Formulation and <Emphasis Type="Italic">In vitro</Emphasis> Characterization of Eudragit® L100 and Eudragit® L100-PLGA Nanoparticles Containing Diclofenac Sodium

The aim of this study was to formulate and characterize Eudragit® L100 and Eudragit® L100-poly(lactic-co-glycolic acid) (PLGA) nanoparticles containing diclofenac sodium. Diclofenac generates severe adverse effects with risks of toxicity. Thus, nanoparticles were prepared to reduce these drawbacks in the present study. These nanoparticles were evaluated for surface morphology, particle size and size distribution, percentage drug entrapment, and in vitro drug release in pH 6.8. The prepared nanoparticles were almost spherical in shape, as determined by atomic force microscopy. The nanoparticles with varied size (241–274 nm) and 25.8–62% of entrapment efficiency were obtained. The nanoparticles formulations produced the release profiles with an initial burst effect in which diclofenac sodium release ranged between 38% and 47% within 4 h. The extent of drug release from Eudragit® L100 nanoparticles was up to 92% at 12 h. However, Eudragit®/PLGA nanoparticles showed an initial burst release followed by a slower sustained release. The cumulative release at 72 h was 56%, 69%, and 81% for Eudragit®/PLGA (20:80), Eudragit®/PLGA (30:70) and Eudragit®/PLGA (50:50) nanoparticles, respectively. The release profiles and encapsulation efficiencies depended on the amount of Eudragit in the blend. These data demonstrated the efficacy of these nanoparticles in sustaining the diclofenac sodium release profile.     

Fabrication of PLGA nanoparticles with a fluidic nanoprecipitation system

Particle size is a key feature in determining performance of nanoparticles as drug carriers because it influences circulating half-life, cellular uptake and biodistribution. Because the size of particles has such a major impact on their performance, the uniformity of the particle population is also a significant factor. Particles comprised of the polymer poly(lactic-co-glycolic acid) (PLGA) are widely studied as therapeutic delivery vehicles because they are biodegradable and biocompatible. In fact, microparticles comprised of PLGA are already approved for drug delivery. Unfortunately, PLGA nanoparticles prepared by conventional methods usually lack uniformity. We developed a novel Fluidic NanoPrecipitation System (FNPS) to fabricate highly uniform PLGA particles. Several parameters can be fine-tuned to generate particles of various sizes.     

PLGA microsphere construct coated with TGF-beta 3 loaded nanoparticles for neocartilage formation

Polymeric microsphere system has been widely used in tissue-regeneration matrix and drug delivery systems. To apply these biomaterials as novel cell supporting matrix for stem cell delivery, we have devised a novel method for the fabrication of nanostructured 3D scaffolds that growth factor loaded heparin/poly(L-lysine) nanoparticles were physically attached on the positively charged surface of PLGA microspheres precoated with low molecular weight of poly(ethyleneimmine) (PEI) via a layer-by-layer (LbL) system. Based on a previous study, we have prepared poly(lactide-co-glycolide) (PLGA) microspheres harboring heparin/poly(L-lysine) loaded with growth factors. Growth factor loaded heparin/poly(L-lysine) nanoparticles, which were simply produced as polyion complex micelles (PICM) with diameters of 50-150 nm, were fabricated in the first step. Microsphere matrix (size, 20 approximately 80 nm) containing TGF-beta 3 showed a significantly higher number of specific lacunae phenotypes at the end of the 4 week study in vitro culture of mesenchymal stem cells. Thus, growth factor delivery of PLGA microsphere can be used to engineer synthetic extracellular matrix. This PLGA microsphere matrix containing TGF-beta 3 showed promise as coatings for implantable biomedical devices to improve biocompatibility and ensure in vivo performance.     

Nanostructured microspheres produced by supercritical fluid extraction of emulsions

The system poly(lactic-co-glycolic) acid/ piroxicam (PLGA/PX) was selected, as a model system, to evaluate the effectiveness of supercritical carbon dioxide (SC-CO(2)) extraction of the oily phase (ethyl acetate) from oil-in-water emulsions used in the production of polymer/drug microspheres for sustained drug release applications. The influence of process parameters like operating pressure and temperature, flow rate and contacting time between the emulsion and SC-CO(2) was studied with respect to the microsphere size, distribution and solvent residue. Different polymer concentrations in the oily phase were also tested in emulsions formulation to monitor their effects on droplets and microspheres size distribution at fixed mixing conditions. Spherical PLGA microspheres loaded with PX (10% w/w) with mean sizes ranging between 1 and 3 microm and very narrow size distributions were obtained due to the short supercritical processing time (30 min) that prevents the aggregation phenomena typically occurring during conventional solvent evaporation process. A solvent residue smaller than 40 ppm was also obtained at optimized operating conditions. DSC and SEM-EDX analyses confirmed that the produced microparticles are formed by a solid solution of PLGA and PX and that the drug is entrapped in an amorphous state into the polymeric matrix with an encapsulation efficiency in the range of 90-95%. Drug release rate studies showed very uniform drug concentration profiles, without any burst effect, confirming a good dispersion of the drug into the polymer particles.     

A Novel Method for Preparing Surface-Modified Fluocinolone Acetonide Loaded PLGA Nanoparticles for Ocular Use: <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluations

Our objective was to prepare nanoparticulate system using a simple yet attractive innovated method as an ophthalmic delivery system for fluocinolone acetonide to improve its ocular bioavailability. Poly(lactic-co-glycolic acid) (PLGA) nanoparticles were prepared by adopting thin film hydration method using PLGA/poloxamer 407 in weight ratios of 1:5 and 1:10. PLGA was used in 75/25 and 50/50 copolymer molar ratio of DL-lactide/glycolide. Results revealed that using PLGA with lower glycolic acid monomer ratio exhibited high particle size (PS), zeta potential (ZP) and drug encapsulation efficiency (EE) values with slow drug release pattern. Also, doubling the drug concentration during nanoparticles preparation ameliorated its EE to reach almost 100%. Furthermore, studies for separating the un-entrapped drug in nanoparticles using centrifugation method at 20,000 rpm for 30 min showed that the separated clear supernatant contained nanoparticles encapsulating an important drug amount. Therefore, separation of un-entrapped drug was carried out by filtrating the preparation using 20–25 μm pore size filter paper to avoid drug loss. Aiming to increase the PLGA nanoparticles mucoadhesion ability, surface modification of selected formulation was done using different amount of stearylamine and chitosan HCl. Nanoparticles coated with 0.1% w/v chitosan HCl attained most suitable results of PS, ZP and EE values as well as high drug release properties. Transmission electron microphotographs illustrated the deposition of chitosan molecules on the nanoparticles surfaces. Pharmacokinetic studies on Albino rabbit’s eyes using HPLC indicated that the prepared novel chitosan-coated PLGA nanoparticles subjected to separation by filtration showed rapid and extended drug delivery to the eye.     

Targeted novel surface-modified nanoparticles for interferon delivery for the treatment of hepatitis B

The purpose of the present work was to develop hepatitis B surface antigen (HBsAg) surface-adsorbed cationic poly (d,l-lactic-co-glycolic acid) PLGA nanoparticles for interferon alpha (IFNα) delivery targeted to hepatocytes. Cationic PLGA nanoparticles loaded with IFNα were prepared using the double emulsification technique. Delipidated HBsAg was passively adsorbed on the surface of nanoparticles by using the simple dipping and drying method. Surface morphology and size distribution of nanoparticles were analyzed by scanning electron microscopy and dynamic light-scattering method, respectively. The biodistribution behavior of plain and HBsAg-coated (99m)Tc-tagged PLGA nanoparticles was also examined followed by intravenous injection. The results revealed that ～75% of the radioactivity was recovered in the liver after 4 h of injection that was nearly 3-fold greater in magnitude than the plain PLGA nanoparticles. These data demonstrated that the novel formulation of nanoparticles has potential application in hepatic-targeted drug delivery.     

Development of a novel T cell-oriented vaccine using CTL/Th-hybrid epitope long peptide and biodegradable microparticles,against an intracellular bacterium

Antigen-specific CD8+ T-lymphocytes (cytotoxic T-lymphocytes: CTL), as well as CD4+ T-lymphocytes (helper T-lymphocytes: Th), simultaneously play an important role in the elimination of intracellular bacteria such as Mycobacterium tuberculosis and Listeria monocytogenes. Administration of T-cell epitope short peptide needs large numbers of peptides for effective vaccination due to its easily degradable nature in vivo. In this respect, biocompatible and biodegradable microparticles combined with CTL/Th-hybrid epitope long peptide (long peptide) have been used to diminish the degradation of loaded peptide. The aim of this study is to develop a novel T cell-oriented vaccine against intracellular bacteria that is composed of long peptide and poly (lactic-co-glycolic acid) (PLGA) microparticles. Mouse bone marrow-derived dendritic cells (BMDCs) were loaded with L. monocytogenes listeriolysin O (LLO)-derived or ovalbumin (OVA)-derived long peptide/PLGA or other comparative antigens. The antigen-loaded BMDCs were injected subcutaneously into the flank of mice twice, and then, the spleens were collected and lymphocyte proliferation and interferon-γ production were evaluated. The median diameter of the PLGA spheres was 1.38 μm. Both LLO- and OVA-long peptide/PLGA showed significantly more robust CTL and Th proliferations with higher interferon-γ production than the long peptide alone or CTL and Th short peptides/PLGA vaccination. Furthermore, the LLO-long peptide/PLGA vaccination showed a significantly lower bacterial burden in spleens compared with the long peptide alone or the CTL and Th short peptides/PLGA vaccination after the challenge of lethal amounts of L. monocytogenes. These results suggest that the novel vaccine taking advantages of CTL/Th-hybrid epitope long peptide and PLGA microparticle is effective for protection against intracellular bacteria.     

Gelsolin Amyloidogenesis Is Effectively Modulated by Curcumin and Emetine Conjugated PLGA Nanoparticles

Small molecule based therapeutic intervention of amyloids has been limited by their low solubility and poor pharmacokinetic characteristics. We report here, the use of water soluble poly lactic-co-glycolic acid (PLGA)-encapsulated curcumin and emetine nanoparticles (Cm-NPs and Em-NPs, respectively), as potential modulators of gelsolin amyloidogenesis. Using the amyloid-specific dye Thioflavin T (ThT) as an indicator along with electron microscopic imaging we show that the presence of Cm-NPs augmented amyloid formation in gelsolin by skipping the pre-fibrillar assemblies, while Em-NPs induced non-fibrillar aggregates. These two types of aggregates differed in their morphologies, surface hydrophobicity and secondary structural signatures, confirming that they followed distinct pathways. In spite of differences, both these aggregates displayed reduced toxicity against SH-SY5Y human neuroblastoma cells as compared to control gelsolin amyloids. We conclude that the cytotoxicity of gelsolin amyloids can be reduced by either stalling or accelerating its fibrillation process. In addition, Cm-NPs increased the fibrillar bulk while Em-NPs defibrillated the pre-formed gelsolin amyloids. Moreover, amyloid modulation happened at a much lower concentration and at a faster rate by the PLGA encapsulated compounds as compared to their free forms. Thus, besides improving pharmacokinetic and biocompatible properties of curcumin and emetine, PLGA conjugation elevates the therapeutic potential of both small molecules against amyloid fibrillation and toxicity.     

Less harmful acidic degradation of poly(lacticco-glycolic acid) bone tissue engineering scaffolds through titania nanoparticle addition

In the last 10 years, biodegradable aliphatic polyesters, such as poly(lactic-co-glycolic acid) (PLGA), have attracted increasing attention for their use as scaffold materials in bone tissue engineering because their degradation products can be removed by natural metabolic pathways. However, one main concern with the use of these specific polymers is that their degradation products reduce local pH, which in turn induces an inflammatory reaction and damages bone cell health at the implant site. Thus, the objective of the present in vitro study was to investigate the degradation behavior of PLGA when added with dispersed titania nanoparticles. The results of this study provided the first evidence that the increased dispersion of nanophase titania in PLGA decreased the harmful change in pH normal for PLGA degradation. Moreover, previous studies have demonstrated that the increased dispersion of titania nanoparticles into PLGA significantly improved osteoblast (bone-forming cell) functions (such as adhesion, collagen synthesis, alkaline phosphatase activity, and calcium-containing minerals deposition). In this manner, nanophase titania-PLGA composites may be promising scaffold materials for more effective orthopedic tissue engineering applications.     

Cellular uptake of Poly-(D,L-lactide-co-glycolide) (PLGA) nanoparticles synthesized through solvent emulsion evaporation and nanoprecipitation method

Poly-(D,L-lactide-co-glycolide) (PLGA) nanoparticles have been widely studied for drug delivery. The aim of this study is to determine how cellular uptake of these nanoparticles is influenced by different surface properties, incubation time, particle concentration and cell types. Spherical coumarin-6 loaded PLGA nanoparticles with a size of about 100 nm were synthesized through solvent emulsion evaporation and nanoprecipitation methods. In vitro cellular uptake efficiency was determined using human bronchial epithelial cells (BEAS-2B) and murine monocyte-derived macrophage (RAW264.7) cells. PLGA nanoparticles were incubated with these cells in a concentration range of 10-300 μg/ml for different time periods. The results show that cellular uptake decreased for nanoparticles surface coated with PVA surfactant and was especially limited for severely aggregated particles. At higher particle concentration, the total amount of particles taken up by cells increased while the uptake efficiency decreased. In addition, cells could take up more particles with longer incubation time, although the uptake rate decreased gradually with time. Finally, RAW264.7 cells show increased uptake compared to BEAS-2B cells. The information drawn from this study would provide important clues on how nanomaterials interact with cells and how these interactions can influence biocompatibility or toxicity.     

Poly(lactic-co-glycolic acid) nanoparticles as candidate DNA vaccine carrier for oral immunization of Japanese flounder (Paralichthys olivaceus) against lymphocystis disease virus

In order to protect DNA vaccine against degradation in alimentary tract of fish, poly(lactic-co-glycolic acid) (PLGA) nanoparticles encapsulating vaccine were prepared using W/O/W emulsification combined with spray drying technique in our laboratory. The characteristics of PLGA nanoparticles were described as follows: (1) shape, spherical; (2) size, <500 nm; (3) yield, ～96.2%; loading percentage, ～0.5%; encapsulation efficiency, ～63.7%; supercoiled conformation percentage, ～65%; (4) release dynamics, gradual release. In vitro transfection in SISK cells showed that PLGA nanoparticles could be utilized to transfect eukaryotes. After oral administration, FITC-labeled PLGA nanoparticles were detected in blood of fish, and RNA containing major capsid protein (MCP) gene information existed in various tissues of fish 10-90 days. In addition, the analysis of immune parameters in sera of treatment fish showed that: (1) infection rate of LCDV post-challenge, ～16.7%; (2) prophenoloxidase, superoxide dismutase, respiratory burst, lysozyme and antibody levels, increased significantly (p<0.05); (3) activities of serum complement, changed a little (p>0.05). Pearson's correlation displayed that correlation of immune factors mentioned above (not including serum complement) were all positive for fish vaccinated. The data in this study suggested that PLGA nanoparticles were promising carriers for plasmid DNA vaccine and might be used to vaccinate fish by oral approach.     

Development of Vaccine Prototype Against Zika Virus Disease of Peptide-Loaded PLGA Nanoparticles and Evaluation of Cytotoxicity

Zika virus has recently evolved from an obscure mosquito-borne pathogen to an international public health concern. People with Zika virus disease can have indications including mild fever, skin rash, conjunctivitis, muscle pain, malaise or headache. Effective vaccines are needed for controlling and preventing the disease. In the current study, we aim to design the substructure for vaccine against Zika virus by forming antigenic peptide epitope of the disease. Zika peptide loaded poly (lactic-co-glycolic acid) (PLGA) nanoparticles have been fabricated in the present work as a potential artificial vaccine. UV and FT-IR Spectrophotometers and ZetaSizer were used for studying the nanoparticles, and Scanning Electron Microscope was used for morphological examination. The nanoparticles (NPs) yield, encapsulation efficiency, the peptide loading capacity were determined and in vitro release of the peptide was studied. Cytotoxic effects of the various concentrations of Zika peptide, blank PLGA nanoparticles and Zika peptide loaded PLGA nanoparticles on ECV304 human epithelial cells were determined via MTT assay. The present paper could be considered as one of the important steps in the use of nanoparticles for constructing the new generation of vaccination systems.

     

Optimization of Cardiovascular Stent against Restenosis: Factorial Design-Based Statistical Analysis of Polymer Coating Conditions

The objective of this study was to optimize the physicodynamic conditions of polymeric system as a coating substrate for drug eluting stents against restenosis. As Nitric Oxide (NO) has multifunctional activities, such as regulating blood flow and pressure, and influencing thrombus formation, a continuous and spatiotemporal delivery of NO loaded in the polymer based nanoparticles could be a viable option to reduce and prevent restenosis. To identify the most suitable carrier for S-Nitrosoglutathione (GSNO), a NO prodrug, stents were coated with various polymers, such as poly (lactic-co-glycolic acid) (PLGA), polyethylene glycol (PEG) and polycaprolactone (PCL), using solvent evaporation technique. Full factorial design was used to evaluate the effects of the formulation variables in polymer-based stent coatings on the GSNO release rate and weight loss rate. The least square regression model was used for data analysis in the optimization process. The polymer-coated stents were further assessed with Differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy analysis (FTIR), Scanning electron microscopy (SEM) images and platelet adhesion studies. Stents coated with PCL matrix displayed more sustained and controlled drug release profiles than those coated with PLGA and PEG. Stents coated with PCL matrix showed the least platelet adhesion rate. Subsequently, stents coated with PCL matrix were subjected to the further optimization processes for improvement of surface morphology and enhancement of the drug release duration. The results of this study demonstrated that PCL matrix containing GSNO is a promising system for stent surface coating against restenosis.     

Sustained local delivery of insulin for potential improvement of peri-implant bone formation in diabetes

Dental implantation is an effective standard treatment modality to restore missing teeth and maxillofacial defects. However, in diabetics there is an increased risk for implant failure due to impaired peri-implant osseous healing. Early topical insulin treatment was recently shown to normalize diabetic bone healing by rectifying impairments in osteoblastic activities. In this study, insulin/poly(lactic-co-glycolic acid) (PLGA) microspheres were prepared by a double-emulsion solvent evaporation method. Microspheres were then incorporated in fibrin gel to develop a local drug delivery system for diabetic patients requiring implant treatment. In vitro release of insulin from fibrin gel loaded with these microspheres was assessed, and sustained prolonged insulin release over 21 days ascertained. To assess the bioactivity of released insulin and determine whether slow release might improve impaired diabetic bone formation, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), alkaline phosphatase (ALP) activity, mineralized nodule formation, and ELISA (enzyme-linked immunosorbent assay) assays were performed. The insulin released from the drug delivery system stimulated cell growth in previously inhibited cells, and ameliorated the impaired bone-forming ability of human MG-63 cells under high glucose conditions. Fibrin gel loaded with insulin/PLGA microspheres shows potential for improving peri-implant bone formation in diabetic patients.     

PLGA Nanoparticles Formed by Single- or Double-emulsion with Vitamin E-TPGS

Poly(lactic-co-glycolic acid) (PLGA) is a biocompatible member of the aliphatic polyester family of biodegradable polymers. PLGA has long been a popular choice for drug delivery applications, particularly since it is already FDA-approved for use in humans in the form of resorbable sutures. Hydrophobic and hydrophilic drugs are encapsulated in PLGA particles via single- or double-emulsion. Briefly, the drug is dissolved with polymer or emulsified with polymer in an organic phase that is then emulsified with the aqueous phase. After the solvent has evaporated, particles are washed and collected via centrifugation for lyophilization and long term storage. PLGA degrades slowly via hydrolysis in aqueous environments, and encapsulated agents are released over a period of weeks to months. Although PLGA is a material that possesses many advantages for drug delivery, reproducible formation of nanoparticles can be challenging; considerable variability is introduced by the use of different equipment, reagents batch, and precise method of emulsification. Here, we describe in great detail the formation and characterization of microparticles and nanoparticles formed by single- or double-emulsion using the emulsifying agent vitamin E-TPGS. Particle morphology and size are determined with scanning electron microscopy (SEM). We provide representative SEM images for nanoparticles produced with varying emulsifier concentration, as well as examples of imaging artifacts and failed emulsifications. This protocol can be readily adapted to use alternative emulsifiers (e.g. poly(vinyl alcohol), PVA) or solvents (e.g. dichloromethane, DCM).     

聚乳酸羟基乙酸纳米微球在肿瘤药物递送中的应用

药物递送载体的应用使得小分子药物、蛋白质药物,以及基因药物能够通过多种给药方式用于癌症的治疗。聚乳酸-羟基乙酸共聚物因其具有良好的生物相容性及生物可降解性,成为广泛采用的抗癌药物载体之一,可以通过静脉、皮下、口服等多种给药途径用于化疗、基因治疗、蛋白治疗给药及接种免疫等诸多方面,显示了良好的应用前景。     

Diphtheria toxoid loaded poly-(epsilon-caprolactone) nanoparticles as mucosal vaccine delivery systems

Poly-(epsilon-caprolactone) (PCL), a poly(lactide-co-glycolide) (PLGA)-PCL blend and co-polymer nanoparticles encapsulating diphtheria toxoid (DT) were investigated for their potential as a mucosal vaccine delivery system. The nanoparticles, prepared using a water-in-oil-in-water (w/o/w) double emulsion solvent evaporation method, demonstrated release profiles which were dependent on the properties of the polymers. An in vitro experiment using Caco-2 cells showed significantly higher uptake of PCL nanoparticles in comparison to polymeric PLGA, the PLGA-PCL blend and co-polymer nanoparticles. The highest uptake mediated by the most hydrophobic nanoparticles using Caco-2 cells was mirrored in the in vivo studies following nasal administration. PCL nanoparticles induced DT serum specific IgG antibody responses significantly higher than PLGA. A significant positive correlation between hydrophobicity of the nanoparticles and the immune response was observed following intramuscular administration. The positive correlation between hydrophobicity of the nanoparticles and serum DT specific IgG antibody response was also observed after intranasal administration of the nanoparticles. The cytokine assays showed that the serum IgG antibody response induced is different according to the route of administration, indicated by the differential levels of IL-6 and IFN-gamma. The nanoparticles eliciting the highest IgG antibody response did not necessarily elicit the highest levels of the cytokines IL-6 and IFN-gamma.     

Three-dimensional fibrous PLGA/HAp composite scaffold for BMP-2 delivery

A protein loaded three-dimensional scaffold can be used for protein delivery and bone tissue regeneration. The main objective of this project was to develop recombinant human bone morphogenetic protein-2 (rhBMP-2) loaded poly(D,L-lactide-co-glycolide)/hydroxylapatite (PLGA/HAp) composite fibrous scaffolds through a promising fabrication technique, electrospinning. In vitro release of BMP-2 from these scaffolds, and the attachment ability and viability of marrow derived messenchymal stem cells (MSCs) in the presence of the scaffolds were investigated. The PLGA/HAp composite scaffolds developed in this study exhibit good morphology and it was observed that HAp nanoparticles were homogeneously dispersed inside PLGA matrix within the scaffold. The composite scaffolds allowed sustained (2-8 weeks) release of BMP-2 whose release rate was accelerated with increasing HAp content. It was also shown that BMP-2 protein successfully maintained its integrity and natural conformations after undergoing the process of electrospinning. Cell culture experiments showed that the encapsulation of HAp could enhance cell attachment to scaffolds and lower cytotoxicity.     

Lectin-Conjugated Clarithromycin and Acetohydroxamic Acid-Loaded PLGA Nanoparticles: a Novel Approach for Effective Treatment of <Emphasis Type="Italic">H. pylori</Emphasis>

Helicobacter pylori infection remains challenging as it mainly colonized beneath the deep gastric mucosa and adheres to epithelial cells of the stomach. Concanavalin-A (Con-A)-conjugated gastro-retentive poly (lactic-co-glycolic acid) (PLGA) nanoparticles of acetohydroxamic acid (AHA) and clarithromycin (CLR) were prepared and evaluated under in vitro conditions. Solvent evaporation method was employed for preparation of nanoparticles and characterized for particle size distribution, surface morphology, percent drug entrapment, and in vitro drug release in simulated gastric fluid. Optimized nanoparticles were conjugated with Con-A and further characterized for Con-A conjugation efficiency and mucoadhesion and tested for in vitro anti-H. pylori activity. The conjugation with Con-A further sustained the drug release over a period of 8 h when compared to non-conjugated nanoparticles of AHA and CLR. In vitro anti H. pylori study confirmed that Con-A-conjugated nanoparticles containing both drugs, i.e., CLR and AHA, had shown maximum zone of inhibition compared to other formulations. In a nut shell, results suggest that the developed systems could be used for better therapeutic activity against H. pylori infection.     

模拟微重力条件下大鼠肝细胞三维培养支架材料的筛选（简报）

组织工程是一门新兴的边缘学科,它是利用体外培养的人体功能细胞与适当的细胞外基质或支架材料相结合,然后将其移植到体内病损部位以期达到修复目的。微重力组织工程(Microgravity Tissue Engineering)是近年来由美国空间生物技术研究人员开创的一个独特研究领域,其核心技术是