Motor function and regulation of myosin X.

Myosin X is a member of the diverse myosin superfamily that is ubiquitously expressed in various mammalian tissues. Although its association with actin in cells has been shown, little is known about its biochemical and mechanoenzymatic function at the molecular level. We expressed bovine myosin X containing the entire head, neck, and coiled-coil domain and purified bovine myosin X in Sf9 cells. The Mg(2+)-ATPase activity of myosin X was significantly activated by actin with low K(ATP). The actin-activated ATPase activity was reduced at Ca(2+) concentrations above pCa 5 in which 1 mol of calmodulin light chain dissociates from the heavy chain. Myosin X translocates F-actin filaments with the velocity of 0.3 microm/s with the direction toward the barbed end. The actin translocating activity was inhibited at concentrations of Ca(2+) at pCa 6 in which no calmodulin dissociation takes place, suggesting that the calmodulin dissociation is not required for the inhibition of the motility. Unlike class V myosin, which shows a high affinity for F-actin in the presence of ATP, the K(actin) of the myosin X ATPase was much higher than that of myosin V. Consistently nearly all actin dissociated from myosin X in the presence of ATP. ADP did not significantly inhibit the actin-activated ATPase activity of myosin X, suggesting that the ADP release step is not rate-limiting. These results suggest that myosin X is a nonprocessive motor. Consistently myosin X failed to support the actin translocation at low density in an in vitro motility assay where myosin V, a processive motor, supports the actin filament movement.     

Characterization of the motor activity of mammalian myosin VIIA

Myosin VIIA was cloned from rat kidney, and the construct (M7IQ5) containing the motor domain, IQ domain, and the coiled-coil domain as well as the full-length myosin VIIA (M7full) was expressed. The M7IQ5 contained five calmodulins. Based upon native gel electrophoresis and gel filtration, it was found that M7IQ5 was single-headed, whereas M7full was two-headed, suggesting that the tail domain contributes to form the two-headed structure. M7IQ5 had Mg(2+)-ATPase activity that was markedly activated by actin with K(actin) of 33 microm and V(max) of 0.53 s(-1) head(-1). Myosin VIIA required an extremely high ATP concentration for ATPase activity, ATP-induced dissociation from actin, and in vitro actin-translocating activity. ADP markedly inhibited the actin-activated ATPase activity. ADP also significantly inhibited the ATP-induced dissociation of myosin VIIA from actin. Consistently, ADP decreased K(actin) of the actin-activated ATPase. ADP decreased the actin gliding velocity, although ADP did not stop the actin gliding even at high concentration. These results suggest that myosin VIIA has slow ATP binding or low affinity for ATP and relatively high affinity for ADP. The directionality of myosin VIIA was determined by using the polarity-marked dual fluorescence-labeled actin filaments. It was found that myosin VIIA is a plus-directed motor.     

Effects of Ca2+ and Mg2+ on the actomyosin adenosine-5'-triphosphatase of stably phosphorylated gizzard myosin

There are conflicting reports on the effect of Ca2+ on actin activation of myosin adenosine-triphosphatase (ATPase) once the light chain is fully phosphorylated by a calcium calmodulin dependent kinase. Using thiophosphorylated gizzard myosin, Sherry et al. [Sherry, J. M. F., Gorecka, A., Aksoy, M. O., Dabrowska, R., & Hartshorne, D. J. (1978) Biochemistry 17, 4417-4418] observed that the actin activation of ATPase was not inhibited by the removal of Ca2+. Hence, it was suggested that the regulation of actomyosin ATPase activity of gizzard myosin by calcium occurs only via phosphorylation. In the present study, phosphorylated and thiophosphorylated myosins were prepared free of kinase and phosphatase activity; hence, the ATPase activity could be measured at various concentrations of Ca2+ and Mg2+ without affecting the level of phosphorylation. The ATPase activity of myosin was activated either by skeletal muscle or by gizzard actin at various concentrations of Mg2+ and either at pCa 5 or at pCa 8. The activation was sensitive to Ca2+ at low Mg2+ concentrations with both actins. Tropomyosin potentiated the actin-activated ATPase activity at all Mg2+ and Ca2+ concentrations. The calcium sensitivity of phosphorylated and thiophosphorylated myosin reconstituted with actin and tropomyosin was most pronounced at a free Mg2+ concentration of about 3 mM. The binding of 125I-tropomyosin to actin showed that the calcium sensitivity of ATPase observed at low Mg2+ concentration is not due to a calcium-mediated binding of tropomyosin to F-actin. The actin activation of both myosins was insensitive to Ca2+ when the Mg2+ concentration was increased above 5 mM.(ABSTRACT TRUNCATED AT 250 WORDS)     

Regulation of the actin-activated ATPase of aorta smooth muscle myosin

Phosphorylation of the 20,000-Da light chains, LC20, of vertebrate smooth muscle myosins is thought to be the primary mechanism for regulating the actin-activated ATPase activities of these myosins and consequently smooth muscle contraction. While actin stimulates the MgATPase activities of phosphorylated smooth muscle myosins, it is generally believed that the MgATPase activities of the unphosphorylated myosins are not stimulated by actin. However, under conditions where both unphosphorylated (5% phosphorylated LC20) and phosphorylated calf aorta myosins are mostly filamentous, the maximum rate, Vmax, of the actin-activated ATPase of the unphosphorylated myosin is one-half that of the phosphorylated myosin. While LC20 phosphorylation causes only a modest increase in Vmax, in the presence of tropomyosin, this phosphorylation does cause up to a 10-fold decrease in Kapp, the actin concentration required to achieve 1/2 Vmax. In the presence of low concentrations of tropomyosin/actin, a linear relationship is obtained between the fraction of LC20 phosphorylated and stimulation of the actin-activated ATPase. The relatively high actin-activated ATPase activity of unphosphorylated aorta myosin suggests that other proteins may be involved in the regulation of smooth muscle contraction. In contrast to the results presented here for aorta myosin, it has been reported that actin does not activate the MgATPase activity of unphosphorylated gizzard myosin and that the actin-activated ATPase of gizzard myosin increases more slowly than LC20 phosphorylation.     

Calmodulin bound to the first IQ motif is responsible for calcium-dependent regulation of myosin 5a

Myosin 5a is as yet the best-characterized unconventional myosin motor involved in transport of organelles along actin filaments. It is well-established that myosin 5a is regulated by its tail in a Ca(2+)-dependent manner. The fact that the actin-activated ATPase activity of myosin 5a is stimulated by micromolar concentrations of Ca(2+) and that calmodulin (CaM) binds to IQ motifs of the myosin 5a heavy chain indicates that Ca(2+) regulates myosin 5a function via bound CaM. However, it is not known which IQ motif and bound CaM are responsible for the Ca(2+)-dependent regulation and how the head-tail interaction is affected by Ca(2+). Here, we found that the CaM in the first IQ motif (IQ1) is responsible for Ca(2+) regulation of myosin 5a. In addition, we demonstrate that the C-lobe fragment of CaM in IQ1 is necessary for mediating Ca(2+) regulation of myosin 5a, suggesting that the C-lobe fragment of CaM in IQ1 participates in the interaction between the head and the tail. We propose that Ca(2+) induces a conformational change of the C-lobe of CaM in IQ1 and prevents interaction between the head and the tail, thus activating motor function.     

Isolation and characterization of myosin from amoebae of Physarum polycephalum

Myosin was isolated from amoebae of Physarum polycephalum and compared with myosin from plasmodia, another motile stage in the Physarum life cycle. Amoebal myosin contained heavy chains (Mr approximately 220,000), phosphorylatable light chains (Mr 18,000), and Ca2+-binding light chains (Mr 14,000) and possessed a two-headed long-tailed shape in electron micrographs after rotary shadow casting. In the presence of high salt concentrations, myosin ATPase activity increased in the following order: Mg-ATPase activity less than K-EDTA-ATPase activity less than Ca-ATPase activity. In the presence of low salt concentrations, Mg-ATPase activity was activated approximately 9-fold by skeletal muscle actin. This actin-activated ATPase activity was inhibited by micromolar levels of Ca2+. Amoebal myosin was indistinguishable from plasmodial myosin in ATPase activities and molecular shape. However, the heavy chain and phosphorylatable light chains of amoebal myosin could be distinguished from those of plasmodial myosin in sodium dodecyl sulfate-polyacrylamide gel electrophoresis, peptide mapping, and immunological studies, suggesting that these are different gene products. Ca2+-binding light chains of amoebal and plasmodial myosins were found to be identical using similar criteria, supporting our hypothesis that the Ca2+-binding light chain plays a key role in the inhibition of actin-activated ATPase activity in Physarum myosins by micromolar levels of Ca2+.     

Calcium functionally uncouples the heads of myosin VI

This study examines the steady state activity and in vitro motility of single-headed (S1) and double-headed (HMM) myosin VI constructs within the context of two putative modes of regulation. Phosphorylation of threonine 406 does not alter either the rate of actin filament sliding or the maximal actin-activated ATPase rate of S1 or HMM constructs. Thus, we do not observe any regulation of myosin VI by phosphorylation within the motor domain. Interestingly, in the absence of calcium, the myosin VI HMM construct moves in an in vitro motility assay at a velocity that is twice that of S1 constructs, which may be indicative of movement that is not based on a "lever arm" mechanism. Increasing calcium above 10 microm slows both the rate of ADP release from S1 and HMM actomyosin VI and the rates of in vitro motility. Furthermore, high calcium concentrations appear to uncouple the two heads of myosin VI. Thus, phosphorylation and calcium are not on/off switches for myosin VI enzymatic activity, although calcium may alter the degree of processive movement for myosin VI-mediated cargo transport. Lastly, calmodulin mutants reveal that the calcium effect is dependent on calcium binding to the N-terminal lobe of calmodulin.     

Ca2+ activates actin-filament sliding on scallop myosin but inhibits that on Physarum myosin

The actin-activated ATPase activity of Physarum myosin has been shown to be inhibited by microM levels of Ca2+, the mode of which is in contrast to the activating effect of Ca2+ on scallop myosin (Kohama, K. (1987) Adv. Biophys. 23, 149-182 for a review). To determine if Ca2+ regulates ATP-dependent sliding between actin and the myosins, fluorescent actin-filaments were allowed to move on the myosins fixed to a glass surface. The movement on Physarum and scallop myosins was inhibited and activated, respectively, by Ca2+. For this myosin-linked regulation to occur for Physarum myosin, myosin phosphorylation was shown to be a prerequisite.     

Kinetic mechanism and regulation of myosin VI.

Myosin VI is the only pointed end-directed myosin identified and is likely regulated by heavy chain phosphorylation (HCP) at the actin-binding site in vivo. We undertook a detailed kinetic analysis of the actomyosin VI ATPase cycle to determine whether there are unique adaptations to support reverse directionality and to determine the molecular basis of regulation by HCP. ADP release is the rate-limiting step in the cycle. ATP binds slowly and with low affinity. At physiological nucleotide concentrations, myosin VI is strongly bound to actin and populates the nucleotide-free (rigor) and ADP-bound states. Therefore, myosin VI is a high duty ratio motor adapted for maintaining tension and has potential to be processive. A mutant mimicking HCP increases the rate of P(i) release, which lowers the K(ATPase) but does not affect ADP release. These measurements are the first to directly measure the steps regulated by HCP for any myosin. Measurements with double-headed myosin VI demonstrate that the heads are not independent, and the native dimer hydrolyzes multiple ATPs per diffusional encounter with an actin filament. We propose an alternating site model for the stepping and processivity of two-headed high duty ratio myosins.     

Inhibition of Acanthamoeba myosin I heavy chain kinase by Ca(2+)-calmodulin.

The actin-activated Mg(2+)-ATPase activity of Acanthamoeba myosins I depends on phosphorylation of their single heavy chains by myosin I heavy chain kinase. Kinase activity is enhanced > 50-fold by autophosphorylation at multiple sites. The rate of kinase autophosphorylation is increased approximately 20-fold by acidic phospholipids independent of the presence of Ca2+ and diglycerides. We show in this paper that Ca(2+)-calmodulin inhibits phospholipid-stimulated autophosphorylation of myosin I heavy chain kinase and hence also inhibits the catalytic activity of unphosphorylated kinase in the presence of phospholipid. Ca(2+)-calmodulin does not inhibit kinase activity in the absence of phospholipid. Micromolar Ca(2+)-calmodulin also inhibits binding of myosin I heavy chain kinase to phospholipid vesicles and purified plasma membranes. Proteolytic removal of a 7-kDa NH2-terminal segment from the 97-kDa kinase prevents binding of both calmodulin and phospholipid; therefore, we propose that they bind to the same or overlapping sites. These data provide a mechanism by which Ca2+ could inhibit the actin-activated Mg(2+)-ATPase activity of the myosin I isozymes in vivo and thus regulate myosin I-dependent motile activities.     

Vertebrate myosin VIIb is a high duty ratio motor adapted for generating and maintaining tension

Kinetic adaptation of muscle and non-muscle myosins plays a central role in defining the unique cellular functions of these molecular motor enzymes. The unconventional vertebrate class VII myosin, myosin VIIb, is highly expressed in polarized cells and localizes to highly ordered actin filament bundles such as those found in the microvilli of the intestinal brush border and kidney. We have cloned mouse myosin VIIb from a cDNA library, expressed and purified the catalytic motor domain, and characterized its actin-activated ATPase cycle using quantitative equilibrium and kinetic methods. The myosin VIIb steady-state ATPase activity is slow (approximately 1 s(-1)), activated by very low actin filament concentrations (K(ATPase) approximately 0.7 microm), and limited by ADP release from actomyosin. The slow ADP dissociation rate constant generates a long lifetime of the strong binding actomyosin.ADP states. ADP and actin binding is uncoupled, which enables myosin VIIb to remain strongly bound to actin and ADP at very low actin concentrations. In the presence of 2 mm ATP and 2 microm actin, the duty ratio of myosin VIIb is approximately 0.8. The enzymatic properties of actomyosin VIIb are suited for generating and maintaining tension and favor a role for myosin VIIb in anchoring membrane surface receptors to the actin cytoskeleton. Given the high conservation of vertebrate class VII myosins, deafness phenotypes arising from disruption of normal myosin VIIa function are likely to reflect a loss of tension in the stereocilia of inner ear hair cells.     

Effects of phosphorylation, magnesium, and filament assembly on actin-activated ATPase of pig urinary bladder myosin

The relationship between the light-chain phosphorylation and the actin-activated ATPase activity of pig urinary bladder myosin was either linear or nonlinear depending on the free Mg2+ concentration. Varying the free [Mg2+] in the presence of 50 mM ionic strength (I) had a biphasic effect on the actin-activated ATPase. In 100 mM I, the activity increased on raising the free [Mg2+]. The activity of the phosphorylated myosin was 3-23-fold higher than that of the unphosphorylated myosin at all concentrations of free Mg2+, pH, and temperature used in this study. The increase in the turbidity and sedimentability of both phosphorylated and unphosphorylated myosins on raising the free [Mg2+] was associated with a rise in the actin-activated ATPase activity. However, myosin light-chain phosphorylation still had a remarkable effect on the actin activation. The myosin polymers formed under these conditions were sedimented by centrifugation. Experiments performed with myosin polymers formed in mixtures of unphosphorylated and phosphorylated myosins showed that the presence of phosphorylated myosin in these mixtures had a slight effect on the sedimentation of the unphosphorylated myosin but it had no effect on the actin-activated ATP hydrolysis. Electron microscopy showed that the unphosphorylated myosin formed unorganized aggregates while phosphorylated myosin molecules assembled into bipolar filaments with tapered ends. These data show that although the unphosphorylated and phosphorylated myosins have the same level of sedimentability and turbidity, the filament assembly present only with the phosphorylated myosin can be associated with the maximal actin activation of Mg-ATPase.     

Supramolecular regulation of the actin-activated ATPase activity of filaments of Acanthamoeba Myosin II

Acanthamoeba myosin II has three phosphorylation sites clustered near the end of the tail of each of its two heavy chains (six phosphorylation sites/molecule). Myosin II has little or no actin-activated ATPase activity when four to six of these sites are phosphorylated. Maximal actin-activated ATPase activity is obtained when all six sites are dephosphorylated. Under assay conditions, both phosphorylated and dephosphorylated myosin II form bipolar filaments. Filaments of dephosphorylated myosin II have larger sedimentation coefficients than filaments of phosphorylated myosin II but this difference does not explain the difference in their actin-activated ATPase activities. Heteropolymers, formed by mixing soluble dephosphorylated and phosphorylated myosins and then diluting the mixture into low ionic strength buffer containing MgCl2, have sedimentation coefficients close to those of the homopolymer of phosphorylated myosin. The actin-activated ATPase activities of heteropolymers are, under most conditions, lower than the equivalent mixtures of homopolymers of dephosphorylated and phosphorylated myosins. It is concluded, therefore, that the phosphorylation of myosin tails regulates the actin-activated ATPase activity of Acanthamoeba myosin II by affecting the myosin filament as a whole rather than specifically affecting the heads of the phosphorylated myosin molecules only.     

The sequence of the myosin 50-20K loop affects Myosin's affinity for actin throughout the actin-myosin ATPase cycle and its maximum ATPase activity

We are interested in the role that solvent-exposed, proteolytically sensitive surface loops play in myosin function. The 25-50K loop, or loop 1, is near the ATP binding site, while the 50-20K loop (loop 2) is in the actin binding site. Through chimeric studies, we have found that loop 1 affects ADP release [Murphy, C. T., and Spudich, J. A. (1998) Biochemistry 37, 6738-44], while loop 2 affects the actin-activated ATPase activity [Uyeda, T. Q.-P., et al. (1994) Nature 368, 567-9]. In the study described here, we have found that the kcat of the actin-activated ATPase activity is changed by the loop 2 substitutions in a manner that reflects the relative actin-activated ATPase activities of the donor myosins. Additionally, changes in loop 2 affect the affinity of myosin for actin both in the presence and in the absence of nucleotides. Pre-steady-state studies together with the ATPase and affinity data suggest that while loop 2 does not affect interactions between myosin and nucleotide, it plays a role in determining the affinity of myosin for actin in various nucleotide states and in the rate-limiting transition allowing phosphate release.     

The effects of caldesmon on the ATPase activities of rabbit skeletal-muscle myosin.

We studied the effects of caldesmon, a major actin- and calmodulin-binding protein found in a variety of muscle and non-muscle tissues, on the various ATPase activities of skeletal-muscle myosin. Caldesmon inhibited the actin-activated myosin Mg2+-ATPase, and this inhibition was enhanced by tropomyosin. In the presence of the troponin complex and tropomyosin, caldesmon inhibited the Ca2+-dependent actomyosin Mg2+-ATPase; this inhibition could be partly overcome by Ca2+/calmodulin. Caldesmon, phosphorylated to the extent of approximately 4 mol of Pi/mol of caldesmon, inhibited the actin-activated myosin Mg2+-ATPase to the same extent as did non-phosphorylated caldesmon. Both inhibitions could be overcome by Ca2+/calmodulin. Caldesmon also inhibited the Mg2+-ATPase activity of skeletal-muscle myosin in the absence of actin; this inhibition also could be overcome by Ca2+/calmodulin. Caldesmon inhibited the Ca2+-ATPase activity of skeletal-muscle myosin in the presence or absence of actin, at both low (0.1 M-KCl) and high (0.3 M-KCl) ionic strength. Finally, caldesmon inhibited the skeletal-muscle myosin K+/EDTA-ATPase at 0.1 M-KCl, but not at 0.3 M-KCl. Addition of actin resulted in no inhibition of this ATPase by caldesmon at either 0.1 M- or 0.3 M-KCl. These observations suggest that caldesmon may function in the regulation of actin-myosin interactions in striated muscle and thereby modulate the contractile state of the muscle. The demonstration that caldesmon inhibits a variety of myosin ATPase activities in the absence of actin indicates a direct effect of caldesmon on myosin. The inhibition of the actin-activated Mg2+-ATPase activity of myosin (the physiological activity) may not be due therefore simply to the binding of caldesmon to the actin filament causing blockage of myosin-cross-bridge-actin interaction.     

Calcium, nucleotide, and actin affect the interaction of mammalian Myo1c with its light chain calmodulin

To investigate the interaction of mammalian class I myosin, Myo1c, with its light chain calmodulin, we expressed (with calmodulin) truncation mutants consisting of the Myo1c motor domain followed by 0-4 presumed calmodulin-binding (IQ) domains (Myo1c (0IQ)-Myo1c (4IQ)). The amount of calmodulin associating with the Myo1c heavy chain increased with increasing number of IQ domains from Myo1c (0IQ) to Myo1c (3IQ). No calmodulin beyond that associated with Myo1c (3IQ) was found with Myo1c (4IQ) despite its availability, showing that Myo1c binds three molecules of calmodulin with no evidence of a fourth IQ domain. Unlike Myo1c (0IQ), the basal ATPase activity of Myo1c (1IQ) was >10-fold higher in Ca (2+) vs EGTA +/- exogenous calmodulin, showing that regulation is by Ca (2+) binding to calmodulin on the first IQ domain. The K m and V max of the actin-activated Mg (2+)-ATPase activity were largely independent of the number of IQ domains present and moderately affected by Ca (2+). In binding assays, some calmodulin pelleted with Myo1c heavy chain when actin was present, but a considerable fraction remained in the supernatant, suggesting that calmodulin is displaced most likely from the second IQ domain. The Myo1c heavy chain associated with actin in a nucleotide-dependent fashion. In ATP a smaller proportion of calmodulin pelleted with the heavy chain, suggesting that Myo1c undergoes nucleotide-dependent conformational changes that affect the affinity of calmodulin for the heavy chain. The studies support a model in which Myo1c in the inner ear is regulated by both Ca (2+) and nucleotide, which exert their effects on motor activity through the light-chain-binding region.     

Regulation of smooth muscle contractile proteins by calmodulin and cyclic AMP

The various protein components of a reversible phosphorylating system regulating smooth muscle actomyosin Mg-ATPase activity have been purified. The enzyme catalyzing phosphorylation of smooth muscle myosin, myosin-kinase, requires Ca2+ and the Ca2+-binding protein calmodulin for activity and binds calmodulin in a ratio of 1 mol calmodulin to 1 mol of myosin kinase. Myosin kinase can be phosphorylated by the catalytic subunit of cyclic AMP (cAMP)-dependent protein kinase, and phosphorylation of myosin kinase that does not have calmodulin bound results in a marked decrease in the affinity of this enzyme for Ca2+-calmodulin. This effect is reversed when myosin kinase is dephosphorylated by a phosphatase purified from smooth muscle. When the various components of the smooth muscle myosin phosphorylating-dephosphorylating system are reconstituted, a positive correlation is found between the state of myosin phosphorylation and the actin-activated Mg-ATPase activity of myosin. Unphosphorylated and dephosphorylated myosin cannot be activated by actin, but the phosphorylated and rephosphorylated myosin can be activated by actin. The same relationship between phosphorylation and enzymatic activity was found for a chymotryptic peptide of myosin, smooth muscle heavy meromyosin. The findings reported here suggest one mechanism by which Ca2+ and calmodulin may act to regulate smooth muscle contraction and how cAMP may modulate smooth muscle contractile activity.     

High affinity binding of brain myosin-Va to F-actin induced by calcium in the presence of ATP

Brain myosin-Va consists of two heavy chains, each containing a neck domain with six tandem IQ motifs that bind four to five calmodulins and one to two essential light chains. Previous studies demonstrated that myosin-Va exhibits an unusually high affinity for F-actin in the presence of ATP and that its MgATPase activity is stimulated by micromolar Ca(2+) in a highly cooperative manner. We demonstrate here that Ca(2+) also induces myosin-Va binding to and cosedimentation with F-actin in the presence of ATP in a similar cooperative manner and calcium concentration range as that observed for the ATPase activity. Neither hydrolysis of ATP nor buildup of ADP was required for Ca(2+)-induced cosedimentation. The Ca(2+)-induced binding was inhibited by low temperature or by 0.6 m NaCl, but not by 1% Triton X-100. Tight binding between myosin-Va and pyrene-labeled F-actin in the presence of ATP and Ca(2+) was also detected by quenching of the pyrene fluorescence. Negatively stained preparations of actomyosin-Va under Ca(2+)-induced binding conditions showed tightly packed F-actin bundles cross-linked by myosin-Va. Our data demonstrate that high affinity binding of myosin-Va and F-actin in the presence of ATP or 5'-O-(thiotriphosphate) is induced by micromolar concentrations of Ca(2+). Since Ca(2+) regulates both the actin binding properties and actin-activated ATPase of myosin-Va over the same concentration range, we suggest that the calcium signal may regulate the mechanism of processivity of myosin Va.     

Smooth muscle calponin. Inhibition of actomyosin MgATPase and regulation by phosphorylation

Calponin isolated from chicken gizzard smooth muscle inhibits the actin-activated MgATPase activity of smooth muscle myosin in a reconstituted system composed of contractile and regulatory proteins. ATPase inhibition is not due to inhibition of myosin phosphorylation since, at calponin concentrations sufficient to cause maximal ATPase inhibition, myosin phosphorylation was unaffected. Furthermore, calponin inhibited the actin-activated MgATPase of fully phosphorylated or thiophosphorylated myosin. Although calponin is a Ca2(+)-binding protein, inhibition did not require Ca2+. Furthermore, although calponin also binds to tropomyosin, ATPase inhibition was not dependent on the presence of tropomyosin. Calponin was phosphorylated in vitro by protein kinase C and Ca2+/calmodulin-dependent protein kinase II, but not by cAMP- or cGMP-dependent protein kinases, or myosin light chain kinase. Phosphorylation of calponin by either kinase resulted in loss of its ability to inhibit the actomyosin ATPase. The phosphorylated protein retained calmodulin and tropomyosin binding capabilities, but actin binding was greatly reduced. The calponin-actin interaction, therefore, appears to be responsible for inhibition of the actomyosin ATPase. These observations suggest that calponin may be involved in regulating actin-myosin interaction and, therefore, the contractile state of smooth muscle. Calponin function in turn is regulated by Ca2(+)-dependent phosphorylation.     

A conserved negatively charged amino acid modulates function in human nonmuscle myosin IIA

A myosin surface loop (amino acids 391-404) is postulated to be an important actin binding site. In human beta-cardiac myosin, mutation of arginine-403 to a glutamine or a tryptophan causes hypertrophic cardiomyopathy. There is a phosphorylatable serine or threonine residue present on this loop in some lower eukaryotic myosin class I and myosin class VI molecules. Phosphorylation of the myosin I molecules at this site regulates their enzymatic activity. In almost all other myosins, the homologous residue is either a glutamine or an aspartate, suggesting that a negative charge at this location is important for activity. To study the function of this loop, we have used site-directed mutagenesis and baculovirus expression of a heavy meromyosin- (HMM-) like fragment of human nonmuscle myosin IIA. An R393Q mutation (equivalent to the R403Q mutation in human beta-cardiac muscle myosin) has essentially no effect on the actin-activated MgATPase or in vitro motility of the expressed HMM-like fragment. Three mutations, D399K, D399A, and a deletion mutation that removes residues 393-402, all decrease both the V(max) of the actin-activated MgATPase by 8-10-fold and the rate of in vitro motility by a factor of 2-3. The K(ATPase) of the actin-activated MgATPase activity and the affinity constant for binding of HMM to actin in the presence of ADP are affected by less than a factor of 2. These data support an important role for the negative charge at this location but show that it is not critical to enzymatic activity.