Structure and function of the human sperm-specific isoform of protein kinase A (PKA) catalytic subunit Cα2

Protein kinase A (PKA) exists as several tissue-specific isoforms that through phosphorylation of serine and threonine residues of substrate proteins act as key regulators of a number of cellular processes. We here demonstrate that the human sperm-specific isoform of PKA named Cα2 is important for sperm motility and thus male fertility. Furthermore, we report on the first three-dimensional crystal structure of human apo Cα2 to 2.1 ?. Apo Cα2 displays an open conformation similar to the well-characterized apo structure of murine Cα1. The asymmetric unit contains two molecules and the core of the small lobe is rotated by almost 13° in the A molecule relative to the B molecule. In addition, a salt bridge between Lys72 and Glu91 was observed for Cα2 in the apo-form, a conformation previously found only in dimeric or ternary complexes of Cα1. Human Cα2 and Cα1 share primary structure with the exception of the amino acids at the N-terminus coded for by an alternative exon 1. The N-terminal glycine of Cα1 is myristoylated and this aliphatic chain anchors the N-terminus to an intramolecular hydrophobic pocket. Cα2 cannot be myristoylated and the crystal structure revealed that the equivalent hydrophobic pocket is unoccupied and exposed. Nuclear magnetic resonance (NMR) spectroscopy further demonstrated that detergents with hydrophobic moieties of different lengths can bind deep into this uncovered pocket. Our findings indicate that Cα2 through the hydrophobic pocket has the ability to bind intracellular targets in the sperm cell, which may modulate protein stability, activity and/or cellular localization.     

Solution structure of human saposin C: pH-dependent interaction with phospholipid vesicles

Saposin C binds to membranes to activate lipid degradation in lysosomes. To get insights into saposin C's function, we have determined its three-dimensional structure by NMR and investigated its interaction with phospholipid vesicles. Saposin C adopts the saposin-fold common to other members of the family. In contrast, the electrostatic surface revealed by the NMR structure is remarkably different. We suggest that charge distribution in the protein surface can modulate membrane interaction leading to the functional diversity of this family. We find that the binding of saposin C to phospholipid vesicles is a pH-controlled reversible process. The pH dependence of this interaction is sigmoidal, with an apparent pK(a) for binding close to 5.3. The pK(a) values of many solvent-exposed Glu residues are anomalously high and close to the binding pK(a). Our NMR data are consistent with the absence of a conformational change prior to membrane binding. All this information suggests that the negatively charged electrostatic surface of saposin C needs to be partially neutralized to trigger membrane binding. We have studied the membrane-binding behavior of a mutant of saposin C designed to decrease the negative charge of the electrostatic surface. The results support our conclusion on the importance of protein surface neutralization in binding. Since saposin C is a lysosomal protein and pH gradients occur in lysosomes, we propose that lipid degradation in the lysosome could be switched on and off by saposin C's reversible binding to membranes.     

NMR structures of the C-terminal segment of surfactant protein B in detergent micelles and hexafluoro-2-propanol

Although the membrane-associated surfactant protein B (SP-B) is an essential component of lung surfactant, which is itself essential for life, the molecular basis for its activity is not understood. SP-B's biophysical functions can be partially mimicked by subfragments of the protein, including the C-terminus. We have used NMR to determine the structure of a C-terminal fragment of human SP-B that includes residues 63-78. Structure determination was performed both in the fluorinated alcohol hexafluoro-2-propanol (HFIP) and in sodium dodecyl sulfate (SDS) micelles. In both solvents, residues 68-78 take on an amphipathic helical structure, in agreement with predictions made by comparison to homologous saposin family proteins. In HFIP, the five N-terminal residues of the peptide are largely unstructured, while in SDS micelles, these residues take on a well-defined compact conformation. Differences in helical residue side chain positioning between the two solvents were also found, with better agreement between the structures for the hydrophobic face than the hydrophilic face. A paramagnetic probe was used to investigate the position of the peptide within the SDS micelles and indicated that the peptide is located at the water interface with the hydrophobic face of the helix oriented inward, the hydrophilic face of the helix oriented outward, and the N-terminal residues even farther from the micelle center than those on the hydrophilic face of the alpha-helix. Interactions of basic residues of SP-B with anionic lipid headgroups are known to have an impact on function, and these studies demonstrate structural ramifications of such interactions via the differences observed between the peptide structures determined in HFIP and SDS.     

Sodium dodecyl sulfate stability of HLA-DR1 complexes correlates with burial of hydrophobic residues in pocket 1

Certain class II MHC-peptide complexes are resistant to SDS-induced dissociation. This property, which has been used as an in vivo as well as an in vitro peptide binding assay, is not understood at the molecular level. Here we have investigated the mechanistic basis of SDS stability of HLA-DR1 complexes by using a biosensor-based assay and SDS-PAGE with a combination of wild-type and mutant HLA-DR1 and variants of hemagglutinin peptide HA306-318. Experiments with wild-type DR1 along with previously published results establish that the SDS-stable complexes are formed only when the hydrophobic pocket 1 (P1) is occupied by a bulky aromatic (Trp, Phe, Tyr) or an aliphatic residue (Met, Ile, Val, Leu). To further explore whether the SDS sensitivity is primarily due to the exposed hydrophobic regions, we mutated residue beta Gly86 at the bottom of P1 to tyrosine, presumably reducing the depth of the pocket and the exposure of hydrophobic residues and increasing the contacts between subunits. In direct contrast to wild-type DR1, the peptide-free mutant DR1 exists as an alpha/beta heterodimer in SDS. Moreover, the presence of a smaller hydrophobic residue, such as alanine, as P1 anchor with no contribution from any other anchor is sufficient to enhance the SDS stability of the mutant complexes, demonstrating that the basis of SDS resistance may be localized to P1 interactions. The good correlation between SDS sensitivity and the exposure of hydrophobic residues provides a biochemical rationale for the use of this assay to investigate the maturation of class II molecules and the longevity of the complexes.     

Structure of the Escherichia coli quorum sensing protein SdiA: activation of the folding switch by acyl homoserine lactones

The three-dimensional structure of a complex between the N-terminal domain of the quorum sensing protein SdiA of Escherichia coli and a candidate autoinducer N-octanoyl-L-homoserine lactone (C8-HSL) has been calculated in solution from NMR data. The SdiA-HSL system shows the "folding switch" behavior that has been seen for quorum-sensing factors produced by other bacterial species. In the presence of C8-HSL, a significant proportion of the SdiA protein is produced in a folded, soluble form in an E.coli expression system, whereas in the absence of acyl homoserine lactones, the protein is expressed into insoluble inclusion bodies. In the three-dimensional structure, the autoinducer molecule is sequestered in a deep pocket in the hydrophobic core, forming an integral part of the core packing of the folded SdiA. The NMR spectra of the complex show that the bound C8-HSL is conformationally heterogeneous, either due to motion within the pocket or to heterogeneity of the bound structure. The C8-HSL conformation is defined by NOEs to the protein only at the terminal methyl group of the octanoyl chain. Unlike other well-studied bacterial quorum sensing systems such as LuxR of Vibrio fischeri and TraR of Agrobacterium tumefaciens, there is no endogenous autoinducer for SdiA in E.coli: the E.coli genome does not contain a gene analogous to the LuxI and TraI autoinducer synthetases. We show that two other homoserine lactone derivatives are also capable of acting as a folding-switch autoinducers for SdiA. The observed structural heterogeneity of the bound C8-HSL in the complex, together with the variety of autoinducer-type molecules that can apparently act as folding switches in this system, are consistent with the postulated biological function of the SdiA protein as a detector of the presence of other species of bacteria.     

Guanylate Cyclase-Activating Protein-2 Undergoes Structural Changes upon Binding to Detergent Micelles and Bicelles

GCAPs are neuronal Ca^2 +-sensors playing a central role in light adaptation. GCAPs are N-terminally myristoylated membrane-associated proteins. Although, the myristoylation of GCAPs plays an important role in light adaptation its structural and physiological roles are not yet clearly understood. The crystal-structure of GCAP-1 shows the myristoyl moiety inside the hydrophobic core of the protein, stabilizing the protein structure; but ²H-solid-state NMR investigations on the deuterated myristoyl moiety of GCAP-2 in the presence of liposomes showed that it is inserted into the lipid bilayer. In this study, we address the question of the localization of the myristoyl group of Ca^2 +-bound GCAP-2, and the influence of CHAPS-, DPC-micelles and DMPC/DHPC-bicelles on the structure, and on the localization of the myristoyl group, of GCAP-2 by solution-state NMR. We also carried out the backbone assignment. Characteristic chemical shift differences have been observed between the myristoylated and the non-myristoylated forms of the protein. Our results support the view that in the absence of membrane forming substances the myristoyl moiety is buried inside a hydrophobic pocket of GCAP-2 similar to the crystal structure of GCAP-1. Addition of CHAPS-micelles and DMPC/DHPC-bicelles cause specific structural changes localized in and around the myristoyl binding pocket. We interpret these changes as an indication for the extrusion of the myristoyl moiety from its binding pocket and its insertion into the hydrophobic interior of the membrane mimic. On the basis of the backbone chemical shifts, we propose a structural model of myristoylated GCAP-2 in the presence of Ca^2 + and membrane mimetics.     

Quantitative filtration-blotting of protein in the presence of sodium dodecyl sulfate and its use for protein assay

It is thought that sodium dodecyl sulfate (SDS), an anionic detergent, binds to hydrophobic moieties of peptide to destroy the conformational structure of protein. Because of this property, it is involved in many biochemical procedures such as separations of protein and proteolytic digestion. In the course of our study on a solid-phase protein assay, we found that SDS acts as an effective reagent for protein blotting onto a hydrophobic membrane of polyvinylidene difluoride with a manifold dot-blot apparatus. At least 0.1% SDS in an acid-ethanol blotting solution, while reducing the bias of pronounced interferers for protein assay to protein-membrane interaction, quantitatively retains protein on the membrane. Presumably, protein denatures by SDS to become an unfolded state and adsorbs into the membrane by hydrophobic interaction, even in the presence of excess SDS. Therefore, bolts stained with a pyrogallol red-molybdate complex (Pyromolex) reagent unreactive to the membrane allowed a precise protein determination without significant interference of materials, especially detergents in the sample solution. The filtration-blotting with SDS would be a crucial procedure for quantitative analyses such as immunoblotting in detergent-containing samples, together with the solid-phase protein assay with limited sample volumes, such as 20 microL or less.     

Structural analysis of lipid complexes of GM2-activator protein

The GM2-activator protein (GM2-AP) is a small lysosomal lipid transfer protein essential for the hydrolytic conversion of ganglioside GM2 to GM3 by beta-hexosaminidase A. The crystal structure of human apo-GM2-AP is known to consist of a novel beta-cup fold with a spacious hydrophobic interior. Here, we present two new structures of GM2-AP with bound lipids, showing two different lipid-binding modes within the apolar pocket. The 1.9A structure with GM2 bound shows the position of the ceramide tail and significant conformational differences among the three molecular copies in the asymmetric unit. The tetrasaccharide head group is not visible and is presumed to be disordered. However, its general position could be established through modeling. The structure of a low-pH crystal, determined at 2.5A resolution, has a significantly enlarged hydrophobic channel that merges with the apolar pocket. Electron density inside the pocket and channel suggests the presence of a trapped phospholipid molecule. Structure alignments among the four crystallographically unique monomers provide information on the potential role for lipid binding of flexible chain segments at the rim of the cavity opening. Two discrete orientations of the S130-T133 loop define an open and a closed configuration of the hydrophobic channel that merges with the apolar pocket. We propose: (i) that the low-pH structure represents an active membrane-binding conformation; (ii) that the mobile S130-T133 loop serves as a gate for passage of ligand into the apolar pocket; and (iii) that this loop and the adjacent apolar V59-W63 loop form a surface patch with two exposed tryptophan residues that could interface with lipid bilayers.     

Fluorimetric studies on the binding of 4-(dimethylamino)cinnamic acid with micelles and bovine serum albumin

The constrained photophysics of intramolecular charge transfer (ICT) probe 4-(dimethylamino)cinnamic acid (DMACA) was studied in different surfactant systems as well as in presence of model water soluble protein bovine serum albumin (BSA). Binding of the probe in ionic micelles like sodium dodecyl sulfate (SDS) and cetyl trimethyl ammonium bromide (CTAB) causes an increase in ICT fluorescence intensity, whereas, in non-ionic TritonX-100 (TX-100) the intensity decreases with a concomitant increase in emission from locally excited (LE) state. The observations were explained in terms of the different binding affinity, location of the probe and also the nature of specific hydrogen bonding interaction in the excited state nonradiative relaxation process of DMACA. The ICT fluorescence emission yield decreases in BSA due to the locking in of the probe buried in the hydrophobic pocket of the protein structure. SDS induced uncoiling of protein and massive cooperative binding between BSA and SDS is manifested by the release of probe molecules in relatively free aqueous environment.     

Response of SCP-2L domain of human MFE-2 to ligand removal: binding site closure and burial of peroxisomal targeting signal

In the study of the structure and function relationship of human MFE-2, we have investigated the dynamics of human MFE-2SCP-2L (hSCP-2L) and its response to ligand removal. A comparison was made with homologous rabbit SCP-2. Breathing and a closing motion are found, identifiable with an adjustment in size and a closing off of the binding pocket. Crucial residues for structural integrity have been identified. Particularly mobile areas of the protein are loop 1 that is connecting helices A and C in space, and helix D, next to the entrance of the pocket. In hSCP-2L, the binding pocket gets occupied by Phe93, which is making a tight hydrophobic contact with Trp36. In addition, it is found that the C-terminal peroxisomal targeting signal (PTS1) that is solvent exposed in the complexed structure becomes buried when no ligand is present. Moreover, an anti-correlation exists between burial of PTS1 and the size of the binding pocket. The results are in accordance with plant nsLTPs, where a similar accommodation of binding pocket size was found after ligand binding/removal. Furthermore, the calculations support the suggestion of a ligand-assisted targeting mechanism.     

Structural basis of sterol binding by NPC2, a lysosomal protein deficient in Niemann-Pick type C2 disease

NPC2 is a small lysosomal glycoprotein that binds cholesterol with submicromolar affinity. Deficiency in NPC2 is the cause of Niemann-Pick type C2 disease, a fatal neurovisceral disorder characterized by accumulation of cholesterol in lysosomes. Here we report the crystal structure of bovine NPC2 bound to cholesterol-3-O-sulfate, an analog that binds with greater apparent affinity than cholesterol. Structures of both apo-bound and sterol-bound NPC2 were observed within the same crystal lattice, with an asymmetric unit containing one molecule of apoNPC2 and two molecules of sterol-bound NPC2. As predicted from a previously determined structure of apoNPC2, the sterol binds in a deep hydrophobic pocket sandwiched between the two beta-sheets of NPC2, with only the sulfate substituent of the ligand exposed to solvent. In the two available structures of apoNPC2, the incipient ligand-binding pocket, which ranges from a loosely packed hydrophobic core to a small tunnel, is too small to accommodate cholesterol. In the presence of sterol, the pocket expands, facilitated by a slight separation of the beta-strands and substantial reorientation of some side chains, resulting in a perfect molding of the pocket around the hydrocarbon portion of cholesterol. A notable feature is the repositioning of two aromatic residues at the tunnel entrance that are essential for NPC2 function. The NPC2 structures provide evidence of a malleable binding site, consistent with the previously documented broad range of sterol ligand specificity.     

Fusogenic domain and lysines in saposin C

Saposin C, a sphingolipid activator protein with fusogenic activity, interacts specifically with the membrane containing negatively charged, unsaturated phospholipids. The kinetics and mechanism of saposin C-induced membrane fusion were previously investigated using acidic phospholipid liposomes. A hypothetic clip-on model for such a fusion process was illustrated by the ionic binding between saposin C and lipids, as well as the inter-saposin C hydrophobic interaction. Here, we report the location of the fusogenic domain in a linear sequence at the amino-terminal half of saposin C. This domain consisted of the first and second helical sequences. Selected positively charged lysines in the fusogenic domain were mutated to study the roles of basic residues in the saposin C-induced vesicle fusion. Based on the results, Lys13 and Lys17 were critical for the fusogenic activity, but had no effect on the enzymatic activation of acid beta-glucosidase (GCase). These results clearly indicate the segregation of the fusion and activation function into two different regions of saposin C. Interestingly, all the Lys mutant saposin Cs anchored on the acidic phospholipid membrane. Our data suggest that saposin C's fusogenic and activation functions have different requirements for the orientation and insertion manners of helical peptides in membranes.     

Expression, purification and structural studies of a short antimicrobial peptide

We have produced a small antimicrobial peptide PFWRIRIRR in bacteria utilizing production in the form of insoluble fusion protein with ketosteroid isomerase. The recombinant peptide was rapidly and efficiently isolated by acidic cleavage of the fusion protein based on the acid labile Asp-Pro bond at the N-terminus of the peptide. The peptide has antibacterial activity and neutralizes macrophage activation by LPS. The selectivity of the peptide against bacteria correlates with preferential binding to acidic phospholipid vesicles. Solution structure of the peptide in SDS and DPC micelles was determined by NMR. The peptide adopts a well-defined structure, comprising a short helical segment. Cationic and hydrophobic clusters are segregated along the molecular axis of the short helix, which is positioned perpendicular to the membrane plane. The position of the helix is shifted in two micellar types and more nonpolar surface is exposed in anionic micelles. Overall structure explains the advantageous role of the N-terminal proline residue, which forms an integral part of the hydrophobic cluster.     

Structural and membrane-binding properties of saposin D.

Saposin D is generated together with three similar proteins, saposins A, B and C, from a common precursor, called prosaposin, in acidic organelles such as late endosomes and lysosomes. Although saposin D has been reported to stimulate the enzymatic hydrolysis of sphingomyelin and ceramide, its physiological role has not yet been clearly established. In the present study we examined structural and membrane-binding properties of saposin D. At acidic pH, saposin D showed a great affinity for phospholipid membranes containing an anionic phospholipid such as phosphatidylserine or phosphatidic acid. The binding of saposin D caused destabilization of the lipid surface and, conversely, the association with the membrane markedly affected the fluorescence properties of saposin D. The presence of phosphatidylserine-containing vesicles greatly enhanced the intrinsic tyrosine fluorescence of saposin D, which contains tyrosines but not tryptophan residues. The structural properties of saposin D were investigated in detail using advanced MS analysis. It was found that the main form of saposin D consists of 80 amino acid residues and that the six cysteine residues are linked in the following order: Cys5-Cys78, Cys8-Cys72 and Cys36-Cys47. The disulfide pattern of saposin D is identical with that previously established for two other saposins, B and C, which also exhibit a strong affinity for lipids. The common disulfide structure probably has an important role in the interaction of these proteins with membranes. The analysis of the sugar moiety of saposin D revealed that the single N-glycosylation site present in the molecule is mainly modified by high-mannose-type structures varying from two to six hexose residues. Deglycosylation had no effect on the interaction of saposin D with phospholipid membranes, indicating that the glycosylation site is not related to the lipid-binding site. The association of saposin D with membranes was highly dependent on the composition of the bilayer. Neither ceramide nor sphingomyelin, sphingolipids whose hydrolysis is favoured by saposin D, promoted its binding, while the presence of an acidic phospholipid such as phosphatidylserine or phosphatidic acid greatly favoured the interaction of saposin D with vesicles at low pH. These results suggest that, in the acidic organelles where saposins are localized, anionic phospholipids may be determinants of the saposin D topology and, conversely, saposin D may affect the lipid organization of anionic phospholipid-containing membranes.     

The crystal structure of a c-Src complex in an active conformation suggests possible steps in c-Src activation

The regulation of the activity of Abl and Src family tyrosine kinases is mediated by intramolecular interactions between the SH3, SH2, and kinase (SH1) domains. We have determined the crystal structure of an unphosphorylated form of c-Src in which the SH2 domain is not bound to the C-terminal tail. This results in an open structure where the kinase domain adopts an active conformation and the C terminus binds within a hydrophobic pocket in the C-terminal lobe. NMR binding studies support the hypothesis that an N-terminal myristate could bind in this pocket, as observed for Abl, suggesting that c-Src may also be regulated by myristate binding. In addition, the structure contains a des-methyl analog of the antileukemia drug imatinib (STI571; Gleevec). This structure reveals why the drug shows a low affinity for active kinase conformations, contributing to its excellent kinase selectivity profile.     

Gain of local structure in an amphipathic peptide does not require a specific tertiary framework

In this work, we studied how an amphipathic peptide of the surface of the globular protein thioredoxin, TRX94‐108, acquires a native‐like structure when it becomes involved in an apolar interaction network. We designed peptide variants where the tendency to form α‐helical conformation is modulated by replacing each of the leucine amino acid residues by an alanine. The induction of structure caused by sodium dodecyl sulfate (SDS) binding was studied by capillary zone electrophoresis, circular dichroism, DOSY‐NMR, and molecular dynamics simulations (MDS). In addition, we analyzed the strength of the interaction between a C18 RP‐HPLC matrix and the peptides. The results presented here reveal that (a) critical elements in the sequence of the wild‐type peptide stabilize a SDS/peptide supramolecular cluster; (b) the hydrophobic nature of the interaction between SDS molecules and the peptide constrains the ensemble of conformations; (c) nonspecific apolar surfaces are sufficient to stabilize peptide secondary structure. Remarkably, MDS shed light on a contact network formed by a limited number of SDS molecules that serves as a structural scaffold preserving the helical conformation of this module. This mechanism might prevail when a peptide with low helical propensity is involved in structure consolidation. We suggest that folding of peptides sharing this feature does not require a preformed tightly‐packed protein core. Thus, the formation of specific tertiary interactions would be the consequence of peptide folding and not its cause. In this scenario, folding might be thought of as a process that includes unspecific rounds of structure stabilization guiding the protein to the native state. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

The physiological structure of human C-reactive protein and its complex with phosphocholine.

BACKGROUND: Human C-reactive protein (CRP) is the classical acute phase reactant, the circulating concentration of which rises rapidly and extensively in a cytokine-mediated response to tissue injury, infection and inflammation. Serum CRP values are routinely measured, empirically, to detect and monitor many human diseases. However, CRP is likely to have important host defence, scavenging and metabolic functions through its capacity for calcium-dependent binding to exogenous and autologous molecules containing phosphocholine (PC) and then activating the classical complement pathway. CRP may also have pathogenic effects and the recent discovery of a prognostic association between increased CRP production and coronary atherothrombotic events is of particular interest. RESUTLS: The X-ray structures of fully calcified C-reactive protein, in the presence and absence of bound PC, reveal that although the subunit beta-sheet jellyroll fold is very similar to that of the homologous pentameric protein serum amyloid P component, each subunit is tipped towards the fivefold axis. PC is bound in a shallow surface pocket on each subunit, interacting with the two protein-bound calcium ions via the phosphate group and with Glu81 via the choline moiety. There is also an unexpected hydrophobic pocket adjacent to the ligand. CONCLUSIONS: The structure shows how large ligands containing PC may be bound by CRP via a phosphate oxygen that projects away from the surface of the protein. Multipoint attachment of one planar face of the CRP molecule to a PC-bearing surface would leave available, on the opposite exposed face, the recognition sites for C1q, which have been identified by mutagenesis. This would enable CRP to target physiologically and/or pathologically significant complement activation. The hydrophobic pocket adjacent to bound PC invites the design of inhibitors of CRP binding that may have therapeutic relevance to the possible role of CRP in atherothrombotic events.     

NMR studies for identifying phosphopeptide ligands of the HIV-1 protein Vpu binding to the F-box protein beta-TrCP

The human immunodeficiency virus type 1 (HIV-1) Vpu enhances viral particle release and, its interaction with the ubiquitin ligase SCF-beta-TrCP triggers the HIV-1 receptor CD4 degradation by the proteasome. The interaction between beta-TrCP protein and ligands containing the phosphorylated DpSGXXpS motif plays a key role for the development of severe disease states, such as HIV or cancer. This study examines the binding and conformation of phosphopeptides (P1, LIERAEDpSG and P2, EDpSGNEpSE) from HIV protein Vpu to beta-TrCP with the objective of defining the minimum length of peptide needed for effective binding. The screening step can be analyzed by NMR spectroscopy, in particular, saturation transfer NMR methods clearly identify the residues in the peptide that make direct contact with beta-TrCP protein when bound. An analysis of saturation transfer difference (STD) spectra provided clear evidence that the two peptides efficiently bound beta-TrCP receptor protein. To better characterize the ligand-protein interaction, the bound conformation of the phosphorylated peptides was determined using transferred NOESY methods, which gave rise to a well-defined structure. P1 and P2 can fold in a bend arrangement for the DpSG motif, showing the protons identified by STD-NMR as exposed in close proximity at the molecule surface. Ser phosphorylation allows electrostatic interaction and hydrogen bond with the amino acids of the beta-TrCP binding pocket. The upstream LIER hydrophobic region was also essential in binding to a hydrophobic pocket of the beta-TrCP WD domain. These findings are in good agreement with a recently published X-ray structure of a shorter beta-Catenin fragment with the beta-TrCP complex.     

Probing protein-surfactant interaction by steady state and time-resolved fluorescence spectroscopy

The microenvironment of the probe coumarin 153 (C-153) in 1% bovine serum albumin (BSA) is more hydrophobic in nature compared to that in pure micelles or protein-surfactant complexes. In the native state of protein, we have not observed any solvation using C-153 as a probe but we have observed a slow dynamics on protein surface using 8-anilino-1-naphthalenesulfonic acid (ANS) as a probe. This may be due to the location of the probe (C-153) in the hydrophobic, solvent-inaccessible pocket of the BSA. Solvation dynamics in the BSA-surfactant (SDS) complexes in the solution phase is markedly different from that in pure micelles. This is may be due to the formation of 'necklace and bead' structure in the complexes. The rotational motion is also severely hindered in the surface of the protein.