Metal corrosion by aerobic bacteria isolated from stimulated corrosion systems: Effects of additional nitrate sources

Many microorganisms are reported to influence the corrosive behaviour of mild steel and stainless steel in different habitats. In this study, 40 bacterial strains were isolated from corroded mild steel and stainless steel coupons in the nitrate supplemented environments. The corrosion abilities of the isolates against the mild steel and stainless steel coupons were tested with or without additional nitrate sources. The presence of bacterial isolates alone stimulated the corrosion of mild steel coupons. Most of the bio-corrosion processes of mild steel coupons were mitigated by adding nitrate supplement with bacterial isolates. The effects of bacterial isolates and additional nitrogen sources on corrosion of stainless steels were varied. Not all bacterial isolates stimulated the corrosion on stainless steel during the study period. Unlike the effects on mild steel coupons, additional NaNO₃ might stimulate, retard the corrosion rate by the bacterial isolates or have limited effects. Similar results were obtained when NH₄NO₃ was used. Phylogenetic analysis demonstrated that all isolates were closely related. The majority of the bacterial isolates from corroded metal coupons were identified as Bacillus species. Others were identified as Pseudomonas sp., Marinobacter sp., and Halomonas species. The results prove that the isolated aerobic microorganisms do play a role in the corrosion process of stainless and mild steel. Adding additional nitrate sources might be a tool to mitigate corrosion of mild steel which was stimulated by the presence of bacteria. However, to prevent the corrosion of stainless steels, it might need a trial and errors approach in each case.     

Increased bioclogging and corrosion risk by sulfate addition during iodine recovery at a natural gas production plant

Iodine recovery at a natural gas production plant in Japan involved the addition of sulfuric acid for pH adjustment, resulting in an additional about 200 mg/L of sulfate in the waste brine after iodine recovery. Bioclogging occurred at the waste brine injection well, causing a decrease in well injectivity. To examine the factors that contribute to bioclogging, an on-site experiment was conducted by amending 10 L of brine with different conditions and then incubating the brine for 5 months under open air. The control case was exposed to open air but did not receive additional chemicals. When sulfate addition was coupled with low iodine, there was a drastic increase in the total amount of accumulated biomass (and subsequently the risk of bioclogging) that was nearly six times higher than the control. The bioclogging-associated corrosion rate of carbon steel was 84.5 μm/year, which is four times higher than that observed under other conditions. Analysis of the microbial communities by denaturing gradient gel electrophoresis revealed that the additional sulfate established a sulfur cycle and induced the growth of phototrophic bacteria, including cyanobacteria and purple bacteria. In the presence of sulfate and low iodine levels, cyanobacteria and purple bacteria bloomed, and the accumulation of abundant biomass may have created a more conducive environment for anaerobic sulfate-reducing bacteria. It is believed that the higher corrosion rate was caused by a differential aeration cell that was established by the heterogeneous distribution of the biomass that covered the surface of the test coupons.     

Corrosion protection of low-carbon steel using exopolysaccharide coatings from <Emphasis Type="Italic">Leuconostoc mesenteroides</Emphasis>

Corrosion of metals is a serious and challenging problem faced worldwide by industry. Purified Leuconostoc mesenteroides exopolysaccharide (EPS) coatings, cast from aqueous solution, inhibited the corrosion of low-carbon steel as determined by electrochemical impedance spectroscopy (EIS). There were two different corrosion behaviors exhibited when EPS films from different strains were cast onto the steel. One EPS coating reacted immediately with the steel substrate to form an iron (III) oxide layer (“rust”) during the drying process while another did not. The samples that did not flash corrode had higher corrosion inhibition and formed an iron (II) passivation layer during EIS testing that persisted after the cells were disassembled. Corrosion inhibition was strain-specific as polysaccharides with similar structure did not have the same corrosion potential.     

Laboratory-Based Model of Microbiologically Induced Corrosion of Copper

The interactions of bacteria isolated from corroded copper coupons on thin films of copper evaporated onto germanium internal reflection elements were evaluated nondestructively in real time by attentuated total reflectance Fourier transform infrared spectroscopy. The films were stable in the presence of flowing or static sterile culture medium. When exposed to and colonized by the bacterium CCI 8, the copper thin film corroded. Corrosion was enhanced under quiescent conditions. In conjunction with corrosion of the copper thin film was an increase in the concentration of polysaccharide material at the copper-biofilm interface. A different bacterium (CCI 11) did not corrode the copper thin film, and the establishment of this bacterium on the copper surface prevented corrosion of the thin film by CCI 8.     

Surface Changes in Mild Steel Coupons from the Action of Corrosion-Causing Bacteria

Changes which occur on the surface of mild steel coupons submerged in cultures of an Fe(III)-reducing bacterium, isolated from corroded pipe systems carrying crude oil, were studied microscopically to investigate the interaction between the corrosion-causing bacterium and the corroding mild steel coupon. Under micro-aerobic conditions and in the absence of the bacteria, a dense, crystalline, amorphous coat formed on the surface of the steel coupons. In the presence of bacteria the surface coat was extensively removed, exposing the bare metal to the environment. After about 2 weeks of exposure, the removal of the surface coating was followed by colonization of the metal surface by the bacteria. Colonization was mediated by fibrous, exopolysaccharidic material formed by the bacteria. Extension of studies to other bacteria isolated from crude oil and corroded pipes reveals that the formation of exopolysaccharide fibers and possession of adherent properties are common characteristics of bacteria from crude oil systems.     

Isolation of Iodide-Oxidizing Bacteria from Iodide-Rich Natural Gas Brines and Seawaters

Iodide-oxidizing bacteria (IOB), which oxidize iodide (I⁻) to molecular iodine (I₂), were isolated from iodide-rich (63 μM to 1.2 mM) natural gas brine waters collected from several locations. Agar media containing iodide and starch were prepared, and brine waters were spread directly on the media. The IOB, which appeared as purple colonies, were obtained from 28 of the 44 brine waters. The population sizes of IOB in the brines were 10² to 10⁵ colony-forming units (CFU) mL⁻¹. However, IOB were not detected in natural seawaters and terrestrial soils (fewer than 10 CFU mL⁻¹ and 10² CFU g wet weight of soils⁻¹, respectively). Interestingly, after the enrichment with 1 mM iodide, IOB were found in 6 of the 8 seawaters with population sizes of 10³ to 10⁵ CFU mL⁻¹. 16S rDNA sequencing and phylogenetic analyses showed that the IOB strains are divided into two groups within the α-subclass of the Proteobacteria. One of the groups was phylogenetically most closely related to Roseovarius tolerans with sequence similarities between 94% and 98%. The other group was most closely related to Rhodothalassium salexigens, although the sequence similarities were relatively low (89% to 91%). The iodide-oxidizing reaction by IOB was mediated by an extracellular enzyme protein that requires oxygen. Radiotracer experiments showed that IOB produce not only I₂ but also volatile organic iodine, which were identified as diiodomethane (CH₂I₂) and chloroiodomethane (CH₂ClI). These results indicate that at least two types of IOB are distributed in the environment, and that they are preferentially isolated in environments in which iodide levels are very high. It is possible that IOB oxidize iodide in the natural environment, and they could significantly contribute to the biogeochemical cycling of iodine.     

Microbially influenced corrosion of galvanized steel pipes in aerobic water systems

Aims: To investigate the role of heterotrophic bacteria in the corrosion of galvanized steel in the presence of water. Methods and Results: Samples were taken from corroding galvanized steel pipes conveying water for specialist applications, and heterotrophic bacteria were isolated and cultured. The majority of bacteria were Gram‐negative aerobes and included Pseudomonas sp., Bacillus pumilus, Afipia spp. and Blastobacter denitrificans/Bradyrhizobium japonicum. Zinc tolerance was assessed through growth and zinc disc diffusion experiments. In general, zinc negatively influenced growth rates. An unidentified yeast also isolated from the system demonstrated a high tolerance to zinc at concentrations up to 4 g l^?1. Coupon experiments were performed to assess corrosion by the bacteria on galvanized steel and steel coupons. The majority of isolates as pure culture biofilms (69%) accelerated corrosion of galvanized coupons, assessed as zinc release, relative to sterile control coupons (P < 0·05). Pure culture biofilms did not increase the corrosion of steel, with four isolates demonstrating protective effects. Conclusions: Pure culture biofilms of heterotrophic bacteria isolated from a corroding galvanized pipe system were found to accelerate the corrosion of galvanized steel coupons. Significance and Impact of the Study: Microbially influenced corrosion is a potential contributor to sporadically occurring failures in galvanized steel systems containing water. Management strategies should consider microbial control as a means for corrosion prevention in these systems.     

Iodine from bacterial iodide oxidization by Roseovarius spp. inhibits the growth of other bacteria

Microbial activities in brine, seawater, or estuarine mud are involved in iodine cycle. To investigate the effects of the microbiologically induced iodine on other bacteria in the environment, a total of 13 bacteria that potentially participated in the iodide-oxidizing process were isolated from water or biofilm at a location containing 131 μg ml^?1 iodide. Three distinct strains were further identified as Roseovarius spp. based on 16 S rRNA gene sequences after being distinguished by restriction fragment length polymorphism analysis. Morphological characteristics of these three Roseovarius spp. varied considerably across and within strains. Iodine production increased with Roseovarius spp. growth when cultured in Marine Broth with 200 μg ml^?1 iodide (I^?). When 10⁶ CFU/ml Escherichia coli, Pseudomonas aeruginosa, and Bacillus pumilus were exposed to various concentrations of molecular iodine (I₂), the minimum inhibitory concentrations (MICs) were 0.5, 1.0, and 1.0 μg ml^?1, respectively. However, fivefold increases in the MICs for Roseovarius spp. were obtained. In co-cultured Roseovarius sp. IOB-7 and E. coli in Marine Broth containing iodide (I^?), the molecular iodine concentration was estimated to be 0.76 μg ml^?1 after 24 h and less than 50 % of E. coli was viable compared to that co-cultured without iodide. The growth inhibition of E. coli was also observed in co-cultures with the two other Roseovarius spp. strains when the molecular iodine concentration was assumed to be 0.52 μg ml^?1.     

Marine sulfate-reducing bacteria cause serious corrosion of iron under electroconductive biogenic mineral crust

Iron (Fe(0) ) corrosion in anoxic environments (e.g. inside pipelines), a process entailing considerable economic costs, is largely influenced by microorganisms, in particular sulfate-reducing bacteria (SRB). The process is characterized by formation of black crusts and metal pitting. The mechanism is usually explained by the corrosiveness of formed H(2) S, and scavenge of 'cathodic' H(2) from chemical reaction of Fe(0) with H(2) O. Here we studied peculiar marine SRB that grew lithotrophically with metallic iron as the only electron donor. They degraded up to 72% of iron coupons (10?mm?×?10?mm?×?1?mm) within five months, which is a technologically highly relevant corrosion rate (0.7?mm?Fe(0) year(-1) ), while conventional H(2) -scavenging control strains were not corrosive. The black, hard mineral crust (FeS, FeCO(3) , Mg/CaCO(3) ) deposited on the corroding metal exhibited electrical conductivity (50?S?m(-1) ). This was sufficient to explain the corrosion rate by electron flow from the metal (4Fe(0) →?4Fe(2+) +?8e(-) ) through semiconductive sulfides to the crust-colonizing cells reducing sulfate (8e(-) +?SO(4) (2-) +?9H(+) →?HS(-) +?4H(2) O). Hence, anaerobic microbial iron corrosion obviously bypasses H(2) rather than depends on it. SRB with such corrosive potential were revealed at naturally high numbers at a coastal marine sediment site. Iron coupons buried there were corroded and covered by the characteristic mineral crust. It is speculated that anaerobic biocorrosion is due to the promiscuous use of an ecophysiologically relevant catabolic trait for uptake of external electrons from abiotic or biotic sources in sediments.     

Importance of biofilm formation for corrosion inhibition of SAE 1018 steel by axenic aerobic biofilms

To investigate if corrosion inhibition by aerobic biofilms is a general phenomenon, carbon steel (SAE 1018) coupons were exposed to a complex liquid medium (Luria–Bertani) and seawater-mimicking medium (VNSS) containing fifteen different pure-culture bacterial suspensions representing seven genera. Compared to sterile controls, the mass loss in the presence of these bacteria (which are capable of developing a biofilm to various degrees) decreased by 2- to 15-fold. The extent of corrosion inhibition in LB medium depended on the nature of the biofilm: an increased proportion of live cells, observed with confocal scanning laser microscopy (CSLM) and image analysis, decreased corrosion. Corrosion inhibition in LB medium was greatest with Pseudomonas putida (good biofilm formation), while metal coupons exposed to Streptomyces lividans in LB medium (poor biofilm formation) corroded in a manner similar to the sterile controls. Pseudomonas mendocina KR1 reduced corrosion the most in VNSS. It appears that only a small layer of active, respiring cells is required to inhibit corrosion, and the corrosion inhibition observed is due to the attached biofilm. Received 09 December 1996/ Accepted in revised form 19 March 1997     

Bacterial corrosion of iron in seawater in situ, and in aerobic and anaerobic model systems

Abstract A screening of twenty-two marine isolates was made to examine their effects on corrosion of carbon steel ASTM A619. In batch cultures, sixteen of the isolates gave a lower corrosion than the control. Aerobic and anaerobic biofilm populations were formed by immersing iron coupons in natural seawater under aerobic and anaerobic conditions. The effects of the biofilms depended on a balance between the presence of oxygen and the type of population. An anaerobic population attached to the surface increased the corrosion rate if immersed in a suspension of Vibrio sp. DW1. The vibrio population probably 'protected' the anaerobic population from oxygen and may have provided nutrients, thereby creating conditions that allowed production of corrosive metabolites close to the metal. In contrast, coupons without a biofilm showed a decrease in the corrosion when immersed in the same vibrio suspension. The protective effect of a dense suspension of bacteria found earlier [5,6] was tested in situ in seawater. Iron coupons were immersed in dialysis bags with a suspension of Vibrio sp. DW1. Coupons immersed in dialysis bags with DW1 showed a lower degree of corrosion than coupons immersed in bags with seawater.     

Radiotracer Experiments on Biological Volatilization of Organic Iodine from Coastal Seawaters

Biological volatilization of iodine from seawaters was studied using a radiotracer technique. Seawater samples were incubated aerobically in serum bottles with radioactive iodide tracer (¹²⁵I), and volatile organic and inorganic iodine were collected with activated charcoal and silver wool trap, respectively. Iodine was volatilized mainly as organic iodine, and inorganic iodine volatilization was not observed. Influence of light intensity on the volatilization was determined, but no significant differences were observed under light (70,000 lux) and dark conditions. The effect of the chemical form of iodine on the volatilization was determined, and the results suggested that volatilization preferentially occurs from iodide (I^?) but not from iodate (IO₃ ^?). Volatilization did not occur when the samples were autoclaved or filtered through a 0.22-μm pore size membrane filter. Incubation of the samples with antibiotics caused decreased volatilization. Conversely, enhanced volatilization was observed when the samples were incubated with yeast extract. Fifty-nine marine bacterial strains were then randomly isolated from marine environments, and their iodine-volatilizing capacities were determined. Among these, 19 strains exhibited significant capacities for volatilizing iodine. 16S ribosomal RNA gene comparisons indicated that these bacteria are members of Proteobacteria (α and γ subdivisions) and Cytophaga-Flexibacter-Bacteroides group. One of the strains, strain C-19, volatilized 1 to 2% of total iodine during cultivation, and the gaseous organic iodine was identified as methyl iodide (CH₃I). These results suggest that organic iodine volatilization from seawaters occurs biologically, and that marine bacteria participate in the process. Considering that volatile organic iodine emitted from the oceans causes atmospheric ozone destruction, biological iodine volatilization from seawater is of great importance. Our results also contribute to prediction of movement and diffusion of long-lived radioactive iodine (¹²⁹I) in the environment.     

The effect of corrosion inhibitors on microbial communities associated with corrosion in a model flow cell system

A model flow cell system was designed to investigate pitting corrosion in pipelines associated with microbial communities. A microbial inoculum producing copious amounts of H₂S was enriched from an oil pipeline biofilm sample. Reservoirs containing a nutrient solution and the microbial inoculum were pumped continuously through six flow cells containing mild steel corrosion coupons. Two cells received corrosion inhibitor “A”, two received corrosion inhibitor “B”, and two (“untreated”) received no additional chemicals. Coupons were removed after 1 month and analyzed for corrosion profiles and biofilm microbial communities. Coupons from replicate cells showed a high degree of similarity in pitting parameters and in microbial community profiles, as determined by 16S rRNA gene sequence libraries but differed with treatment regimen, suggesting that the corrosion inhibitors differentially affected microbial species. Viable microbial biomass values were more than 10-fold higher for coupons from flow cells treated with corrosion inhibitors than for coupons from untreated flow cells. The total number of pits >10 mils diameter and maximum pitting rate were significantly correlated with each other and the total number of pits with the estimated abundance of sequences classified as Desulfomicrobium. The maximum pitting rate was significantly correlated with the sum of the estimated abundance of Desulfomicrobium plus Clostridiales, and with the sum of the estimated abundance of Desulfomicrobium plus Betaproteobacteria. The lack of significant correlation with the estimated abundance of Deltaproteobacteria suggests not all Deltaproteobacteria species contribute equally to microbiologically influenced corrosion (MIC) and that it is not sufficient to target one bacterial group when monitoring for MIC.     

Phylogenetic characterization of bacterial consortia obtained of corroding gas pipelines in Mexico

Characterization of the microbial populations formed in gas pipelines is essential to understand the metallic surface-microbe interaction, their role in metal corrosion, and to implement efficient monitoring and control strategies. Microbial community analysis in a corroded gas pipeline in a petroleum-producing facility in the Southeast region in Mexico was performed by traditional cultivation techniques and identification based on 16S rRNA gene sequence. In all samples, thin bacterial biofilms were observed and pitting corrosion was reveled after removing the biofilms. Six pure or mixed cultures of anaerobic bacteria were obtained and their 16S rRNA libraries were constructed, respectively. At least two members of each RFLP profile were sequenced and the phylogenetic affiliations of cloned bacterial 16S rRNA genes indicated that native biofilms were mainly colonized by Desulfovibrio vulgaris and Desulfovibrio desulfuricans, sulfate-reducing bacteria members; Citrobacter freundii, an Enterobacteriaceae member; Clostridium celerecrescens and Clostridium sporogenes, spore-forming anaerobic species and Cetobacterium somerae, a microaerotolerant, non-spore-forming fusobacteria. Some of these species have been observed consistently in other steel pipelines previously, but Cetobacterium members and C. celerecrescens are described for the fist time in this corroded gas pipeline. The potential role of each species in biofilm formation and steel corrosion is discussed.     

Marine prosthecate bacteria involved in the ennoblement of stainless steel

Ennoblement, a phenomenon in which open-circuit potential is elevated to a noble value, triggers metal corrosion in the environment and is considered to be biologically catalysed. This study investigated the involvement of marine microorganisms in the ennoblement of stainless steel coupons in sea water pumped from Kamaishi Bay. Scanning electron microscopy (SEM) showed significant attachment of prosthecate bacteria on the surfaces of stainless steel coupons in the course of ennoblement. In denaturing gradient gel electrophoresis (DGGE) analyses of polymerase chain reaction-amplified bacterial 16S rDNA fragments, several major bands were detected from the surface of the ennobled coupons, including those affiliated with the alpha and gamma subclasses of the Proteobacteria. After these observations, bacterial strains were isolated from the surface of the ennobled coupon. The 16S rDNA analysis revealed that a bacterial isolate (designated PWB3) corresponded to a major DGGE band representing an alpha-Proteobacterial population; a database analysis showed that its closest relative was Rhodobium spp., albeit with low homology ( approximately 89%). SEM indicated that this bacterium was a prosthecate bacterium that was morphologically similar to those observed on the ennobled coupons. In pure culture of strain PWB3, stainless steel coupons were ennobled when the culture was supplemented with MnCl2. Manganese was recovered from the surface of the ennobled coupons after treatment with a reducing agent. These results suggest that the attachment of manganese-oxidizing prosthecate bacteria triggered the ennoblement of stainless steel in Kamaishi Bay sea water.     

Considerations on the possibility of microbial clogging of re-injection wells of the wastewater generated in a water-dissolved natural gas field

Brine produced from water-dissolved natural gas reservoirs should be returned to the reservoirs after the resources are recovered to prevent land subsidence. However, the ability to re-inject the brine gradually decreases and is only rectified by carrying out backwashing treatment of re-injection wells. Because the brine contains high levels of iodine also, it is also recovered from the brine using sulfuric acid and oxidizing agents. These chemicals may stimulate the growth of microorganisms that may cause the clogging. In this study, we used column experiments to investigate the possibility of the microbial clogging.Significant clogging was observed on the columns that were treated by the brine containing both indigenous microorganisms and dissolved oxygen. In particular, iodide-oxidizing bacteria were detected from the columns and original brine dominantly; therefore, it was assumed to have an important influence on the clogging. Iodine that was produced by iodide-oxidizing bacteria corroded iron in the sand under the presence of dissolved oxygen. Eluted Iron formed ferric hydroxide colloid in the brine and it caused the clogging of the pore spaces.We also demonstrated that deoxidized brine inhibited the iodide-oxidizing bacteria from becoming dominant and the column from the clogging through the column experiments. From these results, we can suggest removing dissolved oxygen as the most feasible countermeasures for the clogging.     

Characterization of bacterial community associated to biofilms of corroded oil pipelines from the southeast of Mexico

Microbial communities associated to biofilms promote corrosion of oil pipelines. The community structure of bacteria in the biofilm formed in oil pipelines is the basic knowledge to understand the complexity and mechanisms of metal corrosion. To assess bacterial diversity, biofilm samples were obtained from X52 steel coupons corroded after 40 days of exposure to normal operation and flow conditions. The biofilm samples were directly used to extract metagenomic DNA, which was used as template to amplify 16S ribosomal gene by PCR. The PCR products of 16S ribosomal gene were also employed as template for sulfate-reducing bacteria (SRB) specific nested-PCR and both PCR products were utilized for the construction of gene libraries. The V3 region of the 16S rRNA gene was also amplified to analyse the bacterial diversity by analysis of denaturing gradient gel electrophoresis (DGGE). Ribosomal library and DGGE profiles exhibited limited bacterial diversity, basically including Citrobacter spp., Enterobacter spp. and Halanaerobium spp. while Desulfovibrio alaskensis and a novel clade within the genus Desulfonatronovibrio were detected from the nested PCR library. The biofilm samples were also taken for the isolation of SRB. Desulfovibrio alaskensis and Desulfovibrio capillatus, as well as some strains related to Citrobacter were isolated. SRB consists in a very small proportion of the community and Desulfovibrio spp. were the relatively abundant groups among the SRB. This is the first study directly exploring bacterial diversity in corrosive biofilms associated to steel pipelines subjected to normal operation conditions.     

Effects of diverse water pipe materials on bacterial communities and water quality in the annular reactor

To investigate the effects of pipe materials on biofilm accumulation and water quality, an annular reactor with the sample coupons of four pipe materials (steel, copper, stainless steel, and polyvinyl chloride) was operated under hydraulic conditions similar to a real plumbing system for 15 months. The bacterial concentrations were substantially increased in the steel and copper reactors with progression of corrosion, whereas those in stainless steel (STS) and polyvinyl chloride (PVC) reactors were affected mainly by water temperature. The heterotrophic plate count (HPC) of biofilms was about 100 times higher on steel pipe than other pipes throughout the experiment, with the STS pipe showing the lowest bacterial number at the end of the operation. Analysis of the 16S rDNA sequences of 176 cultivated isolates revealed that 66.5% was Proteobacteria and the others included unclassified bacteria, Actinobacteria, and Bacilli. Regardless of the pipe materials, Sphingomonas was the predominant species in all biofilms. PCR-DGGE analysis showed that steel pipe exhibited the highest bacterial diversity among the metallic pipes, and the DGGE profile of biofilm on PVC showed three additional bands not detected from the profiles of the metallic materials. Environmental scanning electron microscopy showed that corrosion level and biofilm accumulation were the least in the STS coupon. These results suggest that the STS pipe is the best material for plumbing systems in terms of the microbiological aspects of water quality.     

Corrosion behaviour and biofouling characteristics of structural steel in the coastal waters of the Gulf of Mannar (Bay of Bengal), India

The corrosion behaviour and biofouling characteristics of structural steel coupons at three different locations in the Gulf of Mannar were studied over a period of 2 years. Oyster fouling was predominant at Tuticorin open sea, while barnacle fouling was more pronounced at Mandapam and Tuticorin harbour. Among the three locations, Tuticorin open sea showed a markedly higher biomass, particularly after 12 and 18 months. The extent of crevice corrosion caused by hard foulers was more pronounced at Tuticorin harbour when compared to that at the other two locations. The corrosion rate of the structural steel coupons for 24 months was in the order, Mandapam?> Tuticorin harbor?>?Tuticorin open sea. The loss in tensile strength at 12 and 24 months was in the order, Tuticorin open sea?>?Tuticorin harbor?>?Mandapam. The corrosion behaviour of the structural steel coupons was strongly influenced by the variations in the biofouling assemblage at the three different coastal locations.     

Corrosion behaviour and biofouling characteristics of structural steel in the coastal waters of the Gulf of Mannar (Bay of Bengal), India

The corrosion behaviour and biofouling characteristics of structural steel coupons at three different locations in the Gulf of Mannar were studied over a period of 2 years. Oyster fouling was predominant at Tuticorin open sea, while barnacle fouling was more pronounced at Mandapam and Tuticorin harbour. Among the three locations, Tuticorin open sea showed a markedly higher biomass, particularly after 12 and 18 months. The extent of crevice corrosion caused by hard foulers was more pronounced at Tuticorin harbour when compared to that at the other two locations. The corrosion rate of the structural steel coupons for 24 months was in the order, Mandapam > Tuticorin harbor > Tuticorin open sea. The loss in tensile strength at 12 and 24 months was in the order, Tuticorin open sea > Tuticorin harbor > Mandapam. The corrosion behaviour of the structural steel coupons was strongly influenced by the variations in the biofouling assemblage at the three different coastal locations.