Langrnuir-Blodgett膜的研究现状及其应用

Langmuir-Blodgett膜(简称LB膜)技术在20世纪30年代掀起了第一个研究单分子膜的高潮,自此,以后它一直受到各国科研人员的青睐,是当前膜与细胞生物物理的前沿热点问题.我国自从80年代开展LB膜的科研工作至今,对单分子膜和LB膜工作起到了重要的推动作用.本文将从目前研究LB膜的一些手段以及该领域的部分研究成果入手,揭示LB膜的研究现状.并阐述LB膜在化学、生物学、物理学、医学等方面上的应用情况以及对未来应用前景的展望.     

细胞膜表面单分子事件的实时观察

单分子实时检测以高分辨率显微镜及纳米操作技术为支撑,实现在微观世界单分子水平探索和阐明生命现象的本质,进而展现生命科学的全景。本文综述了近年来单分子成像和检测领域的技术进展,以及将这些技术和创新方法在活细胞膜表面单分子事件研究中的应用,如蛋白质扩散、蛋白折叠动力学、膜受体装配及近膜区囊泡运动等。     

胆固醇对金属离子磷脂酰甘油单分子膜成膜的影响

目的：本文主要研究不同条件胆固醇（Cholesterol,简称Chol）和金属离子（钾、镁离子）对磷脂酰甘油（Phosphatidylglycerols,简称PG）相互作用后形成的单分子膜的影响。方法：首先以金属离子作为亚相,研究胆固醇的量对磷脂酰甘油单分子膜的影响;其次加入同等量的胆固醇量,亚相为不同金属离子时,对磷脂酰甘油单分子膜的影响,最后分析磷脂酰甘油LB膜的π-A曲线,即曲线外扩、相变点、膜压等等变化特征。结果：随着胆固醇的增多,金属离子磷脂酰甘油单分子膜形成π-A曲线变化逐渐明显;当加入同等量的胆固醇时,随着金属离子价态的逐渐增高,磷脂酰甘油单分子膜形成的π-A曲线的变化也逐渐明显。结论：其一：胆固醇对金属离子磷脂酰甘油单分子膜成膜质量是有影响的。其二,金属离子对胆固醇与磷脂酰甘油混合形成的单分子膜同样也是有的影响。     

气/液界面及固体表面硬脂酸LB膜结构性质研究

对气液/和固/液界面上硬脂酸LB膜的结构性质的研究表明,二价离子能够使气/液界面上LB膜表面压力降低,并出现一个固-固转变的过程.对此可以解释为是由二价离子富集在亚相表面,减弱了膜分子之间的库仑作用,使表面电势降低引起的.同时由于二价离子与硬脂酸分子形成复合物,单层膜的结构发生改变,导致固-固转变点的产生.对固体基质上多层LB膜的椭圆偏振研究表明,有序排列的硬脂酸LB膜具有明显的双折射性质.电镜观察发现两个固相垂直提位获得的多层膜在形貌上存在差异,低压固相膜较之高压固相膜存在明显的不均匀性.分析认为这是在膜从气/液界面向固体表面转移过程中发生重结晶引起的.     

气/液界面及固体表面硬脂酸LB膜结构性质研究

对气液/和固/液界面上硬脂酸LB膜的结构性质的研究表明,二价离子能够使气/液界面上LB膜表面压力降低,并出现一个固-固转变的过程.对此可以解释为是由二价离子富集在亚相表面,减弱了膜分子之间的库仑作用,使表面电势降低引起的.同时由于二价离子与硬脂酸分子形成复合物,单层膜的结构发生改变,导致固-固转变点的产生.对固体基质上多层LB膜的椭圆偏振研究表明,有序排列的硬脂酸LB膜具有明显的双折射性质.电镜观察发现两个固相垂直提位获得的多层膜在形貌上存在差异,低压固相膜较之高压固相膜存在明显的不均匀性.分析认为这是在膜从气/液界面向固体表面转移过程中发生重结晶引起的.     

朗缪尔——布洛奇特薄膜在生物学和医学上的应用

具有双嗜性(嗜水和嗜油)的有机分子可以在水面展成悬浮的单分子层。用一块经适当处理的固体衬底连续地插入和取出水面,可以将这种单分子层顺序转移到衬底表面,形成分子规则排列的单层膜和多层膜,这就是朗缪尔——布洛奇特薄膜(简称LB薄膜)。LB薄膜致密、均匀、膜厚精确可控在数埃水平。同时,作为一种分子层可控的准晶态薄膜.它有可能实现人们梦寐以求的控制分子排列的愿望。长期以来,人们靠化学     

LB膜及其在生物学中的应用

§1 前言 虽然Langmuir Blodgett膜(LB膜)的发展历史很悠久,但直到本世纪70年代,人们才开始认识到它在基础和应用科学研究上的重要价值。LB膜所具有的厚度和层数的精确,可在分子水平上控制其结构和组成的性质,奠定了它在薄膜技术领域的重要地位。目前,LB膜技术在物理学,化学,电子学及生物学等领域都有着广泛的应用。     

用于金刚石表面单分子有序固定的DNA折纸制备

近年来兴起的以金刚石氮-空位(NV)色心为量子传感器的微观磁共振技术得到快速发展,已经实现单个生物分子磁共振谱的探测,正在向单分子结构和功能的研究推进.这其中需要解决一个重要的技术问题,即单分子在金刚石表面的有序分散和固定. DNA的自组装为解决这一问题提供了可行途径,本文使用DNA折纸技术,制备了一种60 nm边长的正方形双层DNA折纸作为单分子载体,并与金刚石表面结合.首先采用双层结构提高了DNA折纸的稳定性,其次通过在DNA折纸边缘添加发卡结构减少了DNA折纸结构间的聚团,最终成功将DNA折纸装配到金刚石表面.通过原子力显微镜图像进行表征显示其结构完整、分散均匀.本工作为后续的单分子磁共振技术在单分子生物物理领域的应用推广奠定了样品制备的基础.     

铜绿假单胞菌蹭行运动单细胞分析方法的建立及应用

蹭行运动在生物被膜形成过程中对细菌适应表面环境以及后续生物被膜三维结构的形成起重要作用。因此,对蹭行运动的原位表征、量化是生物被膜研究中的重要科学问题之一。我们通过高通量数据采集、自动化图像处理、数据库建立以及图形化输出等技术手段,建立了一整套基于单细菌的统计分析方法。利用这一方法对蹭行运动中的行走、弹射过程进行了详细分析,发现弹射运动过程中存在以0.9 s为周期的周期性弛豫。并定量比较了群体感知信号分子对蹭行运动的影响,发现加入信号分子后蹭行运动在高速区明显增强。该方法的建立为后续蹭行运动分子机制以及调节方式的研究奠定了基础。     

脂质体与磷脂单分子层相互作用的研究

本文尝试通过脂质体与磷脂单分子层(LB膜)相互作用去研究与膜间作用有关的问题。实验结果表明,脂质体的尺度、相状态,脂质体与LB膜的表面电荷性质,均对脂质体向LB膜的转变率有显著影响。本文尝试的方法有可能为人工膜研究膜间作用问题提供一条新的途径。     

Optical organophosphorus biosensor consisting of acetylcholinesterase/viologen hetero Langmuir–Blodgett film

The fiber-optic biosensor consisting of an acetylcholinesterase (AChE)-immobilized Langmuir–Blodegtt (LB) film was developed to detect organophosphorus compounds in contaminated water. The sensing scheme was based on the decrease of yellow product, o-nitrophenol, from a colorless substrate, o-nitrophenyl acetate, due to the inhibition by organophosphorus compounds on AChE. Absorbance change of the product as the output of enzyme reaction was detected and the light was guided through the optical fibers. The enzyme portion of the sensor system was fabricated by the LB technique for formation of the enzyme film. AChE-immobilized LB film was formed by adsorbing the enzyme molecules onto a viologen monolayer using the electrostatic force. The proposed kinetics for irreversible inhibition of organophosphorus compounds on AChE agreed well with the experimental data. The surface topography of AChE-immobilized LB film was investigated by atomic force microscope (AFM). The immobilized AChE had the maximum activity at pH 7. The proposed biosensor could successfully detect the organophosphorus compounds upto 2 ppm and the response time to steady signal of the sensor was about 10 min.     

Langmuir and Langmuir-Blodgett films of organophosphorus acid anhydrolase

In this paper, we describe the preparation and characterization of Langmuir and Langmuir-Blodgett (LB) monolayers of the enzyme organophosphorus acid anhydrolase (OPAA). Langmuir films of OPAA were characterized on different subphases, such as phosphate, ammonium carbonate, and bis-tris-propane buffers. Monolayers at the air-water interface were characterized by measuring the surface pressure and surface potential-area isotherms. In situ UV-vis absorption spectra were also recorded from the Langmuir monolayers. The enzyme activity at the air-water interface was tested by the addition of diisopropylfluorophosphate (DFP) to the subphase. LB films of OPAA were transferred to mica substrates to be studied by atomic force microscopy. Finally, a one-layer LB film of OPAA labeled with a fluorescent probe, fluorescein isothiocyanate (FITC), was deposited onto a quartz slide to be tested as sensor for DFP. The clear, pronounced response and the stability of the LB film as a DFP sensor show the potential of this system as a biosensor.     

In Situ μGISAXS: II. Thaumatin Crystal Growth Kinetic

The formation of thaumatin crystals by Langmuir-Blodgett (LB) film nanotemplates was studied by the hanging-drop technique in a flow-through cell by synchrotron radiation micrograzing-incidence small-angle x-ray scattering. The kinetics of crystallization was measured directly on the interface of the LB film crystallization nanotemplate. The evolution of the micrograzing-incidence small-angle x-ray scattering patterns suggests that the increase in intensity in the Yoneda region is due to protein incorporation into the LB film. The intensity variation suggests several steps, which were modeled by system dynamics based on first-order differential equations. The kinetic data can be described by two processes that take place on the LB film, a first, fast, process, attributed to the crystal growth and its detachment from the LB film, and a second, slower process, attributed to an unordered association and conversion of protein on the LB film.     

Fabrication and structural characterization of the Langmuir–Blodgett films from a new chitosan derivative containing cinnamate chromophores

A new amphiphilic chitosan derivative, octanoylchitosan cinnamate (OCC) was synthesized through regioselective modifications of chitosan. A solution of OCC was spread to water to form a stable monolayer at the air/water interface. The surface pressure (π)–area (A) isotherm indicated that the polymer had a limiting area of about 100 Å² per repeat unit. YZ-type multilayers were deposited onto hydrophobic substrates through Langmuir–Blodgett (LB) technique. The structural features of the LB films were investigated by UV absorption, circular dichroism (CD) and linear dichroism (LD) spectroscopy. The results showed that the intrinsic chirality originating from the helical order of the OCC backbones was maintained in the LB films. Besides, the polymer backbones were uni-axially oriented in the LB film. The ordered structures of OCC assembled in a dilute solution and in a cast film were also investigated and the results were compared with that of the LB film.     

Orientation of silk III at the air-water interface.

A threefold helical crystal structure of Bombyx mori silk fibroin has been observed in films prepared from aqueous silk fibroin solutions using the Langmuir Blodgett (LB) technique. The films were studied using a combination of transmission electron microscopy and electron diffraction techniques. Films prepared at a surface pressure of 16.7 mN/m have a uniaxially oriented crystalline texture, with the helical axis oriented perpendicular to the plane of the LB film. Films obtained from the air-water interface without compression have a different orientation, with the helical axes lying roughly in the plane of the film. In both cases the d-spacings observed in electron diffraction are the same and match a threefold helical model crystal structure, silk III, described in previous publications. Differences in the relative intensities of the observed reflections in both types of oriented samples, as compared to unoriented samples, allows estimations of orientation distributions and the calculations of orientation parameters. The orientation of the fibroin chain axis in the plane of the interfacial film for uncompressed samples is consistent with the amphiphilic behavior previously postulated to drive the formation of the threefold helical silk III conformation.     

Conformation and molecular and ionic transformations of polycytidylic acid immobilized in multilayer Langmuir and polyelectrolyte films

Multilayer films of complexes of polycytidylic acid with dioctadecyldimetylammonium were obtained by the Langmuir-Blodgett method (LB films), and complexes of poly(C) with polycations (poly-L-lysisne, polyethyleneimine, polyallylamine) were obtained by the method of alternate adsorption (polyionic assembly) from solutions of oppositely charged polyelectrolytes on the solid carrier (SA films). It was shown that poly(C) exists in SA films in a single-stranded state irrespective of whether in the starting solution it occurred in the single-stranded nonprotonated or double-stranded protonated conformation. Conversely, in the LB film poly(C) preferred to be in a double protonated conformation. UV-spectra of water-insoluble LB and SA films at different pH values of surrounding water medium were investigated. Proton titration curves of poly(C) immobilized in LB films were obtained. The analysis of the shape of titration curves showed that the molecular-ionic transformation of poly(C) in LB films is accompanied by both the conformational transition of the polynucleotide and the molecular rearrangement in the whole film. Poly(C) was found to transform from the double- to single-stranded state and vice versa in the "deprotonation-protonation" cycle of LB film due to cooperative release/binding of hydrogen ions by cytosine bases. In contrast, poly(C) "protonation-deprotonation" in SA films occurred without conformational transitions of the polynucleotide. As opposed to poly(C) in solution a rather big hysteresis of forward and back titration curves was found for both types of multilayer films, indicating molecular rearrangements in films. The reason for the structural transformations of poly(C) upon fabrication of LB or SA films and the mechanism of molecular ionic transformations of poly(C) in films are discussed in terms of a simple model of ion exchange. An assumption about the nature of structural transformations of LB and SA films during their protonation-deprotonation is put forward.     

Fabrication of protein a-viologen hetero Langmuir-Blodgett film for fluorescence immunoassay

Protein A molecular thin film was fabricated as a platform of antibody-based biosensor. For the immobilization of the protein A thin film, a viologen multilayer was built up using the Langmuir-Blodgett (LB) technique, and then, protein A was adsorbed on the viologen LB film by an electrostatic interaction force, which was formed as a hetero-film structure. For the deposition of viologen, surface pressure area (π-A) isotherm was investigated. The fabricated protein A-viologen hetero LB film was investigated using atomic force microscopy (AFM). Using the developed molecular film, antibody immobilization and fluorescence measurement was carried out.     

Novel emission properties of melem caused by the heavy metal effect of lanthanides(III) in a LB film.

A novel emissive molecular system is constructed by the intercalation of the fluorophore melem (triamino-tri-s-triazine) within a Langmuir-Blodgett (LB) film of stearic acid with the periodic arrangement of lanthanides (Ln(III)), mainly Pr(III) with supporting of Eu(III). From emission spectra, decay curves, quantum yields and XPS measurements, it is clarified that the external heavy metal effect of Pr(III) on melem is much stronger in the film than in the bulk solid state, resulting in producing an unusual triplet state of melem. The triplet state of melem in the LB film donates the excitation energy to Pr(III) in the LB film, which is completely different from the energy transfer pathway of Pr-melem complex in the solid state through the singlet state of melem.     

Langmuir-Blodgett monolayer films of bacterial photosynthetic membranes and isolated reaction centers: preparation, spectrophotometric and electrochemical characterization.

The Langmuir-Blodgett (LB) film technique has been successfully applied to the construction of stable and photo-active films of chromatophore membranes and isolated reaction centers from two species of photosynthetic bacteria, Rhodobacter sphaeroides and Rhodopseudomonas viridis. LB films of these preparations were characterized at the air/water interface through compression isotherms and film stabilities. Films deposited on glass slides were analyzed by spectrophotometric and redox potentiometric techniques. The results obtained indicate that the in vivo properties of the photosynthetic apparatus in the deposited films are essentially unchanged. Furthermore, the pigments and redox cofactors in the films are highly oriented and offer a unique opportunity for structural and functional studies of the kind described in the accompanying paper (Biochim. Biophys. Acta 1057 (1991) 258-272).     

表面压与紫膜含量对紫膜LB膜质量的影响

本文报导了用表面轮廓测量仪测量了不同表面压和不同紫膜含量下制备的紫膜LB膜中紫膜碎片的厚度。实验结果表明:单个紫膜碎片在紫脂LB膜中的厚度为50左右,相当数量的紫膜碎片之间有重叠。当表面压为30mN/m或紫膜碎片与大豆磷脂之重量比为20:1时,紫膜碎片容易进入到水相或碎片之间相互重叠变得更加严重。