Improvement and optimization of two engineered phage resistance mechanisms in Lactococcus lactis

Homologous replication module genes were identified for four P335 type phages. DNA sequence analysis revealed that all four phages exhibited more than 90% DNA homology for at least two genes, designated rep2009 and orf17. One of these genes, rep2009, codes for a putative replisome organizer protein and contains an assumed origin of phage DNA replication (ori2009), which was identical for all four phages. DNA fragments representing the ori2009 sequence confer a phage-encoded resistance (Per) phenotype on lactococcal hosts when they are supplied on a high-copy-number vector. Furthermore, cloning multiple copies of the ori2009 sequence was found to increase the effectiveness of the Per phenotype conferred. A number of antisense plasmids targeting specific genes of the replication module were constructed. Two separate plasmids targeting rep2009 and orf17 were found to efficiently inhibit proliferation of all four phages by interfering with intracellular phage DNA replication. These results represent two highly effective strategies for inhibiting bacteriophage proliferation, and they also identify a novel gene, orf17, which appears to be important for phage DNA replication. Furthermore, these results indicate that although the actual mechanisms of DNA replication are very similar, if not identical, for all four phages, expression of the replication genes is significantly different in each case.     

Characterization of bacteriophage lambda reverse as an Escherichia coli phage carrying a unique set of host-derived recombination functions

λ reverse (λrev) (Zissler et al., 1971a) is a recombination proficient derivative of a A phage which had lost the phage recombination genes by deletion. In this work, phages with the Rev phenotype have been obtained by a method of selection different from that of Zissler et al. (1971a). Comparison of DNA from two of our isolates and one of Zissler's by electron microscopic heteroduplex mapping shows that all three phages carry substitutions of non-λ DNA which are indistinguishable in extent, location and base sequence. Genetic and biochemical characterization of λrev strongly suggests that the substituted DNA codes for recombination functions different from the λ recombination functions which are deleted. These substituted genes apparently derive from the host chromosome or a prophage, and may be the same as the genes responsible for the SbcA and Rac phenotypes in the host.     

Molecular characterization of the minimal replicon and the unidirectional theta replication of pSCM201 in extremely halophilic archaea

A 3,463-bp plasmid, pSCM201, was isolated from a halophilic archaeon, Haloarcula sp. strain AS7094. The minimal replicon that is essential and sufficient for autonomous replication and stable maintenance in Haloarcula hispanica was determined by deletion analysis of the plasmid. This minimal replicon ( approximately 1.8 kb) consisted of only two functionally related segments: (i) a putative origin (ori201) containing an AT-rich region and sets of repeats and (ii) an adjacent gene encoding a putative replication initiation protein (Rep201). Electron microscopic observation and Southern blotting analysis demonstrated that pSCM201 replicates via a theta mechanism. Precise mapping of the putative origin suggested that the replication initiated from a fixed site close to the AT-rich region and proceeded unidirectionally toward the downstream rep201 gene, which was further confirmed by electron microscopic analysis of the ClaI-digested replication intermediates. To our knowledge, this is the first unidirectional theta replication plasmid experimentally identified in the domain of archaea. It provides a novel plasmid system to conduct research on archaeal DNA replication.     

Sequence organization of the origins of DNA replication in lambdoid coliphages

We have determined the sequences of the ori region DNA of several phage lambda mutants and hybrids, which shed light on the mechanism of DNA replication in the lambdoid phages. These include the heterologous substitution hybrids lambda rep82:lambda and lambda rep80:lambda, a pseudorevertant of the ori-r93 mutant lambda r93hot5, and the insertion mutant lambda pk35. The ori regions of the three lambdoid phages, lambda, phi 80 and 82, all have repeated sequences, termed iterons, and A . T-rich zones. We note that a similar arrangement of DNA is also found in several other prokaryotic origins of replication. lambda and phi 80 have four iterons, and 82 has five. The origin of lambda r93hot5 is unusual in that contains only three iterons, yet the phage grows normally. Analysis of this mutant indicates that the spacing of iterons is crucial to ori function, whereas their number is not. This argues against the cloverleaf model for lambda ori structure (Hobom et al., 1979). In lambda pk35 the drug resistance element Tn903 is inserted into the "inceptor" (ice) site, proposed to be crucial for lambda replication initiation (Hobom et al., 1979); yet this phage grows normally.     

The mitochondrial nucleoid protein, Mgm101p, of Saccharomyces cerevisiae is involved in the maintenance of rho(+) and ori/rep-devoid petite genomes but is not required for hypersuppressive rho(-) mtDNA

The Saccharomyces cerevisiae MGM101 gene encodes a DNA-binding protein targeted to mitochondrial nucleoids. MGM101 is essential for maintenance of a functional rho(+) genome because meiotic segregants, with a disrupted mgm101 allele, cannot undergo more than 10 divisions on glycerol medium. Quantitative analysis of mtDNA copy number in a rho(+) strain carrying a temperature-sensitive allele, mgm101-1, revealed that the amount of mtDNA is halved each cell division upon a shift to the restrictive temperature. These data suggest that mtDNA replication is rapidly blocked in cells lacking MGM101. However, a small proportion of meiotic segregants, disrupted in MGM101, have rho(-) genomes that are stably maintained. Interestingly, all surviving rho(-) mtDNAs contain an ori/rep sequence. Disruption of MGM101 in hypersuppressive (HS) strains does not have a significant effect on the propagation of HS rho(-) mtDNA. However, in petites lacking an ori/rep, disruption of MGM101 leads to either a complete loss or a dramatically decreased stability of mtDNA. This discriminatory effect of MGM101 suggests that replication of rho(+) and ori/rep-devoid rho(-) mtDNAs is carried out by the same process. By contrast, the persistence of ori/rep-containing mtDNA in HS petites lacking MGM101 identifies a distinct replication pathway. The alternative mtDNA replication mechanism provided by ori/rep is independent of mitochondrial RNA polymerase encoded by RPO41 as a HS rho(-) genome is stably maintained in a mgm101, rpo41 double mutant.     

Genes and regulatory sequences of bacteriophage phi X174

Fragments of the DNA of bacteriophage phi X174 were inserted in the plasmids pACYC177 and pBR322, in order to test the in vivo effects of separate phage genes and regulatory sequences. The phi X174 inserts were identified by recombination and complementation with phage mutants, followed by restriction enzyme analysis. The genes B, C, F and G can be maintained stably in the cell even when there is efficient expression of these viral genes. Recombinant plasmids with the complete genes D and E can only be maintained when the expression of these genes is completely blocked. Expression of complete H and J genes could not yet be demonstrated. The intact gene A was apparently lethal for the host cell, as it was never found in the recombinants. The genes F and G are expressed, even when they are not preceded by one of the well characterized viral or plasmid promoter sequences. Screening of the nucleotide sequence of phi X174 gives two promoter-like sequences just in front of the two genes. Viral sequences with replication signals (the phi X174 (+) origin of replication, the initiation site for complementary strand synthesis and the incompatibility sequence) appeared to be functional also when inserted in recombinant plasmids. A plasmid with the phi X (+) origin can be forced to a rolling circle mode of replication. The A protein produced by infecting phages works in trans on the cloned viral origin. The (-) origin can function as initiation signal for complementary strand synthesis during transduction of single-stranded plasmid DNA. The intracellular presence of the incompatibility sequence on a plasmid prevents propagation of infecting phages.     

The localized melting of mini-F origin by the combined action of the mini-F initiator protein (RepE) and HU and DnaA of Escherichia coli

Replication of mini-F plasmids requires the initiator protein RepE, which binds specifically to four iterons within the origin (ori2), as well as some host factors that are involved in chromosomal DNA replication. To understand the role of host factors and RepE in the early steps of mini-F DNA replication, we examined the effects of RepE and the Escherichia coli proteins DnaA and HU on the localized melting of ori2 DNA in a purified in vitro system. We found that the binding of RepE to an iteron causes a 50^° bend at or around the site of binding. RepE and HU exhibited synergistic effects on the localized melting within the ori2 region, as detected by sensitivity to the single-strand specific P1 endonuclease. This opening of duplex DNA occurred around the 13mer of ori2, whose sequence closely resembles the set of 13mers found in the chromosomal origin oriC. Further addition of DnaA to the reaction mixture increased the efficiency of melting and appeared to extend melting to the adjacent AT-rich region. Moreover, DNA melting with appreciably higher efficiencies was observed with mutant forms of RepE that were previously shown to be hyperactive both in DNA binding in vitro and in initiator activity in vivo. We propose that the binding of RepE to four iterons of ori2 causes bending at the sites of RepE binding and, with the assistance of HU, induces a localized melting in the 13mer region. The addition of DnaA extends melting to the AT-rich region, which could then serve as the entry site for the DnaB-DnaC complex, much as has been documented for oriC- dependent replication.     

The integration host factor of Escherichia coli binds to bent DNA at the origin of replication of the plasmid pSC101

The integration host factor (IHF) of Escherichia coli is necessary for maintenance of pSC101. The protein binds specifically to the replication origin of the plasmid, in the AT-rich region located immediately adjacent to the left, weak binding site for the plasmid-encoded initiator protein. DNAase I and OH- radical footprinting experiments showed that IHF protects 49 bp of the DNA at the origin region. Methylation protection analyses revealed that IHF contacts purine residues in both the major and minor grooves of the DNA. Electrophoretic analyses showed that IHF binds to bent DNA, and the protein binding further enhances the degree of DNA bending. Site-directed mutagenesis of three of the contact points not only abolished binding of the protein to the DNA but also inactivated the replication origin. Therefore, binding of IHF to the ori sequence most probably is necessary for initiation of plasmid replication.     

Two enhancer elements for DNA replication of pSC101, par and a palindromic binding sequence of the Rep protein.

The minimal replication origin (ori) of the plasmid pSC101 has been previously defined as an approximately 220-bp region by using plasmids defective in the par region, which is a cis-acting determinant of plasmid stability. This ori region contains the DnaA binding sequence, three repeated sequences (iterons), and an inverted repeat (IR) element (IR-1), one of the binding sites of an initiator protein, Rep (or RepA). In the present study, we show that plasmids containing par can replicate at a nearly normal copy number in the absence of IR-1 but still require a region (the downstream region) between the third iteron and IR-1. Because par is dispensable in plasmids retaining IR-1, par and IR-1 can compensate each other for efficient replication. The region from the DnaA box to the downstream region can support DNA replication at a reduced frequency, and it is designated "core-ori." Addition of either IR-1 or par to core-ori increases the copy number of the plasmid up to a nearly normal level. However, the IR-1 element must be located downstream of the third iteron (or upstream of the rep gene) to enhance replication of the plasmid, while the par region, to which DNA gyrase can bind, functions optimally regardless of its location. Furthermore, the enhancer activity of IR-1 is dependent on the helical phase of the DNA double helix, suggesting that the Rep protein bound to IR-1 stimulates the activation of ori via its interaction with another factor or factors capable of binding to individual loci within ori.     

The PagN protein mediates invasion via interaction with proteoglycan

Streptomyces linear plasmids start replication at centrally located loci, usually consisting of iterons and adjacent rep genes. Here, we identified four new replication loci from Streptomyces linear plasmids. A discontinuous locus, consisting of two genes and iterons separated by two nonessential genes, was required for replication of pRL2 in both linear and circular modes. A temperature-sensitive plasmid, pRL4, contained a replication locus, a noncoding sequence and a SAP1.35 -like gene. A telomere-adjacent locus, another noncoding sequence and SAP1.1 -like gene, was identified for replication of the large plasmid pFRL2. The replication locus of pSHK1 consisted of SCP1- rep -like genes and iterons. These results indicate an unexpected variety of components, positions and combinations of replication loci among Streptomyces linear plasmids.     

Expression of the phage λ recombination genes exo and bet under lacPO control on a multi-copy plasmid

The bacteriophage λ genes exo and bet, whose products (λ exonuclease and β protein, respectively; Red phenotype) mediate homologous recombination of λ phages, have been cloned under lacPOlacI^q control on multi-copy plasmids. Induction of recA3 cells harboring these plasmids with isopropylthiogalactoside (IPTG) resulted in λ exonuclease levels (assayed in vitro) that were proportional to the time of induction (for at least 4 h); recombination of λ Red^? phages in vivo was similarly inducible. Only one out of 25 bet^Δ plasmids (constructed by a variety of in vitro techniques) expressed λ exonuclease, a result consistent with the polarity of several known phage bet mutations. A general method for transferring phage exo and bet mutations to plasmids was devised and plasmids bearing polar (bet3) and nonpolar (bet113) mutations were constructed. Mutant derivatives of the plasmid showed the same complementation pattern as analogous phage red mutants. When λbet3 phages (Exo^?Bet^?) infected IPTG-induced recA3 bacteria containing exo⁺bet⁺ plasmids, recombination frequencies were no more than twice those typical for infection of plasmid-free recA3 cells with exo⁺bet⁺ phages, even in the case of IPTG induction sufficient to elevate the production of λ exonuclease about 100-fold. Even when plasmid induction was delayed till as late as 50 min after infection, recombination was significant. Preliminary experiments suggest that these plasmids encode a polypeptide with Gam activity that corresponds to the 98-amino acid “shorter” open reading frame assigned to gam by Sanger et al.     

The localized melting of mini-F origin by the combined action of the mini-F initiator protein (RepE) and HU and DnaA of Escherichia coli

 Replication of mini-F plasmids requires the initiator protein RepE, which binds specifically to four iterons within the origin (ori2), as well as some host factors that are involved in chromosomal DNA replication. To understand the role of host factors and RepE in the early steps of mini-F DNA replication, we examined the effects of RepE and the Escherichia coli proteins DnaA and HU on the localized melting of ori2 DNA in a purified in vitro system. We found that the binding of RepE to an iteron causes a 50^° bend at or around the site of binding. RepE and HU exhibited synergistic effects on the localized melting within the ori2 region, as detected by sensitivity to the single-strand specific P1 endonuclease. This opening of duplex DNA occurred around the 13mer of ori2, whose sequence closely resembles the set of 13mers found in the chromosomal origin oriC. Further addition of DnaA to the reaction mixture increased the efficiency of melting and appeared to extend melting to the adjacent AT-rich region. Moreover, DNA melting with appreciably higher efficiencies was observed with mutant forms of RepE that were previously shown to be hyperactive both in DNA binding in vitro and in initiator activity in vivo. We propose that the binding of RepE to four iterons of ori2 causes bending at the sites of RepE binding and, with the assistance of HU, induces a localized melting in the 13mer region. The addition of DnaA extends melting to the AT-rich region, which could then serve as the entry site for the DnaB-DnaC complex, much as has been documented for oriC- dependent replication. Received: 15 May 1996/Accepted: 11 July 1996