–48 h) to high salinity (40 gNaCl l⁻¹) did not reduce biomass activity when it was re-subjected to normal conditions. The sensitivity of each anaerobic bacterial group showed that propionate utilisers were the most affected by sudden changes in salinity. Using size exclusion chromatography (SEC) it was found that biomass exposed to concentrations of salinity above 30 gNaCl⁻¹ produced higher molecular weight soluble microbial products (SMPs) which were present in the culture for longer periods than the control indicating that the effluent was more difficult to degrade. With the sudden removal of salinity anaerobic biomass can easily readapt to normal conditions without any high MW compounds being produced. These findings highlight the fact that anaerobic biomass is able to overcome sharp decreases in salinity in contrast with aerobic biomass as reported in the literature.     

Biogeochemical processes in intensive zero-effluent marine fish culture with recirculating aerobic and anaerobic biofilters

The biogeochemical processes that drive nutrient transformations and recycling in organic marine sediment-water environments were studied for 17 months in a zero-effluent intensive recirculating culture system. The system consisted of a 10 m³ gilthead seabream (Sparus aurata) tank coupled to aerobic and anaerobic water treatment elements. Nutrients and alkalinity were measured in the system to quantify the main biogeochemical processes. Fractions of the carbon fed in feed were found in fish (18.3%) and in sludge (11%); the missing carbon was respired by fish (45%) and by aerobic (8.4%) and anaerobic (7.7%) microorganisms. Fractions of the nitrogen fed in feed were found in fish (15.4%) and in sludge (14.3%); the missing nitrogen was eliminated by nitrification-denitrification. Most of the phosphorus and ash fed in feed and not found in fish accumulated within the sludge in the system. The rates of nitrification, denitrification and sulphate reduction increased with time, reaching 0.3 g N m^− 2 d^− 1, 53 g N m^− 2 d^− 1 and 145 g S m^− 2 d^− 1, respectively. Nitrification developed more rapidly than denitrification, leading at first to nitrate accumulation (to 20 mmol NO₃ l^− 1 by day 200) and a decrease in alkalinity. Once denitrification surpassed nitrification, nitrate concentrations decreased, eventually being reduced to < 0.3 mmol NO₃ l^− 1 by day 510, and alkalinity stabilized. Toxic hydrogen sulphide, generated within the anaerobic sludge, was oxidized by oxygen and nitrate as it diffused through the anaerobic-aerobic sediment-water interface. When nitrate levels in the water above the sludge dropped below 2 mmol l^− 1, sulphide was also oxidized in the fluidized bed reactor. Denitrification reduced nitrate in the water, respired (jointly with sulphate reduction) carbon in the sludge, oxidized the hydrogen sulphide, and contributed to stabilization of alkalinity and accumulation of polyphosphate in bacteria as a major sink of labile P.     

Fluoranthene-induced production of ethylene and formation of lysigenous intercellular spaces in pea plants cultivated in vitro

The effect of increasing concentration of polycyclic aromatic hydrocarbon (PAH) fluoranthene (FLT; 0.1, 1 and 5 mg l⁻¹) on the growth, ethylene production and anatomy of stems of 21-day-old pea plants cultivated in vitro in MS medium, with or without FLT, enriched with 0.1 mg l⁻¹ indole-3-acetic acid (IAA) or with combination of 0.1 mg l⁻¹ IAA + 0.1 mg l⁻¹ N⁶-benzyladenine (BA) were investigated. The low concentration of 0.1 mg l⁻¹ FLT, in both IAA- and IAA + BA-treated plants, significantly stimulated the growth of pea callus, while higher concentrations 1 mg l⁻¹ and especially 5 mg l⁻¹ FLT significantly inhibited it. Pea shoots were significantly influenced only after application of 5 mg l⁻¹ FLT in IAA treatment. Significantly increased production of ethylene was found in IAA + BA treatments in all concentrations of FLT, whereas in IAA treatments in 1 and 5 mg l⁻¹ FLT. The lysigenous aerenchyma formation in the cortex of pea stems significantly increased in all FLT treatments and its highest proportion was found in plants exposed to 1 mg l⁻¹ FLT.     

Aerobic biodegradation of nitrobenzene by a defined microbial consortium immobilized in polyurethane foam

An aerobic microbial consortium constructed by the combination of Rhodotorula mucilaginosa Z1, Streptomyces albidoflavus Z2 and Micrococcus luteus Z3 was immobilized in polyurethane foam and its ability to degrade nitrobenzene was investigated. Batch experimental results showed that polyurethane-foam-immobilized cells (PFIC) more efficiently degrade 200–400 mg l⁻¹ nitrobenzene than freely suspended cells (FSC). Kinetics of nitrobenzene degradation by PFIC was well described by the Andrews equation. Compared with FSC, PFIC exhibited better reusability (over 100 times) and tolerated higher shock-loadings of nitrobenzene (1,000 mg l⁻¹). Moreover, In the presence of salinity (≤5% NaCl, w/v), phenol (≤150 mg l⁻¹) and aniline (≤50 mg l⁻¹), respectively, degradation efficiency of nitrobenzene by PFIC reached over 95%. Even in the presence of both 100 mg l⁻¹ phenol and 50 mg l⁻¹ aniline, over 75% nitrobenzene was removed by PFIC in 36 h. Therefore, the immobilization of the defined consortium in polyurethane foam has application potential for removing nitrobenzene in industrial wastewater treatment system.     

Anaerobic transformation of carbon monoxide by microbial communities of Kamchatka hot springs

Carbon monoxide (CO) is one of the common gaseous compounds found in hot volcanic environments. It is known to serve as the growth substrate for a number of thermophilic prokaryotes, both aerobic and anaerobic. The goal of this work was to study the process of anaerobic transformation of CO by microbial communities inhabiting natural thermal environments: hot springs of Uzon Caldera, Kamchatka. The anaerobic microbial community of Treshchinny Spring (80°C, pH 6.5) was found to exhibit two peaks of affinity for CO (K _S1 = 54 nM and K _S2 = 1 μM). The actual rate of anaerobic CO transformation by the microbial community of this spring, calculated after obtaining the concentration dependence curve and extrapolated to the natural concentration of CO dissolved in the hot spring water (20 nM), was found to be 120 μmol l⁻¹ of sediment day⁻¹. In all the hot springs studied, more than 90% of the carbon of ¹⁴CO upon anaerobic incubation was recovered as ¹⁴CO₂. From 1 to 5% of ¹⁴CO was transformed to volatile fatty acids (VFA). The number of microorganisms capable of anaerobic CO oxidation determined by dilution-to-extinction method reached 10⁶ cells ml⁻¹ of sediment. CO-transforming anaerobic thermophilic microorganisms isolated from the springs under study exhibited hydrogenogenic type of CO oxidation and belonged to the bacterial genera Carboxydocella and Dictyoglomus. These data suggest a significant role of hydrogenogenic carboxydotrophic prokaryotes in anaerobic CO transformation in Uzon Caldera hot springs.     

Effect of different carbon sources on the enhanced biological phosphorus removal in a sequencing batch reactor

The effect of the different carbon sources acetate, acetate/glucose or glucose on the enhanced biological phosphorus removal (EBPR) process was studied by experiments under alternating anaerobic–aerobic conditions in one sequencing batch reactor for each carbon source. The glucose was consumed completely within the first 30 min of the anaerobic phase whereas acetate degradation was slow and incomplete. Phosphate was released independently of the carbon source during the whole anaerobic phase. The highest phosphate release (27 mg P l⁻¹) and polyhydroxyalkanoate (PHA) storage (20 mg C g⁻¹ dry matter (DM)) during the anaerobic phase as well as the highest polyphosphate (poly-P) (8 mg P g⁻¹ DM) and glycogen storage (17 mg C g⁻¹ DM) during the aerobic phase were observed with acetate. In contrast to other investigations, glycogen storage did not increase with glucose as substrate but was significantly smaller than with acetate. The PHA composition was also influenced strongly by the carbon source. The polyhydroxyvalerate (PHV) portion of the PHA was maximal 17% for acetate and 82% for glucose. Due to the strong influence of the carbon source on the PHA concentration and composition, PHA storage seems to regulate mainly the phosphate release and uptake. This revised version was published online in July 2006 with corrections to the Cover Date.     

Conversion of oleic acid to 10-hydroxystearic acid by whole cells of <Emphasis Type="Italic">Stenotrophomonas nitritireducens</Emphasis>

The optimal reaction conditions for the conversion of oleic acid to 10-hydroxystearic acid by whole cells of Stenotrophomonas nitritireducens were: pH 7.5, 35°C, 0.05% (w/v) Tween 80, 20 g cells l⁻¹, and 30 g oleic acid l⁻¹ in an anaerobic atmosphere. Under these conditions, the cells produced 31.5 g 10-hydroxystearic acid l⁻¹ over 4 h with a conversion yield of 100% (mol/mol) and a productivity of 7.9 g l⁻¹ h⁻¹, indicating that oleic acid was converted completely to 10-hydroxystearic acid, with no detectable byproduct. This is the highest concentration, productivity, and yield of 10-hydroxystearic acid from oleic acid reported thus far.     

High frequency direct plant regeneration from leaf, internode, and root segments of Eastern Cottonwood (Populus deltoides)

Simple, reproducible, high frequency, improved plant regeneration protocol in Eastern Cottonwood (Populus deltoides) clones, WIMCO199 and L34, has been reported. Initially, aseptic cultures established from axillary buds of nodal segments from mature plus trees on MS liquid medium supplemented with 0.25 mg l⁻¹ KIN and 0.25 mg l⁻¹ IAA. Nodal and internodal segments were found to be extra-prolific over shoot apices during course of aseptic culture establishment, while 0.25 mg l⁻¹ KIN concentration played a stimulatory role in high frequency plant regeneration. Diverse explants, such as various leaf segments, internodes, and roots from in vitro raised cultures, were employed. Direct plant regeneration was at high frequency of 92% in internodes, 88% in leaf segments, and 43% in root segments. This led to the formation of multiple shoot clusters on established culture media with rapid proliferation rates. Many-fold enhanced shoot elongation and growth of the clusters could be achieved on liquid MS medium supplemented with borosilicate glass beads, which offer physical support for proliferating shoots leading to faster growth in comparison to semi-solid agar or direct liquid medium. SEM examination of initial cultures confirmed direct plant regeneration events without intervening calli. In vitro regenerated plants induced roots on half-strength MS medium with 0.15 mg l⁻¹ IAA. Rooted 5- to 6-week-old in vitro regenerated plants were transferred into a transgenic greenhouse in pots containing 1:1 mixture of vermicompost and soil at 27 ± 2°C for hardening and acclimatization. 14- to 15-week-old well-established hardened plants were transplanted to the field and grown to maturity. The mature in vitro raised poplar trees exhibited a high survival rate of 85%; 4-year-old healthy trees attained an average height of 8 m and an average trunk diameter of 25 cm and have performed well under field conditions. The regeneration protocol presented here will be very useful for undertaking genetic manipulation, providing a value addition to Eastern Cottonwood propagation in future.     

In vitro regeneration and morphogenesis studies in common bean

An efficient protocol for high frequency in vitro regeneration of multiple shoots and somatic embryos from the embryonic axis of common bean (Phaseolus vulgaris) was developed. Ten common bean cultivars representing a wide range of diversity among current commercial market classes were used for in vitro regeneration evaluation in our study. These cultivars were tested on 63 different media formulations consisting of combinations of cytokinins, namely benzyladenine (BA) and thidiazuron (TDZ) at concentration levels of 0.0, 1.0, 2.5, 5.0 and 10.0 mg l⁻¹ and auxin, namely naphthalene acetic acid (NAA) and indole-3-acetic acid (IAA) at concentration levels of 0.0, 0.05, 0.1 and 1.0 mg l⁻¹. P. vulgaris cv. Olathe pinto bean performed the best producing over 20 multiple shoots per explant while cv. Condor black bean was the poorest with nine multiple shoots per explant. The optimum media for regeneration of multiple shoots was 4.4 mg l⁻¹ Murashige and Skoog (MS) containing 2.5 mg l⁻¹ BA and 0.1 mg l⁻¹ IAA supplemented with 30 mg l⁻¹ silver nitrate. Adventitious shoots and somatic embryos were regenerated on 4.4 mg l⁻¹ MS medium containing 1 mg l⁻¹ TDZ and 0.05 mg l⁻¹ NAA supplemented with 30 mg l⁻¹ silver nitrate or activated charcoal. Efficient and effective rooting of plantlets was achieved by dipping the cut end base of in vitro regenerated shoots in 1.0 mg l⁻¹ indole-3-butyric acid (IBA) solution and culturing on media containing 4.4 mg l⁻¹ MS supplemented by 0.1 mg l⁻¹ IAA, NAA or IBA.     

Effects of carbon and nitrogen sources on rhamnolipid biosurfactant production by <Emphasis Type="Italic">Pseudomonas nitroreducens</Emphasis> isolated from soil

Rhamnolipid biosurfactant production by Pseudomonas nitroreducens isolated from petroleum-contaminated soil was investigated. The effects of carbon, nitrogen and carbon to nitrogen ratio on biosurfactant production were examined using mineral salts medium as the growth medium. The tenso-active properties (surface activity and critical micelle concentrations of the produced biosurfactant were also evaluated. The best carbon source, nitrogen source were glucose and sodium nitrate giving rhamnolipid yields of 5.28 and 4.38 g l⁻¹, respectively. The maximum rhamnolipid production of 5.46 g l⁻¹ was at C/N (glucose/sodium nitrate) of 22. The rhamnolipid biosurfactant reduced the surface tension of water from 72 to ~37 mN/m. It also has critical micelle concentration of ~28 mg l⁻¹. Thus, the results presented in our reports show that the produced rhamnolipid can find wide applications in various bioremediation activities such as enhanced oil recovery and petroleum degradation.     

Role of ethylene and jasmonic acid on rhizome induction and growth in rhubarb (<Emphasis Type="Italic">Rheum rhabarbarum</Emphasis> L.)

Experiments were conducted to elucidate the hormonal induction and regulation of rhizome growth in rhubarb (Rheum rhabarbarum L.). It was found that ethylene is the key regulator of rhizome induction and development. The role of jasmonic acid (JA) and its interaction with ethylene in rhizome induction and growth were also examined. Both ethylene and JA have a significant effect on promoting rhizome formation in vitro. Conversely, the ethylene biosynthesis inhibitor aminoethoxyvinylglycine (AVG) (1.5 μM) inhibited rhizome induction in multiple-shoot clumps in vitro, and suppressed the stimulatory effects of exogenously applied ethephon (1 mg l⁻¹) and JA (10 ng l⁻¹) in promoting mini-rhizome formation, further confirming the role of endogenous ethylene in the process. In addition, rhizome growth was significantly enhanced in the presence of both ethylene and JA (ethephon 1 mg l⁻¹ and JA 10 ng l⁻¹) compared to JA alone. These results suggest that endogenous ethylene is the key regulator of rhizome growth in rhubarb and JA promotes rhizome formation, possibly through inducing endogenous ethylene synthesis.     

Biodegradation of 2,4-dichlorophenol by a <Emphasis Type="Italic">Bacillus</Emphasis> consortium

As part of our effort at establishing microbial consortia of relevance for the bioremediation of xenobiotics polluted environments in Mexico, we assessed the aerobic biodegradation of 2,4-dichlorophenol (2,4-DCP) by a consortium of four Bacillus species that were isolated from a polluted soil by enrichment using a mixture of chlorophenols. The bacterial consortium effectively biodegraded 2-chlorophenol, 3-chlorophenol and 2,4-dichlorophenol at degradation rates of between 1.7 and 6.7 μmoles l⁻¹ h⁻¹. In the presence of NH₄Cl or KNO₂ as nitrogen sources_, 2,4-DCP was variously degraded. Under both conditions, cell biomass attained highest values of 350 and 450 mg l⁻¹ respectively, while the amounts of 2,4-DCP metabolized in 21 days reached peak values of 2.1 and 2.5 mM representing between 70 and 85% degradation respectively. Chloride releases during the same period were highest at 4.7 mM and 5.3 mM in the presence of the two nitrogen sources. The presence of free-chloride in the culture medium had a significant impact on the catabolism of 2,4-dichlorophenol.